Two reset fixes:
* pick up s->usbcmd value after ehci_reset call to make sure it
keeps the reset value and doesn't get rubbish filled in when
val is written back to the mmio register array later on.
* make sure the frame timer is zapped on reset.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* kraxel/usb.38: (28 commits)
xhci: handle USB_RET_NAK
xhci: remote wakeup support
xhci: kill port arg from xhci_setup_packet
xhci: stop on errors
xhci: add trb type name lookup support.
xhci: signal low- and fullspeed support
usb: add USBBusOps->wakeup_endpoint
usb: pass USBEndpoint to usb_wakeup
usb: maintain async packet list per endpoint
usb: Set USBEndpoint in usb_packet_setup().
usb: add USBEndpoint->{nr,pid}
usb: USBPacket: add status, rename owner -> ep
usb: fold usb_generic_handle_packet into usb_handle_packet
usb: kill handle_packet callback
usb-xhci: switch to usb_find_device()
usb-musb: switch to usb_find_device()
usb-ohci: switch to usb_find_device()
usb-ehci: switch to usb_find_device()
usb-uhci: switch to usb_find_device()
usb: handle dev == NULL in usb_handle_packet()
...
Replace device_init() with generalized type_init().
While at it, unify naming convention: type_init([$prefix_]register_types)
Also, type_init() is a function, so add preceding blank line where
necessary and don't put a semicolon after the closing brace.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: malc <av1474@comtv.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With the separation of the device lookup (via usb_find_device) and
packet processing we can lookup device and endpoint before setting up
the usb packet. So we can initialize USBPacket->ep early and keep it
valid for the whole lifecycle of the USBPacket. Also the devaddr and
devep fields are not needed any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add enum to track the status of USBPackets, use that instead of the
owner pointer to figure whenever a usb packet is currently in flight
or not. Add some more packet status sanity checks. Also rename the
USBEndpoint pointer from "owner" to "ep".
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The USB subsystem pipes internal reset notifications through
usb_handle_packet() with a special magic PID. This indirection
is a pretty pointless excercise as it ends up being handled by
usb_generic_handle_packet anyway.
Replace the USB_MSG_RESET with a usb_device_reset() function
which can be called directly. Also rename the existing usb_reset()
function to usb_port_reset() to avoid confusion.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
According to the EHCI spec port ownership should revert to the EHCI controller
on device disconnect. This fixes the problem of a port getting stuck on USB 1
when using redirection and plugging in a USB 2 device after a USB 1 device
has been redirected.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This was done in a mostly automated fashion. I did it in three steps and then
rebased it into a single step which avoids repeatedly touching every file in
the tree.
The first step was a sed-based addition of the parent type to the subclass
registration functions.
The second step was another sed-based removal of subclass registration functions
while also adding virtual functions from the base class into a class_init
function as appropriate.
Finally, a python script was used to convert the DeviceInfo structures and
qdev_register_subclass functions to TypeInfo structures, class_init functions,
and type_register_static calls.
We are almost fully converted to QOM after this commit.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
These are various small stylistic changes which help make things more
consistent such that the automated conversion script can be simpler.
It's not necessary to agree or disagree with these style changes because all
of this code is going to be rewritten by the patch monkey script anyway.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add USBEndpoint for the control endpoint to USBDevices. Link async
packets to the USBEndpoint instead of the USBDevice.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch removes some unnecessary casts in the usb-ehci device,
introduced by commit 68d553587c
'usb-ehci: Use PCI DMA stub functions'.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The mmio register name list only had the names for four port status
registers. We emulate a EHCI adapter with six ports though, the last
two ones are listed as "unknown" in traces. Fix it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Coverity thinks q could be NULL there and warns.
I believe it can't be NULL there.
Add assert to prove it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This updates the usb-ehci device emulation to use the explicit PCI DMA
wrapper to initialize its scatter/gathjer structure. This means this
driver should not need further changes when the sglist interface is
extended to support IOMMUs.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
commit 891fb2cd45 removed the implicit
detach before (re-)attaching in usb_attach(). Some usb host controllers
used that behavior though to do a port reset by a detach+attach
sequence.
This patch establishes old behavior by adding a new usb_reset() function
for port resets and putting it into use, thereby also unifying port
reset behavior of all host controllers. The patch also adds asserts to
usb_attach() and usb_detach() to make sure the calls are symmetrical.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix up some erroneous comments in code:
interrupt pins are named A-D, the
interrupt pin register is always readonly
and isn't zeroed out on reset.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch makes qemu assign a port when creating the device, not when
attaching it. For most usb devices this isn't a noticable difference
because they are in attached state all the time.
The change affects usb-host devices which live in detached state while
the real device is unplugged from the host. They have a fixed port
assigned all the time now instead of getting grabbing one on attach and
releasing it at detach, i.e. they stop floating around at the usb bus.
The change also allows to simplify usb-hub. It doesn't need the
handle_attach() callback any more to configure the downstream ports.
This can be done at device initialitation time now. The changed
initialization order (first grab upstream port, then register downstream
ports) also fixes some icky corner cases. For example it is not possible
any more to plug the hub into one of its own downstream ports.
The usb host adapters must care too. USBPort->dev being non-NULL
doesn't imply any more the device is in attached state. The host
adapters must additionally check the USBPort->dev->attached flag.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds code to do minimal siTD handling, which is basically
just following the next pointer. This is good enougth to handle the
inactive siTDs used by FreeBSD. Active siTDs are skipped too as we
don't have split transfer support in qemu, additionally a warning is
printed.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Map guest memory and pass on a direct pointer instead of copying
the bits to a indirect buffer. EHCI transfer descriptors can
reference multiple (physical guest) pages so we'll actually start
seeing usb packets wich carry iovec with more than one element.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Zap data pointer from USBPacket, add a QEMUIOVector instead.
Add a bunch of helper functions to manage USBPacket data.
Switch over users to the new interface.
Note that USBPacket->len was used for two purposes: First to
pass in the buffer size and second to return the number of
transfered bytes or the status code on async transfers. There
is a new result variable for the latter. A new status code
was added to catch uninitialized result.
Nobody creates iovecs with more than one element (yet).
Some users are (temporarely) limited to iovecs with a single
element to keep the patch size as small as possible.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The PED bit should only be set for highspeed devices and the PEDC bit
should not be set on "normal" PED bit changes, only on io errors.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Doing a usb_attach when dev is NULL will just result in the
port detach op getting called even though nothing was connected in
the first place.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Note this fixes 2 things in one go, first of all the device_destroy bus
op should be a device_detach bus op, as pending async packets from the
device should be cancelled on detach not on destroy.
Secondly having this as a bus op won't work with companion controllers, since
then there will be 1 bus driven by the ehci controller and thus 1 set of bus
ops, but the device being detached may be downstream of a handed over port.
Making the detach of a downstream device a port op allows the ehci controller
to forward this to the companion controller port for handed over ports.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This makes them consistent with the attach and detach ops, and in general
it makes sense to make portops take a port as argument. This also makes
adding support for a companion controller easier / cleaner.
[ kraxel: fix usb-musb.c build ]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cleanup / preparation patch for companion controller support. Note that
as a "side-effect" this patch also fixes the milkymist-softusb controller
not having a port_location set for its ports.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add properties for the wakeup rate and the max number of frames ehci
will process at once.
The wakeup rate defaults to 1000 which equals the usb frame rate. This
can be reduced to make qemu wake up less often when ehci is active.
In case the wakeup rate is reduced or the ehci timer is delayed due to
latency issues elsewhere in qemu ehci will process multiple frames at
once. The maxframes property specifies the upper limit for this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch fixes a bunch of issues in the itd descriptor handling.
Most important fix is to handle transfers which cross page borders
correctly by looking up the address of the next page. Luckily the
linux uses physically contigous memory so the data used to hits the
correct location even with this bug instead of corrupting guest
memory. Also the transfer length updates for outgoing transfers wasn't
correct.
While being at it DPRINTFs have been replaced by tracepoints.
The isoch_pause logic has been disabled. Not clear to me which propose
this serves and I think it is incorrect too as we just skip processing
itds. Even when no xfer happens we have to clear the active bit.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The state machine doesn't stop in EXECUTING state any more when async
packets are in flight, so the checks are not needed any more and can
be dropped.
Also kick out the check for the frame timer. As we don't stop & sleep
any more on async packets this is obsolete.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds USBBusOps struct with (for now) only a single callback
which is called when a device is about to be destroyed. The USB Host
adapters are implementing this callback and use it to cancel any async
requests which might be in flight before the device actually goes away.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Set the correct bits for nodev, stall and babble errors.
Raise errint irq. Fix state transition from WRITEBACK
to the next state.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Two bugs at once:
First the mask is backwards, so the it used to keeps the offset and
clears the page address, which is not what we need when we update the
offset.
Second the offset calculation is wrong in case head isn't page aligned.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds support for keeping multiple queues going at the same
time. One slow device will not affect other devices any more.
The patch adds code to manage EHCIQueue structs. It also does a number
of changes to the state machine:
* The state machine will never ever stop in EXECUTING any more.
Instead it will continue with the next queue (aka HORIZONTALQH) when
the usb device returns USB_RET_ASYNC.
* The state machine will stop processing when it figures it walks in
circles (easy to figure now that we have a EHCIQueue struct for each
QH we've processed). The bailout logic should not be needed any
more. For now it is still in, but will assert() in case it triggers.
* The state machine will just skip queues with a async USBPacket in
flight.
* The state machine will resume processing as soon as the async
USBPacket is finished.
The patch also takes care to flush the QH struct back to guest memory
when needed, so we don't get stale data when (re-)loading it from guest
memory in FETCHQH state.
It also makes the writeback code to not touch the first three dwords of
the QH struct as the EHCI must not write them. This actually fixes a
bug where QH chaining changes (next ptr) by the linux ehci driver where
overwritten by the emulated EHCI.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
