This creates a new test group 'quick' for some test case that take at
most a couple of seconds each, so that the group can be run during a
quick 'make check'
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-img resize has some limitations with qcow2, but the user is only
told that "this image format does not support resize". Quite confusing,
so add some more detailed error_report() calls and change "this image
format" into "this image".
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Monitor operations that manipulate image files must not execute while a
background job (like image streaming) is in progress. This prevents
corruptions from happening when two pieces of code are manipulating the
image file without knowledge of each other.
The monitor "commit" command raises QERR_DEVICE_IN_USE when
bdrv_commit() returns -EBUSY but "commit all" has no error handling.
This is easy to fix, although note that we do not deliver a detailed
error about which device was busy in the "commit all" case.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The L2 table cache reduces QED metadata reads that would be required
when translating LBAs to offsets into the image file. Since requests
execute in parallel it is possible to share an L2 table between multiple
requests.
There is a potential data corruption issue when an in-use L2 table is
evicted from the cache because the following situation occurs:
1. An allocating write performs an update to L2 table "A".
2. Another request needs L2 table "B" and causes table "A" to be
evicted.
3. A new read request needs L2 table "A" but it is not cached.
As a result the L2 update from #1 can overlap with the L2 fetch from #3.
We must avoid doing overlapping I/O requests here since the worst case
outcome is that the L2 fetch completes before the L2 update and yields
stale data. In that case we would effectively discard the L2 update and
lose data clusters!
Thanks to Benoît Canet <benoit.canet@gmail.com> for extensive testing
and debugging which lead to discovery of this bug.
Reported-by: Benoît Canet <benoit.canet@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Tested-by: Benoît Canet <benoit.canet@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The topic of whether and by whom docs/tracing.txt is maintained was
brought up. It currently does not have an official maintainer.
Add it to the tracing section so that Stefan gets cc'ed on patches.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch corrects the configure's trace option in docs/tracing.txt.
Signed-off-by: Jun Koi <junkoi2004@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch makes trace_thread_create() to use its function arg to
initialize thread. The other choice is to make this a function to use
void arg, but i prefer this way.
Signed-off-by: Jun Koi <junkoi2004@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
SystemTap provides a "semaphore" that can optionally be tested before
executing a trace event. The purpose of this mechanism is to skip
expensive tracing code when the trace event is disabled.
For example, some applications may have trace events that format or
convert strings for trace events. This expensive processing should only
be done in the case where the trace event is enabled.
Since QEMU's generated trace events never have such special-purpose
code, there is no reason to add the semaphore check.
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Adds a 'TRACE_${NAME}_ENABLED' preprocessor define for each tracing event in
"trace.h".
This lets the user conditionally compile code with a relatively high execution
cost that is only necessary when producing the tracing information for an event
that is enabled.
Note that events using this define will probably have the "disable" property by
default, in order to avoid such costs on regular builds.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Most MemoryRegionOps already had the const attribute.
This patch adds it to the remaining ones.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
tcg_out_label is always called with a third argument of pointer type
which was casted to tcg_target_long.
These casts can be avoided by changing the prototype of tcg_out_label.
There was also a cast to long. For most hosts with
sizeof(long) == sizeof(tcg_target_long) == sizeof(void *) this did not
matter, but for w64 it was wrong. This is fixed now.
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
MinGW-w64 and some versions of MinGW32 don't provide libiberty.a,
so add this library only if it was found.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
MinGW-w64 already defines lseek and ftruncate (and uses the 64 bit
variants). The conditional compilation avoids redefinitions
(which would be wrong) and compiler warnings.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Commit 021ecd8b9d breaks the build for
PPC hosts because it uses uintptr_t without the necessary include file.
uintptr_t is defined in stdint.h, so add this include.
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Current code depends on variables defined in config-host.mak before it is
actually included.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Paul Brook <paul@codesourcery.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Too many VM kittens were killed since 7d03f82f81. Another one just died
under my fat fingers.
When you quit a kgdb session, does the Linux kernel power off? Or when
you terminate gdb attached to a hardware debugger, does your board
vanish in space? No.
So let's stop terminating QEMU when the gdbstub receives a kill commando
in system emulation mode. Real termination can still be achieved via
"monitor quit". We keep the behavior for user mode emulation which is
arguably more like a gdbserver scenario.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This was a long pending bug, now revealed by the assert in
phys_page_find that stumbled over the large page index returned by
cpu_get_phys_page_debug for NX-marked pages: We need to mask out NX and
all user-definable bits 52..62 from PDEs and the final PTE to avoid
corrupting physical addresses.
Reviewed-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* stefanha/trivial-patches:
configure: Quote the configure args printed in config.log
osdep: Remove local definition of macro offsetof
libcacard: Spelling and grammar fixes in documentation
Spelling fixes in comments (it's -> its)
vnc: Add break statement
libcacard: Use format specifier %u instead of %d for unsigned values
Fix sign of sscanf format specifiers
block/vmdk: Fix warning from splint (comparision of unsigned value)
qmp: Fix spelling fourty -> forty
qom: Fix spelling in documentation
sh7750: Remove redundant 'struct' from MemoryRegionOps
* qemu-kvm/uq/master:
kvm: fill in padding to help valgrind
kvm: x86: Add user space part for in-kernel i8254
kvm: Add kvm_has_pit_state2 helper
i8254: Open-code timer restore
i8254: Factor out base class for KVM reuse
* kraxel/usb.42:
xhci: fix port status
xhci: fix control xfers
usb: add shortcut for control transfers
usb-host: enable pipelineing for bulk endpoints.
usb: add pipelining option to usb endpoints
usb: queue can have async packets
uhci_fill_queue: zap debug printf
usb: add USB_RET_IOERROR
usb: return BABBLE rather then NAK when we receive too much data
usb-ehci: Cleanup itd error handling
usb-ehci: Fix and simplify nakcnt handling
usb-ehci: Remove dead nakcnt code
usb-ehci: Fix cerr tracking
usb-ehci: Any packet completion except for NAK should set the interrupt
usb-ehci: Rip the queues when the async or period schedule is halted
usb-ehci: Drop cached qhs when the doorbell gets rung
usb-ehci: always call ehci_queues_rip_unused for period queues
usb-ehci: split our qh queue into async and periodic queues
usb-ehci: Never follow table entries with the T-bit set
usb-redir: Set ep type and interface
VCARD_ATR_PREFIX is used as part of an array initializer so it should
not have () around it, so far this happened to work, but gcc-4.7 does
not like it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The return value of cpu_register_io_memory() is no longer used anywhere, so
we can remove it and all associated data and code.
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of indirecting via io_mem_region, dispatch directly
through the MemoryRegion obtained from the iotlb or phys_page_find().
Signed-off-by: Avi Kivity <avi@redhat.com>
get_page_addr_code() reads a code tlb entry, but interprets it as an
iotlb entry. This works by accident since the low bits of a RAM code
tlb entry are clear, and match a RAM iotlb entry. This accident is
about to unhappen, so fix the code to use an iotlb entry (using the
code entry with TLB_MMIO may fail if the page is a watchpoint).
Signed-off-by: Avi Kivity <avi@redhat.com>
Use the same mechanism we use for printing the configure command
line to config-host.mak to print it to config.log. This fixes a
bug where the config.log version didn't quote arguments with spaces.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The macro offsetof is defined in stddef.h. It is conforming to
the standards C89, C99 and POSIX.1-2001 (see man page), so it
is a sufficiently old standard.
Therefore chances are very high that QEMU never needs a local
definition of this macro.
osdep.h already includes stddef.h, so this patch simply removes
the unneeded code from the files configure and osdep.h.
If we ever need the local definition again, it should be added
to compiler.h (the macro is usually provided with the compiler,
it is not OS specific).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* it's -> its
* it's -> it is (that's no fix, but makes future checks easier)
* this functions -> this function
* replacable -> replaceable
* reader's -> readers
* logins into -> logs into
v2:
Also replace 'aid' by 'AID' (thanks to Peter Maydell for this hint).
v3:
Fix sentence (contributed by Alon Levy / Robert Relyea).
Cc: Alon Levy <alevy@redhat.com>
Cc: Robert Relyea <rrelyea@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* it's -> its (fixed for all files)
* dont -> don't (only fixed in a line which was touched by the previous fix)
* distrub -> disturb (fixed in the same line)
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This was not a bug, but it is not common practice to omit the break statement
from the last case statement before an empty default case.
Any change of the default case would introduce a bug.
This was reported as a warning by splint.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
splint reported warnings for those code statements.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
We'd like to store the section index in the iotlb, so we can't
adjust it before returning. Return an unadjusted section and
instead introduce section_addr(), which does the adjustment later.
Signed-off-by: Avi Kivity <avi@redhat.com>
All values read by sscanf are unsigned, so replace %d by %u.
This signed / unsigned mismatch was detected by splint.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This was found by codespell.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This fixes a new spelling issue which was detected by codespell.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The 'struct' is not needed, and all other MemoryRegionOps don't use it.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Don't signal port status change if the usb device isn't in attached
state. Happens with usb-host devices with the pass-through device
being plugged out at the host.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use the new, direct control transfer submission method instead of
bypassing the usb core by calling usb_device_handle_control directly.
The later fails for async control transfers.
This patch gets xhci + usb-host combo going.
