Popular glibc based distributions[1] require minimum
2.6.32 as kernel version. For some targets 2.6.18
would be enough, but dropping so low would mean some
suboptimal system calls could get used.
Set the minimum kernel advertized to 2.6.32 for
all architectures but aarch64 to ensure working qemu
linux-user in case host kernel is older.
[1] https://bugs.launchpad.net/ubuntu/+source/eglibc/+bug/921078
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The following artifical test (just the bitmap operation part) running
vnc_update_client 65536 times on a 2560x2048 surface illustrates the
performance difference:
All bits clean - vnc_update_client_new: 0.07 secs
vnc_update_client_new2: 0.07 secs
vnc_update_client_old: 10.98 secs
All bits dirty - vnc_update_client_new: 11.26 secs
- vnc_update_client_new2: 0.29 secs
vnc_update_client_old: 20.19 secs
Few bits dirty - vnc_update_client_new: 0.07 secs
- vnc_update_client_new2: 0.07 secs
vnc_update_client_old: 10.98 secs
vnc_update_client_new2 shows the performance of vnc_update_client
with this patch added.
Comparing with the test run of the last patch the performance
is at least unchanged while it is significantly improved
for the all bits dirty case.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vnc_update_client currently scans the dirty bitmap of each client
bitwise which is a very costly operation if only few bits are dirty.
vnc_refresh_server_surface does almost the same.
this patch optimizes both by utilizing the heavily optimized
function find_next_bit to find the offset of the next dirty
bit in the dirty bitmaps.
The following artifical test (just the bitmap operation part) running
vnc_update_client 65536 times on a 2560x2048 surface illustrates the
performance difference:
All bits clean - vnc_update_client_new: 0.07 secs
vnc_update_client_old: 10.98 secs
All bits dirty - vnc_update_client_new: 11.26 secs
vnc_update_client_old: 20.19 secs
Few bits dirty - vnc_update_client_new: 0.08 secs
vnc_update_client_old: 10.98 secs
The case for all bits dirty is still rather slow, this
is due to the implementation of find_and_clear_dirty_height.
This will be addresses in a separate patch.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
this allows for setting VNC_DIRTY_PIXELS_PER_BIT to different
values than 16 if desired.
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Spotted by Coverity:
876 static int vnc_update_client_sync(VncState *vs, int has_dirty)
877 {
(1) Event freed_arg: "vnc_update_client(VncState *, int)" frees "vs". [details]
Also see events: [deref_arg]
878 int ret = vnc_update_client(vs, has_dirty);
(2) Event deref_arg: Calling "vnc_jobs_join(VncState *)" dereferences freed pointer "vs". [details]
Also see events: [freed_arg]
879 vnc_jobs_join(vs);
880 return ret;
881 }
Remove vnc_update_client_sync wrapper, replace it with an additional
argument to vnc_update_client, so we can so the sync properly in
vnc_update_client (i.e. skip it in case of a client disconnect).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Hi,
When I use RealVNC viewer client (http://www.realvnc.com/) to connect vnc server,
the client disconnect suddenly, and I click reconnect button immediately, then the Qemu crashed.
In the function vnc_worker_thread_loop, will call vnc_async_encoding_start
to set the local vs->output buffer by global queue's buffer. Then send rectangles to
the vnc client call function vnc_send_framebuffer_update. Finally, Under normal circumstances,
call vnc_async_encoding_end to set the global queue'buffer by the local vs->output conversely.
When the vnc client disconnect, the job->vs->csock will be set to -1. And the current prcoess
logic will goto disconnected partion without call function vnc_async_encoding_end.
But, the function vnc_send_framebuffer_update will call buffer_reserve, which
maybe call g_realloc reset the local vs's buffer, meaning the global queue's buffer is modified also.
If anyone use the original global queue's buffer memory will cause corruption and then crash qemu.
This patch assure the function vnc_async_encoding_end being called
even though the vnc client disconnect suddenly.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
VncTight member uint8_t quality is either (uint8_t)-1 for lossless or
less than 10 for lossy.
tight_detect_smooth_image() first promotes it to int, then compares
with -1. Always unequal, so we always execute the lossy code. Reads
beyond tight_conf[] and returns crap when quality is actually
lossless.
Compare to (uint8_t)-1 instead, like we do elsewhere.
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
we put copy of ROMs in MR for migration.
but the name rom_in_ram makes one think we
load it in guest RAM.
Rename has_mr to make intent clearer.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Both QEMU and KVM have already accumulated a significant number of
optimizations based on the hard-coded assumption that ioapic polarity
will always use the ActiveHigh convention, where the logical and
physical states of level-triggered irq lines always match (i.e.,
active(asserted) == high == 1, inactive == low == 0). QEMU guests
are expected to follow directions given via ACPI and configure the
ioapic with polarity 0 (ActiveHigh). However, even when misbehaving
guests (e.g. OS X <= 10.9) set the ioapic polarity to 1 (ActiveLow),
QEMU will still use the ActiveHigh signaling convention when
interfacing with the emulated ioapic.
This patch modifies the emulated ioapic to completely ignore polarity
as set by the guest OS, enabling misbehaving guests to work alongside
those which comply with the ActiveHigh polarity specified by QEMU's
ACPI tables.
Signed-off-by: Gabriel L. Somlo <somlo@cmu.edu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Bit 7 of Input Port is the keyboard inhibit switch.
0 means keyboard inhibited, while 1 means keyboard enabled.
Incidentaly, this also fixes an error encountered while booting
an Award BIOS: "Keyboard is locked out - Unlock the key".
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In write-only mode, writes are forwarded to RAM, while reads should not be
handled (ie should return 0xff).
Assume that in this mode, no read access is ever done, as they shouldn't
give any sensible result.
So, in write-only mode, alias PAM region to RAM, instead of PCI memory
(which can even be mapped to some device!)
This fixes Award BIOS, which use this mode to shadow system BIOS and video BIOS.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the expected (offline) acpi tables loaded correctly,
it is safe to assume the iasl installation is OK and
issue an error if the actual tables failed to load.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Updated the error message while at it.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gleb's address seems to be out of date. Since it stayed like that for a
while now, I'm guessing he's no longer interested in getting mail.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If enabled, set the thread name at creation (on GNU systems with
pthread_set_np)
Fix up all the callers with a thread name
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add flag storage to qemu-thread-* to store the namethreads flag
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
PCIE is causing asserts each time a multifunction device is added
on command line (coldplug).
This is caused by
commit a66e657e18
pci/pcie: convert PCIE hotplug to use hotplug-handler API
QEMU abort is caused by misplaced assertion, which should
be checked only when device is hotplugged.
Reference to regression report:
http://www.mail-archive.com/qemu-devel@nongnu.org/msg216226.html
Fixes: a66e657e18
Reported-By: Nigel Kukard <nkukard+qemu@lbsd.net>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Windows XP shows COM2 port as non functional in
"Device Manager" although no COM2 port backing device
is present in QEMU.
This regression is really due to
3bb28b7208b349e7a1b326e3c6ef9efac1d462bf?
memory: Provide separate handling of unassigned io ports accesses
That is caused by the fact that QEMU reports to
OSPM that device is present by setting 5th bit in
PII4XPM.pci_conf[0x67] register when COM2 doesn't
exist.
It happens due to memory_region_present(io_as, 0x2f8)
returning false positive since 0x2f8 address eventually
translates into catchall io_as address space.
Fix memory_region_present(parent, addr) by returning
true only if addr maps into a MemoryRegion within
parent (excluding parent itself), to match its
doc comment.
While at it fix copy/paste error in
memory_region_present() doc comment.
Note: this is a temporary hack: we really need better handling for
unassigned regions, we should avoid fallback regions since they are bad
for performance (breaking radix tree assumption that the data structure
is sparsely populated); for memory we need to fix this to implement PCI
master abort properly, anyway.
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
peer_{de,at}tach were called from inside assert().
We don't support building without NDEBUG but it's not tidy.
Rearrange to attach peer outside assert calls.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As reported in
http://article.gmane.org/gmane.comp.emulators.qemu/253987
Mac OSX actually requires describing all occupied slots
in ACPI - even if hotplug isn't enabled.
I didn't expect this so I dropped description of all
non hotpluggable slots from ACPI.
As a result: before
commit 99fd437dee (enable
hotplug for pci bridges), PCI cards show up in the "device tree" of OS X
(System Information). E.g., on MountainLion users have:
Hardware -> PCI Cards:
Card Type Driver Installed Slot
*ethernet Ethernet Controller Yes PCI Slot 2
pci8086,2934 USB UHC Yes PCI Slot 29
ethernet:
Type: Ethernet Controller
Driver Installed: Yes
MSI: No
Bus: PCI
Slot PCI Slot 2
Vendor ID: 0x8086
Device ID: 0x100e
Subsystem Vendor ID: 0x1af4
Subsystem ID: 0x1100
Revision ID: 0x0003
Hardware -> Ethernet Cards
ethernet:
Type: Ethernet Controller
Bus: PCI
Slot PCI Slot 2
Vendor ID: 0x8086
Device ID: 0x100e
Subsystem Vendor ID: 0x1af4
Subsystem ID: 0x1100
Revision ID: 0x0003
BSD name: en0
Kext name: AppleIntel8254XEthernet.kext
Location: /System/Library/Extensions/...
Version: 3.1.1b1
After commit 99fd437dee, users get:
Hardware -> PCI Cards:
This computer doesn't contain any PCI cards. If you installed PCI
cards, make sure they're properly installed.
Hardware -> Ethernet Cards
ethernet:
Type: Ethernet Controller
Bus: PCI
Vendor ID: 0x8086
Device ID: 0x100e
Subsystem Vendor ID: 0x1af4
Subsystem ID: 0x1100
Revision ID: 0x0003
BSD name: en0
Kext name: AppleIntel8254XEthernet.kext
Location: /System/Library/Extensions/...
Version: 3.1.1b1
Ethernet still works, but it's not showing up on the PCI bus, and it
no longer thinks it's plugged in to slot #2, as it used to before the
change.
To fix, append description for all occupied non hotpluggable PCI slots.
One need to be careful when doing this: VGA devices
are now described in SSDT, so we need to drop description from DSDT.
And ISA devices are used in DSDT so drop them from SSDT.
Reported-by: Gabriel L. Somlo <gsomlo@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Also update generated dsdt and pcihp hex dump files.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 023261ef85 failed to remove a
nop that's no longer required.
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
At first glance the code appears to be using 1's compliment encoding,
a-la AArch32. Except that the constant is "off", creating a complicated
split field 2's compliment encoding.
Much clearer to just use a normal mask and shift.
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
It was unused. Let's not overcomplicate things before we need them.
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This reduces the code size of the function significantly.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We assert that the values for _I32 and _I64 are 0 and 1 respectively.
This will make a couple of functions declared by tcg.c cleaner.
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Removed from other targets in 56bbc2f967.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This adds @idstr to savevm_section_start and savevm_section_end
tracepoints.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It might be useful for tracing migration.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewers accepted v2 of the patch, but what got committed was v1,
with the R-bys for v2. This is the v1->v2 followup fix.
[Amit:
This fixes commit aded6539d9
]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Resizing the xbzrle cache during migration causes qemu-crash,
because the main-thread and migration-thread modify the xbzrle
cache size concurrently without lock-protection.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
* remotes/kvaneesh/for-upstream:
hw/9pfs: Include virtio-9p-device.o in build
hw/9pfs: use g_strdup_printf() instead of PATH_MAX limitation
hw/9pfs/virtio-9p-local.c: use snprintf() instead of sprintf()
hw/9pfs/virtio-9p-local.c: move v9fs_string_free() to below "err_out:"
fsdev: Fix overrun after readlink() fills buffer completely
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6sTe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Fri 07 Mar 2014 13:30:04 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream:
block: qemu-iotests 085 - live snapshots tests
hw/ide/ahci.h: Avoid shifting left into sign bit
block: Fix error path segfault in bdrv_open()
qemu-iotests: Test a few blockdev-add error cases
blockdev: Fix NULL pointer dereference in blockdev-add
blockdev: Fail blockdev-add with encrypted images
block/raw-win32: Strip "file:" prefix on creation
block/raw-win32: Implement bdrv_parse_filename()
block/raw-posix: Strip "file:" prefix on creation
block/raw-posix: Implement bdrv_parse_filename()
block: Keep "filename" option after parsing
block: mirror - remove code cruft that has no function
block: make bdrv_swap rebuild the bs graph node list field.
block: Fix bs->request_alignment assertion for bs->sg=1
iscsi: Use bs->sg for everything else than disks
qemu-iotests: Test progress output for conversion
qemu-img convert: Fix progress output
gluster: Remove unused defines and header include
gluster: Change licence to GPLv2+
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass all the relevant sub-directory make variables.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20140120112153.5685.30949.stgit@fimbulvetr.bsc.es
In commit 5643706a09 (console: add head
to index to qemu consoles.) graphic_console_init() was extended to take
an additional argument, but xenfb was not updated accordingly. Fix it.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Don Slutz <dslutz@verizon.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1394228528-31625-1-git-send-email-afaerber@suse.de
This improves performance for those guests that issue the new
CCW_CMD_SET_IND_ADAPTER channel command.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=AyDR
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/virtio-ccw-20140305' into staging
One patch introducing support for adapter interrupts in virtio-ccw.
This improves performance for those guests that issue the new
CCW_CMD_SET_IND_ADAPTER channel command.
# gpg: Signature made Wed 05 Mar 2014 08:48:18 GMT using RSA key ID C6F02FAF
# gpg: Can't check signature: public key not found
* remotes/cohuck/tags/virtio-ccw-20140305:
s390x/virtio-ccw: Adapter interrupt support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds tests for live snapshots, both through the single
snapshot command, and the transaction group snapshot command.
The snapshots are done through the QMP interface, using the
following commands for snapshots:
Single snapshot:
{ 'execute': 'blockdev-snapshot-sync', 'arguments':
{ 'device': 'virtio0', 'snapshot-file':'...',
'format': 'qcow2' } }"
Group snapshot:
{ 'execute': 'transaction', 'arguments':
{'actions': [
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio0', 'snapshot-file': '...' } },
{ 'type': 'blockdev-snapshot-sync', 'data' :
{ 'device': 'virtio1', 'snapshot-file': '...' } } ]
} }
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add 'U' suffixes to avoid undefined behaviour shifting left into
the signed bit of a signed integer type. Clang's sanitizer will
warn about this:
hw/ide/ahci.c:1210:27: runtime error: left shift of 1 by 31 places cannot be represented in type 'int'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
