Biosbits avocado tests on gitlab has thus far been disabled because some
packages needed by this test was missing in the container images used by gitlab
CI. These packages have now been added with the commit:
da9000784c ("tests/lcitool: Add mtools and xorriso and remove genisoimage as dependencies")
Therefore, this change enables bits avocado test on gitlab.
At the same time, the bits cleanup code has also been made more robust with
this change.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230517065357.5614-1-anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The error message is bad when the section is untagged. For instance,
test case doc-interleaved-section produces "'@foobar:' can't follow
'Note' section", which is okay, but if we drop the "Note:" tag, we get
"'@foobar:' can't follow 'None' section, which is bad.
Change the error message to "description of '@foobar:' follows a
section".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230510141637.3685080-1-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[Conflict with commit 3e32dca3f0 resolved]
This way QEMU won't complain in case the VGA card or the NIC device
are not available in the binary, thus it won't spoil the output
and the test then passes with such QEMU binaries that have a limited
configuration, too.
Message-Id: <20230512124033.502654-18-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These tests rely on a default NIC to be available. Skip them if we
used the "--without-default-devices" configure option.
Message-Id: <20230512124033.502654-17-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The devices might not have been compiled into the QEMU binary, so we
have to check before we can use them.
Message-Id: <20230512124033.502654-16-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
virtio-balloon-ccw is already tested in the device-plug-test,
virtio-blk-ccw is already tested in cdrom-test, and virtio-net-ccw
is already tested in the pxe-test, so there is not much point
in doing "nop" tests here again.
Message-Id: <20230512124033.502654-15-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's possible to disable virtio-scsi and virtio-blk in the binaries,
so we must not run the corresponding tests if these devices are missing.
Message-Id: <20230512124033.502654-14-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The test is already fenced with CONFIG_USB_UHCI in meson.build, but in
case we build the ppc or mips targets in parallel, this config switch
is still set in "config_all_devices" and thus the test is still run.
Thus we need an explicit additional check here before adding the tests
to the test plan.
Message-Id: <20230512124033.502654-13-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The USB controllers might not be available in the QEMU binary
(e.g. when using the "--without-default-devices" configure switch),
so we have to check whether the devices can be used before running
the related test.
Message-Id: <20230512124033.502654-12-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
CXL volatile memory support
More memslots for vhost-user on x86 and ARM.
vIOMMU support for vhost-vdpa
pcie-to-pci bridge can now be compiled out
MADT revision bumped to 3
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmRniWoPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpN4MH/RqdvHmujrjvjzXbbN/gq87Njp+kQLKEooIE
ZkqdNaVUE6vjCH8iU+chjsxt4VSquSjOL9CWWrYefEIeqCFLWsuXSAY0VDAbY67x
+aes51tTYILVsx7fbb+T5mJKRgVuWW4C5KaGeQ1djSexy42nvplZUJdIJUhZr0t9
dzzOsD+mezHS7Xu2QOzSfl5QQRuOVVJnjJXkqJG/yRvHrZM5aTolatr/X7jNGedm
4oyMsVMaAcQ+dnEQigRJodf/MpFfs9DfNZAH55VwwQWsNT0t0ueD0xigR203jjaE
mJJJipAqetFax2JjC7QMXWf+LR36BnL/0/xH+x/BWb0FI42wr0I=
=ajmR
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes, features, cleanups
CXL volatile memory support
More memslots for vhost-user on x86 and ARM.
vIOMMU support for vhost-vdpa
pcie-to-pci bridge can now be compiled out
MADT revision bumped to 3
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmRniWoPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpN4MH/RqdvHmujrjvjzXbbN/gq87Njp+kQLKEooIE
# ZkqdNaVUE6vjCH8iU+chjsxt4VSquSjOL9CWWrYefEIeqCFLWsuXSAY0VDAbY67x
# +aes51tTYILVsx7fbb+T5mJKRgVuWW4C5KaGeQ1djSexy42nvplZUJdIJUhZr0t9
# dzzOsD+mezHS7Xu2QOzSfl5QQRuOVVJnjJXkqJG/yRvHrZM5aTolatr/X7jNGedm
# 4oyMsVMaAcQ+dnEQigRJodf/MpFfs9DfNZAH55VwwQWsNT0t0ueD0xigR203jjaE
# mJJJipAqetFax2JjC7QMXWf+LR36BnL/0/xH+x/BWb0FI42wr0I=
# =ajmR
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 19 May 2023 07:36:26 AM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (40 commits)
hw/i386/pc: No need for rtc_state to be an out-parameter
hw/i386/pc: Create RTC controllers in south bridges
hw/cxl: Introduce cxl_device_get_timestamp() utility function
hw/cxl: rename mailbox return code type from ret_code to CXLRetCode
hw/pci-bridge: make building pcie-to-pci bridge configurable
virtio-pci: add handling of PCI ATS and Device-TLB enable/disable
hw/pci-host/pam: Make init_pam() usage more readable
hw/i386/pc: Initialize ram_memory variable directly
hw/i386/pc_{q35,piix}: Minimize usage of get_system_memory()
hw/i386/pc_{q35,piix}: Reuse MachineClass::desc as SMB product name
hw/i386/pc_q35: Reuse machine parameter
hw/pci-host/q35: Inline sysbus_add_io()
hw/pci-host/i440fx: Inline sysbus_add_io()
vhost-vdpa: Add support for vIOMMU.
vhost-vdpa: Add check for full 64-bit in region delete
vhost_vdpa: fix the input in trace_vhost_vdpa_listener_region_del()
vhost: expose function vhost_dev_has_iommu()
virtio-crypto: fix NULL pointer dereference in virtio_crypto_free_request
virtio-net: not enable vq reset feature unconditionally
vhost-user: Remove acpi-specific memslot limit
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This tests exercises graph locking, draining, and graph modifications
with AioContext switches a lot. Amongst others, it serves as a
regression test for bdrv_graph_wrlock() deadlocking because it is called
with a locked AioContext and for AioContext handling in the NBD server.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230517152834.277483-4-kwolf@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230502184134.534703-3-stefanha@redhat.com>
[kwolf: Restrict to CONFIG_POSIX, Windows doesn't support polling]
Tested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Skip TestBlockdevReopen.test_insert_compress_filter() if the 'compress'
driver isn't available.
In order to make the test succeed when the case is skipped, we also need
to remove any output from it (which would be missing in the case where
we skip it). This is done by replacing qemu_io_log() with qemu_io(). In
case of failure, qemu_io() raises an exception with the output of the
qemu-io binary in its message, so we don't actually lose anything.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230511143801.255021-1-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_unref() is a no_coroutine_fn, so calling it from coroutine context
is invalid. Use bdrv_co_unref() instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-7-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If we take a reader lock, we can't call any functions that take a writer
lock internally without causing deadlocks once the reader lock is
actually enforced in the main thread, too. Take the reader lock only
where it is actually needed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-6-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Following the guidelines in tests/qtest/bios-tables-test.c,
set up bios-tables-test-allowed-diff.h to ignore the
imminent changes to the APIC tables, per step 2.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Message-Id: <20230517162545.2191-2-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
This commit enables each CXL Type-3 device to contain one volatile
memory region and one persistent region.
Two new properties have been added to cxl-type3 device initialization:
[volatile-memdev] and [persistent-memdev]
The existing [memdev] property has been deprecated and will default the
memory region to a persistent memory region (although a user may assign
the region to a ram or file backed region). It cannot be used in
combination with the new [persistent-memdev] property.
Partitioning volatile memory from persistent memory is not yet supported.
Volatile memory is mapped at DPA(0x0), while Persistent memory is mapped
at DPA(vmem->size), per CXL Spec 8.2.9.8.2.0 - Get Partition Info.
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230421160827.2227-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Defines are starting to exceed line length limits, align them for
cleanliness before making modifications.
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230421160827.2227-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmRmgQgACgkQewJE+xLe
RCJLtAf8C/0kQRa4mjnbsztXuFyca53UxAv3BSBEDla4ZcMfFBoVJsGB3OP7IPXd
KBQpkLyJAVye9idex5xqdp9nIfoGKDTsc6YtCfGujZ17cDpzLRDpHdUTex8PcZYK
wpfM3hoVJsYRBMsojZ4OaxatjFQ+FWzrIH6FcgH086Q8TH4w9dZLNEJzHC4lOj0s
7qOuw2tgm+vOVlzsk/fv6/YD/BTeZTON3jgTPvAnvdRLb/482UpM9JkJ8E4rbte3
Ss5PUK8QTQHU0yamspGy/PfsYxiptM+jIWGd836fAGzwF12Ug27mSc1enndRtQVW
pQTdnOnWuuRzOwEpd7x3xh9upACm4g==
=1CyJ
-----END PGP SIGNATURE-----
Merge tag 'pull-hex-20230518-1' of https://github.com/quic/qemu into staging
Hexagon update
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmRmgQgACgkQewJE+xLe
# RCJLtAf8C/0kQRa4mjnbsztXuFyca53UxAv3BSBEDla4ZcMfFBoVJsGB3OP7IPXd
# KBQpkLyJAVye9idex5xqdp9nIfoGKDTsc6YtCfGujZ17cDpzLRDpHdUTex8PcZYK
# wpfM3hoVJsYRBMsojZ4OaxatjFQ+FWzrIH6FcgH086Q8TH4w9dZLNEJzHC4lOj0s
# 7qOuw2tgm+vOVlzsk/fv6/YD/BTeZTON3jgTPvAnvdRLb/482UpM9JkJ8E4rbte3
# Ss5PUK8QTQHU0yamspGy/PfsYxiptM+jIWGd836fAGzwF12Ug27mSc1enndRtQVW
# pQTdnOnWuuRzOwEpd7x3xh9upACm4g==
# =1CyJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 May 2023 12:48:24 PM PDT
# gpg: using RSA key 3635C788CE62B91FD4C59AB47B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* tag 'pull-hex-20230518-1' of https://github.com/quic/qemu: (44 commits)
Hexagon (linux-user/hexagon): handle breakpoints
Hexagon (gdbstub): add HVX support
Hexagon (gdbstub): fix p3:0 read and write via stub
Hexagon: add core gdbstub xml data for LLDB
gdbstub: add test for untimely stop-reply packets
gdbstub: only send stop-reply packets when allowed to
Remove test_vshuff from hvx_misc tests
Hexagon (decode): look for pkts with multiple insns at the same slot
Hexagon (iclass): update J4_hintjumpr slot constraints
Hexagon: append eflags to unknown cpu model string
Hexagon: list available CPUs with `-cpu help`
Hexagon (target/hexagon/*.py): raise exception on reg parsing error
target/hexagon: fix = vs. == mishap
Hexagon (target/hexagon) Additional instructions handled by idef-parser
Hexagon (target/hexagon) Move items to DisasContext
Hexagon (target/hexagon) Move pkt_has_store_s1 to DisasContext
Hexagon (target/hexagon) Move pred_written to DisasContext
Hexagon (target/hexagon) Move new_pred_value to DisasContext
Hexagon (target/hexagon) Move new_value to DisasContext
Hexagon (target/hexagon) Make special new_value for USR
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In the previous commit, we modified gdbstub.c to only send stop-reply
packets as a response to GDB commands that accept it. Now, let's add a
test for this intended behavior. Running this test before the fix from
the previous commit fails as QEMU sends a stop-reply packet
asynchronously, when GDB was in fact waiting an ACK.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <a30d93b9a8d66e9d9294354cfa2fc3af35f00202.1683214375.git.quic_mathbern@quicinc.com>
test_vshuff checks that the vshuff instruction works correctly when
both vector registers are the same. Using vshuff in this way is
undefined and will be rejected by the compiler in a future version of
the toolchain.
Signed-off-by: Marco Liebel <quic_mliebel@quicinc.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20230509184231.2467626-1-quic_mliebel@quicinc.com>
Each slot in a packet can be assigned to at most one instruction.
Although the assembler generally ought to enforce this rule, we better
be safe than sorry and also do some check to properly throw an "invalid
packet" exception on wrong slot assignments.
This should also make it easier to debug possible future errors caused
by missing updates to `find_iclass_slots()` rules in
target/hexagon/iclass.c.
Co-authored-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <f8b829443523568823d062adf8bf6659bc6d4a3f.1683552984.git.quic_mathbern@quicinc.com>
**** Changes in v3 ****
Fix bugs exposed by dpmpyss_rnd_s0 instruction
Set correct size/signedness for constants
Test cases added to tests/tcg/hexagon/misc.c
**** Changes in v2 ****
Fix bug in imm_print identified in clang build
Currently, idef-parser skips all floating point instructions. However,
there are some floating point instructions that can be handled.
The following instructions are now parsed
F2_sfimm_p
F2_sfimm_n
F2_dfimm_p
F2_dfimm_n
F2_dfmpyll
F2_dfmpylh
To make these instructions work, we fix some bugs in parser-helpers.c
gen_rvalue_extend
gen_cast_op
imm_print
lexer properly sets size/signedness of constants
Test cases added to tests/tcg/hexagon/fpstuff.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230501203125.4025991-1-tsimpson@quicinc.com>
The following have overrides
S2_insert
S2_insert_rp
S2_asr_r_svw_trun
A2_swiz
These instructions have semantics that write to the destination
before all the operand reads have been completed. Therefore,
the idef-parser versions were disabled with the short-circuit patch.
Test cases added to tests/tcg/hexagon/read_write_overlap.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-16-tsimpson@quicinc.com>
The generated helpers for HVX use pass-by-reference, so they can't
short-circuit when the reads/writes overlap. The instructions with
overrides are OK because they use tcg_gen_gvec_*.
We add a flag has_hvx_helper to DisasContext and extend gen_analyze_funcs
to set the flag when the instruction is an HVX instruction with a
generated helper.
We add an override for V6_vcombine so that it can be short-circuited
along with a test case in tests/tcg/hexagon/hvx_misc.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-15-tsimpson@quicinc.com>
Tests added for the following instructions
J2_callrh
J2_jumprh
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-10-tsimpson@quicinc.com>
The following instructions are tested
V6_vasrvuhubrndsat
V6_vasrvuhubsat
V6_vasrvwuhrndsat
V6_vasrvwuhsat
V6_vassign_tmp
V6_vcombine_tmp
V6_vmpyuhvs
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-8-tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-6-tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-4-tsimpson@quicinc.com>
Add support for the ELF flags
Move target/hexagon/cpu.[ch] to be v73
Change the compiler flag used by "make check-tcg"
The decbin instruction is removed in Hexagon v73, so check the
version before trying to compile the instruction.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-2-tsimpson@quicinc.com>
This patch changes how the avocado tests are provided, ever so
slightly. Instead of creating a new testing venv, use the
configure-provided 'pyvenv' instead, and install optional packages into
that.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20230511035435.734312-20-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
NetBSD cannot successfully run "ensurepip" without access to the pyexpat
module, which NetBSD debundles. Like the Debian patch, it would be
strictly faster long term to install pip/setuptools, and I recommend
developers at their workstations take that approach instead.
For the purposes of a throwaway VM, there's not really a speed
difference for who is responsible for installing pip; us (needs
py310-pip) or Python (needs py310-expat).
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230511035435.734312-14-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
NetBSD removes some packages from the Python stdlib, but only
re-packages them for Python 3.10. Switch to using Python 3.10.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230511035435.734312-13-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several debian-based tests need the python3-venv dependency as a
consequence of Debian debundling the "ensurepip" module normally
included with Python.
As mkvenv.py stands as of this commit, Debian requires EITHER:
(A) setuptools and pip, or
(B) ensurepip
mkvenv is a few seconds faster if you have setuptools and pip, so
developers should prefer the first requirement. For the purposes of CI,
the time-save is a wash; it's only a matter of who is responsible for
installing pip and when; the timing is about the same.
Arbitrarily, I chose adding ensurepip to the test configuration because
it is normally part of the Python stdlib, and always having it allows us
a more consistent cross-platform environment.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230511035435.734312-12-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free allocated directory entries in v9fs_rreaddir() if argument
`entries` was passed as NULL, to avoid a memory leak. It is
explicitly allowed by design for `entries` to be NULL. [1]
[1] https://lore.kernel.org/all/1690923.g4PEXVpXuU@silver
Reported-by: Coverity (CID 1487558)
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1psh5T-0002XN-1C@lizzy.crudebyte.com>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230426235813.198183-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Multiarch tests are written in C and need support for printing
characters. Instead of implementing the runtime from scratch, just
reuse the pc-bios/s390-ccw one.
Run tests with -nographic in order to enable SCLP (enable this for
the existing tests as well, since it does not hurt).
Use the default linker script for the new tests.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230511114651.439872-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Store the bytes in descending order on big-endian.
Invert the logic in the multi-byte signed tests on big-endian.
Make the checks in the multi-byte signed tests stricter.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230511114651.439872-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Bios bits avocado tests need mformat (provided by the mtools package) and
xorriso tools in order to run within gitlab CI containers. Add those
dependencies within the Dockerfiles so that containers can be built with
those tools present and bios bits avocado tests can be run there.
xorriso package conflicts with genisoimage package on some distributions.
Therefore, it is not possible to have both the packages at the same time
in the container image uniformly for all distribution flavors. Further,
on some distributions like RHEL, both xorriso and genisoimage
packages provide /usr/bin/genisoimage and on some other distributions like
Fedora, only genisoimage package provides the same utility.
Therefore, this change removes the dependency on geninsoimage for building
container images altogether keeping only xorriso package. At the same time,
cdrom-test.c is updated to use and check for existence of only xorrisofs.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230504154611.85854-3-anisinha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Pull in the following changes from lcitool:
* tests/lcitool/libvirt-ci 85487e1...c8971e9 (18):
> mappings: add new package mappings for mformat and xorriso
> docs: testing: Update contents with tox
> .gitlab-ci.yml: Always test against installed lcitool
> gitlab-ci.yml: Start using tox for testing
> tox: Allow running with custom pytest options with {posargs}
> gitignore: Add the default .tox directory
> dev-requirements: Reference VM requirements
> requirements: Add tox to dev-requirements.txt and drop pytest and flake
> test-requirements: Rename to dev-requirements.txt
> Add tox.ini configuration file
> tests: commands: Consolidate the installed package/run from git tests
> Add a pytest.ini
> facts: targets: Drop Fedora 36 target
> gitlab-ci.yml: Add Fedora 38 target
> facts: targets: Add Fedora 38
> facts: mappings: Drop 'zstd' mapping
> facts: projects: nbdkit: Replace zstd mapping with libzstd
> docs: mappings: Add a section on the preferred mapping naming scheme
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230504154611.85854-2-anisinha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The qmp_discard_response method simply ignores the result of the QMP
command, merely unref'ing the object. This is a bad idea for tests
as it leaves no trace if the QMP command unexpectedly failed. The
qtest_qmp_assert_success method will validate that the QMP command
returned without error, and if errors occur, it will print a message
on the console aiding debugging.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230421171411.566300-2-berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We can have failure with the inet type test because the port address
is not allocated atomically and can be taken by another test between its
selection and the start of QEMU. To avoid that, use an unix socket with
a path that is unique
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20230503094109.1198248-1-lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The URLs here are not valid anymore - looks like the assets got moved
into the pub/archive/ subfolder instead.
Message-Id: <20230502105721.1661930-1-thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This pull request contain's Sam Li's zoned storage support in the QEMU block
layer and virtio-blk emulation.
v2:
- Sam fixed the CI failures. CI passes for me now. [Richard]
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmRiWCgACgkQnKSrs4Gr
c8h/7gf+MMm2cGEaf376t8HMwTc6wbXVfbmAlZrge2EXPZfFvEaxj7HClcEraOgV
yJsGWeU6mOw4r68ICJ/4KhrY1cdv+VZym/LsMLMcFUTXFHnyX4pyU3am31FPOI4K
+wrDYJOJhc4DkAESWGgEWiMKpuO/uUEgBmHdW+qPFCl77Yl/eP6H5uNP6nGFn55p
QpS/l8iha7PDkc81EsrjA+e/YI0ubfNSP7+zZElhQ98354CQ0MCfmZ6h9bT+o2bu
R7SBUj80e+2X0a1b9s/2Jz/x8l4TEsl8kr48/Q1usq3GVVkbjEgqsk6wTN13Q/4g
CeIR7E61ZeYzmpb4tLFRIqK2Jw+NEQ==
=Q8xW
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
This pull request contain's Sam Li's zoned storage support in the QEMU block
layer and virtio-blk emulation.
v2:
- Sam fixed the CI failures. CI passes for me now. [Richard]
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmRiWCgACgkQnKSrs4Gr
# c8h/7gf+MMm2cGEaf376t8HMwTc6wbXVfbmAlZrge2EXPZfFvEaxj7HClcEraOgV
# yJsGWeU6mOw4r68ICJ/4KhrY1cdv+VZym/LsMLMcFUTXFHnyX4pyU3am31FPOI4K
# +wrDYJOJhc4DkAESWGgEWiMKpuO/uUEgBmHdW+qPFCl77Yl/eP6H5uNP6nGFn55p
# QpS/l8iha7PDkc81EsrjA+e/YI0ubfNSP7+zZElhQ98354CQ0MCfmZ6h9bT+o2bu
# R7SBUj80e+2X0a1b9s/2Jz/x8l4TEsl8kr48/Q1usq3GVVkbjEgqsk6wTN13Q/4g
# CeIR7E61ZeYzmpb4tLFRIqK2Jw+NEQ==
# =Q8xW
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 15 May 2023 09:04:56 AM PDT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
docs/zoned-storage:add zoned emulation use case
virtio-blk: add some trace events for zoned emulation
block: add accounting for zone append operation
virtio-blk: add zoned storage emulation for zoned devices
block: add some trace events for zone append
qemu-iotests: test zone append operation
block: introduce zone append write for zoned devices
file-posix: add tracking of the zone write pointers
docs/zoned-storage: add zoned device documentation
block: add some trace events for new block layer APIs
iotests: test new zone operations
block: add zoned BlockDriver check to block layer
block/raw-format: add zone operations to pass through requests
block/block-backend: add block layer APIs resembling Linux ZonedBlockDevice ioctls
block/file-posix: introduce helper functions for sysfs attributes
block/block-common: add zoned device structs
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Taking account of the new zone append write operation for zoned devices,
BLOCK_ACCT_ZONE_APPEND enum is introduced as other I/O request type (read,
write, flush).
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20230508051916.178322-3-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The patch tests zone append writes by reporting the zone wp after
the completion of the call. "zap -p" option can print the sector
offset value after completion, which should be the start sector
where the append write begins.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508051510.177850-4-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The new block layer APIs of zoned block devices can be tested by:
$ tests/qemu-iotests/check zoned
Run each zone operation on a newly created null_blk device
and see whether it outputs the same zone information.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-7-faithilikerun@gmail.com
Message-id: 20230324090605.28361-7-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a new test in tests/avocado to check LoongArch virt machine start.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20230513012744.1885728-1-gaosong@loongson.cn>
On a build configured with: --disable-tcg --enable-xen it is possible
to produce a QEMU binary with no TCG nor KVM support. Skip the cdrom
boot tests if that's the case.
Fixes: 0c1ae3ff9d ("tests/qtest: Fix tests when no KVM or TCG are present")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230508181611.2621-4-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- fix up xtensa docker container base to current Debian
- document breakpoint and watchpoint support
- clean up the ansible scripts for Ubuntu 22.04
- add a minimal device profile
- drop https on mipsdistros URL
- fix Kconfig bug for XLNX_VERSAL
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmRbspsACgkQ+9DbCVqe
KkSBowf+JjcVxZMb2kS8pV8WEdAq+fceBYI7mDBSEu0DFqZF+w0XSM+T+VZHyZ8+
QmPeE+McKBUXvq/V4osPnDVVZfBKmwzFN548M6qIMLUbHjbDp94DtudNkAZ0ejhc
+Ack73vzTiTWsGmBaqQxZlcYkZNZiZAhQsTF6cPwna74cDkcRghvd/Zxzy831rVB
gVWhbEkk7SBQhJ+PqRIeso60DbWvCaVDMrkPc2WX8kup6QltbUpoayS/eNOtBkfA
C557eOBxoM8s0cu33O780K5mCPCyk1IaIynvZtmkty0DXUSd5y9SNpsofhAY7BGy
4QdlolLygDgEC3s4bMULGy04nzaylw==
=a+97
-----END PGP SIGNATURE-----
Merge tag 'pull-testing-updates-100523-1' of https://gitlab.com/stsquad/qemu into staging
Testing updates:
- fix up xtensa docker container base to current Debian
- document breakpoint and watchpoint support
- clean up the ansible scripts for Ubuntu 22.04
- add a minimal device profile
- drop https on mipsdistros URL
- fix Kconfig bug for XLNX_VERSAL
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmRbspsACgkQ+9DbCVqe
# KkSBowf+JjcVxZMb2kS8pV8WEdAq+fceBYI7mDBSEu0DFqZF+w0XSM+T+VZHyZ8+
# QmPeE+McKBUXvq/V4osPnDVVZfBKmwzFN548M6qIMLUbHjbDp94DtudNkAZ0ejhc
# +Ack73vzTiTWsGmBaqQxZlcYkZNZiZAhQsTF6cPwna74cDkcRghvd/Zxzy831rVB
# gVWhbEkk7SBQhJ+PqRIeso60DbWvCaVDMrkPc2WX8kup6QltbUpoayS/eNOtBkfA
# C557eOBxoM8s0cu33O780K5mCPCyk1IaIynvZtmkty0DXUSd5y9SNpsofhAY7BGy
# 4QdlolLygDgEC3s4bMULGy04nzaylw==
# =a+97
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 10 May 2023 04:04:59 PM BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-updates-100523-1' of https://gitlab.com/stsquad/qemu:
hw/arm: Select XLNX_USB_SUBSYS for xlnx-zcu102 machine
tests/avocado: use http for mipsdistros.mips.com
gitlab: enable minimal device profile for aarch64 --disable-tcg
gitlab: add ubuntu-22.04-aarch64-without-defaults
scripts/ci: clean-up the 20.04/22.04 confusion in ansible
scripts/ci: add gitlab-runner to kvm group
docs: document breakpoint and watchpoint support
tests/docker: bump the xtensa base to debian:11-slim
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As the cached assets have fallen out of our cache new attempts to
fetch these binaries fail hard due to certificate expiry. It's hard
to find a contact email for the domain as the root page of mipsdistros
throws up some random XML. I suspect Amazon are merely the hosts.
The checksums should protect us from any man-in-the-middle type
attacks.
Message-Id: <20230503091244.1450613-22-alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Stretch is going out of support so things like security updates will
fail. As the toolchain itself is binary it hopefully won't mind the
underlying OS being updated.
Message-Id: <20230503091244.1450613-3-alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Richard Henderson <richard.henderson@linaro.org>
- Graph locking, part 3 (more block drivers)
- Compile out assert_bdrv_graph_readable() by default
- Add configure options for vmdk, vhdx and vpc
- Fix use after free in blockdev_mark_auto_del()
- migration: Attempt disk reactivation in more failure scenarios
- Coroutine correctness fixes
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmRbi6ERHGt3b2xmQHJl
ZGhhdC5jb20ACgkQfwmycsiPL9Y66A//ZRk/0M6EZUJPAKG6m/XLTDNrOCNBZ1Tu
kBGvxXsVQZMt4gGpBad4l2INN6IQKTIdIf+lK71EpxMPmFG6xK32btn38yywCAfQ
lr1p5nR0Y/zSlT+XzP4yKy/CtQl6U0rkysmjCIk35bZc7uLy6eo4oFR4vmhRRt2M
UGltB50/Nicx12YFufVjodbhv+apxTGwS2XHatmwqtjKeYReSz8mJHslEy6DvC8m
ziNThD6YBy7hMktAhNaqUqtZD0OSWz66VMObco/4i2++sOAMZIspXQkjv3AjH74e
lmgMhNc/xgJKPwFBPsj6F7dOKxwhdKD9jzZlx3yaBtAU18hpWX54QWuA3/CFlySc
5QbbqIstFTC8lqoRWThQrcHHRKbDBJCP4ImRXUIKhuPaxEzXA9zb3+f3QPTIjLSA
KO7nxuSmO+tC7hQ1K9kAjRZHWlxxAk4clk+7UrK4UrWgGxfCUKgFg4Tyx7RrpwA6
j4L5vwAY60LW74tikWe9xJx2QbdRoWBTTZhUyirbO7rLX1e8mS1nUWmtIsFSQxAq
Z7nX7ygN0WEF+8qIsk3jTGaEeJoCM7+7B+X2RpSy0sftFjFYmybIiUgLMO7e+ozK
rvUPnwlHAbGCVIJOKrUDj3cGt6k3/xnrTajUc7pCB3KKqG4pe+IlZuHyKIUMActb
dBLaBnj0M2o=
=hw9E
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- Graph locking, part 3 (more block drivers)
- Compile out assert_bdrv_graph_readable() by default
- Add configure options for vmdk, vhdx and vpc
- Fix use after free in blockdev_mark_auto_del()
- migration: Attempt disk reactivation in more failure scenarios
- Coroutine correctness fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmRbi6ERHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9Y66A//ZRk/0M6EZUJPAKG6m/XLTDNrOCNBZ1Tu
# kBGvxXsVQZMt4gGpBad4l2INN6IQKTIdIf+lK71EpxMPmFG6xK32btn38yywCAfQ
# lr1p5nR0Y/zSlT+XzP4yKy/CtQl6U0rkysmjCIk35bZc7uLy6eo4oFR4vmhRRt2M
# UGltB50/Nicx12YFufVjodbhv+apxTGwS2XHatmwqtjKeYReSz8mJHslEy6DvC8m
# ziNThD6YBy7hMktAhNaqUqtZD0OSWz66VMObco/4i2++sOAMZIspXQkjv3AjH74e
# lmgMhNc/xgJKPwFBPsj6F7dOKxwhdKD9jzZlx3yaBtAU18hpWX54QWuA3/CFlySc
# 5QbbqIstFTC8lqoRWThQrcHHRKbDBJCP4ImRXUIKhuPaxEzXA9zb3+f3QPTIjLSA
# KO7nxuSmO+tC7hQ1K9kAjRZHWlxxAk4clk+7UrK4UrWgGxfCUKgFg4Tyx7RrpwA6
# j4L5vwAY60LW74tikWe9xJx2QbdRoWBTTZhUyirbO7rLX1e8mS1nUWmtIsFSQxAq
# Z7nX7ygN0WEF+8qIsk3jTGaEeJoCM7+7B+X2RpSy0sftFjFYmybIiUgLMO7e+ozK
# rvUPnwlHAbGCVIJOKrUDj3cGt6k3/xnrTajUc7pCB3KKqG4pe+IlZuHyKIUMActb
# dBLaBnj0M2o=
# =hw9E
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 10 May 2023 01:18:41 PM BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (28 commits)
block: compile out assert_bdrv_graph_readable() by default
block: Mark bdrv_refresh_limits() and callers GRAPH_RDLOCK
block: Mark bdrv_recurse_can_replace() and callers GRAPH_RDLOCK
block: Mark bdrv_query_block_graph_info() and callers GRAPH_RDLOCK
block: Mark bdrv_query_bds_stats() and callers GRAPH_RDLOCK
block: Mark BlockDriver callbacks for amend job GRAPH_RDLOCK
block: Mark bdrv_co_debug_event() GRAPH_RDLOCK
block: Mark bdrv_co_get_info() and callers GRAPH_RDLOCK
block: Mark bdrv_co_get_allocated_file_size() and callers GRAPH_RDLOCK
mirror: Require GRAPH_RDLOCK for accessing a node's parent list
vhdx: Require GRAPH_RDLOCK for accessing a node's parent list
nbd: Mark nbd_co_do_establish_connection() and callers GRAPH_RDLOCK
nbd: Remove nbd_co_flush() wrapper function
block: .bdrv_open is non-coroutine and unlocked
graph-lock: Fix GRAPH_RDLOCK_GUARD*() to be reader lock
graph-lock: Add GRAPH_UNLOCKED(_PTR)
test-bdrv-drain: Don't modify the graph in coroutines
iotests: Test resizing image attached to an iothread
block: Don't call no_coroutine_fns in qmp_block_resize()
block: bdrv/blk_co_unref() for calls in coroutine context
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
test-bdrv-drain contains a few test cases that are run both in coroutine
and non-coroutine context. Running the entire code including the setup
and shutdown in coroutines is incorrect because graph modifications can
generally not happen in coroutines.
Change the test so that creating and destroying the test nodes and
BlockBackends always happens outside of coroutine context.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230504115750.54437-6-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests that trying to resize an image with QMP block_resize doesn't
hang or otherwise fail when the image is attached to a device running in
an iothread.
This is a regression test for the recent fix that changed
qmp_block_resize, which is a coroutine based QMP handler, to avoid
calling no_coroutine_fns directly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230509134133.373408-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Socket paths need to be short to avoid failures. This is why there is a
iotests.sock_dir (defaulting to /tmp) separate from the disk image base
directory.
Make use of it to fix failures in too deeply nested test directories.
Fixes: ab7f7e67a7
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230503165019.8867-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
-----BEGIN PGP SIGNATURE-----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=j6cJ
-----END PGP SIGNATURE-----
Merge tag 'pull-qapi-2023-05-09-v2' of https://repo.or.cz/qemu/armbru into staging
QAPI patches patches for 2023-05-09
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmRbUEYSHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTmzEP/3pDpVxpP7xXLevl2vFqkFyHEjc0L3N4
# x//ljgQojAdM6WU3e0qqOfp/NE2ktUg5D3z+QNiVP1/xXv/dtMGATdG+X9AZs0US
# XnhdicYdBng8bGuhlNuNY8QJ/I4ALwUR44LVOYibVohv2RVYWBapGiHowpyTyABq
# sFSHrj/cgvTMUn53yp7veZTo6rWG6RU/D5uUTOMsvKeAoHoOXMyBxV01SCt84t/J
# pcelINcriP6cQVzgfm1B39UNa0IxinGxEx/IIaxz5Ju66G05HTs4CsBFAF6/0QI/
# 3YerGWPt9fF6+qYNn21Gg9CL1fHHppNqTXkcuTeGn/Ohg53bosktti5Ysn73vtpR
# GWsJr6M4KQ1SwEbZIiFZCS3A4VTbRcr7WkXets39pcpxGDlNisi+zfV95kNo09xR
# hxi8SuWgb2OfQpVs/71eunp+PM1ZQsODurcy4x0/rlYJfhk53kQSMRtlfy5Cn6uY
# +weWUgygBSWG/w0qanWWK5TF1DNlRKzbix6cmMuGGKcpyF7EMWE1kqmjmmu7CQvM
# a3aPTqGtUt0LeqBQIhmeq/jEwd3vxQa1R85gd0/0sWxEMHkPXVfVoaryiaWAykye
# 7r+c8o/41c44zs8YxdZrz72su9fqKC/TeVf5soU46ZucmH8D6f7QHy+s1ec2PEjY
# l6cRIXTXHeQe
# =j6cJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 10 May 2023 09:05:26 AM BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [undefined]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-qapi-2023-05-09-v2' of https://repo.or.cz/qemu/armbru:
qapi: Reformat doc comments to conform to current conventions
qga/qapi-schema: Reformat doc comments to conform to current conventions
docs/devel/qapi-code-gen: Update doc comment conventions
qapi: Section parameter @indent is no longer used, drop
qapi: Relax doc string @name: description indentation rules
qapi: Rewrite parsing of doc comment section symbols and tags
qapi: Fix argument description indentation stripping
tests/qapi-schema/doc-good: Improve argument description tests
tests/qapi-schema/doc-good: Improve a comment
qapi/dump: Indent bulleted lists consistently
qapi: Tidy up a slightly awkward TODO comment
sphinx/qapidoc: Do not emit TODO sections into user manuals
Revert "qapi: BlockExportRemoveMode: move comments to TODO"
meson: Fix to make QAPI generator output depend on main.py
qapi: Fix crash on stray double quote character
docs/devel/qapi-code-gen: Turn FIXME admonitions into comments
docs/devel/qapi-code-gen: Clean up use of quotes a bit
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The QAPI schema doc comment language provides special syntax for
command and event arguments, struct and union members, alternate
branches, enumeration values, and features: descriptions starting with
"@name:".
By convention, we format them like this:
# @name: Lorem ipsum dolor sit amet, consectetur adipiscing elit,
# sed do eiusmod tempor incididunt ut labore et dolore
# magna aliqua.
Okay for names as short as "name", but we have much longer ones. Their
description gets squeezed against the right margin, like this:
# @dirty-sync-missed-zero-copy: Number of times dirty RAM synchronization could
# not avoid copying dirty pages. This is between
# 0 and @dirty-sync-count * @multifd-channels.
# (since 7.1)
The description text is effectively just 50 characters wide. Easy
enough to read, but can be cumbersome to write.
The awkward squeeze against the right margin makes people go beyond it,
which produces two undesirables: arguments about style, and descriptions
that are unnecessarily hard to read, like this one:
# @postcopy-vcpu-blocktime: list of the postcopy blocktime per vCPU. This is
# only present when the postcopy-blocktime migration capability
# is enabled. (Since 3.0)
We could instead format it like
# @postcopy-vcpu-blocktime:
# list of the postcopy blocktime per vCPU. This is only present
# when the postcopy-blocktime migration capability is
# enabled. (Since 3.0)
or, since the commit before previous, like
# @postcopy-vcpu-blocktime:
# list of the postcopy blocktime per vCPU. This is only present
# when the postcopy-blocktime migration capability is
# enabled. (Since 3.0)
However, I'd rather have
# @postcopy-vcpu-blocktime: list of the postcopy blocktime per vCPU.
# This is only present when the postcopy-blocktime migration
# capability is enabled. (Since 3.0)
because this is how rST field and option lists work.
To get this, we need to let the first non-blank line after the
"@name:" line determine expected indentation.
This fills up the indentation pitfall mentioned in
docs/devel/qapi-code-gen.rst. A related pitfall still exists. Update
the text to show it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230428105429.1687850-14-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[Work around lack of walrus operator in Python 3.7 and older]
* more removal of mb_read/mb_set
* bump _WIN32_WINNT to the Windows 8 API
* fix for modular builds with --disable-system
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRZK7wUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroObngf8D6A5l1QQAnImRrZAny6HZV/9xseD
9QhkUW3fxXlUhb8tXomv2BlT8h9GzLIN6aWvcCotT+xK3kAX7mRcYKgPMr9CYL7y
vev/hh+B6RY1CJ/xPT09/BMVjkj50AL0O/OuWMhcQ5nCO7F2sdMjMrsYqqeZcjYf
zx9RTX7gVGt+wWFHxgCgdfL0kfgzexK55YuZU0vLzcA+pYsZWoEfW+fKBIf4rzDV
r9M6mDBUkHBQ0rIVC3QFloAXnYb1JrpeqqL2i2qwhAkLz8LyGqk3lZF20hE/04im
XZcZjWO5pxAxIEPeTken+2x1n8tn2BLkMtvwJdV5TpvICCFRtPZlbH79qw==
=rXLN
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* target/i386: improved EPYC models
* more removal of mb_read/mb_set
* bump _WIN32_WINNT to the Windows 8 API
* fix for modular builds with --disable-system
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRZK7wUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroObngf8D6A5l1QQAnImRrZAny6HZV/9xseD
# 9QhkUW3fxXlUhb8tXomv2BlT8h9GzLIN6aWvcCotT+xK3kAX7mRcYKgPMr9CYL7y
# vev/hh+B6RY1CJ/xPT09/BMVjkj50AL0O/OuWMhcQ5nCO7F2sdMjMrsYqqeZcjYf
# zx9RTX7gVGt+wWFHxgCgdfL0kfgzexK55YuZU0vLzcA+pYsZWoEfW+fKBIf4rzDV
# r9M6mDBUkHBQ0rIVC3QFloAXnYb1JrpeqqL2i2qwhAkLz8LyGqk3lZF20hE/04im
# XZcZjWO5pxAxIEPeTken+2x1n8tn2BLkMtvwJdV5TpvICCFRtPZlbH79qw==
# =rXLN
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 08 May 2023 06:05:00 PM BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
meson: leave unnecessary modules out of the build
docs: clarify --without-default-devices
target/i386: Add EPYC-Genoa model to support Zen 4 processor series
target/i386: Add VNMI and automatic IBRS feature bits
target/i386: Add missing feature bits in EPYC-Milan model
target/i386: Add feature bits for CPUID_Fn80000021_EAX
target/i386: Add a couple of feature bits in 8000_0008_EBX
target/i386: Add new EPYC CPU versions with updated cache_info
target/i386: allow versioned CPUs to specify new cache_info
include/qemu/osdep.h: Bump _WIN32_WINNT to the Windows 8 API
MAINTAINERS: add stanza for Kconfig files
tb-maint: do not use mb_read/mb_set
call_rcu: stop using mb_set/mb_read
test-aio-multithread: simplify test_multi_co_schedule
test-aio-multithread: do not use mb_read/mb_set for simple flags
rcu: remove qatomic_mb_set, expand comments
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When an argument's description starts on the line after the "#arg: "
line, indentation is stripped only from the description's first line,
as demonstrated by the previous commit. Moreover, subsequent lines
with less indentation are not rejected.
Make the first line's indentation the expected indentation for the
remainder of the description. This fixes indentation stripping, and
also requires at least that much indentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230428105429.1687850-12-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Improve the comments to better describe what they test.
Cover argument description starting on a new line indented. This
style isn't documented in docs/devel/qapi-code-gen.rst. qapi-gen.py
accepts it, but messes up indentation: it's stripped from the first
line, not subsequent ones. The next commit will fix this.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230428105429.1687850-11-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
The QAPI generator doesn't reject undocumented members and
features (yet). doc-good.json covers this, with clear "is
undocumented" notes to signal intent.
Except for @Variant1 member @var1, where it's "(but no @var: line)".
Less clear. Replace by "@var1 is undocumented".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230428105429.1687850-10-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Add postcopy tests with compress enabled to ensure nothing breaks
with the refactoring in the next commits.
preempt+compress is blocked, so no test needed for that case.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
There has never been tests for migration with compress enabled.
Add suitable tests, testing with compress-wait-thread = false
too.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Instead of using qatomic_mb_{read,set} mindlessly, just use a per-coroutine
flag that requires no synchronization.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The remaining use of mb_read/mb_set is just to force a thread to exit
eventually. It does not order two memory accesses and therefore can be
just read/set.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add test for vextractbm, vextractwm, vextractdm and vextractqm
instructions. Test works for both qemu-ppc64 and qemu-ppc64le.
Based on the test case written by John Platts posted at [1]
References:
[1] - https://gitlab.com/qemu-project/qemu/-/issues/1536
Signed-off-by: John Platts <john_platts@hotmail.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Lucas Mateus Castro <lucas.araujo@eldorado.org.br>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <168319294881.1159309.17060400720026083557.stgit@ltc-boston1.aus.stglabs.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This commit adds a test to ensure `merged` functions as expected.
We also add a negative test to ensure we haven't regressed previous
functionality.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
* Support building Arm targets with CONFIG_TCG=no (ie KVM only)
* hw/net: npcm7xx_emc: set MAC in register space
* hw/arm/bcm2835_property: Implement "get command line" message
* Deprecate the '-singlestep' command line option in favour of
'-one-insn-per-tb' and '-accel one-insn-per-tb=on'
* Deprecate 'singlestep' member of QMP StatusInfo struct
* docs/about/deprecated.rst: Add "since 7.1" tag to dtb-kaslr-seed deprecation
* hw/net/msf2-emac: Don't modify descriptor in-place in emac_store_desc()
* raspi, aspeed: Write bootloader code correctly on big-endian hosts
* hw/intc/allwinner-a10-pic: Fix bug on big-endian hosts
* Fix bug in A32 ERET on big-endian hosts that caused guest crash
* hw/sd/allwinner-sdhost: Correctly byteswap descriptor fields
* hw/net/allwinner-sun8i-emac: Correctly byteswap descriptor fields
-----BEGIN PGP SIGNATURE-----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=ua3Q
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20230502-2' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Support building Arm targets with CONFIG_TCG=no (ie KVM only)
* hw/net: npcm7xx_emc: set MAC in register space
* hw/arm/bcm2835_property: Implement "get command line" message
* Deprecate the '-singlestep' command line option in favour of
'-one-insn-per-tb' and '-accel one-insn-per-tb=on'
* Deprecate 'singlestep' member of QMP StatusInfo struct
* docs/about/deprecated.rst: Add "since 7.1" tag to dtb-kaslr-seed deprecation
* hw/net/msf2-emac: Don't modify descriptor in-place in emac_store_desc()
* raspi, aspeed: Write bootloader code correctly on big-endian hosts
* hw/intc/allwinner-a10-pic: Fix bug on big-endian hosts
* Fix bug in A32 ERET on big-endian hosts that caused guest crash
* hw/sd/allwinner-sdhost: Correctly byteswap descriptor fields
* hw/net/allwinner-sun8i-emac: Correctly byteswap descriptor fields
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmRRIqoZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3uHxEACkO5NYXhah9KnztwhEjAUH
# CnM6N9IHa4iEF7doWuiS39ZP4bXxCHnX4A1GqGRhsoub5PeiXxucTXlvkwWpOfct
# pX78wHW18pVNJ2jlaly0c9cEI71ojT4zbXC3kjD9f/qHx2qI3rs3Sgb6BYC8QNnx
# P/EHeefrnjwgGhBvzAJ8ATO/jpMYXukuxzjbIP0/7lqB5UxcNxv5rMTTansMO46r
# JN5NdOEM8M8DoJHrHR9K3+Y2Vr1XjOowDPSF8+4rRkJB2v/3415V9bInEsTAvhQu
# Ftua72vjVhTRfvgLXPc9C9S5sx6KHi+NdHfl/D7eL8B4aGHtBaUXv7pJrXUZYyLy
# XNztXUx5EuzxXVN2mg8PYyasnEGjNbTUckAD40iow+DSgemB+MVJRp8f7Rb2yRHh
# YuajDs77NUb9rVzozM+TTJkHfgLDkWCqX2Jm2kAea/gwowzdFCVosAs0cI+cDiBb
# xQUMpERGBE2QJk/+KKc5xmIHUnXZCFTC/ieY2mpr8G6upDspzP254EjNGUCgIZmW
# gYI/UTSX+f7M/+fYRgtSCdJ4LYkqdxUuGfyKccc4S2F2cCuQDGURRp4jHuI1cLyt
# lkrgD1Hj3d9d8ZiMwmXDtiEsJhxDmuVmikmviigfhjLZ0QBd7FdpNz7gQR3lfDwl
# YEGeFrhW2MHutjWSwxQWwQ==
# =ua3Q
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 02 May 2023 03:48:10 PM BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-20230502-2' of https://git.linaro.org/people/pmaydell/qemu-arm: (34 commits)
hw/net/allwinner-sun8i-emac: Correctly byteswap descriptor fields
hw/sd/allwinner-sdhost: Correctly byteswap descriptor fields
target/arm: Add compile time asserts to load/store_cpu_field macros
target/arm: Define and use new load_cpu_field_low32()
hw/intc/allwinner-a10-pic: Don't use set_bit()/clear_bit()
hw/arm/raspi: Use arm_write_bootloader() to write boot code
hw/arm/aspeed: Use arm_write_bootloader() to write the bootloader
hw/arm/boot: Make write_bootloader() public as arm_write_bootloader()
hw/net/msf2-emac: Don't modify descriptor in-place in emac_store_desc()
docs/about/deprecated.rst: Add "since 7.1" tag to dtb-kaslr-seed deprecation
qmp: Deprecate 'singlestep' member of StatusInfo
qapi/run-state.json: Fix missing newline at end of file
hmp: Add 'one-insn-per-tb' command equivalent to 'singlestep'
accel/tcg: Report one-insn-per-tb in 'info jit', not 'info status'
Document that -singlestep command line option is deprecated
bsd-user: Add '-one-insn-per-tb' option equivalent to '-singlestep'
linux-user: Add '-one-insn-per-tb' option equivalent to '-singlestep'
accel/tcg: Use one_insn_per_tb global instead of old singlestep global
softmmu: Don't use 'singlestep' global in QMP and HMP commands
make one-insn-per-tb an accel option
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The 'singlestep' HMP command is confusing, because it doesn't
actually have anything to do with single-stepping the CPU. What it
does do is force TCG emulation to put one guest instruction in each
TB, which can be useful in some situations.
Create a new HMP command 'one-insn-per-tb', so we can document that
'singlestep' is just a deprecated synonym for it, and eventually
perhaps drop it.
We aren't obliged to do deprecate-and-drop for HMP commands,
but it's easy enough to do so, so we do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230417164041.684562-9-peter.maydell@linaro.org
The test set -accel tcg, so restrict it to when TCG is present.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230426180013.14814-13-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The migration tests are currently broken for an aarch64 host because
the tests pass no 'machine' and 'cpu' options on the QEMU command
line.
Add a separate class to each architecture so that we can specify
'machine' and 'cpu' options instead of relying on defaults.
Add a skip decorator to keep the current behavior of only running
migration tests when the qemu target matches the host architecture.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20230426180013.14814-10-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It is possible to have a build with both TCG and KVM disabled due to
Xen requiring the i386 and x86_64 binaries to be present in an aarch64
host.
If we build with --disable-tcg on the aarch64 host, we will end-up
with a QEMU binary (x86) that does not support TCG nor KVM.
Skip tests that crash or hang in the above scenario. Do not include
any test cases if TCG and KVM are missing.
Make sure that calls to qtest_has_accel are placed after g_test_init
in similar fashion to commit ae4b01b349 ("tests: Ensure TAP version is
printed before other messages") to avoid TAP parsing errors.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230426180013.14814-9-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're about to move the 32-bit CPUs under CONFIG_TCG, so adjust the
query-cpu-model-expansion test to check against the cortex-a7, which
is already under CONFIG_TCG. That allows the next patch to contain
only code movement. (All the test cares about is that the CPU type
it's checking is one which definitely doesn't work under KVM.)
While here add comments clarifying what we're testing.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230426180013.14814-7-farosas@suse.de
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The test set -accel tcg, so restrict it to when TCG is present.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230426180013.14814-13-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The spice test is currently hanging on FreeBSD. It likely was
never working before, since in the past, our configure script
was failing to detect this feature due to a bug in the spice
package there (it just got enabled recently by the commit
https://cgit.freebsd.org/ports/commit/?id=cf16b1c9063351325f0 ).
To get the CI working again, let's disable the failing test for
now until someone has enough spare time to debug and fix the real
underlying problem.
Message-Id: <20230428151351.1365822-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Devices can pass their MemoryReentrancyGuard (from their DeviceState),
when creating new BHes. Then, the async API will toggle the guard
before/after calling the BH call-back. This prevents bh->mmio reentrancy
issues.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20230427211013.2994127-3-alxndr@bu.edu>
[thuth: Fix "line over 90 characters" checkpatch.pl error]
Signed-off-by: Thomas Huth <thuth@redhat.com>
chr_read() is printing an error message and returning with s->data_mutex taken.
This can potentially cause a hang. Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230427125423.103536-1-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Running every plugin with every test is getting excessive as well as
not really improving coverage that much. Restrict the plugin tests to
just the MULTIARCH_TESTS which are shared between most architecture
for both system and user-mode. For those that aren't we need to squash
MULTIARCH_TESTS so we don't add them when they are not part of the
TESTS global.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230424092249.58552-14-alex.bennee@linaro.org>
Commit c0c8687ef0 disabled the
boot_linux.py test-case due to which the code coverage for ppc
decreased by around 2%. As per the discussion on
https://lore.kernel.org/qemu-devel/87sfdpqcy4.fsf@linaro.org/ it
was mentioned that the baseline test for ppc64 could be modified
to make up this 2% code coverage. This patch attempts to achieve
this 2% code coverage by adding various device command line
arguments (to ./qemu-system-ppc64) in the tuxrun_baselines.py
test-case.
The code coverage report with boot_linux.py, without it and finally
with these tuxrun_baselines.py changes is as follows:
With boot_linux.py
------------------
lines......: 13.8% (58006 of 420997 lines)
functions..: 20.7% (7675 of 36993 functions)
branches...: 9.2% (22146 of 240611 branches)
Without boot_linux.py (without this patch changes)
--------------------------------------------------
lines......: 11.9% (50174 of 420997 lines)
functions..: 18.8% (6947 of 36993 functions)
branches...: 7.4% (17580 of 239017 branches)
Without boot_linux.py (with this patch changes)
-----------------------------------------------
lines......: 13.8% (58287 of 420997 lines)
functions..: 20.7% (7640 of 36993 functions)
branches...: 8.4% (20223 of 240611 branches)
Rebased on Alex Benee's testing/next branch:
https://gitlab.com/stsquad/qemu/-/tree/testing/next
Signed-off-by: Kautuk Consul <kconsul@linux.vnet.ibm.com>
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230424041830.1275636-1-kconsul@linux.vnet.ibm.com>
Message-Id: <20230424092249.58552-13-alex.bennee@linaro.org>
Factor out the code that finds the qemu-img binary in the
QemuSystemTest class and create a new get_qemu_img() function
with it. This function will get called also from the new code
in tuxrun_baselines.py avocado test-case.
Signed-off-by: Kautuk Consul <kconsul@linux.vnet.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230421042322.684093-2-kconsul@linux.vnet.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230424092249.58552-12-alex.bennee@linaro.org>
test_arm_ast2500_evb_sdk and test_arm_ast2600_evb_sdk are currently
failing. The problem is that they are trying to look for the login
prompt that does not have a newline at the end - but the logic in
_console_interaction() only handles full lines. It used to work by
accident in the past since there were sometimes kernel (warning and
error) messages popping up that finally provided a newline character
in the output, but since the tests have been changed to run with the
"quiet" kernel parameter, this is not working anymore.
To make this work reliably, we must not look for the "login:" prompt,
but have to use some text ending with a newline instead. And in the
ast2600 test, switch to ssh instead of trying to log into the serial
console - this works much more reliable and also has the benefit of
excercising the network interface here a little bit, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230421110345.1294131-3-thuth@redhat.com>
[AJB: remove stray debug log]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230424092249.58552-10-alex.bennee@linaro.org>
This function will be useful in other tests, too, so move it to the
core LinuxSSHMixIn class.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230421110345.1294131-2-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230424092249.58552-9-alex.bennee@linaro.org>
FreeBSD 13.0 has been released in April 2021:
https://www.freebsd.org/releases/13.0R/announce/
According to QEMU's support policy, we stop supporting the previous
major release two years after the the new major release has been
published. So we can stop testing FreeBSD 12 in our CI now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230418160225.529172-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230424092249.58552-8-alex.bennee@linaro.org>
This change adds set of boot tests on SBSA-ref machine:
1. boot firmware up to the EDK2 banner
2. boot Alpine Linux
Prebuilt flash volumes are included, built using upstream documentation.
To unify tests for AArch64/virt and AArch64/sbsa-ref we boot
the same Alpine Linux image on both.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230323082813.971535-1-marcin.juszkiewicz@linaro.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-Id: <20230328171426.14258-1-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230424092249.58552-4-alex.bennee@linaro.org>
The tuxboot images now have a stable snapshot URL so we can enable the
checksums and remove the avocado warnings. We will have to update as
old snapshots retire but that won't be too frequent.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230424092249.58552-3-alex.bennee@linaro.org>
Avocado version 101.0 has a fix to re-compute the checksum
of an asset file if the algorithm used in the *-CHECKSUM
file isn't the same as the one being passed to it by the
avocado user (i.e. the avocado_qemu python module).
In the earlier avocado versions this fix wasn't there due
to which if the checksum wouldn't match the earlier
checksum (calculated by a different algorithm), the avocado
code would start downloading a fresh image from the internet
URL thus making the test-cases take longer to execute.
Bump up the avocado-framework version to 101.0.
Signed-off-by: Kautuk Consul <kconsul@linux.vnet.ibm.com>
Tested-by: Hariharan T S <hariharan.ts@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230327115030.3418323-2-kconsul@linux.vnet.ibm.com>
Message-Id: <20230424092249.58552-2-alex.bennee@linaro.org>
-----BEGIN PGP SIGNATURE-----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=wLx6
-----END PGP SIGNATURE-----
Merge tag 'pull-qapi-2023-04-26' of https://repo.or.cz/qemu/armbru into staging
QAPI patches patches for 2023-04-26
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmRIvOkSHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTX3MQAIqrKQbOzQ81/cDZ7aeLOroDoGYf1Cs0
# 0NiEVlyoblWNzL3HraGgXiNRTP+zaG/TcFKza1nz8qjdkxWxBjdbfF5Lm6mQf5Zo
# tcHUjksmnUlPkLYSOyEjfY9SNvcS6g7djE/NF5lbJtzYGZScZpLarELR7oUvrcXR
# AEiw8N5FZXp+j6cTeWvrLzSqz9qBsFJUCGcGER0T/Mt5MlUwDexE1xe7g8oD5l+b
# s0jeQr1PTZm5k6ehajQtgbHvAkgH8xVTKqbB/U5iz4VhYriH+IPEOtfCFt6/1soz
# pVkYikJpazCvQMjqnWu9dE1onthgSsEIOV29kFU0Kr8ATZuJBQMuLVp4hSsbKANj
# BUVyL2/fUsIp7gd+KikXUOjKYajxek6Q2YLAPpL+1pBCTql/PBQ7td8CECdiv/9e
# Xh50q+BGvyEiyoyf4EEpaLXUZog605WHEaODj9uPtNHJP9x6Rqt93FUsdWUtt/k9
# hJ8RSKy8njr0vxGoJkj89m2XfCwtuX3VQ5IXvv/If4U5Y4+JhcLtiqW+Njh8fAM4
# ZwIrlUYG7inLUKFVcQ3sEGpaj611i5ixIxctUvEiggZX+fPeSFKYUr+Rq8WXM8gv
# suLXz7VF6H4Sw30lCvdQ4LSungbzlYAtQYpmdEQGoM8iasIi4PoDf0cTYBbMYHDX
# +pZvWC50cVtf
# =wLx6
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 26 Apr 2023 06:55:53 AM BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [undefined]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-qapi-2023-04-26' of https://repo.or.cz/qemu/armbru:
qapi: allow unions to contain further unions
qapi: Improve specificity of type/member descriptions
qapi: support updating expected test output via make
qapi: Require boxed for conditional command and event arguments
qapi: Fix code generated for optional conditional struct member
tests/qapi-schema: Cover optional conditional struct member
tests/qapi-schema: Clean up positive test for conditionals
tests/qapi-schema: Rename a few conditionals
tests/qapi-schema: Improve union discriminator coverage
qapi: Fix to reject 'data': 'mumble' in struct
qapi: Fix error message when type name or array is expected
qapi: Simplify code a bit after previous commits
qapi: Improve error message for unexpected array types
qapi: Split up check_type()
qapi: Clean up after removal of simple unions
qapi/schema: Use super()
qapi: Fix error message format regression
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This extends the QAPI schema validation to permit unions inside unions,
provided the checks for clashing fields pass.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230420102619.348173-4-berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
It is possible to pass --update to tests/qapi-schema/test-qapi.py
to make it update the output files on error. This is inconvenient
to achieve though when test-qapi.py is run indirectly by make/meson.
Instead simply allow for an env variable to be set:
$ QAPI_TEST_UPDATE= make check-qapi-schema
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230420102619.348173-2-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230309084456.304669-8-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
thread_pool_submit_aio() is always called on a pool taken from
qemu_get_current_aio_context(), and that is the only intended
use: each pool runs only in the same thread that is submitting
work to it, it can't run anywhere else.
Therefore simplify the thread_pool_submit* API and remove the
ThreadPool function parameter.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-5-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The C code generator fails to honor 'if' conditions of command and
event arguments.
For instance, tests/qapi-schema/qapi-schema-test.json has
{ 'event': 'TEST_IF_EVENT',
'data': { 'foo': 'TestIfStruct',
'bar': { 'type': ['str'], 'if': 'TEST_IF_EVT_ARG' } },
'if': { 'all': ['TEST_IF_EVT', 'TEST_IF_STRUCT'] } }
Generated tests/test-qapi-events.h fails to honor the TEST_IF_EVT_ARG
condition:
#if defined(TEST_IF_EVT) && defined(TEST_IF_STRUCT)
void qapi_event_send_test_if_event(TestIfStruct *foo, strList *bar);
#endif /* defined(TEST_IF_EVT) && defined(TEST_IF_STRUCT) */
Only uses so far are in tests/.
We could fix the generator to emit something like
#if defined(TEST_IF_EVT) && defined(TEST_IF_STRUCT)
void qapi_event_send_test_if_event(TestIfStruct *foo
#if defined(TEST_IF_EVT_ARG)
, strList *bar
#endif
);
#endif /* defined(TEST_IF_EVT) && defined(TEST_IF_STRUCT) */
Ugly. Calls become similarly ugly. Not worth fixing.
Conditional arguments work fine with 'boxed': true, simply because
complex types with conditional members work fine. Not worth breaking.
Reject conditional arguments unless boxed.
Move the tests cases covering unboxed conditional arguments out of
tests/qapi-schema/qapi-schema-test.json. Cover boxed conditional
arguments there instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-13-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Union TestIfUnion is conditional on macros TEST_IF_UNION and
TEST_IF_STRUCT. It uses TestIfEnum, which is conditional on macro
TEST_IF_ENUM. If TEST_IF_UNION and TEST_IF_STRUCT are defined, but
TEST_IF_ENUM isn't, the generated code won't compile.
Command test-if-cmd is conditional an macros TEST_IF_CMD and
TEST_IF_STRUCT, and uses TestIfEnum. Similar issue.
Event TEST_IF_EVENT is conditional an macros TEST_IF_EVT and
TEST_IF_STRUCT, and uses TestIfEnum. Similar issue.
Replace the uses of TestIfEnum in the latter two by str.
TestIfUnion is now TestIfEnum's only user. Change TestIfEnum's
condition to TEST_IF_UNION.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-12-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message corrected]
A union's 'discriminator' must name one of the common members.
QAPISchemaVariants.check() looks it up by its c_name(), then checks
the name matches exactly (because c_name() is not injective).
Tests union-base-empty and union-invalid-discriminator both cover the
case where lookup fails. Repurpose the latter to cover the case where
it succeeds and the name check fails.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-10-armbru@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message typo fixed]
A struct's 'data' must be a JSON object defining the struct's members.
The QAPI code generator incorrectly accepts a JSON string instead, and
then crashes in QAPISchema._make_members() called from
._def_struct_type().
Fix to reject it: factor check_type_implicit() out of
check_type_name_or_implicit(), and switch check_struct() to use it
instead. Also add a test case.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-9-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[More detailed commit message]
We incorrectly report "FOO should be a type name" when it could also
be an array. Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-8-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We reject array types in certain places with "cannot be an array".
Deleting this check improves the error message to "should be a type
name" or "should be an object or type name", depending on context, so
do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-6-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmRCu/gACgkQewJE+xLe
RCIlnQgAkdLjTQGC+V+HKIcuD6BWCqk+fRuMAI7Ban/bq/bN5nm4xv8rWIdBAKkj
xj1MxWgW/yns76A/OupC6tJD/1PvkdvCGUPIdRphK60raP3l1o88ivs2WsJdw9/O
PAubqwyYNhdnEIhiA9QOVkUoh7rVVKzpri2ldRNdmxBc9tQi9POYvKSVy6rSoiQw
rhrYfpc0fd50L4oeT1rqpCad9NrbDlCwrRSc/1oA/pUPiuxUYYr6BiIx0ytbTvH2
aMJUdA2ynkrgxkFn3v42qOrT7M9cs1b7abHz9obWibl6Jqcl4AIoKvF/kAuDmQuV
FAq8Qhn/cK49M9xCEZOI8olE/xIUjQ==
=+I8i
-----END PGP SIGNATURE-----
Merge tag 'pull-hex-20230421' of https://github.com/quic/qemu into staging
Hexagon update
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmRCu/gACgkQewJE+xLe
# RCIlnQgAkdLjTQGC+V+HKIcuD6BWCqk+fRuMAI7Ban/bq/bN5nm4xv8rWIdBAKkj
# xj1MxWgW/yns76A/OupC6tJD/1PvkdvCGUPIdRphK60raP3l1o88ivs2WsJdw9/O
# PAubqwyYNhdnEIhiA9QOVkUoh7rVVKzpri2ldRNdmxBc9tQi9POYvKSVy6rSoiQw
# rhrYfpc0fd50L4oeT1rqpCad9NrbDlCwrRSc/1oA/pUPiuxUYYr6BiIx0ytbTvH2
# aMJUdA2ynkrgxkFn3v42qOrT7M9cs1b7abHz9obWibl6Jqcl4AIoKvF/kAuDmQuV
# FAq8Qhn/cK49M9xCEZOI8olE/xIUjQ==
# =+I8i
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 21 Apr 2023 05:38:16 PM BST
# gpg: using RSA key 3635C788CE62B91FD4C59AB47B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* tag 'pull-hex-20230421' of https://github.com/quic/qemu:
Hexagon (target/hexagon) Add overrides for cache/sync/barrier instructions
Hexagon (target/hexagon) Remove unused slot variable in helpers
Hexagon (tests/tcg/hexagon) Move HVX test infra to header file
Hexagon (target/hexagon) Updates to USR should use get_result_gpr
Hexagon (target/hexagon) Add overrides for count trailing zeros/ones
Hexagon (target/hexagon) Merge arguments to probe_pkt_scalar_hvx_stores
Hexagon (target/hexagon) Remove redundant/unused macros
Use black code style for python scripts
Use f-strings in python scripts
Hexagon (translate.c): avoid redundant PC updates on COF
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmRBLgoACgkQda1lgCoL
QhEPyQf/WfEg8k2hDLExobsSgup1IsnT+mHHTBOZVJvq2efg2YXUTHA56fmD9X6d
crqTq68L5oaMES5iYEZhA7EAgfk3RvxDQGrlXBByPzrc6SSwEHHMR4Zzi5zrbCoW
t6TmaKQrlQqYwkhhsbyqnG46bj0ugCDagkBLfJdVl96fjkYgTspcDxaNwqwy/DPn
GTmQlvdRY09D1nylIdtcLBIfsM+sIkRslyngbUEIy+Bx8EWRy2a8Qw0BdY9g1XoE
e0CaRaFMpju1KOIjq0YSIzt0LSQDFfPc1IlUAC0ZALhNmp+PPNtr4E7+4kFfO2ym
1sT2w25ho8dYDdm/m8tIauCdGoHw4A==
=ML27
-----END PGP SIGNATURE-----
Merge tag 'pull-tpm-2023-04-20-1' of https://github.com/stefanberger/qemu-tpm into staging
Merge tpm 2023/04/20 v1
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmRBLgoACgkQda1lgCoL
# QhEPyQf/WfEg8k2hDLExobsSgup1IsnT+mHHTBOZVJvq2efg2YXUTHA56fmD9X6d
# crqTq68L5oaMES5iYEZhA7EAgfk3RvxDQGrlXBByPzrc6SSwEHHMR4Zzi5zrbCoW
# t6TmaKQrlQqYwkhhsbyqnG46bj0ugCDagkBLfJdVl96fjkYgTspcDxaNwqwy/DPn
# GTmQlvdRY09D1nylIdtcLBIfsM+sIkRslyngbUEIy+Bx8EWRy2a8Qw0BdY9g1XoE
# e0CaRaFMpju1KOIjq0YSIzt0LSQDFfPc1IlUAC0ZALhNmp+PPNtr4E7+4kFfO2ym
# 1sT2w25ho8dYDdm/m8tIauCdGoHw4A==
# =ML27
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 20 Apr 2023 01:20:26 PM BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* tag 'pull-tpm-2023-04-20-1' of https://github.com/stefanberger/qemu-tpm:
qtest: Add a test case for TPM TIS I2C connected to Aspeed I2C controller
qtest: Move tpm_util_tis_transmit() into tpm-tis-utils.c and rename it
qtest: Add functions for accessing devices on Aspeed I2C controller
tests/avocado/aspeed: Add TPM TIS I2C test
tpm: Add support for TPM device over I2C bus
tpm: Extend common APIs to support TPM TIS I2C
docs: Add support for TPM devices over I2C bus
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will facilitate adding additional tests in separate .c files
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230406174241.853296-1-tsimpson@quicinc.com>
The following instructions are overriden
S2_ct0 Count trailing zeros
S2_ct1 Count trailing ones
S2_ct0p Count trailing zeros (register pair)
S2_ct1p Count trailing ones (register pair)
These instructions are not handled by idef-parser because the
imported semantics uses bit-reverse. However, they are
straightforward to implement in TCG with tcg_gen_ctzi_*
Test cases added to tests/tcg/hexagon/misc.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230405164211.30015-1-tsimpson@quicinc.com>
* Allow setting a chardev input file on the command line
* Fix .travis.yml to work with non-public Travis instances, too
* Move a lot of code from specifc_ss into softmmu_ss
* Add a test case for TPM TIS I2C connected to Aspeed I2C controller
* Update tests/vm/freebsd to version 13
* Some more misc minor fixes here and there
-----BEGIN PGP SIGNATURE-----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=8ZFL
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-04-20' of https://gitlab.com/thuth/qemu into staging
* Compat machines for version 8.1
* Allow setting a chardev input file on the command line
* Fix .travis.yml to work with non-public Travis instances, too
* Move a lot of code from specifc_ss into softmmu_ss
* Add a test case for TPM TIS I2C connected to Aspeed I2C controller
* Update tests/vm/freebsd to version 13
* Some more misc minor fixes here and there
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmRBDtMRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXfjw//UYytlyZsDOLAMfFNGQViMmVf29KbrDRe
# doDh4Nl1oZLNKm9C5XlQExhsRbLm6Hi9nyQvSCJs4CvZ1jBY6U7GfgMNIaozXWb3
# 4gQyJb9ACe/z8bQmPUVF2sdW1QZ9zpf8LWpCOTGUZiI2Tevzkz7b/F5ZxiQiseG6
# dXe8UIwdZhG4jz2+6viqjHiGlKoBkegGYoJthcwnR07aRz2woiNr7rKRiJEiv2G7
# UfMVB96uLkpEhaDoohz440/rjviazO1nt6HDvgEajXT1X5P/8phT9IvT7olAZXZH
# R2Qm6YyYcSWavoPms3AryAWG8FjomcyBjuebfAVW5/x+fl/401sn9quBMoZrYPEX
# dfzF64vVokdXNQEH6+qc95PdB6/+d0CZPY8ilMRtAttf2sMw7IgqhG3zDLbj9t6R
# dns2/DY9zu2pp07IEAXn/iVbW4rl2HADUQncr6B/cPy++lYiFvv7LX8OE+YWOsk0
# gvxzYx6rRhr5j7xT1sP30pLwsG3mX7qRDfba1Bt19CzSbu7UGN+w+S1xclgZDoqE
# 0AZIeVUuqqNTEoBLoa2xHUDGs9NjeI2+qIh0R5csS/bqDscLXj0cOluvJO48n4Rt
# +SGQSCSmU/lxn6EbBz4tw3orlp0clBH9fEaSg9lYxuUTYvQOpdYS7u4d63VQFvzp
# dwQ9LRDFNsA=
# =8ZFL
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 20 Apr 2023 11:07:15 AM BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-04-20' of https://gitlab.com/thuth/qemu: (23 commits)
tests/vm/freebsd: Update to FreeBSD 13.2
qtest: Add a test case for TPM TIS I2C connected to Aspeed I2C controller
qtest: Move tpm_util_tis_transmit() into tpm-tis-utils.c and rename it
qtest: Add functions for accessing devices on Aspeed I2C controller
MAINTAINERS: Add Juan Quintela to developer guides review
cpu: Remove parameter of list_cpus()
hw/core: Move numa.c into the target independent source set
softmmu: Move dirtylimit.c into the target independent source set
hw/display: Compile vga.c as target-independent code
softmmu: Make qtest.c target independent
include/exec: Provide the tswap() functions for target independent code, too
softmmu/qtest: Move the target-specific pseries RTAS code out of qtest.c
hw/char: Move two more files from specific_ss to softmmu_ss
target/i386: Set family/model/stepping of the "max" CPU according to LM bit
tests/migration: Only run auto_converge in slow mode
travis.yml: Add missing 'flex', 'bison' packages to 'GCC (user)' job
travis.yml: Add missing clang-10 package to the 'Clang (disable-tcg)' job
chardev: Allow setting file chardev input file on the command line
qtest: Don't assert on "-qtest chardev:myid"
test: Fix test-crypto-secret when compiling without keyring support
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a test case for the TPM TIS I2C device exercising most of its
functionality, including localities.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Ninad Palsule<ninad@linux.ibm.com>
Message-id: 20230331173051.3857801-4-stefanb@linux.ibm.com
To be able to remove tpm_tis_base_addr from test cases that do not really
need it move the tpm_util_tis_transmit() function into tpm-tis-utils.c and
rename it to tpm_tis_transmit().
Fix a locality parameter in a test case on the way.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230331173051.3857801-3-stefanb@linux.ibm.com
Add read and write functions for accessing registers of I2C devices
connected to the Aspeed I2C controller.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230331173051.3857801-2-stefanb@linux.ibm.com
Add a new buildroot image based test that attaches a TPM emulator to the
I2C bus and checks for a known PCR0 value for the image that was booted.
Note that this does not tear down swtpm process when qemu execution fails.
The swtpm process will exit when qemu exits if a connection has been
made, but if the test errors before connection then the swtpm process
will still be around.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Message-id: 20230328120844.190914-1-joel@jms.id.au
According to QEMU's support policy, we stop supporting the previous
major release two years after the the new major release has been
published. So we can stop testing FreeBSD 12 now and should switch
our FreeBSD VM to version 13 instead.
Some changes are needed for this update: The downloadable .ISO images
do not use the serial port as console by default anymore, so they
are not usable in the same way as with FreeBSD 12. Fortunately, the
FreeBSD project now also offers some pre-installed CI images that
have the serial console enabled, so we can use those now, with the
benefit that we can skip almost all parts of the previous installation
process.
Message-Id: <20230419144553.719749-1-thuth@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a test case for the TPM TIS I2C device exercising most of its
functionality, including localities.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Ninad Palsule<ninad@linux.ibm.com>
Message-Id: <20230331173051.3857801-4-stefanb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
To be able to remove tpm_tis_base_addr from test cases that do not really
need it move the tpm_util_tis_transmit() function into tpm-tis-utils.c and
rename it to tpm_tis_transmit().
Fix a locality parameter in a test case on the way.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230331173051.3857801-3-stefanb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add read and write functions for accessing registers of I2C devices
connected to the Aspeed I2C controller.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Message-Id: <20230331173051.3857801-2-stefanb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230412142001.16501-3-quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Cubieboard tests end with comment "reboot not functioning; omit test".
Fix this so reboot is done at the end of each test.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20230326202256.22980-5-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since OpenSUSE Leap 15 counts as a single major release of an LTS distribution,
lcitool has changed the target name to remove the minor version. Adjust the
mappings and refresh script.
This also updates the dockerfile to 15.4, since the 15.3 version is EOL now:
https://get.opensuse.org/leap/15.3
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <a408b7f241ac59e5944db6ae2360a792305c36e0.1681735482.git.pkrempa@redhat.com>
[Adjust for target name change and reword commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update to commit which has fixes needed for OpenSUSE 15.4 and
re-generate output files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <bd11b5954d3dd1e989699370af2b9e2e0c77194a.1681735482.git.pkrempa@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coverity complains that memset() writes over a const field. Use
an initializer instead, so that the const field is left to zero.
Tests that have to write the const field already use an initializer
for the whole struct, here I am choosing the smallest possible
patch (which is not that small already).
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux keyring support is protected by CONFIG_KEYUTILS.
We also need CONFIG_SECRET_KEYRING.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230414114252.1136-1-quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Exercise guests with a few different modes for interrupt delivery. In
particular we want to cover:
• Xen event channel delivery via GSI to the I/O APIC
• Xen event channel delivery via GSI to the i8259 PIC
• MSIs routed to PIRQ event channels
• GSIs routed to PIRQ event channels
As well as some variants of normal non-Xen stuff like MSI to vAPIC and
PCI INTx going to the I/O APIC and PIC, which ought to still work even
in Xen mode.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230403134920.2132362-12-alex.bennee@linaro.org>
Currently our NetBSD VM recipe requests instal of the python37 package
and explicitly tells QEMU to use that version of python. Since the
NetBSD base ISO was updated to version 9.3 though, the default system
python version is 3.9 which is sufficiently new for QEMU to rely on.
Rather than requesting an older python, just test against the default
system python which is what most users will have.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230329124601.822209-1-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230403134920.2132362-10-alex.bennee@linaro.org>
The 'check' script will use "#!/usr/bin/env python3" by default
to locate python, but this doesn't work in distros which lack a
bare 'python3' binary like NetBSD.
We need to explicitly invoke 'check' by referring to the 'python'
variable in meson, which resolves to the detected python binary
that QEMU intends to use.
This fixes a regression introduced by
commit 51ab5f8bd7
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Mar 15 17:43:23 2023 +0000
iotests: register each I/O test separately with meson
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230329124539.822022-1-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230403134920.2132362-9-alex.bennee@linaro.org>
Now that the previous commit ("hw/mips/gt64xxx_pci: Don't
endian-swap GT_PCI0_CFGADDR") fixed the issue accessing
the GT64120 PCI config-address register on big-endian
targets, we can enable this TuxRun test.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230223220404.63630-1-philmd@linaro.org>
The TAP protocol version line must be the first thing printed on
stdout. The migration test failed that requirement in certain
scenarios:
# Skipping test: Userfault not available (builtdtime)
TAP version 13
# random seed: R02Sc120c807f11053eb90bfea845ba1e368
1..32
# Start of x86_64 tests
# Start of migration tests
....
The TAP version is printed by g_test_init(), so we need to make
sure that any methods which print are run after that.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230317170553.592707-1-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Now that meson directly invokes the individual I/O tests, the
check-block.sh wrapper script is no longer required.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-9-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-26-alex.bennee@linaro.org>
Currently meson registers a single test that invokes an entire group of
I/O tests, hiding the test granularity from meson. There are various
downsides of doing this
* You cannot ask 'meson test' to invoke a single I/O test
* The meson test timeout can't be applied to the individual
tests
* Meson only gets a pass/fail for the overall I/O test group
not individual tests
* If a CI job gets killed by the GitLab timeout, we don't
get visibility into how far through the I/O tests
execution got.
This switches meson to perform test discovery by invoking 'check' in
dry-run mode. It then registers one meson test case for each I/O
test. Parallel execution remains disabled since the I/O tests do not
use self contained execution environments and thus conflict with
each other.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-8-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-25-alex.bennee@linaro.org>
The current test runner is only safe against parallel execution within
a single instance of the 'check' process, and only if -j is given a
value greater than 2. This prevents running multiple copies of the
'check' process for different test scenarios.
This change switches the output / socket directories to always include
the test name, image format and image protocol. This should allow full
parallelism of all distinct test scenarios. eg running both qcow2 and
raw tests at the same time, or both file and nbd tests at the same
time.
It would be possible to allow for parallelism of the same test scenario
by including the pid, but that would potentially let many directories
accumulate over time on failures, so is not done.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-7-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-24-alex.bennee@linaro.org>
Currently the tests have their stdin inherited from the test harness,
meaning they are connected to a TTY. The QEMU processes spawned by
certain tests, however, modify TTY settings and if the test exits
abnormally the settings might not be restored.
The python test harness thus has some logic which will capture the
initial TTY settings and restore them once all tests are finished.
This does not, however, take into account the possibility of many
copies of the 'check' program running in parallel. With parallel
execution, a later invokation may save the TTY state that QEMU has
already modified, and thus restore bad state leaving the TTY
non-functional.
None of the I/O tests shnould actually be interactive requiring
user input and so they should not require a TTY at all. To avoid
this while TTY save/restore complexity we can connect the test
stdin to /dev/null instead.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-6-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-23-alex.bennee@linaro.org>
Recently meson started complaining that TAP test reports don't include
the TAP protocol version. While this warning is bogus and has since been
removed from Meson, it looks like good practice to include this header
going forward. The GLib library test harness has started unconditionally
printing the version, so this brings the I/O tests into line.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-5-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-22-alex.bennee@linaro.org>
When asking 'check' to list individual tests by invoking it in dry run
mode, it prints the paths to the tests relative to the base of the
I/O test directory.
When asking 'check' to run an individual test, however, it mandates that
only the unqualified test name is given, without any path prefix. This
inconsistency makes it harder to ask for a list of tests and then invoke
each one.
Thus the test listing code is change to flatten the test names, by
printing only the base name, which can be directly invoked.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-4-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-21-alex.bennee@linaro.org>
The 'check' script can be invoked in "dry run" mode, in which case it
merely does test discovery and prints out all their names. Despite only
doing test discovery it still validates that the various QEMU binaries
can be found. This makes it impossible todo test discovery prior to
building QEMU. This is a desirable feature to support, because it will
let meson discover tests.
Fortunately the code in the TestEnv constructor is ordered in a way
that makes this fairly trivial to achieve. We can just short circuit
the constructor after the basic directory paths have been set.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-3-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-20-alex.bennee@linaro.org>
The 'check' script has some rather dubious logic whereby it assumes
that if invoked as a symlink, then it is running from a separate
source tree and build tree, otherwise it assumes the current working
directory is a combined source and build tree.
This doesn't work if you want to invoke the 'check' script using
its full source tree path while still using a split source and build
tree layout. This would be a typical situation with meson if you ask
it to find the 'check' script path using files('check').
Rather than trying to make the logic more magical, add support for
explicitly passing the dirs using --source-dir and --build-dir. If
either is omitted the current logic is maintained.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-2-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-19-alex.bennee@linaro.org>
The openbsd image is 20GB in size, but the automatic partitioning
done by the installer leaves /home with a mere ~3.5 GB of space,
wasting free space across many other partitions that are not
used by our build process:
openbsd$ df
Filesystem 512-blocks Used Avail Capacity Mounted on
/dev/sd0a 1229692 213592 954616 18% /
/dev/sd0k 7672220 40 7288572 0% /home
/dev/sd0d 1736604 24 1649752 0% /tmp
/dev/sd0f 4847676 2505124 2100172 54% /usr
/dev/sd0g 1326684 555656 704696 44% /usr/X11R6
/dev/sd0h 4845436 1445932 3157236 31% /usr/local
/dev/sd0j 10898972 4 10354020 0% /usr/obj
/dev/sd0i 3343644 4 3176460 0% /usr/src
/dev/sd0e 2601212 19840 2451312 1% /var
This change tells the installer todo custom partitioning with
4 GB on /, 256 MB swap, and the remaining ~15GB for /home
openbsd$ df
Filesystem 512-blocks Used Avail Capacity Mounted on
/dev/sd0a 7932412 4740204 2795588 63% /
/dev/sd0d 32164636 40 30556368 0% /home
This will avoid ENOSPC failures when tests that need to create
big files (disk images) run in parallel.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230322123639.836104-3-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
As a VM used only for automated testing there is no need to
install the X11 stack.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230322123639.836104-2-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We are abusing the avocado tags which are intended to provide test
selection metadata to provide parameters to our test. This works OK up
until the point you need to have ,'s in the field as this is the tag
separator character which is the case for a number of the drive
parameters. Fix this by making drive a parameter to the common helper
function.
Fixes: 267fe57c23 (tests: add tuxrun baseline test to avocado)
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-11-alex.bennee@linaro.org>
So you can do:
cd tests/tcg/aarch64-linux-user
make -f ../Makefile.target help
To see the list of tests. You can then run each one individually.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230315174331.2959-8-alex.bennee@linaro.org>
It seems we also need to pass DOCKER_BUILDKIT as an argument to docker
itself to get the full benefit of caching.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230315174331.2959-3-alex.bennee@linaro.org>
The core of the test was utilising "ethtool -t eth1 offline" to run
through a test sequence. For reasons unknown the test hangs under some
configurations of the build on centos8-stream. Fundamentally running
the old fedora-31 cloud-init is just too much for something that is
directed at testing one device. So we:
- replace fedora with a custom kernel + buildroot rootfs
- rename the test from IGB to NetDevEthtool
- re-factor the common code, add (currently skipped) tests for other
devices which support ethtool
- remove the KVM limitation as its fast enough to run in KVM or TCG
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230322145529.4079753-1-alex.bennee@linaro.org>
A recent attempt to let avocado run more tests on the CentOS stream
build failed because there was no gating on the multiprocess feature.
Like missing accelerators avocado should gracefully skip when the
feature is not enabled.
In this case we use the existence of the proxy device as a proxy for
multi-process support.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Cc: Jagannathan Raman <jag.raman@oracle.com>
Cc: John G Johnson <john.g.johnson@oracle.com>
Message-Id: <20230321111752.2681128-1-alex.bennee@linaro.org>
To test Alpine boot on SBSA-Ref target we need Alpine Linux
'standard' image as 'virt' one lacks kernel modules.
So to minimalize Avocado cache I move test to 'standard' image.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302191146.1790560-1-marcin.juszkiewicz@linaro.org>
Message-Id: <20230315174331.2959-2-alex.bennee@linaro.org>
Bring the files in line with the QEMU coding style, with spaces
for indentation.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/378
Signed-off-by: Yeqi Fu <fufuyqqqqqq@gmail.com>
Message-Id: <20230315032649.57568-1-fufuyqqqqqq@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The blockjob/complete_in_standby test is flaky and fails
intermittently in CI:
172/621 qemu:unit / test-blockjob
ERROR 0.26s killed by signal 6 SIGABRT
11:03:46 MALLOC_PERTURB_=176
G_TEST_SRCDIR=/Users/pm215/src/qemu-for-merges/tests/unit
G_TEST_BUILDDIR=/Users/pm215/src/qemu-for-merges/build/all/tests/unit
/Users/pm215/src/qemu-for-merges/build/all/tests/unit/test-blockjob
--tap -k
----------------------------------- output -----------------------------------
stdout:
# random seed: R02S8c79d6e1c01ce0b25475b2210a253242
1..9
# Start of blockjob tests
ok 1 /blockjob/ids
stderr:
Assertion failed: (job->status == JOB_STATUS_STANDBY), function
test_complete_in_standby, file ../../tests/unit/test-blockjob.c, line
499.
Seen on macOS/x86_64, FreeBSD 13/x86_64, msys2-64bit, eg:
https://gitlab.com/qemu-project/qemu/-/jobs/3872508803https://gitlab.com/qemu-project/qemu/-/jobs/3950667240
Disable this subtest until somebody has time to investigate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230317143534.1481947-1-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a number of small test that check whether accessing unaligned
addresses in various ways leads to a specification exception.
Run these test both in softmmu and user configurations; expect a PGM
in one case and SIGILL in the other.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230316164428.275147-13-iii@linux.ibm.com>
[thuth: Added -Wl,--build-id=none to LDFLAGS]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Test EXECUTE and EXECUTE RELATIVE LONG with relative long instructions
as targets.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-Id: <20230316210751.302423-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test for RXSBG with T=1 to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230316172205.281369-3-iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add several small tests that check the PSW modification instructions:
* lpsw.S checks whether LPSW works correctly in the "happy" case.
* lpswe-early.S checks whether early exceptions are recognized and
whether the correct ILC and old PSW are stored when they happen.
* ssm-early.S, stosm-early.S and exrl-ssm-early.S check the special
handling of SSM and STOSM with respect to early exceptions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230315020408.384766-4-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Don't disable all big-endian tests, instead check whether $(CORE) is
supported by the configured $(QEMU) and enable tests if it is.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Linker script for xtensa tests must be preprocessed for a specific
target, remove it as a part of make clean.
Fixes: be5cac175a ("tests/tcg/xtensa: enable system tests")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Allow to build & use the DBus display without 3d/GPU acceleration support.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that qtest_qmp_add_client() works on win32, we can enable the VNC
test.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230306122751.2355515-11-marcandre.lureau@redhat.com>
Use the "get-win32-socket" function to pass an opened socket to QEMU,
instead of using "getfd", which relies on socket ancillary FD message
passing.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230306122751.2355515-10-marcandre.lureau@redhat.com>
docker.py is run during configure, and produces an error: No module
named 'pwd'.
Use a more portable and recommended alternative to lookup the user
"login name".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230306122751.2355515-4-marcandre.lureau@redhat.com>
Use a close() wrapper instead, so that we don't need to worry about
closesocket() vs close() anymore, let's hope.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20230221124802.4103554-17-marcandre.lureau@redhat.com>
This can help debugging issues or develop, when error handling is
introduced.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20230221124802.4103554-6-marcandre.lureau@redhat.com>
Because they are actually sockets...
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230221124802.4103554-3-marcandre.lureau@redhat.com>
Test COMPARE HALFWORD RELATIVE LONG instructions.
Test that the bytes following the second operand do not affect the
instruction.
Test the sign extension performed on the second operand.
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230310114157.3024170-3-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas found an autoconverge test failure where the
migration completed before the autoconverge had kicked in.
To try and avoid this again:
a) Reduce the usleep in test_migrate_auto_converge
so that it should exit quicker when autoconverge kicks in
b) Make the loop exit immediately rather than have the sleep
when it does start autoconverge, otherwise the autoconverge
might succeed during the sleep.
c) Reduce inc_pct so auto converge happens more slowly
d) Reduce the max-bandwidth in migrate_ensure_non_converge
to make the ensure more ensure.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20230306152612.52291-1-dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Several features that landed at the last possible moment:
Passthrough HDM decoder emulation
Refactor cryptodev
RAS error emulation and injection
acpi-index support on non-hotpluggable slots
Dynamically switch to vhost shadow virtqueues at vdpa net migration
Plus a couple of bugfixes that look important to have in the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQJ8TYPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp37YIAMpQA5/ddmKKz/ABtBMHB5JX/SVYcG+1xkBR
j9IFYusOfmmDfmgAhv0Qxi9+Wik95lszVZUnphvocSGd0PXH47pK7yv9RZ1ttaYX
oAbXrGqXo8rUhl1ksQsJ8Iasj2di1BLP0byPuozbRkg1Kkz5TqRd9+hBqSBGEx21
tsP5708UVCDAriwYYO78Cx0ZasmB9bqqeom5FdEsg9sYJ5aElOOvitp9YO1p2xhU
gRvhD+k/aqNi+mfOUF7qGDBanxKgx75VV/KU1cjjS9R1vNtwRhfc/26PBrROY00a
wkZWnAxmzDFKRS6cEfeb+eDGEVjC3IqLAjcFeuAIT/78CwdvIiY=
=e1yv
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes
Several features that landed at the last possible moment:
Passthrough HDM decoder emulation
Refactor cryptodev
RAS error emulation and injection
acpi-index support on non-hotpluggable slots
Dynamically switch to vhost shadow virtqueues at vdpa net migration
Plus a couple of bugfixes that look important to have in the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQJ8TYPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp37YIAMpQA5/ddmKKz/ABtBMHB5JX/SVYcG+1xkBR
# j9IFYusOfmmDfmgAhv0Qxi9+Wik95lszVZUnphvocSGd0PXH47pK7yv9RZ1ttaYX
# oAbXrGqXo8rUhl1ksQsJ8Iasj2di1BLP0byPuozbRkg1Kkz5TqRd9+hBqSBGEx21
# tsP5708UVCDAriwYYO78Cx0ZasmB9bqqeom5FdEsg9sYJ5aElOOvitp9YO1p2xhU
# gRvhD+k/aqNi+mfOUF7qGDBanxKgx75VV/KU1cjjS9R1vNtwRhfc/26PBrROY00a
# wkZWnAxmzDFKRS6cEfeb+eDGEVjC3IqLAjcFeuAIT/78CwdvIiY=
# =e1yv
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 09 Mar 2023 14:46:14 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (72 commits)
virtio: fix reachable assertion due to stale value of cached region size
hw/virtio/vhost-user: avoid using unitialized errp
hw/pxb-cxl: Support passthrough HDM Decoders unless overridden
hw/pci: Add pcie_count_ds_port() and pcie_find_port_first() helpers
hw/mem/cxl_type3: Add CXL RAS Error Injection Support.
hw/pci/aer: Make PCIE AER error injection facility available for other emulation to use.
hw/cxl: Fix endian issues in CXL RAS capability defaults / masks
hw/mem/cxl-type3: Add AER extended capability
hw/pci-bridge/cxl_root_port: Wire up MSI
hw/pci-bridge/cxl_root_port: Wire up AER
hw/pci/aer: Add missing routing for AER errors
hw/pci/aer: Implement PCI_ERR_UNCOR_MASK register
pcihp: add ACPI PCI hotplug specific is_hotpluggable_bus() callback
pcihp: move fields enabling hotplug into AcpiPciHpState
acpi: pci: move out ACPI PCI hotplug generator from generic slot generator build_append_pci_bus_devices()
acpi: pci: move BSEL into build_append_pcihp_slots()
acpi: pci: drop BSEL usage when deciding that device isn't hotpluggable
pci: move acpi-index uniqueness check to generic PCI device code
tests: acpi: update expected blobs
tests: acpi: add non zero function device with acpi-index on non-hotpluggble bus
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Try writing zeroes to a FUSE export while allowing the area to be
unmapped; block/file-posix.c generally implements writing zeroes with
BDRV_REQ_MAY_UNMAP ('write -zu') by calling fallocate(PUNCH_HOLE). This
used to lead to a blk_pdiscard() in the FUSE export, which may or may
not lead to the area being zeroed. HEAD^ fixed this to use
blk_pwrite_zeroes() instead (again with BDRV_REQ_MAY_UNMAP), so verify
that running `qemu-io 'write -zu'` on a FUSE exports always results in
zeroes being written.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230227104725.33511-3-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This automates ethtool tests for igb registers, interrupts, etc.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This change is derived from qtest for e1000e device.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Thomas Huth <thuth@redhat.com>
[Jason: make qtest work for win32 (only hotplug)]
Signed-off-by: Jason Wang <jasowang@redhat.com>
They will be useful for igb testing.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
e1000e understands ethernet header so fabricate something convincing.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
- split user and softmmu code
- use cleaner headers for tb_flush, target_ulong
- probe for gdb multiarch support at configure
- make syscall handling target independent
- add update guest debug of accel ops
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmQHomMACgkQ+9DbCVqe
KkTtFAf/aEyKY0iUNxtB4/oV1L2VnLaZi+iKoZT4RQgrhOhzr5WV6/3/V05cw1RJ
SIwcl8wB4gowYILs44eM/Qzcixiugl++2rvM4YVXiQyWKzkH6sY4X2iFuPGTwHLp
y+E7RM77QNS7M9xYaVkdsQawnbsgjG67wZKbb88aaekFEn61UuDg1V2Nqa2ICy7Y
/8yGIB2ixDfXOF0z4g8NOG44BXTDBtJbcEzf5GMz6D4HGnPZUbENy1nT0OcBk3zK
PqKPNkPFZ360pqA9MtougjZ3xTBb7Afe9nRRMquV2RoFmkkY2otSjdPBFQu5GBlm
NyTXEzjIQ6tCZlbS0eqdPVrUHHUx9g==
=Al36
-----END PGP SIGNATURE-----
Merge tag 'pull-gdbstub-070323-3' of https://gitlab.com/stsquad/qemu into staging
gdbstub refactor:
- split user and softmmu code
- use cleaner headers for tb_flush, target_ulong
- probe for gdb multiarch support at configure
- make syscall handling target independent
- add update guest debug of accel ops
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmQHomMACgkQ+9DbCVqe
# KkTtFAf/aEyKY0iUNxtB4/oV1L2VnLaZi+iKoZT4RQgrhOhzr5WV6/3/V05cw1RJ
# SIwcl8wB4gowYILs44eM/Qzcixiugl++2rvM4YVXiQyWKzkH6sY4X2iFuPGTwHLp
# y+E7RM77QNS7M9xYaVkdsQawnbsgjG67wZKbb88aaekFEn61UuDg1V2Nqa2ICy7Y
# /8yGIB2ixDfXOF0z4g8NOG44BXTDBtJbcEzf5GMz6D4HGnPZUbENy1nT0OcBk3zK
# PqKPNkPFZ360pqA9MtougjZ3xTBb7Afe9nRRMquV2RoFmkkY2otSjdPBFQu5GBlm
# NyTXEzjIQ6tCZlbS0eqdPVrUHHUx9g==
# =Al36
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Mar 2023 20:45:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-gdbstub-070323-3' of https://gitlab.com/stsquad/qemu: (30 commits)
gdbstub: move update guest debug to accel ops
gdbstub: Build syscall.c once
stubs: split semihosting_get_target from system only stubs
gdbstub: Adjust gdb_do_syscall to only use uint32_t and uint64_t
gdbstub: Remove gdb_do_syscallv
gdbstub: split out softmmu/user specifics for syscall handling
include: split target_long definition from cpu-defs
testing: probe gdb for supported architectures ahead of time
gdbstub: only compile gdbstub twice for whole build
gdbstub: move syscall handling to new file
gdbstub: move register helpers into standalone include
gdbstub: don't use target_ulong while handling registers
gdbstub: fix address type of gdb_set_cpu_pc
gdbstub: specialise stub_can_reverse
gdbstub: introduce gdb_get_max_cpus
gdbstub: specialise target_memory_rw_debug
gdbstub: specialise handle_query_attached
gdbstub: abstract target specific details from gdb_put_packet_binary
gdbstub: rationalise signal mapping in softmmu
gdbstub: move chunks of user code into own files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Deprecate 32-bit x86 and arm hosts for system emulation
* Check bison version to be >= 3.0
* Compile vnc test only if vnc is really enabled
* Check docs/config/ich9-ehci-uhci.cfg via the readconfig-test
* s390x: Add support for list-directed IPL from ECKD DASD
-----BEGIN PGP SIGNATURE-----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=p13b
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-03-07' of https://gitlab.com/thuth/qemu into staging
* Refine the distro support policy
* Deprecate 32-bit x86 and arm hosts for system emulation
* Check bison version to be >= 3.0
* Compile vnc test only if vnc is really enabled
* Check docs/config/ich9-ehci-uhci.cfg via the readconfig-test
* s390x: Add support for list-directed IPL from ECKD DASD
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmQIQD0RHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbX+EA/5ATc/Rz9Y8TZF36/sUKrmjOxQnX91hgRW
# zovgZejoHtek1AC4pLd9kcpo1JonXkOfmbkNRYTw6+1wY6Ipt2apkWAc+MqfvQ80
# dGznbLXnX/E2QHW7h5XqvAhRGvjog9b38zAQcR37PKZ9DkSfWBwMgTT2SXYpLUjR
# YWgqPGBYRq1ViG4q7hv2dHqi/idzh+DOWFGU5NAQC1fEBOmPYN9u6vfbX86dwZsy
# S9pqw16yN2MZKL2bgIViFIjdhPPMO3RFcv8NTPipzk3g/pHNIv58+xCE8r/Tp8LW
# JRQzdh6JbGvj1BXH68igXWGUFW6dhOXZWhgmFe4QEDaiCj91pHGvQCYgo2agx2bl
# rXaSQXSMhIcm+t9C9kO6UNxZf+1HohcM1ZlQXhvX6FcBPVMUx/52YEpiK+OtBKyq
# 43AlKp4fp1xXLFSOyMNgSMR90sksng6CEoQqTr0jCZtF8H18wb+eHfb6dME3XRCw
# SKQeNGhkP1FxaQnlRAkeBxW7GkDE5YBjf9pSIaLZ/8VsLdyo3SK/DLkre5+qnu/V
# lksZlt1K7xDLxRFopBuVJ3MHeFSRazBDbWfrRFOALkdbGEEeZnnmEPFjD3mag+P4
# 1y9WmBJHRLlvhlm195WA8babenUZoOfLkPrL0k7mNLs9sZyx1eIkZfOUgCWjFE2V
# 9VBOWL8oi/w=
# =p13b
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 08 Mar 2023 07:58:53 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-03-07' of https://gitlab.com/thuth/qemu:
pc-bios/s390-ccw: Update s390-ccw.img with the list-directed IPL fix
pc-bios: Add support for List-Directed IPL from ECKD DASD
docs/config: Set the "kvm" accelerator via "[accel]" section
tests/qtest/readconfig: Test docs/config/ich9-ehci-uhci.cfg
tests/qtest/readconfig: Rework test_object_rng_resp into a generic function
gitlab-ci.d/crossbuilds: Drop the 32-bit arm system emulation jobs
docs/about/deprecated: Deprecate 32-bit arm hosts for system emulation
gitlab-ci.d/crossbuilds: Drop the i386 system emulation job
docs/about/deprecated: Deprecate 32-bit x86 hosts for system emulation
include/hw/i386: Clean up includes in x86.h
test: Check vnc enable before compiling vnc test
Hexagon (meson.build): define min bison version
docs/about/build-platforms: Refine the distro support policy
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We've got some sample config files in docs/config/ but no means
of regression checking them. Thus let's test them in our readconfig
qtest, starting with ich9-ehci-uhci.cfg. Note: To enable the test
to read the config files from the build folder, we have to install
a symlink for docs/config in the build directory.
Message-Id: <20230228211533.201837-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
test_object_rng_resp() can be reworked quite easily to allow
testing for arbitrary objects in the qom-list response.
Message-Id: <20230228211533.201837-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently when we encounter a gdb that is old or not built with
multiarch in mind we fail rather messily. Try and improve the
situation by probing ahead of time and setting
HOST_GDB_SUPPORTS_ARCH=y in the relevant tcg configs. We can then skip
and give a more meaningful message if we don't run the test.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230302190846.2593720-24-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-24-richard.henderson@linaro.org>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-28-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-27-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-24-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-21-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-20-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-17-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-14-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
follow up fix for missing root-port AML will affect these tests
by adding non-hotpluggable Device descriptors of colplugged
bridges when bridge hotplug is disabled.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-9-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following corner case wasn't covered:
-device pcie-root-port,id=NO_HOTPLUG,hotplug=off
-device pcie-root-port,bus=NO_HOTPLUG
when intermediate root-port has explicitly disabled hotplug,
all hierarchy below it is not described anymore (used to be
described in 7.2)
So as result we see only NO_HOTPLUG root-port described
+ Device (S50)
+ {
+ Name (_ADR, 0x000A0000) // _ADR: Address
+ }
and no children nor notification chain for them are being composed.
Follow up patches will fix missing leaf root-port descriptor
and notification chain that should accompany it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
expected changes:
Basically adds devices present on root bus in form:
Device (SXX)
{
Name (_ADR, 0xYYYYYYYY) // _ADR: Address
}
On top of that For q35.noacpihp, all ACPI PCI hotplug
AML is removed and _OSC get native hotplug enabled:
CreateDWordField (Arg3, 0x04, CDW2)
CreateDWordField (Arg3, 0x08, CDW3)
Local0 = CDW3 /* \_SB_.PCI0._OSC.CDW3 */
- Local0 &= 0x1E
+ Local0 &= 0x1F
If ((Arg1 != One))
{
CDW1 |= 0x08
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
test bridge AML generator with ACPI PCI hotplug disabled
(i.e. with native hotplug enabled/disabled per bridge/root port)
PS:
while at make sure that devices on pci-bridge are starting
from addr=1.0 as slot 0 is not available there and test
passes only because of a bug in ACPI hotplug that will be
fixed by follow up patch
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
for q35.noacpihp use plain default Q35 DSDT table as a starting point.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit c471eb4f40.
which broke acpi tables test and rebuild due to skipping some tests
even thought none of devices tests depend on weren't disabled.
As result it leads to some expected tables not being updated,
merge conflicts and tests failure.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-2-imammedo@redhat.com>
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This implements the basic migration support in the back end, with unit
tests that give additional confidence in the node-counting already in
the tree.
However, the existing PV back ends like xen-disk don't support migration
yet. They will reset the ring and fail to continue where they left off.
We will fix that in future, but not in time for the 8.0 release.
Since there's also an open question of whether we want to serialize the
full XenStore or only the guest-owned nodes in /local/domain/${domid},
for now just mark the XenStore device as unmigratable.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Store perms as a GList of strings, check permissions.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Firing watches on the nodes that still exist is relatively easy; just
walk the tree and look at the nodes with refcount of one.
Firing watches on *deleted* nodes is more fun. We add 'modified_in_tx'
and 'deleted_in_tx' flags to each node. Nodes with those flags cannot
be shared, as they will always be unique to the transaction in which
they were created.
When xs_node_walk would need to *create* a node as scaffolding and it
encounters a deleted_in_tx node, it can resurrect it simply by clearing
its deleted_in_tx flag. If that node originally had any *data*, they're
gone, and the modified_in_tx flag will have been set when it was first
deleted.
We then attempt to send appropriate watches when the transaction is
committed, properly delete the deleted_in_tx nodes, and remove the
modified_in_tx flag from the others.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Given that the whole thing supported copy on write from the beginning,
transactions end up being fairly simple. On starting a transaction, just
take a ref of the existing root; swap it back in on a successful commit.
The main tree has a transaction ID too, and we keep a record of the last
transaction ID given out. if the main tree is ever modified when it isn't
the latest, it gets a new transaction ID.
A commit can only succeed if the main tree hasn't moved on since it was
forked. Strictly speaking, the XenStore protocol allows a transaction to
succeed as long as nothing *it* read or wrote has changed in the interim,
but no implementations do that; *any* change is sufficient to abort a
transaction.
This does not yet fire watches on the changed nodes on a commit. That bit
is more fun and will come in a follow-on commit.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Starts out fairly simple: a hash table of watches based on the path.
Except there can be multiple watches on the same path, so the watch ends
up being a simple linked list, and the head of that list is in the hash
table. Which makes removal a bit of a PITA but it's not so bad; we just
special-case "I had to remove the head of the list and now I have to
replace it in / remove it from the hash table". And if we don't remove
the head, it's a simple linked-list operation.
We do need to fire watches on *deleted* nodes, so instead of just a simple
xs_node_unref() on the topmost victim, we need to recurse down and fire
watches on them all.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This is a fairly simple implementation of a copy-on-write tree.
The node walk function starts off at the root, with 'inplace == true'.
If it ever encounters a node with a refcount greater than one (including
the root node), then that node is shared with other trees, and cannot
be modified in place, so the inplace flag is cleared and we copy on
write from there on down.
Xenstore write has 'mkdir -p' semantics and will create the intermediate
nodes if they don't already exist, so in that case we flip the inplace
flag back to true as we populate the newly-created nodes.
We put a copy of the absolute path into the buffer in the struct walk_op,
with *two* NUL terminators at the end. As xs_node_walk() goes down the
tree, it replaces the next '/' separator with a NUL so that it can use
the 'child name' in place. The next recursion down then puts the '/'
back and repeats the exercise for the next path element... if it doesn't
hit that *second* NUL termination which indicates the true end of the
path.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The F2_sffms instruction [r0 -= sfmpy(r1, r2)] doesn't properly
handle -0. Previously we would negate the input operand by subtracting
from zero. Instead, we negate by changing the sign bit.
Test case added to tests/tcg/hexagon/fpstuff.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230307025828.1612809-12-tsimpson@quicinc.com>
Made possible by new toolchain container
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230307025828.1612809-11-tsimpson@quicinc.com>
Replace __builtin_* with inline assembly
The __builtin's are subject to change with different compiler
releases, so might break
Mark arrays as aligned when accessed as HVX vectors
Clean up comments
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230307025828.1612809-10-tsimpson@quicinc.com>
Add control registers (c4, c5) to clobbers list
Made possible by new toolchain container
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230307025828.1612809-9-tsimpson@quicinc.com>
migration-test has been flaky for a long time, both in CI and
otherwise:
https://gitlab.com/qemu-project/qemu/-/jobs/3806090216
(a FreeBSD job)
32/648 ERROR:../tests/qtest/migration-helpers.c:205:wait_for_migration_status: assertion failed: (g_test_timer_elapsed() < MIGRATION_STATUS_WAIT_TIMEOUT) ERROR
on a local macos x86 box:
▶ 34/621 ERROR:../../tests/qtest/migration-helpers.c:151:migrate_query_not_failed: assertion failed: (!g_str_equal(status, "failed")) ERROR
34/621 qemu:qtest+qtest-i386 / qtest-i386/migration-test ERROR 168.12s killed by signal 6 SIGABRT
――――――――――――――――――――――――――――――――――――― ✀ ―――――――――――――――――――――――――――――――――――――
stderr:
qemu-system-i386: Failed to peek at channel
query-migrate shows failed migration: Unable to write to socket: Broken pipe
**
ERROR:../../tests/qtest/migration-helpers.c:151:migrate_query_not_failed: assertion failed: (!g_str_equal(status, "failed"))
(test program exited with status code -6)
――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
▶ 37/621 ERROR:../../tests/qtest/migration-helpers.c:151:migrate_query_not_failed: assertion failed: (!g_str_equal(status, "failed")) ERROR
37/621 qemu:qtest+qtest-x86_64 / qtest-x86_64/migration-test ERROR 174.37s killed by signal 6 SIGABRT
――――――――――――――――――――――――――――――――――――― ✀ ―――――――――――――――――――――――――――――――――――――
stderr:
query-migrate shows failed migration: Unable to write to socket: Broken pipe
**
ERROR:../../tests/qtest/migration-helpers.c:151:migrate_query_not_failed: assertion failed: (!g_str_equal(status, "failed"))
(test program exited with status code -6)
In the cases where I've looked at the underlying log, this seems to
be in the migration/multifd/tcp/plain/cancel subtest. Disable that
specific subtest by default until somebody can track down the
underlying cause. Enthusiasts can opt back in by setting
QEMU_TEST_FLAKY_TESTS=1 in their environment.
We might need to disable more parts of this test if this isn't
sufficient to fix the flakiness.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230302172211.4146376-1-peter.maydell@linaro.org
* fix for the Aspeed I2C slave mode
* a new I2C echo device from Klaus and its associated test in avocado.
* initial SoC cleanups to allow the use of block devices instead of
drives on the command line.
* new facebook machines and eeprom fixes for the Fuji
* readline fix
-----BEGIN PGP SIGNATURE-----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=ExnJ
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20230302' of https://github.com/legoater/qemu into staging
aspeed queue:
* fix for the Aspeed I2C slave mode
* a new I2C echo device from Klaus and its associated test in avocado.
* initial SoC cleanups to allow the use of block devices instead of
drives on the command line.
* new facebook machines and eeprom fixes for the Fuji
* readline fix
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmQAnrQACgkQUaNDx8/7
# 7KGIvQ//Te2eSxlZNxAXHb3HSVFRaBW+2EkJzNlalX75olFSzCLe8BnAHK5xPlYv
# JjU0aPjWaPohPLdbNbAsJY2B8AwMGbUTjSv+ORRWF6s97LTVD9WcAYHgOTCz6d2X
# ZrArJ5msEQAFEySOLmBqTcuyW3t4w8XeII+B09HZIS8Gn3F9kX5+4JCw9E4sX8fS
# n9ayclMmrXCPbkGA4bfwJp3KI1Tc/WXNRyG0AmPEmepid7ECr5tVvQoXRMF1Sy/D
# 10qbHEcmQXvZDy85M2ED1niOac4oU+EY8Wvjzkgc36uXcjqf0jIUfw56cwGSNVkW
# MhPXSMiH4tEjgxmtzld3LeA6TGfrFcCvRXYiCuYWHjBS3gptlqY6Q0580vxoQVXL
# lTYui57LB1YStNLcLG9toP0d4/fRfeqEx7ddCQKlopnW/K392eoJo0aYoVGVJhIC
# 3QhN525EFUwMm4FDpdSW29Gfbk/ytpf0u4hQ6JPeBl8psirRKqCGuwr5NOnPYTaN
# yErlsq2eL83t9kLo+2YIqgWic85wNP3kqAjIaE6lminqX7sWFH3V1g9HqUQZVG1g
# msatZMiCCvwSFuz3DPkSfnuhqwaHuhvCATZloCtguCmnbUK9qUVVzvodKw62sZrd
# GdS2XvRNyoOwezz0tDEvPipyZ7RpcaatryHNuzGwRsE5Lvr73dg=
# =ExnJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 02 Mar 2023 13:03:48 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20230302' of https://github.com/legoater/qemu:
aspeed/smc: Replace SysBus IRQs with GPIO lines
aspeed: Add a boot_rom overlap region in the SoC spi_boot container
aspeed: Introduce a spi_boot region under the SoC
aspeed/fuji : correct the eeprom size
hw/at24c : modify at24c to support 1 byte address mode
hw/arm/aspeed: Adding new machine Tiogapass in QEMU
hw/arm/aspeed: Adding new machine Yosemitev2 in QEMU
tests/avocado/machine_aspeed.py: Add an I2C slave test
hw/misc: add a toy i2c echo device
hw/i2c: only schedule pending master when bus is idle
readline: fix hmp completion issue
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vhost-user support without ioeventfd
word replacements in vhost user spec
shpc improvements
cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQBO8QPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpMUMH/3/FVp4qaF4CDwCHn7xWFRJpOREIhX/iWfUu
lGkwxnB7Lfyqdg7i4CAfgMf2emWKZchEE2DamfCo5bIX0IgRU3DWcOdR9ePvJ29J
cKwIYpxZcB4RYSoWL5OUakQLCT3JOu4XWaXeVjyHABjQhf3lGpwN4KmIOBGOy/N6
0YHOQScW2eW62wIOwhAEuYQceMt6KU32Uw3tLnMbJliiBf3a/hPctVNM9TFY9pcd
UYHGfBx/zD45owf1lTVEQFDg0eqPZKWW29g5haiOd5oAyXHHolzu+bt3bU7lH46b
f7iP12LqDudyrgoF5YWv3NJ4HaGm5V3kPqNqLLF/mjF7alxG+N8=
=hN3h
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups, fixes
vhost-user support without ioeventfd
word replacements in vhost user spec
shpc improvements
cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQBO8QPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpMUMH/3/FVp4qaF4CDwCHn7xWFRJpOREIhX/iWfUu
# lGkwxnB7Lfyqdg7i4CAfgMf2emWKZchEE2DamfCo5bIX0IgRU3DWcOdR9ePvJ29J
# cKwIYpxZcB4RYSoWL5OUakQLCT3JOu4XWaXeVjyHABjQhf3lGpwN4KmIOBGOy/N6
# 0YHOQScW2eW62wIOwhAEuYQceMt6KU32Uw3tLnMbJliiBf3a/hPctVNM9TFY9pcd
# UYHGfBx/zD45owf1lTVEQFDg0eqPZKWW29g5haiOd5oAyXHHolzu+bt3bU7lH46b
# f7iP12LqDudyrgoF5YWv3NJ4HaGm5V3kPqNqLLF/mjF7alxG+N8=
# =hN3h
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Mar 2023 00:13:56 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
tests/data/acpi/virt: drop (most) duplicate files.
hw/cxl/mailbox: Use new UUID network order define for cel_uuid
qemu/uuid: Add UUID static initializer
qemu/bswap: Add const_le64()
tests: acpi: Update q35/DSDT.cxl for removed duplicate UID
hw/i386/acpi: Drop duplicate _UID entry for CXL root bridge
tests/acpi: Allow update of q35/DSDT.cxl
hw/cxl: Add CXL_CAPACITY_MULTIPLIER definition
hw/cxl: set cxl-type3 device type to PCI_CLASS_MEMORY_CXL
hw/pci-bridge/cxl_downstream: Fix type naming mismatch
hw/mem/cxl_type3: Improve error handling in realize()
MAINTAINERS: Add Fan Ni as Compute eXpress Link QEMU reviewer
intel-iommu: send UNMAP notifications for domain or global inv desc
smmu: switch to use memory_region_unmap_iommu_notifier_range()
memory: introduce memory_region_unmap_iommu_notifier_range()
intel-iommu: fail DEVIOTLB_UNMAP without dt mode
intel-iommu: fail MAP notifier without caching mode
memory: Optimize replay of guest mapping
chardev/char-socket: set s->listener = NULL in char_socket_finalize
hw/pci: Trace IRQ routing on PCI topology
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When virt ACPI files were added, lots of duplicates were created because
we forgot that there's a no-prefix fallback: e.g. if
tests/data/acpi/virt/APIC.memhp is not there then test will use
tests/data/acpi/virt/APIC.
Drop these.
These were found with
$find tests/data/acpi/ -type f -exec sha256sum '{}' ';'|sort -d|uniq -w 64 --all-repeated=separate
(trick: -d does a dictionary sort so a no-suffix file ends up first).
Note: there are still a bunch of issues with duplicates left even after this.
First pc and q35 are often identical.
Second, sometimes files are identical but not identical to the default
fallback, e.g.
tests/data/acpi/pc/SLIT.cphp and tests/data/acpi/pc/SLIT.memhp
or
tests/data/acpi/q35/HMAT.acpihmat-noinitiator and tests/data/acpi/virt/HMAT.acpihmatvirt
Finding a way to deduplicate these is still a TODO item - softlinks
maybe?
We also need to make rebuild-expected-aml.sh smarter about not creating
these duplicates in the 1st place.
And maybe we should use softlinks instead of relying on a fallback
to make it explicit what version does each test expect?
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Dropping the ID effects this table in trivial fashion.
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Tested-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230206172816.8201-8-Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patch will drop duplicate _UID entry so allow update.
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Tested-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230206172816.8201-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to g_tree_foreach() documentation:
"The tree may not be modified while iterating over it (you can't
add/remove items)."
compare_trees()/diff_tree() fail to respect this rule.
Historically GLib2 used a slice allocator for the GTree APIs
which did not immediately release the memory back to the system
allocator. As a result QEMU's use-after-free bug was not visible.
With GLib > 2.75.3 however, GLib2 has switched to using malloc
and now a SIGSEGV can be observed while running test-vmstate.
Get rid of the node removal within the tree traversal. Also
check the trees have the same number of nodes before the actual
diff.
Fixes: 9a85e4b8f6 ("migration: Support gtree migration")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1518
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The Aspeed 2600 I2C controller supports a slave mode which can be
tested with the I2C echo device. Test extracted from :
https://lists.nongnu.org/archive/html/qemu-devel/2022-06/msg00183.html
Suggested-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This test is exceptionally heavyweight (nearly 330s) compared to the
two (both endians) TuxRun baseline tests which complete in under 160s.
The coverage is slightly reduced but a more directed test could make
up the difference.
tests/avocado/tuxrun_baselines.py:TuxRunBaselineTest.test_ppc64:
Overall coverage rate:
lines......: 9.6% (44110 of 458817 lines)
functions..: 16.5% (6767 of 41054 functions)
branches...: 6.0% (13395 of 222634 branches)
tests/avocado/boot_linux.py:BootLinuxPPC64.test_pseries_tcg:
Overall coverage rate:
lines......: 11.6% (53408 of 458817 lines)
functions..: 18.7% (7691 of 41054 functions)
branches...: 7.9% (17692 of 224218 branches)
So lets skip for GITLAB_CI and save a few CI minutes.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230228190653.1602033-25-alex.bennee@linaro.org>
We need this to be able to run the tuxrun_baseline tests in CI which
in turn helps us reduce overhead running other tests. We need to
update libvirt-ci and refresh the generated files by running 'make
lcitool-refresh' to get the new mapping.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230228190653.1602033-24-alex.bennee@linaro.org>
If we build them without the script we can certainly run them without
it.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230228190653.1602033-22-alex.bennee@linaro.org>
We don't really need stuff from docker.py to do the build as we have
everything we need with a direct call. We do rely on the dockerfiles
being able to tweak the UID/name mapping as the last step.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230228190653.1602033-21-alex.bennee@linaro.org>
These are flat but not generated by lcitool so we need to manually
update them with the `useradd` stanza.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230228190653.1602033-20-alex.bennee@linaro.org>
For the cross-compilation use-case it is important to add the host
user to the dockerfile so we can map them to the docker environment
when cross-building files.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230228190653.1602033-19-alex.bennee@linaro.org>
These two tests were failing with this error:
stderr:
TAP parsing error: version number must be on the first line
[...]
Unknown TAP version. The first line MUST be `TAP version <int>`. Assuming version 12.
This can be fixed by ensuring we always call g_test_init first in the
body of main.
Thanks: Daniel Berrange, for diagnosing the problem
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20230227174019.1164205-1-rjones@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230228190653.1602033-17-alex.bennee@linaro.org>
We use the debian release number elsewhere so fix it for consistency
along with the broken comment.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230228190653.1602033-15-alex.bennee@linaro.org>
since binutils is pretty old, it fails our CI repeatedly during the
compilation of tricore-binutils. We created a precompiled version using
the debian docker image and download it instead of building it ourself.
We also updated the package to include a newer version of binutils, gcc,
and newlib. The default TriCore ISA version used by tricore-as changed
from the old version, so we have to specify it now. If we don't
'test_fadd' fails with 'unknown opcode'.
The new assembler also picks a new encoding in ld.h which fails the
'test_ld_h' test. We fix that by using the newest TriCore CPU for QEMU.
The old assembler accepted an extra ')' in 'test_imask'. The new one
does not, so lets remove it.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230209145812.46730-1-kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230228190653.1602033-12-alex.bennee@linaro.org>
The TuxRun project (www.tuxrun.org) uses QEMU to run tests on a wide
variety of kernel configurations on wide range of our emulated
platforms. They publish a known good set of images at:
https://storage.tuxboot.com/
to help with bisecting regressions in either the kernel, firmware or
QEMU itself. The tests are pretty lightweight as they contain just a
kernel with a minimal rootfs which boots a lot faster than most of the
distros. In time they might be persuaded to version their known good
baselines and we can then enable proper checksums.
For a couple of tests we currently skip:
- mips64, a regression against previous stable release
- sh4, very unstable with intermittent oops
Total run time: 340s (default) -> 890s (debug)
Overall coverage rate (tested targets + disabled tests):
lines......: 16.1% (126894 of 789848 lines)
functions..: 20.6% (15954 of 77489 functions)
branches...: 9.3% (40727 of 439365 branches)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230228190653.1602033-11-alex.bennee@linaro.org>
It is buggy and keeps failing.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230228190653.1602033-10-alex.bennee@linaro.org>
The 22.04 LTS release has been out for almost a year now so its time
to update all the remaining images to the current LTS. We can also
drop some hacks we need for older clang TSAN support.
We will keep the ubuntu2004 container around for those who wish to
test builds on the currently still supported baseline.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230228190653.1602033-9-alex.bennee@linaro.org>
As we like to run tests under CI with V=1 flags the softfloat tests
can add up to a fair amount of extra log lines. With an update to the
testfloat library we can now call fp-test with the -q flag and reduce
the output to a terse one line per function tested.
make check-softfloat V=1 | wc -l
759
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230228190653.1602033-5-alex.bennee@linaro.org>
When we re-factored we dropped the unlink() step which turns out to be
required for rmdir to do its thing. If we had been checking the return
value we would have noticed so lets do that with this fix.
Fixes: 68406d1085 (tests/unit: cleanups for test-io-channel-command)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230228190653.1602033-4-alex.bennee@linaro.org>
We only use it for test-io-channel-command at the moment.
Unfortunately bringing socat into CI exposed an existing bug in the
test-io-channel-command unit test so we disabled it for MacOS in the
previous patch.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230228190653.1602033-3-alex.bennee@linaro.org>
In preparation for the next patch when we enable socat for our CI
images we need to disable this part of the test for MacOS. The bug has
been raised here:
https://gitlab.com/qemu-project/qemu/-/issues/1495
Once that is fixed we should re-enable the test.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230228190653.1602033-2-alex.bennee@linaro.org>
Specifically add listing, injection of event channels.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
- Various header cleaned up (removing pointless headers)
- Mark various files/code user/system specific
- Make various objects target-independent
- Remove tswapN() calls from dump.o
- Suggest g_assert_not_reached() instead of assert(0)
- qdev / qom
- Replace various container_of() by QOM cast macros
- Declare some QOM macros using OBJECT_DECLARE_TYPE()
- Embed OHCI QOM child in SM501 chipset
- hw (ISA & IDE)
- add some documentation, improve function names
- un-inline, open-code few functions
- have ISA API accessing IRQ/DMA prefer ISABus over ISADevice
- Demote IDE subsystem maintenance to "Odd Fixes"
- ui: Improve Ctrl+Alt hint on Darwin Cocoa
-----BEGIN PGP SIGNATURE-----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=AV/+
-----END PGP SIGNATURE-----
Merge tag 'buildsys-qom-qdev-ui-20230227' of https://github.com/philmd/qemu into staging
- buildsys
- Various header cleaned up (removing pointless headers)
- Mark various files/code user/system specific
- Make various objects target-independent
- Remove tswapN() calls from dump.o
- Suggest g_assert_not_reached() instead of assert(0)
- qdev / qom
- Replace various container_of() by QOM cast macros
- Declare some QOM macros using OBJECT_DECLARE_TYPE()
- Embed OHCI QOM child in SM501 chipset
- hw (ISA & IDE)
- add some documentation, improve function names
- un-inline, open-code few functions
- have ISA API accessing IRQ/DMA prefer ISABus over ISADevice
- Demote IDE subsystem maintenance to "Odd Fixes"
- ui: Improve Ctrl+Alt hint on Darwin Cocoa
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmP9IeAACgkQ4+MsLN6t
# wN7bdQ//SxJYJuQvqTT6s+O0LmP6NbqvhxCXX7YAwK2jCTM+zTgcqqRZCcisLQol
# 3ENu2UhnZmiLKHSOxatOVozbws08/u8Vl+WkW4UTMUb1yo5KPaPtq808Y95RdAJB
# 7D7B5juDGnFRAHXZz38zVk9uIuEkm+Po/pD0JQa+upBtAAgOJTqGavDNSR5+T0Yl
# VjGdwK0b10skPqiF6OABYoy/4IFHVJJFIbARZh+a7hrF0llsbzUts5JiYsOxEEHQ
# t3woUItdMnS1m0+Ty4AQ8m0Yv9y4HZOIzixvsZ+vChj5ariwUhL9/7wC/s/UCYEg
# gKVA5X8R6n/ME6DScK99a+CyR/MXkz70b/rOUZxoutXhV3xdh4X1stL4WN9W/m3z
# D4i4ZrUsDUcKCGWlj49of/dKbOPwk1+e/mT0oDZD6JzG0ODjfdVxvJ/JEV2iHgS3
# WqHuSKzX/20H9j7/MgfbQ0HjBFOQ8tl781vQzhD+y+cF/IiTsHhrE6esIWho4bob
# kfSdVydUWWRnBsnyGoRZXoEMX9tn+pu0nKxEDm2Bo2+jajsa0aZZPokgjxaz4MnD
# Hx+/p1E+8IuOn05JgzQSgTJmKFdSbya203tXIsTo1kL2aJTJ6QfMvgEPP/fkn+lS
# oQyVBFZmb1JDdTM1MxOncnlWLg74rp/CWEc+u5pSdbxMO/M/uac=
# =AV/+
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 27 Feb 2023 21:34:24 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'buildsys-qom-qdev-ui-20230227' of https://github.com/philmd/qemu: (125 commits)
ui/cocoa: user friendly characters for release mouse
dump: Add create_win_dump() stub for non-x86 targets
dump: Simplify compiling win_dump.o by introducing win_dump_available()
dump: Clean included headers
dump: Replace TARGET_PAGE_SIZE -> qemu_target_page_size()
dump: Replace tswapN() -> cpu_to_dumpN()
hw/ide/pci: Add PCIIDEState::isa_irq[]
hw/ide/via: Replace magic 2 value by ARRAY_SIZE / MAX_IDE_DEVS
hw/ide/piix: Refactor pci_piix_init_ports as pci_piix_init_bus per bus
hw/ide/piix: Pass Error* to pci_piix_init_ports() for better error msg
hw/ide/piix: Remove unused includes
hw/ide/pci: Unexport bmdma_active_if()
hw/ide/ioport: Remove unnecessary includes
hw/ide: Declare ide_get_[geometry/bios_chs_trans] in 'hw/ide/internal.h'
hw/ide: Rename idebus_active_if() -> ide_bus_active_if()
hw/ide: Rename ide_init2() -> ide_bus_init_output_irq()
hw/ide: Rename ide_exec_cmd() -> ide_bus_exec_cmd()
hw/ide: Rename ide_register_restart_cb -> ide_bus_register_restart_cb
hw/ide: Rename ide_create_drive() -> ide_bus_create_drive()
hw/ide: Rename ide_set_irq() -> ide_bus_set_irq()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ICH9 is a south bridge which doesn't necessarily depend on x86, so move
it into the southbridge folder, analoguous to PIIX.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-13-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
