Upgrade OpenSBI from v1.2 to v1.3 and the pre-built bios images.
The v1.3 release includes the following commits:
440fa81 treewide: Replace TRUE/FALSE with true/false
6509127 Makefile: Remove -N ldflag to prevent linker RWX warning
65638f8 lib: utils/sys: Allow custom HTIF base address for RV32
f14595a lib: sbi: Allow platform to influence cold boot HART selection
6957ae0 platform: generic: Allow platform_override to select cold boot HART
cb7e7c3 platform: generic: Allow platform_override to perform firmware init
8020df8 generic/starfive: Add Starfive JH7110 platform implementation
6997552 lib: sbi_hsm: Rename 'priv' argument to 'arg1'
9e397e3 docs: domain_support: Use capital letter for privilege modes
9e0ba09 include: sbi: Fine grain the permissions for M and SU modes
aace1e1 lib: sbi: Use finer permission semantics for address validation
22dbdb3 lib: sbi: Add permissions for the firmware start till end
1ac14f1 lib: sbi: Use finer permission sematics to decide on PMP bits
44f736c lib: sbi: Modify the boot time region flag prints
20646e0 lib: utils: Use SU-{R/W/X} flags for region permissions during parsing
3e2f573 lib: utils: Disallow non-root domains from adding M-mode regions
59a08cd lib: utils: Add M-mode {R/W} flags to the MMIO regions
001106d docs: Update domain's region permissions and requirements
da5594b platform: generic: allwinner: Fix PLIC array bounds
ce2a834 docs: generic.md: fix typo of andes-ae350
8ecbe6d lib: sbi_hsm: handle failure when hart_stop returns SBI_ENOTSUPP
b1818ee include: types: add always inline compiler attribute
9c4eb35 lib: utils: atcsmu: Add Andes System Management Unit support
787296a platform: andes/ae350: Implement hart hotplug using HSM extension
7aaeeab lib: reset/fdt_reset_atcwdt200: Use defined macros and function in atcsmu.h
a990309 lib: utils: Fix reserved memory node for firmware memory
fefa548 firmware: Split RO/RX and RW sections
2f40a99 firmware: Move dynsym and reladyn sections to RX section
c10e3fe firmware: Add RW section offset in scratch
b666760 lib: sbi: Print the RW section offset
230278d lib: sbi: Add separate entries for firmware RX and RW regions
dea0922 platform: renesas/rzfive: Configure Local memory regions as part of root domain
33bf917 lib: utils: Add fdt_add_cpu_idle_states() helper function
c45992c platform: generic: allwinner: Advertise nonretentive suspend
c8ea836 firmware: Fix fw_rw_offset computation in fw_base.S
8050081 firmware: Not to clear all the MIP
84d15f4 lib: sbi_hsm: Use csr_set to restore the MIP
199189b lib: utils: Mark only the largest region as reserved in FDT
66b0e23 lib: sbi: Ensure domidx_to_domain_table is null-terminated
642f3de Makefile: Add missing .dep files for fw_*.elf.ld
09b34d8 include: Add support for byteorder/endianness conversion
680bea0 lib: utils/fdt: Use byteorder conversion functions in libfdt_env.h
b224ddb include: types: Add typedefs for endianness
aa5dafc include: sbi: Fix BSWAPx() macros for big-endian host
e3bf1af include: Add defines for SBI debug console extension
0ee3a86 lib: sbi: Add sbi_nputs() function
4e0572f lib: sbi: Add sbi_ngets() function
eab48c3 lib: sbi: Add sbi_domain_check_addr_range() function
5a41a38 lib: sbi: Implement SBI debug console extension
c43903c lib: sbi: Add console_puts() callback in the console device
29285ae lib: utils/serial: Implement console_puts() for semihosting
65c2190 lib: sbi: Speed-up sbi_printf() and friends using nputs()
321293c lib: utils/fdt: Fix fdt_pmu.c header dependency
aafcc90 platform: generic/allwinner: Fix sun20i-d1.c header dependency
745aaec platform: generic/andes: Fix ae350.c header dependency
99d09b6 include: fdt/fdt_helper: Change fdt_get_address() to return root.next_arg1
6861ee9 lib: utils: fdt_fixup: Fix compile error
4f2be40 docs: fix typo in fw.md
30ea806 lib: sbi_hart: Enable hcontext and scontext
81adc62 lib: sbi: Align SBI vendor extension id with mvendorid CSR
31b82e0 include: sbi: Remove extid parameter from vendor_ext_provider() callback
c100951 platform: generic: renesas: rzfive: Add support to configure the PMA
2491242 platform: generic: renesas: rzfive: Configure the PMA region
67b2a40 lib: sbi: sbi_ecall: Check the range of SBI error
5a75f53 lib: sbi/sbi_domain: cosmetic style fixes
bc06ff6 lib: utils/fdt/fdt_domain: Simplify region access permission check
17b3776 docs: domain_support: Update the DT example
1364d5a lib: sbi_hsm: Factor out invalid state detection
40f16a8 lib: sbi_hsm: Don't try to restore state on failed change
c88e039 lib: sbi_hsm: Ensure errors are consistent with spec
b1ae6ef lib: sbi_hsm: Move misplaced comment
07673fc lib: sbi_hsm: Remove unnecessary include
8a40306 lib: sbi_hsm: Export some functions
73623a0 lib: sbi: Add system suspend skeleton
c9917b6 lib: sbi: Add system_suspend_allowed domain property
7c964e2 lib: sbi: Implement system suspend
37558dc docs: Correct opensbi-domain property name
5ccebf0 platform: generic: Add system suspend test
908be1b gpio/starfive: add gpio driver and support gpio reset
4b28afc make: Add a command line option for debugging OpenSBI
e9d08bd lib: utils/i2c: Add minimal StarFive jh7110 I2C driver
568ea49 platform: starfive: add PMIC power ops in JH7110 visionfive2 board
506144f lib: serial: Cadence: Enable compatibility for cdns,uart-r1p8
1fe8dc9 lib: sbi_pmu: add callback for counter width
51951d9 lib: sbi_pmu: Implement sbi_pmu_counter_fw_read_hi
60c358e lib: sbi_pmu: Reserve space for implementation specific firmware events
548e4b4 lib: sbi_pmu: Rename fw_counter_value
b51ddff lib: sbi_pmu: Update sbi_pmu dev ops
641d2e9 lib: sbi_pmu: Use dedicated event code for platform firmware events
57d3aa3 lib: sbi_pmu: Introduce fw_counter_write_value API
c631a7d lib: sbi_pmu: Add hartid parameter PMU device ops
d56049e lib: sbi: Refactor the calls to sbi_hart_switch_mode()
e8e9ed3 lib: sbi: Set the state of a hart to START_PENDING after the hart is ready
c6a092c lib: sbi: Clear IPIs before init_warm_startup in non-boot harts
ed88a63 lib: sbi_scratch: Optimize the alignment code for alloc size
73ab11d lib: sbi: Fix how to check whether the domain contains fw_region
f64dfcd lib: sbi: Introduce sbi_entry_count() function
30b9e7e lib: sbi_hsm: Fix sbi_hsm_hart_start() for platform with hart hotplug
8e90259 lib: sbi_hart: clear mip csr during hart init
45ba2b2 include: Add defines for SBI CPPC extension
33caae8 lib: sbi: Implement SBI CPPC extension
91767d0 lib: sbi: Print the CPPC device name
edc9914 lib: sbi_pmu: Align the event type offset as per SBI specification
ee016a7 docs: Correct FW_JUMP_FDT_ADDR calculation example
2868f26 lib: utils: fdt_fixup: avoid buffer overrun
66fa925 lib: sbi: Optimize sbi_tlb
24dde46 lib: sbi: Optimize sbi_ipi
80078ab sbi: tlb: Simplify to tlb_process_count/tlb_process function
bf40e07 lib: sbi: Optimize sbi_tlb queue waiting
eeab500 platform: generic: andes/renesas: Add SBI EXT to check for enabling IOCP errata
f692289 firmware: Optimize loading relocation type
e41dbb5 firmware: Change to use positive offset to access relocation entries
bdb3c42 lib: sbi: Do not clear active_events for cycle/instret when stopping
674e019 lib: sbi: Fix counter index calculation for SBI_PMU_CFG_FLAG_SKIP_MATCH
f5dfd99 lib: sbi: Don't check SBI error range for legacy console getchar
7919530 lib: sbi: Add debug print when sbi_pmu_init fails
4e33530 lib: sbi: Remove unnecessary semicolon
6bc02de lib: sbi: Simplify sbi_ipi_process remove goto
dc1c7db lib: sbi: Simplify BITS_PER_LONG definition
f58c140 lib: sbi: Introduce register_extensions extension callback
e307ba7 lib: sbi: Narrow vendor extension range
042f0c3 lib: sbi: pmu: Remove unnecessary probe function
8b952d4 lib: sbi: Only register available extensions
767b5fc lib: sbi: Optimize probe of srst/susp
c3e31cb lib: sbi: Remove 0/1 probe implementations
33f1722 lib: sbi: Document sbi_ecall_extension members
d4c46e0 Makefile: Dereference symlinks on install
8b99a7f lib: sbi: Fix return of sbi_console_init
264d0be lib: utils: Improve fdt_serial_init
9a0bdd0 lib: utils: Improve fdt_ipi
122f226 lib: utils: Improve fdt_timer
df75e09 lib: utils/ipi: buffer overrun aclint_mswi_cold_init
bdde2ec lib: sbi: Align system suspend errors with spec
aad7a37 include: sbi_scratch: Add helper macros to access data type
5cf9a54 platform: Allow platforms to specify heap size
40d36a6 lib: sbi: Introduce simple heap allocator
2a04f70 lib: sbi: Print scratch size and usage at boot time
bbff53f lib: sbi_pmu: Use heap for per-HART PMU state
ef4542d lib: sbi: Use heap for root domain creation
66daafe lib: sbi: Use scratch space to save per-HART domain pointer
fa5ad2e lib: utils/gpio: Use heap in SiFive and StartFive GPIO drivers
903e88c lib: utils/i2c: Use heap in DesignWare and SiFive I2C drivers
5a8cfcd lib: utils/ipi: Use heap in ACLINT MSWI driver
3013716 lib: utils/irqchip: Use heap in PLIC, APLIC and IMSIC drivers
7e5636a lib: utils/timer: Use heap in ACLINT MTIMER driver
3c1c972 lib: utils/fdt: Use heap in FDT domain parsing
acbd8fc lib: utils/ipi: Use scratch space to save per-HART MSWI pointer
f0516be lib: utils/timer: Use scratch space to save per-HART MTIMER pointer
b3594ac lib: utils/irqchip: Use scratch space to save per-HART PLIC pointer
1df52fa lib: utils/irqchip: Don't check hartid in imsic_update_hartid_table()
355796c lib: utils/irqchip: Use scratch space to save per-HART IMSIC pointer
524feec docs: Add OpenSBI logo and use it in the top-level README.md
932be2c README.md: Improve project copyright information
8153b26 platform/lib: Set no-map attribute on all PMP regions
d64942f firmware: Fix find hart index
27c957a lib: reset: Move fdt_reset_init into generic_early_init
8bd666a lib: sbi: check A2 register in ecall_dbcn_handler.
2552799 include: Bump-up version to 1.3
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20230630160717.843044-1-bmeng@tinylab.org>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The startup code of the bios has slightly been changed, apart
from that, there should not be any functional changes this time.
Signed-off-by: Thomas Huth <thuth@redhat.com>
start.S currently cannot be compiled with Clang 16 and binutils 2.40:
ld: start.o(.text+0x8): misaligned symbol `__bss_start' (0xc1e5) for
relocation R_390_PC32DBL
According to the built-in linker script of ld, the symbol __bss_start
can actually point *before* the .bss section and does not need to have
any alignment, so in certain situations (like when using the internal
assembler of Clang), the __bss_start symbol can indeed be unaligned
and thus it is not suitable for being used with the "larl" instruction
that needs an address that is at least aligned to halfwords.
The problem went unnoticed so far since binutils <= 2.39 did not
check the alignment, but starting with binutils 2.40, such unaligned
addresses are now refused.
Fix it by loading the address indirectly instead.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2216662
Reported-by: Miroslav Rezanina <mrezanin@redhat.com>
Suggested-by: Andreas Krebbel <andreas.krebbel@de.ibm.com>
Message-Id: <20230629104821.194859-8-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The stack array is only referenced from the start-up code (which is
shared between the s390-ccw.img and the s390-netboot.img), but it is
currently declared twice, once in main.c and once in netmain.c.
It makes more sense to declare this in start.S instead - which will
also be helpful in the next patch, since we need to mention the .bss
section in start.S in that patch.
While we're at it, let's also drop the huge alignment of the stack,
since there is no technical requirement for aligning it to page
boundaries.
Message-Id: <20230627074703.99608-4-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Providing the space of a stack frame is the duty of the caller,
so we should reserve 160 bytes before jumping into the main function.
Otherwise the main() function might write past the stack array.
While we're at it, add a proper STACK_SIZE macro for the stack size
instead of using magic numbers (this is also required for the following
patch).
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20230627074703.99608-3-thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
start.S is currently indented with a mixture of spaces and tabs, which
is quite ugly. QEMU coding style says indentation should be 4 spaces,
and this is also what we are using in the assembler files in the
tests/tcg/s390x/ folder already, so let's adjust start.S accordingly.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20230627074703.99608-2-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Recent versions of ld complain when linking the s390-ccw bios:
/usr/bin/ld: warning: start.o: missing .note.GNU-stack section implies
executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in
a future version of the linker
We can silence the warning by telling the linker to mark the stack
as not executable.
Message-Id: <20230622130822.396793-1-thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The types starting with double underscores have likely been
introduced into the s390-ccw bios to be able to re-use structs
from the Linux kernel in the past, but the corresponding structs
in cio.h have been changed there a long time ago already to not
use the variants with the double underscores anymore:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/diff/drivers/s390/cio/cio.h?id=cd6b4f27b9bb2a
So it would be good to replace these in the s390-ccw bios now, too.
Message-Id: <20230627114101.122231-1-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Any good reason why this still exist?
I can understand u* and __u* to be linux kernel like, but ulong?
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230629104821.194859-2-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fix some SMP-related boot and reboot issues with HP-UX and Linux by
correctly initializing the CPU PSW bits, disabling data and instruction
translations and unhalting the CPU in the qemu hppa_machine_reset()
function.
To work correctly some fixes are needed in the SeaBIOS-hppa firmware too,
which is why this series updates it to version 8 which includes those
fixes and enhancements:
Fixes
- boot of HP-UX with SMP, and
- reboot of Linux and HP-UX with SMP
Enhancements:
- show qemu version in boot menu
- adds exit menu entry in boot menu to quit emulation
- allow to trace PCD_CHASSIS codes more specifically
Signed-off-by: Helge Deller <deller@gmx.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZJbYWAAKCRD3ErUQojoP
X6ExAQCmOXqwJw3SjSE/+hvphJ2mMTJe3i6dU3AWOGlACxxVzAEA7dKSU4d8EtRj
NZpGKB9NE9eWwQFGJVbVgFeikap44gs=
=8zCK
-----END PGP SIGNATURE-----
Merge tag 'hppa-boot-reboot-fixes-pull-request' of https://github.com/hdeller/qemu-hppa into staging
target/hppa: Fix boot and reboot for SMP machines
Fix some SMP-related boot and reboot issues with HP-UX and Linux by
correctly initializing the CPU PSW bits, disabling data and instruction
translations and unhalting the CPU in the qemu hppa_machine_reset()
function.
To work correctly some fixes are needed in the SeaBIOS-hppa firmware too,
which is why this series updates it to version 8 which includes those
fixes and enhancements:
Fixes
- boot of HP-UX with SMP, and
- reboot of Linux and HP-UX with SMP
Enhancements:
- show qemu version in boot menu
- adds exit menu entry in boot menu to quit emulation
- allow to trace PCD_CHASSIS codes more specifically
Signed-off-by: Helge Deller <deller@gmx.de>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZJbYWAAKCRD3ErUQojoP
# X6ExAQCmOXqwJw3SjSE/+hvphJ2mMTJe3i6dU3AWOGlACxxVzAEA7dKSU4d8EtRj
# NZpGKB9NE9eWwQFGJVbVgFeikap44gs=
# =8zCK
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 24 Jun 2023 01:49:44 PM CEST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-boot-reboot-fixes-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Update to SeaBIOS-hppa version 8
target/hppa: Provide qemu version via fw_cfg to firmware
target/hppa: Fix OS reboot issues
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Update SeaBIOS-hppa to version 8.
Fixes:
- boot of HP-UX with SMP, and
- reboot of Linux and HP-UX with SMP
Enhancements:
- show qemu version in boot menu
- adds exit menu entry in boot menu to quit emulation
- allow to trace PCD_CHASSIS codes & machine run status
Signed-off-by: Helge Deller <deller@gmx.de>
The xkb official name for the Arabic keyboard layout is 'ara'.
However xkb has for at least the past 15 years also permitted it to
be named via the legacy synonym 'ar'. In xkeyboard-config 2.39 this
synoynm was removed, which breaks compilation of QEMU:
FAILED: pc-bios/keymaps/ar
/home/fred/qemu-git/src/qemu/build-full/qemu-keymap -f pc-bios/keymaps/ar -l ar
xkbcommon: ERROR: Couldn't find file "symbols/ar" in include paths
xkbcommon: ERROR: 1 include paths searched:
xkbcommon: ERROR: /usr/share/X11/xkb
xkbcommon: ERROR: 3 include paths could not be added:
xkbcommon: ERROR: /home/fred/.config/xkb
xkbcommon: ERROR: /home/fred/.xkb
xkbcommon: ERROR: /etc/xkb
xkbcommon: ERROR: Abandoning symbols file "(unnamed)"
xkbcommon: ERROR: Failed to compile xkb_symbols
xkbcommon: ERROR: Failed to compile keymap
The upstream xkeyboard-config change removing the compat
mapping is:
470ad2cd8f
Make QEMU always ask for the 'ara' xkb layout, which should work on
both older and newer xkeyboard-config. We leave the QEMU name for
this keyboard layout as 'ar'; it is not the only one where our name
for it deviates from the xkb standard name.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20230620162024.1132013-1-peter.maydell@linaro.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1709
New SeaBIOS-hppa version 7 ROM to fix Debian-12
CD-ROM boot issues.
Signed-off-by: Helge Deller <deller@gmx.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZJIExQAKCRD3ErUQojoP
XypaAP9j0YWdl1ovPiyw8fTdY5U6yCKGIjqtkXzk4egPbzkU1AD7BxMY+GbDSKv8
Lt9K+R4cu0EVxfYsz17e780wSMLPcwc=
=M8NU
-----END PGP SIGNATURE-----
Merge tag 'seabios-hppa-v7-pull-request' of https://github.com/hdeller/qemu-hppa into staging
hppa: New SeaBIOS-hppa version 7 ROM
New SeaBIOS-hppa version 7 ROM to fix Debian-12
CD-ROM boot issues.
Signed-off-by: Helge Deller <deller@gmx.de>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZJIExQAKCRD3ErUQojoP
# XypaAP9j0YWdl1ovPiyw8fTdY5U6yCKGIjqtkXzk4egPbzkU1AD7BxMY+GbDSKv8
# Lt9K+R4cu0EVxfYsz17e780wSMLPcwc=
# =M8NU
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 20 Jun 2023 09:57:57 PM CEST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'seabios-hppa-v7-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: New SeaBIOS-hppa version 7
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Update SeaBIOS-hppa to version 7 which fixes a boot problem
with Debian-12 install CD images.
The problem with Debian-12 is, that the ramdisc got bigger
than what the firmware could load in one call to the LSI
scsi driver.
Signed-off-by: Helge Deller <deller@gmx.de>
They are required only for system emulation (i.e. have_system is true).
Signed-off-by: Carlos Santos <casantos@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In the beginning, the network bootloader was considered experimental and
thus optional, but it is well established nowadays and configure always
checks for roms/SLOF before compiling pc-bios/s390-ccw.
Therefore, it makes sense to always build it together with the other
part of the s390-ccw bios.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the handling of the roms/SLOF submodule out of the main Makefile,
since we are going to remove submodules from the build process of QEMU.
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bring the files in line with the QEMU coding style, with spaces
for indentation.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/378
Signed-off-by: Yeqi Fu <fufuyqqqqqq@gmail.com>
Message-Id: <20230315032649.57568-1-fufuyqqqqqq@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Deprecate 32-bit x86 and arm hosts for system emulation
* Check bison version to be >= 3.0
* Compile vnc test only if vnc is really enabled
* Check docs/config/ich9-ehci-uhci.cfg via the readconfig-test
* s390x: Add support for list-directed IPL from ECKD DASD
-----BEGIN PGP SIGNATURE-----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=p13b
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-03-07' of https://gitlab.com/thuth/qemu into staging
* Refine the distro support policy
* Deprecate 32-bit x86 and arm hosts for system emulation
* Check bison version to be >= 3.0
* Compile vnc test only if vnc is really enabled
* Check docs/config/ich9-ehci-uhci.cfg via the readconfig-test
* s390x: Add support for list-directed IPL from ECKD DASD
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmQIQD0RHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbX+EA/5ATc/Rz9Y8TZF36/sUKrmjOxQnX91hgRW
# zovgZejoHtek1AC4pLd9kcpo1JonXkOfmbkNRYTw6+1wY6Ipt2apkWAc+MqfvQ80
# dGznbLXnX/E2QHW7h5XqvAhRGvjog9b38zAQcR37PKZ9DkSfWBwMgTT2SXYpLUjR
# YWgqPGBYRq1ViG4q7hv2dHqi/idzh+DOWFGU5NAQC1fEBOmPYN9u6vfbX86dwZsy
# S9pqw16yN2MZKL2bgIViFIjdhPPMO3RFcv8NTPipzk3g/pHNIv58+xCE8r/Tp8LW
# JRQzdh6JbGvj1BXH68igXWGUFW6dhOXZWhgmFe4QEDaiCj91pHGvQCYgo2agx2bl
# rXaSQXSMhIcm+t9C9kO6UNxZf+1HohcM1ZlQXhvX6FcBPVMUx/52YEpiK+OtBKyq
# 43AlKp4fp1xXLFSOyMNgSMR90sksng6CEoQqTr0jCZtF8H18wb+eHfb6dME3XRCw
# SKQeNGhkP1FxaQnlRAkeBxW7GkDE5YBjf9pSIaLZ/8VsLdyo3SK/DLkre5+qnu/V
# lksZlt1K7xDLxRFopBuVJ3MHeFSRazBDbWfrRFOALkdbGEEeZnnmEPFjD3mag+P4
# 1y9WmBJHRLlvhlm195WA8babenUZoOfLkPrL0k7mNLs9sZyx1eIkZfOUgCWjFE2V
# 9VBOWL8oi/w=
# =p13b
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 08 Mar 2023 07:58:53 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-03-07' of https://gitlab.com/thuth/qemu:
pc-bios/s390-ccw: Update s390-ccw.img with the list-directed IPL fix
pc-bios: Add support for List-Directed IPL from ECKD DASD
docs/config: Set the "kvm" accelerator via "[accel]" section
tests/qtest/readconfig: Test docs/config/ich9-ehci-uhci.cfg
tests/qtest/readconfig: Rework test_object_rng_resp into a generic function
gitlab-ci.d/crossbuilds: Drop the 32-bit arm system emulation jobs
docs/about/deprecated: Deprecate 32-bit arm hosts for system emulation
gitlab-ci.d/crossbuilds: Drop the i386 system emulation job
docs/about/deprecated: Deprecate 32-bit x86 hosts for system emulation
include/hw/i386: Clean up includes in x86.h
test: Check vnc enable before compiling vnc test
Hexagon (meson.build): define min bison version
docs/about/build-platforms: Refine the distro support policy
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check for a List Directed IPL Boot Record, which would supersede the CCW type
entries. If the record is valid, proceed to use the new style pointers
and perform LD-IPL. Each block pointer is interpreted as either an LD-IPL
pointer or a legacy CCW pointer depending on the type of IPL initiated.
In either case CCW- or LD-IPL is transparent to the user and will boot the same
image regardless of which set of pointers is used. Because the interactive boot
menu is only written with the old style pointers, the menu will be disabled for
List Directed IPL from ECKD DASD.
If the LD-IPL fails, retry the IPL using the CCW type pointers.
If no LD-IPL boot record is found, simply perform CCW type IPL as usual.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Message-Id: <20230221174548.1866861-2-jrossi@linux.ibm.com>
[thuth: Drop some superfluous parantheses]
Signed-off-by: Thomas Huth <thuth@redhat.com>
When qemu-keymap is not available on the host, and enable-xkbcommon
is specified, parallel make fails with:
% make clean
...
% make -j 32
...
FAILED: pc-bios/keymaps/is
./qemu-keymap -f pc-bios/keymaps/is -l is
/bin/sh: ./qemu-keymap: No such file or directory
... many similar messages ...
The code always runs find_program, rather than waiting to build
qemu-keymap, because it looks for CONFIG_XKBCOMMON in config_host
rather than config_host_data. Making serially succeeds, by soft
linking files from pc-bios/keymaps, but that is not the desired
result for enable-xkbcommon.
Examining all occurrences of 'in config_host' for similar bugs shows one
instance in the docs, which is also fixed here.
Fixes: 4113f4cfee ("meson: move xkbcommon to meson")
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1675708442-74966-1-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's been deprecated since QEMU v6.2, so it should be OK to
finally remove this now.
Message-Id: <20230209161540.1054669-1-thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fix typos (discovered with the 'codespell' utility).
Note: Though "migrateable" still seems to be a valid spelling, we change
it to "migratable" since this is the way more common spelling here.
Message-Id: <20221111182828.282251-1-thuth@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-32-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-31-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-30-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AJB: add clean dep to distclean]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-16-alex.bennee@linaro.org>
In preparation for adding Docker container support, detect compiler options
just once rather than once per Make run; container startup overhead is
substantial and doing the detection just once makes things faster.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-15-alex.bennee@linaro.org>
In preparation for adding Docker container support, detect compiler options
just once rather than once per Make run; container startup overhead is
substantial and doing the detection just once makes things faster.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-14-alex.bennee@linaro.org>
Just use using the compiler binary, with -nostdlib in the case of the
linker; the compiler driver (whether i686-*-gcc, or x86_64-*-gcc with
the -m32 option) will then pick the right magic option to as and ld.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
df22fbb751 ("qboot: update to latest submodule") updated the qboot
submodule from a5300c49 to 8ca302e8. However, qboot isn't built during
the QEMU's build process but rather is included in binary form. So
rebuild it here.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
[Rebuilt it myself for paranoia. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Upgrade OpenSBI from v1.0 to v1.1 and the pre-built bios images.
The v1.1 release includes the following commits:
5b99603 lib: utils/ipi: Fix size check in aclint_mswi_cold_init()
6dde435 lib: utils/sys: Extend HTIF library to allow custom base address
8257262 platform: sifive_fu740: do not use a global in da9063_reset/shutdown
fb688d9 platform: sifive_fu740: fix reset when watchdog is running
5d025eb lib: fix pointer of type 'void *' used in arithmetic
632f593 lib: sbi: Map only the counters enabled in hardware
3b7c204 lib: sbi: Disable interrupt during config matching
a26dc60 lib: sbi: Disable interrupt and inhibit counting in M-mode during init
5d53b55 Makefile: fix build with binutils 2.38
6ad8917 lib: fix compilation when strings.h is included
ce4c018 lib: utils/serial: Round UART8250 baud rate divisor to nearest integer
01250d0 include: sbi: Add AIA related CSR defines
8f96070 lib: sbi: Detect AIA CSRs at boot-time
65b4c7c lib: sbi: Use AIA CSRs for local interrupts when available
222132f lib: sbi: Add sbi_trap_set_external_irqfn() API
5f56314 lib: utils/irqchip: Allow multiple FDT irqchip drivers
1050940 include: sbi: Introduce nascent_init() platform callback
55e79f8 lib: sbi: Enable mie.MEIE bit for IPIs based on external interrupts.
9f73669 lib: utils/irqchip: Add IMSIC library
811da5c lib: utils/irqchip: Add FDT based driver for IMSIC
7127aaa lib: utils: Disable appropriate IMSIC DT nodes in fdt_fixups()
9979265 lib: utils/irqchip: Add APLIC initialization library
3461219 lib: utils/irqchip: Add FDT based driver for APLIC
8e2ef4f lib: utils: Disable appropriate APLIC DT nodes in fdt_fixups()
3a69cc1 lib: sbi: fix typo in is_region_subset
f2ccf2f lib: sbi: verbose sbi_domain_root_add_memregion
f3f4604 lib: sbi: Add a simple external interrupt handling framework
4998a71 lib: utils: serial: Initial commit of xlnx-uartlite
2dfbd3c lib: pmp_set/pmp_get moved errors from runtime to compile time
b6b7220 firmware: Fix code for accessing hart_count and stack_size
d552fc8 lib: Add error messages via conditional compilation for the future
555bdb1 include: Use static asserts for SBI_PLATFORM_xxx_OFFSET defines
1b42d3a include: Use static asserts for SBI_SCRATCH_xxx_OFFSET defines
7924a0b include: Use static asserts for FW_DYNAMIC_INFO_xxx_OFFSET defines
722f80d include: Add defines for [m|h|s]envcfg CSRs
31fecad lib: sbi: Detect menvcfg CSR at boot time
47d6765 lib: sbi: Enable Zicbo[m|z] extensions in the menvcfg CSR
794986f lib: sbi: Enable Svpbmt extension in the menvcfg CSR
499601a lib: sbi: Add Smstateen extension defines
d44568a lib: sbi: Detect Smstateen CSRs at boot-time
3383d6a lib: irqchip/imsic: configure mstateen
5c5cbb5 lib: utils/serial: support 'reg-offset' property
c1e47d0 include: correct the definition of MSTATUS_VS
9cd95e1 lib: sbi/hart: preserve csr validation value
4035ae9 docs: pmu: Improve the PMU DT bindings
d62f6da lib: sbi: Implement Sstc extension
474a9d4 lib: sbi: Fix mstatus_init() for RV32 when Sscofpmf is not available
e576b3e include: sbi: Define SBI_PMU_HW_EVENT_MAX to 256
b0c9df5 lib: sbi: Fix mhpmeventh access for rv32 in absence of sscofpmf
1a754bb lib: sbi: Detect and print privileged spec version
5a6be99 lib: sbi: Remove 's' and 'u' from misa_string() output
5b8b377 lib: sbi: Update the name of ISA string printed at boot time
d4b563c lib: sbi: Remove MCOUNTEREN and SCOUNTEREN hart features
dbc3d8f lib: sbi: Remove MCOUNTINHIBT hart feature
97a17c2 lib: sbi: Remove MENVCFG hart feature
a6ab94f lib: sbi: Fix AIA feature detection
cad6c91 lib: sbi: Convert hart features into hart extensions
be4903a lib: sbi: Detect hart features only once for each hart
994ace3 lib: sbi: Add sbi_hart_update_extension() function
023f0ad lib: sbi_platform: Add callback to populate HART extensions
f726f2d Makefile: Allow generated C source to be anywhere in build directory
7fb474b Makefile: Add support for generating C array at compile time
73cf511 lib: utils/reset: Generate FDT reset driver list at compile-time
1e62705 lib: utils/serial: Generate FDT serial driver list at compile-time
bfeb305 lib: utils/timer: Generate FDT timer driver list at compile-time
3a69d12 lib: utils/irqchip: Generate FDT irqchip driver list at compile-time
4ee0c57 lib: utils/ipi: Generate FDT ipi driver list at compile-time
998ed43 lib: utils/i2c: Generate FDT i2c adapter driver list at compile-time
4eacd82 lib: utils/gpio: Generate FDT gpio driver list at compile-time
a3a3c60 platform: generic: Generate platform override module list at compile-time
9a7a677 platform: generic: Move Sifive platform overrides into own directory
851c14d lib: utils/irqchip: fix typo when checking for CPU node
90a9dd2 lib: utils/fdt: introduce fdt_node_is_enabled()
616da52 lib: utils: check if CPU node is enabled
575bb4e platform: generic: check if CPU node is enabled
1bc67db lib: utils/fdt: rename fdt_parse_max_hart_id
f067bb8 lib: sbi: fix system_opcode_insn
fab0379 lib: utils/fdt: Require match data to be const
295e5f3 lib: sbi_timer: Drop unnecessary get_platform_ticks wrapper
ff65bfe lib: sbi_illegal_insn: Constify illegal_insn_table
cb8271c lib: sbi_illegal_insn: Add emulation for fence.tso
adc3388 lib: sbi_trap: Redirect exception based on hedeleg
ce1d618 platform: generic: add overrides for vendor extensions
b20ed9f lib: sbi_hsm: Call a device hook during hart resume
79e42eb lib: sbi_hsm: Assume a consistent resume address
2ea7799 lib: irqchip/plic: Constify plic_data pointers
8c362e7 lib: irqchip/plic: Factor out a context init function
415ecf2 lib: irqchip/plic: Add context save/restore helpers
2b79b69 lib: irqchip/plic: Add priority save/restore helpers
69be3df lib: utils/irqchip: Add FDT wrappers for PLIC save/restore functions
5e56758 lib: utils/irqchip: Add wrapper for T-HEAD PLIC delegation
9dc5ec5 platform: Add HSM implementation for Allwinner D1
551c70c include: sbi: Add mtinst/htinst psuedoinstructions
187127f lib: sbi: Fixup tinst for exceptions in sbi_misaligned_*()
a07402a lib: sbi: Fix tval and tinst for sbi_get_insn()
c653001 lib: utils: Remove CSRs that set/clear an IMSIC interrupt file bits
7738345 lib: utils/timer: Add a separate compatible for the D1 CLINT
d76a196 lib: irqchip/plic: fix typo in plic_warm_irqchip_init
6f1fe98 lib: utils/timer: Remove Allwinner D1 CLINT compatibles
c6fdbcf include: sbi: Change spec version to 1.0
3f66465 lib: pmu: allow to use the highest available counter
4489876 include: Bump-up version to 1.1
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220713090613.204046-1-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The only change is that now SLOF can also boot big endian zImage
but kernel-addr=0 is still required.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
For accessing single blocks during boot, it's the logical block size that
matters. (Physical block sizes are rather interesting e.g. for creating
file systems with the correct alignment for speed reasons etc.).
So the s390-ccw bios has to use the logical block size for calculating
sector numbers during the boot phase, the "physical_block_exp" shift
value must not be taken into account. This change fixes the boot process
when the guest hast been installed on a disk where the logical block size
differs from the physical one, e.g. if the guest has been installed
like this:
qemu-system-s390x -nographic -accel kvm -m 2G \
-drive if=none,id=d1,file=fedora.iso,format=raw,media=cdrom \
-device virtio-scsi -device scsi-cd,drive=d1 \
-drive if=none,id=d2,file=test.qcow2,format=qcow2
-device virtio-blk,drive=d2,physical_block_size=4096,logical_block_size=512
Linux correctly uses the logical block size of 512 for the installation,
but the s390-ccw bios tries to boot from a disk with 4096 block size so
far, as long as this patch has not been applied yet (well, it used to work
by accident in the past due to the virtio_assume_scsi() hack that used to
enforce 512 byte sectors on all virtio-block disks, but that hack has been
well removed in commit 5447de2619 to fix other scenarios).
Fixes: 5447de2619 ("pc-bios/s390-ccw/virtio-blkdev: Remove virtio_assume_scsi()")
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2112303
Message-Id: <20220805094214.285223-1-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220707163720.1421716-5-berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The option generates a lot of warnings for integers casted to pointers,
for example:
/home/pbonzini/work/upstream/qemu/pc-bios/s390-ccw/dasd-ipl.c:174:19: warning: array subscript 0 is outside array bounds of ‘CcwSeekData[0]’ [-Warray-bounds]
174 | seekData->cyl = 0x00;
| ~~~~~~~~~~~~~~^~~~~~
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
softmmu/datadir.c had its own implementation to find files in the
build tree, but now bundle mechanism provides the unified
implementation which works for datadir and the other files.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220624145039.49929-4-akihiko.odaki@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* fix cross compilation CFLAGS and compiler choice
* do not specify -bios option for tests/vm
* miscellaneous fixes
* preparation for pre-install tree in the build directory (Akihiko)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmLNbVcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO1KggArZDxqEOyTCvsu2H1Bf7j2J4Mfx2k
+8FiDNpdfnmpQIc8KnQHZN7QKodXhaPwShoK6NZPYeAbg62n5/RUlF+fj2DbdCN0
udBqt9V5dmjF2S+vb2++pWSpEUpqH1yAVYX3t0MvQDkfscADYYqYndHkYqVP34Sy
sIIkDGdFODQqHCPDmNNFWFHt8X5Zu8t5j53NjPebdryZBDiA4DgFnorTw0sTPV1H
XeS2M06C1lkGyWrdy7eaF9IL3tmlCsuc6xiA0RAhzJiWgHe1LQZOUPMfR+GKuidI
E9Cz05iGyOlH+CNYgdukqT8BdJtcjWZwDgYWVxVIswv461h/asoENUIx1g==
=Nyzq
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* fuzzing fixes (Alexander)
* fix cross compilation CFLAGS and compiler choice
* do not specify -bios option for tests/vm
* miscellaneous fixes
* preparation for pre-install tree in the build directory (Akihiko)
# gpg: Signature made Tue 12 Jul 2022 13:47:19 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
meson: place default firmware path under .../share
qga: Relocate a path emitted in the help text
build: Do not depend on pc-bios for config-host.mak
accel: kvm: Fix memory leak in find_stats_descriptors
audio/dbus: fix building
fuzz: only use generic-fuzz targets on oss-fuzz
build: improve -fsanitize-coverage-allowlist check
build: try both native and cross compilers
configure: pass whole target name to probe_target_compiler
tests/tcg: compile system emulation tests as freestanding
configure: write EXTRA_CFLAGS for all sub-Makefiles
configure: allow more host/target combos to use the host compiler
configure, pc-bios/vof: pass cross CFLAGS correctly
configure, pc-bios/s390-ccw: pass cross CFLAGS correctly
configure, pc-bios/optionrom: pass cross CFLAGS correctly
pc-bios/optionrom: use -m16 unconditionally
scsi/lsi53c895a: fix use-after-free in lsi_do_msgout (CVE-2022-0216)
tests/vm: do not specify -bios option
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# pc-bios/s390-ccw/netboot.mak
