We don't currently document the syntax of .hx files anywhere
except in a few comments at the top of individual .hx files.
We don't even have somewhere in the developer docs where we
could do this.
Add a new files docs/devel/docs.rst which can be a place to
document how our docs build process works. For the moment,
put in only a brief introductory paragraph and the documentation
of the .hx files. We could later add to this file by for
example describing how the QAPI-schema-to-docs process works,
or anything else that developers might need to know about
how to add documentation.
Make the .hx files refer to this doc file, and clean
up their header comments to be more accurate for the
usage in each file and less cut-n-pasted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-id: 20231212162313.1742462-1-peter.maydell@linaro.org
This commit adds a new B-L475E-IOT01A board using the STM32L475VG SoC
as well as a dedicated documentation file.
The implementation is derived from the Netduino Plus 2 machine.
There are no peripherals implemented yet, only memory regions.
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240108135849.351719-3-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds a new STM32L4x5 SoC, it is necessary to add support for
the B-L475E-IOT01A board.
The implementation is derived from the STM32F405 SoC.
The implementation contains no peripherals, only memory regions are
implemented.
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240108135849.351719-2-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I am currently focusing in kernel development, so I will probably not be
of much help in reviewing general Live Migration changes.
For above reason I am removing my Reviewer status from Migration and RDMA
Migration.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Link: https://lore.kernel.org/r/20231221170739.332378-1-leobras@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
I am leaving Red Hat, and as part of that I am leaving Migration
maintenarship.
You are left in good hands with Peter and Fabiano.
Thanks for all the fish.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Link: https://lore.kernel.org/r/20240102201908.1987-2-quintela@redhat.com
[peterx: prefix the subject]
Signed-off-by: Peter Xu <peterx@redhat.com>
* Some header clean-ups by Philippe
* Restrict type names to alphanumerical range (and a few special characters)
* Fix analyze-migration.py script on s390x
* Clean up and improve some tests
* Document handling of commas in CLI options parameters
-----BEGIN PGP SIGNATURE-----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=TA1/
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-12-20' of https://gitlab.com/thuth/qemu into staging
* Add compat machines for QEMU 9.0
* Some header clean-ups by Philippe
* Restrict type names to alphanumerical range (and a few special characters)
* Fix analyze-migration.py script on s390x
* Clean up and improve some tests
* Document handling of commas in CLI options parameters
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmWCtYsRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWLnw//cNJrxG0V+j0iakX+C7HRumVrLBDI4KYY
# Cp2Hx92SyeQ0Kk8DJS6JueTV0SLjMsV77APu2YPH7ELmPlk+CB9gqmV7xVoYNvsm
# QbRPlIjFw8MHLekadc2A+C+pn48tWACoOdBEDIfazKrxybnf0B57RC/fIfMKHjbs
# 2ALCoFbbgphs7yWuzTHK8ayKaGMhUVkWfzHQwpnq899olHyZBhkl951uKJA6VmLx
# KvggePkpszLjmmXA8MH1hDCcizki31cB0ZKTbQFCyE42s2S3Hvg0GueU90O7Y1cj
# lS5tPVQxyEhUYMLL+/hudlf2OYqVn2BalB7ieUQIy6rG8yoc9zxfIKQi0ccl+2oA
# s8HRq5S0bSjtilQogU1LQL/Gk6W1/N9MmnhKvCGB+BTK5KX7s4EQk02y9gGZm/8s
# pMErMyaXTG4dLiTAK42VgMVDqCYvzBmE+Gj91OmoUR7fb+VMrsWxeBFxMPDn+VtL
# TMJegIFsjw2QCSitcU4v+nP0qtKgXGbuZtrGXKabrxH5PmeQFJDSM7TwpTK4qvjK
# QMIQKBbz8BfJnUzN8qAaaJEpp1T5tcMJClKtfcgxq/+VyaSaHLmD0cljqBC+g+y7
# FTo+fa7oYx44sAlqapdEXBSGn4T+J26iuCef13CCCiPfYBv/tk3b2E0AWHj4y58I
# +VpInjUaPBQ=
# =TA1/
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Dec 2023 04:36:11 EST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-12-20' of https://gitlab.com/thuth/qemu:
tests/unit/test-qmp-event: Replace fixture by global variables
tests/unit/test-qmp-event: Simplify event emission check
tests/unit/test-qmp-event: Drop superfluous mutex
tests/qtest/npcm7xx_pwm-test: Only do full testing in slow mode
qemu-options: Clarify handling of commas in options parameters
tests/qtest/migration-test: Fix analyze-migration.py for s390x
qom/object: Limit type names to alphanumerical and some few special characters
tests/unit/test-io-task: Rename "qemu:dummy" to avoid colon in the name
memory: Remove "qemu:" prefix from the "qemu:ram-discard-manager" type name
hw: Replace anti-social QOM type names (again)
docs/system/arm: Fix for rename of type "xlnx.bbram-ctrl"
target: Restrict 'sysemu/reset.h' to system emulation
hw/s390x/ipl: Remove unused 'exec/exec-all.h' included header
hw/misc/mips_itu: Remove unnecessary 'exec/exec-all.h' header
hw/ppc/spapr_hcall: Remove unused 'exec/exec-all.h' included header
system/qtest: Restrict QTest API to system emulation
system/qtest: Include missing 'hw/core/cpu.h' header
MAINTAINERS: Add some more vmware-related files to the corresponding section
hw: Add compat machines for 9.0
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These files are obviously related to Vmware emulation, so let's list
them in the corresponding section in the MAINTAINERS file.
Message-ID: <20231107102738.14797-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
/dev/vfio/devices/vfioX may not exist. In that case it is still possible
to open /dev/char/$major:$minor instead. Add helper function to abstract
the cdev open.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Introduce an iommufd object which allows the interaction
with the host /dev/iommu device.
The /dev/iommu can have been already pre-opened outside of qemu,
in which case the fd can be passed directly along with the
iommufd object:
This allows the iommufd object to be shared accross several
subsystems (VFIO, VDPA, ...). For example, libvirt would open
the /dev/iommu once.
If no fd is passed along with the iommufd object, the /dev/iommu
is opened by the qemu code.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The tests/decode/ folder belongs to scripts/decodetree.py, so
it should be listed in the same section as the script.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* Two small s390x PCI fixes
* Update MAINTAINERS file with more entries
* Fix NetBSD VM test
* Clean up some bad wordings
-----BEGIN PGP SIGNATURE-----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=+2rp
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-11-13' of https://gitlab.com/thuth/qemu into staging
* Fix compilation with Clang 17 on s390x hosts
* Two small s390x PCI fixes
* Update MAINTAINERS file with more entries
* Fix NetBSD VM test
* Clean up some bad wordings
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmVSAoIRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbVXBg//VVZS5CXEfOFV91I1kqQnLCvgwmuAyqEg
# PI2/HBxuhzeBx+F1t7uR0n15tUPi1zkFFBOpyBDBubvWcp4vGvFwLQoiBCUvNzBA
# +b1vMySP+K0OO1X5yT3cFHXF9q0o0V5WADwemf5RglIPjlTOIiz9qhD4EYqd2QHC
# EUd9Y45DP4Y0V5raHLjY990f/zr3PuSAB6MASFTUnKdgGkRqonLWdLDdIZNDrZuL
# oGwx1ALXgBOMV3yNyQx9jZBT24git/ai1vd9AU/d3JRKDPsd+4vC39+PTI9NH4h6
# oQglvo399f64cir1f1JJ3MN4ZtwXZpwUkjeTMcR9XZxk7GibU7P2arG5M3TERdmE
# VLqylYsnbJojWOeCH+TViJapRhg1CzUveVlQofr7GHvf2N3oy3BrKaV715gauEyW
# zpjbhSPpIQu9WFXt8+tSquqbvpAP/VlLrOV73D4LzJ7WdTa9CHmSek8D0zoRQDZR
# 8OixrgoBKS+pmBDmTve5gFsIKhZIz9CrmaAKKYdskC8blENxCng8LOFp7sg2PK3M
# U0lWYoDS7qZ85761Bl+QaBdFocdahQqkO/LUQuhoSt2OvA1EGAz2FdVSKkmPDdSS
# P/homr4hOXIqJFSsZj0YNUTIXsXwLBvKjvcJPAWYgbXZhim0LtPQTQO3+ignwGyu
# RXjaVkvkf/s=
# =+2rp
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 13 Nov 2023 06:03:30 EST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-11-13' of https://gitlab.com/thuth/qemu:
hw/audio/es1370: Clean up comment
tests/tsan: Rename the file with the entries that should be ignored
test-resv-mem: Fix CID 1523911
tests/vm/netbsd: Use Python v3.11
MAINTAINERS: Add a general architecture section for x86
MAINTAINERS: Extend the Stellaris section
MAINTAINERS: Add hw/display/sii9022.c to the Versatile Express section
MAINTAINERS: Add hw/input/ads7846.c to the PXA2XX section
MAINTAINERS: Add include/hw/input/pl050.h to the PrimeCell/CMSDK section
s390x/pci: only limit DMA aperture if vfio DMA limit reported
s390x/pci: bypass vfio DMA counting when using cdev
host/include/generic/host/atomic128: Fix compilation problem with Clang 17
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The old virtio-fs mailing list address is no longer in use. Switch to
the new mailing list address.
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: German Maglione <gmaglione@redhat.com>
Cc: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231111004920.148348-1-stefanha@redhat.com>
It's a little bit weird that the files in target/i386/ which
are not in a subfolder there do not have any associated
maintainer (and thus nobody might be CC:-ed on changes to
these files). We should have a general x86 section for these
files, similar to what we already have for s390x and mips.
Since Paolo is already listed as maintainer for both, the
x86 KVM and TCG CPUs, I'd like to suggest him as maintainer
for the general files, too.
Message-ID: <20230929134551.395438-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This header include/hw/timer/stellaris-gptm.h obviously belongs to the
Stellaris machines, so let's add it to the corresponding section.
And hw/display/ssd0303.c and hw/display/ssd0323.c are only used
by hw/arm/stellaris.c, so add them to the corresponding section
in the MAINTAINERS file, too.
Message-ID: <20231020060936.524988-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This graphics adapter is only used by the Versatile Express machine,
so add it to the corresponding section in MAINTAINERS.
Message-ID: <20231020060936.524988-4-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The code from hw/input/ads7846.c is only used by hw/arm/spitz.c,
so add this file to the same section where hw/arm/spitz.c is
listed.
Message-ID: <20231020060936.524988-3-thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The corresponding pl050.c file is already listed here, so we should
mention the header here, too.
Message-ID: <20231020060936.524988-2-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We already do a couple of "info registers" for specific tests but this
is a more comprehensive multiarch test. It also has some output
helpful for debugging the gdbstub by showing which XML features are
advertised and what the underlying register numbers are.
My initial motivation was to see if there are any duplicate register
names exposed via the gdbstub while I was reviewing the proposed
register interface for TCG plugins.
Mismatches between the xml and remote-desc are reported for debugging
but do not fail the test.
We also skip the tests for the following arches for now until we can
investigate and fix any issues:
- s390x (fails to read v0l->v15l, not seen in remote-registers)
- ppc64 (fails to read vs0h->vs31h, not seen in remote-registers)
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Cc: Luis Machado <luis.machado@linaro.org>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: qemu-s390x@nongnu.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Daniel Henrique Barboza <danielhb413@gmail.com>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231106185112.2755262-7-alex.bennee@linaro.org>
This queue, the last one before the 8.2 feature freeze, has miscellanous
changes that includes new PowerNV features and the new AmigaONE XE
board.
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZUqiORYcZGFuaWVsaGI0
MTNAZ21haWwuY29tAAoJEDzZypbeAzFkBSUA/2qm8CyrRqY5+tsjtWQqZmPZ3L1F
CgnXFNqtY2tzbTe5AQCi6FeQBEmXbZYVfryZyA+CQ4DUERc+18pe6hV3bBR9Cg==
=cnHS
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20231107' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2023-11-07:
This queue, the last one before the 8.2 feature freeze, has miscellanous
changes that includes new PowerNV features and the new AmigaONE XE
board.
# -----BEGIN PGP SIGNATURE-----
#
# iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZUqiORYcZGFuaWVsaGI0
# MTNAZ21haWwuY29tAAoJEDzZypbeAzFkBSUA/2qm8CyrRqY5+tsjtWQqZmPZ3L1F
# CgnXFNqtY2tzbTe5AQCi6FeQBEmXbZYVfryZyA+CQ4DUERc+18pe6hV3bBR9Cg==
# =cnHS
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 08 Nov 2023 04:46:49 HKT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: issuer "danielhb413@gmail.com"
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20231107' of https://gitlab.com/danielhb/qemu:
ppc: qtest already exports qtest_rtas_call()
hw/pci-host: Update PHB5 XSCOM registers
ppc/pnv: Fix number of I2C engines and ports for power9/10
ppc/pnv: Connect PNV I2C controller to powernv10
ppc/pnv: Connect I2C controller model to powernv9 chip
ppc/pnv: Add an I2C controller model
tests/avocado: Add test for amigaone board
hw/ppc: Add emulation of AmigaOne XE board
hw/pci-host: Add emulation of Mai Logic Articia S
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Fix condition code problem in the CLC and LAALG instruction
* Fix ordering of the new s390x topology list entries
* Add some more files to the MAINTAINERS file
* Allow newer versions of Tesseract in the m68k nextcube test
-----BEGIN PGP SIGNATURE-----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=y+cC
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-11-07' of https://gitlab.com/thuth/qemu into staging
* Fix s390x CPU reconfiguration information in the SCLP facility map
* Fix condition code problem in the CLC and LAALG instruction
* Fix ordering of the new s390x topology list entries
* Add some more files to the MAINTAINERS file
* Allow newer versions of Tesseract in the m68k nextcube test
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmVKgksRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWIHg//TM3JOpsMEqHKlUKqOJH02mFQrK6H7LG0
# BC56FG7T+/mpYs1NTG92t8nCK03C2ZCweQWD7ZulRJAjPhZv+TF5bJEForivU7+k
# PKEshz9xKCWn2YGyNnf2LA06J1JkF215+KlReOoxwSgj1cPlHfBLQ0DtxmpJJZ1G
# h5p4d26BbSlwR58HrFWTlhgJMPenl59BETUGIK1FklBxunmZeeijddfniAhOT44y
# i0u9/H9KCg3tkwBROUy+42QV+ef32kz/yvi5RmYQI5W7PixO4sxH6MYduOjshsu9
# wK70f8EOwiZV6lFxqmbV7vxFeNnp5IuaVU7PMBoAkwZqLw99mSFy1+1BabCuL5b+
# 3iUTiD4UW48MYwE2Ua6Lit4kpfjhwcp/UYz6pIk6TCBQX6LfzO+nj+rod0GdIpyZ
# 4Lwm7jBtpTlYkGrsMvpA/qcidOtqPA1lmBTNlY1hFodQF6KWtyObn0w5AM80xeeU
# /mGxQDz97Bpz7LKZvhu+k38jaWvnJFnl3jF1zet88CYL9YL+YI/k1KjhFafCXb0V
# 38Xpt5JTWxyLSh2B3gx0OpokX5bftvW9GlLix0HqL7c23uYwR2Bq+Rd6I8SAlk4C
# uJq6gqP8IFBFHfgbmyqf/fyd/eHxm7J1voIdy9PZyxZ1JYT9A7yu56qV6SJYwCpr
# aARwui/Dm4o=
# =y+cC
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 08 Nov 2023 02:30:35 HKT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-11-07' of https://gitlab.com/thuth/qemu:
target/s390x/cpu topology: Fix ordering and creation of TLEs
tests/tcg/s390x: Test ADD LOGICAL WITH CARRY
tests/tcg/s390x: Test LAALG with negative cc_src
target/s390x: Fix LAALG not updating cc_src
tests/tcg/s390x: Test CLC with inaccessible second operand
target/s390x: Fix CLC corrupting cc_src
target/s390x/cpu_models: Use 'first_cpu' in s390_get_feat_block()
s390/sclp: fix SCLP facility map
tests/avocado: Allow newer versions of tesseract in the nextcube test
MAINTAINERS: Add artist.c to the hppa machine section
MAINTAINERS: Add the virtio-gpu documentation to the corresponding section
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The AmigaOne is a rebranded MAI Teron board that uses U-Boot firmware
with patches to support AmigaOS and is very similar to pegasos2 so can
be easily emulated sharing most code with pegasos2. The reason to
emulate it is that AmigaOS comes in different versions for AmigaOne
and PegasosII which only have drivers for one machine and firmware so
these only run on the specific machine. Adding this board allows
another AmigaOS version to be used reusing already existing peagasos2
emulation. (The AmigaOne was the first of these boards so likely most
widespread which then inspired Pegasos that was later replaced with
PegasosII due to problems with Articia S, so these have a lot of
similarity. Pegasos mainly ran MorphOS while the PegasosII version of
AmigaOS was added later and therefore less common than the AmigaOne
version.)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <804935e7a5921548d630576159ae2c758fe6e275.1699382232.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The artist graphics adapter is only used by the hppa machine, so
let's add this file to the corresponding section.
Message-ID: <20231107103044.15089-1-thuth@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
contrib/systemd/qemu-guest-agent.service, tests/data/test-qga-config
and tests/data/test-qga-os-release belong to the guest agent, so make
sure that these files are covered here, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-ID: <20231107101811.14189-1-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These machines are the only user of the mx_pic code, so the
header (which is currently "unmaintained" according to the
MAINTAINERS file) should be added to this section.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231107102104.14342-1-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Effective immediately, the libvirt project has moved its list off
libvir-list@redhat.com, to devel@lists.libvirt.org
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20231027095643.2842382-1-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add can.rst to the corresponding section in MAINTAINERS, so that
the maintainers get CC:-ed on corresponding patches.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Vikram Garhwal <vikram.garhwal@amd.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-ID: <20231027060931.242491-1-thuth@redhat.com>
[PMD: Fixed typo in subject]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
tmu012.h is the header that belongs to hw/timer/sh_timer.c, so we
should list it in the same section as sh_timer.c.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-ID: <20231026080011.156325-1-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The ADM1266 can have string fields written by the driver, so
it's worth specifically testing.
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Titus Rwantare <titusr@google.com>
[PMD: Cover file in MAINTAINERS]
Message-ID: <20231023-staging-pmbus-v3-v4-6-07a8cb7cd20a@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The ADM1266 is a cascadable super sequencer with margin control and
fault recording.
This commit adds basic support for its PMBus commands and models
the identification registers that can be modified in a firmware
update.
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Titus Rwantare <titusr@google.com>
[PMD: Cover file in MAINTAINERS]
Message-ID: <20231023-staging-pmbus-v3-v4-5-07a8cb7cd20a@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The tests in this file actually test the APIC ID combinations.
Rename to test-x86-topo.c to make its name more in line with its
actual content.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231024090323.1859210-3-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
virtio sound card support
vhost-user: back-end state migration
cxl:
line length reduction
enabling fabric management
vhost-vdpa:
shadow virtqueue hash calculation Support
shadow virtqueue RSS Support
tests:
CPU topology related smbios test cases
Fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmVKDDoPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpF08H/0Zts8uvkHbgiOEJw4JMHU6/VaCipfIYsp01
GSfwYOyEsXJ7GIxKWaCiMnWXEm7tebNCPKf3DoUtcAojQj3vuF9XbWBKw/bfRn83
nGO/iiwbYViSKxkwqUI+Up5YiN9o0M8gBFrY0kScPezbnYmo5u2bcADdEEq6gH68
D0Ea8i+WmszL891ypvgCDBL2ObDk3qX3vA5Q6J2I+HKX2ofJM59BwaKwS5ghw+IG
BmbKXUZJNjUQfN9dQ7vJuiuqdknJ2xUzwW2Vn612ffarbOZB1DZ6ruWlrHty5TjX
0w4IXEJPBgZYbX9oc6zvTQnbLDBJbDU89mnme0TcmNMKWmQKTtc=
=vEv+
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes
virtio sound card support
vhost-user: back-end state migration
cxl:
line length reduction
enabling fabric management
vhost-vdpa:
shadow virtqueue hash calculation Support
shadow virtqueue RSS Support
tests:
CPU topology related smbios test cases
Fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmVKDDoPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpF08H/0Zts8uvkHbgiOEJw4JMHU6/VaCipfIYsp01
# GSfwYOyEsXJ7GIxKWaCiMnWXEm7tebNCPKf3DoUtcAojQj3vuF9XbWBKw/bfRn83
# nGO/iiwbYViSKxkwqUI+Up5YiN9o0M8gBFrY0kScPezbnYmo5u2bcADdEEq6gH68
# D0Ea8i+WmszL891ypvgCDBL2ObDk3qX3vA5Q6J2I+HKX2ofJM59BwaKwS5ghw+IG
# BmbKXUZJNjUQfN9dQ7vJuiuqdknJ2xUzwW2Vn612ffarbOZB1DZ6ruWlrHty5TjX
# 0w4IXEJPBgZYbX9oc6zvTQnbLDBJbDU89mnme0TcmNMKWmQKTtc=
# =vEv+
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Nov 2023 18:06:50 HKT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (63 commits)
acpi/tests/avocado/bits: enable console logging from bits VM
acpi/tests/avocado/bits: enforce 32-bit SMBIOS entry point
hw/cxl: Add tunneled command support to mailbox for switch cci.
hw/cxl: Add dummy security state get
hw/cxl/type3: Cleanup multiple CXL_TYPE3() calls in read/write functions
hw/cxl/mbox: Add Get Background Operation Status Command
hw/cxl: Add support for device sanitation
hw/cxl/mbox: Wire up interrupts for background completion
hw/cxl/mbox: Add support for background operations
hw/cxl: Implement Physical Ports status retrieval
hw/pci-bridge/cxl_downstream: Set default link width and link speed
hw/cxl/mbox: Add Physical Switch Identify command.
hw/cxl/mbox: Add Information and Status / Identify command
hw/cxl: Add a switch mailbox CCI function
hw/pci-bridge/cxl_upstream: Move defintion of device to header.
hw/cxl/mbox: Generalize the CCI command processing
hw/cxl/mbox: Pull the CCI definition out of the CXLDeviceState
hw/cxl/mbox: Split mailbox command payload into separate input and output
hw/cxl/mbox: Pull the payload out of struct cxl_cmd and make instances constant
hw/cxl: Fix a QEMU_BUILD_BUG_ON() in switch statement scope issue.
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add virtio-gpu.rst to the corresponding section in MAINTAINERS, so that
the maintainers gets CC:-ed on corresponding patches.
Message-ID: <20231027060808.242442-1-thuth@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add notes about console and network support, and how to launch PV guests.
Clean up the disk configuration examples now that that's simpler, and
remove the comment about IDE unplug on q35/AHCI now that it's fixed.
Update the -initrd option documentation to explain how to quote commas
in module command lines, and reference it when documenting PV guests.
Also update stale avocado test filename in MAINTAINERS.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This commit adds basic documentation for using virtio-snd.
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <e7fb941cf7636fdff40cbdcdcd660dec5f15ca3c.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds a PCI wrapper device for the virtio-sound device.
It is necessary to instantiate a virtio-snd device in a guest.
All sound logic will be added to the virtio-snd device in the following
commits.
To add this device with a guest, you'll need a >=5.13 kernel compiled
with CONFIG_SND_VIRTIO=y, which at the time of writing most distros have
off by default.
Use with following flags in the invocation:
Pulseaudio:
-audio driver=pa,model=virtio
or
-audio driver=pa,model=virtio,server=/run/user/1000/pulse/native
sdl:
-audio driver=sdl,model=virtio
coreaudio (macos/darwin):
-audio driver=coreaudio,model=virtio
etc.
Based-on: 5a2f350eec
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <b223598d59f56ead6a6d8d9bb6801e17489ddaa4.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a new VIRTIO device for the virtio sound device id. Functionality
will be added in the following commits.
Based-on: 5a2f350eec
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <f9678a41fe97b5886c1b04795f1be046509de866.1698062525.git.manos.pitsidianakis@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Rename ext_icboz to ext_zicboz
* Rename ext_icbom to ext_zicbom
* Rename ext_icsr to ext_zicsr
* Rename ext_ifencei to ext_zifencei
* Add RISC-V Virtual IRQs and IRQ filtering support
* Change default linux-user cpu to 'max'
* Update 'virt' machine core limit
* Add query-cpu-model-expansion API
* Rename epmp to smepmp and expose the extension
* Clear pmp/smepmp bits on reset
* Ignore pmp writes when RW=01
* Support zicntr/zihpm flags and disable support
* Correct CSR_MSECCFG operations
* Update mail address for Weiwei Li
* Update RISC-V vector crypto to ratified v1.0.0
* Clear the Ibex/OpenTitan SPI interrupts even if disabled
* Set the OpenTitan priv to 1.12.0
* Support discontinuous PMU counters
-----BEGIN PGP SIGNATURE-----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=2A+W
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20231107' of https://github.com/alistair23/qemu into staging
Third RISC-V PR for 8.2
* Rename ext_icboz to ext_zicboz
* Rename ext_icbom to ext_zicbom
* Rename ext_icsr to ext_zicsr
* Rename ext_ifencei to ext_zifencei
* Add RISC-V Virtual IRQs and IRQ filtering support
* Change default linux-user cpu to 'max'
* Update 'virt' machine core limit
* Add query-cpu-model-expansion API
* Rename epmp to smepmp and expose the extension
* Clear pmp/smepmp bits on reset
* Ignore pmp writes when RW=01
* Support zicntr/zihpm flags and disable support
* Correct CSR_MSECCFG operations
* Update mail address for Weiwei Li
* Update RISC-V vector crypto to ratified v1.0.0
* Clear the Ibex/OpenTitan SPI interrupts even if disabled
* Set the OpenTitan priv to 1.12.0
* Support discontinuous PMU counters
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmVJoOEACgkQr3yVEwxT
# gBPwcw/5AXgSVu521IHpobofq4Skc2rpO9P0Hep3IniBuS+5+h2XM3fwWNBaeeGj
# LZgdXDrCfcCnPuFh2I5j1D885xJDncDF4LET9EFtxK+BTT8eC5JpaCnORdV3Zd2T
# C7qdq1r4J/wKBel3cAz1jlLXc2Pssle4NFaMZGmOGlNX/mLJUYkI6BwKG9wNiCI+
# cCRQW5bEv9g8XzPYPsIKhX9aTegDKdV5x4Xj3YyVs8qkZTVM7Ona8GTpy6eShNfL
# h/RW+yvSxLwfKC9YJHesjI1oqhLsAuA7hFu5AVHiedFNAD5FevMZsZwrqjrmeBOG
# 5awBw9XgfXFFl7jQ0VQVRknt/PFANzTmGGbjLUkaXgJ6iTmH7oIMzwbkx2pM/0Qd
# HV2EboUPe5rJl0SNhcDMCJkYJYpt4z6TVXFpN5p10WU4K1AJXZf9P3YkChcxWiSK
# B4DlY4ax3W77voySwbKCvJRIRWCFQZmtl7doFY5dEQz2ERcNfI7VIB1GKIj7BlGm
# AVTCc5G9KghsaB8q0BzYbDplzCggdaaUBRgpIgLS/n22GKJlOisFwMCawWquPkEw
# i0t3ftt+Ket4Qnnq+dO4W3ehR4qW1/XatCWgQ3NCSgUeS4/9VK3h/nz5t+L7iKwp
# mjp86gNN11wcJRsBIIV7nOAmSAs9ybCm2F4J6YAyh3n1IlRVN0Q=
# =2A+W
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Nov 2023 10:28:49 HKT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20231107' of https://github.com/alistair23/qemu: (49 commits)
docs/about/deprecated: Document RISC-V "pmu-num" deprecation
target/riscv: Add "pmu-mask" property to replace "pmu-num"
target/riscv: Use existing PMU counter mask in FDT generation
target/riscv: Don't assume PMU counters are continuous
target/riscv: Propagate error from PMU setup
target/riscv: cpu: Set the OpenTitan priv to 1.12.0
hw/ssi: ibex_spi_host: Clear the interrupt even if disabled
disas/riscv: Replace TABs with space
disas/riscv: Add support for vector crypto extensions
disas/riscv: Add rv_codec_vror_vi for vror.vi
disas/riscv: Add rv_fmt_vd_vs2_uimm format
target/riscv: Move vector crypto extensions to riscv_cpu_extensions
target/riscv: Expose Zvks[c|g] extnesion properties
target/riscv: Add cfg properties for Zvks[c|g] extensions
target/riscv: Expose Zvkn[c|g] extnesion properties
target/riscv: Add cfg properties for Zvkn[c|g] extensions
target/riscv: Expose Zvkb extension property
target/riscv: Replace Zvbb checking by Zvkb
target/riscv: Add cfg property for Zvkb extension
target/riscv: Expose Zvkt extension property
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
My Iscas mail account will be disabled soon, change to my personal
gmail account.
Signed-off-by: Weiwei Li <liwei1518@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231030081607.115118-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
gic_internal.h is already covered by the "ARM cores" section.
Let's adapt the entry with a wildcard to cover gicv3_internal.h, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231027060709.242388-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert docs/specs/vmgenid.txt to rST format.
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230927151205.70930-9-peter.maydell@linaro.org
Convert docs/specs/virt-ctlr.txt to rST format.
I added the name of the device to give readers a bit more idea
of which device we're actually documenting here.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230927151205.70930-7-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert docs/specs/standard-vga.txt to rST format.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230927151205.70930-6-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert docs/specs/edu.txt to rST format.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230927151205.70930-3-peter.maydell@linaro.org
Convert the docs/specs/vmw_pvscsi-spec.txt file to rST format.
This conversion includes some minor wordsmithing of the text
to fix some grammar nits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230927151205.70930-2-peter.maydell@linaro.org
The networking subsystem may wish to use defer_call(), so move the code
to util/ where it can be reused.
As a reminder of what defer_call() does:
This API defers a function call within a defer_call_begin()/defer_call_end()
section, allowing multiple calls to batch up. This is a performance
optimization that is used in the block layer to submit several I/O requests
at once instead of individually:
defer_call_begin(); <-- start of section
...
defer_call(my_func, my_obj); <-- deferred my_func(my_obj) call
defer_call(my_func, my_obj); <-- another
defer_call(my_func, my_obj); <-- another
...
defer_call_end(); <-- end of section, my_func(my_obj) is called once
Suggested-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230913200045.1024233-3-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I've changed employers, have company email that deals with patch-based
workflows without too much of a headache, and am trying to steer some
content out of my personal mail.
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
