Fill the terminal box from right to left to avoid
Gtk-WARNING **: Allocating size to GtkScrollbar 0x55f6d54b0200 without
calling gtk_widget_get_preferred_width/height(). How does the code
know the size to allocate?
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: 902aaef8-d20e-0530-dea2-cdfe3db33ff3@web.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add QAPI DisplayType enum, DisplayOptions union and DisplayGTK struct.
Switch gtk configuration to use the qapi type.
Some bookkeeping (fullscreen for example) is done twice now, this is
temporary until more/all UIs are switched over to qapi configuration.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180202111022.19269-5-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In previous commit:
commit 6aa22a2918
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Dec 18 19:12:27 2017 +0000
ui: add trace events related to VNC client throttling
trace points related to unthrottling client I/O were missed from the
SASL codepaths.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20180205114938.15784-5-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'vs->as.freq' value is a signed integer, which is read from an
unsigned 32-bit int field on the wire. There is thus a risk of overflow
on 32-bit platforms. Move the frequency limit checking to be done at
time of read before casting to a signed integer.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180205114938.15784-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The start_auth_sasl() method declares a 'Error *local_err' variable in
an inner if () {...} scope, which shadows a variable of the same name
declared at the start of the method. This is confusing for reviewers and
may trigger compiler warnings.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180205114938.15784-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For very large framebuffers, it is theoretically possible for the result
of 'vs->throttle_output_offset * VNC_THROTTLE_OUTPUT_LIMIT_SCALE' to
exceed the size of a 32-bit int. For this to happen in practice, the
video RAM would have to be set to a large enough value, which is not
likely today. None the less we can be paranoid against future growth by
using division instead of multiplication when checking the limits.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180205114938.15784-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When qemu mouse mode changes from relative to absolute
we must turn off sdl relative mouse mode too.
Fixes: https://bugs.launchpad.net/qemu/+bug/1703795
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20180202120803.11501-1-kraxel@redhat.com>
The documentation on SDL_RenderPresent function states that
"the backbuffer should be considered invalidated after each present",
so copy the entire texture on each redraw.
On the other hand, SDL_UpdateTexture function is described as
"fairly slow function", so restrict it to just the changed pixels.
Also added SDL_RenderClear call, as suggested in the documentation
page on SDL_RenderPresent.
Signed-off-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Message-id: 20180205133228.25082-1-anatoly.trosinenko@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On one of our client's node, due to trying to read from closed ioc,
a segmentation fault occured. Corresponding backtrace:
0 object_get_class (obj=obj@entry=0x0)
1 qio_channel_readv_full (ioc=0x0, iov=0x7ffe55277180 ...
2 qio_channel_read (ioc=<optimized out> ...
3 vnc_client_read_buf (vs=vs@entry=0x55625f3c6000, ...
4 vnc_client_read_plain (vs=0x55625f3c6000)
5 vnc_client_read (vs=0x55625f3c6000)
6 vnc_client_io (ioc=<optimized out>, condition=G_IO_IN, ...
7 g_main_dispatch (context=0x556251568a50)
8 g_main_context_dispatch (context=context@entry=0x556251568a50)
9 glib_pollfds_poll ()
10 os_host_main_loop_wait (timeout=<optimized out>)
11 main_loop_wait (nonblocking=nonblocking@entry=0)
12 main_loop () at vl.c:1909
13 main (argc=<optimized out>, argv=<optimized out>, ...
Having analyzed the coredump, I understood that the reason is that
ioc_tag is reset on vnc_disconnect_start and ioc is cleaned
in vnc_disconnect_finish. Between these two events due to some
reasons the ioc_tag was set again and after vnc_disconnect_finish
the handler is running with freed ioc,
which led to the segmentation fault.
The patch checks vs->disconnecting in places where we call
qio_channel_add_watch and resets handler if disconnecting == TRUE
to prevent such an occurrence.
Signed-off-by: Klim Kireev <klim.kireev@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180207094844.21402-1-klim.kireev@virtuozzo.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vnc_listen_io() does not own the reference on the 'cioc' parameter is it
passed, so should not be unref'ing it.
Fixes: 13e1d0e71e
Reported-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180215102602.10864-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-19-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-14-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qlist.h
drop from 4551 (out of 4743) to 16 in my "build everything" tree.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-12-armbru@redhat.com>
qapi/qmp/types.h is a convenience header to include a number of
qapi/qmp/ headers. Since we rarely need all of the headers
qapi/qmp/types.h includes, we bypass it most of the time. Most of the
places that use it don't need all the headers, either.
Include the necessary headers directly, and drop qapi/qmp/types.h.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-9-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-6-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-4-armbru@redhat.com>
keycodemapdb updated to add the QKeyCodes muhenkan and katakanahiragana
Signed-off-by: Miika S <miika9764@gmail.com>
Message-Id: <20180116134217.8725-12-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In this previous commit:
commit 8f61f1c5a6
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Dec 18 19:12:20 2017 +0000
ui: track how much decoded data we consumed when doing SASL encoding
I attempted to fix a flaw with tracking how much data had actually been
processed when encoding with SASL. With that flaw, the VNC server could
mistakenly discard queued data that had not been sent.
The fix was not quite right though, because it merely decremented the
vs->output.offset value. This is effectively discarding data from the
end of the pending output buffer. We actually need to discard data from
the start of the pending output buffer. We also want to free memory that
is no longer required. The correct way to handle this is to use the
buffer_advance() helper method instead of directly manipulating the
offset value.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20180201155841.27509-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The VNC server already has the ability to listen on multiple sockets.
Converting it to use the QIONetListener APIs though, will reduce the
amount of code in the VNC server and improve the clarity of what is
left.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180201164514.10330-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The previous commit:
commit 2ec78706d1
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Jan 17 16:47:15 2018 +0000
ui: convert GTK and SDL1 frontends to keycodemapdb
changed the x_keymap.c keymap so that its target was qcodes instead of
qnums. It updated the GTK frontend to take account of this change, but
forgot to update the SDL1 frontend. Thus the SDL frontend was getting
qcodes but dispatching them as if they were qnums. IOW, keyboard input
was completely hosed with SDL1. Since the keyboard layout tables are
still all based on qnums, it is easier to just keep SDL1 using qnums as
it will be deleted in a few releases time.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20180201180033.14255-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The qcode-to-linux keymaps was accidentally added in the wrong place
by
commit de80d78594
Author: Owen Smith <owen.smith@citrix.com>
Date: Fri Nov 3 11:56:28 2017 +0000
ui: generate qcode to linux mappings
breaking the alphabetical ordering of keymaps
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180117164118.8510-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the qcode_to_keycode table with automatically
generated tables.
Missing entries in qcode_to_keycode now fixed:
- Q_KEY_CODE_KP_COMMA -> 0x2d
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164118.8510-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the qcode_to_keycode_set1, qcode_to_keycode_set2,
and qcode_to_keycode_set3 tables with automatically
generated tables.
Missing entries in qcode_to_keycode_set1 now fixed:
- Q_KEY_CODE_SYSRQ -> 0x54
- Q_KEY_CODE_PRINT -> 0x54 (NB ignored due to special case)
- Q_KEY_CODE_AGAIN -> 0xe005
- Q_KEY_CODE_PROPS -> 0xe006
- Q_KEY_CODE_UNDO -> 0xe007
- Q_KEY_CODE_FRONT -> 0xe00c
- Q_KEY_CODE_COPY -> 0xe078
- Q_KEY_CODE_OPEN -> 0x64
- Q_KEY_CODE_PASTE -> 0x65
- Q_KEY_CODE_CUT -> 0xe03c
- Q_KEY_CODE_LF -> 0x5b
- Q_KEY_CODE_HELP -> 0xe075
- Q_KEY_CODE_COMPOSE -> 0xe05d
- Q_KEY_CODE_PAUSE -> 0xe046
- Q_KEY_CODE_KP_EQUALS -> 0x59
And some mistakes corrected:
- Q_KEY_CODE_HIRAGANA was mapped to 0x70 (Katakanahiragana)
instead of of 0x77 (Hirigana)
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0xe05d) and is now mapped to 0xe01e
- Q_KEY_CODE_FIND was mapped to 0xe065 (Search) instead
of to 0xe041 (Find)
- Q_KEY_CODE_POWER, SLEEP & WAKE had 0x0e instead of 0xe0
as the prefix
Missing entries in qcode_to_keycode_set2 now fixed:
- Q_KEY_CODE_PRINT -> 0x7f (NB ignored due to special case)
- Q_KEY_CODE_COMPOSE -> 0xe02f
- Q_KEY_CODE_PAUSE -> 0xe077
- Q_KEY_CODE_KP_EQUALS -> 0x0f
And some mistakes corrected:
- Q_KEY_CODE_HIRAGANA was mapped to 0x13 (Katakanahiragana)
instead of of 0x62 (Hirigana)
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0xe02f) and is now not mapped
- Q_KEY_CODE_FIND was mapped to 0xe010 (Search) and is now
not mapped.
- Q_KEY_CODE_POWER, SLEEP & WAKE had 0x0e instead of 0xe0
as the prefix
Missing entries in qcode_to_keycode_set3 now fixed:
- Q_KEY_CODE_ASTERISK -> 0x7e
- Q_KEY_CODE_SYSRQ -> 0x57
- Q_KEY_CODE_LESS -> 0x13
- Q_KEY_CODE_STOP -> 0x0a
- Q_KEY_CODE_AGAIN -> 0x0b
- Q_KEY_CODE_PROPS -> 0x0c
- Q_KEY_CODE_UNDO -> 0x10
- Q_KEY_CODE_COPY -> 0x18
- Q_KEY_CODE_OPEN -> 0x20
- Q_KEY_CODE_PASTE -> 0x28
- Q_KEY_CODE_FIND -> 0x30
- Q_KEY_CODE_CUT -> 0x38
- Q_KEY_CODE_HELP -> 0x09
- Q_KEY_CODE_COMPOSE -> 0x8d
- Q_KEY_CODE_AUDIONEXT -> 0x93
- Q_KEY_CODE_AUDIOPREV -> 0x94
- Q_KEY_CODE_AUDIOSTOP -> 0x98
- Q_KEY_CODE_AUDIOMUTE -> 0x9c
- Q_KEY_CODE_VOLUMEUP -> 0x95
- Q_KEY_CODE_VOLUMEDOWN -> 0x9d
- Q_KEY_CODE_CALCULATOR -> 0xa3
- Q_KEY_CODE_AC_HOME -> 0x97
And some mistakes corrected:
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0x8d) and is now 0x91
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164118.8510-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Drop no_frame flag from sdl_display_init argument list, use a global
variable instead. This is temporary until -no-frame support is dropped
altogether when we remove sdl1 support.
Remove any traces of noframe from sdl2 code. It is just dead code as
sdl2 doesn't support the SDL_NOFRAME window flag any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180115154855.30850-3-kraxel@redhat.com
The SDL 2.0 release was made in Aug, 2013:
https://www.libsdl.org/release/
That will soon be 4 + 1/2 years ago, which is enough time to consider
the 2.0 series widely supported.
Thus we deprecate the SDL 1.2 support, which will allow us to delete it
in the last release of 2018. By this time, SDL 2.0 will be more than 5
years old.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180115142533.24585-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It is a reserved value and doesn't have a corresponding
valid scancode.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164717.15855-5-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Versions of GTK prior to 3.22 did not correctly set the keyval
field when VK_PAUSE was received on Windows.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164717.15855-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The x_keycode_to_pc_keycode and evdev_keycode_to_pc_keycode
tables are replaced with automatically generated tables.
In addition the X11 heuristics are improved to detect running
on XQuartz and XWin X11 servers, to activate the correct OS-X
and Win32 keycode maps.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180117164717.15855-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Pixman returns a signed int for the image width/height, but the VNC
protocol only permits a unsigned int16. Effective framebuffer size
is determined by the guest, limited by the video RAM size, so the
dimensions are unlikely to exceed the range of an unsigned int16,
but this is not currently validated.
With the current use of 'int' for client width/height, the calculation
of offsets in vnc_update_throttle_offset() suffers from integer size
promotion and sign extension, causing coverity warnings
*** CID 1385147: Integer handling issues (SIGN_EXTENSION)
/ui/vnc.c: 979 in vnc_update_throttle_offset()
973 * than that the client would already suffering awful audio
974 * glitches, so dropping samples is no worse really).
975 */
976 static void vnc_update_throttle_offset(VncState *vs)
977 {
978 size_t offset =
>>> CID 1385147: Integer handling issues (SIGN_EXTENSION)
>>> Suspicious implicit sign extension:
"vs->client_pf.bytes_per_pixel" with type "unsigned char" (8 bits,
unsigned) is promoted in "vs->client_width * vs->client_height *
vs->client_pf.bytes_per_pixel" to type "int" (32 bits, signed), then
sign-extended to type "unsigned long" (64 bits, unsigned). If
"vs->client_width * vs->client_height * vs->client_pf.bytes_per_pixel"
is greater than 0x7FFFFFFF, the upper bits of the result will all be 1.
979 vs->client_width * vs->client_height * vs->client_pf.bytes_per_pixel;
Change client_width / client_height to be a size_t to avoid sign
extension and integer promotion. Then validate that dimensions are in
range wrt the RFB protocol u16 limits.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20180118155254.17053-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace all occurs of __FUNCTION__ except for the check in checkpatch
with the non GCC specific __func__.
One line in hcd-musb.c was manually tweaked to pass checkpatch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
[THH: Removed hunks related to pxa2xx_mmci.c (fixed already)]
Signed-off-by: Thomas Huth <thuth@redhat.com>
When using a mouse's scroll wheel in a guest with
the cocoa front-end, the mouse pointer moves up
and down instead of scrolling the window. This
patch fixes this problem.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 20180108180707.7976-1-programmingkidx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The point of writing a macro embedded in a 'do { ... } while (0)'
loop (particularly if the macro has multiple statements or would
otherwise end with an 'if' statement) is so that the macro can be
used as a drop-in statement with the caller supplying the
trailing ';'. Although our coding style frowns on brace-less 'if':
if (cond)
statement;
else
something else;
that is the classic case where failure to use do/while(0) wrapping
would cause the 'else' to pair with any embedded 'if' in the macro
rather than the intended outer 'if'. But conversely, if the macro
includes an embedded ';', then the same brace-less coding style
would now have two statements, making the 'else' a syntax error
rather than pairing with the outer 'if'. Thus, even though our
coding style with required braces is not impacted, ending a macro
with ';' makes our code harder to port to projects that use
brace-less styles.
The change should have no semantic impact. I was not able to
fully compile-test all of the changes (as some of them are
examples of the ugly bit-rotting debug print statements that are
completely elided by default, and I didn't want to recompile
with the necessary -D witnesses - cleaning those up is left as a
bite-sized task for another day); I did, however, audit that for
all files touched, all callers of the changed macros DID supply
a trailing ';' at the callsite, and did not appear to be used
as part of a brace-less conditional.
Found mechanically via: $ git grep -B1 'while (0);' | grep -A1 \\\\
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20171201232433.25193-7-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When SDL2 windows change focus while a key is held, the window that
receives the focus also receives a new KeyDown event, without an
autorepeat flag. This means that if a WM places the qemu console
over the main window after Ctrl-Alt-2, the console closes immediately
after opening. Then, the main window receives the KeyDown event again
and the whole process repeats.
This patch makes the SDL2 UI ignore the KeyDown events on a window that
just received the focus, if the GUI modifier was held. The ignore flag
is reset on a first KeyUp event. This effectively works around the issue
above.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Message-Id: <20171117112258.5888-4-makovick@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
