errno has been overwritten by dup2() just below qemu_daemon() and thus
improperly returned to the caller. Fix accordingly.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20230717145544.194786-5-den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: reorder patch series]
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit e6df58a5578fee7a50bbf36f4a50a2781cff855d
Author: Hanna Reitz <hreitz@redhat.com>
Date: Wed May 8 23:18:18 2019 +0200
qemu-nbd: Do not close stderr
has introduced an interesting regression. Original behavior of
ssh somehost qemu-nbd /home/den/tmp/file -f raw --fork
was the following:
* qemu-nbd was started as a daemon
* the command execution is done and ssh exited with success
The patch has changed this behavior and 'ssh' command now hangs forever.
According to the normal specification of the daemon() call, we should
endup with STDERR pointing to /dev/null. That should be done at the
very end of the successful startup sequence when the pipe to the
bootstrap process (used for diagnostics) is no longer needed.
This could be achived in the same way as done for 'qemu-nbd -c' case.
That was commit 0eaf453e, also fixing up e6df58a5. STDOUT copying to
STDERR does the trick.
This also leads to proper 'ssh' connection closing which fixes my
original problem.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
CC: Hanna Reitz <hreitz@redhat.com>
CC: <qemu-stable@nongnu.org>
Message-ID: <20230717145544.194786-3-den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are going to pass additional flag inside next patch.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
CC: <qemu-stable@nongnu.org>
Message-ID: <20230717145544.194786-2-den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
* Fix LMUL check to use VLEN
* Fix typo field in NUMA error_report
* check priv_ver before auto-enable zca/zcd/zcf
* Fix disas output of upper immediates
* tidy CPU firmware section
-----BEGIN PGP SIGNATURE-----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=MOsI
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230719-1' of https://github.com/alistair23/qemu into staging
Fourth RISC-V PR for 8.1
* Fix LMUL check to use VLEN
* Fix typo field in NUMA error_report
* check priv_ver before auto-enable zca/zcd/zcf
* Fix disas output of upper immediates
* tidy CPU firmware section
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmS3akMACgkQr3yVEwxT
# gBPQ/BAArrieEkrRco3tIQJFZqTLfII28M0cYdwN+gjMAkL6RlauCh5yKkc+gsGy
# bhhpr0AE+EzrjKfJgdyMQe2ZH08WEpoAfJHAmLTSm2ktgIlnDAjyJtVksZ3FSwfG
# MRK3v0CChyOav3EfDZzK9jcaXeaSSfjCIG8JW3enoZxf2TnpoXlsCIQdRTnMw7Um
# C73BWoOGOfixFehywHBnkkAPo/nkQPofELrRKNTlefAIsH1RcgYw+s3IgCIuYxJN
# zCjM1y6ye1aiaQhKcNJiLoiP4Eq2R6vUuL8RKWkXqTP3QBZUqKMPnRVgI+W0qRAj
# 9DS+l37zMdxytovQ4gmIqnENT8ty9bholOtWM8nI54subJBplQhkRednG3RBFYjH
# hqbsakcHfE1lyyNI7WoBpO8UMtnOad6eBNmMOM48VduSdNuBZN3ksoRVomnJTlCY
# nq1ZdteywHEZ3uBqk3k/4yzKH+jLj0McPz5FswxsMIGScVjd6H8rMYmM95r1He4k
# YTJ8GwnOTBs1tFxOz5DaM3BVfq5hrzB0SbpDHMOdQHNXnqkyfvSd/QWeXfnY09Ux
# kbNvSpzjn7wWRSP7s4KMcTmas4oGtPS2dheREB/gmoC1ubrfuhbzduDNXJt+omuC
# GDcn9cpouyE/Vp/358PuEe1gW9GFMH0CbYBJ66P0hI/76iPfwLY=
# =MOsI
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 19 Jul 2023 05:44:51 BST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20230719-1' of https://github.com/alistair23/qemu:
target/riscv: Fix LMUL check to use VLEN
hw/riscv: Fix typo field in error_report
target/riscv/cpu.c: check priv_ver before auto-enable zca/zcd/zcf
riscv/disas: Fix disas output of upper immediates
docs/system/target-riscv.rst: tidy CPU firmware section
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 2fda0726e514 ("hw/nvme: fix missing endian conversions for
doorbell buffers"), we fixed shadow doorbells for big-endian guests
running on little endian hosts. But I did not fix little-endian guests
on big-endian hosts. Fix this.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1765
Fixes: 3f7fe8de3d49 ("hw/nvme: Implement shadow doorbell buffer support")
Cc: qemu-stable@nongnu.org
Reported-by: Thomas Huth <thuth@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The previous check was failing with:
VLEN=128 ELEN = 64 SEW = 16 and LMUL = 1/8 which is a
valid combination.
Fix the check to allow valid combinations when VLEN is a multiple of
ELEN.
From the specification:
"In general, the requirement is to support LMUL ≥ SEWMIN/ELEN, where
SEWMIN is the narrowest supported SEW value and ELEN is the widest
supported SEW value. In the standard extensions, SEWMIN=8. For standard
vector extensions with ELEN=32, fractional LMULs of 1/2 and 1/4 must be
supported. For standard vector extensions with ELEN=64, fractional LMULs
of 1/2, 1/4, and 1/8 must be supported." Elsewhere in the specification
it makes clear that VLEN>=ELEN.
From inspection this new check allows:
VLEN=ELEN=64 1/2, 1/4, 1/8 for SEW >=8
VLEN=ELEN=32 1/2, 1/4 for SEW >=8
Fixes: d9b7609a1fb2 ("target/riscv: rvv-1.0: configure instructions")
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230718131316.12283-2-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"smp.cpus" means the number of online CPUs and "smp.max_cpus" means the
total number of CPUs.
riscv_numa_get_default_cpu_node_id() checks "smp.cpus" and the
"available CPUs" description in the next error message also indicates
online CPUs.
So report "smp.cpus" in error_report() instand of "smp.max_cpus".
Since "smp.cpus" is "unsigned int", use "%u".
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230718080712.503333-1-zhao1.liu@linux.intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit bd30559568 made changes in how we're checking and disabling
extensions based on env->priv_ver. One of the changes was to move the
extension disablement code to the end of realize(), being able to
disable extensions after we've auto-enabled some of them.
An unfortunate side effect of this change started to happen with CPUs
that has an older priv version, like sifive-u54. Starting on commit
2288a5ce43e5 we're auto-enabling zca, zcd and zcf if RVC is enabled,
but these extensions are priv version 1.12.0. When running a cpu that
has an older priv ver (like sifive-u54) the user is spammed with
warnings like these:
qemu-system-riscv64: warning: disabling zca extension for hart 0x0000000000000000 because privilege spec version does not match
qemu-system-riscv64: warning: disabling zcd extension for hart 0x0000000000000000 because privilege spec version does not match
The warnings are part of the code that disables the extension, but in this
case we're throwing user warnings for stuff that we enabled on our own,
without user intervention. Users are left wondering what they did wrong.
A quick 8.1 fix for this nuisance is to check the CPU priv spec before
auto-enabling zca/zcd/zcf. A more appropriate fix will include a more
robust framework that will account for both priv_ver and user choice
when auto-enabling/disabling extensions, but for 8.1 we'll make it do
with this simple check.
It's also worth noticing that this is the only case where we're
auto-enabling extensions based on a criteria (in this case RVC) that
doesn't match the priv spec of the extensions we're enabling. There's no
need for more 8.1 band-aids.
Cc: Conor Dooley <conor@kernel.org>
Fixes: 2288a5ce43e5 ("target/riscv: add cfg properties for Zc* extension")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Message-Id: <20230717154141.60898-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The GNU assembler produces the following output for instructions
with upper immediates:
00002597 auipc a1,0x2
000024b7 lui s1,0x2
6409 lui s0,0x2 # c.lui
The immediate operands of upper immediates are not shifted.
However, the QEMU disassembler prints them shifted:
00002597 auipc a1,8192
000024b7 lui s1,8192
6409 lui s0,8192 # c.lui
The current implementation extracts the immediate bits and shifts the by 12,
so the internal representation of the immediate is the actual immediate.
However, the immediates are later printed using rv_fmt_rd_imm or
rv_fmt_rd_offset, which don't undo the shift.
Let's fix this by using specific output formats for instructions
with upper immediates, that take care of the shift.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230711075051.1531007-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This is how the content of the "RISC-V CPU firmware" section is
displayed after the html is generated:
"When using the sifive_u or virt machine there are three different
firmware boot options: 1. -bios default - This is the default behaviour
if no -bios option is included. (...) 3. -bios <file> - Tells QEMU to
load the specified file as the firmware."
It's all in the same paragraph, in a numbered list, and no special
formatting for the options.
Tidy it a bit by adding line breaks between items and its description.
Remove the numbered list. And apply formatting for the options cited in
the middle of the text.
Cc: qemu-trivial@nongnu.org
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230712143728.383528-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
qemu-user crashes immediately when running static binaries on the armhf
architecture. The problem is the memory layout where the executable is
loaded before the interpreter library, in which case the reserved brk
region clashes with the interpreter code and is released before qemu
tries to start the program.
At load time qemu calculates a brk value for interpreter and executable
each. The fix is to choose the higher one of both.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Andreas Schwab <schwab@suse.de>
Cc: qemu-stable@nongnu.org
Reported-by: Venkata.Pyla@toshiba-tsip.com
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1040981
The old_mmap syscall (e.g. on i386) hands over the parameters in
a struct. Adjust the strace output to print the correct values.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: John Reiser <jreiser@BitWagon.com>
Closes: https://gitlab.com/qemu-project/qemu/-/issues/1760
Fix the math overflow when calculating the new_malloc_size.
new_host_brk_page and brk_page are unsigned integers. If userspace
reduces the heap, new_host_brk_page is lower than brk_page which results
in a huge positive number (but should actually be negative).
Fix it by adding a proper check and as such make the code more readable.
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: "Markus F.X.J. Oberhumer" <markus@oberhumer.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Fixes: 86f04735ac ("linux-user: Fix brk() to release pages")
Cc: qemu-stable@nongnu.org
Buglink: https://github.com/upx/upx/issues/683
Since commit 86f04735ac ("linux-user: Fix brk() to release pages") it's
possible for userspace applications to reduce their memory footprint by
calling brk() with a lower address and free up memory. Before that commit
guest heap memory was never unmapped.
But the Linux kernel prohibits to reduce brk() below the initial memory
address which is set at startup by the set_brk() function in binfmt_elf.c.
Such a range check was missed in commit 86f04735ac.
This patch adds the missing check by storing the initial brk value in
initial_target_brk and verify any new brk addresses against that value.
Tested with the i386 upx binary from
https://github.com/upx/upx/releases/download/v4.0.2/upx-4.0.2-i386_linux.tar.xz
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: "Markus F.X.J. Oberhumer" <markus@oberhumer.com>
Fixes: 86f04735ac ("linux-user: Fix brk() to release pages")
Cc: qemu-stable@nongnu.org
Buglink: https://github.com/upx/upx/issues/683
The qemu brk() implementation is too aggressive and cleans remaining bytes
on the current page above the last brk address.
But some existing applications are buggy and read/write bytes above their
current heap address. On a phyiscal machine this does not trigger a
runtime error as long as the access happens on the same page. Additionally
the Linux kernel allocates only full pages and does no zeroing on already
allocated pages, even if the brk address is lowered.
Fix qemu to behave the same way as the kernel does. Do not touch already
allocated pages, and - when running with different page sizes of guest and
host - zero out only those memory areas where the host page size is bigger
than the guest page size.
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: "Markus F.X.J. Oberhumer" <markus@oberhumer.com>
Fixes: 86f04735ac ("linux-user: Fix brk() to release pages")
Cc: qemu-stable@nongnu.org
Buglink: https://github.com/upx/upx/issues/683
The test fails occasionally, see e.g.:
https://gitlab.com/thuth/qemu/-/jobs/4196177756#L489https://gitlab.com/thuth/qemu/-/jobs/4623296271#L290
It also fails on my laptop in ca. 50% of all runs. Thus disable it by
default by using the QEMU_TEST_FLAKY_TESTS environment variable to fence
it (which we also already use in flaky qtests). While we're at it, also
document this variable in docs/devel/testing.rst.
Message-Id: <20230710170155.7192-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Get an up-to-date package list from lcitool, that way we
don't need to manually keep this array in sync.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Inspired-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230711144922.67491-5-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add the get_qemu_packages_from_lcitool_json() helper which return
such package list from a lcitool env var file in JSON format.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230711144922.67491-4-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Refresh the generated files by running:
$ make lcitool-refresh
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230711144922.67491-3-philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[thuth: Drop changes to libpmem-dev and libxen-dev]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add the generate_pkglist() helper to generate a list of packages
required by a distribution to build QEMU.
Since we can not add a "THIS FILE WAS AUTO-GENERATED" comment in
JSON, create the files under tests/vm/generated/ sub-directory;
add a README mentioning the files are generated.
Suggested-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230711144922.67491-2-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This wasn't noticed because the test is currently disabled.
Fixes: 02f56e3de ("tests/qtest: massively speed up migration-test")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230711212131.2370-1-farosas@suse.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
elf_hwcap_str() takes a bit number, but compares it for equality with
the HWCAP_S390_* masks. This causes /proc/cpuinfo to display incorrect
hwcaps.
Fix by introducing the HWCAP_S390_NR_* constants and using them in
elf_hwcap_str() instead of the HWCAP_S390_*. While at it, add the
missing nnpa, pcimio and sie hwcaps from the latest kernel.
Output before:
features : esan3 zarch stfle msa
Output after:
features : esan3 zarch stfle msa ldisp eimm etf3eh highgprs vx vxe
Fixes: e19807bee357 ("linux-user/elfload: Introduce elf_hwcap_str() on s390x")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230627151356.273259-1-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If QEMU is built with --without-default-devices, the s390-flic-kvm
device is missing and QEMU aborts when started with the KVM accelerator.
Make sure it's available by selecting S390_FLIC_KVM in Kconfig.
Consequently, this also fixes an abort in tests/qtest/migration-test.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20230711151440.716822-1-clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
blk_io_plug_call() is invoked outside a blk_io_plug()/blk_io_unplug()
section while opening the NVMe drive from:
nvme_file_open() ->
nvme_init() ->
nvme_identify() ->
nvme_admin_cmd_sync() ->
nvme_submit_command() ->
blk_io_plug_call()
blk_io_plug_call() immediately invokes the given callback when the
current thread is not plugged, as is the case during nvme_file_open().
Unfortunately, nvme_submit_command() calls blk_io_plug_call() with
q->lock still held:
...
q->sq.tail = (q->sq.tail + 1) % NVME_QUEUE_SIZE;
q->need_kick++;
blk_io_plug_call(nvme_unplug_fn, q);
qemu_mutex_unlock(&q->lock);
^^^^^^^^^^^^^^^^^^^^^^^^^^^
nvme_unplug_fn() deadlocks trying to acquire q->lock because the lock is
already acquired by the same thread. The symptom is that QEMU hangs
during startup while opening the NVMe drive.
Fix this by moving the blk_io_plug_call() outside q->lock. This is safe
because no other thread runs code related to this queue and
blk_io_plug_call()'s internal state is immune to thread safety issues
since it is thread-local.
Reported-by: Lukáš Doktor <ldoktor@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Lukas Doktor <ldoktor@redhat.com>
Message-id: 20230712191628.252806-1-stefanha@redhat.com
Fixes: f2e590002bd6 ("block/nvme: convert to blk_io_plug_call() API")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Follow PulseAudio backend comment and code, and only implement the
channels QEMU actually supports at this point, and add the same comment
about limits and future mappings. Simplify a bit the code.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20230506163735.3481387-13-marcandre.lureau@redhat.com>
Skip refresh if a new dmabuf (guest scanout frame) has already been
submitted and ready to be drawn because the scanout will be updated
with new frame anyway.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230706183355.29361-2-dongwon.kim@intel.com>
Setting scanout mode is better to be done very last minute
right because the mode can be reset anytime after it is set in
dpy_gl_scanout_texture by any asynchronouse dpy_refresh call,
which eventually cancels drawing of the guest scanout texture.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230706183355.29361-1-dongwon.kim@intel.com>
Replace 'width' and 'height' in QemuDmaBuf with 'backing_widht'
and 'backing_height' as these commonly indicate the size of the
whole surface (e.g. guest's Xorg extended display). Then use
'width' and 'height' for sub region in there (e.g. guest's
scanouts).
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230713040444.32267-1-dongwon.kim@intel.com>
The primary guest scanout shows the booting screen right after reboot
but additional guest displays (i.e. max_ouptuts > 1) will keep displaying
the old frames until the guest virtio gpu driver gets initialized, which
could cause some confusion. A better way is to to replace the surface with
a place holder that tells the display is not active during the reset of
virtio-gpu device.
And to immediately update the surface with the place holder image after
the switch, displaychangelistener_gfx_switch needs to be called with
'update == TRUE' in dpy_gfx_replace_surface when the new surface is NULL.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230627224451.11739-1-dongwon.kim@intel.com>
Observed a wrong context is bound when changing the scanout mode.
To prevent problem, it is needed to make sure to bind the right
context in gtk_egl_set_scanout_mode/gtk_gl_area_set_scanout_mode
as well as unbind one in the end of gd_egl_update/gd_gl_area_update.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230628191504.17185-1-dongwon.kim@intel.com>
A wrong exit condition may lead to an infinite loop when inflating a
valid zlib buffer containing some extra bytes in the `inflate_buffer`
function. The bug only occurs post-authentication. Return the buffer
immediately if the end of the compressed data has been reached
(Z_STREAM_END).
Fixes: CVE-2023-3255
Fixes: 0bf41cab ("ui/vnc: clipboard support")
Reported-by: Kevin Denis <kevin.denis@synacktiv.com>
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230704084210.101822-1-mcascell@redhat.com>
Commit 9462ff4695aa0 ("virtio-gpu/win32: allocate shareable 2d
resources/images") introduces a division, which can lead to crashes when
"height" is 0.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1744
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Add a check in the bit-set operation to write the backstore
only if the affected bit is 0 before.
With this in place, there will be no need for callers to
do the checking in order to avoid unnecessary writes.
Signed-off-by: Tong Ho <tong.ho@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
