The SSE-300 has an ITCM at 0x0000_0000 and a DTCM at 0x2000_0000.
Currently we model these in the AN547 board, but this is conceptually
wrong, because they are a part of the SSE-300 itself. Move the
modelling of the TCMs out of mps2-tz.c into sse300.c.
This has no guest-visible effects.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210510190844.17799-7-peter.maydell@linaro.org
Currently we model the ITCM in the AN547's RAMInfo list. This is incorrect
because this RAM is really a part of the SSE-300. We can't just delete
it from the RAMInfo list, though, because this would make boot_ram_size()
assert because it wouldn't be able to find an entry in the list covering
guest address 0.
Allow a board to specify a boot RAM size manually if it doesn't have
any RAM itself at address 0 and is relying on the SSE for that, and
set the correct value for the AN547. The other boards can continue
to use the "look it up from the RAMInfo list" logic.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210510190844.17799-6-peter.maydell@linaro.org
Convert armsse_realize() to use ERRP_GUARD(), following
the rules in include/qapi/error.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210510190844.17799-5-peter.maydell@linaro.org
The SSE-300 was not correctly modelling its internal SRAMs:
* the SRAM address width default is 18
* the SRAM is mapped at 0x2100_0000, not 0x2000_0000 like
the SSE-200 and IoTKit
The default address width is no longer guest-visible since
our only SSE-300 board sets it explicitly to a non-default
value, but following the hardware's default will help for
any future boards we need to model.
Reported-by: Devaraj Ranganna <devaraj.ranganna@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210510190844.17799-4-peter.maydell@linaro.org
The AN547 sets the SRAM_ADDR_WIDTH for the SSE-300 to 21;
since this is not the default value for the SSE-300, model this
in mps2-tz.c as a per-board value.
Reported-by: Devaraj Ranganna <devaraj.ranganna@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210510190844.17799-3-peter.maydell@linaro.org
The SRAM at 0x2000_0000 is part of the SSE-200 itself, and we model
it that way in hw/arm/armsse.c (along with the associated MPCs). We
incorrectly also added an entry to the RAMInfo array for the AN524 in
hw/arm/mps2-tz.c, which was pointless because the CPU would never see
it. Delete it.
The bug had no guest-visible effect because devices in the SSE-200
take priority over those in the board model (armsse.c maps
s->board_memory at priority -2).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210510190844.17799-2-peter.maydell@linaro.org
In icc_eoir_write() we assume that we can identify the group of the
IRQ being completed based purely on which register is being written
to and the current CPU state, and that "CPU state matches group
indicated by register" is the only necessary access check.
This isn't correct: if the CPU is not in Secure state then EOIR1 will
only complete Group 1 NS IRQs, but if the CPU is in EL3 it can
complete both Group 1 S and Group 1 NS IRQs. (The pseudocode
ICC_EOIR1_EL1 makes this clear.) We were also missing the logic to
prevent EOIR0 writes completing G0 IRQs when they should not.
Rearrange the logic to first identify the group of the current
highest priority interrupt and then look at whether we should
complete it or ignore the access based on which register was accessed
and the state of the CPU. The resulting behavioural change is:
* EL3 can now complete G1NS interrupts
* G0 interrupt completion is now ignored if the GIC
and the CPU have the security extension enabled and
the CPU is not secure
Reported-by: Chan Kim <ckim@etri.re.kr>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210510150016.24910-1-peter.maydell@linaro.org
6d9cd115b9 ("hw/arm/smmuv3: Enforce invalidation on a power of two range")
failed to completely fix misalignment issues with range
invalidation. For instance invalidations patterns like "invalidate 32
4kB pages starting from 0xff395000 are not correctly handled" due
to the fact the previous fix only made sure the number of invalidated
pages were a power of 2 but did not properly handle the start
address was not aligned with the range. This can be noticed when
boothing a fedora 33 with protected virtio-blk-pci.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Fixes: 6d9cd115b9 ("hw/arm/smmuv3: Enforce invalidation on a power of two range")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Quote docs/devel/style.rst (section "Automatic memory deallocation"):
* Variables declared with g_auto* MUST always be initialized,
otherwise the cleanup function will use uninitialized stack memory
Initialize @name properly to get rid of the compilation error (using
gcc-7.3.0 on CentOS):
../hw/remote/proxy.c: In function 'pci_proxy_dev_realize':
/usr/include/glib-2.0/glib/glib-autocleanups.h:28:3: error: 'name' may be used uninitialized in this function [-Werror=maybe-uninitialized]
g_free (*pp);
^~~~~~~~~~~~
../hw/remote/proxy.c:350:30: note: 'name' was declared here
g_autofree char *name;
^~~~
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-id: 20210312112143.1369-1-yuzenghui@huawei.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The vfio_ccw_unrealize() routine makes an unconditional attempt to
unregister every IRQ notifier, though they may not have been registered
in the first place (when running on an older kernel, for example).
Let's mirror this behavior in the error cleanups in vfio_ccw_realize()
so that if/when new IRQs are added, it is less confusing to recognize
the necessary procedures. The worst case scenario would be some extra
messages about an undefined IRQ, but since this is an error exit that
won't be the only thing to worry about.
And regarding those messages, let's change it to a warning instead of
an error, to better reflect their severity. The existing code in both
paths handles everything anyway.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20210428143652.1571487-1-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Instead of having all TYPE_CCW_DEVICE children set the bus type to
TYPE_VIRTUAL_CSS_BUS, do it once in the abstract parent.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20210424145313.3287400-1-f4bug@amsat.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Commit 690e29b911 ("vfio-ccw: Refactor ccw irq handler") changed
one of the checks for the IRQ notifier registration from saying
"the host needs to recognize the only IRQ that exists" to saying
"the host needs to recognize ANY IRQ that exists."
And this worked fine, because the subsequent change to support the
CRW IRQ notifier doesn't get into this code when running on an older
kernel, thanks to a guard by a capability region. The later addition
of the REQ(uest) IRQ by commit b2f96f9e4f ("vfio-ccw: Connect the
device request notifier") broke this assumption because there is no
matching capability region. Thus, running new QEMU on an older
kernel fails with:
vfio: unexpected number of irqs 2
Let's adapt the message here so that there's a better clue of what
IRQ is missing.
Furthermore, let's make the REQ(uest) IRQ not fail when attempting
to register it, to permit running vfio-ccw on a newer QEMU with an
older kernel.
Fixes: b2f96f9e4f ("vfio-ccw: Connect the device request notifier")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20210421152053.2379873-1-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
- various fixes for binfmt_misc docker images
- add hexagon check-tcg support docker image
- add tricore check-tcg support
- refactor ppc docker images
- add missing ppc64le tests
- don't use host_cc for test fallback
- check-tcg configure.sh tweaks for cross compile/clang
- fix some memory leaks in plugins
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmCjfMEACgkQ+9DbCVqe
KkQ+aQf/QX5prjX9IW64GzwmZLdgufrc9fwdbrhyNTglcS0gN/hti6is3gBhe9dU
KynWvmjvnosDT1EI53ciVkSRrwDLptpyq3bz140RjmSmPFQvUP16yF3KTThBxXuO
1BZk7iq5jzv3jVHD4j4zQPyMRatyBBToKtIboSZntljq6WTomv8gWu8+vdlWGzeG
0ubW1k9YHZNnQ0Et5xjqQBgBbjoOQvbkLYwNyyDjkOem8p4oKFIyTcRP9PYSJ9t3
cq314LuFJVjW1TMywvgHOlZEwzqRqOtdzW1RC1EbVqYR+lifAgYRI/kTEwL3Ab7j
Z+hybdzlfJdUPNiJ5Q4rjDpuKI+1Nw==
=FYwg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-plugin-updates-180521-2' into staging
testing and plugin updates:
- various fixes for binfmt_misc docker images
- add hexagon check-tcg support docker image
- add tricore check-tcg support
- refactor ppc docker images
- add missing ppc64le tests
- don't use host_cc for test fallback
- check-tcg configure.sh tweaks for cross compile/clang
- fix some memory leaks in plugins
# gpg: Signature made Tue 18 May 2021 09:37:21 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-plugin-updates-180521-2: (29 commits)
configure: use cc, not host_cc to set cross_cc for build arch
tests/tcg: don't allow clang as a cross compiler
tests/tcg: fix missing return
tests/tcg/ppc64le: tests for brh/brw/brd
tests/docker: gcc-10 based images for ppc64{,le} tests
tests/tcg/tricore: Add muls test
tests/tcg/tricore: Add msub test
tests/tcg/tricore: Add madd test
tests/tcg/tricore: Add ftoi test
tests/tcg/tricore: Add fmul test
tests/tcg/tricore: Add fadd test
tests/tcg/tricore: Add dvstep test
tests/tcg/tricore: Add clz test
tests/tcg/tricore: Add bmerge test
tests/tcg/tricore: Add macros to create tests and first test 'abs'
configure: Emit HOST_CC to config-host.mak
tests/tcg/tricore: Add build infrastructure
hw/tricore: Add testdevice for tests in tests/tcg/
tests/tcg: Run timeout cmds using --foreground
tests/tcg: Add docker_as and docker_ld cmds
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Next set of ppc related patches for qemu-6.1. Highlights are:
* Start of a significant softmmu cleanup from Richard Henderson
* Further work towards allowing builds without CONFIG_TCG
-----BEGIN PGP SIGNATURE-----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=FI4M
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.1-20210519' into staging
ppc patch queue 2021-05-19
Next set of ppc related patches for qemu-6.1. Highlights are:
* Start of a significant softmmu cleanup from Richard Henderson
* Further work towards allowing builds without CONFIG_TCG
# gpg: Signature made Wed 19 May 2021 13:36:45 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dg-gitlab/tags/ppc-for-6.1-20210519: (48 commits)
target/ppc: Remove type argument for mmubooke206_get_physical_address
target/ppc: Remove type argument from mmubooke206_check_tlb
target/ppc: Remove type argument from mmubooke_get_physical_address
target/ppc: Remove type argument from mmubooke_check_tlb
target/ppc: Remove type argument from mmu40x_get_physical_address
target/ppc: Remove type argument from get_bat_6xx_tlb
target/ppc: Remove type argument from ppc6xx_tlb_check
target/ppc: Remove type argument from ppc6xx_tlb_pte_check
target/ppc: Remove type argument from check_prot
target/ppc: Use MMUAccessType in mmu_helper.c
target/ppc: Rename access_type to type in mmu_helper.c
target/ppc: Use MMUAccessType in mmu-hash32.c
target/ppc: Use MMUAccessType in mmu-hash64.c
target/ppc: Use MMUAccessType in mmu-radix64.c
target/ppc: Introduce prot_for_access_type
target/ppc: Fix load endianness for lxvwsx/lxvdsx
target/ppc: Use translator_loop_temp_check
target/ppc: Mark helper_raise_exception* as noreturn
target/ppc: Tidy exception vs exit_tb
target/ppc: Move single-step check to ppc_tr_tb_stop
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- vhost-user-blk: Fix error handling during initialisation
- Add test cases for the vhost-user-blk export
- Fix leaked Transaction objects
- qcow2: Expose dirty bit in 'qemu-img info'
-----BEGIN PGP SIGNATURE-----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=Xe4O
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
- vhost-user-blk: Fix error handling during initialisation
- Add test cases for the vhost-user-blk export
- Fix leaked Transaction objects
- qcow2: Expose dirty bit in 'qemu-img info'
# gpg: Signature made Tue 18 May 2021 11:57:46 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
vhost-user-blk: Check that num-queues is supported by backend
virtio: Fail if iommu_platform is requested, but unsupported
vhost-user-blk: Get more feature flags from vhost device
vhost-user-blk: Improve error reporting in realize
vhost-user-blk: Don't reconnect during initialisation
vhost-user-blk: Make sure to set Error on realize failure
vhost-user-blk-test: test discard/write zeroes invalid inputs
tests/qtest: add multi-queue test case to vhost-user-blk-test
test: new qTest case to test the vhost-user-blk-server
block/export: improve vu_blk_sect_range_ok()
block: Fix Transaction leak in bdrv_reopen_multiple()
block: Fix Transaction leak in bdrv_root_attach_child()
qcow2: set bdi->is_dirty
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Moved has_spr to cpu.h as ppc_has_spr and turned it into an inline function.
Change spr verification in pnv.c and spapr.c to a version that can
compile in a !TCG environment.
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Message-Id: <20210507164146.67086-1-lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The function ppc_hash64_filter_pagesizes has been moved from a function
with prototype in mmu-hash64.h and implemented in mmu-hash64.c to
a static function in hw/ppc/spapr_caps.c as it's only used in that file.
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Message-Id: <20210506163941.106984-3-lucas.araujo@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The hypercalls h_enter, h_remove, h_bulk_remove, h_protect, and h_read,
have been moved to spapr_softmmu.c with the functions they depend on. The
functions is_ram_address and push_sregs_to_kvm_pr are not static anymore
as functions on both spapr_hcall.c and spapr_softmmu.c depend on them.
The hypercalls h_resize_hpt_prepare and h_resize_hpt_commit have been
divided, the KVM part stayed in spapr_hcall.c while the softmmu part
was moved to spapr_softmmu.c
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Message-Id: <20210506163941.106984-2-lucas.araujo@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Starting with Linux kernel v5.12 we dropped support[1] in KVM for
hosts that can't have their threads running in different MMU modes
(POWER9 < DD2.2). In these hosts, KVM will no longer report the
KVM_CAP_PPC_MMU_HASH_V3 capability[2] when the host is running Radix.
For guests that support both MMU modes, the negotiation during CAS
will make sure it selects the correct one.
For guests that only support Hash, such as P8 compat mode guests, the
following error is currently thrown:
$ ~/qemu-system-ppc64 -machine pseries,accel=kvm,max-cpu-compat=power8 ...
error: kvm run failed Invalid argument
NIP 0000000000000100 LR 0000000000000000 CTR 0000000000000000 XER 0000000000000000 CPU#0
MSR 8000000000001000 HID0 0000000000000000 HF 8000000000000000 iidx 3 didx 3
TB 00000000 00000000 DECR 0
GPR00 0000000000000000 0000000000000000 0000000000000000 000000007ff00000
GPR04 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR08 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR12 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR16 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR28 0000000000000000 0000000000000000 0000000000000000 0000000000000000
CR 00000000 [ - - - - - - - - ] RES ffffffffffffffff
SRR0 0000000000000000 SRR1 0000000000000000 PVR 00000000004e1201 VRSAVE 0000000000000000
SPRG0 0000000000000000 SPRG1 0000000000000000 SPRG2 0000000000000000 SPRG3 0000000000000000
SPRG4 0000000000000000 SPRG5 0000000000000000 SPRG6 0000000000000000 SPRG7 0000000000000000
HSRR0 0000000000000000 HSRR1 0000000000000000
CFAR 0000000000000000
LPCR 000000000004f01f
PTCR 0000000000000000 DAR 0000000000000000 DSISR 0000000000000000
This patch adds a verification during the writing of the platform
support vector so that we error out as soon as we determine this guest
only supports Hash and the host doesn't.
~/qemu-system-ppc64 -machine pseries,accel=kvm,max-cpu-compat=power8 ...
qemu-system-ppc64: Guest requested unavailable MMU mode (hash).
1- https://git.kernel.org/torvalds/p/b1b1697ae0cc8
2- https://git.kernel.org/torvalds/p/a722076e94702
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20210505001130.3999968-3-farosas@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A following patch will make use of it.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20210505001130.3999968-2-farosas@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Creating a device with a number of queues that isn't supported by the
backend is pointless, the device won't work properly and the error
messages are rather confusing.
Just fail to create the device if num-queues is higher than what the
backend supports.
Since the relationship between num-queues and the number of virtqueues
depends on the specific device, this is an additional value that needs
to be initialised by the device. For convenience, allow leaving it 0 if
the check should be skipped. This makes sense for vhost-user-net where
separate vhost devices are used for the queues and custom initialisation
code is needed to perform the check.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935031
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20210429171316.162022-7-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 2943b53f6 (' virtio: force VIRTIO_F_IOMMU_PLATFORM') made sure
that vhost can't just reject VIRTIO_F_IOMMU_PLATFORM when it was
requested. However, just adding it back to the negotiated flags isn't
right either because it promises support to the guest that the device
actually doesn't support. One example of a vhost-user device that
doesn't have support for the flag is the vhost-user-blk export of QEMU.
Instead of successfully creating a device that doesn't work, just fail
to plug the device when it doesn't support the feature, but it was
requested. This results in much clearer error messages.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935019
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20210429171316.162022-6-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
VIRTIO_F_RING_PACKED and VIRTIO_F_IOMMU_PLATFORM need to be supported by
the vhost device, otherwise advertising it to the guest doesn't result
in a working configuration. They are currently not supported by the
vhost-user-blk export in QEMU.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935020
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20210429171316.162022-5-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that vhost_user_blk_connect() is not called from an event handler
any more, but directly from vhost_user_blk_device_realize(), we can
actually make use of Error again instead of calling error_report() in
the inner function and setting a more generic and therefore less useful
error message in realize() itself.
With Error, the callers are responsible for adding context if necessary
(such as the "-device" option the error refers to). Additional prefixes
are redundant and better omitted.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20210429171316.162022-4-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a partial revert of commits 77542d4314 and bc79c87bcd.
Usually, an error during initialisation means that the configuration was
wrong. Reconnecting won't make the error go away, but just turn the
error condition into an endless loop. Avoid this and return errors
again.
Additionally, calling vhost_user_blk_disconnect() from the chardev event
handler could result in use-after-free because none of the
initialisation code expects that the device could just go away in the
middle. So removing the call fixes crashes in several places.
For example, using a num-queues setting that is incompatible with the
backend would result in a crash like this (dereferencing dev->opaque,
which is already NULL):
#0 0x0000555555d0a4bd in vhost_user_read_cb (source=0x5555568f4690, condition=(G_IO_IN | G_IO_HUP), opaque=0x7fffffffcbf0) at ../hw/virtio/vhost-user.c:313
#1 0x0000555555d950d3 in qio_channel_fd_source_dispatch (source=0x555557c3f750, callback=0x555555d0a478 <vhost_user_read_cb>, user_data=0x7fffffffcbf0) at ../io/channel-watch.c:84
#2 0x00007ffff7b32a9f in g_main_context_dispatch () at /lib64/libglib-2.0.so.0
#3 0x00007ffff7b84a98 in g_main_context_iterate.constprop () at /lib64/libglib-2.0.so.0
#4 0x00007ffff7b32163 in g_main_loop_run () at /lib64/libglib-2.0.so.0
#5 0x0000555555d0a724 in vhost_user_read (dev=0x555557bc62f8, msg=0x7fffffffcc50) at ../hw/virtio/vhost-user.c:402
#6 0x0000555555d0ee6b in vhost_user_get_config (dev=0x555557bc62f8, config=0x555557bc62ac "", config_len=60) at ../hw/virtio/vhost-user.c:2133
#7 0x0000555555d56d46 in vhost_dev_get_config (hdev=0x555557bc62f8, config=0x555557bc62ac "", config_len=60) at ../hw/virtio/vhost.c:1566
#8 0x0000555555cdd150 in vhost_user_blk_device_realize (dev=0x555557bc60b0, errp=0x7fffffffcf90) at ../hw/block/vhost-user-blk.c:510
#9 0x0000555555d08f6d in virtio_device_realize (dev=0x555557bc60b0, errp=0x7fffffffcff0) at ../hw/virtio/virtio.c:3660
Note that this removes the ability to reconnect during initialisation
(but not during operation) when there is no permanent error, but the
backend restarts, as the implementation was buggy. This feature can be
added back in a follow-up series after changing error paths to
distinguish cases where retrying could help from cases with permanent
errors.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210429171316.162022-3-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have to set errp before jumping to virtio_err, otherwise the caller
(virtio_device_realize()) will take this as success and crash when it
later tries to access things that we've already freed in the error path.
Fixes: 77542d4314
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210429171316.162022-2-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
this device is used to verify the correctness of regression tests by
allowing guests to write their exit status to this device. This is then
used by qemu to exit using the written status.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210305170045.869437-4-kbastian@mail.uni-paderborn.de>
Message-Id: <20210512102051.12134-14-alex.bennee@linaro.org>
With the introduction of the nvme-subsystem device we are really
cluttering up the hw/block directory.
As suggested by Philippe previously, move the nvme emulation to hw/nvme.
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Validation of the max_active and max_open zoned parameters are
independent of any other state, so move them to the early
nvme_ns_check_constraints parameter checks.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
It is not an error to report more active/open zones supported than the
number of zones in the namespace.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
The NvmeCtrl num_namespaces member is just an indirection for the
NVME_MAX_NAMESPACES constant.
Remove the indirection.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Streamline namespace array indexing such that both the subsystem and
controller namespaces arrays are 1-indexed.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
There is no need to look up the lba size and metadata size in the LBA
Format structure everytime we want to use it. And we use it a lot.
Cache the values in the NvmeNamespace and update them if the namespace
is formatted.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
The inline nvme_ns_status() helper only has a single call site. Remove
it from the header file and inline it for real.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
In preparation for moving the nvme device into its own subtree, merge
the header files into one.
Also add missing copyright notice and add list of authors with
substantial contributions.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Get rid of the (reserved) double underscore use.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Get rid of the (reserved) double underscore use.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Get rid of the (reserved) double underscore use. Rename the "generic"
zone open function to nvme_zrm_open_flags() and add a generic `int
flags` argument instead which allows more flags to be easily added in
the future. There is at least one TP under standardization that would
add an additional flag.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
While QEMU coding style prefers lowercase hexadecimals in constants, the
NVMe subsystem uses the format from the NVMe specifications in comments,
i.e. 'h' suffix instead of '0x' prefix.
Fix this up across the code base.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
[k.jensen: updated message; added conversion in a couple of missing comments]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
nvme_map_addr_pmr function arguments not aligned, fix that.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Currently IO Command Set Profile feature is supported, but the feature
support flag not set. Further, this feature is changable. Fix that.
Additionally, remove filling default value of the CQE result with zero,
since it will fall back to the default case anyway.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
[k.jensen: fix up commit message]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Currently in compare command metadata aio read blk_aio_preadv return
value ignored. Consider it and complete the block accounting.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Fixes: 0a384f923f ("hw/block/nvme: add compare command")
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Currently pci_nvme_err_invalid_lba_range trace is called individually at
each nvme_check_bounds() call site.
Move the trace event to nvme_check_bounds() and remove the redundant
events.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[k.jensen: commit message fixup]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Fixes all over the place. Faster boot for virtio. ioeventfd support for
mmio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmCeiMEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpqsIH/A49Av5Bv8huL75lf9GzCx3E1a/z2W9Fphik
OcQ1ahR+7CRDARub+vTG40MBmZBVefIWjLAj3BwBWzFGPX0DZq0zeI102VzlEVKY
OeUx8ixuiKOSLcS+QxE7ZXIBL2Pn7l+MFUi4nLMYKti7c/kola7zlB57qsmXh+VD
AOQ7Utj6NWoi6QocWJsMSCyHCh3Fk9QzcStLlr6/MkSJa1zqv8l22+8oWH07Fk2M
wZfhrm9k094on28iSejsFYL5e4ROeXUajbOdfyMIxWvAB7boC9Jxk/e0oAbuSB4y
2f71Gfk3mU6irS7PvrxcKbk6BVD2zxM2WumOchZJgxFAujDO6yg=
=fvkT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio: bugfixes, improvements
Fixes all over the place. Faster boot for virtio. ioeventfd support for
mmio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 14 May 2021 15:27:13 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
Fix build with 64 bits time_t
vhost-vdpa: Make vhost_vdpa_get_device_id() static
hw/virtio: enable ioeventfd configuring for mmio
hw/smbios: support for type 41 (onboard devices extended information)
checkpatch: Fix use of uninitialized value
virtio-scsi: Configure all host notifiers in a single MR transaction
virtio-scsi: Set host notifiers and callbacks separately
virtio-blk: Configure all host notifiers in a single MR transaction
virtio-blk: Fix rollback path in virtio_blk_data_plane_start()
pc-dimm: remove unnecessary get_vmstate_memory_region() method
amd_iommu: fix wrong MMIO operations
virtio-net: Constify VirtIOFeature feature_sizes[]
virtio-blk: Constify VirtIOFeature feature_sizes[]
hw/virtio: Pass virtio_feature_get_config_size() a const argument
x86: acpi: use offset instead of pointer when using build_header()
amd_iommu: Fix pte_override_page_mask()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/arm/virt.c
