We're hitting an assert when we pass in alignment == 0 since that's not
a power of two. so pass in the ideal page size.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230728162927.5009-1-imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With reserved_va, mmap.c expects to have pre-allocated host address
space for the entire guest address space. When combined with the -B
command-line option, ensure that the chosen address does not overlap
anything else. Ensure that mmap_next_start is within reserved_va,
as we use it within mmap.c without checking.
Reviewed by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230727161148.444988-1-richard.henderson@linaro.org>
On overflow of code_gen_buffer, we unlock the guest pages we had been
translating, but failed to clear gen_tb. On restart, if we cannot
allocate a TB, we exit to the main loop to perform the flush of all
TBs as soon as possible. With garbage in gen_tb, we hit an assert:
../src/accel/tcg/tb-maint.c:348:page_unlock__debug: \
assertion failed: (page_is_locked(pd))
Fixes: deba78709a ("accel/tcg: Always lock pages before translation")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While less susceptible to optimization problems than left and right,
interval_tree_iter_next also reads rb_parent(), so make sure that
stores and loads are atomic.
This goes further than technically required, changing all loads to
be atomic, rather than simply the ones in the iteration side. But
it doesn't really affect the code generation on the rebalance side
and is cleaner to handle everything the same.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Ensure that the stores to rb_left and rb_right are complete before
inserting the new node into the tree. Otherwise a concurrent reader
could see garbage in the new leaf.
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fixes a race condition (generally without optimization) in which
the subtree is re-read after the protecting if condition.
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The gdb remote protocol has a special interrupt character (0x03) that is
transmitted outside the regular packet processing, and represents a
Ctrl-C pressed in the client. Despite not being a regular packet, it
does expect a regular stop response if the stub successfully stops the
running program.
See: https://sourceware.org/gdb/onlinedocs/gdb/Interrupts.html
Inhibiting the stop reply packet can lead to gdb client hang. So permit
a stop response when receiving a character from gdb that stops the vm.
Additionally, add a warning if that was not a 0x03 character, because
the gdb session is likely to end up getting confused if this happens.
Cc: qemu-stable@nongnu.org
Fixes: 758370052f ("gdbstub: only send stop-reply packets when allowed to")
Reported-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Message-id: 20230711085903.304496-1-npiggin@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Runs into core dump on arm64 and the backtrace extracted from the
core dump is shown as below. It's caused by accessing uninitialized
@kvm_state in kvm_flush_coalesced_mmio_buffer() due to commit 176d073029
("hw/arm/virt: Use machine_memory_devices_init()"), where the machine's
memory region is added earlier than before.
main
qemu_init
configure_accelerators
qemu_opts_foreach
do_configure_accelerator
accel_init_machine
kvm_init
virt_kvm_type
virt_set_memmap
machine_memory_devices_init
memory_region_add_subregion
memory_region_add_subregion_common
memory_region_update_container_subregions
memory_region_transaction_begin
qemu_flush_coalesced_mmio_buffer
kvm_flush_coalesced_mmio_buffer
Fix it by bailing early in kvm_flush_coalesced_mmio_buffer() on the
uninitialized @kvm_state. With this applied, no crash is observed on
arm64.
Fixes: 176d073029 ("hw/arm/virt: Use machine_memory_devices_init()")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230731125946.2038742-1-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently we list all the Arm decodetree files together and add them
unconditionally to arm_ss. This means we build them for both
qemu-system-aarch64 and qemu-system-arm. However, some of them are
AArch64-specific, so there is no need to build them for
qemu-system-arm. (Meson is smart enough to notice that the generated
.c.inc file is not used by any objects that go into qemu-system-arm,
so we only unnecessarily run decodetree, not anything more
heavyweight like a recompile or relink, but it's still unnecessary
work.)
Split gen into gen_a32 and gen_a64, and only add gen_a64 for
TARGET_AARCH64 compiles.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230718104628.1137734-1-peter.maydell@linaro.org
In commit 0b188ea05a we changed the implementation of
trans_CSEL() to use tcg_constant_i32(). However, this change
was incorrect, because the implementation of the function
sets up the TCGv_i32 rn and rm to be either zero or else
a TCG temp created in load_reg(), and these TCG temps are
then in both cases written to by the emitted TCG ops.
The result is that we hit a TCG assertion:
qemu-system-arm: ../../tcg/tcg.c:4455: tcg_reg_alloc_mov: Assertion `!temp_readonly(ots)' failed.
(or on a non-debug build, just produce a garbage result)
Adjust the code so that rn and rm are always writeable
temporaries whether the instruction is using the special
case "0" or a normal register as input.
Cc: qemu-stable@nongnu.org
Fixes: 0b188ea05a ("target/arm: Use tcg_constant in trans_CSEL")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230727103906.2641264-1-peter.maydell@linaro.org
Prcb may be set to 0 for some CPUs if the dump was taken before they
start. The dump may still contain valuable information for started CPUs
so don't abandon conversion in such a case.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-id: 20230611033434.14659-1-akihiko.odaki@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When converting to decodetree, the code to rebuild mop for the pair
only made it into trans_STP and not into trans_STGP.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1790
Fixes: 8c212eb659 ("target/arm: Convert load/store-pair to decodetree")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230726165416.309624-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the stl/ldl pci dma api for writing/reading doorbells. This removes
the explicit endian conversions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Please include these bug fixes in QEMU 8.1. Thanks!
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmTCzPUACgkQnKSrs4Gr
c8g1DAf/fPUQ4zRsCn079pHIyK9TFo4COm23p4kiusxj8otfjt8LH1Zsc9pGWC2+
bl2RlnPID8JlyJFDRN7b/RCEhj45a83GtCmhDDmqVgy1eO5vwOKm2XyyWeD+pq/U
Hf2QLPLZZ7tCD8Njpty+gB3Ux4zqthKGXSg8FpJ3w0tl4me2efLvjMa6jHMwtnHT
aAbyQ3WMpT9w4XHLqRQDHzBqrTSY4od3nl9SrM/DQ2klLIcz8ECTEZVBY9B3pq6m
QvAg24tfb0QvS14YnZv/PMCfOaVuE87M9G4f93pCynnMxMYze+XczL0sGhIAS9wp
03NgGlhGumOix6r2kHjlG6p3xywV8A==
=jMf8
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
Please include these bug fixes in QEMU 8.1. Thanks!
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmTCzPUACgkQnKSrs4Gr
# c8g1DAf/fPUQ4zRsCn079pHIyK9TFo4COm23p4kiusxj8otfjt8LH1Zsc9pGWC2+
# bl2RlnPID8JlyJFDRN7b/RCEhj45a83GtCmhDDmqVgy1eO5vwOKm2XyyWeD+pq/U
# Hf2QLPLZZ7tCD8Njpty+gB3Ux4zqthKGXSg8FpJ3w0tl4me2efLvjMa6jHMwtnHT
# aAbyQ3WMpT9w4XHLqRQDHzBqrTSY4od3nl9SrM/DQ2klLIcz8ECTEZVBY9B3pq6m
# QvAg24tfb0QvS14YnZv/PMCfOaVuE87M9G4f93pCynnMxMYze+XczL0sGhIAS9wp
# 03NgGlhGumOix6r2kHjlG6p3xywV8A==
# =jMf8
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 27 Jul 2023 01:00:53 PM PDT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
block/blkio: use blkio_set_int("fd") to check fd support
block/blkio: fall back on using `path` when `fd` setting fails
block/blkio: retry blkio_connect() if it fails using `fd`
block/blkio: move blkio_connect() in the drivers functions
block: Fix pad_request's request restriction
block/file-posix: fix g_file_get_contents return path
block/blkio: do not use open flags in qemu_open()
block/blkio: enable the completion eventfd
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Setting the `fd` property fails with virtio-blk-* libblkio drivers
that do not support fd passing since
https://gitlab.com/libblkio/libblkio/-/merge_requests/208.
Getting the `fd` property, on the other hand, always succeeds for
virtio-blk-* libblkio drivers even when they don't support fd passing.
This patch switches to setting the `fd` property because it is a
better mechanism for probing fd passing support than getting the `fd`
property.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230727161020.84213-5-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu_open() fails if called with an unix domain socket in this way:
-blockdev node-name=drive0,driver=virtio-blk-vhost-user,path=vhost-user-blk.sock,cache.direct=on: Could not open 'vhost-user-blk.sock': No such device or address
Since virtio-blk-vhost-user does not support fd passing, let`s always fall back
on using `path` if we fail the fd passing.
Fixes: cad2ccc395 ("block/blkio: use qemu_open() to support fd passing for virtio-blk")
Reported-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230727161020.84213-4-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
libblkio 1.3.0 added support of "fd" property for virtio-blk-vhost-vdpa
driver. In QEMU, starting from commit cad2ccc395 ("block/blkio: use
qemu_open() to support fd passing for virtio-blk") we are using
`blkio_get_int(..., "fd")` to check if the "fd" property is supported
for all the virtio-blk-* driver.
Unfortunately that property is also available for those driver that do
not support it, such as virtio-blk-vhost-user.
So, `blkio_get_int()` is not enough to check whether the driver supports
the `fd` property or not. This is because the virito-blk common libblkio
driver only checks whether or not `fd` is set during `blkio_connect()`
and fails with -EINVAL for those transports that do not support it
(all except vhost-vdpa for now).
So let's handle the `blkio_connect()` failure, retrying it using `path`
directly.
Fixes: cad2ccc395 ("block/blkio: use qemu_open() to support fd passing for virtio-blk")
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230727161020.84213-3-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is in preparation for the next patch, where for virtio-blk
drivers we need to handle the failure of blkio_connect().
Let's also rename the *_open() functions to *_connect() to make
the code reflect the changes applied.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230727161020.84213-2-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_pad_request() relies on requests' lengths not to exceed SIZE_MAX,
which bdrv_check_qiov_request() does not guarantee.
bdrv_check_request32() however will guarantee this, and both of
bdrv_pad_request()'s callers (bdrv_co_preadv_part() and
bdrv_co_pwritev_part()) already run it before calling
bdrv_pad_request(). Therefore, bdrv_pad_request() can safely call
bdrv_check_request32() without expecting error, too.
In effect, this patch will not change guest-visible behavior. It is a
clean-up to tighten a condition to match what is guaranteed by our
callers, and which exists purely to show clearly why the subsequent
assertion (`assert(*bytes <= SIZE_MAX)`) is always true.
Note there is a difference between the interfaces of
bdrv_check_qiov_request() and bdrv_check_request32(): The former takes
an errp, the latter does not, so we can no longer just pass
&error_abort. Instead, we need to check the returned value. While we
do expect success (because the callers have already run this function),
an assert(ret == 0) is not much simpler than just to return an error if
it occurs, so let us handle errors by returning them up the stack now.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-id: 20230714085938.202730-1-hreitz@redhat.com
Fixes: 18743311b8
("block: Collapse padded I/O vecs exceeding IOV_MAX")
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The g_file_get_contents() function returns a g_boolean. If it fails, the
returned value will be 0 instead of -1. Solve the issue by skipping
assigning ret value.
This issue was found by Matthew Rosato using virtio-blk-{pci,ccw} backed
by an NVMe partition e.g. /dev/nvme0n1p1 on s390x.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20230727115844.8480-1-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Unfortunately
commit 03b6762144
Author: Denis V. Lunev <den@openvz.org>
Date: Mon Jul 17 16:55:40 2023 +0200
qemu-nbd: pass structure into nbd_client_thread instead of plain char*
has introduced a regression. struct NbdClientOpts resides on stack inside
'if' block. This specifically means that this stack space could be reused
once the execution will leave that block of the code.
This means that parameters passed into nbd_client_thread could be
overwritten at any moment.
The patch moves the data to the namespace of main() function effectively
preserving it for the whole process lifetime.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
CC: <qemu-stable@nongnu.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20230727105828.324314-1-den@openvz.org>
Signed-off-by: Eric Blake <eblake@redhat.com>
qemu_open() in blkio_virtio_blk_common_open() is used to open the
character device (e.g. /dev/vhost-vdpa-0 or /dev/vfio/vfio) or in
the future eventually the unix socket.
In all these cases we cannot open the path in read-only mode,
when the `read-only` option of blockdev is on, because the exchange
of IOCTL commands for example will fail.
In order to open the device read-only, we have to use the `read-only`
property of the libblkio driver as we already do in blkio_file_open().
Fixes: cad2ccc395 ("block/blkio: use qemu_open() to support fd passing for virtio-blk")
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2225439
Reported-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20230726074807.14041-1-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Hi
This is the migration PULL request. It is the same than yesterday with proper PULL headers.
It pass CI. It contains:
- Fabiano rosas trheadinfo cleanups
- Hyman Huang dirtylimit changes
- Part of my changes
- Peter Xu documentation
- Tejus updato to migration descriptions
- Wei want improvements for postocpy and multifd setup
Please apply.
Thanks, Juan.
-----BEGIN PGP SIGNATURE-----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=J74B
-----END PGP SIGNATURE-----
Merge tag 'migration-20230726-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request
Hi
This is the migration PULL request. It is the same than yesterday with proper PULL headers.
It pass CI. It contains:
- Fabiano rosas trheadinfo cleanups
- Hyman Huang dirtylimit changes
- Part of my changes
- Peter Xu documentation
- Tejus updato to migration descriptions
- Wei want improvements for postocpy and multifd setup
Please apply.
Thanks, Juan.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmTBCrgACgkQ9IfvGFhy
# 1yPCphAAvZr6HqULECPv/g6gYIiNjl2WQxSgaOnJPnxSV3aaDMl4+rn3GowXbj1a
# V7xQIxxyYR+4BOBPHc1Ey9z2huB6tr5YhzbHhdpOPOfTdGP4LzQogyBCM9elIGbg
# GVnBX4k1yT2bE3qoKkD7FZ8GhQdFTq9NFXg/prAJm5fUnoUVVGhz4YSlWVXcpC19
# XJIAC4QA5LtQYKe9TAlLqECNHeOiMDIFa1QHtrz+52OUWgh8WOvAPtj1CK0pm9Qa
# AsvN8HvKJ2PlCBct7c+E17O/xVihKVciEgu3KXjGHurUipUSD3XCHXOURlS1IrLK
# ShegHFmMQjmS0m9mUy1+2K7DQ+ZcfScqSQCEuEOtTdnzs2him4c6p9VEGyQXa5bc
# PChjihbYmxuz1GwrprtjUGyXgqhjnwGi1yRDl9L3mZc41vfO4m2sHnMZpdJZc+dt
# 5f5oi69cXVmtzSNJqT/4nCa7g5PuaPLg34NdwpbZv7Dt0Hq1yzlkNgUNb9R0XGET
# /BIpIuYYcNdmBUEVebMydndrzY8UDq0KC+e35OADSGkg6B6ZNwYaoungCb2gy6hM
# WCcv+3UATb/oF7HoPmh1+f1MzUZENAdmDtddXOCvWBZQReByKR7eFZLUHR+yBODH
# dVP9zOkPfrm8XVG4fSYhb/4BPK4XhBlibFsxxwOohTttTNHA5ew=
# =J74B
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 26 Jul 2023 04:59:52 AM PDT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [undefined]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-20230726-pull-request' of https://gitlab.com/juan.quintela/qemu: (25 commits)
migration/rdma: Split qemu_fopen_rdma() into input/output functions
qemu-file: Make qemu_file_get_error_obj() static
qemu-file: Simplify qemu_file_shutdown()
qemu_file: Make qemu_file_is_writable() static
migration: Change qemu_file_transferred to noflush
qemu-file: Rename qemu_file_transferred_ fast -> noflush
qtest/migration-tests.c: use "-incoming defer" for postcopy tests
migration: enforce multifd and postcopy preempt to be set before incoming
migration: Update error description whenever migration fails
docs/migration: Update postcopy bits
migration: skipped field is really obsolete.
migration-test: machine_opts is really arch specific
migration-test: Create arch_opts
migration-test: Make machine_opts regular with other options
migration-test: Be consistent for ppc
migration: Extend query-migrate to provide dirty page limit info
migration: Implement dirty-limit convergence algo
migration: Put the detection logic before auto-converge checking
migration: Refactor auto-converge capability logic
migration: Introduce dirty-limit capability
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since commit a937b6aa73 (qapi: Reformat doc comments to conform to
current conventions), a number of comments not conforming to the
current formatting conventions were added. No problem, just sweep
the entire documentation once more.
To check the generated documentation does not change, I compared the
generated HTML before and after this commit with "wdiff -3". Finds no
differences. Comparing with diff is not useful, as the reflown
paragraphs are visible there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20230720071610.1096458-7-armbru@redhat.com>
trace-event-set-state's explanation of how events are selected is
under "Features". Doesn't belong there. Simply delete it, as it
feels redundant with documentation of member @name.
trace-event-get-state's explanation is under "Returns". Tolerable,
but similarly redundant. Delete it, too.
Cc: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20230720071610.1096458-5-armbru@redhat.com>
The notes section comes out like this:
Notes
Additional arguments depend on the type.
1. For detailed information about this command, please refer to the
‘docs/qdev-device-use.txt’ file.
2. It’s possible to list device properties by running QEMU with the
“-device DEVICE,help” command-line argument, where DEVICE is the
device’s name
The first item isn't numbered. Fix that:
1. Additional arguments depend on the type.
2. For detailed information about this command, please refer to the
‘docs/qdev-device-use.txt’ file.
3. It’s possible to list device properties by running QEMU with the
“-device DEVICE,help” command-line argument, where DEVICE is the
device’s name
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20230720071610.1096458-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Examples come out like
Example
set new histograms for all io types with intervals [0, 10), [10,
50), [50, 100), [100, +inf):
The sentence "set new histograms ..." starts with a lower case letter.
Capitalize it. Same for the other examples.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20230720071610.1096458-3-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Documentation for member @bin comes out like
list of io request counts corresponding to histogram intervals.
len("bins") = len("boundaries") + 1 For the example above, "bins"
may be something like [3, 1, 5, 2], and corresponding histogram
looks like:
Note how the equation and the sentence following it run together.
Replace the equation:
list of io request counts corresponding to histogram intervals,
one more element than "boundaries" has. For the example above,
"bins" may be something like [3, 1, 5, 2], and corresponding
histogram looks like:
Cc: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20230720071610.1096458-2-armbru@redhat.com>
[Off by one fixed]
This is how everything else in QEMUFile is structured.
As a bonus they are three less lines of code.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230530183941.7223-17-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It was not used outside of qemu_file.c anyways.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230530183941.7223-21-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It is not used outside of qemu_file, and it shouldn't.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230530183941.7223-19-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We do a qemu_fclose() just after that, that also does a qemu_fflush(),
so remove one qemu_fflush().
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230530183941.7223-3-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Fast don't say much. Noflush indicates more clearly that it is like
qemu_file_transferred but without the flush.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230530183941.7223-2-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The Postcopy preempt capability is expected to be set before incoming
starts, so change the postcopy tests to start with deferred incoming and
call migrate-incoming after the cap has been set.
Why the existing tests (without this patch) didn't fail?
There could be two reasons:
1) "backlog" specifies the number of pending connections. As long as the
server accepts the connections faster than the clients side connecting,
connection will succeed. For the preempt test, it uses only 2 channels,
so very likely to not have pending connections.
2) per my tests (on kernel 6.2), the number of pending connections allowed
is actually "backlog + 1", which is 2 in this case.
That said, the implementation of socket_start_incoming_migration_internal
expects "migrate defer" to be used, and for safety, change the test to
work with the expected usage.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230606101910.20456-3-wei.w.wang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
qemu_start_incoming_migration needs to check the number of multifd
channels or postcopy ram channels to configure the backlog parameter (i.e.
the maximum length to which the queue of pending connections for sockfd
may grow) of listen(). So enforce the usage of postcopy-preempt and
multifd as below:
- need to use "-incoming defer" on the destination; and
- set_capability and set_parameter need to be done before migrate_incoming
Otherwise, disable the use of the features and report error messages to
remind users to adjust the commands.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230606101910.20456-2-wei.w.wang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
There are places in migration.c where the migration is marked failed with
MIGRATION_STATUS_FAILED, but the failure reason is never updated. Hence
libvirt doesn't know why the migration failed when it queries for it.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Tejus GK <tejus.gk@nutanix.com>
Message-ID: <20230621130940.178659-2-tejus.gk@nutanix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We have postcopy recovery but not reflected in the document, do an update
for that.
Add a very small section on postcopy preempt.
Touch up the pagemap section, dropping the unsent map because it's already
been dropped in the source code in commit 1e7cf8c323 ("migration/postcopy:
unsentmap is not necessary for postcopy").
Touch up the postcopy section to remove "network connection" failures as
downside, because now it's not fatal and can be recovered. Suggested by
Laszlo.
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230706115611.371048-1-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Has return zero for more than 10 years.
Specifically we introduced the field in 1.5.0
commit f1c72795af
Author: Peter Lieven <pl@kamp.de>
Date: Tue Mar 26 10:58:37 2013 +0100
migration: do not sent zero pages in bulk stage
during bulk stage of ram migration if a page is a
zero page do not send it at all.
the memory at the destination reads as zero anyway.
even if there is an madvise with QEMU_MADV_DONTNEED
at the target upon receipt of a zero page I have observed
that the target starts swapping if the memory is overcommitted.
it seems that the pages are dropped asynchronously.
this patch also updates QMP to return the number of
skipped pages in MigrationStats.
but removed its usage in 1.5.3
commit 9ef051e553
Author: Peter Lieven <pl@kamp.de>
Date: Mon Jun 10 12:14:19 2013 +0200
Revert "migration: do not sent zero pages in bulk stage"
Not sending zero pages breaks migration if a page is zero
at the source but not at the destination. This can e.g. happen
if different BIOS versions are used at source and destination.
It has also been reported that migration on pseries is completely
broken with this patch.
This effectively reverts commit f1c72795af.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20230612193344.3796-2-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
And it needs to be in both source and target, so put it on arch_opts.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230608224943.3877-7-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This will contain the options needed for both source and target.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230608224943.3877-6-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It makes no sense that we don't have the same configuration on both sides.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-ID: <20230608224943.3877-2-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Extend query-migrate to provide throttle time and estimated
ring full time with dirty-limit capability enabled, through which
we can observe if dirty limit take effect during live migration.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-ID: <168733225273.5845.15871826788879741674-8@git.sr.ht>
Signed-off-by: Juan Quintela <quintela@redhat.com>
