Install the SASL library to build the VNC SASL auth protocol code.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200309122454.22551-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Description copied from Linux kernel commit from Gustavo A. R. Silva
(see [3]):
--v-- description start --v--
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to
declare variable-length types such as these ones is a flexible
array member [1], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler
warning in case the flexible array does not occur last in the
structure, which will help us prevent some kind of undefined
behavior bugs from being unadvertenly introduced [2] to the
Linux codebase from now on.
--^-- description end --^--
Do the similar housekeeping in the QEMU codebase (which uses
C99 since commit 7be41675f7).
All these instances of code were found with the help of the
following Coccinelle script:
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
};
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
} QEMU_PACKED;
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f
[3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1
Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fix various bugs that might result in an assert() due to
incorrect hflags for M-profile CPUs
* Fix Aspeed SMC Controller user-mode select handling
* Report correct (with-tag) address in fault address register
when TBI is enabled
* cubieboard: make sure SOC object isn't leaked
* fsl-imx25: Wire up eSDHC controllers
* fsl-imx25: Wire up USB controllers
* New board model: orangepi-pc (OrangePi PC)
* ARM/KVM: if user doesn't select GIC version and the
host kernel can only provide GICv3, use that, rather
than defaulting to "fail because GICv2 isn't possible"
* kvm: Only do KVM_SET_VCPU_EVENTS at the last stage of sync
-----BEGIN PGP SIGNATURE-----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=LLqm
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200312' into staging
target-arm queue:
* Fix various bugs that might result in an assert() due to
incorrect hflags for M-profile CPUs
* Fix Aspeed SMC Controller user-mode select handling
* Report correct (with-tag) address in fault address register
when TBI is enabled
* cubieboard: make sure SOC object isn't leaked
* fsl-imx25: Wire up eSDHC controllers
* fsl-imx25: Wire up USB controllers
* New board model: orangepi-pc (OrangePi PC)
* ARM/KVM: if user doesn't select GIC version and the
host kernel can only provide GICv3, use that, rather
than defaulting to "fail because GICv2 isn't possible"
* kvm: Only do KVM_SET_VCPU_EVENTS at the last stage of sync
# gpg: Signature made Thu 12 Mar 2020 16:43:46 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20200312: (36 commits)
target/arm: kvm: Inject events at the last stage of sync
hw/arm/virt: kvm: allow gicv3 by default if v2 cannot work
hw/arm/virt: kvm: Restructure finalize_gic_version()
target/arm/kvm: Let kvm_arm_vgic_probe() return a bitmap
hw/arm/virt: Introduce finalize_gic_version()
hw/arm/virt: Introduce VirtGICType enum type
hw/arm/virt: Document 'max' value in gic-version property description
docs: add Orange Pi PC document
tests/boot_linux_console: Test booting NetBSD via U-Boot on OrangePi PC
tests/boot_linux_console: Add a SLOW test booting Ubuntu on OrangePi PC
tests/boot_linux_console: Add a SD card test for the OrangePi PC board
tests/boot_linux_console: Add initrd test for the Orange Pi PC board
tests/boot_linux_console: Add a quick test for the OrangePi PC board
hw/arm/allwinner: add RTC device support
hw/arm/allwinner-h3: add SDRAM controller device
hw/arm/allwinner-h3: add Boot ROM support
hw/arm/allwinner-h3: add EMAC ethernet device
hw/arm/allwinner: add SD/MMC host controller
hw/arm/allwinner: add Security Identifier device
hw/arm/allwinner: add CPU Configuration module
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test boots Ubuntu Bionic on a OrangePi PC board.
As it requires 1GB of storage, and is slow, this test is disabled
on automatic CI testing.
It is useful for workstation testing. Currently Avocado timeouts too
quickly, so we can't run userland commands.
The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://www.armbian.com/orange-pi-pc/
The Ubuntu image is downloaded from:
https://dl.armbian.com/orangepipc/Bionic_current
This test can be run using:
$ AVOCADO_ALLOW_LARGE_STORAGE=yes \
avocado --show=app,console run -t machine:orangepi-pc \
tests/acceptance/boot_linux_console.py
console: U-Boot SPL 2019.04-armbian (Nov 18 2019 - 23:08:35 +0100)
console: DRAM: 1024 MiB
console: Failed to set core voltage! Can't set CPU frequency
console: Trying to boot from MMC1
console: U-Boot 2019.04-armbian (Nov 18 2019 - 23:08:35 +0100) Allwinner Technology
console: CPU: Allwinner H3 (SUN8I 0000)
console: Model: Xunlong Orange Pi PC
console: DRAM: 1 GiB
console: MMC: mmc@1c0f000: 0
[...]
console: Uncompressing Linux... done, booting the kernel.
console: Booting Linux on physical CPU 0x0
console: Linux version 5.3.9-sunxi (root@builder) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #19.11.3 SMP Mon Nov 18 18:49:43 CET 2019
console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d
console: CPU: div instructions available: patching division code
console: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
console: OF: fdt: Machine model: Xunlong Orange Pi PC
[...]
console: EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
console: done.
console: Begin: Running /scripts/local-bottom ... done.
console: Begin: Running /scripts/init-bottom ... done.
console: systemd[1]: systemd 237 running in system mode. (...)
console: systemd[1]: Detected architecture arm.
console: Welcome to Ubuntu 18.04.3 LTS!
console: systemd[1]: Set hostname to <orangepipc>.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-17-nieklinnenbank@gmail.com
[NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()]
[NL: changed test to boot from SD card via BootROM, added check for 7z]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://www.armbian.com/orange-pi-pc/
The SD image is from the kernelci.org project:
https://kernelci.org/faq/#the-code
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
Alternatively, this test can be run using:
$ avocado --show=console run -t machine:orangepi-pc tests/acceptance/boot_linux_console.py
console: Uncompressing Linux... done, booting the kernel.
console: Booting Linux on physical CPU 0x0
console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d
[...]
console: sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
console: sunxi-mmc 1c0f000.mmc: Linked as a consumer to regulator.2
console: sunxi-mmc 1c0f000.mmc: Got CD GPIO
console: ledtrig-cpu: registered to indicate activity on CPUs
console: hidraw: raw HID events driver (C) Jiri Kosina
console: usbcore: registered new interface driver usbhid
console: usbhid: USB HID core driver
console: Initializing XFRM netlink socket
console: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
console: NET: Registered protocol family 10
console: mmc0: host does not support reading read-only switch, assuming write-enable
console: mmc0: Problem switching card into high-speed mode!
console: mmc0: new SD card at address 4567
console: mmcblk0: mmc0:4567 QEMU! 60.0 MiB
[...]
console: EXT4-fs (mmcblk0): mounting ext2 file system using the ext4 subsystem
console: EXT4-fs (mmcblk0): mounted filesystem without journal. Opts: (null)
console: VFS: Mounted root (ext2 filesystem) on device 179:0.
console: Run /sbin/init as init process
console: EXT4-fs (mmcblk0): re-mounted. Opts: block_validity,barrier,user_xattr,acl
console: Starting syslogd: OK
console: Starting klogd: OK
console: Populating /dev using udev: udevd[203]: starting version 3.2.7
console: /bin/sh: can't access tty; job control turned off
console: cat /proc/partitions
console: / # cat /proc/partitions
console: major minor #blocks name
console: 1 0 4096 ram0
console: 1 1 4096 ram1
console: 1 2 4096 ram2
console: 1 3 4096 ram3
console: 179 0 61440 mmcblk0
console: reboot
console: / # reboot
console: umount: devtmpfs busy - remounted read-only
console: EXT4-fs (mmcblk0): re-mounted. Opts: (null)
console: The system is going down NOW!
console: Sent SIGTERM to all processes
console: Sent SIGKILL to all processes
console: Requesting system reboot
console: reboot: Restarting system
JOB TIME : 68.64 s
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-16-nieklinnenbank@gmail.com
[NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()]
[NL: extend test with ethernet device checks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test boots a Linux kernel on a OrangePi PC board and verify
the serial output is working.
The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://www.armbian.com/orange-pi-pc/
The cpio image used comes from the linux-build-test project:
https://github.com/groeck/linux-build-test
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
Alternatively, this test can be run using:
$ avocado --show=console run -t machine:orangepi-pc tests/acceptance/boot_linux_console.py
console: Uncompressing Linux... done, booting the kernel.
console: Booting Linux on physical CPU 0x0
console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d
console: CPU: div instructions available: patching division code
console: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
console: OF: fdt: Machine model: Xunlong Orange Pi PC
[...]
console: Trying to unpack rootfs image as initramfs...
console: Freeing initrd memory: 3256K
console: Freeing unused kernel memory: 1024K
console: Run /init as init process
console: mount: mounting devtmpfs on /dev failed: Device or resource busy
console: Starting logging: OK
console: Initializing random number generator... random: dd: uninitialized urandom read (512 bytes read)
console: done.
console: Starting network: OK
console: Found console ttyS0
console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
console: Boot successful.
console: cat /proc/cpuinfo
console: / # cat /proc/cpuinfo
console: processor : 0
console: model name : ARMv7 Processor rev 5 (v7l)
console: BogoMIPS : 125.00
console: Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
console: CPU implementer : 0x41
console: CPU architecture: 7
console: CPU variant : 0x0
console: CPU part : 0xc07
console: CPU revision : 5
[...]
console: processor : 3
console: model name : ARMv7 Processor rev 5 (v7l)
console: BogoMIPS : 125.00
console: Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
console: CPU implementer : 0x41
console: CPU architecture: 7
console: CPU variant : 0x0
console: CPU part : 0xc07
console: CPU revision : 5
console: Hardware : Allwinner sun8i Family
console: Revision : 0000
console: Serial : 0000000000000000
console: cat /proc/iomem
console: / # cat /proc/iomem
console: 01000000-010fffff : clock@1000000
console: 01c00000-01c00fff : system-control@1c00000
console: 01c02000-01c02fff : dma-controller@1c02000
[...]
console: reboot
console: / # reboot
console: / # Found console ttyS0
console: Stopping network: OK
console: hrtimer: interrupt took 21852064 ns
console: Saving random seed... random: dd: uninitialized urandom read (512 bytes read)
console: done.
console: Stopping logging: OK
console: umount: devtmpfs busy - remounted read-only
console: umount: can't unmount /: Invalid argument
console: The system is going down NOW!
console: Sent SIGTERM to all processes
console: Sent SIGKILL to all processes
console: Requesting system reboot
console: reboot: Restarting system
PASS (48.32 s)
JOB TIME : 49.16 s
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-15-nieklinnenbank@gmail.com
[NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test boots a Linux kernel on a OrangePi PC board and verify
the serial output is working.
The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://www.armbian.com/orange-pi-pc/
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
Alternatively, this test can be run using:
$ make check-venv
$ ./tests/venv/bin/avocado --show=console,app run -t machine:orangepi-pc tests/acceptance/boot_linux_console.py
JOB ID : 2e4d15eceb13c33672af406f08171e6e9de1414a
JOB LOG : ~/job-results/job-2019-12-17T05.46-2e4d15e/job.log
(1/1) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi:
console: Uncompressing Linux... done, booting the kernel.
console: Booting Linux on physical CPU 0x0
console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d
console: CPU: div instructions available: patching division code
console: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
console: OF: fdt: Machine model: Xunlong Orange Pi PC
console: Memory policy: Data cache writealloc
console: OF: reserved mem: failed to allocate memory for node 'cma@4a000000'
console: cma: Failed to reserve 128 MiB
console: psci: probing for conduit method from DT.
console: psci: PSCIv0.2 detected in firmware.
console: psci: Using standard PSCI v0.2 function IDs
console: psci: Trusted OS migration not required
console: random: get_random_bytes called from start_kernel+0x8d/0x3c2 with crng_init=0
console: percpu: Embedded 18 pages/cpu @(ptrval) s41228 r8192 d24308 u73728
console: Built 1 zonelists, mobility grouping on. Total pages: 32480
console: Kernel command line: printk.time=0 console=ttyS0,115200
PASS (8.59 s)
JOB TIME : 8.81 s
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200311221854.30370-14-nieklinnenbank@gmail.com
[NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The dbus-vmstate-test has been failing in some Patchew configs
since about the 6th March:
dbus-daemon[9321]: Could not get password database information for UID of current process: User "???" unknown or no memory to allocate password entry
**
ERROR:/tmp/qemu-test/src/tests/qtest/dbus-vmstate-test.c:114:get_connection: assertion failed (err == NULL): The connection is closed (g-io-error-quark, 18)
cleaning up pid 9321
ERROR - Bail out! ERROR:/tmp/qemu-test/src/tests/qtest/dbus-vmstate-test.c:114:get_connection: assertion failed (err == NULL): The connection is closed (g-io-error-quark, 18)
make: *** [/tmp/qemu-test/src/tests/Makefile.include:632: check-qtest-x86_64] Error 1
make: *** Waiting for unfinished jobs....
It's not clear why this is happening (perhaps a recently revealed
race condition or a change in the patchew build environment?).
For the moment, disable this test so that patchew test runs are
useful and don't email the list with spurious failure mails.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200310152141.13959-1-peter.maydell@linaro.org
This patch adds a new test file to exercise the case where
qemu-img fails to complete for the LUKS format when a non-UTF8
secret is used.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200130213907.2830642-5-danielhb413@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The socket_scm_helper path got corrupted during the mechanical
refactor moving the qtests files into their own sub-directory.
Fixes: 1e8a1fae7 ("test: Move qtests to a separate directory")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200306165751.18986-1-philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds test cases for attaching the backing chain to a mirror
job target right before finalising the job, where the image is in a
non-mainloop AioContext (i.e. the backing chain needs to be moved to the
AioContext of the mirror target).
This requires switching the test case from virtio-blk to virtio-scsi
because virtio-blk only actually starts using the iothreads when the
guest driver initialises the device (which never happens in a test case
without a guest OS). virtio-scsi always keeps its block nodes in the
AioContext of the the requested iothread without guest interaction.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-7-kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The newly tested scenario is a common live storage migration scenario:
The target node is opened without a backing file so that the active
layer is mirrored while its backing chain can be copied in the
background.
The backing chain should be attached to the mirror target node when
finalising the job, just before switching the users of the source node
to the new copy (at which point the mirror job still has a reference to
the node). drive-mirror did this automatically, but with blockdev-mirror
this is the job of the QMP client.
This patch adds test cases for two ways to achieve the desired result,
using either x-blockdev-reopen or blockdev-snapshot.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-5-kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'job-complete' QMP command should be run with qmp() rather than
qmp_log() if use_log=False is passed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-4-kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockdev-snapshot returned an error if the overlay was already in use,
which it defined as having any BlockBackend parent. This is in fact both
too strict (some parents can tolerate the change of visible data caused
by attaching a backing file) and too loose (some non-BlockBackend
parents may not be happy with it).
One important use case that is prevented by the too strict check is live
storage migration with blockdev-mirror. Here, the target node is
usually opened without a backing file so that the active layer is
mirrored while its backing chain can be copied in the background.
The backing chain should be attached to the mirror target node when
finalising the job, just before switching the users of the source node
to the new copy (at which point the mirror job still has a reference to
the node). drive-mirror did this automatically, but with blockdev-mirror
this is the job of the QMP client, so it needs a way to do this.
blockdev-snapshot is the obvious way, so this patch makes it work in
this scenario. The new condition is that no parent uses CONSISTENT_READ
permissions. This will ensure that the operation will still be blocked
when the node is attached to the guest device, so blockdev-snapshot
remains safe.
(For the sake of completeness, x-blockdev-reopen can be used to achieve
the same, however it is a big hammer, performs the graph change
completely unchecked and is still experimental. So even with the option
of using x-blockdev-reopen, there are reasons why blockdev-snapshot
should be able to perform this operation.)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-3-kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tests 261 and 272 fail on RHEL 7 with coreutils 8.22, since od
--endian was not added until coreutils 8.23. Fix this by manually
constructing the final value one byte at a time.
Fixes: fc8ba423
Reported-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200226125424.481840-1-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This test exercises the block/crypto.c "luks" block driver
.bdrv_measure() code.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200221112522.1497712-5-stefanha@redhat.com>
[mreitz: Renamed test from 282 to 288]
Signed-off-by: Max Reitz <mreitz@redhat.com>
In most qemu-img sub-commands the --object option only makes sense when
there is a filename. qemu-img measure is an exception because objects
may be referenced from the image creation options instead of an existing
image file. Allow --object without a filename.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200221112522.1497712-4-stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch allows bdrv_reopen() (and therefore the x-blockdev-reopen QMP
command) to attach a node as the new backing file even if the node is in
a different AioContext than the parent if one of both nodes can be moved
to the AioContext of the other node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <20200306141413.30705-3-kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We'll want to test more than one successful case in the future, so
prepare the test for that by a refactoring that runs each scenario in a
separate VM.
test_iothreads_switch_{backing,overlay} currently produce errors, but
these are cases that should actually work, by switching either the
backing file node or the overlay node to the AioContext of the other
node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <20200306141413.30705-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Trying to attach a HMP monitor to a chardev that is already in use
results in a crash because monitor_init_hmp() passes &error_abort to
qemu_chr_fe_init():
$ ./x86_64-softmmu/qemu-system-x86_64 --chardev stdio,id=foo --mon foo --mon foo
QEMU 4.2.50 monitor - type 'help' for more information
(qemu) Unexpected error in qemu_chr_fe_init() at chardev/char-fe.c:220:
qemu-system-x86_64: --mon foo: Device 'foo' is in use
Abgebrochen (Speicherabzug geschrieben)
Fix this by allowing monitor_init_hmp() to return an error and passing
any error in qemu_chr_fe_init() to its caller instead of aborting.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-19-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Trying to attach a QMP monitor to a chardev that is already in use
results in a crash because monitor_init_qmp() passes &error_abort to
qemu_chr_fe_init():
$ ./x86_64-softmmu/qemu-system-x86_64 --chardev stdio,id=foo --mon foo,mode=control --mon foo,mode=control
Unexpected error in qemu_chr_fe_init() at chardev/char-fe.c:220:
qemu-system-x86_64: --mon foo,mode=control: Device 'foo' is in use
Abgebrochen (Speicherabzug geschrieben)
Fix this by allowing monitor_init_qmp() to return an error and passing
any error in qemu_chr_fe_init() to its caller instead of aborting.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-18-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test what happens when writing data to an external data file, where the
write requires an L2 entry to be allocated, but the data write fails.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200225143130.111267-4-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test what happens when writing data to a preallocated zero cluster, but
the data write fails.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200225143130.111267-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The counting code here should use the local variable n_nodes_local.
Otherwise, the variable n_nodes is counting incorrectly, causing the
counting logic of the code to be wrong.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20200207115433.118254-1-tianjia.zhang@linux.alibaba.com
Message-Id: <20200207115433.118254-1-tianjia.zhang@linux.alibaba.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200227031439.31386-3-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200227031439.31386-2-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAl5hNQEACgkQda1lgCoL
QhH7Egf/esr+B1d6kfD8bfy3byplFu3fnNTJRino2c6ElaRLXKG6kl1ODb7oQZ0g
37aVL+UVtVyTIkuTKT6Xx4xNq4TbrXB6hcNqoB/J9DaTVVYCLLQWrHRRmA8VrtLM
6H7hdmi7zPEOm6BDtDJzUyDmWsuZEwGcsToUixfMlG+rCbc3bC4rGQwVg2/t5Y55
LvP8SF6NngmL099ZtZbHsvaVxprZZ5fxx7NzjX6tW19TBg0PqtIV2Ro0VnCliaIN
L5xv5amlghIdBbkZKmc6hNERJ/U37lF3AxyY4dxCLn0waMN+DgYvfjr2ZSrB9PQ/
8yts/x5pIThCffvE0DSir2kQz8yUNg==
=MeFg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2020-03-04-2' into staging
Merge tpm 2020/03/04 v2
# gpg: Signature made Thu 05 Mar 2020 17:21:05 GMT
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2020-03-04-2:
test: tpm-tis: Add Sysbus TPM-TIS device test
test: tpm-tis: Get prepared to share tests between ISA and sysbus devices
test: tpm: pass optional machine options to swtpm test functions
docs/specs/tpm: Document TPM_TIS sysbus device for ARM
hw/arm/virt: vTPM support
tpm: Add the SysBus TPM TIS device
tpm: Separate TPM_TIS and TPM_TIS_ISA configs
tpm: Separate tpm_tis common functions from isa code
tpm: Use TPMState as a common struct
tpm: rename TPM_TIS into TPM_TIS_ISA
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The tests themselves are the same as the ISA device ones.
Only the main() changes as the "tpm-tis-device" device gets
instantiated. Also the base address of the device is not
0xFED40000 anymore but matches the base address of the
ARM virt platform bus.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200305165149.618-11-eric.auger@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
ISA and sysbus TPM-TIS devices will share their tests. Only
the main() will change (instantiation option is different).
Also the base address of the TPM-TIS device is going to be
different. on x86 it is located at 0xFED40000 while on ARM
it can be located at any location, discovered through the
device tree description.
So we put shared test functions in a new object module.
Each test needs to set tpm_tis_base_addr global variable.
Also take benefit of this move to fix "block comments using
a leading */ on a separate line" checkpatch warnings.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200305165149.618-10-eric.auger@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
We plan to use swtpm test functions on ARM for testing the
sysbus TPM-TIS device. However on ARM there is no default machine
type. So we need to explictly pass some machine options on startup.
Let's allow this by adding a new parameter to both swtpm test
functions and update all call sites.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200305165149.618-9-eric.auger@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Let's separate the compilation of tpm_tis_common.c from
the compilation of tpm_tis_isa.c
The common part will be also compiled along with the
tpm_tis_sysbus device.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 20200305165149.618-5-eric.auger@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
* Implement (trivially) ARMv8.2-TTCNP
* hw/arm/smmu-common: a fix to smmu_find_smmu_pcibus
* Remove unnecessary endianness-handling on some boards
* Avoid minor memory leaks from timer_new in some devices
* Honour more of the HCR_EL2 trap bits
* Complain rather than ignoring bad command line options for cubieboard
* Honour TBI for DC ZVA and exception return
-----BEGIN PGP SIGNATURE-----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=hT5f
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200305' into staging
* versal: Implement ADMA
* Implement (trivially) ARMv8.2-TTCNP
* hw/arm/smmu-common: a fix to smmu_find_smmu_pcibus
* Remove unnecessary endianness-handling on some boards
* Avoid minor memory leaks from timer_new in some devices
* Honour more of the HCR_EL2 trap bits
* Complain rather than ignoring bad command line options for cubieboard
* Honour TBI for DC ZVA and exception return
# gpg: Signature made Thu 05 Mar 2020 16:30:17 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20200305: (37 commits)
target/arm: Clean address for DC ZVA
target/arm: Use DEF_HELPER_FLAGS for helper_dc_zva
target/arm: Move helper_dc_zva to helper-a64.c
target/arm: Apply TBI to ESR_ELx in helper_exception_return
target/arm: Introduce core_to_aa64_mmu_idx
target/arm: Optimize cpu_mmu_index
target/arm: Replicate TBI/TBID bits for single range regimes
hw/arm/cubieboard: report error when using unsupported -bios argument
hw/arm/cubieboard: restrict allowed RAM size to 512MiB and 1GiB
hw/arm/cubieboard: restrict allowed CPU type to ARM Cortex-A8
hw/arm/cubieboard: use ARM Cortex-A8 as the default CPU in machine definition
tests/tcg/aarch64: Add newline in pauth-1 printf
target/arm: Honor the HCR_EL2.TTLB bit
target/arm: Honor the HCR_EL2.TPU bit
target/arm: Honor the HCR_EL2.TPCP bit
target/arm: Honor the HCR_EL2.TACR bit
target/arm: Honor the HCR_EL2.TSW bit
target/arm: Honor the HCR_EL2.{TVM,TRVM} bits
target/arm: Improve masking in arm_hcr_el2_eff
target/arm: Remove EL2 and EL3 setup from user-only
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make the output just a bit prettier when running by hand.
Cc: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-13-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200304155932.20452-3-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
If we want to use @skipUnless decorations on the class we need a
newer version of avocado.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200303150622.20133-9-alex.bennee@linaro.org>
This is used for some of the vm-build tests so lets detect it and
behave sanely when it is not installed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200303150622.20133-8-alex.bennee@linaro.org>
This method was located in both centos and ubuntu.i386.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219163537.22098-6-robert.foley@linaro.org>
Message-Id: <20200303150622.20133-6-alex.bennee@linaro.org>
Allow wait_ssh to wait for root user to be ready.
This solves the issue where we perform a wait_ssh()
successfully, but the root user is not yet ready
to be logged in.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200219163537.22098-5-robert.foley@linaro.org>
Message-Id: <20200303150622.20133-5-alex.bennee@linaro.org>
Add change to increase timeout waiting for VM to boot.
Needed for some emulation cases where it can take longer
than 5 minutes to boot.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200219163537.22098-4-robert.foley@linaro.org>
Message-Id: <20200303150622.20133-4-alex.bennee@linaro.org>
Add changes to tests/vm/basevm.py so that during debug mode we show ssh output.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219163537.22098-3-robert.foley@linaro.org>
Message-Id: <20200303150622.20133-3-alex.bennee@linaro.org>
Change Makefile.include to use $(PYTHON) so for vm-boot-ssh to be
consistent with other cases like vm-build.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219163537.22098-2-robert.foley@linaro.org>
Message-Id: <20200303150622.20133-2-alex.bennee@linaro.org>
This simulates the case that happens when we resume COLO after failover.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add a test that verifies the Tux logo is displayed on the framebuffer.
We simply follow the OpenCV "Template Matching with Multiple Objects"
tutorial, replacing Lionel Messi by Tux:
https://docs.opencv.org/4.2.0/d4/dc6/tutorial_py_template_matching.html
When OpenCV and NumPy are installed, this test can be run using:
$ AVOCADO_ALLOW_UNTRUSTED_CODE=hmmm \
avocado --show=app,framebuffer run -t device:framebuffer \
tests/acceptance/machine_arm_integratorcp.py
JOB ID : 8c46b0f8269242e87d738247883ea2a470df949e
JOB LOG : avocado/job-results/job-2020-01-31T21.38-8c46b0f/job.log
(1/1) tests/acceptance/machine_arm_integratorcp.py:IntegratorMachine.test_framebuffer_tux_logo:
framebuffer: found Tux at position [x, y] = (0, 0)
PASS (3.96 s)
RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 4.23 s
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20200225172501.29609-5-philmd@redhat.com
Message-Id: <20200131211102.29612-3-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As we want to re-use this code, extract it as a new function.
Since we are using the PL011 serial console, add a Avocado tag
to ease filtering of tests.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200225172501.29609-4-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a kernel and initrd available on github which we can use
for testing this machine.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200225172501.29609-3-philmd@redhat.com
Message-Id: <20200131170233.14584-1-thuth@redhat.com>
[PMD: Renamed test method, moved description from class to method]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Old kernels from the Meego project can be used to check that Linux
is at least starting on these machines.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200225172501.29609-2-philmd@redhat.com
Message-Id: <20200129131920.22302-1-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
