This is a QAPI/QMP only command to take a snapshot of a group of
devices. This is similar to the blockdev-snapshot-sync command, except
blockdev-group-snapshot-sync accepts a list devices, filenames, and
formats.
It is attempted to keep the snapshot of the group atomic; if the
creation or open of any of the new snapshots fails, then all of
the new snapshots are abandoned, and the name of the snapshot image
that failed is returned. The failure case should not interrupt
any operations.
Rather than use bdrv_close() along with a subsequent bdrv_open() to
perform the pivot, the original image is never closed and the new
image is placed 'in front' of the original image via manipulation
of the BlockDriverState fields. Thus, once the new snapshot image
has been successfully created, there are no more failure points
before pivoting to the new snapshot.
This allows the group of disks to remain consistent with each other,
even across snapshot failures.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Image files that make qemu-img info read several gigabytes into the
unknown header extensions list are bad. Just fail opening the image
if an extension claims to be larger than the header extension area.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The spec says that the length of extensions is padded to 8 bytes, not
the offset. Currently this is the same because the header size is a
multiple of 8, so this is only about compatibility with future changes
to the header size.
While touching it, move the calculation to a common place instead of
duplicating it for each header extension type.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
sync_aiocb is unused since commit ce1a14d (Dynamically allocate AIO
Completion Blocks., 2006-08-07).
private is unused since commit 56a1493 (drive cleanup fixes., 2009-09-25).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Requesting a read or a write operation on an empty disk can lead
to QEMU dumping core.
Also fix a few braces here and there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The seek command just sends step pulses to the drive and doesn't care if
there is a medium inserted of if it is banging the head against the drive.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The programmed rate has to be the same as the required rate for the
floppy format ; if that's not the case, the transfer should abort.
This check can be disabled by using the 'check_media_rate' property.
Save media rate value only if media rate check is enabled.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Set it to true for current Qemu versions, and false for previous ones
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Floppies must be read at a specific transfer rate, depending of its own format.
Update floppy description table to include required transfer rate.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
DIR and CCR registers share the same address ; DIR is read-only
while CCR is write-only
CCR register is used to change media transfer rate, which will be
checked in following changes.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A real floppy doesn't attempt to write to read-only media either.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In fact, only three control commands generate an interrupt:
read_id, recalibrate and seek
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This bit must be active while a command is currently executed.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Floppies can be simple or double-sided. However, current code
was only taking the common case into account (ie 2 sides).
This repairs single-sided floppies, which where totally broken
before this patch : for track > 0, wrong sector number was
calculated, and data was read/written at wrong place on
underlying device.
Fortunately, only some 360 kB floppies are single-sided, so
this bug was probably not seen much.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When storing large contiguous ranges in phys_map, all values tend to
be the same pointers to a single MemoryRegionSection. Collapse them
by marking nodes with level > 0 as leaves. This reduces tree memory
usage dramatically.
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of considering subpage on a per-page basis, split each section
into a subpage head, multipage body, and subpage tail, and register
each separately. This simplifies the registration functions.
Signed-off-by: Avi Kivity <avi@redhat.com>
We no longer describe memory in terms of individual pages; use sections
throughout instead.
PhysPageDesc no longer used - remove.
Signed-off-by: Avi Kivity <avi@redhat.com>
If the first subpage installed in a page is RAM, then we install it as
a full page, instead of a subpage. Fix by not special casing RAM.
The issue dates to commit db7b5426a4, which introduced subpages.
Signed-off-by: Avi Kivity <avi@redhat.com>
Use an expanding vector to store nodes. Allocation is baroque to g_renew()
potentially invalidating pointers; this will be addressed later.
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of storing PhysPageDesc, store pointers to MemoryRegionSections.
The various offsets (phys_offset & ~TARGET_PAGE_MASK,
PHYS_OFFSET & TARGET_PAGE_MASK, region_offset) can all be synthesized
from the information in a MemoryRegionSection. Adjust phys_page_find()
to synthesize a PhysPageDesc.
The upshot is that phys_map now contains uniform values, so it's easier
to generate and compress.
The end result is somewhat clumsy but this will be improved as we we
propagate MemoryRegionSections throughout the code instead of transforming
them to PhysPageDesc.
The MemoryRegionSection pointers are stored as uint16_t offsets in an
array. This saves space (when we also compress node pointers) and is
more cache friendly.
Signed-off-by: Avi Kivity <avi@redhat.com>
L1 and the lower levels in l1_phys_map are equivalent, except that L1 has
a different size, and is always allocated. Simplify the code by removing
L1. This leaves us with a tree composed solely of L2 tables, but that
problem can be renamed away later.
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of incrementally building the memory map, rebuild it every time.
This allows later simplification, since the code need not consider overlaying
a previous mapping. It is also RCU friendly.
With large memory guests this can get expensive, since the operation is
O(mem size), but this will be optimized later.
As a side effect subpage and L2 leaks are fixed here.
Signed-off-by: Avi Kivity <avi@redhat.com>
Current memory listeners are incremental; that is, they are expected to
maintain their own state, and receive callbacks for changes to that state.
This patch adds support for stateless listeners; these work by receiving
a ->begin() callback (which tells them that new state is coming), a
sequence of ->region_add() and ->region_nop() callbacks, and then a
->commit() callback which signifies the end of the new state. They should
ignore ->region_del() callbacks.
Signed-off-by: Avi Kivity <avi@redhat.com>
All functionality has been moved to various MemoryListeners.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This transforms memory.c into a library which can then be unit tested
easily, by feeding it inputs and listening to its outputs.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
It can be derived from the MemoryRegion itself (which is why it is not
used there).
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
.readonly cannot be obtained from the MemoryRegion, since it is
inherited from aliases (so you can have a MemoryRegion mapped RW
at one address and RO at another). Record it in a MemoryRegionSection
for listeners.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This allows reverse iteration, which in turns allows consistent ordering
among multiple listeners:
l1->add
l2->add
l2->del
l1->del
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
memory_region_set_offset() complicates the API, and has been deprecated
since its introduction. Now that it is no longer used, remove it.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
memory_region_set_offset() will be going away soon, so don't use it.
Use an alias instead.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Like the related macro TCG_TARGET_LONG, HOST_LONG_BITS can be determined
by the C preprocessor. It is also not used in Makefiles.
So there is no need to calculate it in configure, and it can be defined
in qemu-common.h.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
