Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-22-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since the prctl constants are supposed to be generic, supply
any that are not provided by the host.
Split out subroutines for PR_GET_FP_MODE, PR_SET_FP_MODE,
PR_GET_VL, PR_SET_VL, PR_RESET_KEYS, PR_SET_TAGGED_ADDR_CTRL,
PR_GET_TAGGED_ADDR_CTRL. Return EINVAL for guests that do
not support these options rather than pass them on to the host.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211227150127.2659293-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
TARGET_MINSIGSTKSZ has been defined in generic/signal.h
or target_signal.h, We don't need to define it again.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1637893388-10282-3-git-send-email-gaosong@loongson.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This value is fully internal to qemu, and so is not a TARGET define.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This value is fully internal to qemu, and so is not a TARGET define.
We use this as an extra marker for both host and target errno.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the masking of the address from cpu_loop into
s390_cpu_record_sigsegv -- this is governed by hw, not linux.
This does mean we have to raise our own exception, rather
than return to the fallback.
Use maperr to choose between PGM_PROTECTION and PGM_ADDRESSING.
Use the appropriate si_code for each in cpu_loop.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create and record the two signal trampolines.
Use them when the guest does not use SA_RESTORER.
Cc: qemu-s390x@nongnu.org
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-22-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
qemu.h is included in various non-linux-user files (which
mostly want the TaskState struct and the functions for
doing usermode access to guest addresses like lock_user(),
unlock_user(), get_user*(), etc).
Split out the parts that are only used in linux-user itself
into a new user-internals.h. This leaves qemu.h with basically
three things:
* the definition of the TaskState struct
* the user-access functions and macros
* do_brk()
all of which are needed by code outside linux-user that
includes qemu.h.
The addition of all the extra #include lines was done with
sed -i '/include.*qemu\.h/a #include "user-internals.h"' $(git grep -l 'include.*qemu\.h' linux-user)
(and then undoing the change to fpa11.h).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-8-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Split the signal related prototypes into the existing header file
signal-common.h, and include it in those places that now require it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-4-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Currently when a compare-and-trap instruction is executed, qemu will
always raise a SIGILL signal. On real hardware, a SIGFPE is raised.
Change the PGM_DATA case in cpu_loop to follow the behavior in
linux kernel /arch/s390/kernel/traps.c.
* Only raise SIGILL if DXC == 0
* If DXC matches a non-simulated IEEE exception, raise SIGFPE with
correct si_code
* Raise SIGFPE with si_code == 0 for everything else
When applied on 20210705210434.45824-2-iii@linux.ibm.com, this fixes
crashes in the java jdk such as the linked bug.
Signed-off-by: Jonathan Albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Buglink: https://bugs.launchpad.net/qemu/+bug/1920913
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/319
Message-Id: <20210709160459.4962-2-jonathan.albrecht@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For SIGILL, SIGFPE and SIGTRAP the PSW must point after the
instruction, and at the instruction for other signals. Currently under
qemu-user for SIGFILL and SIGFPE it points at the instruction.
Fix by advancing psw.addr for these signals.
Co-developed-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/319
Message-Id: <20210705210434.45824-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We want to access the target errno indepently of the rest of the
linux-user code. Move the header containing the generic errno
definitions ('errno_defs.h') to 'generic/target_errno_defs.h',
create a new 'target_errno_defs.h' in each target which itself
includes 'generic/target_errno_defs.h'.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210708170550.1846343-4-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
At present, we're referencing env->psw.mask directly, which
fails to ensure that env->cc_op is incorporated or updated.
Use s390_cpu_{set_psw,get_psw_mask} to fix this.
Mirror the kernel's cleaning of the psw.mask in save_sigregs
and restore_sigregs. Ignore PSW_MASK_RI for now, as qemu does
not support that.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: jonathan.albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Tested-by: <ruixin.bao@ibm.com>
Message-Id: <20210615030744.1252385-6-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reorder the function bodies to correspond to the kernel source.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-15-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
At point of usage, it's not immediately obvious that
we don't need a loop to copy these arrays.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-14-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The original value of frame_addr is still required for
its use in the call to unlock_user_struct below.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-13-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In order to properly present these arguments, we need to add
code to target/s390x to record LowCore parameters for user-only.
But in the meantime, at least zero the missing last_break
argument, and fixup the comment style in the vicinity.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-12-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Note that PSW_ADDR_{64,32} are called PSW_MASK_{EA,BA}
in the kernel source.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The "save" routines copied from the kernel, which are currently
commented out, are unnecessary in qemu. We can copy from env
where the kernel needs special instructions. Fix comment style.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-9-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Using the host address of &frame->sregs is incorrect.
We need the guest address.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Directly reading sc->regs.psw.addr misses the bswap
that may be performed by __get_user.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The function cannot fail.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is an unnecessary complication since we only
support 64-bit mode.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Using the right type simplifies the frame setup.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Noticed via gitlab clang-user job:
TEST signals on s390x
../linux-user/s390x/signal.c:258:9: runtime error: \
1.84467e+19 is outside the range of representable values of \
type 'unsigned long'
Which points to the fact that we were performing a double-to-uint64_t
conversion while storing the fp registers, instead of just copying
the data across.
Turns out there are several errors:
target_ulong is the size of the target register, whereas abi_ulong
is the target 'unsigned long' type. Not a big deal here, since we
only support 64-bit s390x, but not correct either.
In target_sigcontext and target ucontext, we used a host pointer
instead of a target pointer, aka abi_ulong.
Fixing this allows the removal of a cast to __put_user.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210428193408.233706-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In most cases we were already passing get_sp_from_cpustate
directly to the function. In other cases, we were passing
a local variable which already contained the same value.
In the rest of the cases, we were passing the stack pointer
out of env directly.
Reviewed by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Note that target_restore_altstack uses the host memory
pointer that we have already verified, so TARGET_EFAULT
is not a possible return value.
Note that using -EFAULT was a bug.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When setting up the pointer for the sigreturn stub in the return
address register (r14) we currently use the host frame address instead
of the guest frame address.
Note: This only caused problems if Qemu has been built with
--disable-pie (as it is in distros nowadays). Otherwise guest_base
defaults to 0 hiding the actual problem.
Signed-off-by: Andreas Krebbel <krebbel@linux.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210324185128.63971-1-krebbel@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023122455.19417-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some platforms used the wrong definition of stack_t where the flags and
size fields were swapped or where the flags field had type ulong instead
of int.
Due to the presence of padding space in the structure and the prevalence
of little-endian machines this problem went unnoticed for a long time.
The type definitions have been cross-checked with the ones defined in
the Linux kernel v5.9, plus some older versions for a few architecture
that have been removed and Xilinx's kernel fork for NiosII [1].
The bsd-user headers remain unchanged as I don't know if they are wrong
or not.
[1] https://github.com/Xilinx/linux-xlnx/blob/master/arch/nios2/include/uapi/asm/signal.h
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <e9d47692-ee92-009f-6007-0abc3f502b97@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch introduces a generic 'termbits.h' file for following
archs: 'aarch64', 'arm', 'i386, 'm68k', 'microblaze', 'nios2',
'openrisc', 'riscv', 's390x', 'x86_64'.
Since all of these archs have the same termios flag values and
same ioctl_tty numbers, there is no need for a separate 'termbits.h'
file for each one of them. For that reason one generic 'termbits.h'
file was added for all of them and an '#include' directive was
added for this generic file in every arch 'termbits.h' file.
Also, some of the flag values that were missing were added in this
generic file so that it matches the generic 'termibts.h' and 'ioctls.h'
files from the kernel: 'asm-generic/termbits.h' and 'asm-generic/ioctls.h'.
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200723210233.349690-2-Filip.Bozuta@syrmia.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch implements strace argument printing functionality for following syscalls:
* mlock, munlock, mlockall, munlockall - lock and unlock memory
int mlock(const void *addr, size_t len)
int munlock(const void *addr, size_t len)
int mlockall(int flags)
int munlockall(void)
man page: https://man7.org/linux/man-pages/man2/mlock.2.html
Implementation notes:
Syscall mlockall() takes an argument that is composed of predefined values
which represent flags that determine the type of locking operation that is
to be performed. For that reason, a printing function "print_mlockall" was
stated in file "strace.list". This printing function uses an already existing
function "print_flags()" to print the "flags" argument. These flags are stated
inside an array "mlockall_flags" that contains values of type "struct flags".
These values are instantiated using an existing macro "FLAG_TARGET()" that
crates aproppriate target flag values based on those defined in files
'/target_syscall.h'. These target flag values were changed from
"TARGET_MLOCKALL_MCL*" to "TARGET_MCL_*" so that they can be aproppriately set
and recognised in "strace.c" with "FLAG_TARGET()". Value for "MCL_ONFAULT"
was added in this patch. This value was also added in "syscall.c" in function
"target_to_host_mlockall_arg()". Because this flag value was added in kernel
version 4.4, it is enwrapped in an #ifdef directive (both in "syscall.c" and
in "strace.c") as to support older kernel versions.
The other syscalls have only primitive argument types, so the
rest of the implementation was handled by stating an appropriate
printing format in file "strace.list". Syscall mlock2() is not implemented in
"syscall.c" and thus it's argument printing is not implemented in this patch.
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200811164553.27713-4-Filip.Bozuta@syrmia.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The most interesting or most complicated part here is the syscall_nr.h
generators. In order to keep the generation logic all in meson.build,
I am adding to config_target the name of the .tbl file, and making the
generated file syscall<SUFFIX>_nr.h for input file syscall<SUFFIX>.tbl.
For architectures where the input file is not named syscall_nr.tbl,
syscall_nr.h has to be a source file; it's just a forwarder for x86
(i386/x86_64), while for MIPS64 it chooses between N32 and N64 ABIs.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Run scripts/update-syscalltbl.sh with linux commit 0bf999f9c5e7
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-20-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We don't support other 32bit architecture.
Update file to comply with coding style (TAB).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-11-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We will need a target-specific hook for adjusting registers
in the parent during clone. Add an empty inline function for
each target, and invoke it from the proper places.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191106113318.10226-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We will need a target-specific hook for adjusting registers
in the parent during clone. To avoid confusion, rename the
one we have to make it clear it affects the child.
At the same time, pass in the flags from the clone syscall.
We will need them for correct behaviour for Sparc.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191106113318.10226-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Cleanup in the boilerplate that each target must define.
Replace s390_env_get_cpu with env_archcpu. The combination
CPU(s390_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
CPU_DoubleU is primarily used to reinterpret between integer and floats.
We don't really need this functionality. So let's just keep it simple
and use an uint64_t.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
