This is a 10/100 ethernet device that has several features.
Only the ones needed by the Linux driver have been implemented.
See npcm7xx_emc.c for a list of unimplemented features.
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Doug Evans <dje@google.com>
Message-id: 20210218212453.831406-3-dje@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This PR is a collection of RISC-V patches:
- Improvements to SiFive U OTP
- Upgrade OpenSBI to v0.9
- Support the QMP dump-guest-memory
- Add support for the SiFive SPI controller (sifive_u)
- Initial RISC-V system documentation
- A fix for the Goldfish RTC
- MAINTAINERS updates
- Support for high PCIe memory in the virt machine
-----BEGIN PGP SIGNATURE-----
iQEyBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmBA8k8ACgkQIeENKd+X
cFRRMgf41R7Zn1ZSB9GHL3WgLDTPqpT4FAMpTnYRD7wPdspawl1SsHWBgaLNmJWk
dwSLhvHMM44pOVCQRqdkiRrp5t5fDEm6gdRKyNn5uzWFMn7ibYIjmg7OE+79onbN
VES4yTJwuskD/7JRNcrW6RytKRgzKs2au8NxxgtgXprSF0nM9wCu70z4T9XkLfjQ
cpJUUaUCw628uUic/nObTxMnaiEmq/C0qU9SRRKPYVRp7jceCsHMVRazqOgdM6uf
foNHi/uCNKy6I841+D8Po7h57s51LtT78JDRRVRPfWY+SRQyC5l8Eq3UtRPyg39p
7hhkiAKhG4rs8iCXKvMvTz0S//Cx
=BVLq
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20210304' into staging
RISC-V PR for 6.0
This PR is a collection of RISC-V patches:
- Improvements to SiFive U OTP
- Upgrade OpenSBI to v0.9
- Support the QMP dump-guest-memory
- Add support for the SiFive SPI controller (sifive_u)
- Initial RISC-V system documentation
- A fix for the Goldfish RTC
- MAINTAINERS updates
- Support for high PCIe memory in the virt machine
# gpg: Signature made Thu 04 Mar 2021 14:44:31 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-20210304:
hw/riscv: virt: Map high mmio for PCIe
hw/riscv: virt: Limit RAM size in a 32-bit system
hw/riscv: virt: Drop the 'link_up' parameter of gpex_pcie_init()
hw/riscv: Drop 'struct MemmapEntry'
MAINTAINERS: Add a SiFive machine section
goldfish_rtc: re-arm the alarm after migration
docs/system: riscv: Add documentation for sifive_u machine
docs/system: Add RISC-V documentation
docs/system: Sort targets in alphabetical order
hw/riscv: sifive_u: Change SIFIVE_U_GEM_IRQ to decimal value
hw/riscv: sifive_u: Add QSPI2 controller and connect an SD card
hw/riscv: sifive_u: Add QSPI0 controller and connect a flash
hw/ssi: Add SiFive SPI controller support
hw/block: m25p80: Add various ISSI flash information
hw/block: m25p80: Add ISSI SPI flash support
target-riscv: support QMP dump-guest-memory
roms/opensbi: Upgrade from v0.8 to v0.9
hw/misc: sifive_u_otp: Use error_report() when block operation fails
target/riscv: Declare csr_ops[] with a known size
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds detailed documentation for RISC-V `sifive_u` machine,
including the following information:
- Supported devices
- Hardware configuration information
- Boot options
- Machine-specific options
- Running Linux kernel
- Running VxWorks kernel
- Running U-Boot, and with an alternate configuration
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Message-id: 20210126060007.12904-10-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add RISC-V system emulator documentation for generic information.
`Board-specific documentation` and `RISC-V CPU features` are only
a placeholder and will be added in the future.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-9-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-8-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
On Linux, the 'security.capability' xattr holds a set of
capabilities that can change when an executable is run, giving
a limited form of privilege escalation to those programs that
the writer of the file deemed worthy.
Any write causes the 'security.capability' xattr to be dropped,
stopping anyone from gaining privilege by modifying a blessed
file.
Fuse relies on the daemon to do this dropping, and in turn the
daemon relies on the host kernel to drop the xattr for it. However,
with the addition of -o xattrmap, the xattr that the guest
stores its capabilities in is now not the same as the one that
the host kernel automatically clears.
Where the mapping changes 'security.capability', explicitly clear
the remapped name to preserve the same behaviour.
This bug is assigned CVE-2021-20263.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
This has the following visible changes:
- GBM is required only for OpenGL dma-buf.
- X11 is explicitly required by gtk-egl.
- EGL is now mandatory for the OpenGL displays.
The last one needs some detailed description. Before this change,
EGL was tested only for OpenGL dma-buf with the check of
EGL_MESA_image_dma_buf_export. However, all of the OpenGL
displays depend on EGL and EGL_MESA_image_dma_buf_export is always
defined by epoxy's EGL interface.
Therefore, it makes more sense to always check the presence of EGL
and say the OpenGL displays are available along with OpenGL dma-buf
if it is present.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20210223060307.87736-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* target/i386: Add bus lock debug exception support (Chenyi)
* update documentation for preferred boolean option syntax (Daniel)
* make SCSI io_timeout configurable (Hannes)
* fix handling of guest recoverable SCSI errors (myself)
* misc fixes (Pavel, Zheng Zhan Liang, Zihao)
* fix installation of binaries with entitlements (Akihiko)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmA3tzQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMsngf+OkbgTDouxq3qnn1K89n6j2wKlAj0
qPP+57o1sv5u5MjX0BkawXCMJfvTKJaOt/Cs8S0FaPTehfR5H0T2tL76KZBEdlEP
/+V3EC0Qmd1S47LKIOuDkV15szvnccyjpgwaL7Osjb0Eh0SxeXd4pBTc3yYtkacu
zb/srZ63U2iJZr93QwGmEJjuW57WNym6QWXF3Mrg9PFXybkXFTGumB2vZMlQc+MN
RWPTUKZKAiIr/HfdvpIETXY+HzJhylvIQ8OVWtM3XDorl48OWcOat/jyeNEVYgG3
o+gxIRnfvIL+42GkmUFbOKLzT5SV6p9EYYGLTuE1kU7nc6HWoD0CdPxA3A==
=UBVO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* fix --enable-fuzzing linker failures (Alexander)
* target/i386: Add bus lock debug exception support (Chenyi)
* update documentation for preferred boolean option syntax (Daniel)
* make SCSI io_timeout configurable (Hannes)
* fix handling of guest recoverable SCSI errors (myself)
* misc fixes (Pavel, Zheng Zhan Liang, Zihao)
* fix installation of binaries with entitlements (Akihiko)
# gpg: Signature made Thu 25 Feb 2021 14:41:56 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream: (29 commits)
tcg/i386: rdpmc: fix the the condtions
chardev: do not use short form boolean options in non-QemuOpts character device descriptions
vl: deprecate -writeconfig
target/i386: Add bus lock debug exception support
qom/object.c: Fix typo
target/i386: update to show preferred boolean syntax for -cpu
docs: update to show preferred boolean syntax for -cpu
docs: update to show preferred boolean syntax for -vnc
docs: update to show preferred boolean syntax for -chardev
qemu-options: update to show preferred boolean syntax for -vnc
qemu-options: update to show preferred boolean syntax for -incoming
qemu-options: update to show preferred boolean syntax for -netdev
qemu-options: update to show preferred boolean syntax for -spice
qemu-options: update to show preferred boolean syntax for -chardev
gdbstub: use preferred boolean option syntax
char: don't fail when client is not connected
scsi: drop 'result' argument from command_complete callback
scsi-disk: pass guest recoverable errors through even for rerror=stop
scsi-disk: pass SCSI status to scsi_handle_rw_error
scsi: introduce scsi_sense_from_errno()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The functionality of -writeconfig is limited and the code
does not even try to detect cases where it prints incorrect
syntax (for example if values have a quote in them, since
qemu_config_parse does not support any kind of escaping)
so remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"+foo" or "-foo"
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-10-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"foo" or "nofoo".
The on|off syntax has been supported since -vnc switched to use
QemuOpts in commit 4db14629c3
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-9-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"foo" or "nofoo".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-8-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no particular reason to keep this on it's own in the root of
the tree. Move it into the rest of the fine developer manual and fixup
any links to it. The only tweak I've made is to fix the code-block
annotations to mention the language C.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210223095931.16908-1-alex.bennee@linaro.org>
For completeness reference the check-tcg tests in the container
preamble text.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Message-Id: <20210222101455.12640-7-alex.bennee@linaro.org>
This section has grown a little stale so clean-up the language and
examples for current usage:
- refer to containers at the top
- mention podman can also be used
- add podman prerequisites section
- move to using "docker-help" for online help
- mention the registry and it's purpose
- don't refer to out-of-date min-glib image
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210222101455.12640-6-alex.bennee@linaro.org>
Expand on the usage of containers for building tests and why we have
some that are not used to build QEMU itself.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Message-Id: <20210222101455.12640-5-alex.bennee@linaro.org>
This is a plugin intended to help with profiling access to various
bits of system hardware. It only really makes sense for system
emulation.
It takes advantage of the recently exposed helper API that allows us
to see the device name (memory region name) associated with a device.
You can specify arg=read or arg=write to limit the tracking to just
reads or writes (by default it does both).
The pattern option:
-plugin ./tests/plugin/libhwprofile.so,arg=pattern
will allow you to see the access pattern to devices, eg:
gic_cpu @ 0xffffffc010040000
off:00000000, 8, 1, 8, 1
off:00000000, 4, 1, 4, 1
off:00000000, 2, 1, 2, 1
off:00000000, 1, 1, 1, 1
The source option:
-plugin ./tests/plugin/libhwprofile.so,arg=source
will track the virtual source address of the instruction making the
access:
pl011 @ 0xffffffc010031000
pc:ffffffc0104c785c, 1, 4, 0, 0
pc:ffffffc0104c7898, 1, 4, 0, 0
pc:ffffffc010512bcc, 2, 1867, 0, 0
You cannot mix source and pattern.
Finally the match option allow you to limit the tracking to just the
devices you care about.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20210213130325.14781-4-alex.bennee@linaro.org>
This commit implements the single-byte mode of the SMBus.
Each Nuvoton SoC has 16 System Management Bus (SMBus). These buses
compliant with SMBus and I2C protocol.
This patch implements the single-byte mode of the SMBus. In this mode,
the user sends or receives a byte each time. The SMBus device transmits
it to the underlying i2c device and sends an interrupt back to the QEMU
guest.
Reviewed-by: Doug Evans<dje@google.com>
Reviewed-by: Tyrong Ting<kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Message-id: 20210210220426.3577804-2-wuhaotsh@google.com
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit e2bbc4eaa7 we changed the QAPI modules to name the built-in
module "./builtin" rather than None, but forgot to update the Sphinx
plugin. The effect of this was that when the plugin generated a dependency
file it was including a bogus dependency on a non-existent file named
"builtin", which meant that ninja would run Sphinx and rebuild all
the documentation every time even if nothing had changed.
Update the plugin to use the new name of the builtin module.
Fixes: e2bbc4eaa7
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Message-id: 20210212161311.28915-1-peter.maydell@linaro.org
The 'Quick Start' section of the userspace emulator documentation is
very old and outdated. In particular:
- it suggests running x86-on-x86 emulation, which is the least
interesting possible use case
- it recommends that users download tarballs of guest binaries
from the QEMU web page which we no longer provide there
There's nothing salvageable here; delete it all.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20201122000131.18487-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The float-access functions stfl_*, stfq*, ldfl* and ldfq* are now
unused; remove them. (Accesses to float64 and float32 types can be
made with the ldl/stl/ldq/stq functions, as float64 and float32 are
guaranteed to be typedefs for normal integer types.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210208113428.7181-6-peter.maydell@linaro.org>
Message-Id: <20210211122750.22645-15-alex.bennee@linaro.org>
The travis container that we have no longer matches what travis
currently uses. As all x86 jobs are being moved to GitLab CI too,
there is no compelling reason to update the travis container. It
is simpler to just remove it.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210209135011.1224992-2-berrange@redhat.com>
Message-Id: <20210211122750.22645-9-alex.bennee@linaro.org>
This gives us better feature parity with QMP nbd-server-start, where
max-connections defaults to 0 for unlimited.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210209152759.209074-3-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Original specification says that l1 table size if 64 * l1_size, which
is obviously wrong. The size of the l1 entry is 64 _bits_, not bytes.
Thus 64 is to be replaces with 8 as specification says about bytes.
There is also minor tweak, field name is renamed from l1 to l1_table,
which matches with the later text.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20210128171313.2210947-1-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[Replace the original commit message "docs: fix mistake in dirty bitmap
feature description" as suggested by Eric Blake.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Adds documentation explaining the command-line arguments needed
to use multi-process.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 49f757a84e5dd6fae14b22544897d1124c5fdbad.1611938319.git.jag.raman@oracle.com
[Move orphan docs/multi-process.rst document into docs/system/ and add
it to index.rst to prevent Sphinx "document isn't included in any
toctree" error.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 02a68adef99f5df6a380bf8fd7b90948777e411c.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tests added:
- Armbian 20.08 on Orange Pi PC (Philippe)
- MPC8544ds machine (Thomas)
- Virtex-ml507 ppc machine (Thomas)
- Re-enable the microblaze test (Thomas)
Various fixes and documentation improvements from Cleber.
-----BEGIN PGP SIGNATURE-----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=mUpx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/integration-testing-20210208' into staging
Integration testing patches
Tests added:
- Armbian 20.08 on Orange Pi PC (Philippe)
- MPC8544ds machine (Thomas)
- Virtex-ml507 ppc machine (Thomas)
- Re-enable the microblaze test (Thomas)
Various fixes and documentation improvements from Cleber.
# gpg: Signature made Mon 08 Feb 2021 20:19:12 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/integration-testing-20210208:
Acceptance Tests: remove unnecessary tag from documentation example
Acceptance tests: clarify ssh connection failure reason
tests/acceptance/virtiofs_submounts: required space between IP and port
tests/acceptance/virtiofs_submounts: standardize port as integer
tests/acceptance/virtiofs_submounts: use a virtio-net device instead
tests/acceptance/virtiofs_submounts: do not ask for ssh key password
tests/acceptance/virtiofs_submounts: use workdir property
tests/acceptance/boot_linux: rename misleading cloudinit method
tests/acceptance/boot_linux: fix typo on cloudinit error message
tests/acceptance: Re-enable the microblaze test
tests/acceptance: Add a test for the virtex-ml507 ppc machine
tests/acceptance: Test the mpc8544ds machine
tests/acceptance: Move the pseries test to a separate file
tests/acceptance: Test U-Boot/Linux from Armbian 20.08 on Orange Pi PC
tests/acceptance: Extract do_test_arm_orangepi_armbian_uboot() method
tests/acceptance: Introduce tesseract_ocr() helper
tests/acceptance: Extract tesseract_available() helper in new namespace
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The "🥑 enable" is not necessary and was removed in 9531d26c,
so let's remove from the docs.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210203172357.1422425-4-crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
No sense outputting the qemu-ga and qemu-ga-ref man pages when the guest
agent binary itself is disabled. This mirrors behaviour from before the
meson switch.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Message-Id: <20210128145801.14384-1-s.reiter@proxmox.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson's "static" argument to cc.find_library is a tri-state. By default
Meson *prefers* a shared library, which basically means using -l to
look for it; instead, "static: false" *requires* a shared library. Of
course, "static: true" requires a static library, which is all good
for --enable-static builds.
For --disable-static, "static: false" is rarely desirable; it does not
match what the configure script used to do and the test is more complex
(and harder to debug if it fails, which was reported by Peter Lieven
for librbd).
Reported-by: Peter Lieven <pl@kamp.de>
Tested-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20210117230924.449676-3-alxndr@bu.edu>
- increase timeout on replay kernel acceptance test
- fixes for binfmt_misc docker images
- better gdb version detection
- don't silently skip gdb tests
- fix for gdbstub auxv handling
- cleaner handling of check-tcg on tcg disabled builds
- expand vexpress/versitile docs with examples
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmAhHIMACgkQ+9DbCVqe
KkS/gwf+OeN1OxOqn7kdhOvbTx2k0XAxOEN/lC47xeVIpGBmC08jA7o/+mfy3aLK
xCGYpK7LkW06KYEZ3r3ojxph5dbR16TcqououM0Z5YrQ0A/wuMX7E9l27Ndr209c
jt67z/8ZSXwnA93bttFrqYwIcYqGdfdx/cQFi/hyWGZytBBbwM+OWPkwwiklUPSu
AnmC/K4LowItr3yifu1E1ppgbLsVGu/xX2t/Et/7CTnYngMSr3Zb9ZhdgfTsBuZ3
JzMw990VR0OuslTg8t+563lYvBboCqu6WbV3WIas7XT41JC97KygCj+IuyZjV039
2DQ0t723o9B05UFFrZaJJFXs1Kb+/A==
=4zok
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-gdbstub-docs-080221-1' into staging
Testing, gdbstub and doc tweaks:
- increase timeout on replay kernel acceptance test
- fixes for binfmt_misc docker images
- better gdb version detection
- don't silently skip gdb tests
- fix for gdbstub auxv handling
- cleaner handling of check-tcg on tcg disabled builds
- expand vexpress/versitile docs with examples
# gpg: Signature made Mon 08 Feb 2021 11:12:03 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-gdbstub-docs-080221-1:
docs/system: document an example booting the versatilepb machine
docs/system: document an example vexpress-a15 invocation
tests/Makefile.include: don't use TARGET_DIRS for check-tcg
scripts/mtest2make.py: export all-%s-targets variable and use it
tests/tcg: Replace /bin/true by true (required on macOS)
gdbstub: Fix handle_query_xfer_auxv
tests/tcg: don't silently skip the gdb tests
configure: bump the minimum gdb version for check-tcg to 9.1
configure: make version_ge more tolerant of shady version input
tests/docker: add a docker-exec-copy-test
tests/docker: alias docker-help target for consistency
tests/docker: preserve original name when copying libs
tests/docker: make _copy_with_mkdir accept missing files
tests/docker: Fix typo in help message
tests/docker: Fix _get_so_libs() for docker-binfmt-image
tests/acceptance: Increase the timeout in the replay tests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a bit more out there including Aurelien's excellent write up
and older Debian images here:
https://www.aurel32.net/info/debian_arm_qemu.phphttps://people.debian.org/~aurel32/qemu/armel/
However the web is transitory and git is forever so lets add something
to the fine manual.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20210202134001.25738-16-alex.bennee@linaro.org>
The wiki and the web are curiously absent of the right runes to boot a
vexpress model so I had to work from first principles to work it out.
Use the more modern -drive notation so alternative backends can be
used (unlike the hardwired -sd mode).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Message-Id: <20210202134001.25738-15-alex.bennee@linaro.org>
At least some s390 cpu models support "Protected Virtualization" (PV),
a mechanism to protect guests from eavesdropping by a compromised
hypervisor.
This is similar in function to other mechanisms like AMD's SEV and
POWER's PEF, which are controlled by the "confidential-guest-support"
machine option. s390 is a slightly special case, because we already
supported PV, simply by using a CPU model with the required feature
(S390_FEAT_UNPACK).
To integrate this with the option used by other platforms, we
implement the following compromise:
- When the confidential-guest-support option is set, s390 will
recognize it, verify that the CPU can support PV (failing if not)
and set virtio default options necessary for encrypted or protected
guests, as on other platforms. i.e. if confidential-guest-support
is set, we will either create a guest capable of entering PV mode,
or fail outright.
- If confidential-guest-support is not set, guests might still be
able to enter PV mode, if the CPU has the right model. This may be
a little surprising, but shouldn't actually be harmful.
To start a guest supporting Protected Virtualization using the new
option use the command line arguments:
-object s390-pv-guest,id=pv0 -machine confidential-guest-support=pv0
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Some upcoming POWER machines have a system called PEF (Protected
Execution Facility) which uses a small ultravisor to allow guests to
run in a way that they can't be eavesdropped by the hypervisor. The
effect is roughly similar to AMD SEV, although the mechanisms are
quite different.
Most of the work of this is done between the guest, KVM and the
ultravisor, with little need for involvement by qemu. However qemu
does need to tell KVM to allow secure VMs.
Because the availability of secure mode is a guest visible difference
which depends on having the right hardware and firmware, we don't
enable this by default. In order to run a secure guest you need to
create a "pef-guest" object and set the confidential-guest-support
property to point to it.
Note that this just *allows* secure guests, the architecture of PEF is
such that the guest still needs to talk to the ultravisor to enter
secure mode. Qemu has no direct way of knowing if the guest is in
secure mode, and certainly can't know until well after machine
creation time.
To start a PEF-capable guest, use the command line options:
-object pef-guest,id=pef0 -machine confidential-guest-support=pef0
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Now that we've implemented a generic machine option for configuring various
confidential guest support mechanisms:
1. Update docs/amd-memory-encryption.txt to reference this rather than
the earlier SEV specific option
2. Add a docs/confidential-guest-support.txt to cover the generalities of
the confidential guest support scheme
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
They have been deprecated since QEMU v5.0, time to remove them now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210203171832.483176-2-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210127144734.2367693-1-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Check that -device nvdimm,unarmed=on is used when -object
memory-backend-file,readonly=on and document that -device
nvdimm,unarmed=on|off controls whether the NVDIMM appears read-only to
the guest.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20210104171320.575838-4-stefanha@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The documentation still refers to the makefile and the old sub-directory
layout. Meson works differently: tracetool output is placed into the
builddir with mangled filenames like <builddir>/trace/trace-accel_kvm.h
for the accel/kvm/ trace.h definition.
This meson setup also requires a manually-created accel/kvm/trace.h file
that #includes the <builddir>/trace/trace-accel_kvm.h file. Document
this!
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20210112165859.225534-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It is possible to repeat the --trace option to specify multiple
patterns. This may be preferrable to users who do not want to create a
file with a list of patterns.
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210112165859.225534-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Timestamps in tracing output can be distracting. Make it possible to
control tid/timestamp printing with -msg timestamp=on|off. The default
is no tid/timestamps. Previously they were always printed.
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210125113507.224287-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The "simple" backend is actually more complicated to use than the "log"
backend. Update the quickstart documentation to feature the "log"
backend instead of the "simple" backend.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201216160923.722894-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is a simple rST conversion of the documentation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20201216160923.722894-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The simpletrace documentation section was accidentally split when the
ftrace section was introduced. Move the simpletrace-specific
documentation back into the simpletrace section.
Fixes: e64dd5efb2 ("trace: document ftrace backend")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20201216160923.722894-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
to allow improved control over use of git submodules
* Deprecate the -enable-fips option
* Ensure docs use prefer format for bool options
* Clarify platform support rules
* Misc fixes to keymap conversions
* Fix misc problems on macOS
-----BEGIN PGP SIGNATURE-----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=g6bC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange-gitlab/tags/misc-fixes-pull-request' into staging
* Replace --enable/disable-git-update with --with-git-submodules
to allow improved control over use of git submodules
* Deprecate the -enable-fips option
* Ensure docs use prefer format for bool options
* Clarify platform support rules
* Misc fixes to keymap conversions
* Fix misc problems on macOS
# gpg: Signature made Fri 29 Jan 2021 17:10:13 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange-gitlab/tags/misc-fixes-pull-request:
tests: Replace deprecated ASN1 code
tests: Fix runtime error in test-authz-pam
ui: update keycodemapdb submodule commit
crypto: Add spaces around operator
configure: replace --enable/disable-git-update with --with-git-submodules
docs: fix missing backslash in certtool shell example
docs: simplify and clarify the platform support rules
Prefer 'on' | 'off' over 'yes' | 'no' for bool options
os: deprecate the -enable-fips option and QEMU's FIPS enforcement
crypto: Fix memory leaks in set_loaded for tls-*
crypto: Forbid broken unloading of secrets
crypto: Move USER_CREATABLE to secret_common base class
crypto: Fix some code style problems, add spaces around operator
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The distinction between short life and long life Linux distributions
turned out to be redundant. They can both be covered in a simple way
by noting support will target the current release, and the previous
release for a period of two years or until its EOL. This rule can also
apply to the other UNIX based distros, leaving only Windows needing a
different set of rules.
This also clarifies that Debian LTS is out of scope, because the LTS
support is provided by a separate group from the main Debian maintainer
team.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Update some docs and test cases to use 'on' | 'off' as the preferred
value for bool options.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The -enable-fips option was added a long time ago to prevent the use of
single DES when VNC when FIPS mode is enabled. It should never have been
added, because apps are supposed to unconditionally honour FIPS mode
based on the '/proc/sys/crypto/fips_enabled' file contents.
In addition there is more to achieving FIPS compliance than merely
blocking use of certain algorithms. Those algorithms which are used
need to perform self-tests at runtime.
QEMU's built-in cryptography provider has no support for self-tests,
and neither does the nettle library.
If QEMU is required to be used in a FIPS enabled host, then it must be
built with the libgcrypt library enabled, which will unconditionally
enforce FIPS compliance in any algorithm usage.
Thus there is no need to keep either the -enable-fips option in QEMU, or
QEMU's internal FIPS checking methods.
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add a function for checking whether a clock has a source. This is
useful for devices which have input clocks that must be wired up by
the board as it allows them to fail in realize rather than ploughing
on with a zero-period clock.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-3-peter.maydell@linaro.org
Message-id: 20210121190622.22000-3-peter.maydell@linaro.org
Add pvpanic PCI device support details in docs/specs/pvpanic.txt.
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add PCI interface support for PVPANIC device. Create a new file pvpanic-pci.c
where the PCI specific routines reside and update the build system with the new
files and config structure.
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add secure pl061 for reset/power down machine from
the secure world (Arm Trusted Firmware). Connect it
with gpio-pwr driver.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
[PMM: Added mention of the new device to the documentation]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Fix crash on write to read-only devices
- iotests: Rewrite 'check' in Python, get rid of 'groups' and allow
non-numeric test case names
-----BEGIN PGP SIGNATURE-----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=gFsg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Fix crash on write to read-only devices
- iotests: Rewrite 'check' in Python, get rid of 'groups' and allow
non-numeric test case names
# gpg: Signature made Wed 27 Jan 2021 19:56:00 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
iotests: rename and move 169 and 199 tests
iotests: rewrite check into python
iotests: add testrunner.py
iotests: add testenv.py
iotests: add findtests.py
iotests: 146: drop extra whitespaces from .out file
virtio-scsi-test: Test writing to scsi-cd device
block: Separate blk_is_writable() and blk_supports_write_perm()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add python script with new logic of searching for tests:
Current ./check behavior:
- tests are named [0-9][0-9][0-9]
- tests must be registered in group file (even if test doesn't belong
to any group, like 142)
Behavior of findtests.py:
- group file is dropped
- tests are all files in tests/ subdirectory (except for .out files),
so it's not needed more to "register the test", just create it with
appropriate name in tests/ subdirectory. Old names like
[0-9][0-9][0-9] (in root iotests directory) are supported too, but
not recommended for new tests
- groups are parsed from '# group: ' line inside test files
- optional file group.local may be used to define some additional
groups for downstreams
- 'disabled' group is used to temporary disable tests. So instead of
commenting tests in old 'group' file you now can add them to
disabled group with help of 'group.local' file
- selecting test ranges like 5-15 are not supported more
(to support restarting failed ./check command from the middle of the
process, new argument is added: --start-from)
Benefits:
- no rebase conflicts in group file on patch porting from branch to
branch
- no conflicts in upstream, when different series want to occupy same
test number
- meaningful names for test files
For example, with digital number, when some person wants to add some
test about block-stream, he most probably will just create a new
test. But if there would be test-block-stream test already, he will
at first look at it and may be just add a test-case into it.
And anyway meaningful names are better.
This commit doesn't update check behavior (which will be done in
further commit), still, the documentation changed like new behavior is
already here. Let's live with this small inconsistency for the
following few commits, until final change.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210125185056.129513-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Documented under the "Acceptance tests using the Avocado Framework"
section in testing.rst how environment variables are used to skip tests.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210115210022.417996-1-wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Options such as "server" or "nowait", that are commonly found in -chardev,
are sugar for "server=on" and "wait=off". This is quite surprising and
also does not have any notion of typing attached. It is even possible to
do "-device e1000,noid" and get a device with "id=off".
Deprecate it and print a warning when it is encountered. In general,
this short form for boolean options only seems to be in wide use for
-chardev and -spice.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The HMP command \"change vnc TARGET\" is messy:
- it takes an ugly shortcut to determine if the option has an "id",
with incorrect results if "id=" is not preceded by an unescaped
comma.
- it deletes the existing QemuOpts and does not try to rollback
if the parsing fails (which is not causing problems, but only due to
how VNC options are parsed)
- because it uses the same parsing function as "-vnc", it forces
the latter to not support "-vnc help".
On top of this, it uses a deprecated QMP command, thus getting in
the way of removing the QMP command. Since the usecase for the
command is not clear, just remove it and send "change vnc password"
directly to the QMP "change-vnc-password" command.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210120144235.345983-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we first converted our documentation to Sphinx, we split it into
multiple manuals (system, interop, tools, etc), which are all built
separately. The primary driver for this was wanting to be able to
avoid shipping the 'devel' manual to end-users. However, this is
working against the grain of the way Sphinx wants to be used and
causes some annoyances:
* Cross-references between documents become much harder or
possibly impossible
* There is no single index to the whole documentation
* Within one manual there's no links or table-of-contents info
that lets you easily navigate to the others
* The devel manual doesn't get published on the QEMU website
(it would be nice to able to refer to it there)
Merely hiding our developer documentation from end users seems like
it's not enough benefit for these costs. Combine all the
documentation into a single manual (the same way that the readthedocs
site builds it) and install the whole thing. The previous manual
divisions remain as the new top level sections in the manual.
* The per-manual conf.py files are no longer needed
* The man_pages[] specifications previously in each per-manual
conf.py move to the top level conf.py
* docs/meson.build logic is simplified as we now only need to run
Sphinx once for the HTML and then once for the manpages5B
* The old index.html.in that produced the top-level page with
links to each manual is no longer needed
Unfortunately this means that we now have to build the HTML
documentation into docs/manual in the build tree rather than directly
into docs/; otherwise it is too awkward to ensure we install only the
built manual and not also the dependency info, stamp file, etc. The
manual still ends up in the same place in the final installed
directory, but anybody who was consulting documentation from within
the build tree will have to adjust where they're looking.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210115154449.4801-1-peter.maydell@linaro.org
The crypto overhead of emulating pauth can be significant for
some workloads. Add two boolean properties that allows the
feature to be turned off, on with the architected algorithm,
or on with an implementation defined algorithm.
We need two intermediate booleans to control the state while
parsing properties lest we clobber ID_AA64ISAR1 into an invalid
intermediate state.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210111235740.462469-3-richard.henderson@linaro.org
[PMM: fixed docs typo, tweaked text to clarify that the impdef
algorithm is specific to QEMU]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'fulong2e' machine alias has been marked as deprecated since
QEMU v5.1 (commit c3a09ff68d, the machine is renamed 'fuloong2e').
Time to remove it now.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20210106184602.3771551-1-f4bug@amsat.org>
The PWM module is part of NPCM7XX module. Each NPCM7XX module has two
identical PWM modules. Each module contains 4 PWM entries. Each PWM has
two outputs: frequency and duty_cycle. Both are computed using inputs
from software side.
This module does not model detail pulse signals since it is expensive.
It also does not model interrupts and watchdogs that are dependant on
the detail models. The interfaces for these are left in the module so
that anyone in need for these functionalities can implement on their
own.
The user can read the duty cycle and frequency using qom-get command.
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210108190945.949196-5-wuhaotsh@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ADC is part of NPCM7XX Module. Its behavior is controled by the
ADC_CON register. It converts one of the eight analog inputs into a
digital input and stores it in the ADC_DATA register when enabled.
Users can alter input value by using qom-set QMP command.
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210108190945.949196-4-wuhaotsh@google.com
[PMM: Added missing hw/adc/trace.h file]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 1982e1602d we added a new qemu-storage-daemon(1) manpage.
At the moment new manpages have to be listed both in the conf.py for
Sphinx and also in docs/meson.build for Meson. We forgot the second
of those -- correct the omission.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20210108161416.21129-2-peter.maydell@linaro.org
This adds the target guide for SABRE Lite board, and documents how
to boot a Linux kernel and U-Boot bootloader.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20210106063504.10841-5-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It's common to want to print a human-readable indication of a clock's
frequency. Provide a utility function in the clock API to return a
string which is a displayable representation of the frequency,
and use it in qdev-monitor.c.
Before:
(qemu) info qtree
[...]
dev: xilinx,zynq_slcr, id ""
clock-in "ps_clk" freq_hz=3.333333e+07
mmio 00000000f8000000/0000000000001000
After:
dev: xilinx,zynq_slcr, id ""
clock-in "ps_clk" freq_hz=33.3 MHz
mmio 00000000f8000000/0000000000001000
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201215150929.30311-5-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Remove the now-unused clock_get_ns() API and the CLOCK_PERIOD_TO_NS()
macro that only it was using.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201215150929.30311-4-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The clock_get_ns() API claims to return the period of a clock in
nanoseconds. Unfortunately since it returns an integer and a
clock's period is represented in units of 2^-32 nanoseconds,
the result is often an approximation, and calculating a clock
expiry deadline by multiplying clock_get_ns() by a number-of-ticks
is unacceptably inaccurate.
Introduce a new API clock_ticks_to_ns() which returns the number
of nanoseconds it takes the clock to make a given number of ticks.
This function can do the complete calculation internally and
will thus give a more accurate result.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201215150929.30311-2-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The tracetool.py script writes to stdout. This means the output filename
is not available to the script. Add the output filename to the
command-line so that the script has access to the filename.
This also simplifies the tracetool.py invocation. It's no longer
necessary to use meson's custom_build(capture : true) to save output.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200827142915.108730-2-stefanha@redhat.com>
Build the array of command line arguments coming from config_host
once for all targets. Add all accelerators to accel/Kconfig so
that the command line arguments for accelerators can be computed
easily in the existing "foreach sym: accelerators" loop.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Document how to compile with CFI and how to maintain CFI-safe code
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-Id: <20201204230615.2392-6-dbuono@linux.vnet.ibm.com>
[Make build system section in index.rst and add the new file. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAl/dynUSHGFybWJydUBy
ZWRoYXQuY29tAAoJEDhwtADrkYZT3igP/3bWwsKR5vKVsDUTmMfrhcgaFvQiaYoG
F29Bond8Xy0Zd0gl7OWh/5jKL0vGlrEVPrKfYLUjMnfkeRec/pOkIB2oOmIxpnPs
9zi4kh2hQ3dEoRBuvSnnZzedetYPTuCpWMIjlztkgfxgcimqm8TPNVSxRaSApjC3
Y8108wGwBWVf2C0rhKO9E2xA51uo6khy05i1psUtqUlC+PuDQ/OwzQHM2dnWdDB6
kUwBDK17nhL6WwsYqCyKLSiDModReYfDiY8GS5MDLo74dzwXiatEefCR7+sbM4xq
eX/SBoqoeS1jLPNuCryNeGNKvNA2KAbEJTnbQA2NxBXHgZ9/1SxVZFxuPp4nDMSQ
N7BDuDI8YtJE479RjT/ZzRG65xadGBSe/HXkXM9mZwh1zitop8SVZ9fArFBHvNzw
Y5zAv3fQd54+87psffg4dYFK0wGmqTabLEEuVzM8KIVqcAdYA2yC2b2EHy+vsxuq
GMkr0WaA6Sq2gthXmzdTjmUPuHdan/NIhuV6d66SbPNH2oH31piptFxuznyFWSKV
isciFFdUrkg5QrF8DSt2nmdwMFf8QGbszqP8QIGMzhJCCS9GXIiGG8f149++q8X8
HO1lFAdLQJdrDwCYmfx36tOvi2rS/rcoTGgvg66UX3xKko1ruoxR1ZWcS54obJN6
vEQDZ+PxubDg
=vGLy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-12-19' into staging
QAPI patches patches for 2020-12-19
# gpg: Signature made Sat 19 Dec 2020 09:40:05 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2020-12-19: (33 commits)
qobject: Make QString immutable
block: Use GString instead of QString to build filenames
keyval: Use GString to accumulate value strings
json: Use GString instead of QString to accumulate strings
migration: Replace migration's JSON writer by the general one
qobject: Factor JSON writer out of qobject_to_json()
qobject: Factor quoted_str() out of to_json()
qobject: Drop qstring_get_try_str()
qobject: Drop qobject_get_try_str()
Revert "qobject: let object_property_get_str() use new API"
block: Avoid qobject_get_try_str()
qmp: Fix tracing of non-string command IDs
qobject: Move internals to qobject-internal.h
hw/rdma: Replace QList by GQueue
Revert "qstring: add qstring_free()"
qobject: Change qobject_to_json()'s value to GString
qobject: Use GString instead of QString to accumulate JSON
qobject: Make qobject_to_json_pretty() take a pretty argument
monitor: Use GString instead of QString for output buffer
hmp: Simplify how qmp_human_monitor_command() gets output
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- New block filter: preallocate (which, on writes beyond an image file's
end, allocates big chunks of data so that such post-EOF writes will
occur less frequently)
- write-zeroes and block-status support for Quorum
- Implementation of truncate for the nvme block driver similarly to the
existing implementations for host block devices and iscsi devices
- Block layer refactoring: Drop the tighten_restrictions concept in the
block permission functions
- iotest fixes
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl/cwIoSHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9AnvMH+gOnZCwEUKWuBxGX3Wjb/kqV1OuhAhcP
IVrKLRnqdarCYMQ9M4SZL6pedfsujHA7vClTV7NTrenXBsEIradBQ59ztQ0oDirS
4ipIjVtNqj7m86l+IRZDq5HlwOYwwFnWogmLo2bcmNJGLpPQQfrhL2vRJ1wLgFYk
WjeAVlkkYcHnTIDvs4ne9WRSlxGVBWJ4X5nSlRdZqeyUcMY9v4wL4P9Wc4ZuORmq
/5HRcT5JKGaT2bAueaqAGEdtPFGbazEP5uU7MTTK/fueDKIRAXO2d0gqhANtOOJQ
7hMmKhwOPOOhrrpCVi9nxsVwdCOHfurV0km6cOs+Iprm/Wm2UtuS/A8=
=z+7k
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-12-18' into staging
Block patches:
- New block filter: preallocate (which, on writes beyond an image file's
end, allocates big chunks of data so that such post-EOF writes will
occur less frequently)
- write-zeroes and block-status support for Quorum
- Implementation of truncate for the nvme block driver similarly to the
existing implementations for host block devices and iscsi devices
- Block layer refactoring: Drop the tighten_restrictions concept in the
block permission functions
- iotest fixes
# gpg: Signature made Fri 18 Dec 2020 14:45:30 GMT
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2020-12-18: (30 commits)
iotests: Fix _send_qemu_cmd with bash 5.1
iotests/102: Pass $QEMU_HANDLE to _send_qemu_cmd
block/nvme: Implement fake truncate() coroutine
quorum: Implement bdrv_co_pwrite_zeroes()
quorum: Implement bdrv_co_block_status()
scripts/simplebench: add bench_prealloc.py
simplebench/results_to_text: make executable
simplebench/results_to_text: add difference line to the table
simplebench/results_to_text: improve view of the table
simplebench: move results_to_text() into separate file
simplebench: rename ascii() to results_to_text()
scripts/simplebench: use standard deviation for +- error
scripts/simplebench: support iops
scripts/simplebench: fix grammar: s/successed/succeeded/
iotests: add 298 to test new preallocate filter driver
iotests.py: execute_setup_common(): add required_fmts argument
iotests: qemu_io_silent: support --image-opts
qemu-io: add preallocate mode parameter for truncate command
block: introduce preallocate filter
block: bdrv_check_perm(): process children anyway
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Add qemu-storage-daemon documentation
- hw/block/nand: Decommission the NAND museum
- vpc: Clean up some buffer abuse
- nfs: fix int overflow in nfs_client_open_qdict
- Several iotests fixes
-----BEGIN PGP SIGNATURE-----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=yLZI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Add qemu-storage-daemon documentation
- hw/block/nand: Decommission the NAND museum
- vpc: Clean up some buffer abuse
- nfs: fix int overflow in nfs_client_open_qdict
- Several iotests fixes
# gpg: Signature made Fri 18 Dec 2020 12:07:30 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
block/vpc: Use sizeof() instead of HEADER_SIZE for footer size
block/vpc: Pass footer buffers as VHDFooter * instead of uint8_t *
block/vpc: Pad VHDFooter, replace uint8_t[] buffers
block/vpc: Use sizeof() instead of 1024 for dynamic header size
block/vpc: Pad VHDDynDiskHeader, replace uint8_t[] buffers
block/vpc: Make vpc_checksum() take void *
block/vpc: Don't abuse the footer buffer for dynamic header
block/vpc: Don't abuse the footer buffer as BAT sector buffer
block/vpc: Make vpc_open() read the full dynamic header
iotests:172: use _filter_qom_path
iotests: make _filter_qom_path more strict
MAINTAINERS: add Kevin Wolf as storage daemon maintainer
docs: add qemu-storage-daemon(1) man page
docs: generate qemu-storage-daemon-qmp-ref(7) man page
block/nfs: fix int overflow in nfs_client_open_qdict
hw/block/nand: Decommission the NAND museum
iotests/210: Fix reference output
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
HMP cleanups
Migration fixes
Note the change in behaviour of not allowing a postmigrate migrtion
rather than crashing
Virtiofsd cleanups and fixes
--thread-pool-size=0 for no thread pool (faster for some workloads)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=8Hmk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20201218a' into staging
Monitor, virtiofsd and migration pull
HMP cleanups
Migration fixes
Note the change in behaviour of not allowing a postmigrate migrtion
rather than crashing
Virtiofsd cleanups and fixes
--thread-pool-size=0 for no thread pool (faster for some workloads)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Fri 18 Dec 2020 10:39:37 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20201218a:
migration: Don't allow migration if vm is in POSTMIGRATE
savevm: Delete snapshots just created in case of error
savevm: Remove dead code in save_snapshot()
docs/devel/migration: Improve debugging section a bit
virtiofsd: Remove useless code about send_notify_iov
virtiofsd: update FUSE_FORGET comment on "lo_inode.nlookup"
virtiofsd: Check file type in lo_flush()
virtiofsd: Disable posix_lock hash table if remote locks are not enabled
virtiofsd: Set up posix_lock hash table for root inode
virtiofsd: make the debug log timestamp on stderr more human-readable
virtiofsd: Use --thread-pool-size=0 to mean no thread pool
hmp-commands.hx: List abbreviation after command for cont, quit, print
monitor:Don't use '#' flag of printf format ('%#') in format strings
monitor:braces {} are necessary for all arms of this statement
monitor:open brace '{' following struct go on the same line
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
It's intended to be inserted between format and protocol nodes to
preallocate additional space (expanding protocol file) on writes
crossing EOF. It improves performance for file-systems with slow
allocation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201021145859.11201-9-vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
[mreitz: Two comment fixes, and bumped the version from 5.2 to 6.0]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Document the qemu-storage-daemon tool. Most of the command-line options
are identical to their QEMU counterparts. Perhaps Sphinx hxtool
integration could be extended to extract documentation for individual
command-line options so they can be shared. For now the
qemu-storage-daemon simply refers to the qemu(1) man page where the
command-line options are identical.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201209103802.350848-3-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Although individual qemu-storage-daemon QMP commands are identical to
QEMU QMP commands, qemu-storage-daemon only supports a subset of QEMU's
QMP commands. Generate a manual page of just the commands supported by
qemu-storage-daemon so that users know exactly what is available in
qemu-storage-daemon.
Add an h1 heading in storage-daemon/qapi/qapi-schema.json so that
block-core.json is at the h2 heading level.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201209103802.350848-2-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix typos, and make the example work out of the box.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201217071450.701909-1-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
linux-user binaries are displayed altogether. Use the '*'
character to force displaying them as bullet list (one list
per architecture).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20201119160838.1981709-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The default configuration path /etc/qemu can be overriden with configure
options, and the generated documentation used to reflect it.
Fixes regression introduced in commit
f8aa24ea9a ("meson: sphinx-build").
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1902537
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201201183704.299697-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It has been marked as deprecated since QEMU v5.0, replaced by the
corresponding parameter of the -display option.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201210155808.233895-5-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It has been marked as deprecated since QEMU v4.2, replaced by
the -overcommit option. Time to remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201210155808.233895-4-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Otherwise there is a chance that new deprecated features get added
to the list of removed features at the end of the file by accident.
It's way less confusing if the removed features reside in a separate
file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201210155808.233895-3-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The '-tb-size' option (replaced by '-accel tcg,tb-size') is
deprecated since 5.0 (commit fe17413247). Remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201202112714.1223783-1-philmd@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201210155808.233895-2-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This property has been deprecated since QEMU 5.0 by commit 22062e54bb.
We only kept a legacy hack that internally converts "compat" into the
official "max-cpu-compat" property of the pseries machine type.
According to our deprecation policy, we could have removed it for QEMU 5.2
already. Do it now ; since ppc_cpu_parse_featurestr() now just calls the
generic parent_parse_features handler, drop it as well.
Users are supposed to use the "max-cpu-compat" property of the pseries
machine type instead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201201131103.897430-1-groug@kaod.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This reverts commit fd68a72875cf318f4310726f842139119c5f45d5. We're
done with the update of kernel-doc and we can restore kernel-doc's
functionality.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When kernel-doc is called via kerneldoc.py, there's no need to
auto-detect the Sphinx version, as the Sphinx module already
knows it. So, add an optional parameter to allow changing the
Sphinx dialect.
As kernel-doc can also be manually called, keep the auto-detection
logic if the parameter was not specified. On such case, emit
a warning if sphinx-build can't be found at PATH.
I ended using a suggestion from Joe for using a more readable
regex, instead of using a complex one with a hidden group like:
m/^(\d+)\.(\d+)(?:\.?(\d+)?)/
in order to get the optional <patch> argument.
Thanks-to: Joe Perches <joe@perches.com>
Suggested-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-23-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 152d1967f6.
We will replace the commit with the fix from Linux.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201117165312.118257-16-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Preserve bisectability while we update scripts/kernel-doc from Linux.
Without this patch, building with Sphinx 3 would break while we
revert our own Sphinx 3 support and replace it with Linux's.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201023151923.3243652-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the example of add qmp hello-world example.
Without ":", make will report error:
../qapi/misc.json:573:2: line should end with ':'
Signed-off-by: Zihao Chang <changzihao1@huawei.com>
Message-Id: <20201201143308.1626-1-changzihao1@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Adds bit #4 to status/control field of CPU hotplug MMIO interface.
New bit will be used OSPM to mark CPUs as pending for removal by firmware,
when it calls _EJ0 method on CPU device node. Later on, when firmware
sees this bit set, it will perform CPU eject which will clear bit #4
as well.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201207140739.3829993-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix a couple of nits in pr-manager.rst:
* the title marker for the top level heading is overlength
* stray capital 'R' in the middle of a sentence
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Split the documentation of the qemu-pr-helper binary into the tools
manual, and give it a manpage like our other standalone executables.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Move the pr-manager documentation into the system manual.
Some of it (the documentation of the pr-manager-helper tool)
should be in tools, but we will split it up after moving it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Now that target-i386.rst has a place to list documentation of
machines other than the 'pc' machine, we have a place we can
move the microvm documentation to.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Currently target-i386.rst includes the documentation of the 'pc'
machine model inline. Split it out into its own file, in a
similar way to target-i386.rst; this gives us a place to put
documentation of other i386 machine models, such as 'microvm'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The virtio-pmem documentation has some minor style issues we hadn't
noticed since we weren't rendering it in our docs:
* Sphinx doesn't complain about overlong title-underlining the
way it complains about too-short underlining, but it looks odd;
make the underlines of section headers the right length
* Indent of paragraphs makes them render as blockquotes;
remove the indent so they just render as normal text
* Leading 'o' isn't rst markup, so it just renders as a literal
"o"; reformat as a subsection heading instead
* "QEMU" in the document title and section headings are a bit
odd and unnecessary since this is the QEMU manual; delete
or rephrase them
* There's no need to specify what QEMU version the device first
appeared in.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
The cpu-hotplug.rst documentation is currently orphan and not
included in any manual; move it into the system manual.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The virtio-net-failover documentation is currently orphan and
not included in any manual; move it into the system manual,
immediately following the general network emulation section.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
List the 'tosa' machine with the XScale-based PDAs models.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201120173953.2539469-5-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Document the 3 front LEDs modeled on the OpenPOWER Witherspoon BMC
(see commit 7cfbde5ea1 "hw/arm/aspeed: Add the 3 front LEDs drived
by the PCA9552 #1").
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201120173953.2539469-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Document the following Raspberry Pi models:
- raspi0 Raspberry Pi Zero (revision 1.2)
- raspi1ap Raspberry Pi A+ (revision 1.1)
- raspi2b Raspberry Pi 2B (revision 1.1)
- raspi3ap Raspberry Pi 3A+ (revision 1.0)
- raspi3b Raspberry Pi 3B (revision 1.2)
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201120173953.2539469-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since commit aa35ec2213 ("hw/arm/raspi: Use more specific
machine names") the raspi2/raspi3 machines have been renamed
as raspi2b/raspi3b.
Note, rather than the raspi3b, the raspi3ap introduced in
commit 5be94252d3 ("hw/arm/raspi: Add the Raspberry Pi 3
model A+") is a closer match to what QEMU models, but only
provides 512 MB of RAM.
As more Raspberry Pi 2/3 models are emulated, in order
to avoid confusion, deprecate the raspi2/raspi3 machine
aliases.
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201120173953.2539469-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The man page does not contain all the chapters from the System Emulation
Users Guide, so some of the links that we've put into the qemu options
descriptions can not be resolved and thus the link names are used in the
man pages instead. These link names currently contain weird "_005f" letters
in the middle and just do not make any sense for the users. To avoid this
situation, replace the link names with more descriptive, natural text.
Message-Id: <20201116145341.91606-1-thuth@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/3
Buglink: https://bugs.launchpad.net/qemu/+bug/1453608
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fix also a similar typo in a code comment.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20201117193448.393472-1-sw@weilnetz.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU currently truncates the mmap_offset field when sending
VHOST_USER_ADD_MEM_REG and VHOST_USER_REM_MEM_REG messages. The struct
layout looks like this:
typedef struct VhostUserMemoryRegion {
uint64_t guest_phys_addr;
uint64_t memory_size;
uint64_t userspace_addr;
uint64_t mmap_offset;
} VhostUserMemoryRegion;
typedef struct VhostUserMemRegMsg {
uint32_t padding;
/* WARNING: there is a 32-bit hole here! */
VhostUserMemoryRegion region;
} VhostUserMemRegMsg;
The payload size is calculated as follows when sending the message in
hw/virtio/vhost-user.c:
msg->hdr.size = sizeof(msg->payload.mem_reg.padding) +
sizeof(VhostUserMemoryRegion);
This calculation produces an incorrect result of only 36 bytes.
sizeof(VhostUserMemRegMsg) is actually 40 bytes.
The consequence of this is that the final field, mmap_offset, is
truncated. This breaks x86_64 TCG guests on s390 hosts. Other guest/host
combinations may get lucky if either of the following holds:
1. The guest memory layout does not need mmap_offset != 0.
2. The host is little-endian and mmap_offset <= 0xffffffff so the
truncation has no effect.
Fix this by extending the existing 32-bit padding field to 64-bit. Now
the padding reflects the actual compiler padding. This can be verified
using pahole(1).
Also document the layout properly in the vhost-user specification. The
vhost-user spec did not document the exact layout. It would be
impossible to implement the spec without looking at the QEMU source
code.
Existing vhost-user frontends and device backends continue to work after
this fix has been applied. The only change in the wire protocol is that
QEMU now sets hdr.size to 40 instead of 36. If a vhost-user
implementation has a hardcoded size check for 36 bytes, then it will
fail with new QEMUs. Both QEMU and DPDK/SPDK don't check the exact
payload size, so they continue to work.
Fixes: f1aeb14b08 ("Transmit vhost-user memory regions individually")
Cc: Raphael Norwitz <raphael.norwitz@nutanix.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201109174355.1069147-1-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: f1aeb14b08 ("Transmit vhost-user memory regions individually")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
We should at least document what this machine is about.
Reviewed-by: Graeme Gregory <graeme@nuviainc.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20201104165254.24822-1-alex.bennee@linaro.org
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Shashi Mallela <shashi.mallela@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[PMM: fixed filename mismatch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a link to the top of the sidebar in every docs page that takes the
user back to the source code in gitlab.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20201102130926.161183-5-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We deprecated the support for the 'r4k' machine for the 5.0 release
(commit d32dc61421), which means that our deprecation policy allows
us to drop it in release 5.2. Remove the code.
To repeat the rationale from the deprecation note:
- this virtual machine has no specification
- the Linux kernel dropped support for it 10 years ago
Users are recommended to use the Malta board instead.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <20201102201311.2220005-1-f4bug@amsat.org>
The warning was printing an empty string if the bad sphinx-build
was not passed on the command line. Instead, always use the
path that was returned by find_program.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=s4KC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/nvme/tags/pull-nvme-20201102' into staging
nvme pull 2 Nov 2020
# gpg: Signature made Mon 02 Nov 2020 15:20:30 GMT
# gpg: using RSA key DBC11D2D373B4A3755F502EC625156610A4F6CC0
# gpg: Good signature from "Keith Busch <kbusch@kernel.org>" [unknown]
# gpg: aka "Keith Busch <keith.busch@gmail.com>" [unknown]
# gpg: aka "Keith Busch <keith.busch@intel.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DBC1 1D2D 373B 4A37 55F5 02EC 6251 5661 0A4F 6CC0
* remotes/nvme/tags/pull-nvme-20201102: (30 commits)
hw/block/nvme: fix queue identifer validation
hw/block/nvme: fix create IO SQ/CQ status codes
hw/block/nvme: fix prp mapping status codes
hw/block/nvme: report actual LBA data shift in LBAF
hw/block/nvme: add trace event for requests with non-zero status code
hw/block/nvme: add nsid to get/setfeat trace events
hw/block/nvme: reject io commands if only admin command set selected
hw/block/nvme: support for admin-only command set
hw/block/nvme: validate command set selected
hw/block/nvme: support per-namespace smart log
hw/block/nvme: fix log page offset check
hw/block/nvme: remove pointless rw indirection
hw/block/nvme: update nsid when registered
hw/block/nvme: change controller pci id
pci: allocate pci id for nvme
hw/block/nvme: support multiple namespaces
hw/block/nvme: refactor identify active namespace id list
hw/block/nvme: add support for sgl bit bucket descriptor
hw/block/nvme: add support for scatter gather lists
hw/block/nvme: harden cmb access
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Sphinx 3.2 is pickier than earlier versions about the option:: markup,
and complains about our usage in qemu-option-trace.rst:
../../docs/qemu-option-trace.rst.inc:4:Malformed option description
'[enable=]PATTERN', should look like "opt", "-opt args", "--opt args",
"/opt args" or "+opt args"
In this file, we're really trying to document the different parts of
the top-level --trace option, which qemu-nbd.rst and qemu-img.rst
have already introduced with an option:: markup. So it's not right
to use option:: here anyway. Switch to a different markup
(definition lists) which gives about the same formatted output.
(Unlike option::, this markup doesn't produce index entries; but
at the moment we don't do anything much with indexes anyway, and
in any case I think it doesn't make much sense to have individual
index entries for the sub-parts of the --trace option.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20201030174700.7204-3-peter.maydell@linaro.org
Allow the server to expose an additional metacontext to be requested
by savvy clients. qemu-nbd adds a new option -A to expose the
qemu:allocation-depth metacontext through NBD_CMD_BLOCK_STATUS; this
can also be set via QMP when using block-export-add.
qemu as client is hacked into viewing the key aspects of this new
context by abusing the already-experimental x-dirty-bitmap option to
collapse all depths greater than 2, which results in a tri-state value
visible in the output of 'qemu-img map --output=json' (yes, that means
x-dirty-bitmap is now a bit of a misnomer, but I didn't feel like
renaming it as it would introduce a needless break of back-compat,
even though we make no compat guarantees with x- members):
unallocated (depth 0) => "zero":false, "data":true
local (depth 1) => "zero":false, "data":false
backing (depth 2+) => "zero":true, "data":true
libnbd as client is probably a nicer way to get at the information
without having to decipher such hacks in qemu as client. ;)
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201027050556.269064-11-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
'qemu-img map' provides a way to determine which extents of an image
come from the top layer vs. inherited from a backing chain. This is
useful information worth exposing over NBD. There is a proposal to
add a QMP command block-dirty-bitmap-populate which can create a dirty
bitmap that reflects allocation information, at which point the
qemu:dirty-bitmap:NAME metadata context can expose that information
via the creation of a temporary bitmap, but we can shorten the effort
by adding a new qemu:allocation-depth metadata context that does the
same thing without an intermediate bitmap (this patch does not
eliminate the need for that proposal, as it will have other uses as
well).
While documenting things, remember that although the NBD protocol has
NBD_OPT_SET_META_CONTEXT, the rest of its documentation refers to
'metadata context', which is a more apt description of what is
actually being used by NBD_CMD_BLOCK_STATUS: the user is requesting
metadata by passing one or more context names. So I also touched up
some existing wording to prefer the term 'metadata context' where it
makes sense.
Note that this patch does not actually enable any way to request a
server to enable this context; that will come in the next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201027050556.269064-10-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Since 'block-export-add' is new to 5.2, we can still tweak the
interface; there, allowing 'bitmaps':['str'] is nicer than
'bitmap':'str'. This wires up the qapi and qemu-nbd changes to permit
passing multiple bitmaps as distinct metadata contexts that the NBD
client may request, but the actual support for more than one will
require a further patch to the server.
Note that there are no changes made to the existing deprecated
'nbd-server-add' command; this required splitting the QAPI type
BlockExportOptionsNbd, which fortunately does not affect QMP
introspection.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201027050556.269064-5-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
- qcow2: Skip copy-on-write when allocating a zero cluster
- qemu-img: add support for rate limit in qemu-img convert/commit
- Fix deadlock when deleting a block node during drain_all
-----BEGIN PGP SIGNATURE-----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=ON5g
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Skip copy-on-write when allocating a zero cluster
- qemu-img: add support for rate limit in qemu-img convert/commit
- Fix deadlock when deleting a block node during drain_all
# gpg: Signature made Tue 27 Oct 2020 15:14:07 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
block: End quiescent sections when a BDS is deleted
qcow2: Skip copy-on-write when allocating a zero cluster
qcow2: Report BDRV_BLOCK_ZERO more accurately in bdrv_co_block_status()
qemu-img: add support for rate limit in qemu-img convert
qemu-img: add support for rate limit in qemu-img commit
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
add support for rate limit in qemu-img convert.
Signed-off-by: Zhengui <lizhengui@huawei.com>
Message-Id: <1603205264-17424-3-git-send-email-lizhengui@huawei.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
add support for rate limit in qemu-img commit.
Signed-off-by: Zhengui <lizhengui@huawei.com>
Message-Id: <1603205264-17424-2-git-send-email-lizhengui@huawei.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The NPCM7xx chips have multiple GPIO controllers that are mostly
identical except for some minor differences like the reset values of
some registers. Each controller controls up to 32 pins.
Each individual pin is modeled as a pair of unnamed GPIOs -- one for
emitting the actual pin state, and one for driving the pin externally.
Like the nRF51 GPIO controller, a gpio level may be negative, which
means the pin is not driven, or floating.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The NPCM730 and NPCM750 chips have a single USB host port shared between
a USB 2.0 EHCI host controller and a USB 1.1 OHCI host controller. This
adds support for both of them.
Testing notes:
* With -device usb-kbd, qemu will automatically insert a full-speed
hub, and the keyboard becomes controlled by the OHCI controller.
* With -device usb-kbd,bus=usb-bus.0,port=1, the keyboard is directly
attached to the port without any hubs, and the device becomes
controlled by the EHCI controller since it's high speed capable.
* With -device usb-kbd,bus=usb-bus.0,port=1,usb_version=1, the
keyboard is directly attached to the port, but it only advertises
itself as full-speed capable, so it becomes controlled by the OHCI
controller.
In all cases, the keyboard device enumerates correctly.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
