Commit Graph

32280 Commits

Author SHA1 Message Date
Markus Armbruster
5ef4a0cb63 pci: Move HMP commands from monitor/ to new hw/pci/pci-hmp-cmds.c
This moves these commands from MAINTAINERS section "Human
Monitor (HMP)" to "PCI".

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20221201121133.3813857-4-armbru@redhat.com>
2022-12-19 16:21:51 +01:00
Markus Armbruster
987b73b389 pci: Move QMP commands to new hw/pci/pci-qmp-cmds.c
This moves these commands from MAINTAINERS section "QMP" to "PCI".

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221201121133.3813857-3-armbru@redhat.com>
[Commit message improved]
2022-12-19 16:15:17 +01:00
Markus Armbruster
5da4ccd9d4 pci: Clean up a few things checkpatch.pl would flag later on
Fix a few style violations so that checkpatch.pl won't complain when I
move this code.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221201121133.3813857-2-armbru@redhat.com>
2022-12-19 16:00:03 +01:00
Peter Maydell
562d4af32e Add cfi01 pflash device
-----BEGIN PGP SIGNATURE-----
 
 iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCY5rRbwAKCRBAov/yOSY+
 3z9gA/4kVknTVNswOlcESvnjuTg0Qli6rWZy+Zjn6ZaqMFaHS3sWMEolOT1Dvtus
 8iCKFS64224D0Lacf3aFeNlY2hmO65mcprgn04NxUWIxbgXQJg+fPmDfbQUNGJ1u
 W+ylq855Ups7/gWXRsMNb1ZFllEyUu9KZxbEQS98FPc+2shU8w==
 =+kWk
 -----END PGP SIGNATURE-----

Merge tag 'pull-loongarch-20221215' of https://gitlab.com/gaosong/qemu into staging

Add cfi01 pflash device

# gpg: Signature made Thu 15 Dec 2022 07:49:03 GMT
# gpg:                using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C  6C2C 40A2 FFF2 3926 3EDF

* tag 'pull-loongarch-20221215' of https://gitlab.com/gaosong/qemu:
  hw/loongarch/virt: Add cfi01 pflash device

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-18 13:53:29 +00:00
Peter Maydell
a0c2e80afc hw/pci-host/pnv_phb3_msi: Convert TYPE_PHB3_MSI to 3-phase reset
Convert the TYPE_PHB3_MSI class to 3-phase reset, so we can
avoid using the device_class_set_parent_reset() function.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221125115240.3005559-8-peter.maydell@linaro.org
2022-12-16 15:59:07 +00:00
Peter Maydell
a359da4c62 hw/intc/xics: Convert TYPE_ICS to 3-phase reset
Convert the TYPE_ICS class to 3-phase reset; this will allow us
to convert the TYPE_PHB3_MSI class which inherits from it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221125115240.3005559-7-peter.maydell@linaro.org
2022-12-16 15:59:07 +00:00
Peter Maydell
36cdc8b3b8 hw/intc/xics: Reset TYPE_ICS objects with device_cold_reset()
The realize method for the TYPE_ICS class uses qemu_register_reset()
to register a reset handler, as a workaround for the fact that
currently objects which directly inherit from TYPE_DEVICE don't get
automatically reset.  However, the reset function directly calls
ics_reset(), which is the function that implements the legacy reset
method.  This means that only the parent class's data gets reset, and
a subclass which also needs to handle reset, like TYPE_PHB3_MSI, has
to register its own reset function.

Make the TYPE_ICS reset function call device_cold_reset() instead:
this will handle reset for both the parent class and the subclass,
and will work whether the classes are using legacy reset or 3-phase
reset. This allows us to remove the reset function that the subclass
currently has to set up.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221125115240.3005559-6-peter.maydell@linaro.org
2022-12-16 15:59:07 +00:00
Peter Maydell
f4c636b0c2 pci: Convert child classes of TYPE_PCIE_ROOT_PORT to 3-phase reset
Convert the TYPE_CXL_ROOT_PORT and TYPE_PNV_PHB_ROOT_PORT classes to
3-phase reset, so they don't need to use the deprecated
device_class_set_parent_reset() function any more.

We have to do both in the same commit, because they keep the
parent_reset field in their common parent class's class struct.

Note that pnv_phb_root_port_class_init() was pointlessly setting
dc->reset twice, once by calling device_class_set_parent_reset()
and once directly.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221125115240.3005559-5-peter.maydell@linaro.org
2022-12-16 15:59:07 +00:00
Peter Maydell
bb27210c8c pci: Convert TYPE_PCIE_ROOT_PORT to 3-phase reset
Convert the TYPE_PCIE_ROOT_PORT device to 3-phase reset; this is a
necessary precursor to converting any of its child classes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221125115240.3005559-4-peter.maydell@linaro.org
2022-12-16 15:59:07 +00:00
Peter Maydell
0d89890466 hw/display/virtio-vga: Convert TYPE_VIRTIO_VGA_BASE to 3-phase reset
Convert the TYPE_VIRTIO_VGA_BASE class to 3-phase reset, so we
don't need to use device_class_set_parent_reset() any more.

Note that this is an abstract class itself; none of the subclasses
override its reset method.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221125115240.3005559-3-peter.maydell@linaro.org
2022-12-16 15:59:07 +00:00
Peter Maydell
54da41834f hw/virtio: Convert TYPE_VIRTIO_PCI to 3-phase reset
Convert the TYPE_VIRTIO_PCI class to 3-phase reset.  This is
necessary so that we can convert the subclass TYPE_VIRTIO_VGA_BASE
also to 3-phase reset.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221125115240.3005559-2-peter.maydell@linaro.org
2022-12-16 15:59:07 +00:00
Peter Maydell
3b750f1b1a hw/core/cpu-common: Convert TYPE_CPU class to 3-phase reset
Convert the parent class TYPE_CPU to 3-phase reset. This
is a necessary prerequisite to converting the subclasses.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20221124115023.2437291-2-peter.maydell@linaro.org
2022-12-16 15:58:15 +00:00
Peter Maydell
ed053e8997 hw/misc: Convert TYPE_MOS6522 subclasses to 3-phase reset
Convert the various subclasses of TYPE_MOS6522 to 3-phase reset.
This removes some uses of device_class_set_parent_reset(), which we
would eventually like to be able to get rid of.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221110143459.3833425-3-peter.maydell@linaro.org
2022-12-16 15:56:55 +00:00
Peter Maydell
8bdaed0f30 hw/misc/mos6522: Convert TYPE_MOS6522 to 3-phase reset
Convert the TYPE_MOS6522 parent class to use 3-phase reset.  This is
a prerequisite for converting its subclasses.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221110143459.3833425-2-peter.maydell@linaro.org
2022-12-16 15:56:55 +00:00
Peter Maydell
fc2fc3c1ed hw/input/ps2.c: Convert TYPE_PS2_{KBD, MOUSE}_DEVICE to 3-phase reset
Convert the child classes TYPE_PS2_KBD_DEVICE and
TYPE_PS2_MOUSE_DEVICE to the 3-phase reset system.  This allows us to
stop using the old device_class_set_parent_reset() function.

We don't need to register an 'exit' phase function for the
subclasses, because they have no work to do in that phase.  Passing
NULL to resettable_class_set_parent_phases() will result in the
parent class method being called for that phase, so we don't need to
register a function purely to chain to the parent 'exit' phase
function.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221109170009.3498451-3-peter.maydell@linaro.org
2022-12-16 15:56:24 +00:00
Peter Maydell
2bb3f93037 hw/input/ps2: Convert TYPE_PS2_DEVICE to 3-phase reset
Convert the parent class TYPE_PS2_DEVICE to 3-phase reset.  Note that
we need an 'exit' phase function as well as the usual 'hold' phase
function, because changing outbound IRQ line state is only permitted
in 'exit'.  (Strictly speaking it's not supposed to be done in a
legacy reset handler either, but you can often get away with it.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221109170009.3498451-2-peter.maydell@linaro.org
2022-12-16 15:56:24 +00:00
Peter Maydell
c3141e21e3 hw: Remove device_legacy_reset()
The device_legacy_reset() function is now not used anywhere, so we
can remove the implementation.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-16 15:55:32 +00:00
Peter Maydell
e5e887c73b qdev: Remove qdev_reset_all() and qbus_reset_all()
Remove the qdev_reset_all() and qbus_reset_all() functions, now we
have moved all the callers over to the new device_cold_reset() and
bus_cold_reset() functions.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-16 15:55:32 +00:00
Peter Maydell
dfa6ba6bae Replace use of qdev_reset_all() with device_cold_reset()
The legacy function qdev_reset_all() performs a recursive reset,
starting from a qdev.  However, it does not permit any of the devices
in the tree to use three-phase reset, because device reset goes
through the device_legacy_reset() function that only calls the single
DeviceClass::reset method.

Switch to using the device_cold_reset() function instead.  This also
performs a recursive reset, where first the children are reset and
then finally the parent, but it uses the new (...in 2020...)
Resettable mechanism, which supports both the old style single-reset
method and also the new 3-phase reset handling.

This commit changes the five remaining uses of this function.

Commit created with:
 sed -i -e 's/qdev_reset_all/device_cold_reset/g' hw/i386/xen/xen_platform.c hw/input/adb.c hw/remote/vfio-user-obj.c hw/s390x/s390-virtio-ccw.c hw/usb/dev-uas.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-16 15:55:32 +00:00
Peter Maydell
8cadd251b0 hw/hyperv/vmbus: Use device_cold_reset() and bus_cold_reset()
In the vmbus code we currently use the legacy functions
qdev_reset_all() and qbus_reset_all().  These perform a recursive
reset, starting from either a qbus or a qdev.  However they do not
permit any of the devices in the tree to use three-phase reset,
because device reset goes through the device_legacy_reset() function
that only calls the single DeviceClass::reset method.

Switch to using the device_cold_reset() and bus_cold_reset()
functions.  These also perform a recursive reset, where first the
children are reset and then finally the parent, but they use the new
(...in 2020...) Resettable mechanism, which supports both the old
style single-reset method and also the new 3-phase reset handling.

This should be a no-behaviour-change commit which just reduces the
use of a deprecated API.

Commit created with:
  sed -i -e 's/qdev_reset_all/device_cold_reset/g;s/qbus_reset_all/bus_cold_reset/g' hw/hyperv/*.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-16 15:55:32 +00:00
Peter Maydell
78e4d5cbaf pci: Use device_cold_reset() and bus_cold_reset()
In the PCI subsystem we currently use the legacy function
qdev_reset_all() and qbus_reset_all().  These perform a recursive
reset, starting from either a qbus or a qdev.  However they do not
permit any of the devices in the tree to use three-phase reset,
because device reset goes through the device_legacy_reset() function
that only calls the single DeviceClass::reset method.

Switch to using the device_cold_reset() and bus_cold_reset()
functions.  These also perform a recursive reset, where first the
children are reset and then finally the parent, but they use the new
(...in 2020...) Resettable mechanism, which supports both the old
style single-reset method and also the new 3-phase reset handling.

This should be a no-behaviour-change commit which just reduces the
use of a deprecated API.

Commit created with:
 sed -i -e 's/qdev_reset_all/device_cold_reset/g;s/qbus_reset_all/bus_cold_reset/g' hw/pci/*.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-16 15:55:32 +00:00
Peter Maydell
d170529d56 hw/s390x/s390-pci-inst.c: Use device_cold_reset() to reset PCI devices
The semantic difference between the deprecated device_legacy_reset()
function and the newer device_cold_reset() function is that the new
function resets both the device itself and any qbuses it owns,
whereas the legacy function resets just the device itself and nothing
else.

In s390-pci-inst.c we use device_legacy_reset() to reset an
S390PCIBusDevice.  This device doesn't have any child qbuses, so the
functions do the same thing and we can stop using the deprecated one.

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-16 15:55:24 +00:00
Peter Maydell
4208e6ae11 * s390x PCI fixes and improvements (for the ISM device)
* Fix emulated MVCP and MVCS s390x instructions
 * Clean-ups for the e1000e qtest
 * Enable qtests on Windows
 * Update FreeBSD CI to version 12.4
 * Check --disable-tcg for ppc64 in the CI
 * Improve scripts/make-releases a little bit
 * Many other misc small clean-ups and fixes here and there
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmObN8gRHHRodXRoQHJl
 ZGhhdC5jb20ACgkQLtnXdP5wLbVzWQ/+OzpXQODK/Xp0UUwre4kxm1Ju15tHdIPr
 lb5GqxcxZQay2hH1OIr5RjCEODDCzO+uPPq9VPh+a8qrx+nypcJDXlNDX4y9e7yK
 wz8pZ8G8E6OmflHjojbKESTUbdDkCY3c+Ge86Jdot0UMtvwSkmU8VZ9EiFRW+9MF
 i6NDgEhpHeiur8834+7BMyYc5YDE5TPaNsbzpSulKZQUsPJ6gntKwA15YPgZobXX
 s2CnCV6E48zUaxhtZs5plFQKIkUS2TAl15Zvr4OVKjAXpSk86ysBUWKZjZDQup/l
 G6dh8yF1Y724l4oq7rpVcEG02vXQSlsUIZlpUWWmGyNzt6npJ71aWQbPN2we9C1j
 pa3hZDak/g9B8wDlWJQMYNcKKHUtp6LW+qqJxxujKUjzGlsXWgflpBjeXBH8TE3z
 vAi+iTXsQJSEwvhMboHzogZjLpyG1PXcrlksRyRPvgKyW00CzVTjclz58Yd+m/cm
 Bfc2T/PWr+OsxYXRZBZPu0RebQW1s3XnG0bx8jctcEty3ZsPs0eyPNvYTkT+sEnl
 e1BkXN6C1ImB214psH4mDzgtQx0/zz4vVMH+4JeeX5Wrfmc+FTjr083oiWsFJRsn
 JE+CkRbK74iN3fY6HhH9XiD60OwVMOgNe/NMhjH9eIokez8D15lOeKFMuR1vPwqi
 Rcuip8uENZk=
 =u/jz
 -----END PGP SIGNATURE-----

Merge tag 'pull-request-2022-12-15' of https://gitlab.com/thuth/qemu into staging

* s390x PCI fixes and improvements (for the ISM device)
* Fix emulated MVCP and MVCS s390x instructions
* Clean-ups for the e1000e qtest
* Enable qtests on Windows
* Update FreeBSD CI to version 12.4
* Check --disable-tcg for ppc64 in the CI
* Improve scripts/make-releases a little bit
* Many other misc small clean-ups and fixes here and there

# gpg: Signature made Thu 15 Dec 2022 15:05:44 GMT
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* tag 'pull-request-2022-12-15' of https://gitlab.com/thuth/qemu: (23 commits)
  tests/qtest/vhost-user-blk-test: don't abort all qtests on missing envar
  .gitlab/issue_templates: Move suggestions into comments
  gitlab-ci: Check building ppc64 without TCG
  FreeBSD: Upgrade to 12.4 release
  tests/qtest: Enable qtest build on Windows
  .gitlab-ci.d/windows.yml: Exclude qTests from 64-bit CI job for now
  .gitlab-ci.d/windows.yml: Keep 64-bit and 32-bit build scripts consistent
  .gitlab-ci.d/windows.yml: Unify the prerequisite packages
  tests/qtest/libqos/e1000e: Correctly group register accesses
  tests/qtest/e1000e-test: De-duplicate constants
  tests/qtest/libqos/e1000e: Remove "other" interrupts
  hw: Include the VMWare devices only in the x86 targets
  MAINTAINERS: Add documentation files to the corresponding sections
  util/oslib-win32: Remove obsolete reference to g_poll code
  util/qemu-config: Fix "query-command-line-options" to provide the right values
  scripts/make-release: Only clone single branches to speed up the script
  scripts/make-release: Add a simple help text for the script
  monitor/misc: Remove superfluous include statements
  target/s390x: The MVCP and MVCS instructions are not privileged
  target/s390x/tcg/mem_helper: Test the right bits in psw_key_valid()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15 21:39:56 +00:00
Peter Maydell
29dc49f031 target-arm queue:
* hw/arm/virt: Add properties to allow more granular
    configuration of use of highmem space
  * target/arm: Add Cortex-A55 CPU
  * hw/intc/arm_gicv3: Fix GICD_TYPER ITLinesNumber advertisement
  * Implement FEAT_EVT
  * Some 3-phase-reset conversions for Arm GIC, SMMU
  * hw/arm/boot: set initrd with #address-cells type in fdt
  * hw/misc: Move some arm-related files from specific_ss into softmmu_ss
  * Restrict arm_cpu_exec_interrupt() to TCG accelerator
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmObW5wZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3nWUD/4xKR9eAX9NTgASnvW3MffZ
 GMkCW8TVFJdJy7rNq7TvPfdBEieVwrAGUmsTpkqN41/CHIIwIfssLzq6k1iliCOa
 /BrqA6p/vff+gRfV0rEgy7i/VsHmWzD5TU6qR/Jm899HA1ZsHGUFHzjs5p+V9Uzz
 r3awYTYsYbmuUgeoCaAQhbsyLCRmSi7gVbxeEc6UZst36xZEVwG8tPTwnhZUk55E
 KkZkSPvGiQ+1VKeGnL2yvjGS8blZnJL55oJ7wI7yAypCxy6gudB1HGegaNPnNcxf
 9lwph5sYaXbc0vyyAK3EJ+KUaJV9ZDU/ipjt3o88egYSYlB40IRVH1d+3ckZKSdG
 EBlD2vIx4vHjaIUXorB9U6BuktBsPtDmJ6jEsTT+cbb8roGDMB/opDZMNQB4WMIU
 kVEGZg7o3qkNDruAQOjakz8kOLq1J/ZKXBkLKWAsTTzdfMlnOMxAbFuFMxut7a+q
 JULMPjX9dBJDhsjE841QkAbYst1phDg8hCc00JB6Rbrl39jr4GZWfvaLKnci17ts
 nskPa/ElXvQj5WLhNZmn6vAco8mtGeDHzSNPnAoCCcDHd+hwfXkXKkweWZzzAr3f
 /PprDZy4hrksYqyYa9YMMQjHOlXQrJs5GntptnZwQQR2hhuQcCnBSNKxF+G6tk+K
 7Q1FjpE2d8NvL8Ar+WaX8w==
 =YAjF
 -----END PGP SIGNATURE-----

Merge tag 'pull-target-arm-20221215-1' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
 * hw/arm/virt: Add properties to allow more granular
   configuration of use of highmem space
 * target/arm: Add Cortex-A55 CPU
 * hw/intc/arm_gicv3: Fix GICD_TYPER ITLinesNumber advertisement
 * Implement FEAT_EVT
 * Some 3-phase-reset conversions for Arm GIC, SMMU
 * hw/arm/boot: set initrd with #address-cells type in fdt
 * hw/misc: Move some arm-related files from specific_ss into softmmu_ss
 * Restrict arm_cpu_exec_interrupt() to TCG accelerator

# gpg: Signature made Thu 15 Dec 2022 17:38:36 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg:                 aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20221215-1' of https://git.linaro.org/people/pmaydell/qemu-arm: (28 commits)
  target/arm: Restrict arm_cpu_exec_interrupt() to TCG accelerator
  hw/misc: Move some arm-related files from specific_ss into softmmu_ss
  hw/arm/boot: set initrd with #address-cells type in fdt
  hw/intc: Convert TYPE_KVM_ARM_ITS to 3-phase reset
  hw/intc: Convert TYPE_ARM_GICV3_ITS to 3-phase reset
  hw/intc: Convert TYPE_ARM_GICV3_ITS_COMMON to 3-phase reset
  hw/intc: Convert TYPE_KVM_ARM_GICV3 to 3-phase reset
  hw/intc: Convert TYPE_ARM_GICV3_COMMON to 3-phase reset
  hw/intc: Convert TYPE_ARM_GIC_KVM to 3-phase reset
  hw/intc: Convert TYPE_ARM_GIC_COMMON to 3-phase reset
  hw/arm: Convert TYPE_ARM_SMMUV3 to 3-phase reset
  hw/arm: Convert TYPE_ARM_SMMU to 3-phase reset
  target/arm: Report FEAT_EVT for TCG '-cpu max'
  target/arm: Implement HCR_EL2.TID4 traps
  target/arm: Implement HCR_EL2.TICAB,TOCU traps
  target/arm: Implement HCR_EL2.TTLBOS traps
  target/arm: Implement HCR_EL2.TTLBIS traps
  target/arm: Allow relevant HCR bits to be written for FEAT_EVT
  hw/intc/arm_gicv3: Fix GICD_TYPER ITLinesNumber advertisement
  target/arm: Add Cortex-A55 CPU
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15 17:40:57 +00:00
Thomas Huth
3d81e8cf0c hw/misc: Move some arm-related files from specific_ss into softmmu_ss
The header target/arm/kvm-consts.h checks CONFIG_KVM which is marked as
poisoned in common code, so the files that include this header have to
be added to specific_ss and recompiled for each, qemu-system-arm and
qemu-system-aarch64. However, since the kvm headers are only optionally
used in kvm-constants.h for some sanity checks, we can additionally
check the NEED_CPU_H macro first to avoid the poisoned CONFIG_KVM macro,
so kvm-constants.h can also be used from "common" files (without the
sanity checks - which should be OK since they are still done from other
target-specific files instead). This way, and by adjusting some other
include statements in the related files here and there, we can move some
files from specific_ss into softmmu_ss, so that they only need to be
compiled once during the build process.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221202154023.293614-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15 17:37:47 +00:00
Thomas Huth
c57e0ea6b4 hw: Include the VMWare devices only in the x86 targets
It seems a little bit weird that the para-virtualized x86 VMWare
devices "vmware-svga" and "vmxnet3" also show up in non-x86 targets.
They are likely pretty useless there (since the guest OSes likely
do not have any drivers for those enabled), so let's change this and
only enable those devices by default for the classical x86 targets.

Message-Id: <20221213095144.42355-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-12-15 15:19:24 +01:00
Matthew Rosato
03451953c7 s390x/pci: reset ISM passthrough devices on shutdown and system reset
ISM device firmware stores unique state information that can
can cause a wholesale unmap of the associated IOMMU (e.g. when
we get a termination signal for QEMU) to trigger firmware errors
because firmware believes we are attempting to invalidate entries
that are still in-use by the guest OS (when in fact that guest is
in the process of being terminated or rebooted).
To alleviate this, register both a shutdown notifier (for unexpected
termination cases e.g. virsh destroy) as well as a reset callback
(for cases like guest OS reboot).  For each of these scenarios, trigger
PCI device reset; this is enough to indicate to firmware that the IOMMU
is no longer in-use by the guest OS, making it safe to invalidate any
associated IOMMU entries.

Fixes: 15d0e7942d ("s390x/pci: don't fence interpreted devices without MSI-X")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20221209195700.263824-1-mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
[thuth: Adjusted the hunk in s390-pci-vfio.c due to different context]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-12-15 15:02:34 +01:00
Matthew Rosato
df202e3ff3 s390x/pci: shrink DMA aperture to be bound by vfio DMA limit
Currently, s390x-pci performs accounting against the vfio DMA
limit and triggers the guest to clean up mappings when the limit
is reached. Let's go a step further and also limit the size of
the supported DMA aperture reported to the guest based upon the
initial vfio DMA limit reported for the container (if less than
than the size reported by the firmware/host zPCI layer).  This
avoids processing sections of the guest DMA table during global
refresh that, for common use cases, will never be used anway, and
makes exhausting the vfio DMA limit due to mismatch between guest
aperture size and host limit far less likely and more indicitive
of an error.

Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20221028194758.204007-4-mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-12-15 15:02:34 +01:00
Matthew Rosato
ef536007c3 s390x/pci: coalesce unmap operations
Currently, each unmapped page is handled as an individual iommu
region notification.  Attempt to group contiguous unmap operations
into fewer notifications to reduce overhead.

Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20221028194758.204007-3-mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-12-15 15:02:34 +01:00
Schspa Shi
990f49cfd7 hw/arm/boot: set initrd with #address-cells type in fdt
We use 32bit value for linux,initrd-[start/end], when we have
loader_start > 4GB, there will be a wrong initrd_start passed
to the kernel, and the kernel will report the following warning.

[    0.000000] ------------[ cut here ]------------
[    0.000000] initrd not fully accessible via the linear mapping -- please check your bootloader ...
[    0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/mm/init.c:355 arm64_memblock_init+0x158/0x244
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G        W          6.1.0-rc3-13250-g30a0b95b1335-dirty #28
[    0.000000] Hardware name: Horizon Sigi Virtual development board (DT)
[    0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    0.000000] pc : arm64_memblock_init+0x158/0x244
[    0.000000] lr : arm64_memblock_init+0x158/0x244
[    0.000000] sp : ffff800009273df0
[    0.000000] x29: ffff800009273df0 x28: 0000001000cc0010 x27: 0000800000000000
[    0.000000] x26: 000000000050a3e2 x25: ffff800008b46000 x24: ffff800008b46000
[    0.000000] x23: ffff800008a53000 x22: ffff800009420000 x21: ffff800008a53000
[    0.000000] x20: 0000000004000000 x19: 0000000004000000 x18: 00000000ffff1020
[    0.000000] x17: 6568632065736165 x16: 6c70202d2d20676e x15: 697070616d207261
[    0.000000] x14: 656e696c20656874 x13: 0a2e2e2e20726564 x12: 0000000000000000
[    0.000000] x11: 0000000000000000 x10: 00000000ffffffff x9 : 0000000000000000
[    0.000000] x8 : 0000000000000000 x7 : 796c6c756620746f x6 : 6e20647274696e69
[    0.000000] x5 : ffff8000093c7c47 x4 : ffff800008a2102f x3 : ffff800009273a88
[    0.000000] x2 : 80000000fffff038 x1 : 00000000000000c0 x0 : 0000000000000056
[    0.000000] Call trace:
[    0.000000]  arm64_memblock_init+0x158/0x244
[    0.000000]  setup_arch+0x164/0x1cc
[    0.000000]  start_kernel+0x94/0x4ac
[    0.000000]  __primary_switched+0xb4/0xbc
[    0.000000] ---[ end trace 0000000000000000 ]---
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000001000000000-0x0000001007ffffff]

This doesn't affect any machine types we currently support, because
for all of our machine types the RAM starts well below the 4GB
mark, but it does demonstrate that we're not currently writing
the device-tree properties quite as intended.

To fix it, we can change it to write these values to the dtb using a
type width matching #address-cells.  This is the intended size for
these dtb properties, and is how u-boot, for instance, writes them,
although in practice the Linux kernel will cope with them being any
width as long as they're big enough to fit the value.

Signed-off-by: Schspa Shi <schspa@gmail.com>
Message-id: 20221129160724.75667-1-schspa@gmail.com
[PMM: tweaked commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15 11:18:20 +00:00
Peter Maydell
227b5866c0 hw/intc: Convert TYPE_KVM_ARM_ITS to 3-phase reset
Convert the TYPE_KVM_ARM_ITS device to 3-phase reset.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221109161444.3397405-10-peter.maydell@linaro.org
2022-12-15 11:18:20 +00:00
Peter Maydell
1bcb90762b hw/intc: Convert TYPE_ARM_GICV3_ITS to 3-phase reset
Convert the TYPE_ARM_GICV3_ITS device to 3-phase reset.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221109161444.3397405-9-peter.maydell@linaro.org
2022-12-15 11:18:20 +00:00
Peter Maydell
1f6887616f hw/intc: Convert TYPE_ARM_GICV3_ITS_COMMON to 3-phase reset
Convert the TYPE_ARM_GICV3_ITS_COMMON parent class to 3-phase reset.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221109161444.3397405-8-peter.maydell@linaro.org
2022-12-15 11:18:20 +00:00
Peter Maydell
823300f0fc hw/intc: Convert TYPE_KVM_ARM_GICV3 to 3-phase reset
Convert the TYPE_KVM_ARM_GICV3 device to 3-phase reset.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221109161444.3397405-7-peter.maydell@linaro.org
2022-12-15 11:18:20 +00:00
Peter Maydell
183cac319e hw/intc: Convert TYPE_ARM_GICV3_COMMON to 3-phase reset
Convert the TYPE_ARM_GICV3_COMMON parent class to 3-phase reset.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221109161444.3397405-6-peter.maydell@linaro.org
2022-12-15 11:18:20 +00:00
Peter Maydell
d39270b559 hw/intc: Convert TYPE_ARM_GIC_KVM to 3-phase reset
Now we have converted TYPE_ARM_GIC_COMMON, we can convert the
TYPE_ARM_GIC_KVM subclass to 3-phase reset.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221109161444.3397405-5-peter.maydell@linaro.org
2022-12-15 11:18:20 +00:00
Peter Maydell
fe3c6174f2 hw/intc: Convert TYPE_ARM_GIC_COMMON to 3-phase reset
Convert the TYPE_ARM_GIC_COMMON device to 3-phase reset.  This is a
simple no-behaviour-change conversion.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221109161444.3397405-4-peter.maydell@linaro.org
2022-12-15 11:18:20 +00:00
Peter Maydell
503819a347 hw/arm: Convert TYPE_ARM_SMMUV3 to 3-phase reset
Convert the TYPE_ARM_SMMUV3 device to 3-phase reset.  The legacy
reset method doesn't do anything that's invalid in the hold phase, so
the conversion only requires changing it to a hold phase method, and
using the 3-phase versions of the "save the parent reset method and
chain to it" code.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221109161444.3397405-3-peter.maydell@linaro.org
2022-12-15 11:18:20 +00:00
Peter Maydell
3c1a7c4197 hw/arm: Convert TYPE_ARM_SMMU to 3-phase reset
Convert the TYPE_ARM_SMMU device to 3-phase reset.  The legacy method
doesn't do anything that's invalid in the hold phase, so the
conversion is simple and not a behaviour change.

Note that we must convert this base class before we can convert the
TYPE_ARM_SMMUV3 subclass -- transitional support in Resettable
handles "chain to parent class reset" when the base class is 3-phase
and the subclass is still using legacy reset, but not the other way
around.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20221109161444.3397405-2-peter.maydell@linaro.org
2022-12-15 11:18:20 +00:00
Luke Starrett
58dff8f7ea hw/intc/arm_gicv3: Fix GICD_TYPER ITLinesNumber advertisement
The ARM GICv3 TRM describes that the ITLinesNumber field of GICD_TYPER
register:

"indicates the maximum SPI INTID that the GIC implementation supports"

As SPI #0 is absolute IRQ #32, the max SPI INTID should have accounted
for the internal 16x SGI's and 16x PPI's.  However, the original GICv3
model subtracted off the SGI/PPI.  Cosmetically this can be seen at OS
boot (Linux) showing 32 shy of what should be there, i.e.:

    [    0.000000] GICv3: 224 SPIs implemented

Though in hw/arm/virt.c, the machine is configured for 256 SPI's.  ARM
virt machine likely doesn't have a problem with this because the upper
32 IRQ's don't actually have anything meaningful wired. But, this does
become a functional issue on a custom use case which wants to make use
of these IRQ's.  Additionally, boot code (i.e. TF-A) will only init up
to the number (blocks of 32) that it believes to actually be there.

Signed-off-by: Luke Starrett <lukes@xsightlabs.com>
Message-id: AM9P193MB168473D99B761E204E032095D40D9@AM9P193MB1684.EURP193.PROD.OUTLOOK.COM
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15 11:18:19 +00:00
Timofey Kutergin
94bc3b067e target/arm: Add Cortex-A55 CPU
The Cortex-A55 is one of the newer armv8.2+ CPUs; in particular
it supports the Privileged Access Never (PAN) feature. Add
a model of this CPU, so you can use a CPU type on the virt
board that models a specific real hardware CPU, rather than
having to use the QEMU-specific "max" CPU type.

Signed-off-by: Timofey Kutergin <tkutergin@gmail.com>
Message-id: 20221121150819.2782817-1-tkutergin@gmail.com
[PMM: tweaked commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15 11:18:19 +00:00
Mihai Carabas
0a0044b181 hw/arm/virt: build SMBIOS 19 table
Use the base_memmap to build the SMBIOS 19 table which provides the address
mapping for a Physical Memory Array (from spec [1] chapter 7.20).

This was present on i386 from commit c97294ec1b
("SMBIOS: Build aggregate smbios tables and entry point").

[1] https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.5.0.pdf

The absence of this table is a breach of the specs and is
detected by the FirmwareTestSuite (FWTS), but it doesn't
cause any known problems for guest OSes.

Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Message-id: 1668789029-5432-1-git-send-email-mihai.carabas@oracle.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15 11:18:19 +00:00
Gavin Shan
6a48c64eec hw/arm/virt: Add properties to disable high memory regions
The 3 high memory regions are usually enabled by default, but they may
be not used. For example, VIRT_HIGH_GIC_REDIST2 isn't needed by GICv2.
This leads to waste in the PA space.

Add properties ("highmem-redists", "highmem-ecam", "highmem-mmio") to
allow users selectively disable them if needed. After that, the high
memory region for GICv3 or GICv4 redistributor can be disabled by user,
the number of maximal supported CPUs needs to be calculated based on
'vms->highmem_redists'. The follow-up error message is also improved
to indicate if the high memory region for GICv3 and GICv4 has been
enabled or not.

Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20221029224307.138822-8-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15 11:18:19 +00:00
Gavin Shan
f40408a9fe hw/arm/virt: Add 'compact-highmem' property
After the improvement to high memory region address assignment is
applied, the memory layout can be changed, introducing possible
migration breakage. For example, VIRT_HIGH_PCIE_MMIO memory region
is disabled or enabled when the optimization is applied or not, with
the following configuration. The configuration is only achievable by
modifying the source code until more properties are added to allow
users selectively disable those high memory regions.

  pa_bits              = 40;
  vms->highmem_redists = false;
  vms->highmem_ecam    = false;
  vms->highmem_mmio    = true;

  # qemu-system-aarch64 -accel kvm -cpu host    \
    -machine virt-7.2,compact-highmem={on, off} \
    -m 4G,maxmem=511G -monitor stdio

  Region             compact-highmem=off         compact-highmem=on
  ----------------------------------------------------------------
  MEM                [1GB         512GB]        [1GB         512GB]
  HIGH_GIC_REDISTS2  [512GB       512GB+64MB]   [disabled]
  HIGH_PCIE_ECAM     [512GB+256MB 512GB+512MB]  [disabled]
  HIGH_PCIE_MMIO     [disabled]                 [512GB       1TB]

In order to keep backwords compatibility, we need to disable the
optimization on machine, which is virt-7.1 or ealier than it. It
means the optimization is enabled by default from virt-7.2. Besides,
'compact-highmem' property is added so that the optimization can be
explicitly enabled or disabled on all machine types by users.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-id: 20221029224307.138822-7-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15 11:18:19 +00:00
Gavin Shan
4a4ff9edc6 hw/arm/virt: Improve high memory region address assignment
There are three high memory regions, which are VIRT_HIGH_REDIST2,
VIRT_HIGH_PCIE_ECAM and VIRT_HIGH_PCIE_MMIO. Their base addresses
are floating on highest RAM address. However, they can be disabled
in several cases.

(1) One specific high memory region is likely to be disabled by
    code by toggling vms->highmem_{redists, ecam, mmio}.

(2) VIRT_HIGH_PCIE_ECAM region is disabled on machine, which is
    'virt-2.12' or ealier than it.

(3) VIRT_HIGH_PCIE_ECAM region is disabled when firmware is loaded
    on 32-bits system.

(4) One specific high memory region is disabled when it breaks the
    PA space limit.

The current implementation of virt_set_{memmap, high_memmap}() isn't
optimized because the high memory region's PA space is always reserved,
regardless of whatever the actual state in the corresponding
vms->highmem_{redists, ecam, mmio} flag. In the code, 'base' and
'vms->highest_gpa' are always increased for case (1), (2) and (3).
It's unnecessary since the assigned PA space for the disabled high
memory region won't be used afterwards.

Improve the address assignment for those three high memory region by
skipping the address assignment for one specific high memory region if
it has been disabled in case (1), (2) and (3). The memory layout may
be changed after the improvement is applied, which leads to potential
migration breakage. So 'vms->highmem_compact' is added to control if
the improvement should be applied. For now, 'vms->highmem_compact' is
set to false, meaning that we don't have memory layout change until it
becomes configurable through property 'compact-highmem' in next patch.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-id: 20221029224307.138822-6-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15 11:18:19 +00:00
Gavin Shan
a5cb1350b1 hw/arm/virt: Introduce virt_get_high_memmap_enabled() helper
This introduces virt_get_high_memmap_enabled() helper, which returns
the pointer to vms->highmem_{redists, ecam, mmio}. The pointer will
be used in the subsequent patches.

No functional change intended.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-id: 20221029224307.138822-5-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15 11:18:19 +00:00
Gavin Shan
fa245799b9 hw/arm/virt: Introduce variable region_base in virt_set_high_memmap()
This introduces variable 'region_base' for the base address of the
specific high memory region. It's the preparatory work to optimize
high memory region address assignment.

No functional change intended.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-id: 20221029224307.138822-4-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15 11:18:19 +00:00
Gavin Shan
370bea9d1c hw/arm/virt: Rename variable size to region_size in virt_set_high_memmap()
This renames variable 'size' to 'region_size' in virt_set_high_memmap().
Its counterpart ('region_base') will be introduced in next patch.

No functional change intended.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-id: 20221029224307.138822-3-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15 11:18:19 +00:00
Gavin Shan
4af6b6edec hw/arm/virt: Introduce virt_set_high_memmap() helper
This introduces virt_set_high_memmap() helper. The logic of high
memory region address assignment is moved to the helper. The intention
is to make the subsequent optimization for high memory region address
assignment easier.

No functional change intended.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-id: 20221029224307.138822-2-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15 11:18:19 +00:00
Peter Maydell
48804eebd4 Miscellaneous patches for 2022-12-14
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmOZ6lYSHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZT6VEQAKynjWh3AIZ4/qOgrVqsP0oRspevLmfH
 BbuGoldjYpEE7RbwuCaZalZ7iy7TcSySxnPfUDVsFHd7NWffJVjwKHifGC0D/Ez0
 +Ggyb1CBebN+mS7t+BNFUHdMM+wxFIlHwg4f4aTFbn2o0HKgj2a8tcNzNRonZbfa
 xURnvbD4G4u0VZEc3Jak+x193xbOJFsuuWq0BZnDuNk+XqjyW2RwfpXLPJVk+82a
 4uy/YgYuqXUqBeULwcJj+shBL4SXR9GyajTFMS64przSUle0ADUmXkPtaS2agV7e
 Pym/UQuAcxvNyw34fJsiMZxx6rZI9YU30jQUMRLoYcPRR/Q/aiPeiiHtiD6Kaid7
 IfOeH/EArXaQRFpD89xj4YcaTnRLQOEj0NXgXvAbQf6eD8JYyao/S/0lCsPZEoA2
 nibLqEQ25ncDNXoSomuwtfjVff3w68lODFbhwqfA0gf3cPtCgVZ6xQ8P/McNY6K6
 wqFHXMWTDHk1LOCTucjYz1z2TGzTnSG4iWi5Yt6FSxAc958AO+v5ALn/1pcYun+E
 azM/MF0AInKj2aJCT530zT0tpCs/Jo07YKC8k6ubi77S0ZdmGS1XLeXkRXfk1+yI
 OhuUgiVlSTHxD69DagT2vbnx1mDMM9X+OBIMvEi5nwvD9A/ghaCgkDeGFvbA1ud0
 t0mxPBZJ+tiZ
 =JJjG
 -----END PGP SIGNATURE-----

Merge tag 'pull-misc-2022-12-14' of https://repo.or.cz/qemu/armbru into staging

Miscellaneous patches for 2022-12-14

# gpg: Signature made Wed 14 Dec 2022 15:23:02 GMT
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* tag 'pull-misc-2022-12-14' of https://repo.or.cz/qemu/armbru:
  ppc4xx_sdram: Simplify sdram_ddr_size() to return
  block/vmdk: Simplify vmdk_co_create() to return directly
  cleanup: Tweak and re-run return_directly.cocci
  io: Tidy up fat-fingered parameter name
  qapi: Use returned bool to check for failure (again)
  sockets: Use ERRP_GUARD() where obviously appropriate
  qemu-config: Use ERRP_GUARD() where obviously appropriate
  qemu-config: Make config_parse_qdict() return bool
  monitor: Use ERRP_GUARD() in monitor_init()
  monitor: Simplify monitor_fd_param()'s error handling
  error: Move ERRP_GUARD() to the beginning of the function
  error: Drop a few superfluous ERRP_GUARD()
  error: Drop some obviously superfluous error_propagate()
  Drop more useless casts from void * to pointer

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15 10:13:46 +00:00