Move the CPU functions into target_arch_cpu.c that are unique to each
CPU. These are defined in target_arch.h.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The GBM library detection does not need to be in the configure script,
since it does not have any user-facing options (there are no
--enable-gbm or --disable-gbm switches). Let's move it to meson.build
instead, so we don't have to clutter config-host.mak with the related
switches.
Additionally, only check for GBM if it is really required, i.e. if we
either compile with OpenGL or with virglrenderer support.
Message-Id: <20210714085045.797168-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If the users ran configure with --enable-libfdt=system, they likely did
that on purpose. We should not silently fall back to the internal libfdt
if the system libfdt is not usable, but report the problem with a proper
message instead.
Message-Id: <20210827120901.150276-3-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The check for libfdt currently has a flaw: If there is a system libfdt, the
meson.build code initialized the fdt variable with fdt = cc.find_library(...).
However, if this libfdt is too old and there is no internal dtc module
available, it continues with "fdt" pointing to the old and unusable version.
The check later in the file that tries to detect whether libfdt is necessary
then fails to trigger:
if not fdt.found() and fdt_required.length() > 0
error('fdt not available but required by targets ' + ', '.join(fdt_required))
endif
The build fails then during compilation instead, which is of course bad
since this is quite confusing and already wasted quite some time of the user.
Thus if libfdt is not usable, we should unset the "fdt" variable immediately
again, so that the build already fails during the configuration phase.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/255
Message-Id: <20210827120901.150276-2-thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Instead of using an ifdef ladder in arch_init.c (which we then have
to manually update every time we add or remove a target
architecture), have meson.build put "#define QEMU_ARCH QEMU_ARCH_FOO"
in the config-target.h file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210730105947.28215-5-peter.maydell@linaro.org
The logic before was
if not get_option('gnutls').auto() or have_system
Which is equivalent to
if get_option('gnutls').enabled() or get_option('gnutls').disabled() or have_system
This means that the check for gnutls is performed even if gnutls is
disabled, which means that the build system will insist on having
libtasn1 if gnutls is found, even if gnutls support is disabled.
When gnutls is disabled, the check for gnutls shouldn't be performed,
to ensure that further build system logic (like the check for
libtasn1) doesn't make decisions based on the presence of gnutls,
rather than the gnutls option.
After making this change, I can successfully ./configure --disable-gnutls
on my system with gnutls installed, but not libtasn1.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Message-Id: <20210806144947.321647-1-hi@alyssa.is>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
modinfo runs the preprocessor and therefore needs all generated input files
to be there. The "depends" clause does not work in Meson 0.55.3, so for
now use "input".
Part #2: Update the rule for target-specific modules too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210723120156.1183920-1-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no reason why we should keep VNC enabled when the user
specified --without-default-features.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210713093155.677589-3-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
modinfo runs the preprocessor and therefore needs all generated input files
to be there. The "depends" clause does not work in Meson 0.55.3, so for
now use "input".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, the block driver whitelists are only applied for the system
emulator. All other binaries still give unrestricted access to all block
drivers. There are use cases where this made sense because the main
concern was avoiding customers running VMs on less optimised block
drivers and getting bad performance. Allowing the same image format e.g.
as a target for 'qemu-img convert' is not a problem then.
However, if the concern is the supportability of the driver in general,
either in full or when used read-write, not applying the list driver
whitelist in tools doesn't help - especially since qemu-nbd and
qemu-storage-daemon now give access to more or less the same operations
in block drivers as running a system emulator.
In order to address this, introduce a new configure option that enforces
the driver whitelist in all binaries.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210709164141.254097-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For the *BSD family dlopen is already part of libc so it's not a hard
dependency to have a libdl.so library.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210714101536.16016-1-alex.bennee@linaro.org>
Let's put it with the rest of the TCG related output with the
accelerator.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210709143005.1554-29-alex.bennee@linaro.org>
Some versions of capstone have shipped a broken pkg-config file which
puts the -I path without the trailing '/capstone' suffix. This breaks
the ability to "#include <capstone.h>". Upstream and most distros have
fixed this, but a few stragglers remain, notably FreeBSD.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210625172211.451010-2-berrange@redhat.com>
Message-Id: <20210709143005.1554-7-alex.bennee@linaro.org>
Accelerator modularity does not work on Darwin:
ld: illegal thread local variable reference to regular symbol _current_cpu for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Fix by avoiding modular TCG builds.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210712122208.456264-1-pbonzini@redhat.com>
[AJB: manually merged typo fix]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
If we have gnutls >= 3.6.13, then it has enough functionality
and performance that we can use it as the preferred crypto
backend.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This introduces the build logic needed to decide whether we can
use gnutls as a crypto driver backend. The actual implementations
will be introduced in following patches. We only wish to use
gnutls if it has version 3.6.14 or newer, because that is what
finally brings HW accelerated AES-XTS mode for x86_64.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Originally we preferred to use nettle over gcrypt because
gnutls already links to nettle and thus it minimizes the
dependencies. In retrospect this was the wrong criteria to
optimize for.
Currently shipping versions of gcrypt have cipher impls that
are massively faster than those in nettle and this is way
more important. The nettle library is also not capable of
enforcing FIPS compliance, since it considers that out of
scope. It merely aims to provide general purpose impls of
algorithms, and usage policy is left upto the layer above,
such as GNUTLS.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The built-in AES+XTS implementation is used for the LUKS encryption
When building system emulators it is reasonable to expect that an
external crypto library is being used instead. The performance of the
builtin XTS implementation is terrible as it has no CPU acceleration
support. It is thus not worth keeping a home grown XTS implementation
for the built-in cipher backend.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The XTS cipher mode was introduced in gcrypt 1.8.0, which
matches QEMU's current minimum version.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The min gcrypt was bumped:
commit b33a84632a
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Fri May 14 13:04:08 2021 +0100
crypto: bump min gcrypt to 1.8.0, dropping RHEL-7 support
but this was accidentally lost in conflict resolution for
commit 5761251138
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Thu Jun 3 11:15:26 2021 +0200
configure, meson: convert crypto detection to meson
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The next version of lttng-libs will not require liburcu at run time anymore.
Therefore, it is expected that distros will not include the urcubp libraries
anymore when installing lttng-ust-devel.
To avoid future problems, just require pkg-config to detect lttng-ust.
The .pc files for lttng-ust correctly include liburcubp.a for static
builds, and have always done since pkg-config files were added in 2011.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210712155710.520889-1-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
While the default config works well enough it does end up enabling a
lot of stuff. For more minimal builds we can select a different list
of devices and let Kconfig work out what we want. For example:
../../configure --without-default-features \
--target-list=arm-softmmu,aarch64-softmmu \
--with-devices-aarch64=minimal
will override the aarch64-softmmu default set of devices with a more
minimal set of devices that just enables the virt and sbsa-ref models.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210707131744.26027-6-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for offering variation to our build configurations lets
move everything and rename it to default. Common included base configs
are also renamed.
During the cleanup the stale usb.mak and pci.mak references were
removed from MAINTAINERS.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210707131744.26027-5-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a target-specific Kconfig. We need the definitions in Kconfig so
the minikconf tool can verify they exits. However CONFIG_FOO is only
enabled for target foo via the meson.build rules.
Two architecture have a particularity, ARM and MIPS. As their
translators have been split you can potentially build a plain 32 bit
build along with a 64-bit version including the 32-bit subset.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210131111316.232778-6-f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707131744.26027-2-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some tests for glibc functions cause compilation to emit warnings but
still succeed even if the function is not there. Therefore, change
from cc.compiles to cc.links.
Reported-by: Richard Zak <richard.j.zak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Build tcg accel ops as module.
Which is only a small fraction of tcg.
Also only x86 for now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-30-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow building accelerators as module.
Start with qtest as first user.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-28-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-21-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add script to generate C source with a small
database containing the module meta-data.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-4-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add script to collect the module meta-data from the source code,
store the results in *.modinfo files.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-3-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While most libraries do not need a CONFIG_* symbol because the
"when:" clauses are enough, some do. Add them back or stop
using them if possible.
In the case of libpmem, the statement to add the CONFIG_* symbol
was still in configure, but could not be triggered because it
checked for "no" instead of "disabled" (and it would be wrong anyway
since the test for the library has not been done yet).
Reported-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Fixes: 587d59d6cc ("configure, meson: convert virgl detection to meson", 2021-07-06)
Fixes: 83ef16821a ("configure, meson: convert libdaxctl detection to meson", 2021-07-06)
Fixes: e36e8c70f6 ("configure, meson: convert libpmem detection to meson", 2021-07-06)
Fixes: 53c22b68e3 ("configure, meson: convert liburing detection to meson", 2021-07-06)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ceph Luminous (version 12.2.z) is almost 4 years old at this point.
Bump the requirement to get rid of the ifdef'ry in the code.
Qemu 6.1 dropped the support for RHEL-7 which was the last supported
OS that required an older librbd.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Message-Id: <20210702172356.11574-2-idryomov@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
move kvm files into kvm/
After the reshuffling, update MAINTAINERS accordingly.
Make use of the new directory:
target/s390x/kvm/
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-14-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Most of the build is not done via Makefiles, therefore the toolchain
variables are mostly unused. They are still used by tests/tcg
and pc-bios/roms, but most of them are not needed there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before switching the build system over to Meson, an icon was
added to the QEMU binary on Mac OS. This patch adds back that
feature; it piggybacks on the existing scripts/entitlement.sh,
which already does in-place changes to the executable on Darwin.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-Id: <20210705195328.36442-1-programmingkidx@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
And remove them from the summary, since now their outcome is verbosely
included in the meson output.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a duplicate of CONFIG_EVENTFD, handle it directly in meson.build.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
