Similar to commit df7b97ff, we are mishandling clients that
give an unaligned NBD_CMD_TRIM request, and potentially
trimming bytes that occur before their request; which in turn
can cause potential unintended data loss (unlikely in
practice, since most clients are sane and issue aligned trim
requests). However, while we fixed read and write by switching
to the byte interfaces of blk_, we don't yet have a byte
interface for discard. On the other hand, trim is advisory, so
rounding the user's request to simply ignore the first and last
unaligned sectors (or the entire request, if it is sub-sector
in length) is just fine.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1464173965-9694-1-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
drop the qemu_char_get_next_serial and use chardev prop instead
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-6-git-send-email-zxq_yx_007@163.com>
Tested-by: Michael Walle <michael@walle.cc>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Drop the old SysBus init function and use instance_init
* Call qemu_chr_add_handlers in the realize callback
* Use qdev chardev prop instead of qemu_char_get_next_serial
* Add lm32_uart_create function to create lm32 uart device
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-5-git-send-email-zxq_yx_007@163.com>
Tested-by: Michael Walle <michael@walle.cc>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Drop the old SysBus init function
* Call qemu_chr_add_handlers in the realize callback
* Use qdev chardev prop instead of qemu_char_get_next_serial
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-4-git-send-email-zxq_yx_007@163.com>
Tested-by: Michael Walle <michael@walle.cc>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Drop the old SysBus init function and use instance_init
* Call qemu_chr_add_handlers in the realize callback
* Use qdev chardev prop instead of qemu_char_get_next_serial
* Add etraxfs_ser_create function to create etraxfs serial device
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-3-git-send-email-zxq_yx_007@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Drop the old SysBus init function and use instance_init
* Call qemu_chr_add_handlers in the realize callback
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-2-git-send-email-zxq_yx_007@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 5b5660adf1,
as it breaks the UEFI guest firmware (known as ArmVirtPkg or AAVMF)
running in the "virt" machine type of "qemu-system-aarch64":
Contrary to the commit message, (a->mr == b->mr) does *not* imply
that (a->romd_mode == b->romd_mode): the pflash device model calls
memory_region_rom_device_set_romd() -- for switching between the above
modes --, and that function changes mr->romd_mode but the current
AddressSpaceDispatch's FlatRange keeps the old value. Therefore
region_del/region_add are not called on the KVM MemoryListener.
Reported-by: Drew Jones <drjones@redhat.com>
Tested-by: Drew Jones <drjones@redhat.com>
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=/Nln
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160527' into staging
linux-user pull request v2 for may 2016
# gpg: Signature made Fri 27 May 2016 12:51:10 BST using RSA key ID DE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
* remotes/riku/tags/pull-linux-user-20160527: (38 commits)
linux-user,target-ppc: fix use of MSR_LE
linux-user/signal.c: Use s390 target space address instead of host space
linux-user/signal.c: Use target address instead of host address for microblaze restorer
linux-user/signal.c: Generate opcode data for restorer in setup_rt_frame
linux-user: arm: Remove ARM_cpsr and similar #defines
linux-user: Use direct syscalls for setuid(), etc
linux-user: x86_64: Don't use 16-bit UIDs
linux-user: Use g_try_malloc() in do_msgrcv()
linux-user: Handle msgrcv error case correctly
linux-user: Handle negative values in timespec conversion
linux-user: Use safe_syscall for futex syscall
linux-user: Use safe_syscall for pselect, select syscalls
linux-user: Use safe_syscall for execve syscall
linux-user: Use safe_syscall for wait system calls
linux-user: Use safe_syscall for open and openat system calls
linux-user: Use safe_syscall for read and write system calls
linux-user: Provide safe_syscall for fixing races between signals and syscalls
linux-user: Add debug code to exercise restarting system calls
linux-user: Support for restarting system calls for Microblaze targets
linux-user: Set r14 on exit from microblaze syscall
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
setup_frame()/setup_rt_frame()/restore_user_regs() are using
MSR_LE as the similar kernel functions do: as a bitmask.
But in QEMU, MSR_LE is a bit position, so change this
accordingly.
The previous code was doing nothing as MSR_LE is 0,
and "env->msr &= ~MSR_LE" doesn't change the value of msr.
And yes, a user process can change its endianness,
see linux kernel commit:
fab5db9 [PATCH] powerpc: Implement support for setting little-endian mode via prctl
and prctl(2): PR_SET_ENDIAN, PR_GET_ENDIAN
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The return address is in target space, so the restorer address needs to
be target space, too.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
The return address is in target space, so the restorer address needs to
be target space, too.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Original implementation uses do_rt_sigreturn directly in host space,
when a guest program is in unwind procedure in guest space, it will get
an incorrect restore address, then causes unwind failure.
Also cleanup the original incorrect indentation.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The #defines of ARM_cpsr and friends in linux-user/arm/target-syscall.h
can clash with versions in the system headers if building on an
ARM or AArch64 build (though this seems to be dependent on the version
of the system headers). The QEMU defines are not very useful (it's
not clear that they're intended for use with the target_pt_regs struct
rather than (say) the CPUARMState structure) and we only use them in one
function in elfload.c anyway. So just remove the #defines and directly
access regs->uregs[].
Reported-by: Christopher Covington <cov@codeaurora.org>
Tested-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
On Linux the setuid(), setgid(), etc system calls have different semantics
from the libc functions. The libc functions follow POSIX and update the
credentials for all threads in the process; the system calls update only
the thread which makes the call. (This impedance mismatch is worked around
in libc by signalling all threads to tell them to do a syscall, in a
byzantine and fragile way; see http://ewontfix.com/17/.)
Since in linux-user we are trying to emulate the system call semantics,
we must implement all these syscalls to directly call the underlying
host syscall, rather than calling the host libc function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The 64-bit x86 syscall ABI uses 32-bit UIDs; only define
USE_UID16 for 32-bit x86.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In do_msgrcv() we want to allocate a message buffer, whose size
is passed to us by the guest. That means we could legitimately
fail, so use g_try_malloc() and handle the error case, in the same
way that do_msgsnd() does.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The msgrcv ABI is a bit odd -- the msgsz argument is a size_t, which is
unsigned, but it must fail EINVAL if the value is negative when cast
to a long. We were incorrectly passing the value through an
"unsigned int", which meant that if the guest was 32-bit longs and
the host was 64-bit longs an input of 0xffffffff (which should trigger
EINVAL) would simply be passed to the host msgrcv() as 0xffffffff,
where it does not cause the host kernel to reject it.
Follow the same approach as do_msgsnd() in using a ssize_t and
doing the check for negative values by hand, so we correctly fail
in this corner case.
This fixes the msgrcv03 Linux Test Project test case, which otherwise
hangs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In a struct timespec, both fields are signed longs. Converting
them from guest to host with code like
host_ts->tv_sec = tswapal(target_ts->tv_sec);
mishandles negative values if the guest has 32-bit longs and
the host has 64-bit longs because tswapal()'s return type is
abi_ulong: the assignment will zero-extend into the host long
type rather than sign-extending it.
Make the conversion routines use __get_user() and __set_user()
instead: this automatically picks up the signedness of the
field type and does the correct kind of sign or zero extension.
It also handles the possibility that the target struct is not
sufficiently aligned for the host's requirements.
In particular, this fixes a hang when running the Linux Test Project
mq_timedsend01 and mq_timedreceive01 tests: one of the test cases
sets the timeout to -1 and expects an EINVAL failure, but we were
setting a very long timeout instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the futex syscall.
In particular, this fixes hangs when using programs that link
against the Boehm garbage collector, including the Mono runtime.
(We don't change the sys_futex() call in the implementation of
the exit syscall, because as the FIXME comment there notes
that should be handled by disabling signals, since we can't
easily back out if the futex were to return ERESTARTSYS.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the safe_syscall wrapper for the pselect and select syscalls.
Since not every architecture has the select syscall, we now
have to implement select in terms of pselect, which means doing
timeval<->timespec conversion.
(Five years on from the initial patch that added pselect support
to QEMU and a decade after pselect6 went into the kernel, it seems
safe to not try to support hosts with header files which don't
define __NR_pselect6.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Wrap execve() in the safe-syscall handling. Although execve() is not
an interruptible syscall, it is a special case: if we allow a signal
to happen before we make the host$ syscall then we will 'lose' it,
because at the point of execve the process leaves QEMU's control. So
we use the safe syscall wrapper to ensure that we either take the
signal as a guest signal, or else it does not happen before the
execve completes and makes it the other program's problem.
The practical upshot is that without this SIGTERM could fail to
terminate the process.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-25-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: expanded commit message to explain in more detail why this is
needed, and add comment about it too]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use safe_syscall for waitpid, waitid and wait4 syscalls. Note that this
change allows us to implement support for waitid's fifth (rusage) argument
in future; for the moment we ignore it as we have done up til now.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-18-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Adjust to new safe_syscall convention. Add fifth waitid syscall argument
(which isn't present in the libc interface but is in the syscall ABI)]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Restart open() and openat() if signals occur before,
or during with SA_RESTART.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-17-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Adjusted to follow new -1-and-set-errno safe_syscall convention]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Restart read() and write() if signals occur before, or during with SA_RESTART
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-15-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Update to new safe_syscall() convention of setting errno]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If a signal is delivered immediately before a blocking system call the
handler will only be called after the system call returns, which may be a
long time later or never.
This is fixed by using a function (safe_syscall) that checks if a guest
signal is pending prior to making a system call, and if so does not call the
system call and returns -TARGET_ERESTARTSYS. If a signal is received between
the check and the system call host_signal_handler() rewinds execution to
before the check. This rewinding has the effect of closing the race window
so that safe_syscall will reliably either (a) go into the host syscall
with no unprocessed guest signals pending or or (b) return
-TARGET_ERESTARTSYS so that the caller can deal with the signals.
Implementing this requires a per-host-architecture assembly language
fragment.
This will also resolve the mishandling of the SA_RESTART flag where
we would restart a host system call and not call the guest signal handler
until the syscall finally completed -- syscall restarting now always
happens at the guest syscall level so the guest signal handler will run.
(The host syscall will never be restarted because if the host kernel
rewinds the PC to point at the syscall insn for a restart then our
host_signal_handler() will see this and arrange the guest PC rewind.)
This commit contains the infrastructure for implementing safe_syscall
and the assembly language fragment for x86-64, but does not change any
syscalls to use it.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-14-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM:
* Avoid having an architecture if-ladder in configure by putting
linux-user/host/$(ARCH) on the include path and including
safe-syscall.inc.S from it
* Avoid ifdef ladder in signal.c by creating new hostdep.h to hold
host-architecture-specific things
* Added copyright/license header to safe-syscall.inc.S
* Rewrote commit message
* Added comments to safe-syscall.inc.S
* Changed calling convention of safe_syscall() to match syscall()
(returns -1 and host error in errno on failure)
* Added a long comment in qemu.h about how to use safe_syscall()
to implement guest syscalls.
]
RV: squashed Peters "fixup! linux-user: compile on non-x86-64 hosts"
patch
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If DEBUG_ERESTARTSYS is set restart all system calls once. This
is pure debug code for exercising the syscall restart code paths
in the per-architecture cpu main loops.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-10-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Add comment and a commented-out #define next to the commented-out
generic DEBUG #define; remove the check on TARGET_USE_ERESTARTSYS;
tweak comment message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the Microblaze main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Note that this in passing fixes a bug where we were corrupting
the guest r[3] on sigreturn with the guest's r[10] because
do_sigreturn() was returning env->regs[10] but the register for
syscall return values is env->regs[3].
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-11-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Commit message tweaks; drop TARGET_USE_ERESTARTSYS define;
drop whitespace changes]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
All syscall exits on microblaze result in r14 being equal to the
PC we return to, because the kernel syscall exit instruction "rtbd"
does this. (This is true even for sigreturn(); note that r14 is
not a userspace-usable register as the kernel may clobber it at
any point.)
Emulate the setting of r14 on exit; this isn't really a guest
visible change for valid guest code because r14 isn't reliably
observable anyway. However having the code and the comment helps
to explain why it's ok for the ERESTARTSYS handling not to undo
the changes to r14 that happen on syscall entry.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the tilegx main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* return -TARGET_QEMU_ESIGRETURN from sigreturn rather than current R_RE
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Note that this fixes a bug where a sigreturn which happened to have
an errno value in TILEGX_R_RE would incorrectly cause TILEGX_R_ERR
to get set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the CRIS main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-34-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the S390 main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-33-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; remove stray double semicolon; drop
TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the M68K main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-32-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the OpenRISC main loop code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
(We don't implement sigreturn on this target so there is no
code there to update.)
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-31-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the UniCore32 main loop code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
(We don't support signals on this target so there is no sigreturn code
to update.)
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-30-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the Alpha main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-13-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define;
PC is env->pc, not env->ir[IR_PV]]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the SH4 main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-12-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the SPARC main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-9-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Commit message tweaks; drop TARGET_USE_ERESTARTSYS define]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the 32-bit and 64-bit ARM main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-6-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the x86 main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code rather than passing it
back out as the "return code" from do_sigreturn()
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch EAX
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-5-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Commit message tweaks; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Currently we define a QEMU-internal errno TARGET_QEMU_ESIGRETURN
only on the MIPS and PPC targets; move this to errno_defs.h
so it is available for all architectures, and renumber it to 513.
We pick 513 because this is safe from future use as a system call return
value: Linux uses it as ERESTART_NOINTR internally and never allows that
errno to escape to userspace.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-4-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: TARGET_ERESTARTSYS split out into preceding patch, add comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Define TARGET_ERESTARTSYS; like the kernel, we will use this to
indicate that a guest system call should be restarted. We use
the same value the kernel does for this, 512.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
[PMM: split out from the patch which moves and renumbers
TARGET_QEMU_ESIGRETURN, add comment on usage]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Some of the signal handling was a mess with a mixture of tabs and 8 space
indents.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-3-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: just rebased]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The function do_openat() is not consistent about whether it is
returning a host errno or a guest errno in case of failure.
Standardise on returning -1 with errno set (ie caller has
to call get_errno()).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
I'm back from holidays now, and have re-collated the ppc patch queue.
This is a first pull request against the qemu-2.7 branch, mostly
consisting of patches which were posted before the 2.6 freeze, but
weren't suitable for late inclusion in the 2.6 branch.
* Assorted bugfixes and cleanups
* Some preliminary patches towards dynamic DMA windows and CPU hotplug
* Significant performance impovement for the spapr-llan device
* Added myself to MAINTAINERS for ppc (overdue)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=g96T
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160527' into staging
ppc patch queue for 2016-05-27 (first pull for qemu-2.7)
I'm back from holidays now, and have re-collated the ppc patch queue.
This is a first pull request against the qemu-2.7 branch, mostly
consisting of patches which were posted before the 2.6 freeze, but
weren't suitable for late inclusion in the 2.6 branch.
* Assorted bugfixes and cleanups
* Some preliminary patches towards dynamic DMA windows and CPU hotplug
* Significant performance impovement for the spapr-llan device
* Added myself to MAINTAINERS for ppc (overdue)
# gpg: Signature made Fri 27 May 2016 04:04:15 BST using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.7-20160527:
MAINTAINERS: Add David Gibson as ppc maintainer
spapr_iommu: Move table allocation to helpers
spapr_iommu: Finish renaming vfio_accel to need_vfio
spapr_pci: Use correct DMA LIOBN when composing the device tree
spapr: ensure device trees are always associated with DRC
PPC/KVM: early validation of vcpu id
Added negative check for get_image_size()
hw/net/spapr_llan: Provide counter with dropped rx frames to the guest
hw/net/spapr_llan: Delay flushing of the RX queue while adding new RX buffers
target-ppc: Cleanups to rldinm, rldnm, rldimi
target-ppc: Use 32-bit rotate instead of deposit + 64-bit rotate
target-ppc: Use movcond in isel
target-ppc: Correct KVM synchronization for ppc_hash64_set_external_hpt()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I've been de facto co-maintainer of all ppc target related code for some
time. Alex Graf isworking on other things and doesn't have a whole lot of
time for qemu ppc maintainership. So, update the MAINTAINERS file to
reflect this.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexander Graf <agraf@suse.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
At the moment presence of vfio-pci devices on a bus affect the way
the guest view table is allocated. If there is no vfio-pci on a PHB
and the host kernel supports KVM acceleration of H_PUT_TCE, a table
is allocated in KVM. However, if there is vfio-pci and we do yet not
KVM acceleration for these, the table has to be allocated by
the userspace. At the moment the table is allocated once at boot time
but next patches will reallocate it.
This moves kvmppc_create_spapr_tce/g_malloc0 and their counterparts
to helpers.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
