Use force_sig_fault to implement unknown opcode. This just uninlines
that function, so simplify things by using it. Fold in EXCP_NOCP and
EXCP_INVSTATE, as is done in linux-user. Make a note about slight
differences with FreeBSD in case any of them turn out to be important
later.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The code has moved in FreeBSD since the emulator was started, update the
comment to reflect that change.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement EXCP_DEBUG and EXCP_BKPT the same, as is done in
linux-user. The prior adjustment of register 15 isn't needed, so remove
that. Remove a redunant comment (that code in FreeBSD never handled
break points). It's unclear why BKPT was an alias for system calls,
but FreeBSD doesn't do that today.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
First attempt at implementing cpu_loop_exit_sigbus, mostly copied from
linux-user version of this function.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
First attempt at implementing cpu_loop_exit_sigsegv, mostly copied from
linux-user version of this function.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Start to implement the force_sig_fault code. This currently just calls
queue_signal(). The bsd-user fork version of that will handle this the
synchronous nature of this call. Add signal-common.h to hold signal
helper functions like force_sig_fault.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move the EXCP_ATOMIC case to match linux-user/arm/cpu_loop.c:cpu_loop
ordering.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This is currently unused, so no code adjustments are needed.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
bsd-user was copied from linux-user at a time when it queued
signals. Remove those vestiges of thse code. Retain the init function,
even though it's now empty since other stuff will likely be added
there. Make it static since it's not called from outside of main.c
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
FreeBSD's get_mcontext doesn't return any vfp data. Instead, it zeros
out the vfp feilds (and all the spare fields). Impelement this
behavior. We're still missing the sysarch(ARM_GET_VFPCONTEXT) syscall,
though.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fix the broken context setting for arm. FreeBSD's get_mcontext does not
fill in the vfp info. It's filled in in sigframe(). This corresponds to
the new setup_sigframe_arch which fills in mcontext, then adjusts it to
point to the vfp context in the sigframe and fills in that context as
well. Add pointer to where this code is done.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Define setup_sigframe_arch whose job it is to setup the mcontext for the
sigframe. Implement for x86 to just call mcontext.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fill in the missing FreeBSD siginfo fields, and add some comments.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
* "meson test" switch for iotests
* deprecation of old SGX QAPI
* unexport InterruptStatsProviderClass-related functions
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHzwdAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOlMwgApVO6T934TwuTOFBs02Tp8KcjcKQq
5Qf5PrwbsluE8YixJERAFgfxgzbQKL/iHzkP97KoVo3CFFDc1sss7v3mrbbHxbwB
jiYIgbNjRfBbZq7nNmxf2bcXxTpZYvMNEia0QPyNl1GQ0JS/RFOsEYcyVUPvVmAI
djeESRyku1OS5bS5veqE2tL+AWDuodjHeW78qi+yIDRPx3jHLRzuGpQ/3KtgMN6o
d61h5vVrqdxe1HYH/8sh+qU71w7drpNZVYq8PqkZyit/LXgDMyDDOks1XWarrrJE
9xzNBUNR+B6CuHtNw1DGk4rvsCBV/F0ZVki6guVGoqG8njF3l6xyqRHPbw==
=2/gW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* configure and meson fixes
* "meson test" switch for iotests
* deprecation of old SGX QAPI
* unexport InterruptStatsProviderClass-related functions
# gpg: Signature made Fri 28 Jan 2022 10:13:36 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream:
configure: fix parameter expansion of --cross-cc-cflags options
qapi: Cleanup SGX related comments and restore @section-size
check-block: replace -makecheck with TAP output
qemu-iotests: require at least an argument to check-block.sh
build: make check-block a meson test
scripts/mtest2make: add support for SPEED=thorough
check-block.sh: passthrough -jN flag of make to -j N flag of check
meson: Use find_program() to resolve the entitlement.sh script
exec/cpu: Make host pages variables / macros 'target agnostic'
meson.build: Use a function from libfdt 1.5.1 for the library check
intc: Unexport InterruptStatsProviderClass-related functions
docker: add msitools to Fedora/mingw cross
build-sys: fix undefined ARCH error
build-sys: fix a meson deprecation warning
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Without this fix, any use of --cross-cc-cflags-* causes a message like:
$ ../configure --cross-cc-ppc64le=clang --cross-cc-cflags-ppc64le="-target powerpc64le-unknown-linux-gnu -sysroot ..."
../configure: 1: eval: cross_cc_cflags_--cross-cc-cflags-ppc64le=-target: not found
../configure: 3816: export: cross_cc_cflags_--cross-cc-cflags-ppc64le: bad variable name
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220120173142.2755077-1-matheus.ferst@eldorado.org.br>
[Fix other occurrences too, noted by Philippe Mathieu-Daudé. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The SGX NUMA patches were merged into Qemu 7.0 release, we need
clarify detailed version history information and also change
some related comments, which make SGX related comments clearer.
The QMP command schema promises backwards compatibility as standard.
We temporarily restore "@section-size", which can avoid incompatible
API breakage. The "@section-size" will be deprecated in 7.2 version.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220120223104.437161-1-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let "meson test" take care of showing the results of the individual tests,
consistently with other output from "make check V=1".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is anyway how check-block.sh is used in practice, and by removing the
list of formats in the script we avoid duplication between meson.build
and check-block.sh.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"meson test" can be asked to run tests verbosely; this makes it usable
also for qemu-iotests's own harness, and it lets "make check-block"
reuse mtest2make.py's infrastructure to find and build test dependencies.
Adjust check-block.sh to use the standard exit code that reports a test
as skipped. Alternatively, in the future we could make it produce TAP
output, which is consistent with all other "make check" tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This improves performance of running iotests during "make -jN check".
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211223183933.1497037-1-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using ../configure without any particular option generates 31 targets
on Darwin, and meson search for the entitlement.sh script 31 times:
Program nm found: YES
Program scripts/undefsym.py found: YES (/opt/homebrew/opt/python@3.9/bin/python3.9 /Code/qemu/scripts/undefsym.py)
Program scripts/feature_to_c.sh found: YES (/bin/sh /Code/qemu/scripts/feature_to_c.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Program scripts/entitlement.sh found: YES (/Code/qemu/scripts/entitlement.sh)
Configuring 50-edk2-i386-secure.json using configuration
Configuring 50-edk2-x86_64-secure.json using configuration
Use find_program() which seems to cache the script path once found.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220122002052.83745-1-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In some cases, a particular mapcache entry may be mapped 256 times
causing the lock field to wrap to 0. For example, this may happen when
using emulated NVME and the guest submits a large scatter-gather write.
At this point, the entry map be remapped causing QEMU to write the wrong
data or crash (since remap is not atomic).
Avoid this overflow by increasing the lock field to a uint32_t and also
detect it and abort rather than continuing regardless.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-Id: <20220124104450.152481-1-ross.lagerwall@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
commit f37f29d314 "xen: slightly simplify bufioreq handling" hard
coded setting req.count = 1 during initial field setup before the main
loop. This missed a subtlety that an early exit from the loop when
there are no ioreqs to process, would have req.count == 0 for the return
value. handle_buffered_io() would then remove state->buffered_io_timer.
Instead handle_buffered_iopage() is basically always returning true and
handle_buffered_io() always re-setting the timer.
Restore the disabling of the timer by introducing a new handled_ioreq
boolean and use as the return value. The named variable will more
clearly show the intent of the code.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20211210193434.75566-1-jandryuk@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
We don't generate trace events for tests/ and qga/ because that it is
not simple and not necessary. We have corresponding comments in both
tests/meson.build and qga/meson.build.
Still to not miss possible future qapi code generation call, and not to
forget to enable trace events generation, let's enable it by default.
So, turn option --gen-trace into opposite --no-trace-events and use new
option only in tests/ and qga/ where we already have good comments why
we don't generate trace events code.
Note that this commit enables trace-events generation for qapi-gen.py
call from tests/qapi-schema/meson.build and storage-daemon/meson.build.
Still, both are kind of noop: tests/qapi-schema/ doesn't seem to
generate any QMP command code and no .trace-events files anyway,
storage-daemon/ uses common QMP command implementations and just
generate empty .trace-events
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220126161130.3240892-8-vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Making trace generation work for tests/ and qga/ would involve some
Meson hackery to ensure we generate the trace-events files before
trace-tool uses them. Since we don't actually support tracing there
anyway, we bypass that problem.
Let's add corresponding comments.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220126161130.3240892-7-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Pasto fixed, commit message punctuation tidied up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Previous commits enabled trace events generation for most of QAPI
generated code (except for tests/ and qga/). Let's update documentation
to illustrate it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220126161130.3240892-6-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
"host" pages are related to the *host* not the *target*,
thus the qemu_host_page_size / qemu_host_page_mask variables
and the HOST_PAGE_ALIGN() / REAL_HOST_PAGE_ALIGN() macros
can be moved to "exec/cpu-common.h" which is target agnostic.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220120000836.229419-1-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fdt version test in meson.build uses a function from libfdt v1.4.7,
but we require version 1.5.1 nowadays. Thus use a function that has
been introduced in that version instead.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/822
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220118170548.97288-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The functions are only used within their respective source files, so no
need for exporting.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20220116122327.73048-1-shentey@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
That should help catch build issues/regressions with wixl.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220114084312.3725242-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
../qga/meson.build:76:4: ERROR: Key ARCH is not in the dictionary.
Fixes commit 823eb013 ("configure, meson: move ARCH to meson.build")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220114084312.3725242-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
1. Use --gen-trace when generate qmp commands
2. Add corresponding .trace-events files as outputs in qapi_files
custom target
3. Define global qapi_trace_events list of .trace-events file targets,
to fill in trace/qapi.build and to use in trace/meson.build
4. In trace/meson.build use the new array as an additional source of
.trace_events files to be processed
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220126161130.3240892-5-vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add trace generation disabled by default and new option --gen-trace to
enable it. The next commit will enable it for qapi/, but not for qga/
and tests/. Making it work for the latter two would involve some Meson
hackery to ensure we generate the trace-events files before trace-tool
uses them. Since we don't actually support tracing there, we'll bypass
that problem.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220126161130.3240892-4-vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Superfluous #include dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Move error_propagate() to if (err) and make "if (err)" block mandatory.
This is to simplify further commit, which will bring trace events
generation for QMP commands.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220126161130.3240892-3-vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We are going to generate trace events for QMP commands. We should
generate both trace_*() function calls and trace-events files listing
events for trace generator.
So, add an output module FOO.trace-events for each FOO schema module.
Since we're going to add trace events only to command marshallers,
make the trace-events output optional, so we don't generate so many
useless empty files.
Currently nobody set add_trace_events to True, so new functionality is
disabled. It will be enabled for QAPISchemaGenCommandVisitor
in a further commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220126161130.3240892-2-vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Similar to f7160f3218 "schemas: Add vim modeline"
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20211220145624.52801-1-victortoso@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
At the start, drop membership of all supplementary groups. This is
not required.
If we have membership of "root" supplementary group and when we switch
uid/gid using setresuid/setsgid, we still retain membership of existing
supplemntary groups. And that can allow some operations which are not
normally allowed.
For example, if root in guest creates a dir as follows.
$ mkdir -m 03777 test_dir
This sets SGID on dir as well as allows unprivileged users to write into
this dir.
And now as unprivileged user open file as follows.
$ su test
$ fd = open("test_dir/priviledge_id", O_RDWR|O_CREAT|O_EXCL, 02755);
This will create SGID set executable in test_dir/.
And that's a problem because now an unpriviliged user can execute it,
get egid=0 and get access to resources owned by "root" group. This is
privilege escalation.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2044863
Fixes: CVE-2022-0358
Reported-by: JIETAO XIAO <shawtao1125@gmail.com>
Suggested-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Message-Id: <YfBGoriS38eBQrAb@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Fixed missing {}'s style nit
A few fixes to the Python CI tests, a few fixes to the (async) QMP
library, and a set of patches that begin to shift us towards using the
new qmp lib.
-----BEGIN PGP SIGNATURE-----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=D2kj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jsnow-gitlab/tags/python-pull-request' into staging
Python patches
A few fixes to the Python CI tests, a few fixes to the (async) QMP
library, and a set of patches that begin to shift us towards using the
new qmp lib.
# gpg: Signature made Sat 22 Jan 2022 00:07:58 GMT
# gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E
* remotes/jsnow-gitlab/tags/python-pull-request:
scripts/render-block-graph: switch to AQMP
scripts/cpu-x86-uarch-abi: switch to AQMP
scripts/cpu-x86-uarch-abi: fix CLI parsing
python: move qmp-shell under the AQMP package
python: move qmp utilities to python/qemu/utils
python/qmp: switch qmp-shell to AQMP
python/qmp: switch qom tools to AQMP
python/qmp: switch qemu-ga-client to AQMP
python/qemu-ga-client: don't use deprecated CLI syntax in usage comment
python/aqmp: rename AQMPError to QMPError
python/aqmp: add SocketAddrT to package root
python/aqmp: copy type definitions from qmp
python/aqmp: handle asyncio.TimeoutError on execute()
python/aqmp: add __del__ method to legacy interface
python/aqmp: fix docstring typo
python: use avocado's "new" runner
python: pin setuptools below v60.0.0
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Creating an instance of qemu.aqmp.ExecuteError is too involved here, so
just drop the specificity down to a generic QMPError.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
In order to upload a QMP package to PyPI, I want to remove any scripts
that I am not 100% confident I want to support upstream, beyond our
castle walls.
Move most of our QMP utilities into the utils package so we can split
them out from the PyPI upload.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
We have a replacement for async QMP, but it doesn't have feature parity
yet. For now, then, port the old tool onto the new backend.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
