This allows us to remove more endian-specific defines from int_helper.c.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20190926204453.31837-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Now that the parameters to both set_dfp64() and set_dfp128() are exactly the
same, there is no need for an explicit if() statement to determine which
function should be called based upon size. Instead we can simply use the
preprocessor to generate the call to set_dfp##size() directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190926185801.11176-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Switch over all accesses to the decimal numbers held in struct PPC_DFP from
using HI_IDX and LO_IDX to using the VsrD() macro instead. Not only does this
allow the compiler to ensure that the various dfp_* functions are being passed
a ppc_vsr_t rather than an arbitrary uint64_t pointer, but also allows the
host endian-specific HI_IDX and LO_IDX to be completely removed from
dfp_helper.c.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190926185801.11176-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are several places in dfp_helper.c that access the decimal number
representations in struct PPC_DFP via HI_IDX and LO_IDX defines which are set
at the top of dfp_helper.c according to the host endian.
However we can instead switch to using ppc_vsr_t for decimal numbers and then
make subsequent use of the existing VsrD() macros to access the correct
element regardless of host endian. Note that 64-bit decimals are stored in the
LSB of ppc_vsr_t (equivalent to VsrD(1)).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190926185801.11176-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Most of the DFP helper functions call decimal{64,128}FromNumber() just before
returning in order to convert the decNumber stored in dfp.t64 back to a
Decimal{64,128} to write back to the FP registers.
Introduce new dfp_finalize_decimal{64,128}() helper functions which both enable
the parameter list to be reduced considerably, and also help minimise the
changes required in the next patch.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190926185801.11176-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since commit ef96e3ae96 "target/ppc: move FP and VMX registers into aligned vsr
register array" FP registers are no longer stored consecutively in memory and so
the current method of combining FP register pairs into DFP numbers is incorrect.
Firstly update the definition of the dh_*_fprp defines in helper.h to reflect
that FP registers are now stored as part of an array of ppc_vsr_t elements
rather than plain uint64_t elements, and then introduce a new ppc_fprp_t type
which conceptually represents a DFP even-odd register pair to be consumed by the
DFP helper functions.
Finally update the new DFP {get,set}_dfp{64,128}() helper functions to convert
between DFP numbers and DFP even-odd register pairs correctly, making use of the
existing VsrD() macro to access the correct elements regardless of host endian.
Fixes: ef96e3ae96 "target/ppc: move FP and VMX registers into aligned vsr register array"
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190926185801.11176-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The existing functions (now incorrectly) assume that the MSB and LSB of DFP
numbers are stored as consecutive 64-bit words in memory. Instead of accessing
the DFP numbers directly, introduce set_dfp{64,128}() helper functions to ease
the switch to the correct representation.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190926185801.11176-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The existing functions (now incorrectly) assume that the MSB and LSB of DFP
numbers are stored as consecutive 64-bit words in memory. Instead of accessing
the DFP numbers directly, introduce get_dfp{64,128}() helper functions to ease
the switch to the correct representation.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190926185801.11176-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On POWER8 systems the Directed Privileged Door-bell Exception State
register (DPDES) stores doorbell pending status, one bit per a thread
of a core, set by "msgsndp" instruction. The register is shared among
threads of the same core and KVM on POWER9 emulates it in a similar way
(POWER9 does not have DPDES).
DPDES is shared but QEMU assumes all SPRs are per thread so the only safe
way to write DPDES back to VCPU before running a guest is doing so
while all threads are pulled out of the guest so DPDES cannot change.
There is only one situation when this condition is met: incoming migration
when all threads are stopped. Otherwise any QEMU HMP/QMP command causing
kvm_arch_put_registers() (for example printing registers or dumping memory)
can clobber DPDES in a race with other vcpu threads.
This changes DPDES handling so it is not written to KVM at runtime.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20190923084110.34643-1-aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are FPSCR-related defines in target/ppc/cpu.h which can be used in
place of constants and explicit shifts which arguably improve the code a
bit in places.
Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
Message-Id: <1568817169-1721-1-git-send-email-pc@us.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ISA 3.0B added a set of Floating-Point Status and Control Register (FPSCR)
instructions: mffsce, mffscdrn, mffscdrni, mffscrn, mffscrni, mffsl.
This patch adds support for 'mffsce' instruction.
'mffsce' is identical to 'mffs', except that it also clears the exception
enable bits in the FPSCR.
On CPUs without support for 'mffsce' (below ISA 3.0), the
instruction will execute identically to 'mffs'.
Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1568817082-1384-1-git-send-email-pc@us.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ISA 3.0B added a set of Floating-Point Status and Control Register (FPSCR)
instructions: mffsce, mffscdrn, mffscdrni, mffscrn, mffscrni, mffsl.
This patch adds support for 'mffscrn' and 'mffscrni' instructions.
'mffscrn' and 'mffscrni' are similar to 'mffsl', except they do not return
the status bits (FI, FR, FPRF) and they also set the rounding mode in the
FPSCR.
On CPUs without support for 'mffscrn'/'mffscrni' (below ISA 3.0), the
instructions will execute identically to 'mffs'.
Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
Message-Id: <1568817081-1345-1-git-send-email-pc@us.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reorganize watchpoints out of i/o path.
Return host address from probe_write / probe_access.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAl1uiyYdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8AuwgAnYLQQbL8kjSqzp7q
gRlj0M2SX41ZW3fMkI794RwsljD9Z0QS7YGnpzHolig9XUYrGnip7STrMvlCr/1L
CIMWNHlgitgBMszLqg42/TB+6RxXn+DMX/ShUzTagC6xQhinCIpdEjoLaTKSgeP+
foIyJ2uoJLKOBP8cPTQp8evongtoQIljpsZZ0K8a4sreO1d6ytH+olkuoGiROft+
VoJkA+kNHd9cE+LPCva8UFGu1QE6uCySvhepzOpnvOtK+SXKUm2yLOFGu7RWP1pT
RkE0oRyRnImtg+cViHfUUFogIffFROdL5tuYMQVuqbINeROPUgJPav+R1Nz1P60a
xM2HEw==
=bLLU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190903' into staging
Allow page table bit to swap endianness.
Reorganize watchpoints out of i/o path.
Return host address from probe_write / probe_access.
# gpg: Signature made Tue 03 Sep 2019 16:47:50 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20190903: (36 commits)
tcg: Factor out probe_write() logic into probe_access()
tcg: Make probe_write() return a pointer to the host page
s390x/tcg: Pass a size to probe_write() in do_csst()
hppa/tcg: Call probe_write() also for CONFIG_USER_ONLY
mips/tcg: Call probe_write() for CONFIG_USER_ONLY as well
tcg: Enforce single page access in probe_write()
tcg: Factor out CONFIG_USER_ONLY probe_write() from s390x code
s390x/tcg: Fix length calculation in probe_write_access()
s390x/tcg: Use guest_addr_valid() instead of h2g_valid() in probe_write_access()
tcg: Check for watchpoints in probe_write()
cputlb: Handle watchpoints via TLB_WATCHPOINT
cputlb: Remove double-alignment in store_helper
cputlb: Fix size operand for tlb_fill on unaligned store
exec: Factor out cpu_watchpoint_address_matches
cputlb: Fold TLB_RECHECK into TLB_INVALID_MASK
exec: Factor out core logic of check_watchpoint()
exec: Move user-only watchpoint stubs inline
target/sparc: sun4u Invert Endian TTE bit
target/sparc: Add TLB entry with attributes
cputlb: Byte swap memory transaction attribute
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Preparation for collapsing the two byte swaps, adjust_endianness and
handle_bswap, along the I/O path.
Target dependant attributes are conditionalized upon NEED_CPU_H.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <81d9cd7d7f5aaadfa772d6c48ecee834e9cf7882.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The ibm,get_system_parameter rtas call is used by the guest to retrieve
data relating to certain parameters of the system. The SPLPAR
characteristics option (token 20) is used to determine characteristics of
the environment in which the lpar will run.
It may be useful for a guest to know the number of physical host threads
present on the underlying system where it is being run. Add the
characteristic "HostThrs" to the SPLPAR Characteristics
ibm,get_system_parameter rtas call to expose this information to a
guest. Add a n_host_threads property to the processor class which is
then used to retrieve this information and define it for POWER8 and
POWER9. Other processors will default to 0 and the charateristic won't
be added.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Message-Id: <20190827045751.22123-1-sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since I found this two instructions implemented with tcg, I refactored
them so they are consistent with other similar implementations that
I introduced in this patch.
Also, a new dual macro GEN_VXFORM_TRANS_DUAL is added. This macro is
used if one instruction is realized with direct translation, and second
one with a helper.
Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com>
Message-Id: <1566898663-25858-4-git-send-email-stefan.brankovic@rt-rk.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The underflow and inexact exceptions are not mutually exclusive.
Check for both of them. Tidy the reset of FPSCR[FI].
Fixes: https://bugs.launchpad.net/bugs/1841442
Reported-by: Paul Clarke <pc@us.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Paul Clarke <pc@us.ibm.com>
Message-Id: <20190826165434.18403-2-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As defined in Power 3.0 section 4.4.4 "Underflow Exception",
a tiny result is detected before rounding.
Fixes: https://bugs.launchpad.net/qemu/+bug/1841491
Reported-by: Paul Clarke <pc@us.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190827020013.27154-1-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The xscvdpspn instruction implements a non-arithmetic conversion.
In particular, NaNs are not silenced and rounding is not performed.
Rewrite to match the pseudocode for ConvertDPtoSP_NS() in the
Power 3.0B manual.
Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
Message-Id: <1566321964-1447-1-git-send-email-pc@us.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[dwg: Replaced description with clearer version from rth]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A class of instructions of the form:
op Target,A,B
which operate like:
Target = Target * A + B
have a bit set which distinguishes them from instructions that operate as:
Target = Target * B + A
This bit is not being checked properly (using PPC_BIT macro), so all
instructions in this class are operating incorrectly as the second form
above. The bit was being checked as if it were part of a 64-bit
instruction opcode, rather than a proper 32-bit opcode. Fix by using the
macro (PPC_BIT32) which treats the opcode as a 32-bit quantity.
Fixes: c9f4e4d8b6 ("target/ppc: improve VSX_FMADD with new GEN_VSX_HELPER_VSX_MADD macro")
Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
Message-Id: <1566401321-22419-1-git-send-email-pc@us.ibm.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
First ppc and spapr pull request for qemu-4.2. Includes:
* Some TCG emulation fixes and performance improvements
* Support for the mffsl instruction in TCG
* Added missing DPDES SPR
* Some enhancements to the emulation of the XIVE interrupt
controller
* Cleanups to spapr MSI management
* Some new suspend/resume infrastructure and a draft suspend
implementation for spapr
* New spapr hypercall for TPM communication (will be needed for
secure guests under an Ultravisor)
* Fix several memory leaks
And a few other assorted fixes.
-----BEGIN PGP SIGNATURE-----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=E+7d
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.2-20190821' into staging
ppc patch queue for 2019-08-21
First ppc and spapr pull request for qemu-4.2. Includes:
* Some TCG emulation fixes and performance improvements
* Support for the mffsl instruction in TCG
* Added missing DPDES SPR
* Some enhancements to the emulation of the XIVE interrupt
controller
* Cleanups to spapr MSI management
* Some new suspend/resume infrastructure and a draft suspend
implementation for spapr
* New spapr hypercall for TPM communication (will be needed for
secure guests under an Ultravisor)
* Fix several memory leaks
And a few other assorted fixes.
# gpg: Signature made Wed 21 Aug 2019 08:24:44 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.2-20190821: (42 commits)
ppc: Fix emulated single to double denormalized conversions
ppc: Fix emulated INFINITY and NAN conversions
ppc: conform to processor User's Manual for xscvdpspn
ppc: Add support for 'mffsl' instruction
target/ppc: Add Directed Privileged Door-bell Exception State (DPDES) SPR
spapr/xive: Mask the EAS when allocating an IRQ
spapr: Implement better workaround in spapr-vty device
spapr/irq: Drop spapr_irq_msi_reset()
spapr/pci: Free MSIs during reset
spapr/pci: Consolidate de-allocation of MSIs
ppc: remove idle_timer logic
spapr: Implement ibm,suspend-me
i386: use machine class ->wakeup method
machine: Add wakeup method to MachineClass
ppc/xive: Improve 'info pic' support
ppc/xive: Provide silent escalation support
ppc/xive: Provide unconditional escalation support
ppc/xive: Provide escalation support
ppc/xive: Provide backlog support
ppc/xive: Implement TM_PULL_OS_CTX special command
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709152053.16670-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h
in comments replaced]
GCC9 is confused by this comment when building with CFLAG
-Wimplicit-fallthrough=2:
target/ppc/mmu_helper.c: In function ‘dump_mmu’:
target/ppc/mmu_helper.c:1349:12: error: this statement may fall through [-Werror=implicit-fallthrough=]
1349 | if (ppc64_v3_radix(env_archcpu(env))) {
| ^
target/ppc/mmu_helper.c:1356:5: note: here
1356 | default:
| ^~~~~~~
cc1: all warnings being treated as errors
Rewrite the comment using 'fall through' which is recognized by
GCC and static analyzers.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190719131425.10835-6-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
helper_todouble() was not properly converting any denormalized 32 bit
float to 64 bit double.
Fix-suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
v2:
- Splitting patch "ppc: Three floating point fixes"; this is just one part.
- Original suggested "fix" was likely flawed. v2 is rewritten by
Richard Henderson (Thanks, Richard!); I reformatted the comments in a
couple of places, compiled, and tested.
Message-Id: <1566250936-14538-1-git-send-email-pc@us.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
helper_todouble() was not properly converting INFINITY from 32 bit
float to 64 bit double.
(Normalized operand conversion is unchanged, other than indentation.)
Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
Message-Id: <1566242388-9244-1-git-send-email-pc@us.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The POWER8 and POWER9 User's Manuals specify the implementation
behavior for what the ISA leaves "undefined" behavior for the
xscvdpspn and xscvdpsp instructions. This patch corrects the QEMU
implementation to match the hardware implementation for that case.
ISA 3.0B has xscvdpspn leaving its result in word 0 of the target register,
with the other words of the target register left "undefined".
The User's Manuals specify:
VSX scalar convert from double-precision to single-precision (xscvdpsp,
xscvdpspn).
VSR[32:63] is set to VSR[0:31].
So, words 0 and 1 both contain the result.
Note: this is important because GCC as of version 8 or so, assumes and takes
advantage of this behavior to optimize the following sequence:
xscvdpspn vs0,vs1
mffprwz r8,f0
ISA 3.0B has xscvdpspn leaving its result in word 0 of the target register,
and mffprwz expecting its input to come from word 1 of the source register.
This sequence fails with QEMU, as a shift is required between those two
instructions. However, since the hardware splats the result to both words 0
and 1 of its output register, the shift is not necessary.
Expect a future revision of the ISA to specify this behavior.
Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
v2
- Splitting patch "ppc: Three floating point fixes"; this is just one part.
- Updated commit message to clarify behavior is documented in User's Manuals.
- Updated commit message to correct which words are in output and source of
xscvdpspn and mffprz.
- No source changes to this part of the original patch.
Message-Id: <1566236601-22954-1-git-send-email-pc@us.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ISA 3.0B added a set of Floating-Point Status and Control Register (FPSCR)
instructions: mffsce, mffscdrn, mffscdrni, mffscrn, mffscrni, mffsl.
This patch adds support for 'mffsl'.
'mffsl' is identical to 'mffs', except it only returns mode, status, and enable
bits from the FPSCR.
On CPUs without support for 'mffsl' (below ISA 3.0), the 'mffsl' instruction
will execute identically to 'mffs'.
Note: I renamed FPSCR_RN to FPSCR_RN0 so I could create an FPSCR_RN mask which
is both bits of the FPSCR rounding mode, as defined in the ISA.
I also fixed a typo in the definition of FPSCR_FR.
Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
v4:
- nit: added some braces to resolve a checkpatch complaint.
v3:
- Changed tcg_gen_and_i64 to tcg_gen_andi_i64, eliminating the need for a
temporary, per review from Richard Henderson.
v2:
- I found that I copied too much of the 'mffs' implementation.
The 'Rc' condition code bits are not needed for 'mffsl'. Removed.
- I now free the (renamed) 'tmask' temporary.
- I now bail early for older ISA to the original 'mffs' implementation.
Message-Id: <1565982203-11048-1-git-send-email-pc@us.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
DPDES stores a status of a doorbell message and if it is lost in
migration, the destination CPU won't receive it. This does not hit us
much as IPIs complete too quick to catch a pending one and even if
we missed one, broadcasts happen often enough to wake that CPU.
This defines DPDES and registers with KVM for migration.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20190816061733.53572-1-aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The logic is broken for multiple vcpu guests, also causing memory leak.
The logic is in place to handle kvm not having KVM_CAP_PPC_IRQ_LEVEL,
which is part of the kernel now since 2.6.37. Instead of fixing the
leak, drop the redundant logic which is not excercised on new kernels
anymore. Exit with error on older kernels.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Message-Id: <156406409479.19996.7606556689856621111.stgit@lep8c.aus.stglabs.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Implement cpu_exec_enter/exit on ppc which calls into new methods of
the same name in PPCVirtualHypervisorClass. These are used by spapr
to implement the splpar VPA dispatch counter initially.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20190718034214.14948-2-npiggin@gmail.com>
[dwg: Removed unnecessary CONFIG_USER_ONLY checks as suggested by gkurz]
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Optimize Altivec instruction vclzw (Vector Count Leading Zeros Word).
This instruction counts the number of leading zeros of each word element
in source register and places result in the appropriate word element of
destination register.
Counting is to be performed in four iterations of for loop(one for each
word elemnt of source register vB). Every iteration consists of loading
appropriate word element from source register, counting leading zeros
with tcg_gen_clzi_i32, and saving the result in appropriate word element
of destination register.
Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1563200574-11098-7-git-send-email-stefan.brankovic@rt-rk.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Optimize Altivec instruction vclzd (Vector Count Leading Zeros Doubleword).
This instruction counts the number of leading zeros of each doubleword element
in source register and places result in the appropriate doubleword element of
destination register.
Using tcg-s count leading zeros instruction two times(once for each
doubleword element of source register vB) and placing result in
appropriate doubleword element of destination register vD.
Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1563200574-11098-6-git-send-email-stefan.brankovic@rt-rk.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Optimize altivec instruction vgbbd (Vector Gather Bits by Bytes by Doubleword)
All ith bits (i in range 1 to 8) of each byte of doubleword element in
source register are concatenated and placed into ith byte of appropriate
doubleword element in destination register.
Following solution is done for both doubleword elements of source register
in parallel, in order to reduce the number of instructions needed(that's why
arrays are used):
First, both doubleword elements of source register vB are placed in
appropriate element of array avr. Bits are gathered in 2x8 iterations(2 for
loops). In first iteration bit 1 of byte 1, bit 2 of byte 2,... bit 8 of
byte 8 are in their final spots so avr[i], i={0,1} can be and-ed with
tcg_mask. For every following iteration, both avr[i] and tcg_mask variables
have to be shifted right for 7 and 8 places, respectively, in order to get
bit 1 of byte 2, bit 2 of byte 3.. bit 7 of byte 8 in their final spots so
shifted avr values(saved in tmp) can be and-ed with new value of tcg_mask...
After first 8 iteration(first loop), all the first bits are in their final
places, all second bits but second bit from eight byte are in their places...
only 1 eight bit from eight byte is in it's place). In second loop we do all
operations symmetrically, in order to get other half of bits in their final
spots. Results for first and second doubleword elements are saved in
result[0] and result[1] respectively. In the end those results are saved in
appropriate doubleword element of destination register vD.
Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1563200574-11098-5-git-send-email-stefan.brankovic@rt-rk.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The opcode decode tables aren't really part of the CPUPPCState but an
internal implementation detail for the translator. This can cause
problems with memcpy in cpu_copy as any table created during
ppc_cpu_realize get written over causing a memory leak. To avoid this
move the tables into PowerPCCPU which is better suited to hold
internal implementation details.
Attempts to fix: https://bugs.launchpad.net/qemu/+bug/1836558
Cc: 1836558@bugs.launchpad.net
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190716121352.302-1-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Optimization of altivec instructions vsl and vsr(Vector Shift Left/Rigt).
Perform shift operation (left and right respectively) on 128 bit value of
register vA by value specified in bits 125-127 of register vB. Lowest 3
bits in each byte element of register vB must be identical or result is
undefined.
For vsl instruction, the first step is bits 125-127 of register vB have
to be saved in variable sh. Then, the highest sh bits of the lower
doubleword element of register vA are saved in variable shifted,
in order not to lose those bits when shift operation is performed on
the lower doubleword element of register vA, which is the next
step. After shifting the lower doubleword element shift operation
is performed on higher doubleword element of vA, with replacement of
the lowest sh bits(that are now 0) with bits saved in shifted.
For vsr instruction, firstly, the bits 125-127 of register vB have
to be saved in variable sh. Then, the lowest sh bits of the higher
doubleword element of register vA are saved in variable shifted,
in odred not to lose those bits when the shift operation is
performed on the higher doubleword element of register vA, which is
the next step. After shifting higher doubleword element, shift operation
is performed on lower doubleword element of vA, with replacement of
highest sh bits(that are now 0) with bits saved in shifted.
Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1563200574-11098-3-git-send-email-stefan.brankovic@rt-rk.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Adding simple macro that is calling tcg implementation of appropriate
instruction if altivec support is active.
Optimization of altivec instruction lvsl (Load Vector for Shift Left).
Place bytes sh:sh+15 of value 0x00 || 0x01 || 0x02 || ... || 0x1E || 0x1F
in destination register. Sh is calculated by adding 2 source registers and
getting bits 60-63 of result.
First, the bits [28-31] are placed from EA to variable sh. After that,
the bytes are created in the following way:
sh:(sh+7) of X(from description) by multiplying sh with 0x0101010101010101
followed by addition of the result with 0x0001020304050607. Value obtained
is placed in higher doubleword element of vD.
(sh+8):(sh+15) by adding the result of previous multiplication with
0x08090a0b0c0d0e0f. Value obtained is placed in lower doubleword element
of vD.
Optimization of altivec instruction lvsr (Load Vector for Shift Right).
Place bytes 16-sh:31-sh of value 0x00 || 0x01 || 0x02 || ... || 0x1E ||
0x1F in destination register. Sh is calculated by adding 2 source
registers and getting bits 60-63 of result.
First, the bits [28-31] are placed from EA to variable sh. After that,
the bytes are created in the following way:
sh:(sh+7) of X(from description) by multiplying sh with 0x0101010101010101
followed by substraction of the result from 0x1011121314151617. Value
obtained is placed in higher doubleword element of vD.
(sh+8):(sh+15) by substracting the result of previous multiplication from
0x18191a1b1c1d1e1f. Value obtained is placed in lower doubleword element
of vD.
Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1563200574-11098-2-git-send-email-stefan.brankovic@rt-rk.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Re-read the timebase before migrate was ported from x86 commit:
6053a86fe7: kvmclock: reduce kvmclock difference on migration
The clock move makes the guest knows about the paused time between
the stop and migrate commands. This is an issue in an already-paused
VM because some side effects, like process stalls, could happen
after migration.
So, this patch checks the runstate of guest in the pre_save handler and
do not re-reads the timebase in case of paused state (cold migration).
Signed-off-by: Maxiwell S. Garcia <maxiwell@linux.ibm.com>
Message-Id: <20190711194702.26598-1-maxiwell@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Prior patch resets can_do_io flag at the TB entry. Therefore there is no
need in resetting this flag at the end of the block.
This patch removes redundant gen_io_end calls.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <156404429499.18669.13404064982854123855.stgit@pasha-Precision-3630-Tower>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@gmail.com>
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Almost a third of its inclusions are actually superfluous. Delete
them. Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.
hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it. The compiler is cool with that, but include it anyway.
This doesn't reduce actual use much, as it's still included into
widely included headers. The next commit will tackle that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
hw/boards.h pulls in almost 60 headers. The less we include it into
headers, the better. As a first step, drop superfluous inclusions,
and downgrade some more to what's actually needed. Gets rid of just
one inclusion into a header.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-23-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We declare incomplete struct VMStateDescription in a couple of places
so we don't have to include migration/vmstate.h for the typedef.
That's fine with me. However, the next commit will drop
migration/vmstate.h from a massive number of compiles. Move the
typedef to qemu/typedefs.h now, so I don't have to insert struct in
front of VMStateDescription all over the place then.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-15-armbru@redhat.com>
In my "build everything" tree, changing migration/qemu-file-types.h
triggers a recompile of some 2600 out of 6600 objects (not counting
tests and objects that don't depend on qemu/osdep.h).
The culprit is again hw/hw.h, which supposedly includes it for
convenience.
Include migration/qemu-file-types.h only where it's needed. Touching
it now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Move commands query-cpu-definitions, query-cpu-model-baseline,
query-cpu-model-comparison, and query-cpu-model-expansion with their
types from target.json to machine-target.json. Also move types
CpuModelInfo, CpuModelExpansionType, and CpuModelCompareResult from
misc.json there. Add machine-target.json to MAINTAINERS section
"Machine core".
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-13-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[Commit message typo fixed]
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-4-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Introduce a new GEN_VSX_HELPER_VSX_MADD macro for the generator function which
enables the source and destination registers to be decoded at translation time.
This enables the determination of a or m form to be made at translation time so
that a single helper function can now be used for both variants.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190616123751.781-16-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
