zstd significantly reduces cluster compression time.
It provides better compression performance maintaining
the same level of the compression ratio in comparison with
zlib, which, at the moment, is the only compression
method available.
The performance test results:
Test compresses and decompresses qemu qcow2 image with just
installed rhel-7.6 guest.
Image cluster size: 64K. Image on disk size: 2.2G
The test was conducted with brd disk to reduce the influence
of disk subsystem to the test results.
The results is given in seconds.
compress cmd:
time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd]
src.img [zlib|zstd]_compressed.img
decompress cmd
time ./qemu-img convert -O qcow2
[zlib|zstd]_compressed.img uncompressed.img
compression decompression
zlib zstd zlib zstd
------------------------------------------------------------
real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %)
user 65.0 15.8 5.3 2.5
sys 3.3 0.2 2.0 2.0
Both ZLIB and ZSTD gave the same compression ratio: 1.57
compressed image size in both cases: 1.4G
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-4-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add feature 'deprecated' to the deprecated QMP commands, so their
deprecation becomes visible in output of query-qmp-schema. Looks like
this:
{"name": "query-cpus",
"ret-type": "[164]",
"meta-type": "command",
"arg-type": "0",
---> "features": ["deprecated"]}
Management applications could conceivably use this for static
checking.
The deprecated commands are change, cpu-add, migrate-set-cache-size,
migrate_set_downtime, migrate_set_speed, query-cpus, query-events,
query-migrate-cache-size.
The deprecated command arguments are block-commit arguments @base and
@top, and block_set_io_throttle, blockdev-change-medium,
blockdev-close-tray, blockdev-open-tray, eject argument @device.
The deprecated command results are query-cpus-fast result @arch,
query-block result @dirty-bitmaps, query-named-block-nodes result
@encryption_key_missing and result @dirty-bitmaps's member @status.
Same for query-block result @inserted, which mirrors
query-named-block-nodes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200317115459.31821-27-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Anounce that 'blockdev-snapshot' command's permissions allow changing
of the backing file if the 'consistent_read' permission is not required.
This is useful for libvirt to allow late opening of the backing chain
during a blockdev-mirror.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-8-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Starting from ceph Nautilus, RBD has support for namespaces, allowing
for finer grain ACLs on images inside a pool, and tenant isolation.
In the rbd cli tool documentation, the new image-spec and snap-spec are :
- [pool-name/[namespace-name/]]image-name
- [pool-name/[namespace-name/]]image-name@snap-name
When using an non namespace's enabled qemu, it complains about not
finding the image called namespace-name/image-name, thus we only need to
parse the image once again to find if there is a '/' in its name, and if
there is, use what is before it as the name of the namespace to later
pass it to rados_ioctx_set_namespace.
rados_ioctx_set_namespace if called with en empty string or a null
pointer as the namespace parameters pretty much does nothing, as it then
defaults to the default namespace.
The namespace is extracted inside qemu_rbd_parse_filename, stored in the
qdict, and used in qemu_rbd_connect to make it work with both qemu-img,
and qemu itself.
Signed-off-by: Florian Florensa <fflorensa@online.net>
Message-Id: <20200110111513.321728-2-fflorensa@online.net>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a --export option to qemu-storage-daemon to export a block node. For
now, only NBD exports are implemented. Apart from the 'type' option
(which is the implied key), it maps the arguments for nbd-server-add to
the command line. Example:
--export nbd,device=disk,name=test-export,writable=on
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-12-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the arguments of nbd-server-add to a new struct BlockExportNbd and
convert the command to 'boxed': true. This makes it easier to share code
with the storage daemon.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-11-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a --nbd-server option to qemu-storage-daemon to start the built-in
NBD server right away. It maps the arguments for nbd-server-start to the
command line, with the exception that it uses SocketAddress instead of
SocketAddressLegacy: New interfaces shouldn't use legacy types, and the
additional nesting would be nasty on the command line.
Example (only with required options):
--nbd-server addr.type=inet,addr.host=localhost,addr.port=10809
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-10-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QMP commands that are related to the system emulator and don't make
sense in the context of tools such as qemu-storage-daemon should live in
qapi/block.json rather than qapi/block-core.json. Move them there.
The associated data types are actually also used in code shared with the
tools, so they stay in block-core.json.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-6-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block-core is for everything that isn't related to the system emulator.
Internal snapshots, the NBD server and quorum events make sense in the
tools, too, so move them to block-core.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-5-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a management application manages node names there's no reason to
recurse into backing images in the output of query-named-block-nodes.
Add a parameter to the command which will return just the top level
structs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <4470f8c779abc404dcf65e375db195cd91a80651.1579509782.git.pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[mreitz: Fixed coding style]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that the error handling in the common block job is fixed, we can
expose the on-error option in QMP instead of hard-coding it as 'report'
in qmp_block_commit().
This fulfills the promise that the old comment in that function made,
even if a bit later than expected: "This will be part of the QMP
command, if/when the BlockdevOnError change for blkmirror makes it in".
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200214200812.28180-7-kwolf@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is not obvious what 'ignore' actually means for block jobs: It could
be continuing the job and returning success in the end despite the error
(no block job does this). It could also mean continuing and returning
failure in the end (this is what stream does). And it can mean retrying
the failed request later (this is what backup, commit and mirror do).
This (somewhat inconsistent) behaviour was introduced and described for
stream and mirror in commit 32c81a4a6e. backup and commit were
introduced later and use the same model as mirror.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200214200812.28180-2-kwolf@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We would like to switch the doc comments to rST format. rST
insists on a blank line before and after a bulleted list, but our
Texinfo doc generator did not. Add some extra blank lines in the doc
comments so they're acceptable rST input.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200213175647.17628-17-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A JSON block comment like this:
Returns: nothing on success
If @node is not a valid block device, DeviceNotFound
If @name is not found, GenericError with an explanation
renders like this:
Returns: nothing on success If node is not a valid block device,
DeviceNotFound If name is not found, GenericError with an explanation
because whitespace is not significant.
Use an actual bulleted list, so that the formatting is correct.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-14-peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-15-peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-16-peter.maydell@linaro.org>
[Three commits squashed into one]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
There are some stray hardcoded tabs in some of our json files;
remove them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213175647.17628-11-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The current doc generation doesn't care much about indentation levels,
but we would like to switch to an rST format, and rST does care about
indentation.
Make the doc comments more strongly consistent about indentation
for multiline constructs like:
@arg: description line 1
description line 2
Returns: line one
line 2
so that there is always exactly one space after the colon, and
subsequent lines align with the first.
This commit is a purely whitespace change, and it does not alter the
generated .texi files (because the texi generation code strips away
all the extra whitespace). This does mean that we end up with some
over-length lines.
Note that when the documentation for an argument fits on a single
line like this:
@arg: one line only
then stray extra spaces after the ':' don't affect the rST output, so
I have not attempted to methodically fix them, though the preference
is a single space here too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-10-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Some qapi doc comments have forgotten the ':' after the
@argument, like this:
# @filename Filename for the new image file
# @size Size of the virtual disk in bytes
The result is that these are parsed as part of the body
text and appear as a run-on line:
filename Filename for the new image file size Size of the virtual disk in bytes"
followed by
filename: string
Not documented
size: int
Not documented
in the 'Members' section.
Correct the formatting.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213175647.17628-9-peter.maydell@linaro.org>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The ascii-art graph in the BlockLatencyHistogramInfo documentation
doesn't render correctly, because the whitespace is collapsed.
Use the '|' format that emits a literal 'example' block so the graph
is displayed correctly.
Strictly the Texinfo generated is still wrong because each line
goes into its own @example environment, but it renders better
than what we had before.
Fixing this rendering is a necessary prerequisite for the upcoming rST
generator, which otherwise complains about the inconsistent
indentation in the ascii-art graph.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-8-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Since io_uring is the actual name of the Linux API, we use it as enum
value even though the QAPI schema conventions would prefer io-uring.
Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200120141858.587874-3-stefanha@redhat.com
Message-Id: <20200120141858.587874-3-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow writing all the data compressed through the filter driver.
The written data will be aligned by the cluster size.
Based on the QEMU current implementation, that data can be written to
unallocated clusters only. May be used for a backup job.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 1575288906-551879-2-git-send-email-andrey.shinkevich@virtuozzo.com
[mreitz: Replace NULL bdrv_get_format_name() by "(no format)"]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Sometimes it is useful to be able to add a node to the block graph that
takes or unshare a certain set of permissions for debugging purposes.
This patch adds this capability to blkdebug.
(Note that you cannot make blkdebug release or share permissions that it
needs to take or cannot share, because this might result in assertion
failures in the block layer. But if the blkdebug node has no parents,
it will not take any permissions and share everything by default, so you
can then freely choose what permissions to take and share.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191108123455.39445-4-mreitz@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Mention that this is a PCI device address & give the format it is
expected in. Also mention that it must be first unbound from any
host kernel driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We document that for qcow2 persistent bitmaps, the name cannot exceed
1023 bytes. It is inconsistent if transient bitmaps do not have to
abide by the same limit, and it is unlikely that any existing client
even cares about using bitmap names this long. It's time to codify
that ALL bitmaps managed by qemu (whether persistent in qcow2 or not)
have a documented maximum length.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191114024635.11363-3-eblake@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
This patch adds support for blkreplay driver to the blockdev options.
Now blkreplay can be used with -blockdev command line option
in the following format:
-blockdev driver=blkreplay,image=file-node-name,node-name=replay-node-name
This option makes possible implementation of the better command
line support for record/replay invocations.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This parameter has been deprecated since 2.12.0 and is eligible for
removal. Remove this parameter as it is actually completely ignored;
let's not give false hope.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191002232411.29968-1-jsnow@redhat.com
Drop write notifiers and use filter node instead.
= Changes =
1. Add filter-node-name argument for backup qmp api. We have to do it
in this commit, as 257 needs to be fixed.
2. There are no more write notifiers here, so is_write_notifier
parameter is dropped from block-copy paths.
3. To sync with in-flight requests at job finish we now have drained
removing of the filter, we don't need rw-lock.
4. Block-copy is now using BdrvChildren instead of BlockBackends
5. As backup-top owns these children, we also move block-copy state
into backup-top's ownership.
= Iotest changes =
56: op-blocker doesn't shoot now, as we set it on source, but then
check on filter, when trying to start second backup.
To keep the test we instead can catch another collision: both jobs will
get 'drive0' job-id, as job-id parameter is unspecified. To prevent
interleaving with file-posix locks (as they are dependent on config)
let's use another target for second backup.
Also, it's obvious now that we'd like to drop this op-blocker at all
and add a test-case for two backups from one node (to different
destinations) actually works. But not in these series.
141: Output changed: prepatch, "Node is in use" comes from bdrv_has_blk
check inside qmp_blockdev_del. But we've dropped block-copy blk
objects, so no more blk objects on source bs (job blk is on backup-top
filter bs). New message is from op-blocker, which is the next check in
qmp_blockdev_add.
257: The test wants to emulate guest write during backup. They should
go to filter node, not to original source node, of course. Therefore we
need to specify filter node name and use it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191001131409.14202-6-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
A block driver can provide a callback to report driver-specific
statistics.
file-posix driver now reports discard statistics
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190923121737.83281-10-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20190923121737.83281-3-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Make the stat fields definition slightly more readable.
Also reorder total_time_ns stats read-write-flush as done elsewhere.
Cosmetic change only.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190923121737.83281-2-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When preallocating an encrypted qcow2 image, it just lets the protocol
driver write data and then does not mark the clusters as zero.
Therefore, reading this image will yield effectively random data.
As such, we have not fulfilled the promise of always writing zeroes when
preallocating an image in a while. It seems that nobody has really
cared, so change the documentation to conform to qemu's actual behavior.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190711132935.13070-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Let's add a possibility to query dirty-bitmaps not only on root nodes.
It is useful when dealing both with snapshots and incremental backups.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20190717173937.18747-1-jsnow@redhat.com
[Added deprecation information. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
[Fixed spelling --js]
Accept bitmaps and sync policies for the other backup modes.
This allows us to do things like create a bitmap synced to a full backup
without a transaction, or start a resumable backup process.
Some combinations don't make sense, though:
- NEVER policy combined with any non-BITMAP mode doesn't do anything,
because the bitmap isn't used for input or output.
It's harmless, but is almost certainly never what the user wanted.
- sync=NONE is more questionable. It can't use on-success because this
job never completes with success anyway, and the resulting artifact
of 'always' is suspect: because we start with a full bitmap and only
copy out segments that get written to, the final output bitmap will
always be ... a fully set bitmap.
Maybe there's contexts in which bitmaps make sense for sync=none,
but not without more severe changes to the current job, and omitting
it here doesn't prevent us from adding it later.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This adds an "always" policy for bitmap synchronization. Regardless of if
the job succeeds or fails, the bitmap is *always* synchronized. This means
that for backups that fail part-way through, the bitmap retains a record of
which sectors need to be copied out to accomplish a new backup using the
old, partial result.
In effect, this allows us to "resume" a failed backup; however the new backup
will be from the new point in time, so it isn't a "resume" as much as it is
an "incremental retry." This can be useful in the case of extremely large
backups that fail considerably through the operation and we'd like to not waste
the work that was already performed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-13-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This adds a "never" policy for bitmap synchronization. Regardless of if
the job succeeds or fails, we never update the bitmap. This can be used
to perform differential backups, or simply to avoid the job modifying a
bitmap.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We don't need or want a new sync mode for simple differences in
semantics. Create a new mode simply named "BITMAP" that is designed to
make use of the new Bitmap Sync Mode field.
Because the only bitmap sync mode is 'on-success', this adds no new
functionality to the backup job (yet). The old incremental backup mode
is maintained as a syntactic sugar for sync=bitmap, mode=on-success.
Add all of the plumbing necessary to support this new instruction.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Depending on what a user is trying to accomplish, there might be a few
bitmap cleanup actions that occur when an operation is finished that
could be useful.
I am proposing three:
- NEVER: The bitmap is never synchronized against what was copied.
- ALWAYS: The bitmap is always synchronized, even on failures.
- ON-SUCCESS: The bitmap is synchronized only on success.
The existing incremental backup modes use 'on-success' semantics,
so add just that one for right now.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190709232550.10724-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
drive-backup and blockdev-backup have an awful lot of things in common
that are the same. Let's fix that.
I don't deduplicate 'target', because the semantics actually did change
between each structure. Leave that one alone so it can be documented
separately.
Where documentation was not identical, use the most up-to-date version.
For "speed", use Blockdev-Backup's version. For "sync", use
Drive-Backup's version.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
[Maintainer edit: modified commit message. --js]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190709232550.10724-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Reconnect will be implemented in the following commit, so for now,
in semantics below, disconnect itself is a "serious error".
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190618114328.55249-5-vsementsov@virtuozzo.com>
[eblake: slipped from 4.1 to 4.2]
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit cd219eb1e5 added the read-zeroes option for the null-co and
null-aio block driver, but forgot to add them to the QAPI schema.
Therefore, this option wasn't available in -blockdev and blockdev-add
until now.
Add the missing option in the schema to make it available there, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190507203508.18026-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Together with @iotypes and @sector, this can be used to trap e.g. the
first read or write access to a certain sector without having to know
what happens internally in the block layer, i.e. which "real" events
happen right before such an access.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190507203508.18026-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This new error option allows users of blkdebug to inject errors only on
certain kinds of I/O operations. Users usually want to make a very
specific operation fail, not just any; but right now they simply hope
that the event that triggers the error injection is followed up with
that very operation. That may not be true, however, because the block
layer is changing (including blkdebug, which may increase the number of
types of I/O operations on which to inject errors).
The new option's default has been chosen to keep backwards
compatibility.
Note that similar to the internal representation, we could choose to
expose this option as a list of I/O types. But there is no practical
use for this, because as described above, users usually know exactly
which kind of operation they want to make fail, so there is no need to
specify multiple I/O types at once. In addition, exposing this option
as a list would require non-trivial changes to qemu_opts_absorb_qdict().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190507203508.18026-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
A snapshot is something that reflects the state of something at a
certain point in time. It does not change.
The file our snapshot commands create (or the node they install) is not
a snapshot, as it does change over time. It is an overlay. We cannot
do anything about the parameter names, but we can at least adjust the
descriptions to reflect that fact.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20190603202236.1342-2-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
In commit 23dece19da ('file-posix: Make auto-read-only dynamic') ,
auto-read-only=on changed its behaviour in file-posix for the 4.0
release. This change cannot be detected through the usual mechanisms
like schema introspection. Add a new feature flag to the schema to
allow libvirt to detect the presence of the new behaviour.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190606153803.5278-7-armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Comment tweaked on Eric Blake's advice]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add default and available values in the documentation block of
each block device or protocol that supports the 'preallocation'
parameter during the image creation.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190524075848.23781-2-sgarzare@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add new optional parameter making possible to merge bitmaps from
different nodes. It is needed to maintain external snapshots during
incremental backup chain history.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190517152111.206494-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
If COW areas of the newly allocated clusters are zeroes on the backing
image, efficient bdrv_write_zeroes(flags=BDRV_REQ_NO_FALLBACK) can be
used on the whole cluster instead of writing explicit zero buffers later
in perform_cow().
iotest 060:
write to the discarded cluster does not trigger COW anymore.
Use a backing image instead.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Message-id: 20190516142749.81019-2-anton.nefedov@virtuozzo.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
