Commit Graph

52 Commits

Author SHA1 Message Date
Paul Burton 51b58561c1 loader: Support Flattened Image Trees (FIT images)
Introduce support for loading Flattened Image Trees, as used by modern
U-Boot. FIT images are essentially flattened device tree files which
contain binary images such as kernels, FDTs or ramdisks along with one
or more configuration nodes describing boot configurations.

The MIPS Boston board typically boots kernels in the form of FIT images,
and will make use of this code.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
[yongbok.kim@imgtec.com:
  fixed potential memory leaks,
  isolated building option]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-02-21 23:47:40 +00:00
Michael S. Tsirkin baf2d5bfba fw-cfg: support writeable blobs
Useful to send guest data back to QEMU.

Changes from Laszlo Ersek <lersek@redhat.com>:
- rebase the patch from Michael Tsirkin's original postings at [1] and [2]
  to the following patches:
  - loader: Allow a custom AddressSpace when loading ROMs
  - loader: Add AddressSpace loading support to uImages
  - loader: fix handling of custom address spaces when adding ROM blobs
- reject such writes immediately that would exceed the end of the array,
  rather than performing a partial write before setting the error bit: see
  the (len != dma.length) condition
- document the write interface

[1] http://lists.nongnu.org/archive/html/qemu-devel/2016-02/msg04968.html
[2] http://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg02735.html

Cc: "Gabriel L. Somlo" <somlo@cmu.edu>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: qemu-arm@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-18 22:59:53 +02:00
Laszlo Ersek 1b57bd4f2f loader: fix undefined behavior in rom_order_compare()
According to ISO C99 / N1256 (referenced in HACKING):

> 6.5.8 Relational operators
>
> 4 For the purposes of these operators, a pointer to an object that is
>   not an element of an array behaves the same as a pointer to the first
>   element of an array of length one with the type of the object as its
>   element type.
>
> 5 When two pointers are compared, the result depends on the relative
>   locations in the address space of the objects pointed to. If two
>   pointers to object or incomplete types both point to the same object,
>   or both point one past the last element of the same array object, they
>   compare equal. If the objects pointed to are members of the same
>   aggregate object, pointers to structure members declared later compare
>   greater than pointers to members declared earlier in the structure,
>   and pointers to array elements with larger subscript values compare
>   greater than pointers to elements of the same array with lower
>   subscript values. All pointers to members of the same union object
>   compare equal. If the expression /P/ points to an element of an array
>   object and the expression /Q/ points to the last element of the same
>   array object, the pointer expression /Q+1/ compares greater than /P/.
>   In all other cases, the behavior is undefined.

Our AddressSpace objects are allocated generally individually, and kept in
the "address_spaces" linked list, so we mustn't compare their addresses
with relops.

Convert the pointers subjected to the relop in rom_order_compare() to
"uintptr_t":

> 7.18.1.4 Integer types capable of holding object pointers
>
> 1 [...]
>
>   The following type designates an unsigned integer type with the
>   property that any valid pointer to void can be converted to this type,
>   then converted back to pointer to void, and the result will compare
>   equal to the original pointer:
>
>   /uintptr_t/
>
>   These types are optional.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-devel@nongnu.org
Fixes: 3e76099aac
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-30 04:22:18 +02:00
Laszlo Ersek aa6c6ae843 loader: fix handling of custom address spaces when adding ROM blobs
* Commit 3e76099aac ("loader: Allow a custom AddressSpace when loading
  ROMs") introduced the "Rom.as" field:

  (1) It modified the utility callers of rom_insert() to take "as" as a
      new parameter from *their* callers, and set "rom->as" from that
      parameter. The functions covered were rom_add_file() and
      rom_add_elf_program().

  (2) It also modified rom_insert() itself, to auto-assign
      "&address_space_memory", in case the external caller passed -- and
      the utility caller forwarded -- as=NULL.

  Except, commit 3e76099aac forgot to update the third utility caller of
  rom_insert(), under point (1), namely rom_add_blob().

* Later, commit 5e774eb3bd ("loader: Add AddressSpace loading support
  to uImages") added the load_uimage_as() function, and the
  rom_add_blob_fixed_as() function-like macro, with the necessary changes
  elsewhere to propagate the new "as" parameter to rom_add_blob():

    load_uimage_as()
      load_uboot_image()
        rom_add_blob_fixed_as()
          rom_add_blob()

  At this point, the signature (and workings) of rom_add_blob() had been
  broken already, and the rom_add_blob_fixed_as() macro passed its "_as"
  parameter to rom_add_blob() as "callback_opaque". Given that the
  "fw_callback" parameter itself was set to NULL (correctly), this did no
  additional damage (the opaque arg would never be used), but ultimately
  it broke the new functionality of load_uimage_as().

* The load_uimage_as() function would be put to use in one of the later
  patches, commit e481a1f63c ("generic-loader: Add a generic loader").

* We can fix this only in a unified patch now. Append "AddressSpace *as"
  to the signature of rom_add_blob(), and handle the new parameter. Pass
  NULL from all current callers, except from rom_add_blob_fixed_as(),
  where "_as" has to be bumped to the proper position.

* Note that rom_add_file() rejects the case when both "mr" and "as" are
  passed in as non-NULL. The action that this is apparently supposed to
  prevent is the

    rom->mr = mr;

  assignment (that's the only place where the "mr" parameter is used in
  rom_add_file()). In rom_add_blob() though, we have no "mr" parameter,
  and the actions done on the fw_cfg branch:

    if (fw_file_name && fw_cfg) {
        if (mc->rom_file_has_mr) {
            data = rom_set_mr(rom, OBJECT(fw_cfg), devpath);
            mr = rom->mr;
        } else {
            data = rom->data;
        }

  reflect those that are performed by rom_add_file() too (with mr==NULL):

    if (rom->fw_file && fw_cfg) {
        if ((!option_rom || mc->option_rom_has_mr) &&
            mc->rom_file_has_mr) {
            data = rom_set_mr(rom, OBJECT(fw_cfg), devpath);
        } else {
            data = rom->data;
        }

  Hence we need no additional restrictions in rom_add_blob().

* Stable is not affected as both problematic commits appeared first in
  v2.8.0-rc0.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: qemu-arm@nongnu.org
Cc: qemu-devel@nongnu.org
Fixes: 3e76099aac
Fixes: 5e774eb3bd
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-30 04:20:57 +02:00
Alistair Francis 93ffc7c766 loader: Add AddressSpace loading support to targphys
Add a new function load_image_targphys_as() that allows the caller
to specify an AddressSpace to use when loading a targphys. The
original load_image_targphys() function doesn't have any change in
functionality.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 87de45de7acf02cbe6bae9d6c4d6fb8f3aba4f61.1474331683.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:08 +01:00
Alistair Francis 5e774eb3bd loader: Add AddressSpace loading support to uImages
Add a new function load_uimage_as() that allows the caller to
specify an AddressSpace to use when loading the uImage. The
original load_uimage() function doesn't have any change in
functionality.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1254092e6b80d3cd3cfabafe165d56a96c54c0b5.1474331683.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:08 +01:00
Alistair Francis 70bb1d16f4 loader: Add AddressSpace loading support to ELFs
Add a new function load_elf_as() that allows the caller to specify an
AddressSpace to use when loading the ELF. The original load_elf()
function doesn't have any change in functionality.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 8b5cefecdf56fba4ccdff2db880f0b6b264cf16f.1474331683.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:08 +01:00
Alistair Francis 3e76099aac loader: Allow a custom AddressSpace when loading ROMs
When loading ROMs allow the caller to specify an AddressSpace to use for
the load.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 85f86b94ea94879e7ce8b12e85ac8de26658f7eb.1474331683.git.alistair.francis@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:08 +01:00
Alistair Francis d6ac342a48 loader: Use the specified MemoryRegion
Prevously the specified MemoryRegion was ignored during the rom register
reset. This patch uses the rom MemoryRegion is avaliable.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: d63fef5524deeb88e0068ca9d3fd4c8344f54dd4.1474331683.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:08 +01:00
Cao jin ed2f3bc1fa loader: fix potential memory leak
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-05-18 15:04:26 +03:00
Gerd Hoffmann bab47d9a75 Sort the fw_cfg file list
Entries are inserted in filename order instead of being
appended to the end in case sorting is enabled.

This will avoid any future issues of moving the file creation
around, it doesn't matter what order they are created now,
the will always be in filename order.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Added machine type handling for compatibility.  This was
a fairly complex change, this will preserve the order of fw_cfg
for older versions no matter what order the firmware files
actually come in.  A list is kept of the correct legacy order
and the entries will be inserted based upon their order in
the list.  Except that some entries are ordered (in a specific
area of the list) based upon what order they appear on the
command line.  Special handling is added for those entries.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-04-07 19:57:33 +03:00
Veronia Bahaa f348b6d1a5 util: move declarations out of qemu-common.h
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)

Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:17 +01:00
Markus Armbruster da34e65cb4 include/qemu/osdep.h: Don't include qapi/error.h
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef.  Since then, we've moved to include qemu/osdep.h
everywhere.  Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h.  That's in excess of
100KiB of crap most .c files don't actually need.

Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h.  Include qapi/error.h in .c files that need it and don't
get it now.  Include qapi-types.h in qom/object.h for uint16List.

Update scripts/clean-includes accordingly.  Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h.  Update the list of includes in the qemu/osdep.h
comment quoted above similarly.

This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third.  Unfortunately, the number depending on
qapi-types.h shrinks only a little.  More work is needed for that one.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:15 +01:00
Peter Crosthwaite 7ef295ea5b loader: Add data swap option to load-elf
Some CPUs are of an opposite data-endianness to other components in the
system. Sometimes elfs have the data sections layed out with this CPU
data-endianness accounting for when loaded via the CPU, so byte swaps
(relative to other system components) will occur.

The leading example, is ARM's BE32 mode, which is is basically LE with
address manipulation on half-word and byte accesses to access the
hw/byte reversed address. This means that word data is invariant
across LE and BE32. This also means that instructions are still LE.
The expectation is that the elf will be loaded via the CPU in this
endianness scheme, which means the data in the elf is reversed at
compile time.

As QEMU loads via the system memory directly, rather than the CPU, we
need a mechanism to reverse elf data endianness to implement this
possibility.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-04 11:30:21 +00:00
Peter Crosthwaite 04ae712a9f loader: add API to load elf header
Add an API to load an elf header header from a file. Populates a
buffer with the header contents, as well as a boolean for whether the
elf is 64b or not. Both arguments are optional.

Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Fix typo in comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-04 11:30:21 +00:00
Peter Maydell 76151cacfe loader: Add load_image_mr() to load ROM image to a MemoryRegion
Add a new function load_image_mr(), which behaves like
load_image_targphys() except that it loads the ROM image to
a specified MemoryRegion rather than to a specified physical
address. This is useful when a ROM blob needs to be loaded
to a particular flash or ROM device but the address of that
device in the machine's address space is not known. (For
instance, ROMs in devices, or ROMs which might exist in
a different address space to the system address space.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1455288361-30117-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-04 11:30:17 +00:00
Peter Maydell 18c86e2b9d hw/core: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-37-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:25 +00:00
Eduardo Habkost 71ae9e94d9 pc: Move option_rom_has_mr/rom_file_has_mr globals to MachineClass
This way, these settings can be simply set on the corresponding
machine_options() function, instead of requiring code in
pc_compat_*() functions.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-12-22 17:45:12 +02:00
Markus Armbruster df8abec8cb loader: Fix memory_region_init_resizeable_ram() error handling
Commit ef701d7 screwed up handling of out-of-memory conditions.
Before the commit, we report the error and exit(1), in one place.  The
commit lifts the error handling up the call chain some, to three
places.  Fine.  Except it uses &error_abort in these places, changing
the behavior from exit(1) to abort(), and thus undoing the work of
commit 3922825 "exec: Don't abort when we can't allocate guest
memory".

The previous commit fixed up uses of memory_region_init_ram().  One of
them was replaced by memory_region_init_resizeable_ram() [sic!] in
commit a166614, so Coccinelle missed it.  Fix it up.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1441983105-26376-4-git-send-email-armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
2015-09-18 14:39:35 +02:00
Daniel P. Berrange ef1e1e0782 maint: avoid useless "if (foo) free(foo)" pattern
The free() and g_free() functions both happily accept
NULL on any platform QEMU builds on. As such putting a
conditional 'if (foo)' check before calls to 'free(foo)'
merely serves to bloat the lines of code.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11 10:21:38 +03:00
Eric Auger 6b3f7f639e vl: move rom_load_all after machine init done
On ARM, commit ac9d32e396 postponed the
memory preparation for boot until the machine init done notifier. This
has for consequence to insert ROM at machine init done time.

However the rom_load_all function stayed called before the ROM are
inserted. As a consequence the rom_load_all function does not do
everything it is expected to do, on ARM.

It currently registers the ROM reset notifier but does not iterate through
the registered ROM list. the isrom field is not set properly. This latter
is used to report info in the monitor and also to decide whether the
rom->data can be freed on ROM reset notifier.

To fix that regression the patch moves the rom_load_all call after
machine init done. We also take the opportunity to rename the rom_load_all
function into rom_check_and_resgister_reset() and integrate the
rom_load_done in it.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reported-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1434470874-22573-1-git-send-email-eric.auger@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-07 11:03:16 +02:00
Paolo Bonzini 339240b5cd acpi-build: remove dependency from ram_addr.h
ram_addr_t is an internal interface, everyone should go through
MemoryRegion.  Clean it up by making rom_add_blob return a
MemoryRegion* and using the new qemu_ram_resize infrastructure.

Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-27 18:24:18 +02:00
Stefan Weil 6cbfb86f4c elf-loader: Fix truncation warning from coverity
Coverity reports a truncation due to cast operation on operand
reltab->sh_size from 64 bits to 32 bits for calls of load_at.

Fix the types of the function arguments to match their use in
function load_at: the offset is used for lseek which takes an
off_t parameter, the size is used for g_malloc and read.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-19 11:36:52 +03:00
Thomas Huth 5dce07e1cb elf-loader: Provide the possibility to relocate s390 ELF files
On s390, we would like to load our "BIOS" s390-ccw.img to the end of the
RAM. Therefor we need the possibility to relocate the ELF file so that
it can also run from different addresses. This patch adds the necessary
code to the QEMU ELF loader function.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Message-Id: <1425895973-15239-2-git-send-email-thuth@linux.vnet.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:27 +01:00
Markus Armbruster 1ce6be24df hmp: Name HMP info handler functions hmp_info_SUBCOMMAND()
Some are called do_info_SUBCOMMAND() (old ones, usually), some
hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND
pointlessly differs in spelling.

Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the
subcommand name with '-' replaced by '_'.

Exceptions:

* sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(),
  sun4m_hmp_info_pic().

* lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(),
  lm32_hmp_info_pic().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-18 11:58:50 +01:00
Peter Maydell aaf0301917 pc: resizeable ROM blocks
This makes ROM blocks resizeable.  This infrastructure is required for other
 functionality we have queued.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUrme8AAoJECgfDbjSjVRpqmEH/1APnrphAi/CM6rxf2hPyvWj
 f5yQDNXfeGxrHaW5vux6DvgHUkTng6KGBxz6XMSiwul6MeyRFNDqwbfMhSHjiIum
 QkT//jqb5xux60kyTLXuIBTPok1SsKDtaTxbvZb0VmZrnkdYeI2CLa1Mq3cQUY0a
 8DKnchQEM5lic9bxj+OuLiDFx8QYaMpQlUP9iIvNq6GjX+0zNsWvfPtkMTm00t93
 lHKPvD2eVmrgfS5g+lkAwLDahLSjqwDc0YuLABOgDUFsZFz9GAUCHSpt0y8HEBwR
 1NhGCfbnyyRl/1OSULtARGQ4Ddwm5dn1i5I4usoP5rLFS7FV5F7xhBu0IZlwgVA=
 =pFmm
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc: resizeable ROM blocks

This makes ROM blocks resizeable.  This infrastructure is required for other
functionality we have queued.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 08 Jan 2015 11:19:24 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  acpi-build: make ROMs RAM blocks resizeable
  memory: API to allocate resizeable RAM MR
  arch_init: support resizing on incoming migration
  exec: qemu_ram_alloc_resizeable, qemu_ram_resize
  exec: split length -> used_length/max_length
  exec: cpu_physical_memory_set/clear_dirty_range
  memory: add memory_region_set_size

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-01-10 21:02:23 +00:00
Michael S. Tsirkin a1666142db acpi-build: make ROMs RAM blocks resizeable
Use resizeable ram API so we can painlessly extend ROMs in the
future.  Note: migration is not affected, as we are
not actually changing the used length for RAM, which
is the part that's migrated.

Use this in acpi: reserve x16 more RAM space.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-08 13:17:55 +02:00
Laszlo Ersek 7d48a0f721 hw/loader: split out load_image_gzipped_buffer()
In the next patch we'd like to reuse the image decompression facility
without installing the output as a ROM at a specific guest-phys address.

In addition, expose LOAD_IMAGE_MAX_GUNZIP_BYTES, because that's a
straightforward "max_sz" argument for the new load_image_gzipped_buffer().

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-10-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 23:39:19 +00:00
Michael S. Tsirkin ad5b88b1f1 acpi-build: mark RAM dirty on table update
acpi build modifies internal FW CFG RAM on first access
but we forgot to mark it dirty.
If this RAM has been migrated already, it won't be
migrated again, returning corrupted tables to guest.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-24 20:57:10 +02:00
Gonglei ddd2eab72f loader: fix NEGATIVE_RETURNS
lseek will return -1 on error, g_malloc0(size) and read(,,size)
paramenters cannot be negative. We should add a check for return
value of lseek().

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-17 11:41:56 +01:00
Max Filippov 25bda50a0c hw/core/loader: implement address translation in uimage loader
Such address translation is needed when load address recorded in uImage
is a virtual address. When the actual load address is requested, return
untranslated address: user that needs the translated address can always
apply translation function to it and those that need it untranslated
don't need to do the inverse translation.

Add translation function pointer and its parameter to uimage_load
prototype. Update all existing users.

No user-visible functional changes.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
2014-11-03 00:59:10 +03:00
Peter Maydell 2b31cd4e08 - Memory: improve error reporting and avoid crashes on hotplug
- Build: fixing block/iscsi.so and ranlib warnings on Mac OS X
 - Migration fixes for x86
 - The odd KVM patch.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUEXeWAAoJEBvWZb6bTYby4AwP/0Hh55A7QzkkzZ66y65zM+G5
 dsgRcLjufHSRQHoNQqm6LOcicV3Ygc/X644EY6jnZCZxFh/fsWuTPqUDGxLAnxEc
 2V0PkLRIScAMOPezzxvRy6/9hkG+UYM3ZOL5D9yxA9pGuBtttw7tkts19Vqf9WZc
 NYG5TBDuEGM1c596Zpo7t10m+Oiw+Jyi5luLXsb4lh5ikdFPDrtJaf0AnFvR+ym0
 HXlj2K/0vHNowUeLoo+oWnZsW8mLE6OyJhgfo1tJtsH1BR+lQJnBnQ4moq4Sl/Wz
 +iht/4gtz34XwLILokFR6yiNrPe+MIryyv+FYxOD5loIdGVDtKMx30UkIE2/D933
 6/n5i3GBLi9JapeT9gkKTxk/UVRPzJ1PK07RWevgNZNQyTGKAUGp+p48nSzMYX7V
 7GFSy3Q8uqOR8g9n+t+RURxkoMNbhhw7v53Z3PPXPCALCMDzg9RARlW/nkfiExcZ
 oThUjE/8xfMTQlN1SO5HTyQXEkYjtknZhfC7/KFvkWYMbCG0KBTf212Md0zlTNkj
 +C6r8Gq4ZWVIc07QyKkoCMxB+a9Uhvy4T1PKuSlm6iu94zUgZRhdf/PlOXimhFqH
 9GL67Tv15kpj05xCS6jDXjeMZ416/UKw91OcsiT1UUHcq7/rc+GBycd0ngV1UgnQ
 di5V12IVt8JwdzFxMeCT
 =GIKW
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

- Memory: improve error reporting and avoid crashes on hotplug
- Build: fixing block/iscsi.so and ranlib warnings on Mac OS X
- Migration fixes for x86
- The odd KVM patch.

# gpg: Signature made Thu 11 Sep 2014 11:21:10 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg:                 aka "Paolo Bonzini <bonzini@gnu.org>"

* remotes/bonzini/tags/for-upstream: (21 commits)
  gdbstub: init mon_chr through qemu_chr_alloc
  pckbd: adding new fields to vmstate
  mc146818rtc: add missed field to vmstate
  piix: do not set irq while loading vmstate
  serial: fixing vmstate for save/restore
  parallel: adding vmstate for save/restore
  fdc: adding vmstate for save/restore
  cpu: init vmstate for ticks and clock offset
  apic_common: vapic_paddr synchronization fix
  vl: use QLIST_FOREACH_SAFE to visit change state handlers
  exec: add parameter errp to gethugepagesize
  exec: report error when memory < hpagesize
  hostmem-ram: don't exit qemu if size of memory-backend-ram is way too big
  memory: add parameter errp to memory_region_init_rom_device
  memory: add parameter errp to memory_region_init_ram
  exec: add parameter errp to qemu_ram_alloc and qemu_ram_alloc_from_ptr
  rules.mak: Fix DSO build by pulling in archive symbols
  util: Don't link host-utils.o if it's empty
  util: Move general qemu_getauxval to util/getauxval.c
  trace: Only link generated-tracers.o with "simple" backend
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-12 16:55:49 +01:00
Hu Tao 49946538d2 memory: add parameter errp to memory_region_init_ram
Add parameter errp to memory_region_init_ram and update all call sites
to pass in &error_abort.

Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-09 13:41:43 +02:00
Benjamin Herrenschmidt ea87616d6c loader: Add load_image_size() to replace load_image()
A subsequent patch to ppc/spapr needs to load the RTAS blob into
qemu memory rather than target memory (so it can later be copied
into the right spot at machine reset time).

I would use load_image() but it is marked deprecated because it
doesn't take a buffer size as argument, so let's add load_image_size()
that does.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[aik: fixed errors from checkpatch.pl]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-08 12:50:48 +02:00
Richard W.M. Jones 235e74afcb loader: Add load_image_gzipped function.
As the name suggests this lets you load a ROM/disk image that is
gzipped.  It is uncompressed before storing it in guest memory.

Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1407831259-2115-2-git-send-email-rjones@redhat.com
[PMM: removed stray space before ')']
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-19 19:02:40 +01:00
Peter Crosthwaite 401cf7fdc4 loader: Abstract away ref to memory region names
Use the function provided rather than spying on the struct.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-18 12:06:21 +02:00
Michael S. Tsirkin ac41881b48 pc: avoid duplicate names for ROM MRs
Since
commit 04920fc0fa
    loader: store FW CFG ROM files in RAM
RAM MRs including ROM files in FW CFGs are created
and named using the file basename.

This becomes problematic if these names are
supplied by user, since the basename might not
be unique.

There are two cases we care about:
- option-rom flag.
- option ROM for devices. This triggers e.g. when
  using rombar=0.

At the moment we get an assert. E.g
qemu -option-rom /usr/share/ipxe/8086100e.rom -option-rom
/usr/share/ipxe.efi/8086100e.rom
RAMBlock "/rom@genroms/8086100e.rom" already registered, abort!

This is a regression from 1.6.

For now let's keep it simple and just avoid creating the
MRs in case of option ROMs.

when using 1.7 machine types, enable
option ROMs in RAM to match that version.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-11 13:25:48 +02:00
Michael S. Tsirkin 98bc3ab0f2 loader: rename in_ram/has_mr
we put copy of ROMs in MR for migration.
but the name rom_in_ram makes one think we
load it in guest RAM.
Rename has_mr to make intent clearer.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-09 21:09:38 +02:00
Alexey Kardashevskiy 18674b2678 elf-loader: add more return codes
The existing load_elf() just returns -1 if it fails to load ELF. However
it could be smarter than this and tell more about the failure such as
wrong endianness or incompatible platform.

This adds additional return codes for wrong architecture, wrong
endianness and if the image is not ELF at all.

This adds a load_elf_strerror() helper to convert return codes into
string messages.

This fixes handling of what load_elf() returns for s390x, other
callers just check the return value for <0 and this remains unchanged.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05 03:06:46 +01:00
Edgar E. Iglesias 2a22165194 exec: Make cpu_physical_memory_write_rom input an AS
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11 22:57:44 +10:00
Alexander Graf 582b55a96a roms: Flush icache when writing roms to guest memory
We use the rom infrastructure to write firmware and/or initial kernel
blobs into guest address space. So we're basically emulating the cache
off phase on very early system bootup.

That phase is usually responsible for clearing the instruction cache for
anything it writes into cachable memory, to ensure that after reboot we
don't happen to execute stale bits from the instruction cache.

So we need to invalidate the icache every time we write a rom into guest
address space. We do not need to do this for every DMA since the guest
expects it has to flush the icache manually in that case.

This fixes random reboot issues on e5500 (booke ppc) for me.

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20 01:58:03 +01:00
Michael S. Tsirkin d916b46494 loader: allow adding ROMs in done callbacks
Don't abort if machine done callbacks add ROMs.

Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14 17:48:52 +03:00
Michael S. Tsirkin 35c12e60c8 loader: use file path size from fw_cfg.h
Avoid a bit of code duplication, make
max file path constant reusable.

Suggested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14 17:48:52 +03:00
Michael S. Tsirkin 48354cc5a3 loader: support for unmapped ROM blobs
Support ROM blobs not mapped into guest memory:
same as ROM files really but use caller's buffer.

Support invoking callback on access and
return memory pointer making it easier
for caller to update memory if necessary.

Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14 17:48:51 +03:00
Michael S. Tsirkin 04920fc0fa loader: store FW CFG ROM files in RAM
ROM files that are put in FW CFG are copied to guest ram, by BIOS, but
they are not backed by RAM so they don't get migrated.

Each time we change two bytes in such a ROM this breaks cross-version
migration: since we can migrate after BIOS has read the first byte but
before it has read the second one, getting an inconsistent state.

Future-proof this by creating, for each such ROM,
an MR serving as the backing store.
This MR is never mapped into guest memory, but it's registered
as RAM so it's migrated with the guest.

Naturally, this only helps for -M 1.7 and up, older machine types
will still have the cross-version migration bug.
Luckily the race window for the problem to trigger is very small,
which is also likely why we didn't notice the cross-version
migration bug in testing yet.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2013-08-21 00:18:39 +03:00
Martijn van den Broek 0dd5ce38fb Bugfix for loading multiboot kernels
This patch fixes a bug in rom_copy introduced by
commit d60fa42e8b.

rom_copy failed to load roms with a "datasize" of 0.
As a result, multiboot kernels were not loaded correctly
when they contain a segment with a "file size" of 0.

https://bugs.launchpad.net/qemu/+bug/1208944

Signed-off-by: Martijn van den Broek <martijn.vdbrk@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: CAG1x_oET1u3TMPu3r_zzd3ZXsTWQLiaM0zAc+RkHFCwvJjGOvg@mail.gmail.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-08-07 12:46:40 -05:00
Soren Brinkmann 84aee0deae hw/loader: Support ramdisk with u-boot header
Introduce 'load_ramdisk()' which can load "normal" ramdisks and ramdisks
with a u-boot header.
To enable this and leverage synergies 'load_uimage()' is refactored to
accomodate this additional use case.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1373323202-17083-2-git-send-email-soren.brinkmann@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-07-22 12:00:56 +01:00
Paolo Bonzini dfde4e6e1a memory: add ref/unref calls
Add ref/unref calls at the following places:

- places where memory regions are stashed by a listener and
  used outside the BQL (including in Xen or KVM).

- memory_region_find callsites

- creation of aliases and containers (only the aliased/contained
  region gets a reference to avoid loops)

- around calls to del_subregion/add_subregion, where the region
  could disappear after the first call

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:45 +02:00
Paolo Bonzini 052e87b073 memory: make section size a 128-bit integer
So far, the size of all regions passed to listeners could fit in 64 bits,
because artificial regions (containers and aliases) are eliminated by
the memory core, leaving only device regions which have reasonable sizes

An IOMMU however cannot be eliminated by the memory core, and may have
an artificial size, hence we may need 65 bits to represent its size.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-20 16:32:47 +02:00
Laszlo Ersek a88b362c6f refer to FWCfgState explicitly
Currently some places use pointer-to-void even though they mean
pointer-to-FWCfgState. Clean them up.

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-02 18:14:02 +03:00