This patch fixes two mistakes in the interrupt logic.
First we only trigger single-queue or multi-queue interrupts if the status
register is set. This logic was already used for non multi-queue interrupts
but it also applies to multi-queue interrupts.
Secondly we need to lower the interrupts if the ISR isn't set. As part
of this we can remove the other interrupt lowering logic and consolidate
it inside gem_update_int_status().
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 438bcc014f8f8a2f8f68f322cb6a53f4c04688c2.1491947224.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Correct the buffer descriptor busy logic to work correctly when using
multiple queues.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 8a7e8059984e27d46a276a66299d035a0afd280f.1491947224.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Read the correct descriptor instead of hardcoding the first (q=0).
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 988b183dcf951856d8b3379f7e911ec95233bbf4.1491947224.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Disable debug output by default, the information were not needed for
release.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Cc: Leonid Bloch <leonid.bloch@ravellosystems.com>
Cc: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We call tap_enable() even if for multiqueue is not enabled. This is
wrong since it should be used for multiqueue codes to enable a
disabled queue. Fixing this by only calling this when multiqueue is
used.
Fixes: 16dbaf905b ("tap: support enabling or disabling a queue")
Reported-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Tested-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Change Makefile.objs to use CONFIG_XEN instead of CONFIG_XEN_BACKEND, so
that the Xen backends are only built for targets that support Xen.
Set CONFIG_XEN in the toplevel Makefile to ensure that files that are
built only once pick up Xen support properly.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
CC: pbonzini@redhat.com
CC: peter.maydell@linaro.org
CC: rth@twiddle.net
CC: stefanha@redhat.com
Message-Id: <1489694518-16978-1-git-send-email-sstabellini@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The FEC ethernet hardware module used on ColdFire SoC parts contains a
block of RAM used to maintain hardware counters. This block is accessible
via the usual FEC register address space. There is currently no support
for this in the QEMU mcf_fec driver.
Add support for storing a MIB RAM block, and provide register level
access to it. Also implement a basic set of stats collection functions
to populate MIB data fields.
This support tested running a Linux target and using the net-tools
"ethtool -S" option. As of linux-4.9 the kernels FEC driver makes
accesses to the MIB counters during its initialization (which it never
did before), and so this version of Linux will now fail with the QEMU
error:
qemu: hardware error: mcf_fec_read: Bad address 0x200
This MIB counter support fixes this problem.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
MSI-X has been disabled by the time the e1000e device is unrealized, hence
msix_uninit is never called. This causes the object to be leaked, which
shows up as a RAMBlock with empty name when attempting migration.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Fairly simple mechanical conversion of all fields.
TODO!!!!
The problem is vmxnet3-ring size/cell_size/next are declared as size_t
but written as 32bit.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The index's in the Vmxnet3Ring were migrated as 32bit ints
yet are declared as size_t's. They appear to be derived
from 32bit values loaded from guest memory, so actually
store them as that.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is a refactoring commit that does not change behavior.
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In case of VLAN stripping ETH header is stored in a
separate chunk and length of IOV should take this into
account.
This patch fixes checksum validation for RX packets
with VLAN header.
Devices affected by this problem: e1000e and vmxnet3.
Cc: qemu-stable@nongnu.org
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In case of VLAN stripping, ETH header put into a
separate buffer, therefore amont of data copied
from original IOV should be smaller.
Cc: qemu-stable@nongnu.org
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch fixed a problem that was introduced in commit eb700029.
When net_rx_pkt_attach_iovec() calls eth_strip_vlan()
this can result in pkt->ehdr_buf being overflowed, because
ehdr_buf is only sizeof(struct eth_header) bytes large
but eth_strip_vlan() can write
sizeof(struct eth_header) + sizeof(struct vlan_header)
bytes into it.
Devices affected by this problem: vmxnet3.
Cc: qemu-stable@nongnu.org
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This has been pointless since commit 605d52e62, which was a
search-and-replace, overlooked the redundancy.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The spapr-vlan device in QEMU has always presented it's MAC address in
the device tree as an 8 byte value, even though PAPR requires it to be
6 bytes. This is because, at the time, AIX required the value to be 8
bytes. However, modern versions of AIX support the (correct) 6
byte value so they no longer require the workaround.
It would be neatest to always provide a 6 byte value but that would
cause a problem with old Linux kernel ibmveth drivers, so the old 8
byte value is still presented when necessary.
Since commit 13f85203e (3.10, May 2013) the driver has been able to
handle 6 or 8 byte addresses so versions after that don't need to be
considered specially.
Drivers from kernels before that can also handle either type of
address, but not always:
* If the first byte's lowest bits are 10, the address must be 6 bytes.
* Otherwise, the address must be 8 bytes.
(The two bits in question are significant in a MAC address: they
indicate a locally-administered unicast address.)
So to maintain compatibility the old 8 byte value is presented when
the lowest two bits of the first byte are not 10.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The virtio-net change is necessary because it uses virtqueue_fill
and virtqueue_flush instead of the more convenient virtqueue_push.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This issue is like the issue in e1000 network card addressed in
this commit:
e1000: eliminate infinite loops on out-of-bounds transfer start.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
i.MX Fast Ethernet Controller uses buffer descriptors to manage
data flow to/fro receive & transmit queues. While transmitting
packets, it could continue to read buffer descriptors if a buffer
descriptor has length of zero and has crafted values in bd.flags.
Set an upper limit to number of buffer descriptors.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Because is_first is declared inside a loop, it is always true. The store
is dead, and so is the "else" branch of "if (is_first)". is_last is
okay though.
Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20170203160651.19917-5-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Merge fix against Halil's removal of the '_start' field in
VMSTATE_VBUFFER_MULTIPLY
The member VMStateField.start is used for two things, partial data
migration for VBUFFER data (basically provide migration for a
sub-buffer) and for locating next in QTAILQ.
The implementation of the VBUFFER feature is broken when VMSTATE_ALLOC
is used. This however goes unnoticed because actually partial migration
for VBUFFER is not used at all.
Let's consolidate the usage of VMStateField.start by removing support
for partial migration for VBUFFER.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170203175217.45562-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
msix_init() reports errors with error_report(), which is wrong when
it's used in realize(). The same issue was fixed for msi_init() in
commit 1108b2f. In order to make the API change as small as possible,
leave the return value check to later patch.
For some devices(like e1000e, vmxnet3, nvme) who won't fail because of
msix_init's failure, suppress the error report by passing NULL error
object.
Bonus: add comment for msix_init.
CC: Jiri Pirko <jiri@resnulli.us>
CC: Gerd Hoffmann <kraxel@redhat.com>
CC: Dmitry Fleytman <dmitry@daynix.com>
CC: Jason Wang <jasowang@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Hannes Reinecke <hare@suse.de>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are a number of unused trace events that
scripts/cleanup-trace-events.pl finds. The "hw/vfio/pci-quirks.c"
filename was typoed and "qapi/qapi-visit-core.c" was missing the qapi/
directory prefix.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170126171613.1399-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce rules in the top level Makefile that are able to generate
trace.[ch] files in every subdirectory which has a trace-events file.
The top level directory is handled specially, so instead of creating
trace.h, it creates trace-root.h. This allows sub-directories to
include the top level trace-root.h file, without ambiguity wrt to
the trace.g file in the current sub-dir.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170125161417.31949-7-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When the guest attempts to start an MII register
access via the MCTL register, clear the START bit,
so that when the guest reads it back the register
transaction will be signalled as having completed.
This avoids the guest spinning as it polls the
START bit waiting for it to clear (which it
previously never would).
The MII registers themselves still aren't implemented,
but at least we can avoid guests spending quite so much
time busy waiting.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1484938222-1423-1-git-send-email-peter.maydell@linaro.org
[PMM: expand commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The vmstate_pci_device and vmstate_pcie_devices differ
just in the size of one buffer; combine the two using a _TEST
macro.
I think this is safe as long as everywhere which currently
uses either of these two uses the right type.
One thing that concerns me is that some places use pci_device_load/save
which does some irq mangling, but others just use the VMSTATE_PCI_DEVICE
macro - how are they getting the same irq mangling?
This passes a smoke test migrate of:
./x86_64-softmmu/qemu-system-x86_64 -M pc,accel=kvm -m 1024
./littlefed20.img -device e1000e -device virtio-net -device
e1000 -device virtio-rng -device megasas -device megasas-gen2 -device
ioh3420 -device nec-usb-xhci
to an unmodified qemu.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20161214195829.18241-1-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Current migration code cannot handle some data structures such as
QTAILQ in qemu/queue.h. Here we extend the signatures of put/get
in VMStateInfo so that customized handling is supported. put now
will return int type.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Message-Id: <1484852453-12728-2-git-send-email-duanj@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJYgXzxAAoJEO8Ells5jWIRgtAIAKuFrOBE/xJnjd/45sVKcx2j
fsohKHF8T/eLmt5sw+MhGtnM/oRJRUX8kGpA9AU8m6TCSaTYh2tOKX5lwrykuAzk
feqz2pqZFwiLWs5Ro7qEQIhMkqtFetODvKd05qnKnAldj8SC45czKxdghmSP/B+w
4nnDEdqVqUuUseDCa1mW1b4f6g1N93LbgChK7lK9Xqg+OqeEbQ7nLgVvcWvN7+Ea
DfDKWP8tjQ5QhjzFWc4wa9/Tx+0HI7Dn57fv98XdJMvm1kt/MdnO7QKAXWmHH5s/
6DX+NHgN0ZAn85gv/ufq1F9C4TstbAoZA9EOGhoBJ5ww8mueARB3L2iCj+OcS9A=
=gkbh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Fri 20 Jan 2017 02:58:57 GMT
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
tap: fix memory leak on failure in net_init_tap()
hw/pci: use-after-free in pci_nic_init_nofail when nic device fails to initialize
hw/net/dp8393x: Avoid unintentional sign extensions on addresses
m68k: QOMify the MCF Fast Ethernet Controller device
net: optimize checksum computation
docs: Fix description of the sentence
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The dp8393x has several 32-bit values which are formed by concatenating
two 16 bit device register values. Attempting to do these inline
with ((s->reg[HI] << 16) | s->reg[LO]) can result in an unintended
sign extension because "x << 16" is of type 'int' even though s->reg
is unsigned, and so if the expression is used in a context where
it is cast to uint64_t the value is incorrectly sign-extended.
Fix this by using accessor functions with a uint32_t return type;
this also makes the code a bit easier to read.
This should fix Coverity issues 1307765, 1307766, 1307767, 1307768.
(To avoid having a ctda read function only used in a DPRINTF,
we move the DPRINTF down slightly so it can use the ttda function.)
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When running qemu-system-m68k with the "-net" parameter (for example
simply "-net nic -net user"), there is currently a confusing warning
message saying:
Warning: requested NIC (anonymous, model mcf_fec) was not created
(not supported by this machine?)
This seems to happen because the MCF NIC has never been adapted to
the currently expected QEMU device behavior. Thus let's QOMify the
NIC now to get rid of the warning message.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patches implements Device IOTLB support for vhost kernel. This is
done through:
1) switch to use dma helpers when map/unmap vrings from vhost codes
2) introduce a set of VhostOps to:
- setting up device IOTLB request callback
- processing device IOTLB request
- processing device IOTLB invalidation
2) kernel support for Device IOTLB API:
- allow vhost-net to query the IOMMU IOTLB entry through eventfd
- enable the ability for qemu to update a specified mapping of vhost
- through ioctl.
- enable the ability to invalidate a specified range of iova for the
device IOTLB of vhost through ioctl. In x86/intel_iommu case this is
triggered through iommu memory region notifier from device IOTLB
invalidation descriptor processing routine.
With all the above, kernel vhost_net can co-operate with userspace
IOMMU. For vhost-user, the support could be easily done on top by
implementing the VhostOps.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch allows advising guest with host MTU's by setting
host_mtu parameter.
If VIRTIO_NET_F_MTU has been successfully negotiated, MTU
value is passed to the backend.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Aaron Conole <aconole@redhat.com
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch provides a way for virtio-net to notify the
backend about the host MTU set by the user.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Aaron Conole <aconole@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1295637
Upon set_link monitor command or upon netdev deletion
virtio-net sends link down indication to the guest
and stops vhost if one is used.
Guest driver can still submit data for TX until it
recognizes link loss. If these packets not returned by
the host, the Windows guest will never be able to finish
disable/removal/shutdown.
Now each packet sent by guest after NIC indicated link
down will be completed immediately.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now, AER capa version is fixed to v2, if assigned device isn't v2,
then this value will be inconsistent between guest and host
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When user specify invalid value for property aer_log_max, device should
fail to create, and report appropriate message.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Current code that handles Tx buffer desciprtor ring scanning employs the
following algorithm:
1. Restore current buffer descriptor pointer from TBPTRn
2. Process current descriptor
3. If current descriptor has BD_WRAP flag set set current
descriptor pointer to start of the descriptor ring
4. If current descriptor points to start of the ring exit the
loop, otherwise increment current descriptor pointer and go
to #2
5. Store current descriptor in TBPTRn
The way the code is implemented results in buffer descriptor ring being
scanned starting at offset/descriptor #0. While covering 99% of the
cases, this algorithm becomes problematic for a number of edge cases.
Consider the following scenario: guest OS driver initializes descriptor
ring to N individual descriptors and starts sending data out. Depending
on the volume of traffic and probably guest OS driver implementation it
is possible that an edge case where a packet, spread across 2
descriptors is placed in descriptors N - 1 and 0 in that order(it is
easy to imagine similar examples involving more than 2 descriptors).
What happens then is aforementioned algorithm starts at descriptor 0,
sees a descriptor marked as BD_LAST, which it happily sends out as a
separate packet(very much malformed at this point) then the iteration
continues and the first part of the original packet is tacked to the
next transmission which ends up being bogus as well.
This behvaiour can be pretty reliably observed when scp'ing data from a
guest OS via TAP interface for files larger than 160K (every time for
700K+).
This patch changes the scanning algorithm to do the following:
1. Restore "current" buffer descriptor pointer from
TBPTRn
2. If "current" descriptor does not have BD_TX_READY set, goto #6
3. Process current descriptor
4. If "current" descriptor has BD_WRAP flag set "current"
descriptor pointer to start of the descriptor ring otherwise
set increment "current" by the size of one descriptor
5. Goto #1
6. Save "current" buffer descriptor in TBPTRn
This way we preserve the information about which descriptor was
processed last and always start where we left off avoiding the original
problem. On top of that, judging by the following excerpt from
MPC8548ERM (p. 14-48):
"... When the end of the TxBD ring is reached, eTSEC initializes TBPTRn
to the value in the corresponding TBASEn. The TBPTR register is
internally written by the eTSEC’s DMA controller during
transmission. The pointer increments by eight (bytes) each time a
descriptor is closed successfully by the eTSEC..."
revised algorithm might also a more correct way of emulating this aspect
of eTSEC peripheral.
Cc: Alexander Graf <agraf@suse.de>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: qemu-devel@nongnu.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
According to datasheet:
"[Bit 15 of Basic Mode Control Register] sets the status and control registers
of the PHY (register 0062-0074) in a default state. This bit is self-clearing.
1 = software reset; 0 = normal operation."
This fixes the netcard detection failure in Minoca OS.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Fix various small problems in hexdump code, such as:
- Reference to non-existing field etsec->nic->nc.name is replaced
with nc->name
- Type mismatch warnings
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Depending on QEMU network setup it is possible for us to receive a
complete Ethernet packet that is less 64 bytes long. One such example is
when QEMU is configured to use a standalone TAP device (not set to be a
part of any bridge) receives and ARP packet. In cases like that we need
to add more than just 4-bytes of CRC padding and ensure that our payload
is at least 60 bytes long, such that, when combined with CRC padding
bytes the resulting size is at least 802.3 minimum MTU bytes
long (64). Failing to do that results in code in etsec_walk_rx_ring()
setting BD_RX_SH which, in turn, makes corresponding Linux driver of
emulated host to reject buffer as a runt packet
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
ColdFire Fast Ethernet Controller uses a receive buffer size
register(EMRBR) to hold maximum size of all receive buffers.
It is set by a user before any operation. If it was set to be
zero, ColdFire emulator would go into an infinite loop while
receiving data in mcf_fec_receive. Add check to avoid it.
Reported-by: Wjjzhang <wjjzhang@tencent.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Lots of fixes all over the place.
Unfortunately, this does not yet fix a regression with vhost
introduced by the last pull, the issue is typically this error:
kvm_mem_ioeventfd_add: error adding ioeventfd: File exists
followed by QEMU aborting.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYKyfxAAoJECgfDbjSjVRpI4oH/2ZBpUxT/neq4ezX0bou5+1R
lQ1m0VI1JDbay5uYw0Z0rUY7aLP0kX2XLu2jNBZg7fGz3+BPhqAoEjkGdlUran79
fEnuYCvMMokQNzvMaHv+lFXO/MuEJthdDeUJyi4B0NU0sseutiz8opXuSWIC8Ncx
pyqRb8AfgKnsUSRizEVfiOWI1fk+zsTFbSyUwajwKi5E7RNEuHwLiqk5VFhzrrTX
nLwnUvlH7NrcDfliam9ziadhguo5cwCE4jBlMpeHnW5tGalNRulvF5EgwXybIdrU
JaR6lzQabOcoaAuJJ/dgo336B1Ef3JA/hogqfTW4unJGL5VVkWT0HLZ9OV42NEg=
=ibZy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost, pc, pci: documentation, fixes and cleanups
Lots of fixes all over the place.
Unfortunately, this does not yet fix a regression with vhost
introduced by the last pull, the issue is typically this error:
kvm_mem_ioeventfd_add: error adding ioeventfd: File exists
followed by QEMU aborting.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream: (28 commits)
docs: add PCIe devices placement guidelines
virtio: drop virtio_queue_get_ring_{size,addr}()
vhost: drop legacy vring layout bits
vhost: adapt vhost_verify_ring_mappings() to virtio 1 ring layout
nvdimm acpi: introduce NVDIMM_DSM_MEMORY_SIZE
nvdimm acpi: use aml_name_decl to define named object
nvdimm acpi: rename nvdimm_dsm_reserved_root
nvdimm acpi: fix two comments
nvdimm acpi: define DSM return codes
nvdimm acpi: rename nvdimm_acpi_hotplug
nvdimm acpi: cleanup nvdimm_build_fit
nvdimm acpi: rename nvdimm_plugged_device_list
docs: improve the doc of Read FIT method
nvdimm acpi: clean up nvdimm_build_acpi
pc: memhp: stop handling nvdimm hotplug in pc_dimm_unplug
pc: memhp: move nvdimm hotplug out of memory hotplug
nvdimm acpi: drop the lock of fit buffer
qdev: hotplug: drop HotplugHandler.post_plug callback
vhost: migration blocker only if shared log is used
virtio-net: mark VIRTIO_NET_F_GSO as legacy
...
Message-id: 1479237527-11846-1-git-send-email-mst@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio 1.0 spec says this is a legacy feature bit,
hide it from guests in modern mode.
Note: for cross-version migration compatibility,
we keep the bit set in host_features.
The result will be that a guest migrating cross-version
will see host features change under it.
As guests only seem to read it once, this should
not be an issue. Meanwhile, will work to fix guests to
ignore this bit in virtio1 mode, too.
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The function undoes the effect of virtqueue_pop and doesn't do anything
destructive or irreversible so virtqueue_unpop is a more fitting name.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1373816
qemu core dump happens during repetitive unpug-plug
with multiple queues and Windows RSS-capable guest.
If back-end delete requested during virtio-net device
initialization, driver still can try configure the device
for multiple queues. The virtio-net device is expected
to be removed as soon as the initialization is done.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
