Since we reset the serial counters, peers should also be reset to be sync.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240717171541.201525-4-marcandre.lureau@redhat.com>
Place the trace when the function enters, with arg value.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240717171541.201525-3-marcandre.lureau@redhat.com>
Mouse cursors with 8 bit alpha were downsampled to 1-bit opacity maps by
turning alpha values of 255 into 1 and everything else into 0. This
means that mostly-opaque pixels ended up completely invisible.
This patch changes the behaviour so that only pixels with less than 50%
alpha (0-127) are treated as transparent when converted to 1-bit alpha.
This greatly improves the subjective appearance of anti-aliased mouse
cursors, such as those used by macOS, when using a front-end UI without
support for alpha-blended cursors, such as some VNC clients.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240624101040.82726-1-phil@philjordan.eu>
It's 2024. 4k display resolutions are a thing these days.
Raise width and height limits of the qemu vnc server.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1596
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240530111029.1726329-1-kraxel@redhat.com>
Remove dpy_cursor_define_supported() as it brings no benefit today and
it has a few inherent problems.
All graphical displays except egl-headless support cursor composition
without DMA-BUF, and egl-headless is meant to be used in conjunction
with another graphical display, so dpy_cursor_define_supported()
always returns true and meaningless.
Even if we add a new display without cursor composition in the future,
dpy_cursor_define_supported() will be problematic as a cursor display
fix for it because some display devices like virtio-gpu cannot tell the
lack of cursor composition capability to the guest and are unable to
utilize the value the function returns. Therefore, all non-headless
graphical displays must actually implement cursor composition for
correct cursor display.
Another problem with dpy_cursor_define_supported() is that it returns
true even if only some of the display listeners support cursor
composition, which is wrong unless all display listeners that lack
cursor composition is headless.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Phil Dennis-Jordan <phil@philjordan.eu>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240715-cursor-v3-4-afa5b9492dbf@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add accelerated cursor composition to ui/cocoa. This does not only
improve performance for display devices that exposes the capability to
the guest according to dpy_cursor_define_supported(), but fixes the
cursor display for devices that unconditionally expects the availability
of the capability (e.g., virtio-gpu).
The common pattern to implement accelerated cursor composition is to
replace the cursor and warp it so that the replaced cursor is shown at
the correct position on the guest display for relative pointer devices.
Unfortunately, ui/cocoa cannot do the same because warping the cursor
position interfers with the mouse input so it uses CALayer instead;
although it is not specialized for cursor composition, it still can
compose images with hardware acceleration.
Co-authored-by: Phil Dennis-Jordan <phil@philjordan.eu>
Tested-by: Phil Dennis-Jordan <phil@philjordan.eu>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240715-cursor-v3-3-afa5b9492dbf@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
CGImageCreate | Apple Developer Documentation
https://developer.apple.com/documentation/coregraphics/1455149-cgimagecreate
> The color space is retained; on return, you may safely release it.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240715-cursor-v3-1-afa5b9492dbf@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This reverts commit 3eacf70bb5.
It was only needed because of duplicate objects caused by
declare_dependency(link_whole: ...), and can be dropped now
that meson.build specifies objects and dependencies separately
for the internal dependencies.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240524-objects-v1-2-07cbbe96166b@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Boolean return value is reversed, to align with QEMU_ALLOCATED_FLAG, so
all callers must be adapted. Also rename share_surface variable in
vga_draw_graphic() to reduce confusion.
No functional change.
Suggested-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20240605131444.797896-4-kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This eliminates the polling in cocoa_refresh and implements the
propagation of the mouse mode change from absolute to relative.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Phil Dennis-Jordan <phil@philjordan.eu>
Tested-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-ID: <20240322-mouse-v1-1-0b7d4d9bdfbf@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The dbus_display1_dep is not really used since all occurrences also
request gio independently. Just list the generated sources and drop
dbus_display1_dep.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This to avoid a build breakage :
../ui/gtk-egl.c: In function ‘gd_egl_draw’:
../ui/gtk-egl.c:73:9: error: unused variable ‘fence_fd’ [-Werror=unused-variable]
73 | int fence_fd;
| ^~~~~~~~
Fixes: fa6426805b ("ui/console: Use qemu_dmabuf_set_..() helpers instead")
Cc: Dongwon Kim <dongwon.kim@intel.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240515100520.574383-1-clg@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
By default, SDL disables the screen saver which prevents the host from powering
down the screen even if the screen is locked. This results in draining the
battery needlessly when the host isn't connected to a wall charger. Fix that by
enabling the screen saver.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20240512095945.1879-1-shentey@gmail.com>
Remove gtk_widget_get_scale_factor() usage from the calculation of
the motion events in the GTK backend to make it work correctly on
environments that have `gtk_widget_get_scale_factor() != 1`.
This scale factor usage had been introduced in the commit f14aab420c and
at that time the window size was used for calculating the things and it
was working correctly. However, in the commit 2f31663ed4 the logic
switched to use the widget size instead of window size and because of
the change the usage of scale factor becomes invalid (since widgets use
`vc->gfx.scale_{x, y}` for scaling).
Tested on Crostini on ChromeOS (15823.51.0) with an external display.
Fixes: 2f31663ed4 ("ui/gtk: use widget size for cursor motion event")
Fixes: f14aab420c ("ui: fix incorrect pointer position on highdpi with
gtk")
Signed-off-by: hikalium <hikalium@hikalium.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240512111435.30121-3-hikalium@hikalium.com>
Add gd_motion_event trace event for making it easy to debug
gd_motion_event related issues.
Signed-off-by: hikalium <hikalium@hikalium.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240512111435.30121-2-hikalium@hikalium.com>
To complete privatizing process of QemuDmaBuf, QemuDmaBuf struct def
is moved to dmabuf.c
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20240508175403.3399895-7-dongwon.kim@intel.com>
This commit introduces utility functions for the creation and deallocation
of QemuDmaBuf instances. Additionally, it updates all relevant sections
of the codebase to utilize these new utility functions.
v7: remove prefix, "dpy_gl_" from all helpers
qemu_dmabuf_free() returns without doing anything if input is null
(Daniel P. Berrangé <berrange@redhat.com>)
call G_DEFINE_AUTOPTR_CLEANUP_FUNC for qemu_dmabuf_free()
(Daniel P. Berrangé <berrange@redhat.com>)
v8: Introduction of helpers was removed as those were already added
by the previous commit
v9: set dmabuf->allow_fences to 'true' when dmabuf is created in
virtio_gpu_create_dmabuf()/virtio-gpu-udmabuf.c
removed unnecessary spaces were accidently added in the patch,
'ui/console: Use qemu_dmabuf_new() a...'
v11: Calling qemu_dmabuf_close was removed as closing dmabuf->fd will be
done in qemu_dmabuf_free anyway.
(Daniel P. Berrangé <berrange@redhat.com>)
v12: --- Calling qemu_dmabuf_close separately as qemu_dmabuf_free doesn't
do it.
--- 'dmabuf' is now allocated space so it should be freed at the end of
dbus_scanout_texture
v13: --- Immediately free dmabuf after it is released to prevent possible
leaking of the ptr
(Marc-André Lureau <marcandre.lureau@redhat.com>)
--- Use g_autoptr macro to define *dmabuf for auto clean up instead of
calling qemu_dmabuf_free
(Marc-André Lureau <marcandre.lureau@redhat.com>)
v14: --- (vhost-user-gpu) Change qemu_dmabuf_free back to g_clear_pointer
as it was done because of some misunderstanding (v13).
--- (vhost-user-gpu) g->dmabuf[m->scanout_id] needs to be set to NULL
to prevent freed dmabuf to be accessed again in case if(fd==-1)break;
happens (before new dmabuf is allocated). Otherwise, it would cause
invalid memory access when the same function is executed. Also NULL
check should be done before qemu_dmabuf_close (it asserts dmabuf!=NULL.).
(Marc-André Lureau <marcandre.lureau@redhat.com>)
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20240508175403.3399895-6-dongwon.kim@intel.com>
This commit updates all occurrences where these fields were
set directly have been updated to utilize helper functions.
v7: removed prefix, "dpy_gl_" from all helpers
v8: Introduction of helpers was removed as those were already added
by the previous commit
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20240508175403.3399895-5-dongwon.kim@intel.com>
This commit updates all instances where fields within the QemuDmaBuf
struct are directly accessed, replacing them with calls to these new
helper functions.
v6: fix typos in helper names in ui/spice-display.c
v7: removed prefix, "dpy_gl_" from all helpers
v8: Introduction of helpers was removed as those were already added
by the previous commit
v11: -- Use new qemu_dmabuf_close() instead of close(qemu_dmabuf_get_fd()).
(Daniel P. Berrangé <berrange@redhat.com>)
-- Use new qemu_dmabuf_dup_fd() instead of dup(qemu_dmabuf_get_fd()).
(Daniel P. Berrangé <berrange@redhat.com>)
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20240508175403.3399895-4-dongwon.kim@intel.com>
New header and source files are added for containing QemuDmaBuf struct
definition and newly introduced helpers for creating/freeing the struct
and accessing its data.
v10: Change the license type for both dmabuf.h and dmabuf.c from MIT to
GPL to be in line with QEMU's default license
v11: -- Added new helpers, qemu_dmabuf_close for closing dmabuf->fd,
qemu_dmabuf_dup_fd for duplicating dmabuf->fd
(Daniel P. Berrangé <berrange@redhat.com>)
-- Let qemu_dmabuf_fee to call qemu_dmabuf_close before freeing
the struct to make sure fd is closed.
(Daniel P. Berrangé <berrange@redhat.com>)
v12: Not closing fd in qemu_dmabuf_free because there are cases fd
should still be available even after the struct is destroyed
(e.g. virtio-gpu: res->dmabuf_fd).
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20240508175403.3399895-3-dongwon.kim@intel.com>
'fence_fd' needs to be validated always before being referenced
And the passing condition should include '== 0' as 0 is a valid
value for the file descriptor.
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20240508175403.3399895-2-dongwon.kim@intel.com>
Draw routine needs to be manually invoked in the next refresh
if there is a scanout blob from the guest. This is to prevent
a situation where there is a scheduled draw event but it won't
happen bacause the window is currently in inactive state
(minimized or tabified). If draw is not done for a long time,
gl_block timeout and/or fence timeout (on the guest) will happen
eventually.
v2: Use gd_gl_area_draw(vc) in gtk-gl-area.c
Suggested-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240426225059.3871283-1-dongwon.kim@intel.com>
We only support the most recent two versions of macOS (currently
macOS 13 Ventura and macOS 14 Sonoma), and our ui/cocoa.m code
already assumes at least macOS 12 Monterey or better, because it uses
NSScreen safeAreaInsets, which is 12.0-or-newer.
Remove the ifdefs that were providing backwards compatibility for
building on 10.12 and earlier versions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240502142904.62644-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
I observed [NSTrackingArea rect] becomes de-synchronized with the view
frame with some unknown condition, and fails to track mouse movement on
some area of the view. Specify NSTrackingInVisibleRect option to let
Cocoa automatically update NSTrackingArea, which also saves code for
synchronization.
Fixes: 91aa508d02 ("ui/cocoa: Let the platform toggle fullscreen")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240323-fixes-v2-3-18651a2b0394@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Resize the window so that the content will fit without zooming.
Fixes: 91aa508d02 ("ui/cocoa: Let the platform toggle fullscreen")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240323-fixes-v2-2-18651a2b0394@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[NSWindow setContentAspectRatio:] does not trigger window resize itself,
so the wrong aspect ratio will persist if nothing resizes the window.
Call [NSWindow setContentSize:] in such a case.
Fixes: 91aa508d02 ("ui/cocoa: Let the platform toggle fullscreen")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240323-fixes-v2-1-18651a2b0394@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Building dbus-display1.c explicitly as a static library drops -fPIC by
default, which may not be correct if it ends up linked to a shared
library.
Let the target decide how to build the unit, with or without -fPIC. This
makes commit 186acfbaf7 ("tests/qtest: Depend on dbus_display1_dep") no
longer relevant, as dbus-display1.c will be recompiled.
Fixes: c172136ea3 ("meson: ensure dbus-display generated code is built
before other units")
Reported-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
ui/curses is the only user of console_select(). Move the implementation
to ui/curses.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240319-console-v2-4-3fd6feef321a@daynix.com>
ui/cocoa needs to update the UI info and reset the keyboard state
tracker when switching the console, or the new console will see the
stale UI info or keyboard state. Previously, updating the UI info was
done with cocoa_switch(), but it is meant to be called when the surface
is being replaced, and may be called even when not switching the
console. ui/cocoa never reset the keyboard state, which resulted in
stuck keys.
Add ui/cocoa's own implementation of console_select(), which updates the
UI info and resets the keyboard state tracker.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240319-console-v2-3-3fd6feef321a@daynix.com>
console_select() is shared by other displays and a console_select() call
from one of them triggers console switching also in ui/curses,
circumventing key state reinitialization that needs to be performed in
preparation and resulting in stuck keys.
Use its internal state to track the current active console to prevent
such a surprise console switch.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240319-console-v2-2-3fd6feef321a@daynix.com>
A chardev-vc used to inherit the size of a graphic console when its
size not explicitly specified, but it often did not make sense. If a
chardev-vc is instantiated during the startup, the active graphic
console has no content at the time, so it will have the size of graphic
console placeholder, which contains no useful information. It's better
to have the standard size of text console instead.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240319-console-v2-1-3fd6feef321a@daynix.com>
The "Listener" connection, being private and under the control of the
qemu display, allows for the optimization of discarding pending
intermediary messages when queuing a new scanout. This ensures that the
client receives only the latest scanout update, improving communication
efficiency.
While the current implementation does not provide a mechanism for
clients who may wish to receive all updates, making this behavior
optional could be considered in the future. For now, adopting this new
default behavior accelerates the communication process without a
guarantee of delivering all updates.
The filter is removed when the connection is dropped.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
ui/vnc may have a bound console so pass it to qemu_console_is_graphic()
and qemu_text_console_put_keysym().
Fixes: 1d0d59fe29 ("vnc: allow binding servers to qemu consoles")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231211-vnc-v1-1-a3551d284809@daynix.com>
[-QemuCocoaView displayConsole:] can be called anytime so explicitly
take the BQL before it calls console_select().
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240224-cocoa-v12-9-e89f70bdda71@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The window will be resizable when zoom-to-fit is on.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240224-cocoa-v12-8-e89f70bdda71@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
QemuCocoaView used to have fullScreenWindow but now it's gone, so we
do no longer have to call the window specifically "normalWindow".
Instead, refer to it with [-QemuCocoaView window].
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240224-cocoa-v12-7-e89f70bdda71@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
It allows making the window full screen by clicking full screen button
provided by the platform (the left-top green button) and save some code.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240224-cocoa-v12-6-e89f70bdda71@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
A subview is positioned in the superview so the superview's frame
should be used instead of one of the window to determine the
coordinates.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240224-cocoa-v12-5-e89f70bdda71@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Core Graphics is not accelerated and slow.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240224-cocoa-v12-4-e89f70bdda71@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
ui/cocoa used to release all mouse buttons when it sees
NSEventTypeLeftMouseUp, NSEventTypeRightMouseUp, or
NSEventTypeOtherMouseUp, but it can instead release specific one
according to the delivered event.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240224-cocoa-v12-3-e89f70bdda71@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Instead of using mouse_event variable to tell to handle a mouse event
later, immediately call [-QemuCocoaView handleMouseEvent:buttons:].
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Message-ID: <20240224-cocoa-v12-2-e89f70bdda71@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Currently [-QemuCocoaView handleEventLocked:] parses the passed event,
stores operations to be done to variables, and perform them according
to the variables. This construct will be cluttered with variables and
hard to read when we need more different operations for different
events.
Split the methods so that we can call appropriate methods depending on
events instead of relying on variables.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240224-cocoa-v12-1-e89f70bdda71@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
macOS Sonoma changes the NSView.clipsToBounds to false by default
where it was true in earlier version of macOS. This causes the window
contents to be occluded by the frame at the top of the window. This
fixes the issue by conditionally compiling the clipping on Sonoma to
true. NSView only exposes the clipToBounds in macOS 14 and so has
to be fixed via conditional compilation.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1994
Signed-off-by: David Parsons <dave@daveparsons.net>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240224140620.39200-1-dave@daveparsons.net>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Provides a new display option, zoom-interpolation, that enables
interpolation of the scaled display when zoom-to-fit is enabled.
Also provides a corresponding view menu item to allow this to be toggled
as required.
Signed-off-by: Carwyn Ellis <carwynellis@gmail.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20231110161729.36822-2-carwynellis@gmail.com>
[PMD: QAPI @zoom-interpolation since 9.0]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>