$(PYTHON) is a Make variable which is set by configure.
In all other places over the tree, .py files are run from
Makefiles using this variable, except of a single leftover
in hw/i386/Makefile.obj (and a nearby place in there uses
$(PYTHON) correctly). Fix this leftover too.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Luigi Rizzo <rizzo@iet.unipi.it>
Reviewed-by:: Stefan Weil <sw@weilnetz.de>
Commit 1d984a67a9 added the -B switch
unconditionally. This breaks Python versions before 2.6 which don't
support that switch.
Now configure adds -B only if it is accepted by the Python interpreter.
This modification introduces a small incompatibility because -B might now
also be added when configure was called with --python=PYTHON_INTERPRETER.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For now guest agent uses following command to shutdown system:
shutdown -P +0 "blabla"
but this syntax works only with shutdown command from systemd or upstart,
because SysV shutdown requires -h switch.
Following patch changes the command so it works with systemd, upstart and SysV
With upstart/systemd qga use one of thee commands, depending on 'mode' parameter:
shutdown -P +0 "..."
shutdown -H +0 "..."
shutdown -r +0 "..."
SysV equivalents for these are:
shutdown -h -P +0 "..."
shutdown -h -H +0 "..."
shutdown -h -r +0 "..."
and these retain their meaning with upstart/systemd.
According to FreeBSD manpages, shutdown does not accept -P and -H options. Commands should be:
shutdown -p +0 "..."
shutdown -h +0 "..."
shutdown -r +0 "..."
shutdown in Solaris does not accept any of -hHpPr and does not accept time in "+0" format
Signed-off-by: Michael Avdienko <whitearchey@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If an explicit driver option is present, but doesn't specify a valid
driver, then bdrv_open() should fail instead of probing the format.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
There are a number of contributors who maintain block drivers (image
formats and protocols). They should be listed in the MAINTAINERS file
so that get_maintainer.pl lists them.
Note that commits are still merged through Kevin or Stefan's block tree
but the block driver sub-maintainers are usually the ones to review
patches.
Acked-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Acked-by: Stefan Weil <sw@weilnetz.de>
Acked-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Jeff Cody <jcody@redhat.com>
Acked-by: Anthony Liguori <aliguori@amazon.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch moves ret assignment after reporting original error.
We were lucky to pass qemu-iotests 048 (qemu-img compare case) but when
I tried to run with TEST_DIR=/tmp (tmpfs), it fails with a "wrong"
mismatch offset. This fixes two bugs.
In the first if branch, setting ret to 1 before using it makes dead code
in the next line: pnum is never added to mismatch offset even if ret was
0.
In the other if branch, currently the output error is always -4:
strerror(-4) -> Unknown error -4
Added regression test in case 048.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
In case the smc91c111 interface signals that it cannot receive more
packets the packets are queued and further reception will be disabled.
In case the interface is again ready to receive packets notify the upper
layer.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
if multiple sectors spanning multiple clusters are read the
function count_contiguous_clusters should ensure that the
cluster type should not change between the clusters.
Especially the for-loop should break when we have one
or more normal clusters followed by a compressed cluster.
Unfortunately the wrong macro was used in the mask to
compare the flags.
This was discovered while debugging a data corruption
issue when converting a compressed qcow2 image to raw.
qemu-img reads 2MB chunks which span multiple clusters.
CC: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently we have three QemuOptsList (qemu_common_drive_opts,
qemu_legacy_drive_opts, and qemu_drive_opts), only qemu_drive_opts
is added to vm_config_groups[].
This patch changes query-command-line-options to access three local
QemuOptsLists for drive option, and merge the description items
together.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new test case in file 041 for mirroring unbacked images in
"absolute-paths" mode. This should work, if possible, but most
importantly, qemu should never crash.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It should be possible to execute the QMP "drive-mirror" command in
"none" sync mode and "absolute-paths" mode even for block devices
lacking a backing file.
"absolute-paths" does in fact not require a backing file to be present,
as can be seen from the "top" sync mode code path. "top" basically
states that the device should indeed have a backing file - however, the
current code catches the case if it doesn't and then simply treats it as
"full" sync mode, creating a target image without a backing file (in
"absolute-paths" mode). Thus, "absolute-paths" does not imply the target
file must indeed have a backing file.
Therefore, the target file may be left unbacked in case of "none" sync
mode as well, if the specified device is not backed either. Currently,
qemu will crash trying to dereference the backing file pointer since it
assumes that it will always be non-NULL in that case ("none" with
"absolute-paths").
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the NewImageMode is "absolute-paths" but no backing file is available
(e.g., when mirroring a device with an unbacked image), the target image
will not be backed either. This patch updates the documentation in
qapi-schema.json accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If backing file doesn't exist, the error message is confusing and
misleading:
$ qemu /tmp/a.qcow2
qemu: could not open disk image /tmp/a.qcow2: Could not open file: No
such file or directory
But...
$ ls /tmp/a.qcow2
/tmp/a.qcow2
$ qemu-img info /tmp/a.qcow2
image: /tmp/a.qcow2
file format: qcow2
virtual size: 8.0G (8589934592 bytes)
disk size: 196K
cluster_size: 65536
backing file: /tmp/b.qcow2
Because...
$ ls /tmp/b.qcow2
ls: cannot access /tmp/b.qcow2: No such file or directory
This is not intuitive. It's better to have the missing file's name in
the error message. With this patch:
$ qemu-io -c 'read 0 512' /tmp/a.qcow2
qemu-io: can't open device /tmp/a.qcow2: Could not open backing
file: Could not open '/stor/vm/arch.raw': No such file or directory
no file open, try 'help open'
Which is a little bit better.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The BIOS that we ship in 1.7 does not use pci info
from host and so far isn't going to use it.
Taking in account problems it caused see 9604f70fdf and
to avoid future incompatibility issues, it's safest to
disable that interface by default for all machine types
including 1.7 as it was never exposed/used by guest.
And properly remove/cleanup it during 1.8 development cycle.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# By Luiz Capitulino (1) and Richard Henderson (1)
# Via Luiz Capitulino
* luiz/queue/qmp:
MAINTAINERS: add git tree info for HMP, QMP and QAPI
Adjust qapi-visit for python-2.4.3
Message-id: 1384281985-11100-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This reverts PCI master abort support - we'll want it
eventually but it exposes too many core bugs to be safe for 1.7.
This also reverts a recent exec.c change that was an
attempt to work-around some of these core bugs.
Also included are small fixes in pc and virtio,
and a core loader fix for PPC bamboo.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSf4ZyAAoJECgfDbjSjVRp9DIIAK7yEMa9ie5n3sInKH+xHT3R
Sf4uErqx55WfT/54dnLJPrs7DTfXblW+Qjnq/7RuaoJ32Dfshgxz64mPF+Lm2s3+
ghjdQrKo2YkdSbbxy+AnBNO4eHMSeUs/rM2yIfi7FZU0nwC7wNe1QpAN3UjM4yAF
5vE18xZE0Rxz/prXgofLtPHa1czvGPFk1qbS7Vag6HCSkfEI4N1Jxf9otDRV6KZP
9hX0kTvZyOKdbhccN05G4VCWwx5YUrpBsNSoph4Jx1aokEBoucr4sgE1FPDp0H9H
bJqDaAM2G5HNrDtIiDov5WOzRNT/ly011Q4mcaQh3va0pqUXttKCHgE1KRgn76I=
=iMNW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci, pc, virtio bug fixes
This reverts PCI master abort support - we'll want it
eventually but it exposes too many core bugs to be safe for 1.7.
This also reverts a recent exec.c change that was an
attempt to work-around some of these core bugs.
Also included are small fixes in pc and virtio,
and a core loader fix for PPC bamboo.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 10 Nov 2013 05:13:22 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (3) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
Revert "exec: limit system memory size"
Revert "hw/pci: partially handle pci master abort"
loader: drop return value for rom_add_blob_fixed
acpi-build: disable with -no-acpi
virtio-net: only delete bh that existed
Fix pc migration from qemu <= 1.5
Message-id: 1384159176-31662-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Dmitry Fleytman (1) and others
# Via Stefan Hajnoczi
* stefanha/net:
virtio-net: broken RX filtering logic fixed
net: fix qemu_flush_queued_packets() in presence of a hub
net: disallow to specify multicast MAC address
Message-id: 1383928804-28866-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Jeff Cody (26) and others
# Via Stefan Hajnoczi
* stefanha/block: (37 commits)
block: Round up total_sectors
block: vhdx qemu-iotest - log replay of data sector
block: qemu-iotests for vhdx, add write test support
block: vhdx - update _make_test_img() to filter out vhdx options
block: vhdx - add .bdrv_create() support
block: vhdx - fix comment typos in header, fix incorrect struct fields
block: vhdx - break out code operations to functions
block: vhdx - move more endian translations to vhdx-endian.c
block: vhdx - remove BAT file offset bit shifting
block: vhdx write support
block: vhdx - add log write support
block: vhdx - add region overlap detection for image files
block: vhdx - log parsing, replay, and flush support
block: vhdx code movement - move vhdx_close() above vhdx_open()
block: vhdx - update log guid in header, and first write tracker
block: vhdx - break endian translation functions out
block: vhdx - log support struct and defines
block: vhdx code movement - VHDXMetadataEntries and BDRVVHDXState to header.
block: vhdx - add header update capability.
block: vhdx - minor comments and typo correction.
...
Message-id: 1383905551-16411-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
- add missing debug feature to dc233c xtensa core;
- fix qemu abort caused by gdb attempt to invalidate a breakpoint by
virtual address for which there's no mapping.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=6DLv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'filippov/tags/20131108-xtensa' into staging
Two small fixes for 1.7:
- add missing debug feature to dc233c xtensa core;
- fix qemu abort caused by gdb attempt to invalidate a breakpoint by
virtual address for which there's no mapping.
# gpg: Signature made Thu 07 Nov 2013 09:32:19 PM PST using RSA key ID F83FA044
# gpg: Can't check signature: public key not found
# By Max Filippov
# Via Max Filippov
* filippov/tags/20131108-xtensa:
target-xtensa: add missing DEBUG section to dc233c config
exec: fix breakpoint_invalidate when pc may not be translated
Message-id: 1383889643-21621-1-git-send-email-jcmvbkbc@gmail.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Gerd Hoffmann
# Via Gerd Hoffmann
* kraxel/audio.3:
ossaudio: check for oss support in oss_audio_init
Revert "ossaudio: do not enable by default"
Message-id: 1383823947-5132-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Stefan Weil
# Via Stefan Weil
* sweil/mingw:
linux-user: Fix stat64 syscall for SPARC64
configure: Add config.status to recreate the current configuration
nsis: Improved support for parallel installation of 32 and 64 bit code
Message-id: 1383804909-376-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
The local function console_print_text_attributes is no longer used since
commit 7d6ba01c37.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
While MinGW-w64 can compile the qga code, MinGW from Debian lenny
(gcc-mingw32 4.4.2-3) shows these errors:
In file included from qga/vss-win32.c:17:
qga/vss-win32/requester.h:31:
error: expected »=«, »,«, »;«, »asm« or »__attribute__« before »requester_init«
qga/vss-win32/requester.h:32:
error: expected »=«, »,«, »;«, »asm« or »__attribute__« before »requester_deinit«
The macro STDAPI is unknown, so add the missing include file which
defines it.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This adds a build matrix definition for travis-ci.org continuous
integration service. It is usable on any public repository hosted on
GitHub. Once you have created an account signed into Travis you can
enable it on selected projects via travis-ci.org/profile. Alternatively
you can configure the service hooks on GitHub via the repository
Settings tab,then Service Hooks and selecting Travis.
Once setup Travis will automatically test every push as well as any pull
requests submitted to that repository.
The build matrix is currently split by target architecture (see TARGETS
environment variable) because a full build of QEMU can take some time.
This way you get quick feedback for any obvious errors. The additional
environment variables exist to allow additional builds to tweak the
environment. These are:
EXTRA_CONFIG - extra terms passed to configure
EXTRA_PKGS - extra dev packages to install
TEST_CMD - default "make check", can be overridden
I've confined the additional stuff to x86/x86_64 for convenience.
As Travis supports clang the main builds are done twice (once for gcc
and once for clang). However clang is disabled for the debug/trace
builds for the purposes of brevity.
Other wrinkles:
* The lttng user-space tracing back-end is disabled
(it is currently horribly broken)
* The ftrace back-end doesn't run "make check"
(it requires a mounted debugfs to work)
* There are two debug enabled build (with and without TCG interpreter)
Signed-off-by: Alex Bennée <alex@bennee.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Using multiple calls to error_report here means every line is
prefaced with the (potentially long) pci-assign command line
arguments.
Use a single error_printf to preserve the intended formatting.
Since this code path is always preceded by an error_report call,
we don't lose the command line reporting.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The following error occurs when building with no graphic output support:
vl.c: In function ‘main’:
vl.c:2829:19: error: variable ‘ds’ set but not used [-Werror=unused-but-set-variable]
DisplayState *ds;
^
cc1: all warnings being treated as errors
To reproduce this issue, just run:
$ ./configure \
--disable-curses \
--disable-sdl \
--disable-cocoa \
--disable-gtk \
--disable-vnc \
--enable-werror
$ make vl.o
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch adds all missing characters used in regional keymap
files which already exist in QEMU. I checked for the missing
characters by going through all of the keymaps and matching that
with records in vnc_keysym.h. If the key wasn't found I looked
it up in libxkbcommon library [1]. If I understood it correctly
this is also the same place where most of the keymaps were
exported from according to the comment on the first line in those
files. I was able to find all symbols except "quotebl" used
in Netherland keymap.
I tested this update with Czech keyboard by myself. I also asked
Matej Serc to test Slovenian keyboard layout - he reported problems
with it few days ago on this mailing list. Both layouts seems
to work fine. I wasn't able to test the remaining layouts but
since this change doesn't modify any existing symbols, just adds
new ones, I don't expect any sideeffects.
[1] http://cgit.freedesktop.org/xorg/lib/libxkbcommon
Signed-off-by: Jan Krupa <jkrupa@suse.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch adds support for Unicode symbols in keymap files. This
feature was already used in some keyboard layouts in QEMU generated
from XKB (e.g. Arabic) but it wasn't implemented in QEMU source code.
There is no need for check of validity of the hex string after U character
because strtol returns 0 in case the conversion was unsuccessful.
Signed-off-by: Jan Krupa <jkrupa@suse.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch adds Czech keyboard layout to available keymap files
and Makefile.
Signed-off-by: Jan Krupa <jkrupa@suse.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch adds missing Czech characters to the VNC keysym table.
Signed-off-by: Jan Krupa <jkrupa@suse.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We say we support python 2.4, but python 2.4.3 does not
support the "expr if test else expr" syntax used here.
This allows QEMU to compile on RHEL 5.3, the last release for ia64.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This reverts commit 818f86b883.
This was a work-around for bugs elsewhere in the system,
exposed by commit a53ae8e934:
"hw/pci: partially handle pci master abort"
since that's reverted now, the work-around is not required for 1.7
anymore.
The proper fix is supporting full 64 bit addresses in the radix tree.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Marcel Apfelbaum <marcel.a@redhat.com>
This reverts commit a53ae8e934.
The patch being reverted introduced a low-priority memory region
covering all 64 bit pci address space. This exposed the following bugs
elsewhere in the code:
1. Some memory regions have INT64_MAX size, where the
intent was all 64 bit address space.
This results in a sub-page region, should be UINT64_MAX.
2. page table rendering in exec.c ignores physical address bits
above TARGET_PHYS_ADDR_SPACE_BITS.
Access outside this range (e.g. from device DMA, or gdb stub)
ends up with a wrong region. Registering a region outside this
range leads to page table corruption.
3. Some regions overlap PCI hole and have same priority.
This only works as long as no device uses the overlapping address.
It doesn't look like we can resolve all issues in time for 1.7.
Let's fix the bugs first and apply afterwards for 1.8.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
rom_add_blob never fails, and neither does rom_add_blob_fixed,
so there's no need to return value from it.
In fact, rom_add_blob_fixed was erroneously returning -1 unconditionally
which made the only system that checked the return value -M bamboo fail
to start.
Drop the return value and drop checks from ppc440_bamboo to
fix this failure.
Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU will currently crash if started with -no-acpi flag
since acpi build code probes the PM device which isn't present
in this configuration.
To fix, don't expose ACPI tables to guest when acpi has been
disabled from command line.
Fixes LP# 1248854
https://bugs.launchpad.net/qemu/+bug/1248854
Reported-by: chao zhou <chao.zhou@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
We delete without check whether it existed during exit. This will lead NULL
pointer deference since it was created conditionally depends on guest driver
status and features. So add a check of existence before trying to delete it.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The following commit introduced a migration incompatibility:
commit 568f0690fd
Author: David Gibson <david@gibson.dropbear.id.au>
Date: Thu Jun 6 18:48:49 2013 +1000
pci: Replace pci_find_domain() with more general pci_root_bus_path()
The issue is that i440fx savevm idstr went from 0000:00:00.0/I440FX to
0000:00.0/I440FX. Unfortunately we are stuck with the breakage for
1.6 machine types.
Add a compat property to maintain the busted idstr for the 1.6 machine
types, but revert to the old style format for 1.7+, and <= 1.5.
Tested with migration from qemu 1.5, qemu 1.6, and qemu.git.
Cc: qemu-stable@nongnu.org
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Upon processing of VIRTIO_NET_CTRL_MAC_TABLE_SET command
multicast list overwrites unicast list in mac_table.
This leads to broken logic for both unicast and multicast RX filtering.
Signed-off-by: Dmitry Fleytman <dfleytma@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Do not return after net_hub_flush(). Always flush callee network client
incoming queue.
Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[Assigning a multicast MAC address to a NIC leads to confusing behavior.
Reject multicast MAC addresses so users are alerted to their error
straight away.
The "net/eth.h" in6_addr rename prevents a name collision with
<netinet/in.h> on Linux.
-- Stefan]
Signed-off-by: Dmitry V. Krivenok <krivenok.dmitry@gmail.com>
Reviewed-by: Amos Kong <kongjianjun@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since b94a2610, bdrv_getlength() is omitted when probing image. VMDK
monolithicFlat is broken by that because a file < 512 bytes can't be
read with its total_sectors truncated to 0. This patch round up the size
to BDRV_SECTOR_SIZE, when a image size is not sector aligned.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes qemu abort with the following message:
include/qemu/int128.h:22: int128_get64: Assertion `!a.hi' failed.
which happens due to attempt to invalidate breakpoint by virtual address
for which get_phys_page_debug couldn't find mapping.
For more details see
http://lists.nongnu.org/archive/html/qemu-devel/2013-09/msg04582.html
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
SLOF git commit is e2e8ac901e617573ea383f9cffd136146d0675a4
The main changes are:
* fixed bug with not passing arguments from -append
* client-architecture-support hypercall
* netboot
* USB stack fixes
The full list of changes:
> client-architecture-support: fix wrong version read
> client-architecture-support: fix redundant stack drop
> Update device tree returned by CAS hypercall
> fdt: introduce fdt-init
> Add ibm,client-architecture-support method
> Kernel parameter passed from qemu commandline ignored
> Allow more than one client to open net devices simultaneously
> ci: add missing close in else condition
> Add GPT support
> pci: fix interrupt-map for bridges
> usb-ohci: preserve the toggleCarry bit in ED
> usb-ohci: done_head processing fixes
> usb-ohci: update init and rationalize timings
> usb-msc: handle stall and other fixes
> scsi: make probe more error resilient
> usb-core: Add CLEAR FEATURE api
> Implement range allocator
> Remove bcm57xx network driver as module
> Remove e1000 network driver as module
> Remove virtio-net network driver as module
> Remove veth network driver as module
> Add missing close-dev in ping
> Remove lodable network driver modules and related functions
> Add bcm57xx network driver in libbcm
> Add e1000 network driver in libe1k
> Add virtio-net driver in libvirtio
> Add veth driver in libveth
> Get MAC address for client interface module
> Add SLOF usleep wrapper
> Add SLOF pci wrapper functions
> Fix 'canon' client interface
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
