Methods with no self-use should belong to the class.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Don't use 'qmp' here, which shadows the qmp module.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
It needs to match the parent's signature -- the negotiate parameter must
be optional.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The signatures need to match.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
A lot of fiddling around to get us below 80 columns.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add a little forwarder shim until we are sure that everyone is
comfortable with how to use the tools in their new packaged location.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210604155532.1499282-12-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The script itself will be unavailable for a few commits before being
restored, with no way to run it right after this commit. This helps move
git history into the new file. To prevent linter regressions, though, we
do need to immediately touch up the filename to remove dashes (to make
the module importable), and remove the executable bit.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210604155532.1499282-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This script is in slightly rough shape, but it still works. A lot of
care went into its initial development. In good faith, I'm updating it
to the latest Python coding standards. If there is in interest in this
script, though, I'll be asking for a contributor to take care of it
further.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210604155532.1499282-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
I'm only doing a very quick best-effort to preserve this script, to help
keep it from breaking further. I think there are pending ideas swirling
on the right way to implement better SDKs and better clients, and this
script might be a handy reference for those discussions. It presents
some interesting design problems, like static type safety when using a
dynamic RPC mechanism.
I believe it's worth preserving the effort and care that went into
making this script by updating it to work with our current
infrastructure. However, I am disabling the requirement for docstrings
in this file.
If you would like to help improve this script, please add docstrings
alongside any refactors or rejuvenations you might apply at that time.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210604155532.1499282-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Turn that nice usage comment into a docstring.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210604155532.1499282-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
optparse isn't supported anymore, it's from the python2 days. Replace it
with the mostly similar argparse.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210604155532.1499282-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Fixes: 50d189c
These error classes aren't available anymore. Fix the bitrot.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210604155532.1499282-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
- Line length should be < 80
- You shouldn't perform unscoped imports except at the top of the module
Notably, the sys.path hack creates problems with the import rule. This
will be fixed later.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210604155532.1499282-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
By leaving the script absent for a commit, git-blame travels to the new
file instead of staying on the shim.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-19-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Move qom-fuse over to the python package now that it passes the
linter. Update the import paradigms so that it continues to pass in the
context of the Python package.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-18-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Because fusepy does not have type hints, add some targeted warning
suppressions.
Namely, we need to allow subclassing something of an unknown type (in
qom_fuse.py), and we need to allow missing imports (recorded against
fuse itself) because mypy will be unable to import fusepy (even when
installed) as it has no types nor type stubs available.
Note: Until now, it was possible to run invocations like 'mypy qemu/'
from ./python and have that work. However, these targeted suppressions
require that you run 'mypy -p qemu/' instead. The correct, canonical
invocation is recorded in ./python/tests/mypy.sh and all of the various
CI invocations always use this correct form.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-16-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
- Use FuseOSError to signal ENOENT instead of returning it
- Wrap qom-get in str(), as we don't always know its type
- The empty return should be b'', not ''.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-15-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
the qom_list method provides a type-safe object that's easier to type
check, so switch to using it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-14-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Move qom-fuse onto the QOMCommand base established in
python/qemu/qmp/qom_common.py. The interface doesn't change
incompatibly, "qom-fuse mountpoint" still works as an invocation, and
QMP_SOCKET is still used as the environment variable.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-13-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The methods inherited from fuse don't need docstrings; that's up to
fusepy to handle.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-12-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
- Catch specific exceptions from QMP
- Reraise errors with explicit context
- method parameters should match parent's names
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
flake8 still has one warning because of the sys.path hack, but that will
be going away by the end of this patch series.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Hint: you can use symlinks to create qom_fuse.py in python/qemu/qmp/ and
point to scripts/qom-fuse to apply the standard linting rules to this
script.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Redirect to the new qom scripts. These forwarders can be deleted
eventually when there has been more time for the dust on the Python
packaging to settle and people understand how to find these commands.
Note: You can run these by setting $PYTHONPATH in your shell and then
running "python3 -m qemu.qmp.qom", or you can install the qemu namespace
package and use the "qom" or "qom-set" scripts.
I've written how to install the package elsewhere, but for the sake of
git-blame, cd to ./python, and then do:
- pip3 install [--user] [-e] .
--user will install to your local user install (will not work inside of
a venv), omitting this flag installs to your system-wide packages
(outside of a venv) or to your current virtual environment (inside the
venv).
When installing to a venv or to your system-wide packages, "qom"
should be in your $PATH already. If you do a user install, you may
need to add ~/.local/bin to your $PATH if you haven't already.
-e installs in editable mode: the installed package is effectively just
a symlink to this folder; so changes to your git working tree are
reflected in the installed package.
Note: installing these packages to an environment outside a venv can be
dangerous: Many QEMU scripts will begin to prefer the installed version
instead of the version directly in the tree. Use with caution. editable
mode is recommended when working outside of a venv.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This takes the place of qmp-shell's __get_address function. It also
allows other utilities to share the same parser and syntax for
specifying QMP locations.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"foo" or "nofoo".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-8-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This script has not seen a patch that was specifically for this script
since it was moved to this location in 2013, and I doubt it is used. It
uses "man qmp" for its help message, which does not exist. It also
presumes there is a manual page for qmp-XXX, for each defined qmp
command XXX. I don't think that's true.
The format it expects arguments in is something like:
block-dirty-bitmap-add --node=foo --name=bar
and has no capacity to support nested JSON arguments, either.
Most developers use either qmp-shell or socat (or pasting JSON directly
into qmp stdio), so this duplication and additional alternate syntax is
not helpful.
Remove it. Leave a breadcrumb script just in case, to be removed next
release cycle.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20201019210430.1063390-1-jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
If the user selects pretty-printing (-p) the contents of any
dictionaries in the output are sorted by key.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20201013141414.18398-1-david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
path, prop = "type".rsplit('/', 1) sets path to "", which doesn't
work. Correct to "/".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200723142738.1868568-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200723142738.1868568-3-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Commit c7b942d7f8 "scripts/qmp: Fix shebang and imports" messed with
it for reasons I don't quite understand. I do understand how it fails
now: it neglects to import sys. Fix that.
It now fails because it expects an old version of module fuse. That's
next.
Fixes: c7b942d7f8
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200723142738.1868568-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
We guarantee 3.5+ everywhere; remove more dead checks. In general, try
to avoid using version checks and instead prefer to attempt behavior
when possible.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200514035230.25756-1-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
There's more wrong with these scripts; They are in various stages of
disrepair. That's beyond the scope of this current patchset.
This just mechanically corrects the imports and the shebangs, as part of
ensuring that the python/qemu/lib refactoring didn't break anything
needlessly.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20200528222129.23826-2-jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200512103238.7078-4-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This is only needed for Python 2, which we do not support anymore.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200204160604.19883-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use the program search path to find the Python 3 interpreter.
Patch created mechanically by running:
$ sed -i "s,^#\!/usr/bin/\(env\ \)\?python$,#\!/usr/bin/env python3," \
$(git grep -l 'if __name__.*__main__')
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200130163232.10446-6-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
python3 doesn't have raw_input(), so qmp-shell breaks.
Use input() instead and override it with raw_input()
if running on python2.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190620154035.30989-1-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This is a simple move of Python code that wraps common QEMU
functionality, and are used by a number of different tests
and scripts.
By treating that code as a real Python module, we can more easily:
* reuse code
* have a proper place for the module's own unittests
* apply a more consistent style
* generate documentation
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190206162901.19082-2-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Use shlex to split the CLI command, respecting quoted arguments, and
also comments. This allows to call for ex:
(QEMU) human-monitor-command command-line="screendump /dev/null"
{"execute": "human-monitor-command", "arguments": {"command-line": "screendump /dev/null"}}
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180326150916.9602-3-marcandre.lureau@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Since commit 068cf7a44c, qmp-shell
is broken:
$ ./scripts/qmp/qmp-shell
Traceback (most recent call last):
File "./scripts/qmp/qmp-shell", line 70, in <module>
from . import qmp
ValueError: Attempted relative import in non-package
Relative imports don't work on scripts that are executed
directly, so revert the change on the scripts inside scripts/qmp.
Fixes: 068cf7a44c
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180621175451.7948-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
