Existing simpletrace backend allows to trace at max 6 args and does not
support strings. This newer tracelog format gets rid of fixed size records
and therefore allows to trace variable number of args including strings.
Sample trace with strings:
v9fs_version 0.000 tag=0xffff id=0x64 msize=0x2000 version=9P2000.L
v9fs_version_return 6.705 tag=0xffff id=0x64 msize=0x2000 version=9P2000.L
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Let's stop screwing up releases by having a script do the work that Anthony's
fat fingers can't seem to get right.
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* stefanha/trivial-patches:
tci: Support INDEX_op_bswap64_i64
target-i386: Use QEMU instead of Qemu
Makefile.hw: avoid overly large 'make clean' rm command
configure: Fix typo
arm_gic: Send dbg msgs to stderr not stdout
checkpatch: Add QEMU specific rule
qemu-config: Use QEMU instead of Qemu
libqtest: Fix socket_accept() to pass address_len
Makefile.user: Define CONFIG_USER_ONLY for libuser/
Makefile: Remove macro qapi-dir
Makefile: Remove BUILD_DIR from qapi-dir
Install 'bepo' keymap already included in Qemu source
The new rule detects two wrong variants of QEMU.
It was tested with commit b5a8fe5e.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Add s390_exit_reasons so kvm_stat doesn't crash when called on s390.
Look for 'vendor_id' in /proc/cpuinfo as well, instead of just for
'flags', so we can determine if we run on S390.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
* qemu-kvm/uq/master:
virtio/vhost: Add support for KVM in-kernel MSI injection
msix: Add msix_nr_vectors_allocated
kvm: Enable use of kvm_irqchip_in_kernel in hwlib code
kvm: Introduce kvm_irqchip_add/remove_irqfd
kvm: Make kvm_irqchip_commit_routes an internal service
kvm: Publicize kvm_irqchip_release_virq
kvm: Introduce kvm_irqchip_add_msi_route
kvm: Rename kvm_irqchip_add_route to kvm_irqchip_add_irq_route
msix: Introduce vector notifiers
msix: Invoke msix_handle_mask_update on msix_mask_all
msix: Factor out msix_get_message
kvm: update vmxcap for EPT A/D, INVPCID, RDRAND, VMFUNC
kvm: Enable in-kernel irqchip support by default
kvm: Add support for direct MSI injections
kvm: Update kernel headers
kvm: x86: Wire up MSI support for in-kernel irqchip
pc: Enable MSI support at APIC level
kvm: Introduce basic MSI support for in-kernel irqchips
Introduce MSIMessage structure
kvm: Refactor KVMState::max_gsi to gsi_count
Options allow for changes in commands behavior. This commit introduces
the QCO_NO_SUCCESS_RESP option, which causes a command to not emit a
success response.
This is needed by commands such as qemu-ga's guest-shutdown, which
may not be able to complete before the VM vanishes. In this case, it's
useful and simpler not to bother sending a success response.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The script is organized as a sequence of binfmt registrations, with a
check whether the to be registered architecture matches the host.
Add a missing fi for the SuperH section.
Reported-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The pkgutil.iter_modules() function provides a way to enumerate child
modules. Unfortunately it's missing in Python <2.7 so we must implement
similar behavior ourselves.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
The str.rpartition() function is related to str.split() and is used for
splitting strings. It was introduced in Python 2.5 and therefore cannot
be used in tracetool as Python 2.4 compatibility is required.
Replace the code using str.rsplit().
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
In Python 2.5 keyword arguments were added to __import__(). Avoid using
them to achieve Python 2.4 compatibility.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
The newer "except <exception-type> as <exception>:" syntax is not
supported by Python 2.4, we need to use "except <exception-type>,
<exception>:".
Tested all trace backends with Python 2.4.
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
As now that block handles only the prefix variable, the code can be much
simpler. This also removes the CONFIG_QEMU_PREFIX define as it is not
used by any C code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now only the qemu_*dir variables will become #defines. The other
directory names aren't used by the C code.
That means the following #defines won't be available in C code anymore:
- CONFIG_QEMU_BINDIR
- CONFIG_QEMU_LIBDIR
- CONFIG_QEMU_INCLUDEDIR
- CONFIG_QEMU_MANDIR
- CONFIG_QEMU_SYSCONFDIR
- CONFIG_QEMU_LIBEXECDIR
The following #defines are going to be kept because they are handled by
the qemu_* block on create_config:
- CONFIG_QEMU_CONFDIR
- CONFIG_QEMU_DATADIR
- CONFIG_QEMU_DOCDIR
This one will be kept because it is set directly by ./configure:
- CONFIG_QEMU_HELPERDIR
This patch keeps the 'prefix=*' (CONFIG_QEMU_PREFIX) pattern because
other variables may use $prefix on their config-host.mak definitions.
The remaining code will be simplified on a further patch.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The generic *dir section will eventually go away and be replaced with
qemu_* section. By now, both sections will be kept, while the variables
get renamed on config-host.mak.
With this patch, a XXXdir variable will become a CONFIG_QEMU_XXXDIR
define, and a qemu_XXXdir variable will become CONFIG_QEMU_XXXDIR as
well (instead of becoming a CONFIG_QEMU_QEMU_XXXDIR define).
Changes v1 -> v2:
- Rebase on top of newer qemu.git changes, that changed
"tr '[:lower:]' '[:upper:]'" to "LC_ALL=C tr '[a-z]' '[A-Z]'".
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Language keywords cannot be used as argument names. The DTrace backend
appends an underscore to the argument name in order to make the argument
name legal.
This patch adds 'in', 'next', and 'self' keywords to dtrace.py.
Also drop the unnecessary argument name lstrip() call. The
Arguments.build() method already ensures there is no space around
argument names. Furthermore it is misleading to do the lstrip() *after*
checking against keywords because the keyword check would not match if
spaces were in the name.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Alon Levy <alevy@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
The tracetool script is written in shell and has hit several portability
problems due to shell quirks or external tools across host platforms.
Additionally the amount of string processing and lack of real data
structures makes it tough to implement code generator backends for
tracers that are more complex.
This patch replaces the shell version of tracetool with a Python
version. The new tracetool design is:
scripts/tracetool.py - top-level script
scripts/tracetool/backend/ - tracer backends live here (simple, ust)
scripts/tracetool/format/ - output formats live here (.c, .h)
There is common code for trace-events definition parsing so that
backends can focus on generating code rather than parsing input.
Support for all existing backends (nop, stderr, simple, ust,
and dtrace) is added back in follow-up patches.
[Commit description written by Stefan Hajnoczi]
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Now that we have a hard dependency on python anyway, we can replace the
slow shell script to calculate the option ROM checksum with a fast AND
portable python version. Tested both with python 2.7 and 3.1.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The kvm kernel module includes a number of trace events which can be
useful when debugging system behavior. Even on production systems these
trace events can be used to observe guest behavior and identify the
source of problems.
The kvm_flightrecorder script is a command-line wrapper for the
/sys/kernel/debug/tracing interface. Kernel symbols do not need to be
installed.
This script captures a fixed-size buffer of KVM trace events. Recent
events overwrite the oldest events when the buffer size is exceeded and
it is possible to leave KVM tracing enabled for any period of time with
just a fixed-size buffer. If the buffer is large enough this script is
a useful tool for collecting detailed information after an issue occurs
with a guest. Hence the name "flight recorder".
The script can also be used in 'tail' mode to simply view KVM trace
events as they occur. This is handy for development and to ensure that
the guest is indeed running.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
It has happened more than once that patches that look perfectly sane
and work with simpletrace broke systemtap because they use 'next' as an
argument name for a tracing function. However, 'next' is a keyword for
systemtap, so we shouldn't use it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* stefanha/tracing:
tracetool: dtrace: handle in and next reserved words
tracetool: dtrace disabled-events fix
Makefile.target: code stp dependency on trace-events
Some locale settings let make fail or create wrong results
because tr '[:lower:]' '[:upper:]' which is used to convert
from lower to upper case depends on the locale.
With locale tr_TR.UTF-8, lower case 'i' is not converted to 'I'.
This results in wrong entries in config-host.h like these ones:
#define CONFIG_QEMU_PREFiX "/usr/local"
#define CONFIG_QEMU_BiNDiR "/usr/local/bin"
This problem was reported by Emre Ersin.
The same problem occurs when configure creates the target specific
files config-target.mak. They get wrong declarations:
TARGET_CRiS=y
TARGET_i386=y
TARGET_MiCROBLAZE=y
TARGET_MiPS64=y
TARGET_MiPS=y
TARGET_UNiCORE32=y
It is sufficient to restrict the conversion to the characters a-z.
Using this explicit range avoids the dependency on the locale
settings and is also shorter.
v2:
POSIX says that 'tr a-z' is unspecified outside of the POSIX
locale, so we must set LC_ALL=C to make sure that we are using
POSIX (hint from Eric Blake, thanks).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The idea behind qtest is pretty simple. Instead of executing a CPU via TCG or
KVM, rely on an external process to send events to the device model that the CPU
would normally generate.
qtest presents itself as an accelerator. In addition, a new option is added to
establish a qtest server (-qtest) that takes a character device. This is what
allows the external process to send CPU events to the device model.
qtest uses a simple line based protocol to send the events. Documentation of
that protocol is in qtest.c.
I considered reusing the monitor for this job. Adding interrupts would be a bit
difficult. In addition, logging would also be difficult.
qtest has extensive logging support. All protocol commands are logged with
time stamps using a new command line option (-qtest-log). Logging is important
since ultimately, this is a feature for debugging.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This introduces new test reporting infrastructure based on
gtester and gtester-report.
Also, all existing tests are moved to tests/, and tests/Makefile
is reorganized to factor out the commonalities in the rules.
Signed-off-by: Anthony Liguori <aliguori@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If there are "disabled" entries in the trace-events file then
linetod_nop() is called if the backend is dtrace, it's currently
not present. Also equivalent fix for stap.
Signed-off-by: Lee Essen <lee.essen@nowonline.co.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Right now, the semantics of next_list are complicated. The caller must:
* call start_list
* call next_list for each element *including the first*
* on the first call to next_list, the second argument should point to
NULL and the result is the head of the list. On subsequent calls,
the second argument should point to the last node (last result of
next_list) and next_list itself tacks the element at the tail of the
list.
This works for both input and output visitor, but having the visitor
write memory when it is only reading the list is ugly. Plus, relying
on *list to detect the first call is tricky and undocumented.
We can initialize so->entry in next_list instead of start_list, leaving
it NULL in start_list. This way next_list sees clearly whether it is
on the first call---as a bonus, it discriminates the cases based on
internal state of the visitor rather than external state. We can
also pull the assignment of the list head from generated code up to
next_list.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Objects going through the dealloc visitor can be only partially allocated.
Detect the situation and avoid a segfault. This also helps with the
input visitor, when there are errors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We can exit very soon if we enter a visitor with a preexisting error.
This simplifies some cases because we will not have to deal with
obj being non-NULL while *obj is NULL.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We've at least one UTF8 char in the qemu texi doc:
$ grep Tibor qemu-doc.texi
by Tibor "TS" Schütz.
$ man ./qemu.1 | grep Tibor
by Tibor "TS" SchA~Xtz.
This patch allows utf8 in man/pod docs.
Initially it was split into two parts and sent on 2012-02-02.
Resending it again (3rd time) now in merged form. If any
other generalizations of $(POD2MAN) are needed it can be done
in a separate patch. Current form of $(POD2MAN) is choosen
to be able to easily change it if some implementation does
not support utf8 or resulting output has issues with local
man(1) program/macros.
First, add @documentencoding in scripts/texi2pod.pl:
Currently our texi2pod ignores @documentencoding even if it is set
properly in *.texi files. This results in a mojibake in documents
generated from qemu.pod (which is generated from qemu-doc.texi by
texi2pod), because the rest of the tools assumes ASCII encoding.
This patch recognizes first @documentencoding in input and places
it at the beginning of output as =encoding directive.
Second, run pod2man with --utf8 option to enable utf8 in manpages:
This option makes no difference for manpages which contains only
ascii chars. But for manpages with actual UTF8 characters (qemu
docs contains these), this change allows to see real characters
instead of mojibakes or substitutes.
Signed-off-By: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add a script that enhances gdb to be aware of QEMU data structures.
This patch adds a single gdb command, 'qemu mtree'. The command is
similar to the monitor's 'info mtree', except that it prints MemoryRegion
addresses, and except for working from a core dump as well as a live instance.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* kwolf/for-anthony:
test-coroutine: add performance test for nesting
coroutine: adding configure option for sigaltstack coroutine backend
coroutine: adding configure choose mechanism for coroutine backend
coroutine: adding sigaltstack method (.c source)
qcow2: Reduce number of I/O requests
qcow2: Add qcow2_alloc_clusters_at()
qcow2: Factor out count_cow_clusters
qmp: convert blockdev-snapshot-sync to a wrapper around transactions
add mode field to blockdev-snapshot-sync transaction item
rename blockdev-group-snapshot-sync
qapi: complete implementation of unions
use QSIMPLEQ_FOREACH_SAFE when freeing list elements
Add 'make check-block'
make check: Add qemu-iotests subset
qemu-iotests: Mark some tests as quick
qcow2: Add error messages in qcow2_truncate
block: handle -EBUSY in bdrv_commit_all()
qcow2: Add some tracing
qed: do not evict in-use L2 table cache entries
Group snapshot: Fix format name for backing file
SystemTap provides a "semaphore" that can optionally be tested before
executing a trace event. The purpose of this mechanism is to skip
expensive tracing code when the trace event is disabled.
For example, some applications may have trace events that format or
convert strings for trace events. This expensive processing should only
be done in the case where the trace event is enabled.
Since QEMU's generated trace events never have such special-purpose
code, there is no reason to add the semaphore check.
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Adds a 'TRACE_${NAME}_ENABLED' preprocessor define for each tracing event in
"trace.h".
This lets the user conditionally compile code with a relatively high execution
cost that is only necessary when producing the tracing information for an event
that is enabled.
Note that events using this define will probably have the "disable" property by
default, in order to avoid such costs on regular builds.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
We're supposed to keep qerror definitions and table entries in
alphabetical order. In practice this is not checked.
I haven't found a nice way to integrate this into the makefile yet but
we can at least have this script which verifies that qerrors are in
alphabetical order.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The fixes to qapi code generation had multiple bugs:
- the Null class used to drop output was missing some methods
- in some scripts it was never instantiated, leading to a None return,
which is missing even more methods
- the --source and --header options were swapped
Luckily, all those bugs were hidden by a makefile bug which caused the
old behaviour (with the race) to be invoked.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make's multiple output syntax
x.c x.h: x.template
gen < x.template
actually invokes the command once for x.c and once for x.h (with differing $@
in each invocation). During a parallel build, the two commands may be invoked
in parallel; this opens up a race, where the second invocation trashes a file
supposedly produced during the first, and now in use by a dependent command.
The various qapi code generators are susceptible to this; fix by making them
generate just one file per invocation.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently, we just print the numerical value of 9p operation identifier in
case of RERROR which is less meaningful for readability. Mapping 9p
operation ids to symbolic names provides a better tracelog:
RERROR (tag = 1 , id = TWALK , err = " No such file or directory ")
RERROR (tag = 1 , id = TUNLINKAT , err = " Directory not empty ")
This patch provides a dictionary of all possible 9p operation symbols mapped
to their numerical identifiers which are likely to be used in future at
various places in this script.
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Only print options in the help output that are accepted by our arch.
This is less confusing for users and also for other programs that
consume the help output.
The options affected are:
-g and -prom-env only displayed on PPC or SPARC
-win2k-hack, -rtc-td-hack, -no-fd-bootchk, -no-acpi, -no-hpet,
-acpitable, -smbios only displayed on i386
-semihosting only displayed on ARM, M68K or XTENSA
-old-param only displayed on ARM
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
