The call to xgetbv() is passing the ecx value for cpuid function 0xD,
index 0. The xgetbv call thus returns false (OSXSAVE is bit 27, which is
well out of the range of CPUID[0xD,0].ECX) and eax is not modified. While
fixing it, cache the whole computation of supported XCR0 bits since it
will be used for more than just CPUID leaf 0xD.
Furthermore, unsupported subleafs of CPUID 0xD (including all those
corresponding to zero bits in host's XCR0) must be hidden; if OSXSAVE
is not set at all, the whole of CPUID leaf 0xD plus the XSAVE bit must
be hidden.
Finally, unconditionally drop XSTATE_BNDREGS_MASK and XSTATE_BNDCSR_MASK;
real hardware will only show them if the MPX bit is set in CPUID;
this is never the case for hvf_get_supported_cpuid() because QEMU's
Hypervisor.framework support does not handle the VMX fields related to
MPX (even in the unlikely possibility that the host has MPX enabled).
So hide those bits in the new cache_host_xcr0().
Cc: Phil Dennis-Jordan <lists@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Newer AMD CPUs support ERAPS (Enhanced Return Address Prediction Security)
feature that enables the auto-clear of RSB entries on a TLB flush, context
switches and VMEXITs. The number of default RSP entries is reflected in
RapSize.
Add the feature bit and feature word to support these features.
CPUID_Fn80000021_EAX
Bits Feature Description
24 ERAPS:
Indicates support for enhanced return address predictor security.
CPUID_Fn80000021_EBX
Bits Feature Description
31-24 Reserved
23:16 RapSize:
Return Address Predictor size. RapSize x 8 is the minimum number
of CALL instructions software needs to execute to flush the RAP.
15-00 MicrocodePatchSize. Read-only.
Reports the size of the Microcode patch in 16-byte multiples.
If 0, the size of the patch is at most 5568 (15C0h) bytes.
Link: https://www.amd.com/content/dam/amd/en/documents/epyc-technical-docs/programmer-references/57238.zip
Signed-off-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/7c62371fe60af1e9bbd853f5f8e949bf2d908bd0.1729807947.git.babu.moger@amd.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID leaf 0x80000022, i.e. ExtPerfMonAndDbg, advertises new performance
monitoring features for AMD processors. Bit 0 of EAX indicates support
for Performance Monitoring Version 2 (PerfMonV2) features. If found to
be set during PMU initialization, the EBX bits can be used to determine
the number of available counters for different PMUs. It also denotes the
availability of global control and status registers.
Add the required CPUID feature word and feature bit to allow guests to
make use of the PerfMonV2 features.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/a96f00ee2637674c63c61e9fc4dee343ea818053.1729807947.git.babu.moger@amd.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no real reason to make user-creatable classes different
from other backends in this respect. This also allows modularized
character devices to be treated by qom-list-properties just like
builtin ones.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
object_initialize() can use modules (it was added there because
virtio-gpu-device is a child device of virtio-gpu-pci; commit
64f7aece8e, "object_initialize: try module load", 2020-09-15).
object_new() cannot; make things consistent.
qdev_new() is now just a simple wrapper that returns DeviceState.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Put together the common code of object_initialize() and
module_object_class_by_name() into a function that supports
Error **. Rename the existing function type_get_by_name() to
clarify that it will only look at defined types; this is often
okay within object.c to look at the parents, but not outside it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A small optimization/code simplification, that also makes it clear that
we won't look for a type in a not-loaded-yet module---the module will
have been loaded by a call to module_object_class_by_name(), if present.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function has been unused since commit 4fa28f2390 ("ppc/pnv:
Instantiate cores separately", 2019-12-17). The idea was that
you could use it to build an array of objects via pointer
arithmetic, but no one is doing it anymore.
Cc: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The check of cpu->phys_bits to be in range between
[32, TARGET_PHYS_ADDR_SPACE_BITS] in host_cpu_realizefn()
is duplicated with check in x86_cpu_realizefn().
Since the ckeck in x86_cpu_realizefn() is called later and can cover all
the x86 cases. Remove the one in host_cpu_realizefn().
Opportunistically adjust cpu->phys_bits directly in
host_cpu_adjust_phys_bits(), which matches more with the function name.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20240929085747.2023198-1-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ops is assigned again just below, and the result of the assignment must
be non-NULL.
Originally, the check for NULL was meant to be a check for the existence
of the ops class:
ops = ACCEL_OPS_CLASS(object_class_by_name(ops_name));
...
g_assert(ops != NULL);
(where the ops assignment begot the one that I am removing); but this is
meaningless now that oc is checked to be non-NULL before ops is assigned
(commit 5141e9a23f, "accel: abort if we fail to load the accelerator
plugin", 2022-11-06).
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The mipsel architecture is not available in Debian Trixie, and it will
likely be a hard failure as soon as we drop support for the old Rust
toolchain in Debian Bookworm. Prepare by deprecating 32-bit little
endian MIPS in QEMU 9.2.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While right now 64-bit MIPS and 32-bit MIPS share the code in QEMU,
Rust uses different rules for the target. Set $cpu correctly to
either mips or mips64 (--cpu=mips64* is already accepted in the case
statement that canonicalizes cpu/host_arch/linux_arch), and adjust
the checks to account for the different between $cpu (which handles
mips/mips64 separately) and $host_arch (which does not).
Fixes: 1a6ef6ff62 ("configure, meson: detect Rust toolchain", 2024-10-11)
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fix an access to VXSAT
* Expose RV32 cpu to RV64 QEMU
* Don't clear PLIC pending bits on IRQ lowering
* Make PLIC zeroth priority register read-only
* Set vtype.vill on CPU reset
* Check and update APLIC pending when write sourcecfg
* Avoid dropping charecters with HTIF
* Apply FIFO backpressure to guests using SiFive UART
* Support for control flow integrity extensions
* Support for the IOMMU with the virt machine
* set 'aia_mode' to default in error path
* clarify how 'riscv-aia' default works
-----BEGIN PGP SIGNATURE-----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=rPaa
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu into staging
RISC-V PR for 9.2
* Fix an access to VXSAT
* Expose RV32 cpu to RV64 QEMU
* Don't clear PLIC pending bits on IRQ lowering
* Make PLIC zeroth priority register read-only
* Set vtype.vill on CPU reset
* Check and update APLIC pending when write sourcecfg
* Avoid dropping charecters with HTIF
* Apply FIFO backpressure to guests using SiFive UART
* Support for control flow integrity extensions
* Support for the IOMMU with the virt machine
* set 'aia_mode' to default in error path
* clarify how 'riscv-aia' default works
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmci/tQACgkQr3yVEwxT
# gBNPAQ//dZKjjJm4Sh+UFdUslivBJYtL1rl2UUG2UqiNn/UoYh/vcHoSArljHTjt
# 8riEStnaQqXziOpMIJjIMLJ4KoiIk2SMvjNfFtcmPiPZEDEpjsTxfUxBFsBee+fI
# 4KNQKKFeljq4pa+VzVvXEqzCNJIzCThFXTZhZmer00M91HPA8ZQIHpv2JL1sWlgZ
# /HW24XEDFLGc/JsR55fxpPftlAqP+BfOrqMmbWy7x2Y+G8WI05hM2zTP/W8pnIz3
# z0GCRYSBlADtrp+3RqzTwQfK5pXoFc0iDktWVYlhoXaeEmOwo8IYxTjrvBGhnBq+
# ySX1DzTa23QmOIxSYYvCRuOxyOK9ziNn+EQ9FiFBt1h1o251CYMil1bwmYXMCMNJ
# rZwF1HfUx0g2GQW1ZOqh1eeyLO29JiOdV3hxlDO7X4bbISNgU6il5MXmnvf0/XVW
# Af3YhALeeDbHgHL1iVfjafzaviQc9+YrEX13eX6N2AjcgE5a3F7XNmGfFpFJ+mfQ
# CPgiwVBXat6UpBUGAt14UM+6wzp+crSgQR5IEGth+mKMKdkWoykvo7A2oHdu39zn
# 2cdzsshg2qcLLUPTFy06OOTXX382kCWXuykhHOjZ4uu2SJJ7R0W3PlYV8HSde2Vu
# Rj+89ZlUSICJNXXweQB39r87hNbtRuDIO22V0B9XrApQbJj6/yE=
# =rPaa
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 31 Oct 2024 03:51:48 GMT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu: (50 commits)
target/riscv: Fix vcompress with rvv_ta_all_1s
target/riscv/kvm: clarify how 'riscv-aia' default works
target/riscv/kvm: set 'aia_mode' to default in error path
docs/specs: add riscv-iommu
qtest/riscv-iommu-test: add init queues test
hw/riscv/riscv-iommu: add DBG support
hw/riscv/riscv-iommu: add ATS support
hw/riscv/riscv-iommu: add Address Translation Cache (IOATC)
test/qtest: add riscv-iommu-pci tests
hw/riscv/virt.c: support for RISC-V IOMMU PCIDevice hotplug
hw/riscv: add riscv-iommu-pci reference device
pci-ids.rst: add Red Hat pci-id for RISC-V IOMMU device
hw/riscv: add RISC-V IOMMU base emulation
hw/riscv: add riscv-iommu-bits.h
exec/memtxattr: add process identifier to the transaction attributes
target/riscv: Expose zicfiss extension as a cpu property
disas/riscv: enable disassembly for compressed sspush/sspopchk
disas/riscv: enable disassembly for zicfiss instructions
target/riscv: compressed encodings for sspush and sspopchk
target/riscv: implement zicfiss instructions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vcompress packs vl or less fields into vd, so the tail starts after the
last packed field. This could be more clearly expressed in the ISA,
but for now this thread helps to explain it:
https://github.com/riscv/riscv-v-spec/issues/796
Signed-off-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241030043538.939712-1-antonb@tenstorrent.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We do not have control in the default 'riscv-aia' default value. We can
try to set it to a specific value, in this case 'auto', but there's no
guarantee that the host will accept it.
Couple with this we're always doing a 'qemu_log' to inform whether we're
ended up using the host default or if we managed to set the AIA mode to
the QEMU default we wanted to set.
Change the 'riscv-aia' description to better reflect how the option
works, and remove the two informative 'qemu_log' that are now unneeded:
if no message shows, riscv-aia was set to the default or uset-set value.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241028182037.290171-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When failing to set the selected AIA mode, 'aia_mode' is left untouched.
This means that 'aia_mode' will not reflect the actual AIA mode,
retrieved in 'default_aia_mode',
This is benign for now, but it will impact QMP query commands that will
expose the 'aia_mode' value, retrieving the wrong value.
Set 'aia_mode' to 'default_aia_mode' if we fail to change the AIA mode
in KVM.
While we're at it, rework the log/warning messages to be a bit less
verbose. Instead of:
KVM AIA: default mode is emul
qemu-system-riscv64: warning: KVM AIA: failed to set KVM AIA mode
We can use a single warning message:
qemu-system-riscv64: warning: KVM AIA: failed to set KVM AIA mode 'auto', using default host mode 'emul'
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241028182037.290171-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a simple guideline to use the existing RISC-V IOMMU support we just
added.
This doc will be updated once we add the riscv-iommu-sys device.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-13-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add an additional test to further exercise the IOMMU where we attempt to
initialize the command, fault and page-request queues.
These steps are taken from chapter 6.2 of the RISC-V IOMMU spec,
"Guidelines for initialization". It emulates what we expect from the
software/OS when initializing the IOMMU.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
DBG support adds three additional registers: tr_req_iova, tr_req_ctl and
tr_response.
The DBG cap is always enabled. No on/off toggle is provided for it.
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add PCIe Address Translation Services (ATS) capabilities to the IOMMU.
This will add support for ATS translation requests in Fault/Event
queues, Page-request queue and IOATC invalidations.
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V IOMMU spec predicts that the IOMMU can use translation caches
to hold entries from the DDT. This includes implementation for all cache
commands that are marked as 'not implemented'.
There are some artifacts included in the cache that predicts s-stage and
g-stage elements, although we don't support it yet. We'll introduce them
next.
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
To test the RISC-V IOMMU emulation we'll use its PCI representation.
Create a new 'riscv-iommu-pci' libqos device that will be present with
CONFIG_RISCV_IOMMU. This config is only available for RISC-V, so this
device will only be consumed by the RISC-V libqos machine.
Start with basic tests: a PCI sanity check and a reset state register
test. The reset test was taken from the RISC-V IOMMU spec chapter 5.2,
"Reset behavior".
More tests will be added later.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Generate device tree entry for riscv-iommu PCI device, along with
mapping all PCI device identifiers to the single IOMMU device instance.
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V IOMMU can be modelled as a PCIe device following the
guidelines of the RISC-V IOMMU spec, chapter 7.1, "Integrating an IOMMU
as a PCIe device".
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V IOMMU PCI device we're going to add next is a reference
implementation of the riscv-iommu spec [1], which predicts that the
IOMMU can be implemented as a PCIe device.
However, RISC-V International (RVI), the entity that ratified the
riscv-iommu spec, didn't bother assigning a PCI ID for this IOMMU PCIe
implementation that the spec predicts. This puts us in an uncommon
situation because we want to add the reference IOMMU PCIe implementation
but we don't have a PCI ID for it.
Given that RVI doesn't provide a PCI ID for it we reached out to Red Hat
and Gerd Hoffman, and they were kind enough to give us a PCI ID for the
RISC-V IOMMU PCI reference device.
Thanks Red Hat and Gerd for this RISC-V IOMMU PCIe device ID.
[1] https://github.com/riscv-non-isa/riscv-iommu/releases/tag/v1.0.0
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20241016204038.649340-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V IOMMU specification is now ratified as-per the RISC-V
international process. The latest frozen specifcation can be found at:
https://github.com/riscv-non-isa/riscv-iommu/releases/download/v1.0/riscv-iommu.pdf
Add the foundation of the device emulation for RISC-V IOMMU. It includes
support for s-stage (sv32, sv39, sv48, sv57 caps) and g-stage (sv32x4,
sv39x4, sv48x4, sv57x4 caps).
Other capabilities like ATS and DBG support will be added incrementally
in the next patches.
Co-developed-by: Sebastien Boeuf <seb@rivosinc.com>
Signed-off-by: Sebastien Boeuf <seb@rivosinc.com>
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Jason Chien <jason.chien@sifive.com>
Message-ID: <20241016204038.649340-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This header will be used by the RISC-V IOMMU emulation to be added
in the next patch. Due to its size it's being sent in separate for
an easier review.
One thing to notice is that this header can be replaced by the future
Linux RISC-V IOMMU driver header, which would become a linux-header we
would import instead of keeping our own. The Linux implementation isn't
upstream yet so for now we'll have to manage riscv-iommu-bits.h.
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Extend memory transaction attributes with process identifier to allow
per-request address translation logic to use requester_id / process_id
to identify memory mapping (e.g. enabling IOMMU w/ PASID translations).
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241016204038.649340-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
sspush and sspopchk have equivalent compressed encoding taken from zcmop.
cmop.1 is sspush x1 while cmop.5 is sspopchk x5. Due to unusual encoding
for both rs1 and rs2 from space bitfield, this required a new codec.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-20-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Enable disassembly for sspush, sspopchk, ssrdp & ssamoswap.
Disasembly is only enabled if zimop and zicfiss ext is set to true.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-19-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This file was created by mistake in recent ed7667188 (9p: remove
'proxy' filesystem backend driver).
When cloning the repository using native git for windows, we see this:
Error: error: invalid path 'scripts/meson-buildoptions.'
Error: The process 'C:\Program Files\Git\bin\git.exe' failed with exit code 128
Link: https://lore.kernel.org/r/20241023073914.895438-1-pierrick.bouvier@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
LFENCE and SFENCE were introduced with the original SSE instruction set;
marking them incorrectly as cpuid(SSE2) causes failures for CPU models
that lack SSE2, for example pentium3.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We previously added a new job running Fedora with nightly rust
toolchain.
The standard rust toolchain distributed by Fedora is new enough,
however, to let us enable a CI build with that too.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Link: https://lore.kernel.org/r/20241015133925.311587-3-berrange@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Although we're not enabling rust by default yet, we can still add
rust and bindgen to the CI package list.
This demonstrates that we're not accidentally triggering unexpected
build behaviour merely from Rust being present. When we do dev work
to enable rust by default, this will show we're building correctly
on all platforms we target.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Link: https://lore.kernel.org/r/20241015133925.311587-2-berrange@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qapi_event_send_device_deleted is always included (together with the
rest of QAPI) in libqemuutil.a if either system-mode emulation or tools
are being built, and in that case the stub causes a duplicate symbol
to appear in libqemuutil.a.
Add the symbol only if events are not being requested.
Cc: qemu-stable@nongnu.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
sspush/sspopchk have compressed encodings carved out of zcmops.
compressed sspush is designated as c.mop.1 while compressed sspopchk
is designated as c.mop.5.
Note that c.sspush x1 exists while c.sspush x5 doesn't. Similarly
c.sspopchk x5 exists while c.sspopchk x1 doesn't.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Jim Shu <jim.shu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-18-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zicfiss has following instructions
- sspopchk: pops a value from shadow stack and compares with x1/x5.
If they dont match, reports a sw check exception with tval = 3.
- sspush: pushes value in x1/x5 on shadow stack
- ssrdp: reads current shadow stack
- ssamoswap: swaps contents of shadow stack atomically
sspopchk/sspush/ssrdp default to zimop if zimop implemented and SSE=0
If SSE=0, ssamoswap is illegal instruction exception.
This patch implements shadow stack operations for qemu-user and shadow
stack is not protected.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Jim Shu <jim.shu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-17-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Extra word 2 is stored during tcg compile and `decode_save_opc` needs
additional argument in order to pass the value. This will be used during
unwind to get extra information about instruction like how to massage
exceptions. Updated all callsites as well.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/594
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-16-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds one more word for tcg compile which can be obtained during
unwind time to determine fault type for original operation (example AMO).
Depending on that, fault can be promoted to store/AMO fault.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-15-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zicfiss protects shadow stack using new page table encodings PTE.W=1,
PTE.R=0 and PTE.X=0. This encoding is reserved if zicfiss is not
implemented or if shadow stack are not enabled.
Loads on shadow stack memory are allowed while stores to shadow stack
memory leads to access faults. Shadow stack accesses to RO memory
leads to store page fault.
To implement special nature of shadow stack memory where only selected
stores (shadow stack stores from sspush) have to be allowed while rest
of regular stores disallowed, new MMU TLB index is created for shadow
stack.
Furthermore, `check_zicbom_access` (`cbo.clean/flush/inval`) may probe
shadow stack memory and must always raise store/AMO access fault because
it has store semantics. For non-shadow stack memory even though
`cbo.clean/flush/inval` have store semantics, it will not fault if read
is allowed (probably to follow `clflush` on x86). Although if read is not
allowed, eventually `probe_write` will do store page (or access) fault (if
permissions don't allow it). cbo operations on shadow stack memory must
always raise store access fault. Thus extending `get_physical_address` to
recieve `probe` parameter as well.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-14-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Shadow stack instructions can be decoded as zimop / zcmop or shadow stack
instructions depending on whether shadow stack are enabled at current
privilege. This requires a TB flag so that correct TB generation and correct
TB lookup happens. `DisasContext` gets a field indicating whether bcfi is
enabled or not.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Jim Shu <jim.shu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-13-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zicfiss introduces a new state ssp ("shadow stack register") in cpu.
ssp is expressed as a new unprivileged csr (CSR_SSP=0x11) and holds
virtual address for shadow stack as programmed by software.
Shadow stack (for each mode) is enabled via bit3 in *envcfg CSRs.
Shadow stack can be enabled for a mode only if it's higher privileged
mode had it enabled for itself. M mode doesn't need enabling control,
it's always available if extension is available on cpu.
This patch also implements helper bcfi function which determines if bcfi
is enabled at current privilege or not.
Adds ssp to migration state as well.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Jim Shu <jim.shu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-12-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zicfiss [1] riscv cpu extension enables backward control flow integrity.
This patch sets up space for zicfiss extension in cpuconfig. And imple-
ments dependency on A, zicsr, zimop and zcmop extensions.
[1] - https://github.com/riscv/riscv-cfi
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Jim Shu <jim.shu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-11-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Jim Shu <jim.shu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241008225010.1861630-9-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
