NCQ commands have the concept of a "TAG" that they need to set,
but in the AHCI world, it is mandated that the TAG always match
the command slot that you executed the NCQ from.
See AHCI 9.3.1.1.5.2 "Native Queued Commands".
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435016308-6150-14-git-send-email-jsnow@redhat.com
NCQ commands will expect the SDBS interrupt,
and in the normative case, do not expect to see
a D2H Register FIS unless something went wrong.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435016308-6150-13-git-send-email-jsnow@redhat.com
The wait command should check to make sure SACT is clear as well
as the Command Issue register.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435016308-6150-12-git-send-email-jsnow@redhat.com
NCQ frames are generated a little differently than
their non-NCQ cousins. Add support for them.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435016308-6150-11-git-send-email-jsnow@redhat.com
NCQ commands should not / do not update the byte count
in the command header post command, so this field is
meaningless for NCQ tests.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435016308-6150-10-git-send-email-jsnow@redhat.com
If you try to execute an NCQ command before trying to engage with the
device by issuing an IDENTIFY command, the error bits that are part of
the signature will fool the test suite into thinking there was a failure.
Issue IDENTIFY first on "boot", which will clear the signature out of
the registers for us.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435016308-6150-9-git-send-email-jsnow@redhat.com
Test that we can survive a couple of cycles of running a basic identify
test, some IO, and resetting the HBA. Ensures that we can bring the HBA
back to compliant spec during the lifecycle of the VM.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1434470575-21625-5-git-send-email-jsnow@redhat.com
There's a handful of trivial bugs in the libqos/ahci functions,
squish them together.
- Zero cached pointers after freeing them
- The Command List Buffer is an array of 32x 32 byte structures, not
32x 8 byte pointers -- it's 1MiB, not 256 bytes. Zero it ALL.
- Free the correct command in ahci_pick_cmd.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1434470575-21625-4-git-send-email-jsnow@redhat.com
Test that the FIS delivered after a nondata command has appropriately
updated registers, just as we'd expect a data command to do.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1434470575-21625-3-git-send-email-jsnow@redhat.com
Only poll the specific type of event we are interested in, to avoid
stealing events that should be consumed by someone else.
Suggested-by: John Snow <jsnow@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This checks that the discard on mirror source that effectively zeroes
data is also reflected by the data of target.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If we wish to make differential backups a feature that's easy to access,
it might be pertinent to rename the "dirty-bitmap" mode to "incremental"
to make it clear what /type/ of backup the dirty-bitmap is helping us
perform.
This is an API breaking change, but 2.4 has not yet gone live,
so we have this flexibility.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1433463642-21840-2-git-send-email-jsnow@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit f006cf7fa9 ("qdev-monitor:
Propagate errors through qdev_device_add()") dropped a meaningless error
message. This change in output caused qemu-iotests 051 to fail:
QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed.
-QEMU_PROG: -device ide-drive,drive=disk: Device 'ide-drive' could not be initialized
Update 051.out so the test passes again.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1435071369-30936-1-git-send-email-stefanha@redhat.com
The function bdrv_clear_dirty_bitmap() is updated to use
faster hbitmap_reset_all() call.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 555E868A.60506@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere.
The only remaining user in qemu-option.c is qemu_opts_parse(). Is it
used in QMP context? If not, we can simply replace
qerror_report_err() by error_report_err().
The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are
clearly not in QMP context.
The uses in vl.c aren't either, because the only QMP command handlers
there are qmp_query_status() and qmp_query_machines(), and they don't
call it.
Remaining uses:
* drive_def(): Command line -drive and such, HMP drive_add and pci_add
* hmp_chardev_add(): HMP chardev-add
* monitor_parse_command(): HMP core
* tmp_config_parse(): Command line -tpmdev
* net_host_device_add(): HMP host_net_add
* net_client_parse(): Command line -net and -netdev
* qemu_global_option(): Command line -global
* vnc_parse_func(): Command line -display, -vnc, default display, HMP
change, QMP change. Bummer.
* qemu_pci_hot_add_nic(): HMP pci_add
* usb_net_init(): Command line -usbdevice, HMP usb_add
Propagate errors through qemu_opts_parse(). Create a convenience
function qemu_opts_parse_noisily() that passes errors to
error_report_err(). Switch all non-QMP users outside tests to it.
That leaves vnc_parse_func(). Propagate errors through it. Since I'm
touching it anyway, rename it to vnc_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Now that qbool is fixed, let's fix getting and setting a bool
value to a qdict member to also use C99 bool rather than int.
I audited all callers to ensure that the changed return type
will not cause any changed semantics.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We require a C99 compiler, so let's use 'bool' instead of 'int'
when dealing with boolean values. There are few enough clients
to fix them all in one pass.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
* Changes to name string ownership for alias properties
* Improvements around enum properties
* Cleanups around -object handling
* New helper functions
* Cleanups of qdev init helper functions
* Add path argument to qom-tree script
* QTest cleanup to use new qtest_add_data_func() consistently
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=bIg2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging
QOM infrastructure fixes and device conversions
* Changes to name string ownership for alias properties
* Improvements around enum properties
* Cleanups around -object handling
* New helper functions
* Cleanups of qdev init helper functions
* Add path argument to qom-tree script
* QTest cleanup to use new qtest_add_data_func() consistently
# gpg: Signature made Fri Jun 19 18:14:38 2015 BST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-devices-for-peter:
qdev: Un-deprecate qdev_init_nofail()
qdev: Deprecated qdev_init() is finally unused, drop
qom: Don't pass string table to object_get_enum() function
qom: Add an object_property_add_enum() helper function
qom: Make enum string tables const-correct
qom: Add object_new_with_props() / object_new_withpropv() helpers
qom: Add helper function for getting user objects root
vl: Create (most) objects before creating chardev backends
doc: Document user creatable object types in help text
backends: Fix typename of 'policy' enum property in hostmem obj
scripts: Add support for path as argument of qom-tree
tests: Use qtest_add_data_func() consistently
qdev: Free property names after registering gpio aliases
qom: strdup() target property name on object_property_add_alias()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Avoid long 100% CPU wait after restarting guests that use the periodic timer
* Fixes for access clamping (WinXP, MIPS)
* wixl/.msi support for qemu-ga on Windows
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVg+9dAAoJEL/70l94x66Df/MH/jWRacMKQAGJwmlXS4NsTCdh
HF85290kWn+P9NH1e7TBnhPrgBdDTJmxK3fAMHKZwXs3vDs2lC1eBJyoGZw7lVxQ
uihlnQjSSaRd5R6IpXNgr0wFrS8T3pN+FzOkStYqEHYINa1uBa6CBXYzOzGTFgd+
OOrU0O15NAVsxU29jBW4HPqX4S0zT4KbpvIESGWPgGbLyBhgLAuMLlvbWwNkFZt0
3bDtel9QQnL0Sm4wl7IWCqePEIkCkbF4tRIwCn34Bq/SuE0RgESiHGKUJ638oSuj
/ga1StztyHZhnk+SSAcnma//Holauh+2nBm+8sGyyFFeUbEJsPG70ODCrfxbQf0=
=AXLV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* i8254 security fix
* Avoid long 100% CPU wait after restarting guests that use the periodic timer
* Fixes for access clamping (WinXP, MIPS)
* wixl/.msi support for qemu-ga on Windows
# gpg: Signature made Fri Jun 19 11:30:53 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
exec: clamp accesses against the MemoryRegionSection
exec: do not clamp accesses to MMIO regions
mc146818rtc: Reset the periodic timer on load
qemu-timer: Call clock reset notifiers on forward jumps
tests: virtio-scsi: Add test for unaligned WRITE SAME
tests: virtio-scsi: Move start/stop to individual test functions
libqos: Complete virtio device ID definition list
libqos: Allow calling guest_free on NULL pointer
tests: Link libqos virtio object to virtio-scsi-test
i8254: fix out-of-bounds memory access in pit_ioport_read()
qemu-ga: Building Windows MSI installation with configure/Makefile
qemu-ga: Introduce Windows MSI script
qemu-ga: debug printouts to help troubleshoot installation
qemu-ga: adding vss-[un]install options
qemu-log: Open file for logging when specified
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that properties can be explicitly registered as an enum
type, there is no need to pass the string table to the
object_get_enum() function. The object property registration
already has a pointer to the string table.
In changing this method signature, the hostmem backend object
has to be converted to use the new enum property registration
code, which simplifies it somewhat.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
A QOM property can be parsed as enum using the visit_type_enum()
helper function, but this forces callers to use the more complex
generic object_property_add() method when registering it. It
also requires that users of that object have access to the
string map when they want to read the property value.
This patch introduces a specialized object_property_add_enum()
method which simplifies the use of enum properties, so the
setters/getters directly get passed the int value.
typedef enum {
MYDEV_TYPE_FROG,
MYDEV_TYPE_ALLIGATOR,
MYDEV_TYPE_PLATYPUS,
MYDEV_TYPE_LAST
} MyDevType;
Then provide a table of enum <-> string mappings
static const char *const mydevtypemap[MYDEV_TYPE_LAST + 1] = {
[MYDEV_TYPE_FROG] = "frog",
[MYDEV_TYPE_ALLIGATOR] = "alligator",
[MYDEV_TYPE_PLATYPUS] = "platypus",
[MYDEV_TYPE_LAST] = NULL,
};
Assuming an object struct of
typedef struct {
Object parent_obj;
MyDevType devtype;
...other fields...
} MyDev;
The property can then be registered as follows:
static int mydev_prop_get_devtype(Object *obj,
Error **errp G_GNUC_UNUSED)
{
MyDev *dev = MYDEV(obj);
return dev->devtype;
}
static void mydev_prop_set_devtype(Object *obj,
int value,
Error **errp G_GNUC_UNUSED)
{
MyDev *dev = MYDEV(obj);
dev->devtype = value;
}
object_property_add_enum(obj, "devtype",
mydevtypemap, "MyDevType",
mydev_prop_get_devtype,
mydev_prop_set_devtype,
NULL);
Note there is no need to check the range of 'value' in
the setter, because the string->enum conversion code will
have already done that and reported an error as required.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It is reasonably common to want to create an object, set a
number of properties, register it in the hierarchy and then
mark it as complete (if a user creatable type). This requires
quite a lot of error prone, verbose, boilerplate code to achieve.
First a pair of functions object_set_props() / object_set_propv()
are added which allow for a list of objects to be set in
one single API call.
Then object_new_with_props() / object_new_with_propv() constructors
are added which simplify the sequence of calls to create an
object, populate properties, register in the object composition
tree and mark the object complete, into a single method call.
Usage would be:
Error *err = NULL;
Object *obj;
obj = object_new_with_propv(TYPE_MEMORY_BACKEND_FILE,
object_get_objects_root(),
"hostmem0",
&err,
"share", "yes",
"mem-path", "/dev/shm/somefile",
"prealloc", "yes",
"size", "1048576",
NULL);
Note all property values are passed in string form and will
be parsed into their required data types, using normal QOM
semantics for parsing from string format.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This is an exercise for virtio-scsi tests using the libqos virtio
library. A few common routines are added to facilitate future extensions
of the test set.
The added test case is a regression test for the bug in d7f4b1999e.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace uses of g_test_add_data_func() for QTest test cases.
It is still valid to use it for any non-QTest test cases,
which are not run for multiple target binaries.
Suggested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
We print the name as it appears in the include expression. Tools
processing error messages want it relative to the working directory.
Make it so.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=QgYk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer core and image format patches
# gpg: Signature made Fri Jun 12 16:08:53 2015 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (25 commits)
block: Fix reopen flag inheritance
block: Add BlockDriverState.inherits_from
block: Add list of children to BlockDriverState
queue.h: Add QLIST_FIX_HEAD_PTR()
block: Drain requests before swapping nodes in bdrv_swap()
block: Move flag inheritance to bdrv_open_inherit()
block: Use QemuOpts in bdrv_open_common()
block: Use macro for cache option names
vmdk: Use bdrv_open_image()
quorum: Use bdrv_open_image()
check-qdict: Test cases for new functions
qdict: Add qdict_{set,copy}_default()
qdict: Add qdict_array_entries()
iotests: Add tests for overriding BDRV_O_PROTOCOL
block: driver should override flags in bdrv_open()
block: Change bitmap truncate conditional to assertion
block: record new size in bdrv_dirty_bitmap_truncate
raw-posix: Fix .bdrv_co_get_block_status() for unaligned image size
vmdk: Use vmdk_find_index_in_cluster everywhere
vmdk: Fix index_in_cluster calculation in vmdk_co_get_block_status
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJVevNrAAoJEJykq7OBq3PIn3wH/iTkoxK+8c6vHY4gAyW/3Vel
JAWyDULliLg/mJiyDyz+9hbyb3FmDsQ7Gve5laFCqSES8IChe/fAoR2dXAapHbJm
VroBii+C4MIakAjB1eSGVTMeJVgyq0SxCbEgo6MSgCNRg8pH/ne4kGMn0elsyMQm
VrxqsoW1qda0gLbybu7uRKmdZlb5Eklk0zQmBlzd25j3xgMXmo7ZcXW0d7dCi/xd
ot01aPNHWKy2FyYsI+N1SMagCedjn0FFCHMMc08W34olUOAschV+Croxi6gupbTl
RdlYNnB6BBYLgT7mxYuKKd20r4Q8Si3E5YjIsYaXIskbCOxDuryKboyheMXWqdA=
=mx5x
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
# gpg: Signature made Fri Jun 12 15:57:47 2015 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request:
qemu-iotests: expand test 093 to support group throttling
throttle: Update throttle infrastructure copyright
throttle: add the name of the ThrottleGroup to BlockDeviceInfo
throttle: acquire the ThrottleGroup lock in bdrv_swap()
throttle: Add throttle group support
throttle: Add throttle group infrastructure tests
throttle: Add throttle group infrastructure
throttle: Extract timers from ThrottleState into a separate structure
raw-posix: Fix .bdrv_co_get_block_status() for unaligned image size
Revert "iothread: release iothread around aio_poll"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds test cases for the following new QDict functions:
* qdict_array_entries()
* qdict_set_default_str()
* qdict_copy_default()
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJVetcwAAoJEJykq7OBq3PI+84IAMfkE0uCXdUbp3jZP9iVx68y
ZtHbhpnZle3bmVFBkgsF8vHWsMlxMZzr2PpAl02VXrrE6z0ScTz+GmVU2V89Y5nv
kn9DhAR4gcyKbKKgRtwjCLMoCfxsdaHTOJXfcHhsiqQP4PwdFkV6bQAymwcJegY/
ze5wKX8XqIML6yUCnhrN41pjt6NkIQoyRneLwX5ymeRLfWg23i9YOVU4Njmm9X52
kH7Xg0UuT6HTyyNER7iqwh61gQ33ETkfWd9UrHFGi7q70UJAr+cVXtzJjqnh08OU
BExph/lQfxXuivpiThvjZkPvMVqISyCrsIAXrwjhXnjqwz/3nt3i6zrfvPNNPG0=
=VdKf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into staging
# gpg: Signature made Fri Jun 12 13:57:20 2015 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/net-pull-request:
qmp/hmp: add rocker device support
rocker: bring link up/down on PHY enable/disable
rocker: update tests using hw-derived interface names
rocker: Add support for phys name
iohandler: Change return type of qemu_set_fd_handler to "void"
event-notifier: Always return 0 for posix implementation
xen_backend: Remove unused error handling of qemu_set_fd_handler
oss: Remove unused error handling of qemu_set_fd_handler
alsaaudio: Remove unused error handling of qemu_set_fd_handler
main-loop: Drop qemu_set_fd_handler2
Change qemu_set_fd_handler2(..., NULL, ...) to qemu_set_fd_handler
tap: Drop tap_can_send
net/socket: Drop net_socket_can_send
netmap: Drop netmap_can_send
l2tpv3: Drop l2tpv3_can_send
stubs: Add qemu_set_fd_handler
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds tests for overriding the qemu-internal BDRV_O_PROTOCOL flag by
explicitly specifying a block driver. As one test must be run over the
NBD protocol while the other must not, this patch adds two separate
iotests.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The BDRV_O_PROTOCOL flag should have an impact only if no driver is
specified explicitly. Therefore, if bdrv_open() is called with an
explicit block driver argument (either through the options QDict or
through the drv parameter) and that block driver is a protocol block
driver, BDRV_O_PROTOCOL should be set; if it is a format block driver,
BDRV_O_PROTOCOL should be unset.
While there was code to unset the flag in case a format block driver
has been selected, it only followed the bdrv_fill_options() function
call whereas the flag in fact needs to be adjusted before it is used
there.
With that change, BDRV_O_PROTOCOL will always be set if the BDS should
be a protocol driver; if the driver has been specified explicitly, the
new code will set it; and bdrv_fill_options() will only "probe" a
protocol driver if BDRV_O_PROTOCOL is set. The probing after
bdrv_fill_options() cannot select a protocol driver.
Thus, bdrv_open_image() to open BDS.file is never called if a protocol
BDS is about to be created. With that change in turn it is impossible to
call bdrv_open_common() with a protocol drv and file != NULL, which
allows us to remove the bdrv_swap() call.
This change breaks a test case in qemu-iotest 051:
"-drive file=t.qcow2,file.driver=qcow2" now works because the explicitly
specified "qcow2" overrides the BDRV_O_PROTOCOL which is automatically
set for the "file" BDS (and the filename is just passed down).
Therefore, this patch removes that test case.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a test case to test 103 for performing a COW operation in a
qcow2 image using an L2 cache with minimal size (which should be at
least two clusters so the COW can access both source and destination
simultaneously).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If passwordless "sudo" works, use it in the qemu-io cmd.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
RHEL6 doesn't have Python 2.7, so replace this call with
assertNotEqual(x, None) which will work just as well.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch improves the test by attaching a different number of drives
to the VM and putting them in the same throttling group. The test
verifies that the I/O is evenly distributed among all members of the
group, and that the limits are enforced.
By default the test is repeated 3 times with 1, 2 and 3 drives, but
the maximum number of simultaneous drives is configurable.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 513df1da5c658878191b579ebcddd985adcd4122.1433779731.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Group throttling will share ThrottleState between multiple bs.
As a consequence the ThrottleState will be accessed by multiple aio
context.
Timers are tied to their aio context so they must go out of the
ThrottleState structure.
This commit paves the way for each bs of a common ThrottleState to
have its own timer.
Signed-off-by: Benoit Canet <benoit.canet@nodalink.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 6cf9ea96d8b32ae2f8769cead38f68a6a0c8c909.1433779731.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This reverts commit a0710f7995.
In qemu-devel email message <556DBF87.2020908@de.ibm.com>, Christian
Borntraeger writes:
Having many guests all with a kernel/ramdisk (via -kernel) and
several null block devices will result in hangs. All hanging
guests are in partition detection code waiting for an I/O to return
so very early maybe even the first I/O.
Reverting that commit "fixes" the hangs.
Reverting this commit for the 2.4 release. More time is needed to
investigate and correct this patch.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With previous patch to support phy name attribute for each port, the OS
can name port interfaces using the hw-derived name. So update rocker
tests to use the new hw-derived interface names.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1433985681-56138-3-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Remove now useless device models from other MIPS configurations
We're now compiling 12 files less than before.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
It has been reported that sometimes the .rodata section of SeaBIOS,
containing the constant string against which the SMBIOS signature
ends up being compared, also falls within the guest f-segment. In
that case, the test obviously fails, unless we continue searching
for the *real* SMBIOS entry point.
Rather than stopping at the first match for the SMBIOS signature
("_SM_") in the f-segment (0xF0000-0xFFFFF), continue scanning
until either a valid entry point table is found, or the f-segment
has been exhausted.
Reported-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* CONFIG_PARALLEL fix from Mirek
* Atomic/optimized dirty bitmap access from myself and Stefan
* BUILD_DIR convenience/bugfix from Peter C
* Memory leak fix from Shannon
* SMM improvements (though still TCG only) from myself and Gerd, acked by mst
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVceAwAAoJEL/70l94x66Dyz4H/RHS/OUGo6HOwG1FZ4l8RxRl
FY+pwJqinxFyGySmMLVHEeQCsIfxgi8bOmuWblG7sdt245nhMIj2jglyEOCUA3RN
Q9qxQr6QyXBWiwK4bfB7xI1z3/mc8cVvuxjtkLaBMa16A4MXMunWCDcyhsX9/0Vw
VySgTgBbn5AyY5x58TbkB7Tl6hMZgxF0yNwU6IGQvP079dgREAL2tzR1Wk8kPC80
ltLWlrwTAzF2km5m6rmstpMeZ/XIaq3DD2LU03SyUhefMsYowGKK+7Boo4lHpVm9
XAlxflahN7VGtQuno5RpYNNSzGqSJgqu5X5JxCMnbWdPi4sX3bijQdcUhW3/0oo=
=KPIz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* KVM error improvement from Laurent
* CONFIG_PARALLEL fix from Mirek
* Atomic/optimized dirty bitmap access from myself and Stefan
* BUILD_DIR convenience/bugfix from Peter C
* Memory leak fix from Shannon
* SMM improvements (though still TCG only) from myself and Gerd, acked by mst
# gpg: Signature made Fri Jun 5 18:45:20 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (62 commits)
update Linux headers from kvm/next
atomics: add explicit compiler fence in __atomic memory barriers
ich9: implement SMI_LOCK
q35: implement TSEG
q35: add test for SMRAM.D_LCK
q35: implement SMRAM.D_LCK
q35: add config space wmask for SMRAM and ESMRAMC
q35: fix ESMRAMC default
q35: implement high SMRAM
hw/i386: remove smram_update
target-i386: use memory API to implement SMRAM
hw/i386: add a separate region that tracks the SMRAME bit
target-i386: create a separate AddressSpace for each CPU
vl: run "late" notifiers immediately
qom: add object_property_add_const_link
vl: allow full-blown QemuOpts syntax for -global
pflash_cfi01: add secure property
pflash_cfi01: change to new-style MMIO accessors
pflash_cfi01: change big-endian property to BIT type
target-i386: wake up processors that receive an SMI
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[Fix compilation of the newly introduced test. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This just adds a few additional checks of the MSR and interrupt pin to
the already existing test cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1432214378-31891-9-git-send-email-kwolf@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Instead of converting each byte one-at-a-time and then sending each byte
over the wire, use sprintf() to pre-compute all of the hex nibs into a
single buffer, then send the entire buffer all at once.
This gives a moderate speed boost to memread() and memwrite() functions.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1431021095-7558-2-git-send-email-jsnow@redhat.com
Where it makes sense, use the new faster primitives.
For generally small reads/writes such as for the PRDT
and FIS packets, stick with the more wasteful but
easier to debug memread/memwrite.
For ahci-test (before migration tests):
With this patch:
real 0m3.675s
user 0m2.582s
sys 0m1.718s
Without any qtest protocol improvements:
real 0m14.171s
user 0m12.072s
sys 0m12.527s
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1430864578-22072-6-git-send-email-jsnow@redhat.com
Previously, memset was just a frontend to write() and only
stupidly sent the pattern many times across the wire.
Let's not discuss who stupidly wrote it like that in the first place.
(Hint: It was me.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1430864578-22072-4-git-send-email-jsnow@redhat.com
For larger pieces of data that won't need to be debugged and
viewing the hex nibbles is unlikely to be useful, we can encode
data using base64 instead of encoding each byte as %02x, which
leads to some space savings and faster reads/writes.
For now, the default is left as hex nibbles in memwrite() and memread().
For the purposes of making qtest io easier to read and debug, some
callers may want to specify using the old encoding format for small
patches of data where the savings from base64 wouldn't be that profound.
memwrite/memread use a data encoding that takes 2x the size of the original
buffer, but base64 uses "only" (4/3)x, so for larger buffers we can save a
decent amount of time and space.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1430864578-22072-3-git-send-email-jsnow@redhat.com
Test migrating a halted DMA transaction.
Resume, then test data integrity.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1430417242-11859-10-git-send-email-jsnow@redhat.com
If we're going to test the migration of halted DMA jobs,
we should probably check to make sure we can resume them
locally as a first step.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1430417242-11859-9-git-send-email-jsnow@redhat.com
Use blkdebug to inject an error on first flush, then attempt to flush
on the first guest. When the error halts the VM, migrate to the
second VM, and attempt to resume the command.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1430417242-11859-8-git-send-email-jsnow@redhat.com
Write to one guest, migrate, and then read from the other.
adjust ahci_io to clear any buffers it creates, so that we
can use ahci_io safely on both guests knowing we are using
empty buffers and not accidentally re-using data.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1430417242-11859-7-git-send-email-jsnow@redhat.com
Notes:
* The migration is performed on QOSState objects.
* The migration is performed in such a way that it does not assume
consistency between the allocators attached to each. That is to say,
you can use each QOSState object completely independently and then at
an arbitrary point decide to migrate, and the destination object will
now be consistent with the memory within the source guest. The source
object that was migrated from will have a completely blank allocator.
ahci-test.c:
- verify_state is added
- ahci_migrate is added as a frontend to migrate
- test_migrate_sanity test case is added.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1430417242-11859-6-git-send-email-jsnow@redhat.com
libqos.c:
-set_context for addressing which commands go where
-migrate performs the actual migration
malloc.c:
- Structure of the allocator is adjusted slightly with
a second-tier malloc to make swapping around the allocators
easy when we "migrate" the lists from the source to the destination.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1430417242-11859-4-git-send-email-jsnow@redhat.com
|| probably does not mean the same thing as |.
Additionally, allow users to submit a prd_size of 0
to indicate that they'd like to continue using the default.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1430417242-11859-3-git-send-email-jsnow@redhat.com
Sometimes we want a command to halt the VM instead
of complete successfully, so it'd be nice to let the
libqos/ahci functions cope with such scenarios.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1430417242-11859-2-git-send-email-jsnow@redhat.com
Add a simple test case for qemu-iotests that covers read/write
with encrypted qcow2 files.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Adding "-d" option. The output goes to "tee" so it appears in your
console. Also, raise the verbosity of unnitest runner.
When testing a topic branch, it's possible that a bug introduced by a
code change makes the python test case hang, with debug output, it is
much easier to locate the problem.
This can also be helpful if you want to watch the progress of a python
test, it offers you a way to sense the speed of each test case method
you're writing.
Note: because there is no easy way to get *both* the verbose output and
the output expected by ./check comparison, the case would always fail
with an "output mismatch". The sole purpose of using this option is
giving developers a quick way to debug when things go wrong.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The image is contributed by Richard W.M. Jones.
Cc: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test zero write in byte range 512~1024 for 4k alignment.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1431522721-3266-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-22-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-13-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id: 1430207220-24458-11-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
suggested by Jeff Cody
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1430207220-24458-2-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Mandatory option is silly, and the error handling is missing: the
programs crash when -i isn't supplied. Make it an argument, and check
it properly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Enhance the testsuite to cover downstream events and commands.
Events worked without more tweaks, but commands needed a few final
updates in the generator to mangle names in the appropriate places.
In making those tweaks, it was easier to drop type_visitor() and
inline its actions instead.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Enhance the testsuite to cover downstream alternates, including
whether the branch name or type is downstream. Update the
generator to mangle alternate names in the appropriate places.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Enhance the testsuite to cover downstream flat unions, including
the base type, discriminator name and type, and branch name and
type. Update the generator to mangle the union names in the
appropriate places.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Enhance the testsuite to cover downstream simple unions, including
when a union branch is a downstream name. Update the generator to
mangle the union names in the appropriate places.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Enhance the testsuite to cover downstream structs, including struct
members and base structs. Update the generator to mangle the
struct names in the appropriate places.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Enhance the testsuite to cover a downstream enum type and enum
string. Update the generator to mangle the enum name in the
appropriate places.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Memory hot-unplug support for pc, MSI-X
mapping update speedup for virtio-pci,
misc refactorings and bugfixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVUFj/AAoJECgfDbjSjVRpteQH+gKoOMKilM6qvgdQS9vduFJ+
lDHNnmfgzWjVMEetiUOc9hImfEEyTyDFrkSI3wf4a8RZ7UnnDKD8hZR1nToySJPd
SuDP/EdtXYtInIMjc1MUUrJEP6qtjjgM+IbikVzHDxCeekrTMFz2w05MZ+V+hxI5
8b8ndPNfjX3ciIRjHKZ2u6hKEemhzxr1yyKTnJVGDN07hmfMbCyLsiWnFfShZwfv
g7USgiXjFfpvU5Q7QWpiCapfAaEpevRqieGzRjSbPy5Frm3XT7v+hWbFnvIJqUPj
5/SMV8I4qtKQe15Qah292HB//oaFM/AvRtHWvQkre3YIqFwyCYimQtjqoRCYC1E=
=x0ub
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, virtio enhancements
Memory hot-unplug support for pc, MSI-X
mapping update speedup for virtio-pci,
misc refactorings and bugfixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon May 11 08:23:43 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (28 commits)
acpi: update expected files for memory unplug
virtio-scsi: Move DEFINE_VIRTIO_SCSI_FEATURES to virtio-scsi
virtio-net: Move DEFINE_VIRTIO_NET_FEATURES to virtio-net
pci: Merge pci_nic_init() into pci_nic_init_nofail()
acpi: add a missing backslash to the \_SB scope.
qmp-event: add event notification for memory hot unplug error
acpi: add hardware implementation for memory hot unplug
acpi: fix "Memory device control fields" register
acpi: extend aml_field() to support UpdateRule
acpi, mem-hotplug: add unplug cb for memory device
acpi, mem-hotplug: add unplug request cb for memory device
acpi, mem-hotplug: add acpi_memory_slot_status() to get MemStatus
docs: update documentation for memory hot unplug
virtio: coding style tweak
pci: remove hard-coded bar size in msix_init_exclusive_bar()
virtio-pci: speedup MSI-X masking and unmasking
virtio: introduce vector to virtqueues mapping
virtio-ccw: using VIRTIO_NO_VECTOR instead of 0 for invalid virtqueue
monitor: check return value of qemu_find_net_clients_except()
monitor: replace the magic number 255 with MAX_QUEUE_NUM
...
Conflicts:
hw/s390x/s390-virtio-bus.c
[PMM: fixed conflict in s390_virtio_scsi_properties and
s390_virtio_net_properties arrays; since the result of the
two conflicting patches is to empty the property arrays
completely, the conflict resolution is to remove them entirely.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add some basic test for rocker to test L2/L3/L4 functionality. Requires an
external test environment, simp, located here:
https://github.com/scottfeldman/simp
To run tests, simp environment must be installed and a suitable VM image built
and installed with a Linux 3.18 (or greater) kernel with rocker driver support
enabled.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Message-id: 1426306173-24884-8-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We document that in QMP, the client may send any json-value
for the optional "id" key, and then return that same value
on reply (both success and failures, insofar as the failure
happened after parsing the id). [Note that the output may
not be identical to the input, as whitespace may change and
since we may reorder keys within a json-object, but that this
still constitutes the same json-value]. However, we were not
handling the JSON literal null, which counts as a json-value
per RFC 7159.
Also, down the road, given the QAPI schema of {'*foo':'str'} or
{'*foo':'ComplexType'}, we could decide to allow the QMP client
to pass { "foo":null } instead of the current representation of
{ } where omitting the key is the only way to get at the default
NULL value. Such a change might be useful for argument
introspection (if a type in older qemu lacks 'foo' altogether,
then an explicit "foo":null probe will force an easily
distinguished error message for whether the optional "foo" key
is even understood in newer qemu). And if we add default values
to optional arguments, allowing an explicit null would be
required for getting a NULL value associated with an optional
string that has a non-null default. But all that can come at a
later day.
The 'check-unit' testsuite is enhanced to test that parsing
produces the same object as explicitly requesting a reference
to the special qnull object. In addition, I tested with:
$ ./x86_64-softmmu/qemu-system-x86_64 -qmp stdio -nodefaults
{"QMP": {"version": {"qemu": {"micro": 91, "minor": 2, "major": 2}, "package": ""}, "capabilities": []}}
{"execute":"qmp_capabilities","id":null}
{"return": {}, "id": null}
{"id":{"a":null,"b":[1,null]},"execute":"quit"}
{"return": {}, "id": {"a": null, "b": [1, null]}}
{"timestamp": {"seconds": 1427742379, "microseconds": 423128}, "event": "SHUTDOWN"}
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
commit c06b2ffb02
acpi: add hardware implementation for memory hot unplug
Changed both the DSDT and the SSDT. Update the expected files
accordingly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Our type inheritance for both 'struct' and for flat 'union' merges
key/value pairs from the base class with those from the type in
question. Although the C code currently boxes things so that there
is a distinction between which member is referred to, the QMP wire
format does not allow passing a key more than once in a single
object. Besides, if we ever change the generated C code to not be
quite so boxy, we'd want to avoid duplicate member names there,
too.
Fix a testsuite entry added in an earlier patch, as well as adding
a couple more tests to ensure we have appropriate coverage. Ensure
that collisions are detected, regardless of whether there is a
difference in opinion on whether the member name is optional.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The handling of \ inside QAPI strings was less than ideal, and
really only worked JSON's \/, \\, \", and our extension of \'
(an obvious extension, when you realize we use '' instead of ""
for strings). For other things, like '\n', it resulted in a
literal 'n' instead of a newline.
Of course, at the moment, we really have no use for escaped
characters, as QAPI has to map to C identifiers, and we currently
support ASCII only for that. But down the road, we may add
support for default values for string parameters to a command
or struct; if that happens, it would be nice to correctly support
all JSON escape sequences, such as \n or \uXXXX. This gets us
closer, by supporting Unicode escapes in the ASCII range.
Since JSON does not require \OCTAL or \xXX escapes, and our QMP
implementation does not understand them either, I intentionally
reject it here, but it would be an easy addition if we desired it.
Likewise, intentionally refusing the NUL byte means we don't have
to worry about C strings being shorter than the qapi input.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A future patch will be using a 'name':{dictionary} entry in the
QAPI schema to specify a default value for an optional argument
(see previous commit messages for more details why); but existing
use of inline nested structs conflicts with that goal. Now that
all commands have been changed to avoid inline nested structs,
nuke support for them, and turn it into a hard error. Update the
testsuite to reflect tighter parsing rules.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A future patch will be using a 'name':{dictionary} entry in the
QAPI schema to specify a default value for an optional argument;
but existing use of inline nested structs conflicts with that goal.
More precisely, a definition in the QAPI schema associates a name
with a set of properties:
Example 1: { 'struct': 'Foo', 'data': { MEMBERS... } }
associates the global name 'Foo' with properties (meta-type struct)
and MEMBERS...
Example 2: 'mumble': TYPE
within MEMBERS... above associates 'mumble' with properties (type
TYPE) and (optional false) within type Foo
The syntax of example 1 is extensible; if we need another property,
we add another name/value pair to the dictionary (such as
'base':TYPE). The syntax of example 2 is not extensible, because
the right hand side can only be a type.
We have used name encoding to add a property: "'*mumble': 'int'"
associates 'mumble' with (type int) and (optional true). Nice,
but doesn't scale. So the solution is to change our existing uses
to be syntactic sugar to an extensible form:
NAME: TYPE --> NAME: { 'type': TYPE, 'optional': false }
*ONAME: TYPE --> ONAME: { 'type': TYPE, 'optional': true }
This patch fixes the testsuite to avoid inline nested types, by
breaking the nesting into explicit types; it means that the type
is now boxed instead of unboxed in C code, but makes no difference
on the wire (and if desired, a later patch could change the
generator to not do so much boxing in C). When touching code to
add new allocations, also convert existing allocations to
consistently prefer typesafe g_new0 over g_malloc0 when a type
name is involved.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
In the testsuite, UserDefTwo and UserDefNested were identical
structs other than the member names. Reduce code duplication by
having just one type, and choose names that also favor reuse.
This will also make it easier for a later patch to get rid of
inline nested types in QAPI. When touching code related to
allocations, convert g_malloc0(sizeof(Type)) to the more typesafe
g_new0(Type, 1).
Ensure that 'make check-qapi-schema check-unit' still passes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Referring to "type" as both a meta-type (built-in, enum, union,
alternate, or struct) and a specific type (the name that the
schema uses for declaring structs) is confusing. Do the bulk of
the conversion to "struct" in qapi schema, with a fairly
mechanical:
for f in `find -name '*.json'; do sed -i "s/'type'/'struct'/"; done
followed by manually filtering out the places where we have a
'type' embedded in 'data'. Then tweak a couple of tests whose
output changes slightly due to longer lines.
I also verified that the generated files for QMP and QGA (such
as qmp-commands.h) are the same before and after, as assurance
that I didn't leave in any accidental member name changes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Referring to "type" as both a meta-type (built-in, enum, union,
alternate, or struct) and a specific type (the name that the
schema uses for declaring structs) is confusing. The confusion
is only made worse by the fact that the generator mostly already
refers to struct even when dealing with expr['type']. This
commit changes the generator to consistently refer to it as
struct everywhere, plus a single back-compat tweak that allows
accepting the existing .json files as-is, so that the meat of
this change is separate from the mindless churn of that change.
Fix the testsuite fallout for error messages that change, and
in some cases, become more legible. Improve comments to better
match our intentions where a struct (rather than any complex
type) is required. Note that in some cases, an error message
now refers to 'struct' while the schema still refers to 'type';
that will be cleaned up in the later commit to the schema.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have a way to validate every type, we can also be
stricter about enforcing that callers that want to bypass
type safety in generated code. Prior to this patch, it didn't
matter what value was associated with the key 'gen', but it
looked odd that 'gen':'yes' could result in bypassing the
generated code. These changes also enforce the changes made
earlier in the series for documentation and consolidation of
using '**' as the wildcard type, as well as 'gen':false as the
canonical spelling for requesting type bypass.
Note that 'gen':false is a one-way switch away from the default;
we do not support 'gen':true (similar for 'success-response').
In practice, this doesn't matter.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
...or an array of dictionaries. Although we have to cater to
existing commands, returning a non-dictionary means the command
is not extensible (no new name/value pairs can be added if more
information must be returned in parallel). By making the
whitelist explicit, any new command that falls foul of this
practice will have to be self-documenting, which will encourage
developers to either justify the action or rework the design to
use a dictionary after all.
It's a little bit sloppy that we share a single whitelist among
three clients (it's too permissive for each). If this is a
problem, a future patch could tighten things by having the
generator take the whitelist as an argument (as in
scripts/qapi-commands.py --legacy-returns=...), or by having
the generator output C code that requires explicit use of the
whitelist (as in:
#ifndef FROBNICATE_LEGACY_RETURN_OK
# error Command 'frobnicate' should return a dictionary
#endif
then having the callers define appropriate macros). But until
we need such fine-grained separation (if ever), this patch does
the job just fine.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Previous commits demonstrated that the generator overlooked various
bad naming situations:
- types, commands, and events need a valid name
- enum members must be valid names, when combined with prefix
- union and alternate branches cannot be marked optional
Valid upstream names match [a-zA-Z][a-zA-Z0-9_-]*; valid downstream
names match __[a-zA-Z][a-zA-Z0-9._-]*. Enumerations match the
weaker [a-zA-Z0-9._-]+ (in part thanks to QKeyCode picking an enum
that starts with a digit, which we can't change now due to
backwards compatibility). Rather than call out three separate
regex, this patch just uses a broader combination that allows both
upstream and downstream names, as well as a small hack that
realizes that any enum name is merely a suffix to an already valid
name prefix (that is, any enum name is valid if prepending _ fits
the normal rules).
We could reject new enumeration names beginning with a digit by
whitelisting existing exceptions. We could also be stricter
about the distinction between upstream names (no leading
underscore, no use of dot) and downstream (mandatory leading
double underscore), but it is probably not worth the bother.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we know every expression is valid with regards to
its keys, we can add further tests that those keys refer to
valid types. With this patch, all uses of a type (the 'data':
of command, type, union, alternate, and event; the 'returns':
of command; the 'base': of type and union) must resolve to an
appropriate subset of metatypes declared by the current qapi
parse; this includes recursing into each member of a data
dictionary. Dealing with '**' and nested anonymous structs
will be done in later patches.
Update the testsuite to match improved output.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Demonstrate that the qapi generator silently parses confusing
types, which may cause other errors later on. Later patches
will update the expected results as the generator is made stricter.
Most of the new tests focus on blatant errors. But
returns-whitelist is a case where we have historically allowed
returning something other than a JSON object from particular
commands; we have to keep that behavior to avoid breaking clients,
but it would be nicer to avoid adding such commands in the future,
because any return that is not an (array of) object cannot be
easily extended if future qemu wants to return additional
information. The QMP protocol already documents that clients
should ignore unknown dictionary keys, but does not require
clients to have to handle more than one type of JSON object.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
For a few QMP commands, we are forced to pass an arbitrary type
without tracking it properly in QAPI. Among the existing clients,
this unnamed type was spelled 'dict', 'visitor', and '**'; this
patch standardizes on '**', matching the documentation changes
earlier in the series.
Meanwhile, for the 'gen' key, we have been ignoring the value,
although the schema consistently used "'no'" ('success-response'
was hard-coded to checking for 'no'). But now that we can support
a literal "false" in the schema, we might as well use that rather
than ignoring the value or special-casing a random string. Note
that these are one-way switches (use of 'gen':true is not the same
as omitting 'gen'). Also, the use of '**' requires 'gen':false,
but the use of 'gen':false does not mandate the use of '**'.
There is no difference to the generated code. Add some tests on
what we'd like to guarantee, although it will take later patches
to clean up test results and actually enforce the use of a bool
parameter.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
