The code already tries to do some endianness handling here, but
currently fails badly:
- While it already swaps the data when logging errors / tracing, it fails
to byteswap the value before e.g. accessing entry->irte.present
- entry->irte.source_id is swapped with le32_to_cpu(), though this is
a 16-bit value
- The whole union is apparently supposed to be swapped via the 64-bit
data[2] array, but the struct is a mixture between 32 bit values
(the first 8 bytes) and 64 bit values (the second 8 bytes), so this
cannot work as expected.
Fix it by converting the struct to two proper 64-bit bitfields, and
by swapping the values only once for everybody right after reading
the data from memory.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230802135723.178083-3-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
After reading the guest memory with dma_memory_read(), we have
to make sure that we byteswap the little endian data to the host's
byte order.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230802135723.178083-2-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
When the vhost-user reconnect to the backend, the notifer should be
cleanup. Otherwise, the fd resource will be exhausted.
Fixes: f9a09ca3ea ("vhost: add support for configure interrupt")
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20230731121018.2856310-2-fengli@smartx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2224964
In migration with VF failover, Windows guest and ACPI hot
unplug we do not need to satisfy config requests, otherwise
the guest immediately detects the device and brings up its
driver. Many network VF's are stuck on the guest PCI bus after
the migration.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-Id: <20230728084049.191454-1-yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio_queue_packed_set_last_avail_idx() is used by vhost devices to set
the internal queue indices to what has been reported by the vhost
back-end through GET_VRING_BASE. For packed virtqueues, this
32-bit value is expected to contain both the device's internal avail and
used indices, as well as their respective wrap counters.
To get the used index, we shift the 32-bit value right by 16, and then
apply a mask of 0x7ffff. That seems to be a typo, because it should be
0x7fff; first of all, the virtio specification says that the maximum
queue size for packed virt queues is 2^15, so the indices cannot exceed
2^15 - 1 anyway, making 0x7fff the correct mask. Second, the mask
clearly is wrong from context, too, given that (A) `idx & 0x70000` must
be 0 at this point (`idx` is 32 bit and was shifted to the right by 16
already), (B) `idx & 0x8000` is the used_wrap_counter, so should not be
part of the used index, and (C) `vq->used_idx` is a `uint16_t`, so
cannot fit the 0x70000 part of the mask anyway.
This most likely never produced any guest-visible bugs, though, because
for a vhost device, qemu will probably not evaluate the used index
outside of virtio_queue_packed_get_last_avail_idx(), where we
reconstruct the 32-bit value from avail and used indices and their wrap
counters again. There, it does not matter whether the highest bit of
the used_idx is the used index wrap counter, because we put the wrap
counter exactly in that position anyway.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230721134945.26967-1-hreitz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20230721072820.75797-1-david.edmondson@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Expected change is that _ADR object is removed from
hostbridge descriptor in DSDT for PC and Q35 machines.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ACPI spec (since 2.0a) says
"
A device object must contain either an _HID object or
an _ADR object, but can contain both.
"
_ADR is used when device is attached to an ennumerable bus,
however hostbridge is not and uses dedicated _HID for
discovery, drop _ADR field.
It doesn't seem that having _ADR has a negative effects
OSes manage to tolerate that, but there is no point of
having it there. (only pc/q35 has it hostbridge description,
while others (microvm/arm) don't)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following change is expected on each PCI slot with enabled
ACPI PCI hotplug
- BSEL,
- ASUN
+ Zero,
+ Zero
}
+ Local0 [Zero] = BSEL /* \_SB_.PCI0.BSEL */
+ Local0 [One] = ASUN /* \_SB_.PCI0.S18_.ASUN */
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it seems that Windows is unable to handle variable references
making it choke up when accessing ASUN during _DSM call
when device is hotplugged (it lists package elements as DataAlias
but despite that later on it misbehaves) with following error
shown up in AMLI debugger (WS2012r2):
Store(ShiftLeft(One,Arg1="ASUN",) AMLI_ERROR(c0140008): Unexpected argument type
ValidateArgTypes: expected Arg1 to be type Integer (Type=String)
Similar outcome with WS2022.
Issue is not fatal but as result acpi-index/"PCI Label ID" property
is either not shown in device details page or shows incorrect value.
Fix it by doing assignment of BSEL/ASUN values to package
elements manually after package declaration.
Fix was tested with: WS2012r2, WS2022, RHEL9
Fixes: 467d099a29 (x86: acpi: _DSM: use Package to pass parameters)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The QEMU CI fails in virtio-scmi test occasionally. As reported by
Thomas Huth, this happens most likely when the system is loaded and it
fails with the following error:
qemu-system-aarch64: ../../devel/qemu/hw/pci/msix.c:659:
msix_unset_vector_notifiers: Assertion `dev->msix_vector_use_notifier && dev->msix_vector_release_notifier' failed.
../../devel/qemu/tests/qtest/libqtest.c:200: kill_qemu() detected QEMU death from signal 6 (Aborted) (core dumped)
As discovered by Fabiano Rosas, the cause is a duplicate invocation of
msix_unset_vector_notifiers via duplicate vu_scmi_stop calls:
msix_unset_vector_notifiers
virtio_pci_set_guest_notifiers
vu_scmi_stop
vu_scmi_disconnect
...
qemu_chr_write_buffer
msix_unset_vector_notifiers
virtio_pci_set_guest_notifiers
vu_scmi_stop
vu_scmi_set_status
...
qemu_cleanup
While vu_scmi_stop calls are protected by vhost_dev_is_started()
check, it's apparently not enough. vhost-user-blk and vhost-user-gpio
use an extra protection, see f5b22d06fb (vhost: recheck dev state in
the vhost_migration_log routine) for the motivation. Let's use the
same in vhost-user-scmi, which fixes the failure above.
Fixes: a5dab090e1 ("hw/virtio: Add boilerplate for vhost-user-scmi device")
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Message-Id: <20230720101037.2161450-1-mzamazal@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
At several locations we compute the granule from the config
page_size_mask using ctz() and then format it in traces using
BIT(). As the page_size_mask is 64b we should use ctz64 and
BIT_ULL() for formatting. We failed to be consistent.
Note the page_size_mask is garanteed to be non null. The spec
mandates the device to set at least one bit, so ctz64 cannot
return 64. This is garanteed by the fact the device
initializes the page_size_mask to qemu_target_page_mask()
and then the page_size_mask is further constrained by
virtio_iommu_set_page_size_mask() callback which can't
result in a new mask being null. So if Coverity complains
round those ctz64/BIT_ULL with CID 1517772 this is a false
positive
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Fixes: 94df5b2180 ("virtio-iommu: Fix 64kB host page size VFIO device assignment")
Message-Id: <20230718182136.40096-1-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
In build_cdat_table() we do:
*cdat_table = g_malloc0(sizeof(*cdat_table) * CXL_USP_CDAT_NUM_ENTRIES);
This is wrong because:
- cdat_table has type CDATSubHeader ***
- so *cdat_table has type CDATSubHeader **
- so the array we're allocating here should be items of type CDATSubHeader *
- but we pass sizeof(*cdat_table), which is sizeof(CDATSubHeader **),
implying that we're allocating an array of CDATSubHeader **
It happens that sizeof(CDATSubHeader **) == sizeof(CDATSubHeader *)
so nothing blows up, but this should be sizeof(**cdat_table).
Avoid this excessively hard-to-understand code by using
g_new0() instead, which will do the type checking for us.
While we're here, we can drop the useless check against failure,
as g_malloc0() and g_new0() never fail.
This fixes Coverity issue CID 1508120.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230718101327.1111374-1-peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In the virtio_iommu_handle_command() when a PROBE request is handled,
output_size takes a value greater than the tail size and on a subsequent
iteration we can get a stack out-of-band access. Initialize the
output_size on each iteration.
The issue was found with ASAN. Credits to:
Yiming Tao(Zhejiang University)
Gaoning Pan(Zhejiang University)
Fixes: 1733eebb9e ("virtio-iommu: Implement RESV_MEM probe request")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Mauro Matteo Cascella <mcascell@redhat.com>
Cc: qemu-stable@nongnu.org
Message-Id: <20230717162126.11693-1-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix for an fd leak in the blkio block driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmTLzf0ACgkQnKSrs4Gr
c8hoGQf+KjsuChyk8/aoDP4MMkNB1/X3nsazCd3GY3uE+DRK8ieiRJeT6chMIey/
sK3v/drkDmdjj30qbXGxjLVa5SNsP9N6pVoo8fnFJN7LmGBE/JLEYUYVNpHAKEzb
N7mgDBcTHZWKGwZsh109X5l3Cr6HR484m3qKI/49qlVuWJmp8/lDUbFJbp96I6g9
ki9W0itwOrdtebYyUDml8eE/yLOxOTWx5Q7Q+qwSiEUNCwyd7yOS1QHQbnCgKw3m
c0Qzch2Z3dT61YbMrF6j0H7M1dXXcbNFdYVeMHYYJRkeN+bz4fWcUC4HkrL6YWf5
GLIj5irTSnae4TevlYVZT+72v99QQQ==
=pQ96
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
Fix for an fd leak in the blkio block driver.
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmTLzf0ACgkQnKSrs4Gr
# c8hoGQf+KjsuChyk8/aoDP4MMkNB1/X3nsazCd3GY3uE+DRK8ieiRJeT6chMIey/
# sK3v/drkDmdjj30qbXGxjLVa5SNsP9N6pVoo8fnFJN7LmGBE/JLEYUYVNpHAKEzb
# N7mgDBcTHZWKGwZsh109X5l3Cr6HR484m3qKI/49qlVuWJmp8/lDUbFJbp96I6g9
# ki9W0itwOrdtebYyUDml8eE/yLOxOTWx5Q7Q+qwSiEUNCwyd7yOS1QHQbnCgKw3m
# c0Qzch2Z3dT61YbMrF6j0H7M1dXXcbNFdYVeMHYYJRkeN+bz4fWcUC4HkrL6YWf5
# GLIj5irTSnae4TevlYVZT+72v99QQQ==
# =pQ96
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 03 Aug 2023 08:55:41 AM PDT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
block/blkio: add more comments on the fd passing handling
block/blkio: close the fd when blkio_connect() fails
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As Hanna pointed out, it is not clear in the code why qemu_open()
can fail, and why blkio_set_int("fd") is not enough to discover
the `fd` property support.
Let's fix them by adding more details in the code comments.
Suggested-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230803082825.25293-3-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
libblkio drivers take ownership of `fd` only after a successful
blkio_connect(), so if it fails, we are still the owners.
Fixes: cad2ccc395 ("block/blkio: use qemu_open() to support fd passing for virtio-blk")
Suggested-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-id: 20230803082825.25293-2-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Fix a problem when compiling with Clang on Windows
-----BEGIN PGP SIGNATURE-----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=K5Qb
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-08-03' of https://gitlab.com/thuth/qemu into staging
* Fix timeout problems in the MSYS Gitlab CI jobs
* Fix a problem when compiling with Clang on Windows
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmTLijMRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbW+OQ/5ASeu4rx6jyE8JFqRtvP6NEZ+UgQMRoCg
# NEfmSd9Y+tFewyuhLY5Pf6yUJWEljrdXp5ST6FId759l6DZ6mzQu809v427nN4Sb
# CxcwRYtoT2eEU0zhJ5ShnCXsNCl7Yyco3elWWFL3kbw4X2ooeOPkkGqQ1Tdfym8m
# /C+KVvFqFq4pnLnqMi7StylWtjYh/rAIMOw4kBDc3xU67eZiAd17+Hn9/t3Kca39
# 99A1JW0LiR0U1ZkX7R/q8YbICUtBsrPww9HmqlX7BoNy2vzr6jgKqo1dkm5QkDfK
# ZEzvS1nssb3iiavIJbO7entWMcryzAiu6LF5imbI4e5T5uwerd3RVoHCsem2mu7Q
# CUoCEYjCFYC7HTRLl80UKcbPC1tn6y6q+PGaFY0z2eJnaxHifbY0rVu3eKo/oJIb
# Ba1ltlxlXKIey6usJcEjG7ZEgYsyxtmX0KJQgjWaKvuMx2ElcEMg4J/eE57NEmW/
# srfTrUpSZwplnEX8C8wQeqmzoBvUmubLiO7Z9l8yqMHcqXxn95fybxPFGafpAziF
# hQ9Qs6YB81522V9JG6pt135vUXWA+L5UiptYc97PHZ66E2hZrfUrA1tm0lajcZI+
# GARvFLMfsNWIPPnS2iz8jMrkXtTc3xgTz2zEv2BL9s9sUH0+L6ggDY8DgbjITrjF
# hM4vUezCa7E=
# =K5Qb
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 03 Aug 2023 04:06:27 AM PDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-08-03' of https://gitlab.com/thuth/qemu:
gitlab: disable FF_SCRIPT_SECTIONS on msys jobs
gitlab: disable optimization and debug symbols in msys build
configure: support passthrough of -Dxxx args to meson
gitlab: always populate cache for windows msys jobs
gitlab: drop $CI_PROJECT_DIR from cache path
gitlab: always use updated msys installer
gitlab: print timestamps during windows msys jobs
gitlab: remove duplication between msys jobs
util/oslib-win32: Fix compiling with Clang from MSYS2
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The FF_SCRIPT_SECTIONS=1 variable should ordinarily cause output from
each line of the job script to be presented in a collapsible section
with execution time listed.
While it works on Linux shared runners, when used with Windows runners
with PowerShell, this option does not create any sections, and actually
causes echo'ing of commands to be disabled, making it even worse to
debug the jobs.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230801130403.164060-9-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Building at -O2, adds 33% to the build time, over -O2. IOW a build that
takes 45 minutes at -O0, takes 60 minutes at -O2. Turning off debug
symbols drops it further, down to 38 minutes.
IOW, a "-O2 -g" build is 58% slower than a "-O0" build on msys in the
gitlab CI windows shared runners.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230801130403.164060-8-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This can be useful for setting some meson global options, such as the
optimization level or debug state.xs
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230801130403.164060-7-berrange@redhat.com>
[thuth: Move the help text into the section with the other --... options]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The cache is used to hold the msys installer. Even if the build phase
fails, we should still populate the cache as the installer will be
valid for next time.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230801130403.164060-6-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The gitlab cache is limited to only handle content within the
$CI_PROJECT_DIR hierarchy, and as such relative paths are always
implicitly relative to $CI_PROJECT_DIR.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230801130403.164060-5-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We current reference an msys installer binary from mid-2022, which means
after installation, it immediately has to re-download a bunch of newer
content. This wastes precious CI time.
The msys project publishes an installer binary with a fixed URL that
always references the latest content. We cache the downloads in gitlab
though and so once downloaded we would never re-fetch the installer
leading back to the same problem.
To deal with this we also fetch the pgp signature for the installer
on every run, and compare that to the previously cached signature. If
the signature changes, we re-download the full installer.
This ensures we always have the latest installer for msys, while also
maximising use of the gitlab cache.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230801130403.164060-4-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It is hard to get visibility into where time is consumed in our Windows
msys jobs. Adding a few log console messages with the timestamp will
aid in our debugging.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230801130403.164060-3-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Although they share a common parent, the two msys jobs still have
massive duplication in their script definitions that can easily be
collapsed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230801130403.164060-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Clang complains:
../util/oslib-win32.c:483:56: error: omitting the parameter name in a
function definition is a C2x extension [-Werror,-Wc2x-extensions]
win32_close_exception_handler(struct _EXCEPTION_RECORD*,
^
Fix it by adding parameter names.
Message-Id: <20230728142748.305341-4-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
I've built interests in dirty limit and dirty page rate
features and also have been working on projects related
to this subsystem.
Add a section to the MAINTAINERS file for migration
dirty limit and dirty page rate.
Add myself as a maintainer for this subsystem so that I
can help to improve the dirty limit algorithm and review
the patches about dirty page rate.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Acked-by: Peter Xu <peterx@redhat.com>
Message-ID: <169073570563.19893.2928364761104733482-3@git.sr.ht>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reformat the dirty-limit migration doc comments to conform
to current conventions as commit a937b6aa73 (qapi: Reformat
doc comments to conform to current conventions).
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Message-ID: <169073570563.19893.2928364761104733482-1@git.sr.ht>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Whitespace tidied up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The arguments for deposit64 are (value, start, length, fieldval); this
appears to have thought they were (value, fieldval, start,
length). Reorder the parameters to match the actual function.
Cc: qemu-stable@nongnu.org
Fixes: 950272506d ("target/m68k: Use semihosting/syscalls.h")
Reported-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230801154519.3505531-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The arguments for deposit64 are (value, start, length, fieldval); this
appears to have thought they were (value, fieldval, start,
length). Reorder the parameters to match the actual function.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Fixes: d1e23cbaa4 ("target/nios2: Use semihosting/syscalls.h")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230731235245.295513-1-keithp@keithp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Instead of using R_ARG0 (the semihost function number), use R_ARG1
(the provided exit status).
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230801152245.332749-1-keithp@keithp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
A build of GCC 13.2 will have stack protector enabled by default if it
was configured with --enable-default-ssp option. For such a compiler,
it is necessary to explicitly disable stack protector when linking
without standard libraries.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230731091042.139159-2-akihiko.odaki@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230730180329.851576-1-sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Fuzzing showed that a guest could bind an interdomain port to itself, by
guessing the next port to be allocated and putting that as the 'remote'
port number. By chance, that works because the newly-allocated port has
type EVTCHNSTAT_unbound. It shouldn't.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20230801175747.145906-4-dwmw2@infradead.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Coverity points out (CID 1507534, 1507968) that we sometimes access
env->xen_singleshot_timer_ns under the protection of
env->xen_timers_lock and sometimes not.
This isn't always an issue. There are two modes for the timers; if the
kernel supports the EVTCHN_SEND capability then it handles all the timer
hypercalls and delivery internally, and all we use the field for is to
get/set the timer as part of the vCPU state via an ioctl(). If the
kernel doesn't have that support, then we do all the emulation within
qemu, and *those* are the code paths where we actually care about the
locking.
But it doesn't hurt to be a little bit more consistent and avoid having
to explain *why* it's OK.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20230801175747.145906-3-dwmw2@infradead.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Coverity points out (CID 1508128) a bounds checking error. We need to check
for gsi >= IOAPIC_NUM_PINS, not just greater-than.
Also fix up an assert() that has the same problem, that Coverity didn't see.
Fixes: 4f81baa33e ("hw/xen: Support GSI mapping to PIRQ")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230801175747.145906-2-dwmw2@infradead.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The TLS handshake make take some time to complete, during which time an
I/O watch might be registered with the main loop. If the owner of the
I/O channel invokes qio_channel_close() while the handshake is waiting
to continue the I/O watch must be removed. Failing to remove it will
later trigger the completion callback which the owner is not expecting
to receive. In the case of the VNC server, this results in a SEGV as
vnc_disconnect_start() tries to shutdown a client connection that is
already gone / NULL.
CVE-2023-3354
Reported-by: jiangyegen <jiangyegen@huawei.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
* fix an access to `request_cond` QemuCond in thread-pool
* fix issue with PCI devices when unplugging IDE devices in Xen guest
* several fixes for issues pointed out by Coverity
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE+AwAYwjiLP2KkueYDPVXL9f7Va8FAmTI0qcACgkQDPVXL9f7
Va9DVAgAlKGhkOhLiOtlwL05iI8/YiT7ekCSoMTWYO8iIyLCKGLVU5yyOAqYiAJD
dEgXNZOeulcLkn3LDCQYtZJmD42sUHv/xmdJ06zJ9jRvtLAJp5wuwaU9JFDhJPsG
eYPGBMdO39meUmgQe3X27CEKtht5Z8M9ZABdTLAxMyPANEzFmT7ni9wd/8Uc+tWg
BMsXQco8e1GSiBUjSky5nSW248FVDIyjkaYWk1poXEfm4gPQ0jf9gg/biEj44cSH
Tdz6de1kTwJfuYR+h+COQOrq0fUfz4SyVocKvtycZhKGXIqL74DiIGatxdVOwV9Y
NJ8g4oKDgDeMBZ66kXnTX4Y9nzhPpA==
=CdlZ
-----END PGP SIGNATURE-----
Merge tag 'pull-xen-20230801' of https://xenbits.xen.org/git-http/people/aperard/qemu-dm into staging
Misc fixes, for thread-pool, xen, and xen-emulate
* fix an access to `request_cond` QemuCond in thread-pool
* fix issue with PCI devices when unplugging IDE devices in Xen guest
* several fixes for issues pointed out by Coverity
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEE+AwAYwjiLP2KkueYDPVXL9f7Va8FAmTI0qcACgkQDPVXL9f7
# Va9DVAgAlKGhkOhLiOtlwL05iI8/YiT7ekCSoMTWYO8iIyLCKGLVU5yyOAqYiAJD
# dEgXNZOeulcLkn3LDCQYtZJmD42sUHv/xmdJ06zJ9jRvtLAJp5wuwaU9JFDhJPsG
# eYPGBMdO39meUmgQe3X27CEKtht5Z8M9ZABdTLAxMyPANEzFmT7ni9wd/8Uc+tWg
# BMsXQco8e1GSiBUjSky5nSW248FVDIyjkaYWk1poXEfm4gPQ0jf9gg/biEj44cSH
# Tdz6de1kTwJfuYR+h+COQOrq0fUfz4SyVocKvtycZhKGXIqL74DiIGatxdVOwV9Y
# NJ8g4oKDgDeMBZ66kXnTX4Y9nzhPpA==
# =CdlZ
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 01 Aug 2023 02:38:47 AM PDT
# gpg: using RSA key F80C006308E22CFD8A92E7980CF5572FD7FB55AF
# gpg: Good signature from "Anthony PERARD <anthony.perard@gmail.com>" [unknown]
# gpg: aka "Anthony PERARD <anthony.perard@citrix.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5379 2F71 024C 600F 778A 7161 D8D5 7199 DF83 42C8
# Subkey fingerprint: F80C 0063 08E2 2CFD 8A92 E798 0CF5 572F D7FB 55AF
* tag 'pull-xen-20230801' of https://xenbits.xen.org/git-http/people/aperard/qemu-dm:
xen-platform: do full PCI reset during unplug of IDE devices
xen: Don't pass MemoryListener around by value
thread-pool: signal "request_cond" while locked
xen-block: Avoid leaks on new error path
hw/xen: Clarify (lack of) error handling in transaction_commit()
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The IDE unplug function needs to reset the entire PCI device, to make
sure all state is initialized to defaults. This is done by calling
pci_device_reset, which resets not only the chip specific registers, but
also all PCI state. This fixes "unplug" in a Xen HVM domU with the
modular legacy xenlinux PV drivers.
Commit ee358e919e ("hw/ide/piix: Convert reset handler to
DeviceReset") changed the way how the the disks are unplugged. Prior
this commit the PCI device remained unchanged. After this change,
piix_ide_reset is exercised after the "unplug" command, which was not
the case prior that commit. This function resets the command register.
As a result the ata_piix driver inside the domU will see a disabled PCI
device. The generic PCI code will reenable the PCI device. On the qemu
side, this runs pci_default_write_config/pci_update_mappings. Here a
changed address is returned by pci_bar_address, this is the address
which was truncated in piix_ide_reset. In case of a Xen HVM domU, the
address changes from 0xc120 to 0xc100. This truncation was a bug in
piix_ide_reset, which was fixed in commit 230dfd9257 ("hw/ide/piix:
properly initialize the BMIBA register"). If pci_xen_ide_unplug had used
pci_device_reset, the PCI registers would have been properly reset, and
commit ee358e919e would have not introduced a regression for this
specific domU environment.
While the unplug is supposed to hide the IDE disks, the changed BMIBA
address broke the UHCI device. In case the domU has an USB tablet
configured, to recive absolute pointer coordinates for the GUI, it will
cause a hang during device discovery of the partly discovered USB hid
device. Reading the USBSTS word size register will fail. The access ends
up in the QEMU piix-bmdma device, instead of the expected uhci device.
Here a byte size request is expected, and a value of ~0 is returned. As
a result the UCHI driver sees an error state in the register, and turns
off the UHCI controller.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20230720072950.20198-1-olaf@aepfle.de>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Coverity points out (CID 1513106, 1513107) that MemoryListener is a
192 byte struct which we are passing around by value. Switch to
passing a const pointer into xen_register_ioreq() and then to
xen_do_ioreq_register(). We can also make the file-scope
MemoryListener variables const, since nothing changes them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230718101057.1110979-1-peter.maydell@linaro.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>