vnc_server_cut_text_caps() is not guaranteed to be called only once.
If it called twice, we finally call notifier_list_add() twice with same
element. Which leads to loopback QLIST. So, on next
notifier_list_notify() we'll loop forever and QEMU stuck.
So, let's only register new notifier if it's not yet registered.
Note, that similar check is used in vdagent_chr_recv_caps() (before
call qemu_clipboard_peer_register()), and also before
qemu_clipboard_peer_unregister() call in vdagent_disconnect() and in
vnc_disconnect_finish().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211110103800.2266729-1-vsementsov@virtuozzo.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The dmabuf often becomes invalid right after unblocking pipeline
and graphic_hw_gl_flushed in case a new scanout blob is submitted
because the dmabuf associated with the current guest scanout is
freed after swapping.
So both graphic_hw_gl_block and graphic_hw_gl_flushed should be
executed after closing fence_fd for the current dmabuf.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20211121172237.14937-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
MacOS provides header files for curses 5.7 with support
for wide characters, but requires _XOPEN_SOURCE_EXTENDED=1
to activate that.
By default those old header files are used even if there
is a newer Homebrew installation of ncurses 6.2 available.
Change also the old macro definition of NCURSES_WIDECHAR
and set it to 1 like it is done in newer versions of
curses.h when _XOPEN_SOURCE_EXTENDED=1 is defined.
OpenBSD has the same version of ncurses and needs the same fix.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Brad Smith <brad@comstyle.com>
Message-Id: <20211117205355.1392292-1-sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 4872a023a5 ("ui/gtk-egl: guest fb texture needs
to be regenerated when reinitializing egl") we get on Ubuntu
18.04.4 LTS and Debian Buster (oldstable):
$ ../configure --enable-virglrenderer
[...]
ui/gtk-egl.c: In function 'gd_egl_refresh':
ui/gtk-egl.c:159:13: error: implicit declaration of function 'egl_dmabuf_release_texture' [-Werror=implicit-function-declaration]
159 | egl_dmabuf_release_texture(vc->gfx.guest_fb.dmabuf);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
ui/gtk-egl.c:159:13: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
ui/gtk-egl.c:159:13: error: nested extern declaration of 'egl_dmabuf_release_texture' [-Werror=nested-externs]
Fix by restricting the egl_dmabuf_release_texture() call to the
availability of the generic buffer management library (libgbm).
Fixes: 4872a023a5
Cc: Dongwon Kim <dongwon.kim@intel.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reported-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211108083129.1262040-1-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
eb_fb_blit should be able to blit partial image of guest display (blob res)
in case multiple displays are configured for the guest and they are set as extended-
desktop mode.
v2: egl_fb includes dmabuf info then make egl_fb_blit position and size
parameters programmed in dmabuf structure (previously position/size
parameters were given to egl_fb_blit separately)
(Vivek Kasireddy)
changed the commit message as there is no interface change to egl_fb_blit
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20211104065153.28897-6-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
gd_draw_event shouldn't try to repaint if surface does not exist
for the VC.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20211104065153.28897-4-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If guest fb is backed by dmabuf (blob-resource), the texture bound to the
old context needs to be recreated in case the egl is re-initialized (e.g.
new window for vc is created in case of detaching/reattaching of the tab)
v2: call egl_dmabuf_release_texutre instead of putting 0 to dmabuf->texture
(Vivek Kasireddy)
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20211104065153.28897-3-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Making the vc->gfx.ectx current before handling texture
associated with it
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20211104065153.28897-2-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
An old esurface should be destroyed and set to be NULL when doing
un-tab and re-tab so that a new esurface an context can be created
for the window widget that those will be bound to.
v2: enabling opengl specific routines only when CONFIG_OPENGL is set
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@intel.com>
Message-Id: <20211104065153.28897-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The test if the chardev frontend is connected in
kbd_put_keysym_console() is redundant, because the call
to qemu_chr_be_can_write() in kbd_send_chars() tests
the connected condition again.
Remove the redundant test whether the chardev frontend
is connected.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210916192239.18742-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
One of the two FIFO implementations QEMUFIFO and Fifo8 is
redundant. Replace QEMUFIFO with Fifo8.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210916192239.18742-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Any extra draw call for the same blob resource representing guest scanout
before the previous drawing is not finished can break synchronous draw
sequence. To prevent this, drawing is now done only once for each draw
submission (when draw_submitted == true).
v2:
- removed mutex
- updated commit msg
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20210924225105.24930-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is a bugfix that stretches all the way back to January 2020,
where I initially introduced this problem and potential solutions.
A quick recap of the issue: QEMU did not sync up with the monitors
refresh rate causing the VM to render frames that were NOT displayed
to the user. That "fix" allowed QEMU to obtain the screen refreshrate
information from the system using GDK API's and was for GTK only.
Well, I'm back with the same issue again. But this time on Wayland.
And I did NOT realize there was YET another screen refresh rate
function, this time for Wayland specifically. Thankfully the fix was
simple and without much hassle.
Thanks,
Nikola
PS: It seems that my patch has gone missing from the mailing list,
hence I'm sending it again. Sorry for any inconveniences.
Signed-off-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Message-Id: <20211024143110.704296-1-pavlica.nikola@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add meson feature options for Spice and Spice protocol, and move
detection logic out of configure.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211007102453.978041-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20211007130829.632254-13-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of immediately drawing and submitting, queue and wait
for the draw signal if the dmabuf submitted is a blob.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210914211837.3229977-5-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Create sync objects and fences only for dmabufs that are blobs. Once a
fence is created (after glFlush) and is signalled,
graphic_hw_gl_flushed() will be called and virtio-gpu cmd processing
will be resumed.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210914211837.3229977-4-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These egl helpers would be used for creating and waiting on
a sync object.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210914211837.3229977-3-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since the texture release mechanism is same for both gtk-egl
and gtk-glarea, move the helper from gtk-egl to common gtk
code so that it can be shared by both gtk backends.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210914211837.3229977-2-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The "python" variable is an external program and can be passed
directly to custom_target. This avoids the need to look it up
multiple times, which was previously silent but is now explicit
in recent Meson versions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current implementation lacks migration support. After migration,
vdagent support will be broken (even after a restart of the daemons).
Let's try to fix it in 6.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210805135715.857938-19-marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Rather than leaving the agent timing out or hanging, reply to it with an
empty result.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210805135715.857938-15-marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The clipboard unit now tracks the current clipboard grab, no need to
duplicate this work.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210805135715.857938-14-marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Avoid handlers being called with dangling pointers when the object is
freed.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210805135715.857938-10-marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
"info" was leaked when more than 10 entries.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210805135715.857938-2-marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Macro ERRP_GUARD() is only needed when we want to dereference @errp or
pass it to error_prepend() or error_append_hint(). Delete superfluous
ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210720125408.387910-15-armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
We did this with scripts/coccinelle/use-error_fatal.cocci before, in
commit 50beeb6809 and 007b06578a. This commit cleans up rarer
variations that don't seem worth matching with Coccinelle.
Cc: Thomas Huth <thuth@redhat.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210720125408.387910-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Setting environment variables can fail; check the return value
from g_setenv() and bail out if we couldn't set SDL_VIDEODRIVER.
Fixes: Coverity 1458798
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210809161424.32355-1-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 584af1f1d9 ("ui/gtk: add a keyboard fifo to the VTE
consoles") changed the VTE chardev backend code to rely on the
chr_accept_input() callback function. The code expects a
chr_accept_input() call whenever qemu_chr_be_can_write() bytes
were written. It turns out this is wrong. Some chardev
frontends only call this callback after can_write was 0.
Change the code to send data until the keyboard fifo is empty
or qemu_chr_be_can_write() returns 0.
Fixes: 584af1f1d9 ("ui/gtk: add a keyboard fifo to the VTE consoles")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210810063257.17411-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
docs/barrier.txt has a couple of TODO notes about things to be
implemented in this device; move them into a comment in the
source code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210727204112.12579-3-peter.maydell@linaro.org
