In touch_all_pages, if the mutex is not taken around qemu_cond_broadcast,
qemu_cond_broadcast may be called before all touch page threads enter
qemu_cond_wait. In this case, the touch page threads wait forever for the
main thread to wake them up, causing a deadlock.
Signed-off-by: Bauerchen <bauerchen@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The mutex and condition variable were never initialized, causing
-mem-prealloc to abort with an assertion failure.
Fixes: 037fb5eb39
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Cc: bauerchen <bauerchen@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[desc]:
Large memory VM starts slowly when using -mem-prealloc, and
there are some areas to optimize in current method;
1、mmap will be used to alloc threads stack during create page
clearing threads, and it will attempt mm->mmap_sem for write
lock, but clearing threads have hold read lock, this competition
will cause threads createion very slow;
2、methods of calcuating pages for per threads is not well;if we use
64 threads to split 160 hugepage,63 threads clear 2page,1 thread
clear 34 page,so the entire speed is very slow;
to solve the first problem,we add a mutex in thread function,and
start all threads when all threads finished createion;
and the second problem, we spread remainder to other threads,in
situation that 160 hugepage and 64 threads, there are 32 threads
clear 3 pages,and 32 threads clear 2 pages.
[test]:
320G 84c VM start time can be reduced to 10s
680G 84c VM start time can be reduced to 18s
Signed-off-by: bauerchen <bauerchen@tencent.com>
Reviewed-by: Pan Rui <ruippan@tencent.com>
Reviewed-by: Ivan Ren <ivanren@tencent.com>
[Simplify computation of the number of pages per thread. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are three page size in qemu:
real host page size
host page size
target page size
All of them have dedicate variable to represent. For the last two, we
use the same form in the whole qemu project, while for the first one we
use two forms: qemu_real_host_page_size and getpagesize().
qemu_real_host_page_size is defined to be a replacement of
getpagesize(), so let it serve the role.
[Note] Not fully tested for some arch or device.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191013021145.16011-3-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Neither stat(2) nor lseek(2) report the size of Linux devdax pmem
character device nodes. Commit 314aec4a6e
("hostmem-file: reject invalid pmem file sizes") added code to
hostmem-file.c to fetch the size from sysfs and compare against the
user-provided size=NUM parameter:
if (backend->size > size) {
error_setg(errp, "size property %" PRIu64 " is larger than "
"pmem file \"%s\" size %" PRIu64, backend->size,
fb->mem_path, size);
return;
}
It turns out that exec.c:qemu_ram_alloc_from_fd() already has an
equivalent size check but it skips devdax pmem character devices because
lseek(2) returns 0:
if (file_size > 0 && file_size < size) {
error_setg(errp, "backing store %s size 0x%" PRIx64
" does not match 'size' option 0x" RAM_ADDR_FMT,
mem_path, file_size, size);
return NULL;
}
This patch moves the devdax pmem file size code into get_file_size() so
that we check the memory size in a single place:
qemu_ram_alloc_from_fd(). This simplifies the code and makes it more
general.
This also fixes the problem that hostmem-file only checks the devdax
pmem file size when the pmem=on parameter is given. An unchecked
size=NUM parameter can lead to SIGBUS in QEMU so we must always fetch
the file size for Linux devdax pmem character device nodes.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190830093056.12572-1-stefanha@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
besides the existing 'shared' flags, we are going to add
'is_pmem' to qemu_ram_mmap(), which indicated the memory backend
file is a persist memory.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Zhang Yi <yi.z.zhang@linux.intel.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <786c46862cfeb253ee0ea2f44d62ffe76edb7fa4.1549555521.git.yi.z.zhang@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Previous to OpenBSD 6.3 [1], fcntl(F_SETFL) is not permitted on
memory devices.
Trying this call sets errno to ENODEV ("not a memory device"):
19 ENODEV Operation not supported by device.
An attempt was made to apply an inappropriate function to a device,
for example, trying to read a write-only device such as a printer.
Do not assert fcntl failures in this specific case (errno set to ENODEV)
on OpenBSD. This fixes:
$ lm32-softmmu/qemu-system-lm32
assertion "f != -1" failed: file "util/oslib-posix.c", line 247, function "qemu_set_nonblock"
Abort trap (core dumped)
[1] The fix seems https://github.com/openbsd/src/commit/c2a35b387f9d3c
"fcntl(F_SETFL) invokes the FIONBIO and FIOASYNC ioctls internally, so
the memory devices (/dev/null, /dev/zero, etc) need to permit them."
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190307142822.8531-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Guests started with NVDIMMs larger than the underlying host file produce
confusing errors inside the guest. This happens because the guest
accesses pages beyond the end of the file.
Check the pmem file size on startup and print a clear error message if
the size is invalid.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1669053
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Zhang Yi <yi.z.zhang@linux.intel.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190214031004.32522-3-stefanha@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The commit 7197fb4058 ("util/mmap-alloc:
fix hugetlb support on ppc64") fixed Huge TLB mappings on ppc64.
However, we still need to consider the underlying huge page size
during munmap() because it requires that both address and length be a
multiple of the underlying huge page size for Huge TLB mappings.
Quote from "Huge page (Huge TLB) mappings" paragraph under NOTES
section of the munmap(2) manual:
"For munmap(), addr and length must both be a multiple of the
underlying huge page size."
On ppc64, the munmap() in qemu_ram_munmap() does not work for Huge TLB
mappings because the mapped segment can be aligned with the underlying
huge page size, not aligned with the native system page size, as
returned by getpagesize().
This has the side effect of not releasing huge pages back to the pool
after a hugetlbfs file-backed memory device is hot-unplugged.
This patch fixes the situation in qemu_ram_mmap() and
qemu_ram_munmap() by considering the underlying page size on ppc64.
After this patch, memory hot-unplug releases huge pages back to the
pool.
Fixes: 7197fb4058
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Assert that the return value is not an error. This is like commit
7e6478e7d4 for qemu_set_cloexec.
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use MAP_STACK in qemu_alloc_stack() on OpenBSD.
Added to our 6.4 release.
MAP_STACK Indicate that the mapping is used as a stack. This
flag must be used in combination with MAP_ANON and
MAP_PRIVATE.
Implement MAP_STACK option for mmap(). Synchronous faults (pagefault and
syscall) confirm the stack register points at MAP_STACK memory, otherwise
SIGSEGV is delivered. sigaltstack() and pthread_attr_setstack() are modified
to create a MAP_STACK sub-region which satisfies alignment requirements.
Observe that MAP_STACK can only be set/cleared by mmap(), which zeroes the
contents of the region -- there is no mprotect() equivalent operation, so
there is no MAP_STACK-adding gadget.
Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181019125239.GA13884@humpty.home.comstyle.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently only file backed memory backend can
be created with a "share" flag in order to allow
sharing guest RAM with other processes in the host.
Add the "share" flag also to RAM Memory Backend
in order to allow remapping parts of the guest RAM
to different host virtual addresses. This is needed
by the RDMA devices in order to remap non-contiguous
QEMU virtual addresses to a contiguous virtual address range.
Moved the "share" flag to the Host Memory base class,
modified phys_mem_alloc to include the new parameter
and a new interface memory_region_init_ram_shared_nomigrate.
There are no functional changes if the new flag is not used.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Check for the presence of posix_memalign() in the configure script,
not using "defined(_POSIX_C_SOURCE) && !defined(__sun__)". This
lets qemu use posix_memalign() on NetBSD versions that have it,
instead of falling back to valloc() which is wasteful when the
required alignment is smaller than a page.
Signed-off-by: Andreas Gustafsson <gson@gson.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
NetBSD 8.0(beta) ships with KERN_PROC_PATHNAME in sysctl(2).
Older NetBSD versions can use argv[0] parsing fallback.
This code section is partly shared with FreeBSD.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Message-id: 20171028194833.23858-1-n54@gmx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
gcc warning:
/qemu/util/oslib-posix.c:304:11: error:
variable ‘addr’ might be clobbered by ‘longjmp’ or ‘vfork’
[-Werror=clobbered]
Fix also some related data types:
numpages, hpagesize are used as pointer offset.
Always use size_t for them and also for the derived
numpages_per_thread and size_per_thread.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 20171016202912.1117-1-sw@weilnetz.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If QEMU is running on a system that's out of memory and mmap()
fails, QEMU aborts with no error message at all, making it hard
to debug the reason for the failure.
Add perror() calls that will print error information before
aborting.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170829212053.6003-1-ehabkost@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On NetBSD the compiler warns:
util/oslib-posix.c: In function 'sigaction_invoke':
util/oslib-posix.c:589:5: warning: missing braces around initializer [-Wmissing-braces]
siginfo_t si = { 0 };
^
util/oslib-posix.c:589:5: warning: (near initialization for 'si.si_pad') [-Wmissing-braces]
because on this platform siginfo_t is defined as
typedef union siginfo {
char si_pad[128]; /* Total size; for future expansion */
struct _ksiginfo _info;
} siginfo_t;
Avoid this warning by initializing the struct with {} instead;
this is a GCC extension but we use it all over the codebase already.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1500568341-8389-1-git-send-email-peter.maydell@linaro.org
Now that qcow & qcow2 are wired up to get encryption keys
via the QCryptoSecret object, nothing is relying on the
interactive prompting for passwords. All the code related
to password prompting can thus be ripped out.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-17-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Assert that the return value is not an error. This issue was found by
Coverity.
CID: 1374831
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
CC: groug@kaod.org
CC: pbonzini@redhat.com
CC: Eric Blake <eblake@redhat.com>
Message-Id: <1494356693-13190-2-git-send-email-sstabellini@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that 9pfs and virtfs-proxy-helper have been converted to utimensat(),
we don't need to keep qemu_utimens() anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
This was spotted by Coverity, in case where sysconf(_SC_NPROCESSORS_ONLN)
fails and returns -1. This results in memset_num_threads getting set to -1.
Which we then pass to g_new0().
The patch replaces MAX_MEM_PREALLOC_THREAD_COUNT macro with a function call
get_memset_num_threads() to handle sysconf() failure gracefully. In case
sysconf() fails, we fall back to single threaded.
(Spotted by Coverity, CID 1372465.)
Signed-off-by: Jitendra Kolhe <jitendra.kolhe@hpe.com>
Message-Id: <1490079006-32495-1-git-send-email-jitendra.kolhe@hpe.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
si_band is not found in OpenBSD. It is marked as obsolescent in
POSIX, so we can delete it without any remorse.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170317152214.6148-1-pbonzini@redhat.com
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When using a memory-backend object with prealloc turned on, QEMU
will memset() the first byte in every memory page to zero. While
this might have been acceptable for memory backends associated
with RAM, this corrupts application data for NVDIMMs.
Instead of setting every page to zero, read the current byte
value and then just write that same value back, so we are not
corrupting the original data. Directly write the value instead
of memset()ing it, since there's no benefit to memset for a
single byte write.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Message-id: 20170303113255.28262-1-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Using "-mem-prealloc" option for a large guest leads to higher guest
start-up and migration time. This is because with "-mem-prealloc" option
qemu tries to map every guest page (create address translations), and
make sure the pages are available during runtime. virsh/libvirt by
default, seems to use "-mem-prealloc" option in case the guest is
configured to use huge pages. The patch tries to map all guest pages
simultaneously by spawning multiple threads. Currently limiting the
change to QEMU library functions on POSIX compliant host only, as we are
not sure if the problem exists on win32. Below are some stats with
"-mem-prealloc" option for guest configured to use huge pages.
------------------------------------------------------------------------
Idle Guest | Start-up time | Migration time
------------------------------------------------------------------------
Guest stats with 2M HugePage usage - single threaded (existing code)
------------------------------------------------------------------------
64 Core - 4TB | 54m11.796s | 75m43.843s
64 Core - 1TB | 8m56.576s | 14m29.049s
64 Core - 256GB | 2m11.245s | 3m26.598s
------------------------------------------------------------------------
Guest stats with 2M HugePage usage - map guest pages using 8 threads
------------------------------------------------------------------------
64 Core - 4TB | 5m1.027s | 34m10.565s
64 Core - 1TB | 1m10.366s | 8m28.188s
64 Core - 256GB | 0m19.040s | 2m10.148s
-----------------------------------------------------------------------
Guest stats with 2M HugePage usage - map guest pages using 16 threads
-----------------------------------------------------------------------
64 Core - 4TB | 1m58.970s | 31m43.400s
64 Core - 1TB | 0m39.885s | 7m55.289s
64 Core - 256GB | 0m11.960s | 2m0.135s
-----------------------------------------------------------------------
Changed in v2:
- modify number of memset threads spawned to min(smp_cpus, 16).
- removed 64GB memory restriction for spawning memset threads.
Changed in v3:
- limit number of threads spawned based on
min(sysconf(_SC_NPROCESSORS_ONLN), 16, smp_cpus)
- implement memset thread specific siglongjmp in SIGBUS signal_handler.
Changed in v4
- remove sigsetjmp/siglongjmp and SIGBUS unblock/block for main thread
as main thread no longer touches any pages.
- simplify code my returning memset_thread_failed status from
touch_all_pages.
Signed-off-by: Jitendra Kolhe <jitendra.kolhe@hpe.com>
Message-Id: <1487907103-32350-1-git-send-email-jitendra.kolhe@hpe.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The cast is there because sigbus_handler is invoked via sigfd_handler.
But it feels just wrong to use struct qemu_signalfd_siginfo in the
prototype of a function that is passed to sigaction.
Instead, do a simple-minded conversion of qemu_signalfd_siginfo to
siginfo_t.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Include sys/user.h for declaration of 'struct kinfo_proc'.
Add -lutil to qemu-ga link for kinfo_getproc.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Message-id: 1479778365-11315-1-git-send-email-emaste@freebsd.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some files contain multiple #includes of the same header file.
Removed most of those unnecessary duplicate entries using
scripts/clean-includes.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Anand J <anand.indukala@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This is a small helper that tries to fetch binary name for given
PID.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <4d75d475c1884f8e94ee8b1e57273ddf3ed68bf7.1474987617.git.mprivozn@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
this adds a knob to track the maximum stack usage of stacks
created by qemu_alloc_stack.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
the allocated stack will be adjusted to the minimum supported stack size
by the OS and rounded up to be a multiple of the system pagesize.
Additionally an architecture dependent guard page is added to the stack
to catch stack overflows.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When adding hostmem backend at runtime, QEMU might exit with error:
"os_mem_prealloc: Insufficient free host memory pages available to allocate guest RAM"
It happens due to os_mem_prealloc() not handling errors gracefully.
Fix it by passing errp argument so that os_mem_prealloc() could
report error to callers and undo performed allocation when
os_mem_prealloc() fails.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1469008443-72059-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use g_path_get_basename to get the directory components of
a file name, and free its return when no longer needed.
Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com>
Message-Id: <1459997185-15669-3-git-send-email-weijg.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tracked down with an ugly, brittle and probably buggy Perl script.
Also move includes converted to <...> up so they get included before
ours where that's obviously okay.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h. Include it in
sysemu/os-posix.h and remove it from everywhere else.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While in the anonymous ram case we already take care of the right alignment
such an alignment gurantee does not exist for file backed ram allocation.
Instead, pagesize is used for alignment. On s390 this is not enough for gmap,
as we need to satisfy an alignment up to segments.
Reported-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Message-Id: <1461585338-45863-1-git-send-email-dingel@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For KVM to use Transparent Huge Pages (THP) we have to ensure that the
alignment of the userspace address of the KVM memory slot and the IPA
that the guest sees for a memory region have the same offset from the 2M
huge page size boundary.
One way to achieve this is to always align the IPA region at a 2M
boundary and ensure that the mmap alignment is also at 2M.
Unfortunately, we were only doing this for __arm__, not for __aarch64__,
so add this simple condition.
This fixes a performance regression using KVM/ARM on AArch64 platforms
that showed a performance penalty of more than 50%, introduced by the
following commit:
9fac18f (oslib: allocate PROT_NONE pages on top of RAM, 2015-09-10)
We were only lucky before the above commit, because we were allocating
large regions and naturally getting a 2M alignment on those allocations
then.
Cc: qemu-stable@nongnu.org
Reported-by: Shih-Wei Li <shihwei@cs.columbia.edu>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: wrapped long line]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJW9ErPAAoJEL/70l94x66DJfEH/A/QkMpAhrgNdyVsahzsGrzE
wx5gHFIc1nBYxyr62w4apUb5jPB7zaXu0LA7EAWDeAe0pyP8hZzLT9kJyOEDsuJu
zwKN2QeLSNMtPbnbKN0I/YQ2za2xX1V5ruhSeOJoVslUI214hgnAURaGshhQNzuZ
2CluDT9KgL5cQifAnKs5kJrwhIYShYNQB+1eDC/7wk28dd/EH+sPALIoF+rqrSmt
Zu4Mdqd+9Ns+oKOjA6br9ULq/Hzg0aDfY82J+XLVVqfF3PXQe8rTDmuMf/7jTn+M
Un7ZOcei9oZF2/9vfAfKQpDCcgD9HvOUSbgqV/ubmkPPmN/LNJzeKj0fBhrRN+Y=
=K12D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Log filtering from Alex and Peter
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
# gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (28 commits)
target-i386: implement PKE for TCG
config.status: Pass extra parameters
char: translate from QIOChannel error to errno
exec: fix error handling in file_ram_alloc
cputlb: modernise the debug support
qemu-log: support simple pid substitution for logs
target-arm: dfilter support for in_asm
qemu-log: dfilter-ise exec, out_asm, op and opt_op
qemu-log: new option -dfilter to limit output
qemu-log: Improve the "exec" TB execution logging
qemu-log: Avoid function call for disabled qemu_log_mask logging
qemu-log: correct help text for -d cpu
tcg: pass down TranslationBlock to tcg_code_gen
util: move declarations out of qemu-common.h
Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND
hw: explicitly include qemu-common.h and cpu.h
include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h
isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h
Move ParallelIOArg from qemu-common.h to sysemu/char.h
Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
scripts/clean-includes
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As soon as setjmp.h is included from qemu/osdep.h, those old include
statements are no longer needed.
Add also setjmp.h to the list in scripts/clean-includes.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
The right place for "work around issues with system headers" code
is osdep.h. Move the workaround for OSX's stdlib.h emitting a
deprecation warning for daemon() to that header.
This also fixes a problem where running clean-includes on
oslib-posix.c would erroneously remove the #include <stdlib.h>
from it, breaking the workaround.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-6-git-send-email-peter.maydell@linaro.org
