Bugfix after reboot when vmmouse was enabled and another OS which uses e.g. PS/2
mouse.
Details:
When a guest activated the vmmouse followed by a reboot the vmmouse was still
enabled and the PS/2 mouse was therefore unsusable. When another guest is then
booted without vmmouse support (e.g. PS/2 mouse) the mouse is not working.
Reason is that VMMouse has priority and disables all other mouse entities
and therefore must be disabled on reset.
Testscenario:
1.) Boot e.g. OS with VMMouse support (e.g. Windows with VMMouse tools)
2.) reboot
3.) Boot e.g. OS without VMMouse support (e.g. DOS) => PS/2 mouse doesn't work
any more. Fixes that issue.
Testscenario 2 by Jan Kiszka <jan.kiszka@siemens.com>:
Confirm that this patch fixes a real issue. Setup: qemu.git,
opensuse 11.4 guest, SDL graphic, system_reset while guest is using the
vmmouse. Without the patch, the vmmouse become unusable after the
reboot. Also, the mouse stays in absolute mode even before X starts again.
Fixed by:
Disabling the vmmouse in its reset handler.
Tested-by: Andreas F=E4rber <afaerber@suse.de>
Signed-off-by: Gerhard Wiesinger <lists@wiesinger.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The lockf() call in qemu_create_pidfile() aims at ensuring mutual
exclusion. We shouldn't close the pidfile on success (as introduced by
commit 1bbd1592), because that drops the lock as well [1]:
"File locks shall be released on first close by the locking process
of any file descriptor for the file."
Coverity may complain again about the leaked file descriptor; let's
worry about that later.
v1->v2:
- add reference to 1bbd1592
- explain the intentional fd leak in the source
[1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/lockf.html
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In some cases initializing the alarm timers can lead to non-negligable
overhead from programs that link against qemu-tool.o. At least,
setting a max-resolution WinMM alarm timer via mm_start_timer() (the
current default for Windows) can increase the "tick rate" on Windows
OSs and affect frequency scaling, and in the case of tools that run
in guest OSs such has qemu-ga, the impact can be fairly dramatic
(+20%/20% user/sys time on a core 2 processor was observed from an idle
Windows XP guest).
This patch doesn't address the issue directly (not sure what a good
solution would be for Windows, or what other situations it might be
noticeable), but it at least limits the scope of the issue to programs
that "opt-in" to using the main-loop.c functions by only enabling alarm
timers when qemu_init_main_loop() is called, which is already required
to make use of those facilities, so existing users shouldn't be
affected.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The __attribute__((constructor)) init_main_loop() automatically get
called if qemu-tool.o is linked in. On win32, this leads to
a qemu_notify_event() call which attempts to SetEvent() on a HANDLE that
won't be initialized until qemu_init_main_loop() is manually called,
breaking qemu-tools.o programs on Windows at runtime.
This patch checks for an initialized event handle before attempting to
set it, which is analoguous to how we deal with an unitialized
io_thread_fd in the posix implementation.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The build process of optionroms spits out an "rm ..." line. Moreover, it
removes all .o files that can be handy for debugging purposes. So
disable automatic intermediate removal.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There are scenarios on Linux with some SDL versions where
handle_activation is continuous invoked with state = SDL_APPINPUTFOCUS
and gain = 0 while we grabbed the input. This causes a ping-pong when we
grab the input after an absolute mouse entered the window.
As this sdl_grab_end was once introduced to work around a Windows-only
issue (0294ffb9c8), limit it to that platform.
CC: Erik Rull <erik.rull@rdsoftware.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
By grabbing the input already on button down, we leave the button in
that state for the host GUI. Thus it takes another click after releasing
the input again to synchronize the mouse button state.
Avoid this by grabbing on button up.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 6bb816031f8bc0aafc3476e6dfa4293ee3a5f106.
SDL_WM_GrabInput does not reliably bail out if grabbing is impossible.
So if we get here, we already lost and will block. But this can no
longer happen due to the check in sdl_grab_start. So this patch became
obsolete.
Conflicts:
sdl.c
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Consistently check for SDL_APPINPUTFOCUS before trying to grab the input
focus. Just checking for SDL_APPACTIVE doesn't work. Moving the check to
sdl_grab_start allows for some consolidation.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When the mouse mode changes to absolute while the SDL windows is not in
focus, refrain from grabbing the input. It would steal from some other
window.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
So far we overwrite the machine options completely with defaults if no
accel=value is provided. More user friendly is to fill in only
unspecified options. The new qemu_opts_set_defaults enables this.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allow to configure the MC146818 RTC via the new lost tick policy
property and replace rtc_td_hack with this mechanism.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds qemu_opts_set_defaults, an interface provide default values
for a QemuOpts set. Default options are parsed from a string and then
prepended to the list of existing options, or they serve as the sole
QemuOpts set.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Potentially tick-generating timer devices will gain a common property:
lock_tick_policy. It allows to encode 4 different ways how to deal with
tick events the guest did not process in time:
discard - ignore lost ticks (e.g. if the guest compensates for them
already)
delay - replay all lost ticks in a row once the guest accepts them
again
merge - if multiple ticks are lost, all of them are merged into one
which is replayed once the guest accepts it again
slew - lost ticks are gradually replayed at a higher frequency than
the original tick
Not all timer device will need to support all modes. However, all need
to accept the configuration via this common property.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
configure creates a linux-headers/asm symlink. Remove this when
doing a distclean.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Clarify the comment about tlb_flush()'s flush_global parameter,
so it is clearer what it does and why it is OK that the implementation
currently ignores it.
Reviewed-by: Andreas F=C3=A4rber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Up to now, there was no special section for the different
host operating systems used with QEMU.
scripts/get_maintainer.pl did not show a maintainer for
OS specific files and patches.
Therefore I added three hosts systems:
* POSIX for the majority of host systems which are supported.
This includes BSD and Linux host systems.
* LINUX is a special case of POSIX needed for some Linux specific
files and directories.
* W32, W64 for a well known family of closed source operating systems.
I also added myself as a maintainer for W32, W64.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Current './configure --static && make' fails for me:
LINK qemu-nbd
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lssl3
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lsmime3
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lnssutil3
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lnss3
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lplds4
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lplc4
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lnspr4
My system does not provide static libraries for nss, so
fix autoconfiguration by link checking.
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
CC: qemu-trivial <qemu-trivial@nongnu.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Added wrapper around pkg-config to allow:
- safe options injection via ${QEMU_PKG_CONFIG_FLAGS}
- spaces in path to pkg-config
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This lets the RTC get adjustments from the host NTP client.
The watchdog still uses the vm_clock. The previous behavior is
available with "-rtc clock=vm".
Cc: Andreas Färber <afaerber@suse.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch implements the RX channel of GRLIB UART with a FIFO to
improve data rate.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'target-arm.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
Add Cortex-A15 CPU definition
Add dummy implementation of generic timer cp15 registers
arm: store the config_base_register during cpu_reset
target-arm/helper.c: Don't assume softfloat int32 is 32 bits only
target-arm: Fix implementation of TLB invalidate operations
Commit 999e12bbe85c5dcf49bef13bce4f97399c7105f4 (sysbus: apic: ioapic:
convert to QEMU Object Model) introduced two typos, one of which broke
the mac99 machine.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This converts three devices because apic and ioapic are subclasses of sysbus.
Converting subclasses independently of their base class is prohibitively hard.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add -pcihost to SysBus devices to resolve name conflicts,
and clarify PCI vs. Internal PCI.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This converts two types because smbus is implemented as a subclass of i2c. It's
extremely difficult to convert these two independently.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This converts two devices at once because PIC subclasses ISA and converting
subclasses independently is extremely hard.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
These are various small stylistic changes which help make things more
consistent such that the automated conversion script can be simpler.
It's not necessary to agree or disagree with these style changes because all
of this code is going to be rewritten by the patch monkey script anyway.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Since we are still dynamically creating TypeInfo, we need to chain the
class_init function in order to be able to make use of it within subclasses of
TYPE_DEVICE.
This will disappear once we register TypeInfos directly.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In order to introduce inheritance while still using the qdev registration
interfaces, we need to be able to use a parent other than TYPE_DEVICE. Add a
new interface that allows this.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Right now, DeviceInfo acts as the class for qdev. In order to switch to a
proper ObjectClass derivative, we need to ween all of the callers off of
interacting directly with the info pointer.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is a very shallow integration. We register a TYPE_DEVICE but only use
QOM as basically a memory allocator. This will make all devices show up as
QOM objects but they will all carry the TYPE_DEVICE.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- update for new location of object.h
