event_notifier_test_and_clear must be called before processing events.
Otherwise, an aio_poll could "eat" the notification before the main
I/O thread invokes ppoll(). The main I/O thread then never wakes up.
This is an example of what could happen:
i/o thread vcpu thread worker thread
---------------------------------------------------------------------
lock_iothread
notify_me = 1
...
unlock_iothread
bh->scheduled = 1
event_notifier_set
lock_iothread
notify_me = 3
ppoll
notify_me = 1
aio_dispatch
aio_bh_poll
thread_pool_completion_bh
bh->scheduled = 1
event_notifier_set
node->io_read(node->opaque)
event_notifier_test_and_clear
ppoll
*** hang ***
"Tracing" with qemu_clock_get_ns shows pretty much the same behavior as
in the previous bug, so there are no new tricks here---just stare more
at the code until it is apparent.
One could also use a formal model, of course. The included one shows
this with three processes: notifier corresponds to a QEMU thread pool
worker, temporary_waiter to a VCPU thread that invokes aio_poll(),
waiter to the main I/O thread. I would be happy to say that the
formal model found the bug for me, but actually I wrote it after the
fact.
This patch is a bit of a big hammer. The next one optimizes it,
with help (this time for real rather than a posteriori :)) from
another, similar formal model.
Reported-by: Richard W. M. Jones <rjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 1437487673-23740-6-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch rewrites the ctx->dispatching optimization, which was the cause
of some mysterious hangs that could be reproduced on aarch64 KVM only.
The hangs were indirectly caused by aio_poll() and in particular by
flash memory updates's call to blk_write(), which invokes aio_poll().
Fun stuff: they had an extremely short race window, so much that
adding all kind of tracing to either the kernel or QEMU made it
go away (a single printf made it half as reproducible).
On the plus side, the failure mode (a hang until the next keypress)
made it very easy to examine the state of the process with a debugger.
And there was a very nice reproducer from Laszlo, which failed pretty
often (more than half of the time) on any version of QEMU with a non-debug
kernel; it also failed fast, while still in the firmware. So, it could
have been worse.
For some unknown reason they happened only with virtio-scsi, but
that's not important. It's more interesting that they disappeared with
io=native, making thread-pool.c a likely suspect for where the bug arose.
thread-pool.c is also one of the few places which use bottom halves
across threads, by the way.
I hope that no other similar bugs exist, but just in case :) I am
going to describe how the successful debugging went... Since the
likely culprit was the ctx->dispatching optimization, which mostly
affects bottom halves, the first observation was that there are two
qemu_bh_schedule() invocations in the thread pool: the one in the aio
worker and the one in thread_pool_completion_bh. The latter always
causes the optimization to trigger, the former may or may not. In
order to restrict the possibilities, I introduced new functions
qemu_bh_schedule_slow() and qemu_bh_schedule_fast():
/* qemu_bh_schedule_slow: */
ctx = bh->ctx;
bh->idle = 0;
if (atomic_xchg(&bh->scheduled, 1) == 0) {
event_notifier_set(&ctx->notifier);
}
/* qemu_bh_schedule_fast: */
ctx = bh->ctx;
bh->idle = 0;
assert(ctx->dispatching);
atomic_xchg(&bh->scheduled, 1);
Notice how the atomic_xchg is still in qemu_bh_schedule_slow(). This
was already debated a few months ago, so I assumed it to be correct.
In retrospect this was a very good idea, as you'll see later.
Changing thread_pool_completion_bh() to qemu_bh_schedule_fast() didn't
trigger the assertion (as expected). Changing the worker's invocation
to qemu_bh_schedule_slow() didn't hide the bug (another assumption
which luckily held). This already limited heavily the amount of
interaction between the threads, hinting that the problematic events
must have triggered around thread_pool_completion_bh().
As mentioned early, invoking a debugger to examine the state of a
hung process was pretty easy; the iothread was always waiting on a
poll(..., -1) system call. Infinite timeouts are much rarer on x86,
and this could be the reason why the bug was never observed there.
With the buggy sequence more or less resolved to an interaction between
thread_pool_completion_bh() and poll(..., -1), my "tracing" strategy was
to just add a few qemu_clock_get_ns(QEMU_CLOCK_REALTIME) calls, hoping
that the ordering of aio_ctx_prepare(), aio_ctx_dispatch, poll() and
qemu_bh_schedule_fast() would provide some hint. The output was:
(gdb) p last_prepare
$3 = 103885451
(gdb) p last_dispatch
$4 = 103876492
(gdb) p last_poll
$5 = 115909333
(gdb) p last_schedule
$6 = 115925212
Notice how the last call to qemu_poll_ns() came after aio_ctx_dispatch().
This makes little sense unless there is an aio_poll() call involved,
and indeed with a slightly different instrumentation you can see that
there is one:
(gdb) p last_prepare
$3 = 107569679
(gdb) p last_dispatch
$4 = 107561600
(gdb) p last_aio_poll
$5 = 110671400
(gdb) p last_schedule
$6 = 110698917
So the scenario becomes clearer:
iothread VCPU thread
--------------------------------------------------------------------------
aio_ctx_prepare
aio_ctx_check
qemu_poll_ns(timeout=-1)
aio_poll
aio_dispatch
thread_pool_completion_bh
qemu_bh_schedule()
At this point bh->scheduled = 1 and the iothread has not been woken up.
The solution must be close, but this alone should not be a problem,
because the bottom half is only rescheduled to account for rare situations
(see commit 3c80ca1, thread-pool: avoid deadlock in nested aio_poll()
calls, 2014-07-15).
Introducing a third thread---a thread pool worker thread, which
also does qemu_bh_schedule()---does bring out the problematic case.
The third thread must be awakened *after* the callback is complete and
thread_pool_completion_bh has redone the whole loop, explaining the
short race window. And then this is what happens:
thread pool worker
--------------------------------------------------------------------------
<I/O completes>
qemu_bh_schedule()
Tada, bh->scheduled is already 1, so qemu_bh_schedule() does nothing
and the iothread is never woken up. This is where the bh->scheduled
optimization comes into play---it is correct, but removing it would
have masked the bug.
So, what is the bug?
Well, the question asked by the ctx->dispatching optimization ("is any
active aio_poll dispatching?") was wrong. The right question to ask
instead is "is any active aio_poll *not* dispatching", i.e. in the prepare
or poll phases? In that case, the aio_poll is sleeping or might go to
sleep anytime soon, and the EventNotifier must be invoked to wake
it up.
In any other case (including if there is *no* active aio_poll at all!)
we can just wait for the next prepare phase to pick up the event (e.g. a
bottom half); the prepare phase will avoid the blocking and service the
bottom half.
Expressing the invariant with a logic formula, the broken one looked like:
!(exists(thread): in_dispatching(thread)) => !optimize
or equivalently:
!(exists(thread):
in_aio_poll(thread) && in_dispatching(thread)) => !optimize
In the correct one, the negation is in a slightly different place:
(exists(thread):
in_aio_poll(thread) && !in_dispatching(thread)) => !optimize
or equivalently:
(exists(thread): in_prepare_or_poll(thread)) => !optimize
Even if the difference boils down to moving an exclamation mark :)
the implementation is quite different. However, I think the new
one is simpler to understand.
In the old implementation, the "exists" was implemented with a boolean
value. This didn't really support well the case of multiple concurrent
event loops, but I thought that this was okay: aio_poll holds the
AioContext lock so there cannot be concurrent aio_poll invocations, and
I was just considering nested event loops. However, aio_poll _could_
indeed be concurrent with the GSource. This is why I came up with the
wrong invariant.
In the new implementation, "exists" is computed simply by counting how many
threads are in the prepare or poll phases. There are some interesting
points to consider, but the gist of the idea remains:
1) AioContext can be used through GSource as well; as mentioned in the
patch, bit 0 of the counter is reserved for the GSource.
2) the counter need not be updated for a non-blocking aio_poll, because
it won't sleep forever anyway. This is just a matter of checking
the "blocking" variable. This requires some changes to the win32
implementation, but is otherwise not too complicated.
3) as mentioned above, the new implementation will not call aio_notify
when there is *no* active aio_poll at all. The tests have to be
adjusted for this change. The calls to aio_notify in async.c are fine;
they only want to kick aio_poll out of a blocking wait, but need not
do anything if aio_poll is not running.
4) nested aio_poll: these just work with the new implementation; when
a nested event loop is invoked, the outer event loop is never in the
prepare or poll phases. The outer event loop thus has already decremented
the counter.
Reported-by: Richard W. M. Jones <rjones@redhat.com>
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 1437487673-23740-5-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This reverts commit 830d70db69.
The interface isn't fully backwards-compatible, which is bad.
Let's redo this properly after 2.4.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A few last minute PPC changes for 2.4:
- spapr: Update SLOF
- spapr: Fix a few bugs
- spapr: Preparation for hotplug
- spapr: Minor code cleanups
- linux-user: Add mftb handling
- kvm: Enable hugepage support with memory-backend-file
- mac99: Remove nonexistent interrupt pin (Mac OS 9 fix)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=+Uma
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging
Patch queue for ppc - 2015-07-07
A few last minute PPC changes for 2.4:
- spapr: Update SLOF
- spapr: Fix a few bugs
- spapr: Preparation for hotplug
- spapr: Minor code cleanups
- linux-user: Add mftb handling
- kvm: Enable hugepage support with memory-backend-file
- mac99: Remove nonexistent interrupt pin (Mac OS 9 fix)
# gpg: Signature made Tue Jul 7 16:48:41 2015 BST using RSA key ID 03FEDC60
# gpg: Good signature from "Alexander Graf <agraf@suse.de>"
# gpg: aka "Alexander Graf <alex@csgraf.de>"
* remotes/agraf/tags/signed-ppc-for-upstream: (30 commits)
sPAPR: Clear stale MSIx table during EEH reset
sPAPR: Reenable EEH functionality on reboot
sPAPR: Don't enable EEH on emulated PCI devices
spapr-vty: Use TYPE_ definition instead of hardcoding
spapr_vty: lookup should only return valid VTY objects
spapr_pci: drop redundant args in spapr_[populate, create]_pci_child_dt
spapr_pci: populate ibm,loc-code
spapr_pci: enumerate and add PCI device tree
xics_kvm: Don't enable KVM_CAP_IRQ_XICS if already enabled
ppc: Update cpu_model in MachineState
spapr: Consolidate cpu init code into a routine
spapr: Reorganize CPU dt generation code
cpus: Add a macro to walk CPUs in reverse
spapr: Support ibm, lrdr-capacity device tree property
spapr: Consider max_cpus during xics initialization
Revert "hw/ppc/spapr_pci.c: Avoid functions not in glib 2.12 (g_hash_table_iter_*)"
spapr_iommu: translate sPAPRTCEAccess to IOMMUAccessFlags
spapr_iommu: drop erroneous check in h_put_tce_indirect()
spapr_pci: set device node unit address as hex
spapr_pci: encode class code including Prog IF register
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ksVw
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20150707' into staging
migration/next for 20150707
# gpg: Signature made Tue Jul 7 13:56:30 2015 BST using RSA key ID 5872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
* remotes/juanquintela/tags/migration/20150707: (28 commits)
migration: extend migration_bitmap
migration: protect migration_bitmap
check_section_footers: Check the correct section_id
migration: Add migration events on target side
migration: Make events a capability
migration: create migration event
migration: No need to call trace_migrate_set_state()
migration: Use always helper to set state
migration: ensure we start in NONE state
migration: Use cmpxchg correctly
migration: Add configuration section
vmstate: Create optional sections
global_state: Make section optional
migration: create new section to store global state
runstate: migration allows more transitions now
runstate: Add runstate store
Fix older machine type compatibility on power with section footers
Fail more cleanly in mismatched RAM cases
Sanity check RDMA remote data
Sort destination RAMBlocks to be the same as the source
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for ibm,lrdr-capacity since this is needed by the guest
kernel to know about the possible hot-pluggable CPUs and Memory. With
this, pseries kernels will start reporting correct maxcpus in
/sys/devices/system/cpu/possible.
Also define the minimum hotpluggable memory size as 256MB.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: Fix compile error on 32bit hosts]
Signed-off-by: Alexander Graf <agraf@suse.de>
We have one argument that tells us what event has happened.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
For pkts copied to the CPU (to be processed by guest driver), mark the Rx
descriptor with flag "OFFLOAD_FWD" to indicate device has already forwarded
pkt. The guest driver will use this indicator to avoid duplicate
forwarding in the guest OS.
Examples include bcast/mcast/unknown ucast pkts flooded to bridged ports.
We want to avoid both the device and the guest bridge driver flooding these
pkts, which would result in duplicates pkts on the wire. Packet sampling,
such as sFlow, can also use this technique to mark pkts for the guest OS to
record but otherwise drop.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Message-id: 1435746792-41278-5-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add display and head properties for input routing to
virtio-input devices, update multiseat documentation.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If we wish to make differential backups a feature that's easy to access,
it might be pertinent to rename the "dirty-bitmap" mode to "incremental"
to make it clear what /type/ of backup the dirty-bitmap is helping us
perform.
This is an API breaking change, but 2.4 has not yet gone live,
so we have this flexibility.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1433463642-21840-2-git-send-email-jsnow@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Simplifies multiseat configuration, see
docs/multiseat.txt update for details.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 87a560c4 added it in the wrong place. Commit 59a2c4ce added it
in the right place, but didn't remove it from the wrong place. Do
that now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJVetcwAAoJEJykq7OBq3PI+84IAMfkE0uCXdUbp3jZP9iVx68y
ZtHbhpnZle3bmVFBkgsF8vHWsMlxMZzr2PpAl02VXrrE6z0ScTz+GmVU2V89Y5nv
kn9DhAR4gcyKbKKgRtwjCLMoCfxsdaHTOJXfcHhsiqQP4PwdFkV6bQAymwcJegY/
ze5wKX8XqIML6yUCnhrN41pjt6NkIQoyRneLwX5ymeRLfWg23i9YOVU4Njmm9X52
kH7Xg0UuT6HTyyNER7iqwh61gQ33ETkfWd9UrHFGi7q70UJAr+cVXtzJjqnh08OU
BExph/lQfxXuivpiThvjZkPvMVqISyCrsIAXrwjhXnjqwz/3nt3i6zrfvPNNPG0=
=VdKf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into staging
# gpg: Signature made Fri Jun 12 13:57:20 2015 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/net-pull-request:
qmp/hmp: add rocker device support
rocker: bring link up/down on PHY enable/disable
rocker: update tests using hw-derived interface names
rocker: Add support for phys name
iohandler: Change return type of qemu_set_fd_handler to "void"
event-notifier: Always return 0 for posix implementation
xen_backend: Remove unused error handling of qemu_set_fd_handler
oss: Remove unused error handling of qemu_set_fd_handler
alsaaudio: Remove unused error handling of qemu_set_fd_handler
main-loop: Drop qemu_set_fd_handler2
Change qemu_set_fd_handler2(..., NULL, ...) to qemu_set_fd_handler
tap: Drop tap_can_send
net/socket: Drop net_socket_can_send
netmap: Drop netmap_can_send
l2tpv3: Drop l2tpv3_can_send
stubs: Add qemu_set_fd_handler
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add ROCKER_TLV_CMD_PORT_SETTINGS_PHYS_NAME to port settings. This attribute
exports the port name to the guest OS allowing it to name interfaces with
sensible defaults.
Mostly done by Scott for phys_id support; adapted to phys_name by David.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1433985681-56138-2-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We create optional sections with this patch. But we already have
optional subsections. Instead of having two mechanism that do the
same, we can just generalize it.
For subsections we just change:
- Add a needed function to VMStateDescription
- Remove VMStateSubsection (after removal of the needed function
it is just a VMStateDescription)
- Adjust the whole tree, moving the needed function to the corresponding
VMStateDescription
Signed-off-by: Juan Quintela <quintela@redhat.com>
Allow user supplied files to be inserted into the fw_cfg
device before starting the guest. Since fw_cfg_add_file()
already disallows duplicate fw_cfg file names, qemu will
exit with an error message if the user supplies multiple
blobs with the same fw_cfg file name, or if a blob name
collides with a fw_cfg name programmatically added from
within the QEMU source code. A warning message will be
printed if the fw_cfg item name does not begin with the
prefix "opt/", which is recommended for external, user
provided blobs.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This includes pxb support by Marcel, as well as multiple enhancements all over
the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVcC2WAAoJECgfDbjSjVRpwgcH/3mvFP3UmvmXyzf8mYtQ/1fR
ikvdTGHl2DR7TMQszNeCJn/p6NgH3oXRbXh39xM1xl9D2/dsZH9o1cUyFE04K9LK
am0cTmlty1OEyFN8BX1TtpngUxa5mpRA/+NYuWbh1FoTp6RoEPM6P+L1zLqtXYn1
REF++ehrsQI2Az2pibf4nul8bwuTWJLJeMS6TcCVCRGoaHsCESiVMu2sQrzEbWEW
E8ZWaXaiycLxLkW0/oU8BmZyrAk1PHdHwgbMUINV0kV5E2u+ZU+3KY79ezC2FyHW
NV7G9Rhh/5H828/cB6UP4CPZ4AYIYmg02iz5XBGKbd8WS9oPrJVK7EoqfU3oZfc=
=5AmP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, acpi, virtio, tpm
This includes pxb support by Marcel, as well as multiple enhancements all over
the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu Jun 4 11:51:02 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (28 commits)
vhost: logs sharing
hw/acpi: piix4_pm_init(): take fw_cfg object no more
hw/acpi: move "etc/system-states" fw_cfg file from PIIX4 to core
hw/acpi: acpi_pm1_cnt_init(): take "disable_s3" and "disable_s4"
pc-dimm: don't assert if pc-dimm alignment != hotpluggable mem range size
docs: Add PXB documentation
apci: fix PXB behaviour if used with unsupported BIOS
hw/pxb: add numa_node parameter
hw/pci: add support for NUMA nodes
hw/pxb: add map_irq func
hw/pci: inform bios if the system has extra pci root buses
hw/pci: introduce PCI Expander Bridge (PXB)
hw/pci: removed 'rootbus nr is 0' assumption from qmp_pci_query
hw/acpi: remove from root bus 0 the crs resources used by other buses.
hw/acpi: add _CRS method for extra root busses
hw/apci: add _PRT method for extra PCI root busses
hw/acpi: add support for i440fx 'snooping' root busses
hw/pci: extend PCI config access to support devices behind PXB
hw/i386: query only for q35/pc when looking for pci host bridge
hw/pci: made pci_bus_num a PCIBusClass method
...
Conflicts:
hw/i386/pc_piix.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds a general overview of hotplug/dynamic-reconfiguration
for sPAPR/pSeries guest.
As specified in PAPR+ v2.7.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Based on patch by Nikolay Nikolaev:
Vhost-user will implement the multi queue support in a similar way
to what vhost already has - a separate thread for each queue.
To enable the multi queue functionality - a new command line parameter
"queues" is introduced for the vhost-user netdev.
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Mandatory option is silly, and the error handling is missing: the
programs crash when -i isn't supplied. Make it an argument, and check
it properly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Event name for hot unplug errors was wrong.
Make doc match code.
Cc: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Memory hot-unplug support for pc, MSI-X
mapping update speedup for virtio-pci,
misc refactorings and bugfixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVUFj/AAoJECgfDbjSjVRpteQH+gKoOMKilM6qvgdQS9vduFJ+
lDHNnmfgzWjVMEetiUOc9hImfEEyTyDFrkSI3wf4a8RZ7UnnDKD8hZR1nToySJPd
SuDP/EdtXYtInIMjc1MUUrJEP6qtjjgM+IbikVzHDxCeekrTMFz2w05MZ+V+hxI5
8b8ndPNfjX3ciIRjHKZ2u6hKEemhzxr1yyKTnJVGDN07hmfMbCyLsiWnFfShZwfv
g7USgiXjFfpvU5Q7QWpiCapfAaEpevRqieGzRjSbPy5Frm3XT7v+hWbFnvIJqUPj
5/SMV8I4qtKQe15Qah292HB//oaFM/AvRtHWvQkre3YIqFwyCYimQtjqoRCYC1E=
=x0ub
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, virtio enhancements
Memory hot-unplug support for pc, MSI-X
mapping update speedup for virtio-pci,
misc refactorings and bugfixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon May 11 08:23:43 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (28 commits)
acpi: update expected files for memory unplug
virtio-scsi: Move DEFINE_VIRTIO_SCSI_FEATURES to virtio-scsi
virtio-net: Move DEFINE_VIRTIO_NET_FEATURES to virtio-net
pci: Merge pci_nic_init() into pci_nic_init_nofail()
acpi: add a missing backslash to the \_SB scope.
qmp-event: add event notification for memory hot unplug error
acpi: add hardware implementation for memory hot unplug
acpi: fix "Memory device control fields" register
acpi: extend aml_field() to support UpdateRule
acpi, mem-hotplug: add unplug cb for memory device
acpi, mem-hotplug: add unplug request cb for memory device
acpi, mem-hotplug: add acpi_memory_slot_status() to get MemStatus
docs: update documentation for memory hot unplug
virtio: coding style tweak
pci: remove hard-coded bar size in msix_init_exclusive_bar()
virtio-pci: speedup MSI-X masking and unmasking
virtio: introduce vector to virtqueues mapping
virtio-ccw: using VIRTIO_NO_VECTOR instead of 0 for invalid virtqueue
monitor: check return value of qemu_find_net_clients_except()
monitor: replace the magic number 255 with MAX_QUEUE_NUM
...
Conflicts:
hw/s390x/s390-virtio-bus.c
[PMM: fixed conflict in s390_virtio_scsi_properties and
s390_virtio_net_properties arrays; since the result of the
two conflicting patches is to empty the property arrays
completely, the conflict resolution is to remove them entirely.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the register programming guide for the Rocker device. It's intended
for driver writers and device writers. It covers the device's PCI space,
the register set, DMA interface, and interrupts.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Message-id: 1426306173-24884-4-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Label the "size" and "offset" fields in BLOCK_IMAGE_CORRUPTED as
optional, and clarify that the latter refers to the host's offset into
the image.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Give some details about the multiple thread (de)compression and
how to use it in live migration.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Reviewed-by: Dr.David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We have more than one qapi schema in use by more than one protocol.
Add a new term 'Client JSON Protocol' for use throughout the
document, to avoid confusion on whether something refers only to
QMP and not QGA.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Referring to "type" as both a meta-type (built-in, enum, union,
alternate, or struct) and a specific type (the name that the
schema uses for declaring structs) is confusing. Now that the
generator accepts 'struct' as a synonym for 'type', update all
documentation to use saner wording.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The next patch will quit special-casing "'union':'Foo',
'discriminator':{}" and instead use "'alternate':'Foo'".
Separating docs from implementation makes it easier to focus
on wording without holding up code. In particular, making
alternate a separate type makes for a nice type hierarchy:
/-------- meta-type ------\
/ | \
simple types alternate complex types
| | | |
built-in enum type(struct) union
| \ / / \
numeric string simple flat
A later patch will then clean up 'type' vs. 'struct'
confusion.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Go into more details about the various types of valid expressions
in a qapi schema, including tweaks to document fixes being done
later in the current patch series. Also fix some stale and missing
documentation in the QMP specification.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
While our top-level COPYING with its GPLv2+ license applies to
any documentation file that omits explicit instructions, these
days it's better to be a good example of calling out our
intentions. Correct use of GPL requires the use of a copyright
statement, so I'm adding notice to two QAPI documents, by
attributing these files to the initial authors and major
contributors. I used:
$ git blame --line-porcelain $file \
| sed -n 's/^author //p' | sort | uniq -c | sort -rn
to determine authorship of these two files. qmp-spec.txt blames
entirely to Red Hat (easy, since my contribution falls in that
category); while qapi-code-gen.txt has multiple contributors
representing multiple entities. But since it was originally
supplied by Michael Roth, the notice I added there copies the
notice he has used in other files. As there is no intended
change in license from the implicit one previously present from
the top level, I have not bothered to CC other contributors;
if we want to weaken things to something looser (such as LGPL)
so that there is no question that someone re-implementing the
spec is not forced to use GPL, that would be a different commit.
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1429314609-29776-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since this event can occur in nodes that cannot have a device name
associated, include also a field with the node name.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 147cec5b3594f4bec0cb41c98afe5fcbfb67567c.1428485266.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When memory hot unplug fails, this patch adds support to send
QMP event to notify mgmt about this failure.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- implements QEMU hardware part of memory hot unplug protocol
described at "docs/spec/acpi_mem_hotplug.txt"
- handles memory remove notification event
- handles device eject notification
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
0 bit in Memory device control fields must be cleared before writing to
register. But now this field isn't cleared when other fields are written.
To solve this bug, This patch fixes UpdateRule to WriteAsZeros in "Memory
device control fields" register.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add specification about how to use memory hot unplug, and add
a flow diagram to explain memory hot unplug process.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This document covers the guest-side hardware interface, as
well as the host-side programming API of QEMU's firmware
configuration (fw_cfg) device.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This document describes how to use memory hotplug in QEMU.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paulo Vital <paulo.vital@profitbricks.com>
Now that objects actually obey the rules, document them.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Asynchronous callbacks provided by call_rcu are particularly important
for QEMU, because the BQL makes it hard to use synchronize_rcu.
In addition, the current RCU implementation is not particularly friendly
to multiple concurrent synchronize_rcu callers, making call_rcu even
more important.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This includes a (mangled) copy of the liburcu code. The main changes
are: 1) removing dependencies on many other header files in liburcu; 2)
removing for simplicity the tentative busy waiting in synchronize_rcu,
which has limited performance effects; 3) replacing futexes in
synchronize_rcu with QemuEvents for Win32 portability. The API is
the same as liburcu, so it should be possible in the future to require
liburcu on POSIX systems for example and use our copy only on Windows.
Among the various versions available I chose urcu-mb, which is the
least invasive implementation even though it does not have the
fastest rcu_read_{lock,unlock} implementation. The urcu flavor can
be changed later, after benchmarking.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I am using qemu for teaching the Linux kernel at our university. I
wrote a simple PCI device that can answer to writes/reads, generate
interrupts and perform DMA. As I am dragging it locally over 2 years,
I am sending it to you now.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
[Fix 32-bit compilation. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid hot pages being replaced by others to remarkably decrease cache
misses
Sample results with the test program which quote from xbzrle.txt ran in
vm:(migrate bandwidth:1GE and xbzrle cache size 8MB)
the test program:
include <stdlib.h>
include <stdio.h>
int main()
{
char *buf = (char *) calloc(4096, 4096);
while (1) {
int i;
for (i = 0; i < 4096 * 4; i++) {
buf[i * 4096 / 4]++;
}
printf(".");
}
}
before this patch:
virsh qemu-monitor-command test_vm '{"execute": "query-migrate"}'
{"return":{"expected-downtime":1020,"xbzrle-cache":{"bytes":1108284,
"cache-size":8388608,"cache-miss-rate":0.987013,"pages":18297,"overflow":8,
"cache-miss":1228737},"status":"active","setup-time":10,"total-time":52398,
"ram":{"total":12466991104,"remaining":1695744,"mbps":935.559472,
"transferred":5780760580,"dirty-sync-counter":271,"duplicate":2878530,
"dirty-pages-rate":29130,"skipped":0,"normal-bytes":5748592640,
"normal":1403465}},"id":"libvirt-706"}
18k pages sent compressed in 52 seconds.
cache-miss-rate is 98.7%, totally miss.
after optimizing:
virsh qemu-monitor-command test_vm '{"execute": "query-migrate"}'
{"return":{"expected-downtime":2054,"xbzrle-cache":{"bytes":5066763,
"cache-size":8388608,"cache-miss-rate":0.485924,"pages":194823,"overflow":0,
"cache-miss":210653},"status":"active","setup-time":11,"total-time":18729,
"ram":{"total":12466991104,"remaining":3895296,"mbps":937.663549,
"transferred":1615042219,"dirty-sync-counter":98,"duplicate":2869840,
"dirty-pages-rate":58781,"skipped":0,"normal-bytes":1588404224,
"normal":387794}},"id":"libvirt-266"}
194k pages sent compressed in 18 seconds.
The value of cache-miss-rate decrease to 48.59%.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The rocker device uses same PCI device ID as sdhci. Since rocker device driver
has already been accepted into Linux 3.18, and REDHAT_SDHCI device ID isn't
used by any drivers, it's safe to move REDHAT_SDHCI device ID, avoiding
conflict with rocker.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the example trace configure option.
Update the text to say that multiple backends are allowed and what
happens when multiple backends are enabled.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1412691161-31785-1-git-send-email-dgilbert@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
MAINTAINERS updates, and AVX512 support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUTmDNAAoJEL/70l94x66DPb0IAKKhf8IRfQZPEQgOWD2YeANd
vwAZ4JcqAl2/dbeOTrs5TXOWdoNVXUFDmeHh4zsgUB7poxsOqZ/M7N844UGR5duC
f4fKYXAkjyqocKH7dbpf/S+YuJtU40qowI02HQeEmGpZaJUjmfMAFwrguqerdMaB
pGA79948XeoAjP8jNgf1EqCqLi31GBEfiU2q05xLKxd+M0xSFIM7IM2hGZfFv7Hq
bbE2CGuCyj4NST/GH2C/22QBz9MyqFaL2prtDqoMugAHTKE7vO/rpFti9oTDRCXa
x8U/JcBf/puBNI+Kq+cdxTJicwIuqrcBkNmjP9sLv/nJ37QwEG06VDCd4Xj9mEs=
=zXqD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
virtio-scsi fixes, the first part of dynamic sysbus devices,
MAINTAINERS updates, and AVX512 support.
# gpg: Signature made Mon 27 Oct 2014 15:12:13 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (28 commits)
aio / timers: De-document -clock
hw/scsi/virtio-scsi.c: fix the "type" use error in virtio_scsi_handle_ctrl
virtio-scsi: sense in virtio_scsi_command_complete
target-i386: add Intel AVX-512 support
get_maintainer.pl: restrict cases where it falls back to --git
get_maintainer.pl: move git loop under "if ($email) {"
qtest: fix qtest log fd should be initialized before qtest chardev
MAINTAINERS: avoid M entries that point to mailing lists
MAINTAINERS: add some tests directories
MAINTAINERS: Add more TCG files
MAINTAINERS: add myself for X86
MAINTAINERS: add Samuel Thibault as usb-serial.c and baum.c maintainer
MAINTAINERS: grab more files from Anthony's pile
target-i386: warns users when CPU threads>1 for non-Intel CPUs
sysbus: Use TYPE_DEVICE GPIO functionality
qdev: gpio: Define qdev_pass_gpios()
qdev: gpio: Remove qdev_init_gpio_out x1 restriction
qdev: gpio: delete NamedGPIOList::out
irq: Remove qemu_irq_intercept_out
qtest/irq: Rework IRQ interception
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 6d32717 "aio / timers: Remove alarm timers" has issues:
1. It silently ignores -clock for backward compatibility.
Incompatible change: -clock help no longer terminates the program.
Tolerable.
2. Failed to update option documentation. In particular, -help still
advises users to try -clock help for available timers. Drop all
documentation on -clock.
3. The 'query-alarm-clock' example in docs/writing-commands.txt no
longer works, and needs to be redone. Can't do that right now, so I
just stick in a FIXME.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Specify the upper limit of refcount_order to be 6 (that is,
refcount_bits = 64). Any larger value does not make much sense when all
offsets, sizes, cluster counts etc. "only" have a width of 64 bit as
well, and very large values would be very difficult to support.
Therefore, just cap it at the largest reasonable value.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A refblock entry may have a different size than 16 bits, it may even be
smaller than a byte. Correct the refcount_block_entries calculation
accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I'll use it with block backends shortly, and the name is going to fit
badly there. It's a block layer thing anyway, not just a block driver
thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I'll use BlockDriverAIOCB with block backends shortly, and the name is
going to fit badly there. It's a block layer thing anyway, not just a
block driver thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a qemu extented register range to the standard vga mmio bar.
Right nowe there are two registers: One readonly register returning the
size of the region (so we can easily add more registers there if needed)
and one endian control register, so guests (especially ppc) can flip
the framebuffer endianness as they need it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJUJbcwAAoJEH8JsnLIjy/WmckP/RBMK3gkr2aArp0k/sbdFcnW
D7GusGkoj1jXRVFKuG3d+T/nozJTX0mkfnaRo8QCg/5VVJtqeHfsfY6JHgppQEai
C5Z8gtzIFxsQNE0/8d2D6zJMnqsIeXAVtDONWgWcDOZstVXn+KEKOw5E3KCZeGxF
yLA+h4h8sncT3ysPE0/jnQqeIwGJpLusFXmICiRY2lXRcCgY/qniymUq25FZO69m
Isw8iVHrUr05u1kfthdQeSAmdPQqI5tK5siR4CERtO2XdlyiODmdo5DRZmATfGiL
CGUIJd30mvrKpqRpIk8gbuGEtz92RuTnyoi9xkLcKi52eWyflGH4gjN3ojYe5Pro
hRY06AcwI9lAVjCy7lKPO6dJn8RWOi/wkgfffK0CFujlo8r1BtwfCW0Y9koYuhdq
mM/K0IEbjNgOvacHLIMOTQuKz3DLv7QB8wZQ+cTkdmvC6kNGnqD9yrA4cAQP4kjR
wjm/WfDIRKPif6cMwgaOiQeNaL0VF2LIn4GRWgaiIqEYfcKzy65uBFoPqOlAoXr8
NtTzCIXDIBbTSzz3VLBKD22FOsP0pfPrMeXkf+GwJwStKMcp6PGY4iUd3+M3bfOP
iUsxTJ4Uw5zMg0MgOaaWnUaDdbRtKGtH1y2UA+4X3gO+3W8Vz0e8B5cPMBqN/mpy
lUS4mBA08mTvaLE520rp
=ManP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Fri 26 Sep 2014 19:57:52 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream:
qemu-iotests: Fail test if explicit test case number is unknown
block: Validate node-name
vpc: fix beX_to_cpu() and cpu_to_beX() confusion
docs: add blkdebug block driver documentation
block: Catch simultaneous usage of options and their aliases
block: Specify -drive legacy option aliases in array
block: Improve message for device name clashing with node name
qemu-nbd: Destroy the BlockDriverState properly
block: Keep DriveInfo alive until BlockDriverState dies
blockdev: Disentangle BlockDriverState and DriveInfo creation
blkdebug: show an error for invalid event names
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 21cd70d added event support but didn't document what the
generated code looks like. Commit 05dfb26 removed some unwanted
spaces in the generated code, but didn't reflect those changes
into the documentation. Finally, the docs start with a big
disclaimer about QMP not using QAPI yet, which feels rather stale.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When user used the trace print command from docs/tracing.txt:
./scripts/simpletrace.py trace-events trace-*
the user maybe be misled by the "trace-*", because if user
directly copy the comand line to run, there alway print the
bored message:
"usage: ./scripts/simpletrace.py <trace-events> <trace-file>"
then we should describe that the "trace-*" represented.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The blkdebug block driver is undocumented. Documenting it is worthwhile
since it offers powerful error injection features that are used by
qemu-iotests test cases.
This document will make it easier for people to learn about and use
blkdebug.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since we have supported memory hotplug, VM's ram include pc.ram
and hotplug-memory.
Fix the confused description for rdma migration: pc.ram -> VM's ram
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Memory changes for QOMification and automatic tracking of MR lifetime.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=M+/m
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
SCSI changes that enable sending vendor-specific commands via virtio-scsi.
Memory changes for QOMification and automatic tracking of MR lifetime.
# gpg: Signature made Mon 18 Aug 2014 13:03:09 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream:
mtree: remove write-only field
memory: Use canonical path component as the name
memory: Use memory_region_name for name access
memory: constify memory_region_name
exec: Abstract away ref to memory region names
loader: Abstract away ref to memory region names
tpm_tis: remove instance_finalize callback
memory: remove memory_region_destroy
memory: convert memory_region_destroy to object_unparent
ioport: split deletion and destruction
nic: do not destroy memory regions in cleanup functions
vga: do not dynamically allocate chain4_alias
sysbus: remove unused function sysbus_del_io
qom: object: move unparenting to the child property's release callback
qom: object: delete properties before calling instance_finalize
virtio-scsi: implement parse_cdb
scsi-block, scsi-generic: implement parse_cdb
scsi-block: extract scsi_block_is_passthrough
scsi-bus: introduce parse_cdb in SCSIDeviceClass and SCSIBusInfo
scsi-bus: prepare scsi_req_new for introduction of parse_cdb
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Explicitly call object_unparent in the few places where we
will re-create the memory region. If the memory region is
simply being destroyed as part of device teardown, let QOM
handle it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'Overall fuzzer requirements' chapter contains the current product vision and
features done and to be done. This chapter is still in progress.
Signed-off-by: Maria Kustova <maria.k@catit.be>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This document explains how IOThreads and the main loop are related,
especially how to write code that can run in an IOThread. Currently
only virtio-blk-data-plane uses these techniques. The next obvious
target is virtio-scsi; there has also been work on virtio-net.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The current version of the qcow2 specification recommends to save the backing
file name in the end of the first cluster. It follows that the backing file
name can be saved somewhere in the image, but the first cluster, which
contradicts the current QEMU implementation.
The patch makes the backing file name required to be placed after the header
extensions in the first image cluster.
Signed-off-by: Maria Kustova <maria.k@catit.be>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The VSERPORT_CHANGE event was added in e2ae6159. The patch for
this event was prepared at a time when this file was gone, even
though it got applied immediately after dfab4892 restored this
file. Duplicate the documentation into this file, so that
anyone using this file instead of qapi will not miss out on this
new event.
* docs/qmp/qmp-events.txt (VSERPORT_CHANGE): Add.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The POWERDOWN event was first documented in 0aab9ec3. But since
dfab4892 later restored this file to the state prior to qmp events,
and we never documented it in the past, anyone using this file
instead of qapi will miss out on this event. Tweak the existing
wording of SHUTDOWN to match 84321831, and make the difference
between the two events apparent.
* docs/qmp/qmp-events.txt (POWERDOWN): Add.
(SHUTDOWN): Tweak.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The SPICE_MIGRATE_COMPLETED event was first documented in
7cfadb6b. But since dfab4892 later restored this file to the
state prior to qmp events, and we never documented it in the
past, anyone using this file instead of qapi will miss out on
this event.
* docs/qmp/qmp-events.txt (SPICE_MIGRATE_COMPLETED): Add.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
For consistency with the rest of this file, every event should be
listed in isolation. Compare how commit 7cfadb6b split
SPICE_CONNECTED and SPICE_DISCONNECTED into separate qmp events.
* docs/qmp/qmp-events.txt (SPICE_CONNECTED, SPICE_DISCONNECTED):
Split.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
When converting to qmp events, commits 7cfadb6b and a6330785
fixed some grammar as part of moving text between files. But
since dfab4892 later restored this file to the state prior to
qmp events, we have to do it again.
* docs/qmp/qmp-events.txt (RESET, SPICE_INITIALIZED): Tweak.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
In many cases, the call to event_notifier_set in aio_notify is unnecessary.
In particular, if we are executing aio_dispatch, or if aio_poll is not
blocking, we know that we will soon get to the next loop iteration (if
necessary); the thread that hosts the AioContext's event loop does not
need any nudging.
The patch includes a Promela formal model that shows that this really
works and does not need any further complication such as generation
counts. It needs a memory barrier though.
The generation counts are not needed because any change to
ctx->dispatching after the memory barrier is okay for aio_notify.
If it changes from zero to one, it is the right thing to skip
event_notifier_set. If it changes from one to zero, the
event_notifier_set is unnecessary but harmless.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
fe069d9d had aligned code and documentation while dropping the s from the
actual JSON output. Fix that.
This also fix test/qemu-iotest/081 since the missing s was causing a permutation.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Old code was affected by memory gaps which resulted in buffer pointers
pointing to address outside of the mapped regions.
Here we are introducing following changes:
- new function qemu_get_ram_block_host_ptr() returns host pointer
to the ram block, it is needed to calculate offset of specific
region in the host memory
- new field mmap_offset is added to the VhostUserMemoryRegion. It
contains offset where specific region starts in the mapped memory.
As there is stil no wider adoption of vhost-user agreement was made
that we will not bump version number due to this change
- other fileds in VhostUserMemoryRegion struct are not changed, as
they are all needed for usermode app implementation
- region data is not taken from ram_list.blocks anymore, instead we
use region data which is alredy calculated for use in vhost-net
- Now multiple regions can have same FD and user applicaton can call
mmap() multiple times with the same FD but with different offset
(user needs to take care for offset page alignment)
Signed-off-by: Damjan Marion <damarion@cisco.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Damjan Marion <damarion@cisco.com>
The conversion of events to the QAPI, resulted in the removal of the
docs/qmp/qmp-events.txt file. This was done to avoid having duplicated
information between qmp-events.txt and qapi-event.json.
However, qmp-events.txt contains examples and we're still not sure
how to proper install QAPI docs in the host. To avoid harming users,
it's better to re-add qmp-events.txt for now and deal with the
duplication later.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
'monitor.h' is still included in target-s390x/kvm.c, since I have
no good way to verify whether other code need it on my x86 host.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
SPICE_INITIALIZED, SPICE_CONNECTED, SPICE_DISCONNECTED and
SPICE_MIGRATE_COMPLETED are converted in one patch, since they
use some common functions. inet_strfamily() is removed since no
callers exist anymore.
Note that there is no existing doc for SPICE_MIGRATE_COMPLETED
in docs/qmp/qmp-events.txt before this patch.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Since VNC_CONNECTED, VNC_DISCONNECTED, VNC_INITIALIZED share some
common functions, convert them in one patch.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Param name is declared as optional, since in code it is an optional
one.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Since BLOCK_JOB_COMPLETED, BLOCK_JOB_CANCELLED, BLOCK_JOB_READY are
related, convert them in one patch. The block_job_event_* functions
are used to keep encapsulation of BlockJob structure.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
