Wires up three I2C controller instances to the powernv9 chip
XSCOM address space.
Each controller instance is wired up to a single I2C bus of
its own. No other I2C devices are connected to the buses
at this time.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[milesg: Split wiring from addition of model itself]
[milesg: Added new commit message]
[milesg: Moved hardcoded attributes into PnvChipClass]
[milesg: Removed TODO comment for I2C]
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <20231016222013.3739530-3-milesg@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The more recent IBM power processors have an embedded I2C
controller that is accessible by software via the XSCOM
address space.
Each instance of the I2C controller is capable of controlling
multiple I2C buses (one at a time). Prior to beginning a
transaction on an I2C bus, the bus must be selected by writing
the port number associated with the bus into the PORT_NUM
field of the MODE register. Once an I2C bus is selected,
the status of the bus can be determined by reading the
Status and Extended Status registers.
I2C bus transactions can be started by writing a command to
the Command register and reading/writing data from/to the
FIFO register.
Not supported :
. 10 bit I2C addresses
. Multimaster
. Slave
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[milesg: Split wiring to powernv9 into its own commit]
[milesg: Added more detail to commit message]
[milesg: Added SPDX Licensed Identifier to new files]
[milesg: updated copyright dates]
[milesg: Added use of g_autofree]
[milesg: Added NULL check after pnv_i2c_get_bus]
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <20231016222013.3739530-2-milesg@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The Articia S is a generic chipset supporting several different CPUs
that were among others used on some PPC boards. This is a minimal
emulation of the parts needed for emulating the AmigaOne board.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <83822787431701cf4d460298d3e3845f362e5da1.1698406922.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
virtio sound card support
vhost-user: back-end state migration
cxl:
line length reduction
enabling fabric management
vhost-vdpa:
shadow virtqueue hash calculation Support
shadow virtqueue RSS Support
tests:
CPU topology related smbios test cases
Fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmVKDDoPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpF08H/0Zts8uvkHbgiOEJw4JMHU6/VaCipfIYsp01
GSfwYOyEsXJ7GIxKWaCiMnWXEm7tebNCPKf3DoUtcAojQj3vuF9XbWBKw/bfRn83
nGO/iiwbYViSKxkwqUI+Up5YiN9o0M8gBFrY0kScPezbnYmo5u2bcADdEEq6gH68
D0Ea8i+WmszL891ypvgCDBL2ObDk3qX3vA5Q6J2I+HKX2ofJM59BwaKwS5ghw+IG
BmbKXUZJNjUQfN9dQ7vJuiuqdknJ2xUzwW2Vn612ffarbOZB1DZ6ruWlrHty5TjX
0w4IXEJPBgZYbX9oc6zvTQnbLDBJbDU89mnme0TcmNMKWmQKTtc=
=vEv+
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes
virtio sound card support
vhost-user: back-end state migration
cxl:
line length reduction
enabling fabric management
vhost-vdpa:
shadow virtqueue hash calculation Support
shadow virtqueue RSS Support
tests:
CPU topology related smbios test cases
Fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmVKDDoPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpF08H/0Zts8uvkHbgiOEJw4JMHU6/VaCipfIYsp01
# GSfwYOyEsXJ7GIxKWaCiMnWXEm7tebNCPKf3DoUtcAojQj3vuF9XbWBKw/bfRn83
# nGO/iiwbYViSKxkwqUI+Up5YiN9o0M8gBFrY0kScPezbnYmo5u2bcADdEEq6gH68
# D0Ea8i+WmszL891ypvgCDBL2ObDk3qX3vA5Q6J2I+HKX2ofJM59BwaKwS5ghw+IG
# BmbKXUZJNjUQfN9dQ7vJuiuqdknJ2xUzwW2Vn612ffarbOZB1DZ6ruWlrHty5TjX
# 0w4IXEJPBgZYbX9oc6zvTQnbLDBJbDU89mnme0TcmNMKWmQKTtc=
# =vEv+
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Nov 2023 18:06:50 HKT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (63 commits)
acpi/tests/avocado/bits: enable console logging from bits VM
acpi/tests/avocado/bits: enforce 32-bit SMBIOS entry point
hw/cxl: Add tunneled command support to mailbox for switch cci.
hw/cxl: Add dummy security state get
hw/cxl/type3: Cleanup multiple CXL_TYPE3() calls in read/write functions
hw/cxl/mbox: Add Get Background Operation Status Command
hw/cxl: Add support for device sanitation
hw/cxl/mbox: Wire up interrupts for background completion
hw/cxl/mbox: Add support for background operations
hw/cxl: Implement Physical Ports status retrieval
hw/pci-bridge/cxl_downstream: Set default link width and link speed
hw/cxl/mbox: Add Physical Switch Identify command.
hw/cxl/mbox: Add Information and Status / Identify command
hw/cxl: Add a switch mailbox CCI function
hw/pci-bridge/cxl_upstream: Move defintion of device to header.
hw/cxl/mbox: Generalize the CCI command processing
hw/cxl/mbox: Pull the CCI definition out of the CXLDeviceState
hw/cxl/mbox: Split mailbox command payload into separate input and output
hw/cxl/mbox: Pull the payload out of struct cxl_cmd and make instances constant
hw/cxl: Fix a QEMU_BUILD_BUG_ON() in switch statement scope issue.
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add Xen PV console and network support, the former of which enables the
Xen "PV shim" to be used to support PV guests.
Also clean up the block support and make it work when the user passes
just 'drive file=IMAGE,if=xen' on the command line.
Update the documentation to reflect all of these, taking the opportunity
to simplify what it says about q35 by making unplug work for AHCI.
Ignore the VCPU_SSHOTTMR_future timer flag, and advertise the 'fixed'
per-vCPU upcall vector support, as newer upstream Xen do.
-----BEGIN PGP SIGNATURE-----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=Dg79
-----END PGP SIGNATURE-----
Merge tag 'pull-xenfv.for-upstream-20231107' of git://git.infradead.org/users/dwmw2/qemu into staging
Xen PV guest support for 8.2
Add Xen PV console and network support, the former of which enables the
Xen "PV shim" to be used to support PV guests.
Also clean up the block support and make it work when the user passes
just 'drive file=IMAGE,if=xen' on the command line.
Update the documentation to reflect all of these, taking the opportunity
to simplify what it says about q35 by making unplug work for AHCI.
Ignore the VCPU_SSHOTTMR_future timer flag, and advertise the 'fixed'
per-vCPU upcall vector support, as newer upstream Xen do.
# -----BEGIN PGP SIGNATURE-----
#
# iQJIBAABCAAyFiEEvgfZ/VSAmrLEsP9fY3Ys2mfi81kFAmVJ/7EUHGR3bXcyQGlu
# ZnJhZGVhZC5vcmcACgkQY3Ys2mfi81k+/xAAswivVR4+nwz3wTSN7EboGogS3hy+
# ZsTpvbJnfprGQJAK8vv8OP4eunaCJkO/dy3M/33Dh270msmV6I/1ki0E1RIPG45D
# n5wKM1Zxk0ABvjIgdp3xiLwITTdruJ+k9aqV8U9quhjgNFdOa7yjBOG8MD32GEPZ
# KHbavJ++huOu7+DZHJRNRq4gI/fREIULoPGHVg7WuEiRDYokOOmMROXqmTHTaUkV
# yFhkofzWxlpYhh7qRQx6/A80CSf7xwCof8krjdMCOYj3XGzYVZND0z5ZfHQYEwqt
# fowhargA8gH4V3d21S/MWCaZ+QrswFXZhcnl5wuGgWakV4ChvFETKs+fz2mODWUx
# 2T13trqeFJ5ElTrSpH1iWCoSEy6KCeLecvx7c/6HPSkDYQ3w5q8dXPpqgEtXY24S
# Wcmw4PkQ+HrLX7wbSU7QLyTZjvCQLFZ3Sb0uTf2zwsJZyeCCiT2lqAaogoMm6Kg0
# m/jG1JzE+9AC3j0Upp1lS3EK1qdxIuLdBuIcaEBEjy7Am+Y14PlZYoU2c751KbRF
# kqnIOYMoijX0PJDomPqCQtYNE0mrtogo0AbcFFIu+4k25vGbkl7xS5p2du9qw2Rd
# ++IdqQYzdzrUcIwmxocFQqFBJQ2dcbOGB1d7+VJ+A1Uj3yY2/DnFG5WqSaqS0KJi
# ZhBdFs3OTlPnRoM=
# =Dg79
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Nov 2023 17:13:21 HKT
# gpg: using RSA key BE07D9FD54809AB2C4B0FF5F63762CDA67E2F359
# gpg: issuer "dwmw2@infradead.org"
# gpg: Good signature from "David Woodhouse <dwmw2@infradead.org>" [unknown]
# gpg: aka "David Woodhouse <dwmw2@exim.org>" [unknown]
# gpg: aka "David Woodhouse <david@woodhou.se>" [unknown]
# gpg: aka "David Woodhouse <dwmw2@kernel.org>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: BE07 D9FD 5480 9AB2 C4B0 FF5F 6376 2CDA 67E2 F359
* tag 'pull-xenfv.for-upstream-20231107' of git://git.infradead.org/users/dwmw2/qemu:
docs: update Xen-on-KVM documentation
xen-platform: unplug AHCI disks
hw/i386/pc: support '-nic' for xen-net-device
hw/xen: update Xen PV NIC to XenDevice model
hw/xen: only remove peers of PCI NICs on unplug
hw/xen: add support for Xen primary console in emulated mode
hw/xen: update Xen console to XenDevice model
hw/xen: do not repeatedly try to create a failing backend device
hw/xen: add get_frontend_path() method to XenDeviceClass
hw/xen: automatically assign device index to block devices
hw/xen: populate store frontend nodes with XenStore PFN/port
i386/xen: advertise XEN_HVM_CPUID_UPCALL_VECTOR in CPUID
include: update Xen public headers to Xen 4.17.2 release
hw/xen: Clean up event channel 'type_val' handling to use union
i386/xen: Ignore VCPU_SSHOTTMR_future flag in set_singleshot_timer()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The default NIC creation seems a bit hackish to me. I don't understand
why each platform has to call pci_nic_init_nofail() from a point in the
code where it actually has a pointer to the PCI bus, and then we have
the special cases for things like ne2k_isa.
If qmp_device_add() can *find* the appropriate bus and instantiate
the device on it, why can't we just do that from generic code for
creating the default NICs too?
But that isn't a yak I want to shave today. Add a xenbus field to the
PCMachineState so that it can make its way from pc_basic_device_init()
to pc_nic_init() and be handled as a special case like ne2k_isa is.
Now we can launch emulated Xen guests with '-nic user'.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The primary console is special because the toolstack maps a page into
the guest for its ring, and also allocates the guest-side event channel.
The guest's grant table is even primed to export that page using a known
grant ref#. Add support for all that in emulated mode, so that we can
have a primary console.
For reasons unclear, the backends running under real Xen don't just use
a mapping of the well-known GNTTAB_RESERVED_CONSOLE grant ref (which
would also be in the ring-ref node in XenStore). Instead, the toolstack
sets the ring-ref node of the primary console to the GFN of the guest
page. The backend is expected to handle that special case and map it
with foreignmem operations instead.
We don't have an implementation of foreignmem ops for emulated Xen mode,
so just make it map GNTTAB_RESERVED_CONSOLE instead. This would probably
work for real Xen too, but we can't work out how to make real Xen create
a primary console of type "ioemu" to make QEMU drive it, so we can't
test that; might as well leave it as it is for now under Xen.
Now at last we can boot the Xen PV shim and run PV kernels in QEMU.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
If xen_backend_device_create() fails to instantiate a device, the XenBus
code will just keep trying over and over again each time the bus is
re-enumerated, as long as the backend appears online and in
XenbusStateInitialising.
The only thing which prevents the XenBus code from recreating duplicates
of devices which already exist, is the fact that xen_device_realize()
sets the backend state to XenbusStateInitWait. If the attempt to create
the device doesn't get *that* far, that's when it will keep getting
retried.
My first thought was to handle errors by setting the backend state to
XenbusStateClosed, but that doesn't work for XenConsole which wants to
*ignore* any device of type != "ioemu" completely.
So, make xen_backend_device_create() *keep* the XenBackendInstance for a
failed device, and provide a new xen_backend_exists() function to allow
xen_bus_type_enumerate() to check whether one already exists before
creating a new one.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The primary Xen console is special. The guest's side is set up for it by
the toolstack automatically and not by the standard PV init sequence.
Accordingly, its *frontend* doesn't appear in …/device/console/0 either;
instead it appears under …/console in the guest's XenStore node.
To allow the Xen console driver to override the frontend path for the
primary console, add a method to the XenDeviceClass which can be used
instead of the standard xen_device_get_frontend_path()
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
There's no need to force the user to assign a vdev. We can automatically
assign one, starting at xvda and searching until we find the first disk
name that's unused.
This means we can now allow '-drive if=xen,file=xxx' to work without an
explicit separate -driver argument, just like if=virtio.
Rip out the legacy handling from the xenpv machine, which was scribbling
over any disks configured by the toolstack, and didn't work with anything
but raw images.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
... in order to advertise the XEN_HVM_CPUID_UPCALL_VECTOR feature,
which will come in a subsequent commit.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Paul Durrant <paul@xen.org>
This implementation of tunneling makes the choice that our Type 3 device is
a Logical Device (LD) of a Multi-Logical Device (MLD) that just happens to
only have one LD for now.
Tunneling is supported from a Switch Mailbox CCI (and shortly via MCTP over
I2C connected to the switch MCTP CCI) via an outer level to the FM owned LD
in the MLD Type 3 device. From there an inner tunnel may be used to access
particular LDs.
Protocol wise, the following is what happens in a real system but we
don't emulate the transports - just the destinations and the payloads.
( Host -> Switch Mailbox CCI - in band FM-API mailbox command
or
Host -> Switch MCTP CCI - MCTP over I2C using the CXL FM-API
MCTP Binding.
)
then (if a tunnel command)
Switch -> Type 3 FM Owned LD - MCTP over PCI VDM using the
CXL FM-API binding (addressed by switch port)
then (if unwrapped command also a tunnel command)
Type 3 FM Owned LD to LD0 via internal transport
(addressed by LD number)
or (added shortly)
Host to Type 3 FM Owned MCTP CCI - MCTP over I2C using the
CXL FM-API MCTP Binding.
then (if unwrapped comand is a tunnel comamnd)
Type 3 FM Owned LD to LD0 via internal transport.
(addressed by LD number)
It is worth noting that the tunneling commands over PCI VDM
presumably use the appropriate MCTP binding depending on opcode.
This may be the CXL FMAPI binding or the CXL Memory Device Binding.
Additional commands will need to be added to make this
useful beyond testing the tunneling works.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20231023160806.13206-18-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make use of the background operations through the sanitize command, per CXL
3.0 specs. Traditionally run times can be rather long, depending on the
size of the media.
Estimate times based on:
https://pmem.io/documents/NVDIMM_DSM_Interface-V1.8.pdf
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20231023160806.13206-14-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Notify when the background operation is done. Note that for now background
commands are only supported on the main Type 3 mailbox.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20231023160806.13206-13-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Support background commands in the mailbox, and update
cmd_infostat_bg_op_sts() accordingly. This patch does not implement mbox
interrupts upon completion, so the kernel driver must rely on polling to
know when the operation is done.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20231023160806.13206-12-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable it for the switch CCI.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20231023160806.13206-9-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL switch CCIs were added in CXL r3.0. They are a PCI function,
identified by class code that provides a CXL mailbox (identical
to that previously defined for CXL type 3 memory devices) over which
various FM-API commands may be used. Whilst the intent of this
feature is enable switch control from a BMC attached to a switch
upstream port, it is also useful to allow emulation of this feature
on the upstream port connected to a host using the CXL devices as
this greatly simplifies testing.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20231023160806.13206-7-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To avoid repetition of switch upstream port specific data in the
CXLDeviceState structure it will be necessary to access the switch USP
specific data from mailbox callbacks. Hence move it to cxl_device.h so it
is no longer an opaque structure.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20231023160806.13206-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
By moving the parts of the mailbox command handling that are CCI type
specific out to the caller, make the main handling code generic. Rename it
to cxl_process_cci_message() to reflect this new generality.
Change the type3 mailbox handling (reused shortly for the switch
mailbox CCI) to take a snapshot of the mailbox input data rather
than operating on it in place. This reduces the chance of bugs
due to aliasing going forwars.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20231023160806.13206-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enables having multiple CCIs per devices. Each CCI (mailbox) has it's own
state and command list, so they can't share a single structure.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20231023160806.13206-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
New CCI types that will be supported shortly do not have a single buffer
used in both directions. As such, split it up. To avoid the complexities
of implementing all commands to handle potential aliasing, take a copy of
the input before use.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20231023160806.13206-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Putting the pointer in the structure for command handling puts a single
variable element inside an otherwise constant structure. Move it out as
a directly passed variable and take the cxl_cmd structures constant.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20231023160806.13206-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael Tsirkin observed that there were some unnecessarily
long lines in the CXL code in a recent review.
This patch is intended to rectify that where it does not
hurt readability.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20231023140210.3089-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Done to reduce line lengths where this is used.
Ext seems sufficiently obvious that it need not be spelt out
fully.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20231023140210.3089-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Handle output IO messages in the transmit (TX) virtqueue.
It allocates a VirtIOSoundPCMBuffer for each IO message and copies the
data buffer to it. When the IO buffer is written to the host's sound
card, the guest will be notified that it has been consumed.
The lifetime of an IO message is:
1. Guest sends IO message to TX virtqueue.
2. QEMU adds it to the appropriate stream's IO buffer queue.
3. Sometime later, the host audio backend calls the output callback,
virtio_snd_pcm_out_cb(), which is defined with an AUD_open_out()
call. The callback gets an available number of bytes the backend can
receive. Then it writes data from the IO buffer queue to the backend.
If at any time a buffer is exhausted, it is returned to the guest as
completed.
4. If the guest releases the stream, its buffer queue is flushed by
attempting to write any leftover data to the audio backend and
releasing all IO messages back to the guest. This is how according to
the spec the guest knows the release was successful.
Based-on: 5a2f350eec
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <b7c6fc458c763d09a4abbcb620ae9b220afa5b8f.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Receive guest requests in the control (CTRL) queue of the virtio sound
device and reply with a NOT SUPPORTED error to all control commands.
The receiving handler is virtio_snd_handle_ctrl(). It stores all control
messages in the queue in the device's command queue. Then it calls
virtio_snd_process_cmdq() to handle each message.
The handler is process_cmd() which replies with VIRTIO_SND_S_NOT_SUPP.
Based-on: 5a2f350eec
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <3224aff87e7c4f2777bfe1bbbbca93b72525992c.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a new VIRTIO device for the virtio sound device id. Functionality
will be added in the following commits.
Based-on: 5a2f350eec
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <f9678a41fe97b5886c1b04795f1be046509de866.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_save_backend_state() and vhost_load_backend_state() can be used by
vhost front-ends to easily save and load the back-end's state to/from
the migration stream.
Because we do not know the full state size ahead of time,
vhost_save_backend_state() simply reads the data in 1 MB chunks, and
writes each chunk consecutively into the migration stream, prefixed by
its length. EOF is indicated by a 0-length chunk.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20231016134243.68248-7-hreitz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the interface for transferring the back-end's state during migration
as defined previously in vhost-user.rst.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20231016134243.68248-6-hreitz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
hw/hppa: Map astro chip 64-bit I/O mem
hw/hppa: Turn on 64-bit cpu for C3700
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmVJqDEdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8n5Qf/R15CvXGMgjDJjoV2
ILMFM+Rpg17SR2yu060sEZ01R3iHdobeCcDB184K0RI9JLrpcBFar+PeF023o9fn
O9MnfIyL6/ggzaeIpQ9AD2uT0HJMU9hLFoyQqQvnhDHHcT34raL2+Zkrkb2vvauH
XET7awXN9xYCnY4ALrfcapzlrHqI77ahz0vReUWPxk7eGY2ez8dEOiFW2WLBmuMx
mAFAMrFQhq66GjoMDl8JiGHD/KBJQ9X4eUAEotS27lTCOYU0ryA6dWBGqBSTWCUa
smpxkeGQKOew+717HV1H4FdCRYG1Rgm7yFN423JULeew+T7DHvfe0K55vMIulx5I
g3oVZA==
=dxC7
-----END PGP SIGNATURE-----
Merge tag 'pull-pa-20231106' of https://gitlab.com/rth7680/qemu into staging
target/hppa: Implement PA2.0 instructions
hw/hppa: Map astro chip 64-bit I/O mem
hw/hppa: Turn on 64-bit cpu for C3700
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmVJqDEdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8n5Qf/R15CvXGMgjDJjoV2
# ILMFM+Rpg17SR2yu060sEZ01R3iHdobeCcDB184K0RI9JLrpcBFar+PeF023o9fn
# O9MnfIyL6/ggzaeIpQ9AD2uT0HJMU9hLFoyQqQvnhDHHcT34raL2+Zkrkb2vvauH
# XET7awXN9xYCnY4ALrfcapzlrHqI77ahz0vReUWPxk7eGY2ez8dEOiFW2WLBmuMx
# mAFAMrFQhq66GjoMDl8JiGHD/KBJQ9X4eUAEotS27lTCOYU0ryA6dWBGqBSTWCUa
# smpxkeGQKOew+717HV1H4FdCRYG1Rgm7yFN423JULeew+T7DHvfe0K55vMIulx5I
# g3oVZA==
# =dxC7
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Nov 2023 11:00:01 HKT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-pa-20231106' of https://gitlab.com/rth7680/qemu: (85 commits)
hw/hppa: Allow C3700 with 64-bit and B160L with 32-bit CPU only
hw/hppa: Turn on 64-bit CPU for C3700 machine
hw/pci-host/astro: Trigger CPU irq on CPU HPA in high memory
hw/pci-host/astro: Map Astro chip into 64-bit I/O memory region
target/hppa: Improve interrupt logging
target/hppa: Update IIAOQ, IIASQ for pa2.0
target/hppa: Create raise_exception_with_ior
target/hppa: Add unwind_breg to CPUHPPAState
target/hppa: Clear upper bits in mtctl for pa1.x
target/hppa: Avoid async_safe_run_on_cpu on uniprocessor system
target/hppa: Add pa2.0 cpu local tlb flushes
target/hppa: Implement pa2.0 data prefetch instructions
linux-user/hppa: Drop EXCP_DUMP from handled exceptions
hw/hppa: Translate phys addresses for the cpu
include/hw/elf: Remove truncating signed casts
target/hppa: Return zero for r0 from load_gpr
target/hppa: Precompute zero into DisasContext
target/hppa: Fix interruption based on default PSW
target/hppa: Implement PERMH
target/hppa: Implement MIXH, MIXW
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There's nothing about elf that specifically requires signed vs unsigned.
This is very much a target-specific preference.
In the meantime, casting low and high from uint64_t back to Elf_SWord
to uint64_t discards high bits that might have been set by translate_fn.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Support for non 64b IOVA space
* Introduction of a PCIIOMMUOps callback structure to ease future
extensions
* Fix for a buffer overrun when writing the VF token
* PPC cleanups preparing ground for IOMMUFD support
-----BEGIN PGP SIGNATURE-----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=/Du0
-----END PGP SIGNATURE-----
Merge tag 'pull-vfio-20231106' of https://github.com/legoater/qemu into staging
vfio queue:
* Support for non 64b IOVA space
* Introduction of a PCIIOMMUOps callback structure to ease future
extensions
* Fix for a buffer overrun when writing the VF token
* PPC cleanups preparing ground for IOMMUFD support
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmVI+bIACgkQUaNDx8/7
# 7KHW4g/9FmgX0k2Elm1BAul3slJtuBT8/iHKfK19rhXICxhxS5xBWJA8FmosTWAT
# 91YqQJhOHARxLd9VROfv8Fq8sAo+Ys8bP3PTXh5satjY5gR9YtmMSVqvsAVLn7lv
# a/0xp7wPJt2UeKzvRNUqFXNr7yHPwxFxbJbmmAJbNte8p+TfE2qvojbJnu7BjJbg
# sTtS/vFWNJwtuNYTkMRoiZaUKEoEZ8LnslOqKUjgeO59g4i3Dq8e2JCmHANPFWUK
# cWmr7AqcXgXEnLSDWTtfN53bjcSCYkFVb4WV4Wv1/7hUF5jQ4UR0l3B64xWe0M3/
# Prak3bWOM/o7JwLBsgaWPngXA9V0WFBTXVF4x5qTwhuR1sSV8MxUvTKxI+qqiEzA
# FjU89oSZ+zXId/hEUuTL6vn1Th8/6mwD0L9ORchNOQUKzCjBzI4MVPB09nM3AdPC
# LGThlufsZktdoU2KjMHpc+gMIXQYsxkgvm07K5iZTZ5eJ4tV5KB0aPvTZppGUxe1
# YY9og9F3hxjDHQtEuSY2rzBQI7nrUpd1ZI5ut/3ZgDWkqD6aGRtMme4n4GsGsYb2
# Ht9+d2RL9S8uPUh+7rV8K/N3+vXgXRaEYTuAScKtflEbA7YnZA5nUdMng8x0kMTQ
# Y73XCd4UGWDfSSZsgaIHGkM/MRIHgmlrfcwPkWqWW9vF+92O6Hw=
# =/Du0
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Nov 2023 22:35:30 HKT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [unknown]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20231106' of https://github.com/legoater/qemu: (22 commits)
vfio/common: Move vfio_host_win_add/del into spapr.c
vfio/spapr: Make vfio_spapr_create/remove_window static
vfio/container: Move spapr specific init/deinit into spapr.c
vfio/container: Move vfio_container_add/del_section_window into spapr.c
vfio/container: Move IBM EEH related functions into spapr_pci_vfio.c
util/uuid: Define UUID_STR_LEN from UUID_NONE string
util/uuid: Remove UUID_FMT_LEN
vfio/pci: Fix buffer overrun when writing the VF token
util/uuid: Add UUID_STR_LEN definition
hw/pci: modify pci_setup_iommu() to set PCIIOMMUOps
test: Add some tests for range and resv-mem helpers
virtio-iommu: Consolidate host reserved regions and property set ones
virtio-iommu: Implement set_iova_ranges() callback
virtio-iommu: Record whether a probe request has been issued
range: Introduce range_inverse_array()
virtio-iommu: Introduce per IOMMUDevice reserved regions
util/reserved-region: Add new ReservedRegion helpers
range: Make range_compare() public
virtio-iommu: Rename reserved_regions into prop_resv_regions
vfio: Collect container iova range info
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This driver is like virtio-balloon on steroids: it allows both changing the
guest memory allocation via ballooning and (in the next patch) inserting
pieces of extra RAM into it on demand from a provided memory backend.
The actual resizing is done via ballooning interface (for example, via
the "balloon" HMP command).
This includes resizing the guest past its boot size - that is, hot-adding
additional memory in granularity limited only by the guest alignment
requirements, as provided by the next patch.
In contrast with ACPI DIMM hotplug where one can only request to unplug a
whole DIMM stick this driver allows removing memory from guest in single
page (4k) units via ballooning.
After a VM reboot the guest is back to its original (boot) size.
In the future, the guest boot memory size might be changed on reboot
instead, taking into account the effective size that VM had before that
reboot (much like Hyper-V does).
For performance reasons, the guest-released memory is tracked in a few
range trees, as a series of (start, count) ranges.
Each time a new page range is inserted into such tree its neighbors are
checked as candidates for possible merging with it.
Besides performance reasons, the Dynamic Memory protocol itself uses page
ranges as the data structure in its messages, so relevant pages need to be
merged into such ranges anyway.
One has to be careful when tracking the guest-released pages, since the
guest can maliciously report returning pages outside its current address
space, which later clash with the address range of newly added memory.
Similarly, the guest can report freeing the same page twice.
The above design results in much better ballooning performance than when
using virtio-balloon with the same guest: 230 GB / minute with this driver
versus 70 GB / minute with virtio-balloon.
During a ballooning operation most of time is spent waiting for the guest
to come up with newly freed page ranges, processing the received ranges on
the host side (in QEMU and KVM) is nearly instantaneous.
The unballoon operation is also pretty much instantaneous:
thanks to the merging of the ballooned out page ranges 200 GB of memory can
be returned to the guest in about 1 second.
With virtio-balloon this operation takes about 2.5 minutes.
These tests were done against a Windows Server 2019 guest running on a
Xeon E5-2699, after dirtying the whole memory inside guest before each
balloon operation.
Using a range tree instead of a bitmap to track the removed memory also
means that the solution scales well with the guest size: even a 1 TB range
takes just a few bytes of such metadata.
Since the required GTree operations aren't present in every Glib version
a check for them was added to the meson build script, together with new
"--enable-hv-balloon" and "--disable-hv-balloon" configure arguments.
If these GTree operations are missing in the system's Glib version this
driver will be skipped during QEMU build.
An optional "status-report=on" device parameter requests memory status
events from the guest (typically sent every second), which allow the host
to learn both the guest memory available and the guest memory in use
counts.
Following commits will add support for their external emission as
"HV_BALLOON_STATUS_REPORT" QMP events.
The driver is named hv-balloon since the Linux kernel client driver for
the Dynamic Memory Protocol is named as such and to follow the naming
pattern established by the virtio-balloon driver.
The whole protocol runs over Hyper-V VMBus.
The driver was tested against Windows Server 2012 R2, Windows Server 2016
and Windows Server 2019 guests and obeys the guest alignment requirements
reported to the host via DM_CAPABILITIES_REPORT message.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
This commit adds Hyper-V Dynamic Memory Protocol definitions, taken
from hv_balloon Linux kernel driver, adapted to the QEMU coding style and
definitions.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Only spapr supports a customed host window list, other vfio driver
assume 64bit host window. So remove the check in listener callback
and move vfio_host_win_add/del into spapr.c and make it static.
With the check removed, we still need to do the same check for
VFIO_SPAPR_TCE_IOMMU which allows a single host window range
[dma32_window_start, dma32_window_size). Move vfio_find_hostwin
into spapr.c and do same check in vfio_container_add_section_window
instead.
When mapping a ram device section, if it's unaligned with
hostwin->iova_pgsizes, this mapping is bypassed. With hostwin
moved into spapr, we changed to check container->pgsizes.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
vfio_spapr_create_window calls vfio_spapr_remove_window,
With reoder of definition of the two, we can make
vfio_spapr_create/remove_window static.
No functional changes intended.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Move spapr specific init/deinit code into spapr.c and wrap
them with vfio_spapr_container_init/deinit, this way footprint
of spapr is further reduced, vfio_prereg_listener could also
be made static.
vfio_listener_release is unnecessary when prereg_listener is
moved out, so have it removed.
No functional changes intended.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
With vfio_eeh_as_ok/vfio_eeh_as_op moved and made static,
vfio.h becomes empty and is deleted.
No functional changes intended.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Let's support empty memory devices -- memory devices that don't have a
memory device region in the current configuration. hv-balloon with an
optional memdev is the primary use case.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
This patch modifies pci_setup_iommu() to set PCIIOMMUOps
instead of setting PCIIOMMUFunc. PCIIOMMUFunc is used to
get an address space for a PCI device in vendor specific
way. The PCIIOMMUOps still offers this functionality. But
using PCIIOMMUOps leaves space to add more iommu related
vendor specific operations.
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Yi Sun <yi.y.sun@linux.intel.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hervé Poussineau <hpoussin@reactos.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Cc: Jagannathan Raman <jag.raman@oracle.com>
Cc: Matthew Rosato <mjrosato@linux.ibm.com>
Cc: Eric Farman <farman@linux.ibm.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[ clg: - refreshed on latest QEMU
- included hw/remote/iommu.c
- documentation update
- asserts in pci_setup_iommu()
- removed checks on iommu_bus->iommu_ops->get_address_space
- included Elroy PCI host (PA-RISC) ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The implementation populates the array of per IOMMUDevice
host reserved ranges.
It is forbidden to have conflicting sets of host IOVA ranges
to be applied onto the same IOMMU MR (implied by different
host devices).
In case the callback is called after the probe request has
been issues by the driver, a warning is issued.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: "Michael S. Tsirkin" <mst@redhat.com>
Tested-by: Yanghang Liu <yanghliu@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add an IOMMUDevice 'probe_done' flag to record that the driver
already issued a probe request on that device.
This will be useful to double check host reserved regions aren't
notified after the probe and hence are not taken into account
by the driver.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: "Michael S. Tsirkin" <mst@redhat.com>
Tested-by: Yanghang Liu <yanghliu@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
For the time being the per device reserved regions are
just a duplicate of IOMMU wide reserved regions. Subsequent
patches will combine those with host reserved regions, if any.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Yanghang Liu <yanghliu@redhat.com>
Reviewed-by: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Rename VirtIOIOMMU (nb_)reserved_regions fields with the "prop_" prefix
to highlight those fields are set through a property, at machine level.
They are IOMMU wide.
A subsequent patch will introduce per IOMMUDevice reserved regions
that will include both those IOMMU wide property reserved
regions plus, sometimes, host reserved regions, if the device is
backed by a host device protected by a physical IOMMU. Also change
nb_ prefix by nr_.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Collect iova range information if VFIO_IOMMU_TYPE1_INFO_CAP_IOVA_RANGE
capability is supported.
This allows to propagate the information though the IOMMU MR
set_iova_ranges() callback so that virtual IOMMUs
get aware of those aperture constraints. This is only done if
the info is available and the number of iova ranges is greater than
0.
A new vfio_get_info_iova_range helper is introduced matching
the coding style of existing vfio_get_info_dma_avail. The
boolean returned value isn't used though. Code is aligned
between both.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Yanghang Liu <yanghliu@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
* linux-user/elfload: Add missing arm64 hwcap values
* stellaris-gamepad: Convert to qdev
* docs/specs: Convert various txt docs to rST
* MAINTAINERS: Make sure that gicv3_internal.h is covered, too
* hw/arm/pxa2xx_gpio: Pass CPU using QOM link property
* hw/watchdog/wdt_imx2: Trace MMIO access and timer activity
* hw/misc/imx7_snvs: Trace MMIO access
* hw/misc/imx6_ccm: Convert DPRINTF to trace events
* hw/i2c/pm_smbus: Convert DPRINTF to trace events
* target/arm: Enable FEAT_MOPS insns in user-mode emulation
* linux-user: Report AArch64 hwcap2 fields above bit 31
* target/arm: Make FEAT_MOPS SET* insns handle Xs == XZR correctly
* target/arm: Fix SVE STR increment
* hw/char/stm32f2xx_usart: implement TX interrupts
* target/arm: Correctly propagate stage 1 BTI guarded bit in a two-stage walk
* xlnx-versal-virt: Add AMD/Xilinx TRNG device
-----BEGIN PGP SIGNATURE-----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=OgfH
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20231102' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* linux-user/elfload: Add missing arm64 hwcap values
* stellaris-gamepad: Convert to qdev
* docs/specs: Convert various txt docs to rST
* MAINTAINERS: Make sure that gicv3_internal.h is covered, too
* hw/arm/pxa2xx_gpio: Pass CPU using QOM link property
* hw/watchdog/wdt_imx2: Trace MMIO access and timer activity
* hw/misc/imx7_snvs: Trace MMIO access
* hw/misc/imx6_ccm: Convert DPRINTF to trace events
* hw/i2c/pm_smbus: Convert DPRINTF to trace events
* target/arm: Enable FEAT_MOPS insns in user-mode emulation
* linux-user: Report AArch64 hwcap2 fields above bit 31
* target/arm: Make FEAT_MOPS SET* insns handle Xs == XZR correctly
* target/arm: Fix SVE STR increment
* hw/char/stm32f2xx_usart: implement TX interrupts
* target/arm: Correctly propagate stage 1 BTI guarded bit in a two-stage walk
* xlnx-versal-virt: Add AMD/Xilinx TRNG device
* tag 'pull-target-arm-20231102' of https://git.linaro.org/people/pmaydell/qemu-arm: (33 commits)
tests/qtest: Introduce tests for AMD/Xilinx Versal TRNG device
hw/arm: xlnx-versal-virt: Add AMD/Xilinx TRNG device
hw/misc: Introduce AMD/Xilix Versal TRNG device
target/arm: Correctly propagate stage 1 BTI guarded bit in a two-stage walk
hw/char/stm32f2xx_usart: Add more definitions for CR1 register
hw/char/stm32f2xx_usart: Update IRQ when DR is written
hw/char/stm32f2xx_usart: Extract common IRQ update code to update_irq()
target/arm: Fix SVE STR increment
target/arm: Make FEAT_MOPS SET* insns handle Xs == XZR correctly
linux-user: Report AArch64 hwcap2 fields above bit 31
target/arm: Enable FEAT_MOPS insns in user-mode emulation
hw/i2c/pm_smbus: Convert DPRINTF to trace events
hw/misc/imx6_ccm: Convert DPRINTF to trace events
hw/misc/imx7_snvs: Trace MMIO access
hw/watchdog/wdt_imx2: Trace timer activity
hw/watchdog/wdt_imx2: Trace MMIO access
hw/arm/pxa2xx_gpio: Pass CPU using QOM link property
MAINTAINERS: Make sure that gicv3_internal.h is covered, too
docs/specs/vmgenid: Convert to rST
docs/specs/vmcoreinfo: Convert to rST
...
Conflicts:
hw/input/stellaris_input.c
The qdev conversion in this pull request ("stellaris-gamepad: Convert
to qdev") eliminates the vmstate_register() call that was converted to
vmstate_register_any() in the conflicting migration pull request.
vmstate_register_any() is no longer necessary now that this device has
been converted to qdev, so take this pull request's version of
stellaris_gamepad.c over the previous pull request's
stellaris_input.c (the file was renamed).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Hi
In this pull request:
- migration reboot mode (steve)
* I disabled the test because our CI don't like programs using so
much shared memory. Searching for a fix.
- test for postcopy recover (fabiano)
- MigrateAddress QAPI (het)
- better return path error handling (peter)
- traces for downtime (peter)
- vmstate_register() check for duplicates (juan)
thomas find better solutions for s390x and ipmi.
now also works on s390x
Please, apply.
-----BEGIN PGP SIGNATURE-----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=uaqL
-----END PGP SIGNATURE-----
Merge tag 'migration-20231102-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request (20231102)
Hi
In this pull request:
- migration reboot mode (steve)
* I disabled the test because our CI don't like programs using so
much shared memory. Searching for a fix.
- test for postcopy recover (fabiano)
- MigrateAddress QAPI (het)
- better return path error handling (peter)
- traces for downtime (peter)
- vmstate_register() check for duplicates (juan)
thomas find better solutions for s390x and ipmi.
now also works on s390x
Please, apply.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmVDipMACgkQ9IfvGFhy
# 1yNYnQ/9E5Cywsoqljqa/9FiKBSII2qMrmkfu6JLKqePnsh5pFZiukbudYRuJCCe
# ZTDEmD0NmKRJbDx2xRU1qx/e6gKJy+gz37KP89Buuh/WwZHPboPYtxQpGvCSiH26
# J3i+1+TgaqmkLzcO35wa8tp6gneQclWeAwKgMvdb4cm2pJEhgWRKI62ccyLzxeve
# UCzFQn60t55ETyVZGnRD4YwdTQvGKH+DPlyTuJOLR3DePuvZd8EdH+ypvB4RLAy7
# 3+CuQOxmF5LRXPbpJuAeOsudbmhhHzrO/yL7ZmsiKQTthsJv+SzC1bO94jhQrawZ
# Q7GCii5KpGq0KnRTRKZRGk6XKwxcYRduXMX3R5tXuVmDmCZsjhXzziU8yEdftph8
# 5TJdk1o0Gb043EFu81mrsQYS+9yJqe6sy6m3PTJaec54cAty5ln+c17WOvpAOaSV
# +1phe05ftuVPmQ3KWhbIR/tCmavNLwEZxpVIfyaKJx04bFbtQ9gRpRyURORX4KXc
# s4WXvNirQEohxYBnP4TPvA09xBTW3V08pk/wRDwt0YDXnLiqCltOuxD8r05K8K4B
# MkCLcWj0g7he2tBkF60oz1KSIE0oTB81um9AzLIv5F2YSYLaJM5BIcoC437MR2f4
# MOR7drR1fP5GsRu/SeU5BWvhVq3IvdOxR7G2MLNRJJvl7ZtGXDc=
# =uaqL
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 02 Nov 2023 19:40:03 HKT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-20231102-pull-request' of https://gitlab.com/juan.quintela/qemu: (40 commits)
migration: modify test_multifd_tcp_none() to use new QAPI syntax.
migration: Implement MigrateChannelList to hmp migration flow.
migration: Implement MigrateChannelList to qmp migration flow.
migration: modify migration_channels_and_uri_compatible() for new QAPI syntax
migration: New migrate and migrate-incoming argument 'channels'
migration: Convert the file backend to the new QAPI syntax
migration: convert exec backend to accept MigrateAddress.
migration: convert rdma backend to accept MigrateAddress
migration: convert socket backend to accept MigrateAddress
migration: convert migration 'uri' into 'MigrateAddress'
migration: New QAPI type 'MigrateAddress'
migration: Change ram_dirty_bitmap_reload() retval to bool
tests/migration-test: Add a test for postcopy hangs during RECOVER
migration: Allow network to fail even during recovery
migration: Refactor error handling in source return path
tests/qtest: migration: add reboot mode test
cpr: reboot mode
cpr: relax vhost migration blockers
cpr: relax blockdev migration blockers
migration: per-mode blockers
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Connect the support for Versal True Random Number Generator
(TRNG) device.
Warning: unlike the TRNG component in a real device from the
Versal device familiy, the connected TRNG model is not of
cryptographic grade and is not intended for use cases when
cryptograpically strong TRNG is needed.
Signed-off-by: Tong Ho <tong.ho@amd.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20231031184611.3029156-3-tong.ho@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds a non-cryptographic grade implementation of the
model for the True Random Number Generator (TRNG) component
in AMD/Xilinx Versal device family.
This implements all 3 modes defined by the actual hardware
specs, all of which selectable by guest software at will
at anytime:
1) PRNG mode, in which the generated sequence is required to
be reproducible after reseeded by the same 384-bit value
as supplied by guest software.
2) Test mode, in which the generated sequence is required to
be reproducible ater reseeded by the same 128-bit test
seed supplied by guest software.
3) TRNG mode, in which non-reproducible sequence is generated
based on periodic reseed by a suitable entropy source.
This model is only intended for non-real world testing of
guest software, where cryptographically strong PRNG or TRNG
is not needed.
This model supports versions 1 & 2 of the device, with
default to be version 2; the 'hw-version' uint32 property
can be set to 0x0100 to override the default.
Other implemented properties:
- 'forced-prng', uint64
When set to non-zero, mode 3's entropy source is implemented
as a deterministic sequence based on the given value and other
deterministic parameters.
This option allows the emulation to test guest software using
mode 3 and to reproduce data-dependent defects.
- 'fips-fault-events', uint32, bit-mask
bit 3: Triggers the SP800-90B entropy health test fault irq
bit 1: Triggers the FIPS 140-2 continuous test fault irq
Signed-off-by: Tong Ho <tong.ho@amd.com>
Message-id: 20231031184611.3029156-2-tong.ho@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
