Swap 'buf' and 'bytes' around for consistency with
blk_co_{pread,pwrite}(), and in preparation to implement these functions
using generated_co_wrapper.
Callers were updated using this Coccinelle script:
@@ expression blk, offset, buf, bytes, flags; @@
- blk_pread(blk, offset, buf, bytes, flags)
+ blk_pread(blk, offset, bytes, buf, flags)
@@ expression blk, offset, buf, bytes, flags; @@
- blk_pwrite(blk, offset, buf, bytes, flags)
+ blk_pwrite(blk, offset, bytes, buf, flags)
It had no effect on hw/block/nand.c, presumably due to the #if, so that
file was updated manually.
Overly-long lines were then fixed by hand.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-4-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
They currently return the value of their 'bytes' parameter on success.
Make them return 0 instead, for consistency with other I/O functions and
in preparation to implement them using generated_co_wrapper. This also
makes it clear that short reads/writes are not possible.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Message-Id: <20220705161527.1054072-2-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
They currently return the value of their 'bytes' parameter on success.
Make them return 0 instead, for consistency with other I/O functions and
in preparation to implement them using generated_co_wrapper. This also
makes it clear that short reads/writes are not possible.
The few callers that rely on the previous behavior are adjusted
accordingly by hand.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220609152744.3891847-4-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Move the various memalign-related functions out of osdep.h and into
their own header, which we include only where they are used.
While we're doing this, add some brief documentation comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220226180723.1706285-10-peter.maydell@linaro.org
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver write handlers parameters which are already 64bit to
signed type.
While being here, convert also flags parameter to be BdrvRequestFlags.
Now let's consider all callers. Simple
git grep '\->bdrv_\(aio\|co\)_pwritev\(_part\)\?'
shows that's there three callers of driver function:
bdrv_driver_pwritev() and bdrv_driver_pwritev_compressed() in
block/io.c, both pass int64_t, checked by bdrv_check_qiov_request() to
be non-negative.
qcow2_save_vmstate() does bdrv_check_qiov_request().
Still, the functions may be called directly, not only by drv->...
Let's check:
git grep '\.bdrv_\(aio\|co\)_pwritev\(_part\)\?\s*=' | \
awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \
while read func; do git grep "$func(" | \
grep -v "$func(BlockDriverState"; done
shows several callers:
qcow2:
qcow2_co_truncate() write at most up to @offset, which is checked in
generic qcow2_co_truncate() by bdrv_check_request().
qcow2_co_pwritev_compressed_task() pass the request (or part of the
request) that already went through normal write path, so it should
be OK
qcow:
qcow_co_pwritev_compressed() pass int64_t, it's updated by this patch
quorum:
quorum_co_pwrite_zeroes() pass int64_t and int - OK
throttle:
throttle_co_pwritev_compressed() pass int64_t, it's updated by this
patch
vmdk:
vmdk_co_pwritev_compressed() pass int64_t, it's updated by this
patch
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver read handlers parameters which are already 64bit to
signed type.
While being here, convert also flags parameter to be BdrvRequestFlags.
Now let's consider all callers. Simple
git grep '\->bdrv_\(aio\|co\)_preadv\(_part\)\?'
shows that's there three callers of driver function:
bdrv_driver_preadv() in block/io.c, passes int64_t, checked by
bdrv_check_qiov_request() to be non-negative.
qcow2_load_vmstate() does bdrv_check_qiov_request().
do_perform_cow_read() has uint64_t argument. And a lot of things in
qcow2 driver are uint64_t, so converting it is big job. But we must
not work with requests that don't satisfy bdrv_check_qiov_request(),
so let's just assert it here.
Still, the functions may be called directly, not only by drv->...
Let's check:
git grep '\.bdrv_\(aio\|co\)_preadv\(_part\)\?\s*=' | \
awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \
while read func; do git grep "$func(" | \
grep -v "$func(BlockDriverState"; done
The only one such caller:
QEMUIOVector qiov = QEMU_IOVEC_INIT_BUF(qiov, &data, 1);
...
ret = bdrv_replace_test_co_preadv(bs, 0, 1, &qiov, 0);
in tests/unit/test-bdrv-drain.c, and it's OK obviously.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix typos]
Signed-off-by: Eric Blake <eblake@redhat.com>
Introduced by d85f4222b4,
These were seemingly never used at all.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20200806211345.2925343-3-jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
qcow has no space in the metadata to store a backing format, and there
are existing qcow images backed both by raw or by other formats
(usually qcow) images, reliant on probing to tell the difference. On
the bright side, because we probe every time, raw files are marked as
probed and we thus forbid a commit action into the backing file where
guest-controlled contents could change the result of the probe next
time around (the iotest added here proves that).
Still, allowing the user to specify the backing format during
creation, even if we can't record it, is a good thing. This patch
blindly allows any value that resolves to a known driver, even if the
user's request is a mismatch from what probing finds; then the next
patch will further enhance things to verify that the user's request
matches what we actually probe. With this and the next patch in
place, we will finally be ready to deprecate the creation of images
where a backing format was not explicitly specified by the user.
Note that this is only for QemuOpts usage; there is no change to the
QAPI to allow a format through -blockdev.
Add a new iotest 301 just for qcow, to demonstrate the latest
behavior, and to make it easier to show the improvements made in the
next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-6-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When migrate_add_blocker(blocker, &errp) is followed by
error_propagate(errp, err), we can often just as well do
migrate_add_blocker(..., errp).
Do that with this Coccinelle script:
@@
expression blocker, err, errp;
expression ret;
@@
- ret = migrate_add_blocker(blocker, &err);
- if (err) {
+ ret = migrate_add_blocker(blocker, errp);
+ if (ret < 0) {
... when != err;
- error_propagate(errp, err);
...
}
@@
expression blocker, err, errp;
@@
- migrate_add_blocker(blocker, &err);
- if (err) {
+ if (migrate_add_blocker(blocker, errp) < 0) {
... when != err;
- error_propagate(errp, err);
...
}
Double-check @err is not used afterwards. Dereferencing it would be
use after free, but checking whether it's null would be legitimate.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-43-armbru@redhat.com>
Convert
visit_type_FOO(v, ..., &ptr, &err);
...
if (err) {
...
}
to
visit_type_FOO(v, ..., &ptr, errp);
...
if (!ptr) {
...
}
for functions that set @ptr to non-null / null on success / error.
Eliminate error_propagate() that are now unnecessary. Delete @err
that are now unused.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-40-armbru@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. Convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
return ...
}
to
if (!foo(..., errp)) {
...
...
return ...
}
where nothing else needs @err. Coccinelle script:
@rule1 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
binary operator op;
constant c1, c2;
symbol false;
@@
if (
(
- fun(args, &err, args2)
+ fun(args, errp, args2)
|
- !fun(args, &err, args2)
+ !fun(args, errp, args2)
|
- fun(args, &err, args2) op c1
+ fun(args, errp, args2) op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
)
}
@rule2 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
expression var;
binary operator op;
constant c1, c2;
symbol false;
@@
- var = fun(args, &err, args2);
+ var = fun(args, errp, args2);
... when != err
if (
(
var
|
!var
|
var op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
|
return var;
)
}
@depends on rule1 || rule2@
identifier err;
@@
- Error *err = NULL;
... when != err
Not exactly elegant, I'm afraid.
The "when != lbl:" is necessary to avoid transforming
if (fun(args, &err)) {
goto out
}
...
out:
error_propagate(errp, err);
even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().
Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly. I don't know what exactly "when strict" does, only that
it helps here.
The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err". For
an example where it's too narrow, see vfio_intx_enable().
Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there. Converted manually.
Line breaks tidied up manually. One nested declaration of @local_err
deleted manually. Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
bdrv_default_perms() can decide which permission profile to use based on
the BdrvChildRole, so block drivers do not need to select it explicitly.
The blkverify driver now no longer shares the WRITE permission for the
image to verify. We thus have to adjust two places in
test-block-iothread not to take it. (Note that in theory, blkverify
should behave like quorum in this regard and share neither WRITE nor
RESIZE for both of its children. In practice, it does not really
matter, because blkverify is used only for debugging, so we might as
well keep its permissions rather liberal.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-30-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commonly, they need to pass the BDRV_CHILD_IMAGE set as the
BdrvChildRole; but there are exceptions for drivers with external data
files (qcow2 and vmdk).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-26-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now, it is always set to 0. Later patches in this series will
ensure that all callers pass an appropriate combination of flags.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-6-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to unify child_format and child_file at some point. One of the
important things that set format drivers apart from other drivers is
that they do not expect other format nodes under them (except in the
backing chain), i.e. we must not probe formats inside of formats. That
means we need something on which to distinguish format drivers from
others, and hence this flag.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200513110544.176672-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are several callers that need to create a new block backend from
an existing BDS; make the task slightly easier with a common helper
routine.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424190903.522087-2-eblake@redhat.com>
[mreitz: Set @ret only in error paths, see
https://lists.nongnu.org/archive/html/qemu-block/2020-04/msg01216.html]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200428192648.749066-2-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that block drivers can support flags for .bdrv_co_truncate, expose
the parameter in the node level interfaces bdrv_co_truncate() and
bdrv_truncate().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This will allow the reuse of a single generic .bdrv_co_create
implementation for several drivers.
No functional changes.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200326011218.29230-2-mlevitsk@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We have two drivers (iscsi and file-posix) that (in some cases) return
success from their .bdrv_co_truncate() implementation if the block
device is larger than the requested offset, but cannot be shrunk. Some
callers do not want that behavior, so this patch adds a new parameter
that they can use to turn off that behavior.
This patch just adds the parameter and lets the block/io.c and
block/block-backend.c functions pass it around. All other callers
always pass false and none of the implementations evaluate it, so that
this patch does not change existing behavior. Future patches take care
of that.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190918095144.955-5-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
There is no reason why the format drivers need to truncate the protocol
node when formatting it. When using the old .bdrv_co_create_ops()
interface, the file will be created with no size option anyway, which
generally gives it a size of 0. (Exceptions are block devices, which
cannot be truncated anyway.)
When using blockdev-create, the user must have given the file node some
size anyway, so there is no reason why we should override that.
qed is an exception, it needs the file to start completely empty (as
explained by c743849bee).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190918095144.955-4-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reported-by: radmehrsaeed7@gmail.com
Fixes: https://bugs.launchpad.net/bugs/1832914
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a new parameter to blk_new() which requires its callers to
declare from which AioContext this BlockBackend is going to be used (or
the locks of which AioContext need to be taken anyway).
The given context is only stored and kept up to date when changing
AioContexts. Actually applying the stored AioContext to the root node
is saved for another commit.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- Block graph change fixes (avoid loops, cope with non-tree graphs)
- bdrv_set_aio_context() related fixes
- HMP snapshot commands: Use only tag, not the ID to identify snapshots
- qmeu-img, commit: Error path fixes
- block/nvme: Build fix for gcc 9
- MAINTAINERS updates
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qemu-img measure for qcow2
- A fix for vmdk's image creation interface
-----BEGIN PGP SIGNATURE-----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=gaah
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Block graph change fixes (avoid loops, cope with non-tree graphs)
- bdrv_set_aio_context() related fixes
- HMP snapshot commands: Use only tag, not the ID to identify snapshots
- qmeu-img, commit: Error path fixes
- block/nvme: Build fix for gcc 9
- MAINTAINERS updates
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qemu-img measure for qcow2
- A fix for vmdk's image creation interface
# gpg: Signature made Mon 25 Feb 2019 14:18:15 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (71 commits)
iotests: Skip 211 on insufficient memory
vmdk: false positive of compat6 with hwversion not set
iotests: add LUKS payload overhead to 178 qemu-img measure test
qcow2: include LUKS payload overhead in qemu-img measure
iotests.py: s/_/-/g on keys in qmp_log()
iotests: Let 045 be run concurrently
iotests: Filter SSH paths
iotests.py: Filter filename in any string value
iotests.py: Add is_str()
iotests: Fix 207 to use QMP filters for qmp_log
iotests: Fix 232 for LUKS
iotests: Remove superfluous rm from 232
iotests: Fix 237 for Python 2.x
iotests: Re-add filename filters
iotests: Test json:{} filenames of internal BDSs
block: BDS options may lack the "driver" option
block/null: Generate filename even with latency-ns
block/curl: Implement bdrv_refresh_filename()
block/curl: Harmonize option defaults
block/nvme: Fix bdrv_refresh_filename()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This new field can be set by block drivers to list the runtime options
they accept that may influence the contents of the respective BDS. As of
a follow-up patch, this list will be used by the common
bdrv_refresh_filename() implementation to decide which options to put
into BDS.full_open_options (and consequently whether a JSON filename has
to be created), thus freeing the drivers of having to implement that
logic themselves.
Additionally, this patch adds the field to all of the block drivers that
need it and sets it accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-22-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
If the backing file is overridden, this most probably does change the
guest-visible data of a BDS. Therefore, we will need to consider this
in bdrv_refresh_filename().
To see whether it has been overridden, we might want to compare
bs->backing_file and bs->backing->bs->filename. However,
bs->backing_file is changed by bdrv_set_backing_hd() (which is just used
to change the backing child at runtime, without modifying the image
header), so bs->backing_file most of the time simply contains a copy of
bs->backing->bs->filename anyway, so it is useless for such a
comparison.
This patch adds an auto_backing_file BDS field which contains the
backing file path as indicated by the image header, which is not changed
by bdrv_set_backing_hd().
Because of bdrv_refresh_filename() magic, however, a BDS's filename may
differ from what has been specified during bdrv_open(). Then, the
comparison between bs->auto_backing_file and bs->backing->bs->filename
may fail even though bs->backing was opened from bs->auto_backing_file.
To mitigate this, we can copy the real BDS's filename (after the whole
bdrv_open() and bdrv_refresh_filename() process) into
bs->auto_backing_file, if we know the former has been opened based on
the latter. This is only possible if no options modifying the backing
file's behavior have been specified, though. To simplify things, this
patch only copies the filename from the backing file if no options have
been specified for it at all.
Furthermore, there are cases where an overlay is created by qemu which
already contains a BDS's filename (e.g. in blockdev-snapshot-sync). We
do not need to worry about updating the overlay's bs->auto_backing_file
there, because we actually wrote a post-bdrv_refresh_filename() filename
into the image header.
So all in all, there will be false negatives where (as of a future
patch) bdrv_refresh_filename() will assume that the backing file differs
from what was specified in the image header, even though it really does
not. However, these cases should be limited to where (1) the user
actually did override something in the backing chain (e.g. by specifying
options for the backing file), or (2) the user executed a QMP command to
change some node's backing file (e.g. change-backing-file or
block-commit with @backing-file given) where the given filename does not
happen to coincide with qemu's idea of the backing BDS's filename.
Then again, (1) really is limited to -drive. With -blockdev or
blockdev-add, you have to adhere to the schema, so a user cannot give
partial "unimportant" options (e.g. by just setting backing.node-name
and leaving the rest to the image header). Therefore, trying to fix
this would mean trying to fix something for -drive only.
To improve on (2), we would need a full infrastructure to "canonicalize"
an arbitrary filename (+ options), so it can be compared against
another. That seems a bit over the top, considering that filenames
nowadays are there mostly for the user's entertainment.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Use new qemu_iovec_init_buf() instead of
qemu_iovec_init_external( ... , 1), which simplifies the code.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190218140926.333779-9-vsementsov@virtuozzo.com
Message-Id: <20190218140926.333779-9-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The two thing that should be handled are cipher and ivgen. For ivgen
the solution is just mutex, as iv calculations should not be long in
comparison with encryption/decryption. And for cipher let's just keep
per-thread ciphers.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Taking the address of a field in a packed struct is a bad idea, because
it might not be actually aligned enough for that pointer type (and
thus cause a crash on dereference on some host architectures). Newer
versions of clang warn about this. Avoid the bug by not using the
"modify in place" byte swapping functions.
There are a few places where the in-place swap function is
used on something other than a packed struct field; we convert
those anyway, for consistency.
This patch was produced with the following spatch script:
@@
expression E;
@@
-be16_to_cpus(&E);
+E = be16_to_cpu(E);
@@
expression E;
@@
-be32_to_cpus(&E);
+E = be32_to_cpu(E);
@@
expression E;
@@
-be64_to_cpus(&E);
+E = be64_to_cpu(E);
@@
expression E;
@@
-cpu_to_be16s(&E);
+E = cpu_to_be16(E);
@@
expression E;
@@
-cpu_to_be32s(&E);
+E = cpu_to_be32(E);
@@
expression E;
@@
-cpu_to_be64s(&E);
+E = cpu_to_be64(E);
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since 42a3e1ab36 qemu asserts when using the
vvfat driver:
git clone git://qemu.org/qemu.git
cd qemu
./configure --target-list=ppc-softmmu --enable-debug
make -j8
mkdir foo
touch foo/hello
./ppc-softmmu/qemu-system-ppc -M prep --nographic --monitor null \
-hda fat:rw:./foo
"Ctrl-C"
qemu-system-ppc: block.c:3368: bdrv_close_all: Assertion \
`((&all_bdrv_states)->tqh_first == ((void *)0))' failed.
This is because we reference bs twice in qcow_co_create(..) one time in
bdrv_open_blockdev_ref(..) and in blk_insert_bs(..) but we unref it only once
in blk_unref which leads to the reference leak.
Note that I didn't tested much QCOW after this change as I don't use it much.
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. The qcow driver is now ready to fully utilize the
byte-based callback interface, as long as we override the default
alignment to still be 512 (needed at least for asserts present
because of encryption, but easier to do everywhere than to audit
which sub-sector requests are handled correctly, especially since
we no longer recommend qcow for new disk images).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Make the change for the internals of the qcow
driver write function, by iterating over offset/bytes instead of
sector_num/nb_sectors, and with a rename of index_in_cluster and
repurposing of n to track bytes instead of sectors.
A later patch will then switch the qcow driver as a whole over
to byte-based operation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Make the change for the internals of the qcow
driver read function, by iterating over offset/bytes instead of
sector_num/nb_sectors, and with a rename of index_in_cluster and
repurposing of n to track bytes instead of sectors.
A later patch will then switch the qcow driver as a whole over
to byte-based operation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Make the change for the internal helper function
get_cluster_offset(), by changing n_start and n_end to be byte
offsets rather than sector indices within the cluster being
allocated. However, assert that these values are still
sector-aligned (at least qcrypto_block_encrypt() still wants that).
For now we get that alignment for free because we still use
sector-based driver callbacks.
A later patch will then switch the qcow driver as a whole over
to byte-based operation; but will still leave things at sector
alignments as it is not worth auditing the qcow image format
to worry about sub-sector requests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block_crypto_open_opts_init() and block_crypto_create_opts_init()
contain a virtual visit of QCryptoBlockOptions and
QCryptoBlockCreateOptions less member "format", respectively.
Change their callers to put member "format" in the QDict, so they can
use the generated visitors for these types instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The following pattern occurs in the .bdrv_co_create_opts() methods of
parallels, qcow, qcow2, qed, vhdx and vpc:
qobj = qdict_crumple_for_keyval_qiv(qdict, errp);
qobject_unref(qdict);
qdict = qobject_to(QDict, qobj);
if (qdict == NULL) {
ret = -EINVAL;
goto done;
}
v = qobject_input_visitor_new_keyval(QOBJECT(qdict));
[...]
ret = 0;
done:
qobject_unref(qdict);
[...]
return ret;
If qobject_to() fails, we return failure without setting errp. That's
wrong. As far as I can tell, it cannot fail here. Clean it up
anyway, by removing the useless conversion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Configuration flows through the block subsystem in a rather peculiar
way. Configuration made with -drive enters it as QemuOpts.
Configuration made with -blockdev / blockdev-add enters it as QAPI
type BlockdevOptions. The block subsystem uses QDict, QemuOpts and
QAPI types internally. The precise flow is next to impossible to
explain (I tried for this commit message, but gave up after wasting
several hours). What I can explain is a flaw in the BlockDriver
interface that leads to this bug:
$ qemu-system-x86_64 -blockdev node-name=n1,driver=nfs,server.type=inet,server.host=localhost,path=/foo/bar,user=1234
qemu-system-x86_64: -blockdev node-name=n1,driver=nfs,server.type=inet,server.host=localhost,path=/foo/bar,user=1234: Internal error: parameter user invalid
QMP blockdev-add is broken the same way.
Here's what happens. The block layer passes configuration represented
as flat QDict (with dotted keys) to BlockDriver methods
.bdrv_file_open(). The QDict's members are typed according to the
QAPI schema.
nfs_file_open() converts it to QAPI type BlockdevOptionsNfs, with
qdict_crumple() and a qobject input visitor.
This visitor comes in two flavors. The plain flavor requires scalars
to be typed according to the QAPI schema. That's the case here. The
keyval flavor requires string scalars. That's not the case here.
nfs_file_open() uses the latter, and promptly falls apart for members
@user, @group, @tcp-syn-count, @readahead-size, @page-cache-size,
@debug.
Switching to the plain flavor would fix -blockdev, but break -drive,
because there the scalars arrive in nfs_file_open() as strings.
The proper fix would be to replace the QDict by QAPI type
BlockdevOptions in the BlockDriver interface. Sadly, that's beyond my
reach right now.
Next best would be to fix the block layer to always pass correctly
typed QDicts to the BlockDriver methods. Also beyond my reach.
What I can do is throw another hack onto the pile: have
nfs_file_open() convert all members to string, so use of the keyval
flavor actually works, by replacing qdict_crumple() by new function
qdict_crumple_for_keyval_qiv().
The pattern "pass result of qdict_crumple() to
qobject_input_visitor_new_keyval()" occurs several times more:
* qemu_rbd_open()
Same issue as nfs_file_open(), but since BlockdevOptionsRbd has only
string members, its only a latent bug. Fix it anyway.
* parallels_co_create_opts(), qcow_co_create_opts(),
qcow2_co_create_opts(), bdrv_qed_co_create_opts(),
sd_co_create_opts(), vhdx_co_create_opts(), vpc_co_create_opts()
These work, because they create the QDict with
qemu_opts_to_qdict_filtered(), which creates only string scalars.
The function sports a TODO comment asking for better typing; that's
going to be fun. Use qdict_crumple_for_keyval_qiv() to be safe.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are numerous QDict functions that have been introduced for and are
used only by the block layer. Move their declarations into an own
header file to reflect that.
While qdict_extract_subqdict() is in fact used outside of the block
layer (in util/qemu-config.c), it is still a function related very
closely to how the block layer works with nested QDicts, namely by
sometimes flattening them. Therefore, its declaration is put into this
header as well and util/qemu-config.c includes it with a comment stating
exactly which function it needs.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20180509165530.29561-7-mreitz@redhat.com>
[Copyright note tweaked, superfluous includes dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We have too many driver callback interfaces; simplify the mess
somewhat by merging the flags parameter of .bdrv_co_writev_flags()
into .bdrv_co_writev(). Note that as long as a driver doesn't set
.supported_write_flags, the flags argument will be 0 and behavior is
identical. Also note that the public function bdrv_co_writev() still
lacks a flags argument; so the driver signature is thus intentionally
slightly different. But that's not the end of the world, nor the first
time that the driver interface differs slightly from the public
interface.
Ideally, we should be rewriting all of these drivers to use modern
byte-based interfaces. But that's a more invasive patch to write
and audit, compared to the simplification done here.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This patch was generated using the following Coccinelle script:
@@
expression Obj;
@@
(
- qobject_to_qnum(Obj)
+ qobject_to(QNum, Obj)
|
- qobject_to_qstring(Obj)
+ qobject_to(QString, Obj)
|
- qobject_to_qdict(Obj)
+ qobject_to(QDict, Obj)
|
- qobject_to_qlist(Obj)
+ qobject_to(QList, Obj)
|
- qobject_to_qbool(Obj)
+ qobject_to(QBool, Obj)
)
and a bit of manual fix-up for overly long lines and three places in
tests/check-qjson.c that Coccinelle did not find.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: swap order from qobject_to(o, X), rebase to master, also a fix
to latent false-positive compiler complaint about hw/i386/acpi-build.c]
Signed-off-by: Eric Blake <eblake@redhat.com>
This adds the .bdrv_co_create driver callback to qcow, which
enables image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
BlockDriver->bdrv_create() has been called from coroutine context since
commit 5b7e1542cf ("block: make
bdrv_create adopt coroutine").
Make this explicit by renaming to .bdrv_co_create_opts() and add the
coroutine_fn annotation. This makes it obvious to block driver authors
that they may yield, use CoMutex, or other coroutine_fn APIs.
bdrv_co_create is reserved for the QAPI-based version that Kevin is
working on.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170705102231.20711-2-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the qcow driver accordingly. There is no
intent to optimize based on the want_zero flag for this format.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
