qdev_device_help() is used from command line "-device help", or from
HMP "device_add". If used from command line, print help to stdout
(it is only printed on explicit demand).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
@cur_mon is null unless the main thread is running monitor code, either
HMP code within monitor_read(), or QMP code within
monitor_qmp_dispatch().
Use of @cur_mon outside the main thread is therefore unsafe.
Most of its uses are in monitor command handlers. These run in the main
thread.
However, there are also uses hiding elsewhere, such as in
error_vprintf(), and thus error_report(), making these functions unsafe
outside the main thread. No such unsafe uses are known at this time.
Regardless, this is an unnecessary trap. It's an ancient trap, though.
More recently, commit cf869d5317 "qmp: support out-of-band (oob)
execution" spiced things up: the monitor I/O thread assigns to @cur_mon
when executing commands out-of-band. Having two threads save, set and
restore @cur_mon without synchronization is definitely unsafe. We can
end up with @cur_mon null while the main thread runs monitor code, or
non-null while it runs non-monitor code.
We could fix this by making the I/O thread not mess with @cur_mon, but
that would leave the trap armed and ready.
Instead, make @cur_mon thread-local. It's now reliably null unless the
thread is running monitor code.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[peterx: update subject and commit message written by Markus]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180720033451.32710-1-peterx@redhat.com>
Add new parameter to optionally enable Out-Of-Band for a QMP server.
An example command line:
./qemu-system-x86_64 -chardev stdio,id=char0 \
-mon chardev=char0,mode=control,x-oob=on
By default, Out-Of-Band is off.
It is not allowed if either MUX or non-QMP is detected, since
Out-Of-Band is currently only for QMP, and non-MUX chardev backends.
Note that the client STILL has to request 'oob' during qmp_capabilities;
in part because the x-oob command line option may disappear in the
future if we decide the capabilities negotiation is sufficient.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180326063901.27425-4-peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: enhance commit message]
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
There are many places where the monitor initializes its globals:
- monitor_init_qmp_commands() at the very beginning
- single function to init monitor_lock
- in the first entry of monitor_init() using "is_first_init"
Unify them a bit.
monitor_lock is not used before monitor_init() (as confirmed by code
analysis and gdb watchpoints); so we are safe delaying what was a
constructor-time initialization of the mutex into the later first call
to monitor_init().
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-8-peterx@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous commit improved compile time by including less of the
generated QAPI headers. This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.
Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.
It's possible everywhere, except:
* monitor.c needs qmp-command.h to get qmp_init_marshal()
* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
qapi-event.h to get enum QAPIEvent
Perhaps we'll get rid of those some other day.
Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
Now that qcow & qcow2 are wired up to get encryption keys
via the QCryptoSecret object, nothing is relying on the
interactive prompting for passwords. All the code related
to password prompting can thus be ripped out.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-17-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The way we get QMP commands registered is high tech:
* qapi-commands.py generates qmp_init_marshal() that does the actual work
* it also generates the magic to register it as a MODULE_INIT_QAPI
function, so it runs when someone calls
module_call_init(MODULE_INIT_QAPI)
* main() calls module_call_init()
QEMU needs to register a few non-qapified commands. Same high tech
works: monitor.c has its own qmp_init_marshal() along with the magic
to make it run in module_call_init(MODULE_INIT_QAPI).
QEMU also needs to unregister commands that are not wanted in this
build's configuration (commit 5032a16). Simple enough:
qmp_unregister_commands_hack(). The difficulty is to make it run
after the generated qmp_init_marshal(). We can't simply run it in
monitor.c's qmp_init_marshal(), because the order in which the
registered functions run is indeterminate. So qmp_init_marshal()
registers qmp_unregister_commands_hack() separately. Since
registering *appends* to the list of registered functions, this will
make it run after all the functions that have been registered already.
I suspect it takes a long and expensive computer science education to
not find this silly.
Dumb it down as follows:
* Drop MODULE_INIT_QAPI entirely
* Give the generated qmp_init_marshal() external linkage.
* Call it instead of module_call_init(MODULE_INIT_QAPI)
* Except in QEMU proper, call new monitor_init_qmp_commands() that in
turn calls the generated qmp_init_marshal(), registers the
additional commands and unregisters the unwanted ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-5-git-send-email-armbru@redhat.com>
Pick a uniform chardev type name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to have an easy way to add a new qdev with a specific id
carve out the needed functionality from qdev_device_add() into a new
function qdev_set_id().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
This option does nothing since commit 06ac27f. Deprecate it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since aa5cb7f5e, the chardevs are being cleaned up when leaving
qemu. However, the monitor has still references to them, which may
lead to crashes when running atexit() and trying to send monitor
events:
#0 0x00007fffdb18f6f5 in __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:54
#1 0x00007fffdb1912fa in __GI_abort () at abort.c:89
#2 0x0000555555c263e7 in error_exit (err=22, msg=0x555555d47980 <__func__.13537> "qemu_mutex_lock") at util/qemu-thread-posix.c:39
#3 0x0000555555c26488 in qemu_mutex_lock (mutex=0x5555567a2420) at util/qemu-thread-posix.c:66
#4 0x00005555558c52db in qemu_chr_fe_write (s=0x5555567a2420, buf=0x55555740dc40 "{\"timestamp\": {\"seconds\": 1470041716, \"microseconds\": 989699}, \"event\": \"SPICE_DISCONNECTED\", \"data\": {\"server\": {\"port\": \"5900\", \"family\": \"ipv4\", \"host\": \"127.0.0.1\"}, \"client\": {\"port\": \"40272\", \"f"..., len=240) at qemu-char.c:280
#5 0x0000555555787cad in monitor_flush_locked (mon=0x5555567bd9e0) at /home/elmarco/src/qemu/monitor.c:311
#6 0x0000555555787e46 in monitor_puts (mon=0x5555567bd9e0, str=0x5555567a44ef "") at /home/elmarco/src/qemu/monitor.c:353
#7 0x00005555557880fe in monitor_json_emitter (mon=0x5555567bd9e0, data=0x5555567c73a0) at /home/elmarco/src/qemu/monitor.c:401
#8 0x00005555557882d2 in monitor_qapi_event_emit (event=QAPI_EVENT_SPICE_DISCONNECTED, qdict=0x5555567c73a0) at /home/elmarco/src/qemu/monitor.c:472
#9 0x000055555578838f in monitor_qapi_event_queue (event=QAPI_EVENT_SPICE_DISCONNECTED, qdict=0x5555567c73a0, errp=0x7fffffffca88) at /home/elmarco/src/qemu/monitor.c:497
#10 0x0000555555c15541 in qapi_event_send_spice_disconnected (server=0x5555571139d0, client=0x5555570d0db0, errp=0x5555566c0428 <error_abort>) at qapi-event.c:1038
#11 0x0000555555b11bc6 in channel_event (event=3, info=0x5555570d6c00) at ui/spice-core.c:248
#12 0x00007fffdcc9983a in adapter_channel_event (event=3, info=0x5555570d6c00) at reds.c:120
#13 0x00007fffdcc99a25 in reds_handle_channel_event (reds=0x5555567a9d60, event=3, info=0x5555570d6c00) at reds.c:324
#14 0x00007fffdcc7d4c4 in main_dispatcher_self_handle_channel_event (self=0x5555567b28b0, event=3, info=0x5555570d6c00) at main-dispatcher.c:175
#15 0x00007fffdcc7d5b1 in main_dispatcher_channel_event (self=0x5555567b28b0, event=3, info=0x5555570d6c00) at main-dispatcher.c:194
#16 0x00007fffdcca7674 in reds_stream_push_channel_event (s=0x5555570d9910, event=3) at reds-stream.c:354
#17 0x00007fffdcca749b in reds_stream_free (s=0x5555570d9910) at reds-stream.c:323
#18 0x00007fffdccb5dad in snd_disconnect_channel (channel=0x5555576a89a0) at sound.c:229
#19 0x00007fffdccb9e57 in snd_detach_common (worker=0x555557739720) at sound.c:1589
#20 0x00007fffdccb9f0e in snd_detach_playback (sin=0x5555569fe3f8) at sound.c:1602
#21 0x00007fffdcca3373 in spice_server_remove_interface (sin=0x5555569fe3f8) at reds.c:3387
#22 0x00005555558ff6e2 in line_out_fini (hw=0x5555569fe370) at audio/spiceaudio.c:152
#23 0x00005555558f909e in audio_atexit () at audio/audio.c:1754
#24 0x00007fffdb1941e8 in __run_exit_handlers (status=0, listp=0x7fffdb5175d8 <__exit_funcs>, run_list_atexit=run_list_atexit@entry=true) at exit.c:82
#25 0x00007fffdb194235 in __GI_exit (status=<optimized out>) at exit.c:104
#26 0x00007fffdb17b738 in __libc_start_main (main=0x5555558d7874 <main>, argc=67, argv=0x7fffffffcf48, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fffffffcf38) at ../csu/libc-start.c:323
Add a monitor_cleanup() functions to remove all the monitors before
cleaning up the chardev. Note that we are "losing" some events that
used to be sent during atexit().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160801112343.29082-2-marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Header guard symbols should match their file name to make guard
collisions less likely. Offenders found with
scripts/clean-header-guards.pl -vn.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Re-run scripts/clean-includes to apply the previous commit's
corrections and updates. Besides redundant qemu/typedefs.h, this only
finds a redundant config-host.h include in ui/egl-helpers.c. No idea
how that escaped the previous runs.
Some manual whitespace trimming around dropped includes squashed in.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The QMP monitor code has two helper methods object_add
and qmp_object_del that are called from several places
in the code (QMP, HMP and main emulator startup).
The HMP and main emulator startup code also share
further logic that extracts the qom-type & id
values from a qdict.
We soon need to use this logic from qemu-img, qemu-io
and qemu-nbd too, but don't want those to depend on
the monitor, nor do we want to duplicate the code.
To avoid this, move some code out of qmp.c and hmp.c
adding new methods to qom/object_interfaces.c
- user_creatable_add - takes a QDict holding a full
object definition & instantiates it
- user_creatable_add_type - takes an ID, type name,
and QDict holding object properties & instantiates
it
- user_creatable_add_opts - takes a QemuOpts holding
a full object definition & instantiates it
- user_creatable_add_opts_foreach - variant on
user_creatable_add_opts which can be directly used
in conjunction with qemu_opts_foreach.
- user_creatable_del - takes an ID and deletes the
corresponding object
The existing code is updated to use these new methods.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At the moment get_monitor_def() returns only registers from statically
defined monitor_defs array. However there is a lot of BOOK3S SPRs
which are not in the list and cannot be printed from the monitor.
This adds a new target platform hook - target_get_monitor_def().
The hook is called if a register was not found in the static
array returned by the target_monitor_defs() hook.
The hook is only defined for POWERPC, it returns registered
SPRs and fails on unregistered ones providing the user with information
on what is actually supported on the running CPU. The register value is
saved as uint64_t as it is the biggest supported register size;
target_ulong cannot be used because of the stub - it is in a "common"
code and cannot include "cpu.h", etc; this is also why the hook prototype
is redefined in the stub instead of being included from some header.
This replaces static descriptors for GPRs, FPRs, SRs with a helper which
looks for a value in a corresponding array in the CPUPPCState.
The immediate effect is that all 32 SRs can be printed now (instead of 16);
later this can be reused for VSX or TM registers.
This replaces callbacks for MSR and XER with static descriptors in
monitor_defs as they are stored in CPUPPCState.
While we are here, this adds "cr" as a synonym of "ccr".
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
monitor_fprintf and mon_get_cpu will be used in the target-specific monitor,
so it is advisable to make it external.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1442927901-1084-6-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the previous commit, the generated marshalers just work, and save
us a bit of handwritten code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-23-git-send-email-armbru@redhat.com>
Move target-specific code out of /monitor.c to /target-*/monitor.c,
this will avoid code cluttering and using random ifdeffery. The solution
is quite simple, but solves the issue of the separation of target-specific
code from monitor.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-3-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Remove it except for two things in qerror.h:
* Two #include to be cleaned up separately to avoid cluttering this
patch.
* The QERR_ macros. Mark as obsolete.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
The traditional QMP command handler interface
int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data);
doesn't provide for returning an Error object. Instead, the handler
is expected to stash it in the monitor with qerror_report().
When we rebased QMP on top of QAPI, we didn't change this interface.
Instead, commit 776574d introduced "middle mode" as a temporary aid
for converting existing QMP commands to QAPI one by one. More than
three years later, we're still using it.
Middle mode has two effects:
* Instead of the native input marshallers
static void qmp_marshal_input_FOO(QDict *, QObject **, Error **)
it generates input marshallers conforming to the traditional QMP
command handler interface.
* It suppresses generation of code to register them with
qmp_register_command()
This permits giving them internal linkage.
As long as we need qmp-commands.hx, we can't use the registry behind
qmp_register_command(), so the latter has to stay for now.
The former has to go to get rid of qerror_report(). Changing all QMP
commands to fit the QAPI mold in one go was impractical back when we
started, but by now there are just a few stragglers left:
do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(),
qmp_netdev_add(), do_device_add().
Switch middle mode to generate native input marshallers, and adapt the
stragglers. Simplifies both the monitor code and the stragglers.
Rename do_qmp_capabilities() to qmp_capabilities(), and
do_device_add() to qmp_device_add, because that's how QMP command
handlers are named today.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Also polish an error message while I'm touching the line anyway,
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Setting QEMU_AUDIO_LOG_TO_MONITOR=1 can crash qemu (if qemu tries to log
to the monitor before it's being initialized), and also nothing else in
qemu logs to the monitor.
This log to monitor feature was the last thing that used the default_mon
variable, so I removed it too (as using it can cause problems).
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The asynchronous monitor command interface goes back to commit 940cc30
(Jan 2010). Added a third case to command execution. The hope back
then according to the commit message was that all commands get
converted to the asynchronous interface, killing off the other two
cases. Didn't happen.
The initial asynchronous commands balloon and info balloon were
converted back to synchronous long ago (commit 96637bc and d72f32),
with commit messages calling the asynchronous interface "not fully
working" and "deprecated". The only other user went away in commit
3b5704b.
New code generally uses synchronous commands and asynchronous events.
What exactly is still "not fully working" with asynchronous commands?
Well, here's a bug that defeats actual asynchronous use pretty
reliably: the reply's ID is wrong (and has always been wrong) unless
you use the command synchronously! To reproduce, we need an
asynchronous command, so we have to go back before commit 3b5704b.
Run QEMU with spice:
$ qemu-system-x86_64 -nodefaults -S -spice port=5900,disable-ticketing -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 94, "minor": 2, "major": 2}, "package": ""}, "capabilities": []}}
Connect a spice client in another terminal:
$ remote-viewer spice://localhost:5900
Set up a migration destination dummy in a third terminal:
$ socat TCP-LISTEN:12345 STDIO
Now paste the following into the QMP monitor:
{ "execute": "qmp_capabilities", "id": "i0" }
{ "execute": "client_migrate_info", "id": "i1", "arguments": { "protocol": "spice", "hostname": "localhost", "port": 12345 } }
{ "execute": "query-kvm", "id": "i2" }
Produces two replies immediately, one to qmp_capabilities, and one to
query-kvm:
{"return": {}, "id": "i0"}
{"return": {"enabled": false, "present": true}, "id": "i2"}
Both are correct. Two lines of debug output from libspice-server not
shown.
Now EOF socat's standard input to make it close the connection. This
makes the asynchronous client_migrate_info complete. It replies:
{"return": {}}
Bug: "id": "i1" is missing. Two lines of debug output from
libspice-server not shown. Cherry on top: storage for the missing ID
is leaked.
Get rid of this stuff before somebody hurts himself with it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
The functions ringbuf_read_completion() and monitor_get_rs()
are not used anywhere anymore, so let's remove them.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
To complement qdev's bus-oriented info qtree, info qom-tree
prints a hierarchical view of the QOM composition tree.
By default, the machine composition tree is shown. This can be overriden
by supplying a path argument, such as "info qom-tree /".
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some are called do_info_SUBCOMMAND() (old ones, usually), some
hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND
pointlessly differs in spelling.
Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the
subcommand name with '-' replaced by '_'.
Exceptions:
* sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(),
sun4m_hmp_info_pic().
* lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(),
lm32_hmp_info_pic().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
monitor_handle_fd_param() is a wrapper around
monitor_handle_fd_param2() that feeds errors to qerror_report_err()
instead of returning them. qerror_report_err() is inappropriate in
many contexts. monitor_handle_fd_param() looks simpler than
monitor_handle_fd_param2(), which tempts use. Remove the temptation:
drop the wrapper and open-code the (trivial) error handling instead.
Replace the open-coded qerror_report_err() by error_report_err() in
places that already use error_report(). Turns out that's everywhere.
While there, rename monitor_handle_fd_param2() to monitor_fd_param().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
I'll use it with block backends shortly, and the name is going to fit
badly there. It's a block layer thing anyway, not just a block driver
thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The function monitor_fdset_dup_fd_find_remove() references member of
'mon_fdset' which - when remove flag is set - may be freed in function
monitor_fdset_cleanup().
remove is set by monitor_fdset_dup_fd_remove which in practice
does not need the returned value, so make it void,
and return -1 from monitor_fdset_dup_fd_find_remove.
Reported-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
emits event when ACPI OSPM evaluates _OST method
of ACPI device.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
and rebase monitor_handle_fd_param() to it. (Note that this will slightly
change the behavior when the qemu_parse_fd() branch is selected and it
fails: we now report (and in case of QMP, set) the error immediately,
rather than allowing the caller to set its own error message (if any)).
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This patchset enables the core of the quorum mechanism.
The num_children reads are compared to get the majority version and if this
version exists more than threshold times the guest won't see the error at all.
If a block is corrupted or if an error occurs during an IO or if the quorum
cannot be established QMP events are used to report to the management.
Use gnutls's SHA-256 to compare versions.
--enable-quorum must be used to enable the feature.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that the monitor and readline are decoupled, readline.h no longer
belongs in include/monitor/. Put the header into include/qemu/.
Move the source file into util/ so it can be linked as part of
libqemuutil.a.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make the readline.c functionality reusable. Instead of calling
monitor_printf() and monitor_flush() directly, invoke function pointers
provided by the user.
This way readline.c does not know about Monitor and other users will be
able to make use of readline.c.
Note that there is already an "opaque" argument to the ReadLineFunc
callback. Consistently call it "readline_opaque" from now on to
distinguish from the ReadLinePrintfFunc/ReadLineFlushFunc "opaque"
argument.
I also dropped the printf macro trickery since it's now highly unlikely
that anyone modifying readline.c would call printf(3) directly. We no
longer need this protection.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add two commands that are the monitor counterparts of -object. The commands
have the same Visitor-based implementation, but use different kinds of
visitors so that the HMP command has a DWIM string-based syntax, while
the QMP variant accepts a stricter JSON-based properties dictionary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Two new functions are added; the first one checks a given range in the
image file for overlaps with metadata (main header, L1 tables, L2
tables, refcount table and blocks).
The second one should be used immediately before writing to the image
file as it calls the first function and, upon collision, marks the
image as corrupt and makes the BDS unusable, thereby preventing
further access.
Both functions take a bitmask argument specifying the structures which
should be checked for overlaps, making it possible to also check
metadata writes against colliding with other structures.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Parameter *mon is added, and local variable *mon added in previous patch
is removed. The caller readline_completion(), pass rs->mon as value, which
should be initialized in readline_init() called by monitor_init().
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
