As a prequel to any big Pin refactoring plans, do an in-place conversion
of qemu_irq to an Object, so that we can reference it in link<> properties.
Signed-off-by: Andreas Färber <afaerber@suse.de>
[ PC Changes:
* Removed array-alloctor ref counting logic (limit changes just to
* single IRQ allocator)
* Removed WIP marking from subject line
]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Allocate each IRQ individually on array allocations. This prepares for
QOMification of IRQs, where pointers to individual IRQs may be taken
and handed around for usage as QOM Links. The g_renew() scheme used here
is too fragile and would break all existing links should an IRQ list
be extended.
We now have to pass the IRQ count to qemu_free_irqs(). We have so few
call sites however, so this change is reasonably trivial.
Cc: agarcia@igalia.com
Cc: mst@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace qemu_allocate_irqs(foo, bar, 1)[0]
with qemu_allocate_irq(foo, bar, 0).
This avoids leaking the dereferenced qemu_irq *.
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
[PC Changes:
* Applied change to instance in sh4/sh7750.c
]
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Kirill Batuzov <batuzovk@ispras.ru>
[AF: Fix IRQ index in sh4/sh7750.c]
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
It does a g_free() on the pointer, so don't pass a local &foo reference.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
Certain parts of the QOM framework test this pointer to determine if
an object is parented. Nuke it when the object is unparented to allow
for reuse of an object after unparenting.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
io-error is for block device errors; it should always be preceded
by a BLOCK_IO_ERROR event. I think vfio wants to use
RUN_STATE_INTERNAL_ERROR instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Slow BAR access path is used when VFIO fails to mmap() BAR.
Since this is just a transport between the guest and a device, there is
no need to do endianness swapping.
This changes BARs to use native endianness. Since non-ROM BARs were
doing byte swapping, we need to remove it so does the patch.
As the result, this eliminates cancelling byte swaps and there is
no change in behavior for non-ROM BARs.
ROM BARs were declared little endian too but byte swapping was not
implemented for them so they never actually worked on big endian systems
as there was no cancelling byte swap. This fixes endiannes for ROM BARs
by declaring them native endian and only fixing access sizes as it is
done for non-ROM BARs.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There are still old guests out there that over-exercise MSI-X masking.
The current code completely sets-up and tears-down an MSI-X vector on
the "use" and "release" callbacks. While this is functional, it can
slow an old guest to a crawl. We can easily skip the KVM parts of
this so that we keep the MSI route and irqfd setup. We do however
need to switch VFIO to trigger a different eventfd while masked.
Actually, we have the option of continuing to use -1 to disable the
trigger, but by using another EventNotifier we can allow the MSI-X
core to emulate pending bits and re-fire the vector once unmasked.
MSI code gets updated as well to use the same setup and teardown
structures and functions.
Prior to this change, an igbvf assigned to a RHEL5 guest gets about
20Mbps and 50 transactions/s with netperf (remote or VF->PF). With
this change, we get line rate and 3k transactions/s remote or 2Gbps
and 6k+ transactions/s to the PF. No significant change is expected
for newer guests with more well behaved MSI-X support.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* remotes/bonzini/nbd-next:
nbd: Handle NBD_OPT_LIST option.
nbd: Handle fixed new-style clients.
nbd: Shutdown socket before closing.
nbd: Don't validate from and len in NBD_CMD_DISC.
nbd: Don't export a block device with no medium.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/small-fixes:
tests/test-qmp-event: fix for GLib < 2.31
serial: poll the serial console with G_IO_HUP
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Honour -show-cursor option
* Fix handling of absolute positioning devices
* Cope with first surface being same as initial window size
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VoHE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-cocoa-20140630' into staging
cocoa.next:
* Honour -show-cursor option
* Fix handling of absolute positioning devices
* Cope with first surface being same as initial window size
# gpg: Signature made Mon 30 Jun 2014 13:48:46 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-cocoa-20140630:
ui/cocoa: Honour -show-cursor command line option
ui/cocoa: Fix handling of absolute positioning devices
ui/cocoa: Add utility method to check if point is within window
ui/cocoa: Cope with first surface being same as initial window size
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* provide PL031 RTC in virt board
* fix missing pxa2xx and strongarm vmstate
* convert cadence_ttc to instance_init
* fix libvixl format strings and README
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=leR3
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20140630' into staging
target-arm:
* provide PL031 RTC in virt board
* fix missing pxa2xx and strongarm vmstate
* convert cadence_ttc to instance_init
* fix libvixl format strings and README
# gpg: Signature made Mon 30 Jun 2014 13:44:33 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140630:
disas/libvixl: Fix wrong format strings
disas/libvixl: Update README for version base
timer: cadence_ttc: Convert to instance_init
hw/arm/pxa2xx_gpio: Correct and register vmstate
hw/arm/pxa2xx_gpio: Fix handling of GPSR/GPCR reads
hw/arm/strongarm: Wire up missing GPIO and PPC vmstate
hw/arm/strongarm: Fix handling of GPSR/GPCR reads
hw/arm/virt: Provide PL031 RTC
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On old GLib, the test needs a g_thread_init call.
Reported-by: Wenchao Xia <wenchaoqemu@gmail.com>
Tested-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On FreeBSD polling a master pty while the other end is not connected
with G_IO_OUT only results in an endless wait. This is different from
the Linux behaviour, that returns immediately. In order to demonstrate
this, I have the following example code:
http://xenbits.xen.org/people/royger/test_poll.c
When executed on Linux:
$ ./test_poll
In callback
On FreeBSD instead, the callback never gets called:
$ ./test_poll
So, in order to workaround this, poll the source with G_IO_HUP (which
makes the code behave the same way on both Linux and FreeBSD).
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: xen-devel@lists.xenproject.org
[Add hw/char/cadence_uart.c too. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When this flag is set, the server tells the client that it can send another
option if the server received a request with an option that it doesn't
understand instead of directly closing the connection.
Also add link to the most up-to-date documentation.
Signed-off-by: Hani Benhabiles <kroosec@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This forces finishing data sending to client before closing the socket like in
exports listing or replying with NBD_REP_ERR_UNSUP cases.
Signed-off-by: Hani Benhabiles <kroosec@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the compiler is told to check the arguments of AppendToOutput,
it reports several errors of this kind:
error: format ‘%d’ expects argument of type ‘int’,
but argument 3 has type ‘int64_t {aka long int}’ [-Werror=format]
Fix those bugs by using the correct format strings with PRId64, PRIx64.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1403113751-19799-1-git-send-email-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Honour the -show-cursor command line option (which forces the mouse pointer
to always be displayed even when input is grabbed) in the Cocoa UI backend.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1403516125-14568-5-git-send-email-peter.maydell@linaro.org
Fix handling of absolute positioning devices, which were basically
unusable for two separate reasons:
(1) as soon as you pressed the left mouse button we would call
CGAssociateMouseAndMouseCursorPosition(FALSE), which means that
the absolute coordinates of the mouse events are never updated
(2) we didn't account for MacOSX coordinate origin being bottom left
rather than top right, and so all the Y values sent to the guest
were inverted
We fix (1) by aligning our behaviour with the SDL UI backend for
absolute devices:
* when the mouse moves into the window we do a grab (which means
hiding the host cursor and sending special keys to the guest)
* when the mouse moves out of the window we un-grab
and fix (2) by doing the correct transformation in the call to
qemu_input_queue_abs().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1403516125-14568-4-git-send-email-peter.maydell@linaro.org
Add a utility method to check whether a point is within the current window
bounds, and use it in the various places in the mouse handling code that
were opencoding the check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1403516125-14568-3-git-send-email-peter.maydell@linaro.org
Do the recalculation of the content dimensions in switchSurface if the
current cdx is zero as well as if the new surface is a different size to
the current window. This catches the case where the first surface registered
happens to be 640x480 (our current window size), and fixes a bug where we
would always display a black screen until the first surface of a different
size was registered.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1403516125-14568-2-git-send-email-peter.maydell@linaro.org
SysBusDevice::init is deprecated. Convert to instance_init
as prescribed by QOM conventions.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1223f14833159b9ea5c57734dd2ffa88d4b15a83.1403583596.git.alistair.francis@xilinx.com
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The pxa2xx-gpio device has a VMStateDescription, but it was accidentally
never actually registered, and it wasn't quite correct. Remove the
'lines' field (this is a device property, not mutable state), add the
missing 'prev_level' field, and set dc->vmsd so it actually gets used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The PXA2xx GPIO GPSR and GPCR registers are write-only, with reads being
undefined behaviour. Instead of having GPCR return 31337 and GPSR return
the value last written, make both log the guest error and return 0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The VMStateDescription structs for the GPIO and PPC devices were
accidentally never wired up. Add missing state fields and register
them via dc->vmsd.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The StrongARM GPIO GPSR and GPCR registers are write-only, with reads being
undefined behaviour. Instead of having GPCR return 31337 and GPSR return
the value last written, make both log the guest error and return 0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
UEFI mandates that the platform must include an RTC, so provide
one in 'virt', using the PL031. This is also useful for directly
booting Linux kernels which would otherwise have to run ntpdate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
virtio bi-endian support
new command to resync RTC
misc bugfixes and cleanups
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTsEGpAAoJECgfDbjSjVRpAEMIALoOOk6KyDZ30tX7iretmXIG
MM8BG8uvox3KdPN/A2VHCVQyM1s8DSsBAoU3hL7sL5zBkPpOYwlOxJA0Bf9aw8+o
2MIgpFr2ifd0ukmDZkBFEwmyo+XMYDXrYiRAlSTYqpEaidRr82mHteR0lblHz4gC
wMjn+MiXaBPkTXqPymKGseIslyNipPLkV4Y5h0ycExLBYK2VwVSG/Jr2d3rp0ZU1
z7MOeME6qw6PdhQBXzX2FyByBY2e2z4/jzbAWP2sPmqb/cwPKeacnTOKip58PWIC
xyHD4XgAp2ZpwKMZkJbNEF1GQPI72duASfFiACkUgfXl7s8BpSm0rrD4auhqLCY=
=aFOP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,vhost,virtio fixes, enhancements
virtio bi-endian support
new command to resync RTC
misc bugfixes and cleanups
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 29 Jun 2014 17:41:13 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (37 commits)
tests: add human format test for string output visitor
vhost-net: disable when cross-endian
target-ppc: enable virtio endian ambivalent support
virtio-9p: use virtio wrappers to access headers
virtio-serial-bus: use virtio wrappers to access headers
virtio-scsi: use virtio wrappers to access headers
virtio-blk: use virtio wrappers to access headers
virtio-balloon: use virtio wrappers to access page frame numbers
virtio-net: use virtio wrappers to access headers
virtio: allow byte swapping for vring
virtio: memory accessors for endian-ambivalent targets
virtio: add endian-ambivalent support to VirtIODevice
cpu: introduce CPUClass::virtio_is_big_endian()
exec: introduce target_words_bigendian() helper
virtio: add subsections to the migration stream
virtio-rng: implement per-device migration calls
virtio-balloon: implement per-device migration calls
virtio-serial: implement per-device migration calls
virtio-blk: implement per-device migration calls
virtio-net: implement per-device migration calls
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As of today, vhost assumes guest and host have the same endianness.
This is definitely not compatible with modern PPC64 and ARM that
can change endianness at runtime. Let's disable vhost-net and print
an error message when we detect such a case:
qemu-system-ppc64: vhost-net does not support cross-endian
qemu-system-ppc64: unable to start vhost net: 38: falling back on userspace virtio
This way users can continue to run VMs without changing their setup and
have a chance to know that performance will be impacted.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The device endianness is the cpu endianness at device reset time.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Note that st*_raw and ld*_raw are effectively replaced by st*_p and ld*_p.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We also fix max_nr_ports at reset time as the device endianness may have
changed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
[ pass VirtIODevice * to memory accessors,
fix max_nr_ports at reset time,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Note that st*_raw and ld*_raw are effectively replaced by st*_p and ld*_p.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
[ pass VirtIODevice * to memory accessors,
converted new tswap locations to virtio_tswap,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Note that st*_raw and ld*_raw are effectively replaced by st*_p and ld*_p.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
[ pass VirtIODevice * to memory accessors,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
[ pass VirtIODevice * to memory accessors,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
[ pass VirtIODevice * to memory accessors,
converted new tswap locations to virtio_tswap,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Quoting original text from Rusty: "This is based on a simpler patch by Anthony
Liguouri".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
[ add VirtIODevice * argument to most helpers,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is the virtio-access.h header file taken from Rusty's "endian-ambivalent
targets using legacy virtio" patch. It introduces helpers that should be used
when accessing vring data or by drivers for data that contains headers.
The virtio config space is also target endian, but the current code already
handles that with the virtio_is_big_endian() helper. There is no obvious
benefit at using the virtio accessors in this case.
Now we have two distinct paths: a fast inline one for fixed endian targets,
and a slow out-of-line one for targets that define the new TARGET_IS_BIENDIAN
macro.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
[ relicensed virtio-access.h to GPLv2+ on Rusty's request,
pass &address_space_memory to physical memory accessors,
per-device endianness,
virtio tswap16 and tswap64 helpers,
faspath for fixed endian targets,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Cc: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some CPU families can dynamically change their endianness. This means we
can have little endian ppc or big endian arm guests for example. This has
an impact on legacy virtio data structures since they are target endian.
We hence introduce a new property to track the endianness of each virtio
device. It is reasonnably assumed that endianness won't change while the
device is in use : we hence capture the device endianness when it gets
reset.
We migrate this property in a subsection, after the device descriptor. This
means the load code must not rely on it until it is restored. As a consequence,
the vring sanity checks had to be moved after the call to vmstate_load_state().
We enforce paranoia by poisoning the property at the begining of virtio_load().
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If we want to support targets that can change endianness (modern PPC and
ARM for the moment), we need to add a per-CPU class method to be called
from the virtio code. The virtio_ prefix in the name is a hint for people
to avoid misusage (aka. anywhere but from the virtio code).
The default behaviour is to return the compile-time default target
endianness.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We currently have a virtio_is_big_endian() helper that provides the target
endianness to the virtio code. As of today, the helper returns a fixed
compile-time value. Of course, this will have to change if we want to
support target endianness changes at run-time.
Let's move the TARGET_WORDS_BIGENDIAN bits out to a new helper and have
virtio_is_big_endian() implemented on top of it.
This patch doesn't change any functionality.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is a need to add some more fields to VirtIODevice that should be
migrated (broken status, endianness). The problem is that we do not
want to break compatibility while adding a new feature... This issue has
been addressed in the generic VMState code with the use of optional
subsections. As a *temporary* alternative to port the whole virtio
migration code to VMState, this patch mimics a similar subsectionning
ability for virtio, using the VMState code.
Since each virtio device is streamed in its own section, the idea is to
stream subsections between the end of the device section and the start
of the next sections. This allows an older QEMU to complain and exit
when fed with subsections:
Unknown savevm section type 5
load of migration failed
Suggested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While we are here, we also check virtio_load() return value.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
