Single opcode instructions in ff group were incorrectly processed
because an overrun of _decode_tbl1[0xff] resulted in access of
_decode_tbl2[0x0]. Thus, decode_sldtgroup was called instead of
decode_ffgroup:
7d71: decode_sldtgroup: 1
Unimplemented handler (7d71) for 108 (ff 0)
While at it correct maximum length for _decode_tbl2 and _decode_tbl3.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes a TCG crash due to attempting the atomic operation without
having set up the address first. This does not attempt to fix
all of the other missing checks for LOCK.
Fixes: a7cee522f3
Fixes: https://bugs.launchpad.net/qemu/+bug/1803160
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20181113193510.24862-1-richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is really no difference between live migration and savevm, except
that savevm does not require bdrv_invalidate_cache to be implemented
by all disks. However, it is unlikely that savevm is used with anything
except qcow2 disks, so the penalty is small and worth the improvement
in catching bad usage of savevm.
Only one place was taking care of savevm when adding a migration blocker,
and it can be removed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nested VMX does not support live migration yet. Add a blocker
until that is worked out.
Nested SVM only does not support it, but unfortunately it is
enabled by default for -cpu host so we cannot really disable it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When writing to guest's MSR_IA32_ARCH_CAPABILITIES, check whether it's
supported in the guest using the KVM_GET_MSR_INDEX_LIST ioctl.
Fixes: d86f963694
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: balducci@units.it
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-Id: <jpg4lc4iiav.fsf_-_@linux.bootlegged.copy>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Fix the SYSCALL instruction in 64-bit (long mode). The RF flag
should be cleared in R11 as well as in the RFLAGS. Intel
and AMD CPUs behave same. AMD has this documented in the
APM vol 3.
Signed-off-by: Roman Kapl <rka@sysgo.com>
Signed-off-by: Rudolf Marek <rudolf.marek@sysgo.com>
Message-Id: <20181019122449.26387-1-rka@sysgo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adds a new CPU flag to enable the Enlightened VMCS KVM feature.
QEMU enables KVM_CAP_HYPERV_ENLIGHTENED_VMCS and gets back the
version to be advertised in lower 16 bits of CPUID.0x4000000A:EAX.
Suggested-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20181022165506.30332-3-vkuznets@redhat.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As the release document ref below link (page 13):
https://software.intel.com/sites/default/files/managed/c5/15/\
architecture-instruction-set-extensions-programming-reference.pdf
PKU is supported in Skylake Server (Only Server) and later, and
on Intel(R) Xeon(R) Processor Scalable Family. So PKU is supposed
to be in Skylake-Server CPU model. And PKU's CPUID has been
exposed to QEMU. But PKU can't be find in Skylake-Server CPU
model in the code. So this patch will fix this issue in
Skylake-Server CPU model.
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <5014b57f834dcfa8fd3781504d98dcf063d54fde.1540801392.git.tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
New CPU models mostly inherit features from ancestor Skylake-Server,
while addin new features: AVX512_VNNI, Intel PT.
SSBD support for speculative execution
side channel mitigations.
Note:
On Cascadelake, some capabilities (RDCL_NO, IBRS_ALL, RSBA,
SKIP_L1DFL_VMENTRY and SSB_NO) are enumerated by MSR.
These features rely on MSR based feature support patch.
Will be added later after that patch's in.
http://lists.nongnu.org/archive/html/qemu-devel/2018-09/msg00074.html
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20180919031122.28487-2-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Note RSBA is specially treated -- no matter host support it or not, qemu
pretends it is supported.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1539578845-37944-4-git-send-email-robert.hu@linux.intel.com>
[ehabkost: removed automatic enabling of RSBA]
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add kvm_get_supported_feature_msrs() to get supported MSR feature index list.
Add kvm_arch_get_supported_msr_feature() to get each MSR features value.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1539578845-37944-2-git-send-email-robert.hu@linux.intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Remove a debugging hack which could be used to cause the
undocumented 'icebp' instruction to enable QEMU internal
debug logging. This code has always been #ifdeffed out
since it was introduced in commit aba9d61e34 in 2005;
judging by the rest of that commit (which is entirely
unrelated) it may have even been committed by accident.
(Note that WANT_ICEBP is not defined by default anyway.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20181009183314.13416-1-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Intel SDM says for CPUID function 0DH, sub-function 0:
| • ECX enumerates the size (in bytes) required by the XSAVE instruction for an
| XSAVE area containing all the user state components supported by this
| processor.
| • EBX enumerates the size (in bytes) required by the XSAVE instruction for an
| XSAVE area containing all the user state components corresponding to bits
| currently set in XCR0.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Message-Id: <20180928104319.3296-1-bigeasy@linutronix.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
-----BEGIN PGP SIGNATURE-----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=kPZX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-10-22' into staging
Error reporting patches for 2018-10-22
# gpg: Signature made Mon 22 Oct 2018 13:20:23 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-error-2018-10-22: (40 commits)
error: Drop bogus "use error_setg() instead" admonitions
vpc: Fail open on bad header checksum
block: Clean up bdrv_img_create()'s error reporting
vl: Simplify call of parse_name()
vl: Fix exit status for -drive format=help
blockdev: Convert drive_new() to Error
vl: Assert drive_new() does not fail in default_drive()
fsdev: Clean up error reporting in qemu_fsdev_add()
spice: Clean up error reporting in add_channel()
tpm: Clean up error reporting in tpm_init_tpmdev()
numa: Clean up error reporting in parse_numa()
vnc: Clean up error reporting in vnc_init_func()
ui: Convert vnc_display_init(), init_keyboard_layout() to Error
ui/keymaps: Fix handling of erroneous include files
vl: Clean up error reporting in device_init_func()
vl: Clean up error reporting in parse_fw_cfg()
vl: Clean up error reporting in mon_init_func()
vl: Clean up error reporting in machine_set_property()
vl: Clean up error reporting in chardev_init_func()
qom: Clean up error reporting in user_creatable_add_opts_foreach()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Calling error_report() in a function that takes an Error ** argument
is suspicious. Convert a few that are actually warnings to
warn_report().
While there, split a warning consisting of multiple sentences to
conform to conventions spelled out in warn_report()'s contract.
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Fam Zheng <famz@redhat.com>
Cc: Wei Huang <wei@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20181017082702.5581-5-armbru@redhat.com>
When migrate_add_blocker failed, the invtsc_mig_blocker is not
appended so no need to remove. This can save several instructions.
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20181006091816.7659-1-liq3ea@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add handling of POST_MESSAGE hypercall. For that, add an interface to
regsiter a handler for the messages arrived from the guest on a
particular connection id (IOW set up a message connection in Hyper-V
speak).
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-10-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add handling of SIGNAL_EVENT hypercall. For that, provide an interface
to associate an EventNotifier with an event connection number, so that
it's signaled when the SIGNAL_EVENT hypercall with the matching
connection ID is called by the guest.
Support for using KVM functionality for this will be added in a followup
patch.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-8-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Per Hyper-V spec, SynIC message and event flag pages are to be
implemented as so called overlay pages. That is, they are owned by the
hypervisor and, when mapped into the guest physical address space,
overlay the guest physical pages such that
1) the overlaid guest page becomes invisible to the guest CPUs until the
overlay page is turned off
2) the contents of the overlay page is preserved when it's turned off
and back on, even at a different address; it's only zeroed at vcpu
reset
This particular nature of SynIC message and event flag pages is ignored
in the current code, and guest physical pages are used directly instead.
This happens to (mostly) work because the actual guests seem not to
depend on the features listed above.
This patch implements those pages as the spec mandates.
Since the extra RAM regions, which introduce migration incompatibility,
are only added at SynIC object creation which only happens when
hyperv_synic_kvm_only == false, no extra compat logic is necessary.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-5-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Certain configurations do not allow SynIC to be used in QEMU. In
particular,
- when hyperv_vpindex is off, SINT routes can't be used as they refer to
the destination vCPU by vp_index
- older KVM (which doesn't expose KVM_CAP_HYPERV_SYNIC2) zeroes out
SynIC message and event pages on every msr load, breaking migration
OTOH in-KVM users of SynIC -- SynIC timers -- do work in those
configurations, and we shouldn't stop the guest from using them.
To cover both scenarios, introduce an X86CPU property that makes CPU
init code to skip creation of the SynIC object (and thus disables any
SynIC use in QEMU) but keeps the KVM part of the SynIC working.
The property is clear by default but is set via compat logic for older
machine types.
As a result, when hv_synic and a modern machine type are specified, QEMU
will refuse to run unless vp_index is on and the kernel is recent
enough. OTOH with an older machine type QEMU will run fine with
hv_synic=on against an older kernel and/or without vp_index enabled but
will disallow the in-QEMU uses of SynIC (in e.g. VMBus).
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-4-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make Hyper-V SynIC a device which is attached as a child to a CPU. For
now it only makes SynIC visibile in the qom hierarchy, and maintains its
internal fields in sync with the respecitve msrs of the parent cpu (the
fields will be used in followup patches).
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-3-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Put a bit more consistency into handling KVM_CAP_HYPERV_SYNIC capability,
by checking its availability and determining the feasibility of hv-synic
property first, and enabling it later.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-2-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will allow to build slightly leaner QEMU that supports some HyperV
features of KVM (e.g. SynIC timers, PV spinlocks, APIC assists, etc.)
but nothing else on the QEMU side.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082041.29380-6-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A significant part of hyperv.c is not actually tied to x86, and can
be moved to hw/.
This will allow to maintain most of Hyper-V and VMBus
target-independent, and to avoid conflicts with inclusion of
arch-specific headers down the road in VMBus implementation.
Also this stuff can now be opt-out with CONFIG_HYPERV.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082041.29380-4-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Also make the inverse function, hyperv_find_vcpu, static as it's not
used outside hyperv.c
This paves the way to making hyperv.c built optionally.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082041.29380-3-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some parts of the Hyper-V hypervisor-guest interface appear to be
target-independent, so move them into a proper header.
Not that Hyper-V ARM64 emulation is around the corner but it seems more
conveninent to have most of Hyper-V and VMBus target-independent, and
allows to avoid conflicts with inclusion of arch-specific headers down
the road in VMBus implementation.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082041.29380-2-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's nothing kvm-specific in it so follow the suite and replace
"kvm_hv" prefix with "hyperv".
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921081836.29230-9-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Multiple entities (e.g. VMBus devices) can use the same SINT route. To
make their lives easier in maintaining SINT route ownership, make it
reference-counted. Adjust the respective API names accordingly.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921081836.29230-8-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use X86CPU pointer to refer to the respective HvSintRoute instead of
vp_index. This is more convenient and also paves the way for future
enhancements.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921081836.29230-7-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make sint ack callback accept an opaque pointer, that is stored on
sint_route at creation time.
This allows for more convenient interaction with the callback.
Besides, nothing outside hyperv.c should need to know the layout of
HvSintRoute fields any more so its declaration can be removed from the
header.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921081836.29230-6-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no point setting up an sint ack notifier if no callback is
specified.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921081836.29230-5-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921081836.29230-4-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
accel_init_machine sets *(acc->allowed) to true if acc->init_machine(ms)
succeeds. There's no need to have both hvf_allowed and hvf_disabled.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20181018143051.48508-1-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to Intel(R)64 and IA-32 Architectures Software Developer's
Manual, the following one-byte registers should be fetched when REX
prefix is present (sorted by reg encoding index):
AL, CL, DL, BL, SPL, BPL, SIL, DIL, R8L - R15L
The first 8 are fetched if REX.R is zero, the last 8 if non-zero.
The following registers should be fetched for instructions without REX
prefix (also sorted by reg encoding index):
AL, CL, DL, BL, AH, CH, DH, BH
Current emulation code doesn't handle accesses to SPL, BPL, SIL, DIL
when REX is present, thefore an instruction 40883e "mov %dil,(%rsi)" is
decoded as "mov %bh,(%rsi)".
That caused an infinite loop in vp_reset:
https://lists.gnu.org/archive/html/qemu-devel/2018-10/msg03293.html
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20181018134401.44471-1-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V PV IPI support is merged to KVM, enable the feature in Qemu. When
enabled, this allows Windows guests to send IPIs to other vCPUs with a
single hypercall even when there are >64 vCPUs in the request.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20181009130853.6412-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The exception.pad field is going to be renamed to pending in an upcoming
header file update. Remove the unnecessary initialization; it was
introduced to please valgrind (commit 7e680753cf) but they were later
rendered unnecessary by commit 076796f8fd, which added the "= {}"
initializer to the declaration of "events". Therefore the patch does
not change behavior in any way.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch fixes the checking of boundary crossing instructions.
In icount mode only first instruction of the block may cross
the page boundary to keep the translation deterministic.
These conditions already existed, but compared the wrong variable.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20180920071702.22477.43980.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While at it, also rename var to indicate it is not used only in KVM.
Reviewed-by: Nikita Leshchenko <nikita.leshchenko@oracle.com>
Reviewed-by: Patrick Colp <patrick.colp@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20180914003827.124570-2-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This flag will be used for KVM's nested VMX migration; the HF_GUEST_MASK name
is already used in KVM, adopt it in QEMU as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Interrupt handling depends on various flags in env->hflags or env->hflags2,
and the exact detail were not exactly replicated between x86_cpu_has_work
and x86_cpu_exec_interrupt. Create a new function that extracts the
highest-priority non-masked interrupt, and use it in both functions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
And convert it to a bool to use an existing hole
in the struct.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
