According to pages 9-31 - 9-34 of "SuperSPARC & MultiCache Controller
User's Manual":
1. "A lower priority fault may not overwrite the
MFSR status of a higher priority fault."
2. The MFAR is overwritten according to the policy defined for the MFSR
3. The overwrite bit is asserted if the fault status register (MFSR)
has been written more than once by faults of the same class
4. SuperSPARC will never place instruction fault addresses in the MFAR.
Implementation of points 1-3 allows booting Solaris 2.6 and 2.5.1.
v2: CODING_STYLE fixes
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
- pstate is 32bit variable, no need to pass 64bit value around
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
- this fixes stepping with gdb, where do_unassigned_access
may be called from gdb handler, outside of generated code
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
- extended range of MMU related traps which use MMU global registers,
as listed in Ultrasparc-IIi document
- no visible changes, since emulation do not cause added traps
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The page 108 of the SPARC Version 8 Architecture Manual describes
that addcc and addxcc shall compute carry flag the same way.
The page 110 claims the same about subcc and subxcc instructions.
This patch fixes carry computation in corner cases and removes redundant code.
The most visible effect of the patch is enabling Solaris boot when using OBP.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
[blauwirbel@gmail.com: cleaned up formatting]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix done instruction to resume with pc=tnpc, npc=tnpc+4
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Sparc64 alternate space load/store helpers expect 8 bit ASI value,
while wrasi implementation sign-extends ASI operand causing
for example 0x80 to appear as 0xFFFFFF80. Resulting value falls
out of switch in helpers and causes obscure load/store faults.
- correct wrasi by masking lower 8 bits of xor result
- use lower 8 bits of ASI register in helpers
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
tl and tsptr of members sparc64 cpu state must be changed
simultaneously to keep trap state window in sync with current
trap level. Currently translation of store to tl does not change
tsptr, which leads to corrupt trap state on corresponding
trap level.
This patch removes tsptr from sparc64 cpu state and replaces
all uses with call to helper routine.
Changes v0->v1:
- reimplemented helper routine with tcg generator
- on cpu reset trap type and pstate are populated with power-on reset
values, including tl=maxtl
Signed-off-by: igor.v.kovalenko@gmail.com
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
- implement "used" bit in tlb translation entry
- mark tlb entry used if qemu code/data translation succeeds
- fold i/d mmu replacement writes code into replace_tlb_1bit_lru which
adds 1bit lru replacement algorithm; previously code tried to replace
first unlocked entry only
- extract more bitmasks to named macros
- add "immu" or "dmmu" type name to debugging output where appropriate
Signed-off-by: igor.v.kovalenko@gmail.com
--
Kind regards,
Igor V. Kovalenko
- add names to mmu registers, this helps understanding the code which
uses/modifies them.
- fold i/d mmu tlb entries tag and tte arrays into arrays of tlb entries
- extract demap_tlb routine (code duplication)
- extract replace_tlb routine (code duplication)
- flush qemu tlb translations when replacing sparc64 mmu tlb entries
I have no test case which demands flushing qemu translations,
and this patch should have no other visible changes to runtime.
Signed-off-by: igor.v.kovalenko@gmail.com
--
Kind regards,
Igor V. Kovalenko
I used the following command to enable debugging:
perl -p -i -e 's/^\/\/#define DEBUG/#define DEBUG/g' * */* */*/*
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
On Sun, Jul 12, 2009 at 12:09 PM, Blue Swirl<blauwirbel@gmail.com> wrote:
> On 7/12/09, Igor Kovalenko <igor.v.kovalenko@gmail.com> wrote:
>> Good trap handling is required to process interrupts.
>> This patch fixes the following:
>>
>> - sparc64 has no wim register
>> - sparc64 has no psret register, use IE bit of pstate
>> extract IE checking code to cpu_interrupts_enabled
>> - alternate globals are not available if cpu has GL feature
>> in this case bit AG of pstate is constant zero
>> - write to pstate must actually write pstate
>> even if cpu has GL feature
>>
>> Also timer interrupt is handled using do_interrupt.
>
> A bit too much for one patch. Please also remove the code instead of
> commenting out.
I now excluded timer interrupt related part.
To my mind other changes are essentially tied together.
> PUT_PSR for Sparc64 needs CC_OP = CC_OP_FLAGS; like Sparc32.
Fixed, please find attached the updated version.
--
Kind regards,
Igor V. Kovalenko
On Sun, Jul 12, 2009 at 12:43 AM, Stuart Brady<sdbrady@ntlworld.com> wrote:
> On Sat, Jul 11, 2009 at 10:22:18PM +0400, Igor Kovalenko wrote:
>> It is clear that intention is to byte-swap value to be written, not
>> the target address.
>
> @@ -1949,13 +1949,13 @@ void helper_st_asi(target_ulong addr, ta
> case 0x89: // Secondary LE
> switch(size) {
> case 2:
> - addr = bswap16(addr);
> + addr = bswap16(val);
> ^^^^
> Shouldn't that be 'val = bswap16(val)' (and likewise for the 32-bit and
> 64-bit cases)? Also needs a 'signed-off-by:'...
>
> Cheers,
> --
> Stuart Brady
>
Thanks, that part I did not runtime-tested.
Not sure if those asi stores are of any use for user-mode emulator.
Please find attached the corrected version.
Signed-off-by: igor.v.kovalenko@gmail.com
--
Kind regards,
Igor V. Kovalenko
Posting updated patch to the list...
>>> On Fri, Apr 24, 2009 at 9:42 PM, Blue Swirl <blauwirbel@gmail.com> wrote:
>>> >
>>> > Nice, though I didn't notice any visible improvement in my tests.
>>>
>>> This early in boot process there is not much to output; and I test
>>> recent kernel which may use different startup sequence.
>>> I modified openbios cif handler to output arguments and I now can see
>>> visible difference.
>>>
>>>
>>> >
>>> > About the patch, there are a few problems:
>>> > - it breaks Sparc32
>>>
>>> You mean it stops working?
>>
>> Does not even build.
Fixed now.
>>> > - commented out code is ugly
>>> > - if and else should be on the same line as '{' or '}'
>>> > - long lines should be wrapped
>>> > - in the line:
>>> > + return (((tag_access_register & 0x1fff)<<48)|(tag_access_register >> 22));
>>> > there should be white space between ) and << and 48.
>>> >
>>>
>>
>> Also the ")|(" in between is crowded.
>>
>> Maybe the coding style does not describe this well enough.
BTW Supplying indent template would be great.
Please see the updated patch qemu-sparc64-tsb-asi-2.patch attached.
--
Kind regards,
Igor V. Kovalenko
These are references to 'loglevel' that aren't on a simple 'if (loglevel &
X) qemu_log()' statement.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6340 c046a42c-6fe2-441c-8c8c-71466251a162
This is a large patch that changes all occurrences of logfile/loglevel
global variables to use the new qemu_log*() macros.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6338 c046a42c-6fe2-441c-8c8c-71466251a162
