Header guard symbols should match their file name to make guard
collisions less likely. Offenders found with
scripts/clean-header-guards.pl -vn.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Sector-based limits are awkward to think about; in our on-going
quest to move to byte-based interfaces, convert max_transfer_length
and opt_transfer_length. Rename them (dropping the _length suffix)
so that the compiler will help us catch the change in semantics
across any rebased code, and improve the documentation. Use unsigned
values, so that we don't have to worry about negative values and
so that bit-twiddling is easier; however, we are still constrained
by 2^31 of signed int in most APIs.
When a value comes from an external source (iscsi and raw-posix),
sanitize the results to ensure that opt_transfer is a power of 2.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Skip bus_master_enable region creation on PCI device init
in order to be sure the IOMMU device (if present) would
be created in advance. Add this memory region at machine_done time.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
g_source_attach can return any value between 1 and UINT_MAX if you let
QEMU run long enough. However, qemu_chr_fe_add_watch can also return
a negative errno value when the device is disconnected or does not
support chr_add_watch. Change it to return zero to avoid overloading
these values.
Fix the cadence_uart which asserts in this case (easily obtained with
"-serial pty").
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Beginning of reconnect support for vhost-user.
Misc cleanups and fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXY0Q3AAoJECgfDbjSjVRpkVcH/2gTHRE9yUoWe6ROvPV67BKx
8Iy9GzJ3BMO3RolVZEA5KXIevn5TG+pV274BZEuXMD3AL/molv279p0o/gvBYoqq
V0jNH2MO+MV6D9OzhUXcgWSejvybF5W07ojPDU/hlgtFXPZFbJDyt95MWaLiilOg
cCtTuRqgrrRaypcnnk/CIDbC+Ek2kAYdgQHQbfj9ihle3TWO8R0bSXnFqSaqCIkM
4slMlv8y82fODeiO83nkpfAP1NCnfnRC8r8Gv7hbEUTlZQntavx5DuYdiIx6nsJE
W0g+Gpe1o0+jRuMnucGIUZvqzZ0e/I0wZuV16Nsfx+Rbd5+4CzTxZda5Qb05v7I=
=BHbJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio: new features, cleanups, fixes
Beginning of reconnect support for vhost-user.
Misc cleanups and fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 17 Jun 2016 01:28:39 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
MAINTAINERS: add Marcel to PCI
msi_init: change return value to 0 on success
fix some coding style problems
pci core: assert ENOSPC when add capability
test: start vhost-user reconnect test
tests: append i386 tests
vhost-net: save & restore vring enable state
vhost-net: save & restore vhost-user acked features
vhost-net: do not crash if backend is not present
vhost-user: disconnect on start failure
qemu-char: add qemu_chr_disconnect to close a fd accepted by listen fd
tests/vhost-user-bridge: workaround stale vring base
tests/vhost-user-bridge: add client mode
vhost-user: add ability to know vhost-user backend disconnection
pci: fix pci_requester_id()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
tests/Makefile.include
The patch introduces qemu_chr_disconnect(). The function is used for
closing a fd accepted by listen fd. Though we already have qemu_chr_delete(),
but it closes not only accepted fd but also listen fd. This new function
is used when we still want to keep listen fd.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h. Include it in
sysemu/os-posix.h and remove it from everywhere else.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This wrapper for machine_usb(current_machine) is not necessary,
replace all usages of usb_enabled() with machine_usb().
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-arm@nongnu.org
Cc: qemu-ppc@nongnu.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1465419025-21519-3-git-send-email-ehabkost@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove glib.h includes, as it is provided by osdep.h.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Introduce kvm_get_max_memslots() API that can be used to obtain the
maximum number of memslots supported by KVM.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
since there is no user of qemu_char_get_next_serial any more,
it's time to let it go away.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-7-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In order to deal well with the kvm vcpus (which can not be removed without any
protection), we do not close KVM vcpu fd, just record and mark it as stopped
into a list, so that we can reuse it for the appending cpu hot-add request if
possible. It is also the approach that kvm guys suggested:
https://www.mail-archive.com/kvm@vger.kernel.org/msg102839.html
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
[- Explicit CPU_REMOVE() from qemu_kvm/tcg_destroy_vcpu()
isn't needed as it is done from cpu_exec_exit()
- Use iothread mutex instead of global mutex during
destroy
- Don't cleanup vCPU object from vCPU thread context
but leave it to the callers (device_add/device_del)]
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The KVM API restricts vcpu ids to be < KVM_CAP_MAX_VCPUS. On PowerPC
targets, depending on the number of threads per core in the host and
in the guest, some topologies do generate higher vcpu ids actually.
When this happens, QEMU bails out with the following error:
kvm_init_vcpu failed: Invalid argument
The KVM_CREATE_VCPU ioctl has several EINVAL return paths, so it is
not possible to fully disambiguate.
This patch adds a check in the code that computes vcpu ids, so that
we can detect the error earlier, and print a friendlier message instead
of calling KVM_CREATE_VCPU with an obviously bogus vcpu id.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is a big refactoring of the migration backend code - moving away from
QEMUFile to the new QIOChannel framework introduced here. This brings a
good level of abstraction and reduction of many lines of code.
This series also adds the ability for many backends (all except RDMA) to
use TLS for encrypting the migration data between the endpoints.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJXRpKMAAoJEOsLTfxlfvZw2FMQAJmrp8ijvJNtdBa51bNY+xVx
zvrHDpWco/HxxqyBIGxG7g8Iq+wpNsdgoRxoQkfgIz9RkZiNrzb1kGRiqNFFBKFX
ziK1QQQ12ETUXwQ6VguBuwLDvCCenyUti0HfKkceG+Zu5263fyp+VzL+PuEtteT3
M0pZRrifj/TQqCBXR8yhBAo2dCiFETLVoruE+iNg2ipI3JDizxy8bdOU2gfnTayf
na7lE53pI+Wy8KE+qrhtsEgjHFp48uJ0HwQIIumvVndXFpIhRzCcN/aeVCjNYRjo
GeI18OJxcimRDwsnfuOwuZKhRcjWfa8WEIKsi8LdRTZFpFL6y9R57XNTBIFfbjOF
0lkmFTqJTBi3OTPjj0hMjpjOfXhyKUnwdqCAYlAxeuWHhqPDDhtEcnNtGdmQzx4Z
KvYzc3t31o1gPin024UUfA528PNREszaXhTM90/Dj0dhVSMoG1VQsQjxzkPXxdM1
wemfic+77Bk4oUrSplhdvvk4nySDWeseEjfdyVU2ixqldy8Ib1+6H+PCjWNotpQ0
YiDOHBy3rrUh6NhIqb0C2PWvd/9Aqs0nHQHJ8QKYK574MDbVo8mKTACFdoSYoZ1u
wuif7NL6qkyS55szf0dm8zPBCJ5nIR5SQE98E7+ptXNa8AipfFsTkZrr3aOjcdey
98AWF9KaZOWRfwgIm3Ft
=AYEK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amit-migration/tags/migration-2.7-2' into staging
migration: add TLS support to the migration data channel
This is a big refactoring of the migration backend code - moving away from
QEMUFile to the new QIOChannel framework introduced here. This brings a
good level of abstraction and reduction of many lines of code.
This series also adds the ability for many backends (all except RDMA) to
use TLS for encrypting the migration data between the endpoints.
# gpg: Signature made Thu 26 May 2016 07:07:08 BST using RSA key ID 657EF670
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg: aka "Amit Shah <amit@kernel.org>"
# gpg: aka "Amit Shah <amitshah@gmx.net>"
* remotes/amit-migration/tags/migration-2.7-2: (28 commits)
migration: remove qemu_get_fd method from QEMUFile
migration: remove support for non-iovec based write handlers
migration: add support for encrypting data with TLS
migration: define 'tls-creds' and 'tls-hostname' migration parameters
migration: don't use an array for storing migrate parameters
migration: move definition of struct QEMUFile back into qemu-file.c
migration: delete QEMUFile stdio implementation
migration: delete QEMUFile sockets implementation
migration: delete QEMUSizedBuffer struct
migration: delete QEMUFile buffer implementation
migration: convert savevm to use QIOChannel for writing to files
migration: convert RDMA to use QIOChannel interface
migration: convert exec socket protocol to use QIOChannel
migration: convert fd socket protocol to use QIOChannel
migration: convert tcp socket protocol to use QIOChannel
migration: rename unix.c to socket.c
migration: convert unix socket protocol to use QIOChannel
migration: convert post-copy to use QIOChannelBuffer
migration: add reporting of errors for outgoing migration
migration: add helpers for creating QEMUFile from a QIOChannel
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The post-copy code does some I/O to/from an intermediate
in-memory buffer rather than direct to the underlying
I/O channel. Switch this code to use QIOChannelBuffer
instead of QEMUSizedBuffer.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-12-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Also add trace points now that the function can be directly called.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Commit 983a1600 changed the semantics of blk_write_zeroes() to
be byte-based rather than sector-based, but did not change the
name, which is an open invitation for other code to misuse the
function. Renaming to pwrite_zeroes() makes it more in line
with other byte-based interfaces, and will help make it easier
to track which remaining write_zeroes interfaces still need
conversion.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Callers of dma_blk_io have no way to pass extra data to the DMAIOFunc,
because the original callback and opaque are gone by the time DMAIOFunc
is called. On the other hand, the BlockBackend is usually derived
from those extra data that you could pass to the DMAIOFunc (in the
next patch, that would be the SCSIRequest).
So change DMAIOFunc's prototype, decoupling it from blk_aio_readv
and blk_aio_writev's. The new prototype loses the BlockBackend
and gains an extra opaque value which, in the case of dma_blk_readv
and dma_blk_writev, is of course used for the BlockBackend.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blk_new() cannot fail so its Error ** parameter has become superfluous.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Its only caller is blk_new_open(), so we can just inline it there.
The bdrv_new_root() call is dropped in the process because we can just
let bdrv_open() create the BDS.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Rh0Q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
X86 queue, 2016-05-23
# gpg: Signature made Mon 23 May 2016 23:48:27 BST using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
* remotes/ehabkost/tags/x86-pull-request:
target-i386: kvm: Eliminate kvm_msr_entry_set()
target-i386: kvm: Simplify MSR setting functions
target-i386: kvm: Simplify MSR array construction
target-i386: kvm: Increase MSR_BUF_SIZE
target-i386: kvm: Allocate kvm_msrs struct once per VCPU
target-i386: Call cpu_exec_init() on realize
target-i386: Move TCG initialization to realize time
target-i386: Move TCG initialization check to tcg_x86_init()
cpu: Eliminate cpudef_init(), cpudef_setup()
target-i386: Set constant model_id for qemu64/qemu32/athlon
pc: Set CPU model-id on compat_props for pc <= 2.4
osdep: Move default qemu_hw_version() value to a macro
target-i386: kvm: Use X86XSaveArea struct for xsave save/load
target-i386: Use xsave structs for ext_save_area
target-i386: Define structs for layout of xsave area
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
x86_cpudef_init() doesn't do anything anymore, cpudef_init(),
cpudef_setup(), and x86_cpudef_init() can be finally removed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Usually, Random Number Generator is abbreviated to RNG/rng.
so replacing RndRandom with RngRandom seems more reasonable
and keep consistent with RngBackend.
Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <1460684168-5403-1-git-send-email-weijg.fnst@cn.fujitsu.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
All DisplayType values are just UI options that don't affect any
hardware emulation code, except for DT_NOGRAPHIC. Replace
DT_NOGRAPHIC with DT_NONE plus a new "-machine graphics=on|off"
option, so hardware emulation code don't need to use the
display_type variable.
Cc: Michael Walle <michael@walle.cc>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of reusing DT_SDL for Cocoa, use DT_COCOA to indicate
that a Cocoa display was requested.
configure already ensures CONFIG_COCOA and CONFIG_SDL are never
set at the same time. The only case where DT_SDL is used outside
a #ifdef CONFIG_SDL block is in the no_frame/alt_grab/ctrl_grab
check. That means the only user-visible change is that we will
start printing a warning if the SDL-specific options are used in
Cocoa mode. This is a bugfix, because no_frame/alt_grab/ctrl_grab
are not used by Cocoa code.
Cc: Andreas Färber <andreas.faerber@web.de>
Cc: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of implementing separate check functions for each vga
interface type, add a table enumerating the possible VGA
interfaces.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We need to introduce a separate BdrvNextIterator struct that can keep
more state than just the current BDS in order to avoid using the bs->blk
pointer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
In many cases we just want to know whether a BDS has at least one BB
attached, without needing to know the exact BB that is attached. In
contrast to bs->blk, this is still a valid question when more than one
BB can be attached, so just answer it by checking the parents list.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Since virtio-blk implements request merging itself these days, the only
remaining users are test cases for the function. That doesn't make the
function exactly useful any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch changes where the throttling state is stored (used to be the
BlockDriverState, now it is the BlockBackend), but it doesn't actually
make it a BB level feature yet. For example, throttling is still
disabled when the BDS is detached from the BB.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
As a first step towards moving I/O throttling to the BlockBackend level,
this patch changes all pointers in struct ThrottleGroup from referencing
a BlockDriverState to referencing a BlockBackend.
This change is valid because we made sure that throttling can only be
enabled on BDSes which have a BB attached.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Some features, like I/O throttling, are implemented outside
block-backend.c, but still want to keep information in BlockBackend,
e.g. list entries that allow keeping a list of BlockBackends.
In order to avoid exposing the whole struct layout in the public header
file, this patch introduces an embedded public struct where such
information can be added and a pair of functions to convert between
BlockBackend and BlockBackendPublic.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Memory barriers are needed also by Xen and, when the ioeventfd
bugs are fixed, by TCG as well.
sysemu/kvm.h is not anymore needed in sysemu/dma.h, move it to
the actual users.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return the negated value of accel_initialised is meaningless,
and the caller vl doesn't check it.
Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Now that there are no remaining clients, we can drop the
sector-based blk_read(), blk_write(), blk_aio_readv(), and
blk_aio_writev(). Sadly, there are still remaining
sector-based interfaces, such as blk_*discard(), or
blk_write_compressed(); those will have to wait for another
day.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Sector-based blk_aio_readv() and blk_aio_writev() should die; switch
to byte-based blk_aio_preadv() and blk_aio_pwritev() instead.
The patch had to touch multiple files at once, because dma_blk_io()
takes pointers to the functions, and ide_issue_trim() piggybacks on
the same interface (while ignoring offset under the hood).
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blk_aio_readv() and blk_aio_writev() are annoying in that they
can't access sub-sector granularity, and cannot pass flags.
Also, they require the caller to pass redundant information
about the size of the I/O (qiov->size in bytes must match
nb_sectors in sectors).
Add new blk_aio_preadv() and blk_aio_pwritev() functions to fix
the flaws. The next few patches will upgrade callers, then
finally delete the old interfaces.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Sector-based blk_write() should die; convert the one-off
variant blk_write_zeroes() to use an offset/count interface
instead. Likewise for blk_co_write_zeroes() and
blk_aio_write_zeroes().
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Sector-based blk_read() should die; convert the one-off
variant blk_read_unthrottled().
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have several block drivers that understand BDRV_REQ_FUA,
and emulate it in the block layer for the rest by a full flush.
But without a way to actually request BDRV_REQ_FUA during a
pass-through blk_pwrite(), FUA-aware block drivers like NBD are
forced to repeat the emulation logic of a full flush regardless
of whether the backend they are writing to could do it more
efficiently.
This patch just wires up a flags argument; followup patches
will actually make use of it in the NBD driver and in qemu-io.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This can be used when probing whether KVM support specific device. Here,
a raw vmfd is used.
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1458788142-17509-4-git-send-email-peterx@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch introduces block driver that implement recording
and replaying of block devices' operations.
All block completion operations are added to the queue.
Queue is flushed at checkpoints and information about processed requests
is recorded to the log. In replay phase the queue is matched with
events read from the log. Therefore block devices requests are processed
deterministically.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
[ kwolf: Rebased onto modified and already applied part of the series ]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
ParallelIOArg is shared between just qemu-char.c and
hw/char/parallel.c, and as such has no business in qemu-common.h.
Move it to sysemu/char.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-common.h should only be included by .c files. Its file comment
explains why: "No header file should depend on qemu-common.h, as this
would easily lead to circular header dependencies."
qemu/iov.h includes qemu-common.h for QEMUIOVector stuff. Move all
that to qemu/iov.h and drop the ill-advised include. Include
qemu/iov.h where the QEMUIOVector stuff is now missing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Re-run scripts/clean-includes to apply the previous commit's
corrections and updates. Besides redundant qemu/typedefs.h, this only
finds a redundant config-host.h include in ui/egl-helpers.c. No idea
how that escaped the previous runs.
Some manual whitespace trimming around dropped includes squashed in.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This function iterates over all BDSs attached to a BB. We are going to
need it when rewriting bdrv_next() so it no longer uses bdrv_states.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We can basically inline it in hmp_drive_del(); monitor_remove_blk() is
called already, so we just need to call bdrv_make_anon(), too.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before this patch, blk_new() automatically assigned a name to the new
BlockBackend and considered it referenced by the monitor. This patch
removes the implicit monitor_add_blk() call from blk_new() (and
consequently the monitor_remove_blk() call from blk_delete(), too) and
thus blk_new() (and related functions) no longer take a BB name
argument.
In fact, there is only a single point where blk_new()/blk_new_open() is
called and the new BB is monitor-owned, and that is in blockdev_init().
Besides thus relieving us from having to invent names for all of the BBs
we use in qemu-img, this fixes a bug where qemu cannot create a new
image if there already is a monitor-owned BB named "image".
If a BB and its BDS tree are created in a single operation, as of this
patch the BDS tree will be created before the BB is given a name
(whereas it was the other way around before). This results in minor
change to the output of iotest 087, whose reference output is amended
accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce separate functions (monitor_add_blk() and
monitor_remove_blk()) which set or unset a BB name. Since the name is
equivalent to the monitor's reference to a BB, adding a name the same as
declaring the BB to be monitor-owned and removing it revokes this
status, hence the function names.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Later, we will remove bdrv_commit_all() and move its contents here, and
in order to replace bdrv_commit_all() calls by calls to blk_commit_all()
before doing so, we need to add it as an alias now.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu_clock_warp function is called to update virtual clock when CPU
is sleeping. This function includes replay checkpoint to make execution
deterministic in icount mode.
Record/replay module flushes async event queue at checkpoints.
Some of the events (e.g., block devices operations) include interaction
with hardware. E.g., APIC polled by block devices sets one of IRQ flags.
Flag to be set depends on currently executed thread (CPU or iothread).
Therefore in replay mode we have to process the checkpoints in the same thread
as they were recorded.
qemu_clock_warp function (and its checkpoint) may be called from different
thread. This patch decouples two different execution cases of this function:
call when CPU is sleeping from iothread and call from cpu thread to update
virtual clock.
First task is performed by qemu_start_warp_timer function. It sets warp
timer event to the moment of nearest pending virtual timer.
Second function (qemu_account_warp_timer) is called from cpu thread
before execution of the code. It advances virtual clock by adding the length
of period while CPU was sleeping.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20160310115609.4812.44986.stgit@PASHA-ISP>
[Update docs. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch implements record and replay of character devices.
It records chardevs communication in replay mode. Recorded information
include data read from backend and counter of bytes written
from frontend to backend to preserve frontend internal state.
If character device was configured through the command line in record mode,
then in replay mode it should be also added to command line. Backend of
the character device could be changed in replay mode.
Replaying of devices that perform ioctl and get_msgfd operations is not
supported.
gdbstub which also acts as a backend is not recorded to allow controlling
the replaying through gdb. Monitor backends are also not recorded.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20160314074436.4980.83856.stgit@PASHA-ISP>
[Add stubs. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We check that the guest can't write beyond the end of its disk, but for
other internal users it can make sense to allow growing a file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that QEMU wraps the Win32 sockets methods to automatically
set errno upon failure, there is no reason for callers to use
the socket_error() method. They can rely on accessing errno
even on Win32. Remove all use of socket_error() from general
code, leaving it as a static method in oslib-win32.c only.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The windows socket functions look identical to the normal POSIX
sockets functions, but instead of setting errno, the caller needs
to call WSAGetLastError(). QEMU has tried to deal with this
incompatibility by defining a socket_error() method that callers
must use that abstracts the difference between WSAGetLastError()
and errno.
This approach is somewhat error prone though - many callers of
the sockets functions are just using errno directly because it
is easy to forget the need use a QEMU specific wrapper. It is
not always immediately obvious that a particular function will
in fact call into Windows sockets functions, so the dev may not
even realize they need to use socket_error().
This introduces an alternative approach to portability inspired
by the way GNULIB fixes portability problems. We use a macro to
redefine the original socket function names to refer to a QEMU
wrapper function. The wrapper function calls the original Win32
sockets method and then sets errno from the WSAGetLastError()
value.
Thus all code can simply call the normal POSIX sockets APIs are
have standard errno reporting on error, even on Windows. This
makes the socket_error() method obsolete.
We also bring closesocket & ioctlsocket into this approach. Even
though they are non-standard Win32 names, we can't wrap the normal
close/ioctl methods since there's no reliable way to distinguish
between a file descriptor and HANDLE in Win32.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Historically QEMU has had a socket_error() macro that was
defined to map to WSASocketError(). The os-win32.h header
file would define errno constants that mapped to the
WSA error constants. This worked fine with Mingw32 since
its header files never defined any errno values, nor did
it even provide an errno.h. So callers of socket_error()
could match on traditional Exxxx constants and it would
all "just work".
With Mingw64 though, things work rather differently. First
there is an errno.h file which defines all the traditional
errno constants you'd expect from a UNIX platform. There
is then a winerror.h which defined the WSA error constants.
Crucially the WSAExxxx errno values in winerror.h do not
match the Exxxx errno values in error.h.
If QEMU had only imported winerror.h it would still work,
but the qemu/osdep.h file unconditionally imports errno.h.
So callers of socket_error() will get now WSAExxxx values
back and compare them to the Exxx constants. This will
always fail silently at runtime.
To solve this QEMU needs to stop assuming the WSAExxxx
constant values match the Exxx constant values. Thus the
socket_error() macro is turned into a small function that
re-maps WSAExxxx values into Exxx.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
QSIMPLEQ supports appending to tail in O(1) and is intrusive so
it doesn't require extra memory allocations for the bookkeeping
data.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1457010971-24771-1-git-send-email-lprosek@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Requests are now created in the RngBackend parent class and the
code path is shared by both rng-egd and rng-random.
This commit fixes the rng-random implementation which processed
only one request at a time and simply discarded all but the most
recent one. In the guest this manifested as delayed completion
of reads from virtio-rng, i.e. a read was completed only after
another read was issued.
By switching rng-random to use the same request queue as rng-egd,
the unsafe stack-based allocation of the entropy buffer is
eliminated and replaced with g_malloc.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1456994238-9585-5-git-send-email-lprosek@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
RngBackend is now in charge of cleaning up the linked list on
instance finalization. It also exposes a function to finalize
individual RngRequest instances, called by its child classes.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1456994238-9585-4-git-send-email-lprosek@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The 'requests' field now lives in the RngBackend parent class.
There are no functional changes in this commit.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1456994238-9585-3-git-send-email-lprosek@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
rng_backend_cancel_requests had no callers and none of the code
deleted in this commit ever ran.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1456994238-9585-2-git-send-email-lprosek@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Commit d0d7708b forgot to parse logging for spice chardevs and
virtual consoles. This requires making qemu_chr_parse_common()
non-static. While at it, use a temporary variable to make the
code shorter, as well as reduce the churn when a later patch
alters the layout of simple unions.
Signed-off-by: Eric Blake <eblake@redhat.com>
CC: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455927587-28033-2-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
NB: If this commit breaks compilation for your out-of-tree
patchseries or fork, then you need to make sure you add
#include "qemu/osdep.h" to any new .c files that you have.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Here, total_size is the size in bytes to be dumped (raw data, which
means before compression), while written_size are bytes handled (raw
size too).
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1455772616-8668-9-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If "detach" is provided, one thread is created to do the dump work,
while main thread will return immediately. For each GuestPhysBlock,
adding one more field "mr" to points to MemoryRegion that it
belongs, also ref the mr before use.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1455772616-8668-8-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of malloc/free each time for DumpState, make it
static. Added DumpStatus to show status for dump.
This is to be used for detached dump.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1455772616-8668-4-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch aligns the prototype with qemu_fdt_getprop. The caller
can choose whether the function self-asserts on error (passing
&error_fatal as Error ** argument, corresponding to the legacy behavior),
or behaves differently such as simply output a message.
In this later case the caller can use the new lenp parameter to interpret
the error if any.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Current qemu_fdt_getprop exits if the property is not found. It is
sometimes needed to read an optional property, in which case we do
not wish to exit but simply returns a null value.
This patch converts qemu_fdt_getprop to accept an Error **, and existing
users are converted to pass &error_fatal. This preserves the existing
behaviour. Then to use the API with your optional semantic a null
parameter can be conveyed.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This new helper routine returns a NULL terminated array of
node paths matching a node name and a compat string.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This function returns the host device tree blob from sysfs
(/proc/device-tree). It uses a recursive function inspired
from dtc read_fstree.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Recent Fedora complains while compiling ui/sdl.c:
/usr/x86_64-w64-mingw32/sys-root/mingw/include/winsock2.h:15:2: warning: #warning Please include winsock2.h before windows.h [-Wcpp]
And with this patch we dutifully obey.
Stefan Weil:
Without that patch, windows.h will include winsock.h
(which conflicts with winsock2.h) when compiling sdl.c.
Normally we define WIN32_LEAN_AND_MEAN, and
windows.h won't include winsock.h.
include/ui/sdl2.h and ui/sdl.c undefine that macro,
so the order of the include files is important.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When bdrv_close_all() is called, instead of force-closing all root
BlockDriverStates, it is better to just drop the reference from all
BlockBackends and let them be closed automatically. This prevents BDS
from getting closed that are still referenced by other BDS, which may
result in loss of cached data.
This patch adds a function for doing that, but does not yet incorporate
it in bdrv_close_all().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is unused now, so we can remove it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_close() no longer signifies ejection of a medium, this is now done
by removing the BDS from the BB. Therefore, we want to have a notifier
for that in the BB instead of a close notifier in the BDS. The former is
added now, the latter is removed later.
Symmetrically, another notifier list is added that is invoked whenever a
BDS is inserted. We will need that for virtio-blk and virtio-scsi, which
can then remove their op blockers on BDS ejection and set them up on
insertion.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Broken since d0d7708ba2, since the backend is NULL.
And now no longer needed by ivshmem.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Add get_watchdog_action(void) to allow access to the configured action.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Typically a UNIX guest OS will log boot messages to a serial
port in addition to any graphical console. An admin user
may also wish to use the serial port for an interactive
console. A virtualization management system may wish to
collect system boot messages by logging the serial port,
but also wish to allow admins interactive access.
Currently providing such a feature forces the mgmt app
to either provide 2 separate serial ports, one for
logging boot messages and one for interactive console
login, or to proxy all output via a separate service
that can multiplex the two needs onto one serial port.
While both are valid approaches, they each have their
own downsides. The former causes confusion and extra
setup work for VM admins creating disk images. The latter
places an extra burden to re-implement much of the QEMU
chardev backends logic in libvirt or even higher level
mgmt apps and adds extra hops in the data transfer path.
A simpler approach that is satisfactory for many use
cases is to allow the QEMU chardev backends to have a
"logfile" property associated with them.
$QEMU -chardev socket,host=localhost,port=9000,\
server=on,nowait,id-charserial0,\
logfile=/var/log/libvirt/qemu/test-serial0.log
-device isa-serial,chardev=charserial0,id=serial0
This patch introduces a 'ChardevCommon' struct which
is setup as a base for all the ChardevBackend types.
Ideally this would be registered directly as a base
against ChardevBackend, rather than each type, but
the QAPI generator doesn't allow that since the
ChardevBackend is a non-discriminated union. The
ChardevCommon struct provides the optional 'logfile'
parameter, as well as 'logappend' which controls
whether QEMU truncates or appends (default truncate).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1452516281-27519-1-git-send-email-berrange@redhat.com>
[Call qemu_chr_parse_common if cd->parse is NULL. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The amount of memory allocated in nbd_co_receive_request is driven by the
NBD client (possibly a virtual machine). Parallel I/O can cause the
server to allocate a large amount of memory; check for failures and
return ENOMEM in that case.
Cc: qemu-block@nongnu.org
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
crash assumes the physical base in the kdump subheader of
makedumpfile formatted dumps is correct. Zero is not correct
for all architectures, so allow it to be changed.
(No functional change.)
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452542185-10914-5-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is necessary for targets that don't have TARGET_PAGE_SIZE ==
real-target-page-size. The target should set the page size to the
correct one, if known, or, if not known, to the maximum page size
it supports.
(No functional change.)
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452542185-10914-4-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds support for split IRQ chip mode. When
KVM_CAP_SPLIT_IRQCHIP is enabled:
1.) The PIC, PIT, and IOAPIC are implemented in userspace while
the LAPIC is implemented by KVM.
2.) The software IOAPIC delivers interrupts to the KVM LAPIC via
kvm_set_irq. Interrupt delivery is configured via the MSI routing
table, for which routes are reserved in target-i386/kvm.c then
configured in hw/intc/ioapic.c
3.) KVM delivers IOAPIC EOIs via a new exit KVM_EXIT_IOAPIC_EOI,
which is handled in target-i386/kvm.c and relayed to the software
IOAPIC via ioapic_eoi_broadcast.
Signed-off-by: Matt Gingell <gingell@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds the initial plumbing for split IRQ chip mode via
KVM_CAP_SPLIT_IRQCHIP. In addition to option processing, a number of
kvm_*_in_kernel macros are defined to help clarify which component is
where.
Signed-off-by: Matt Gingell <gingell@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
getpagesize on Linux returns an int. Fix QEMU's implementation for
Windows to return an int (instead of size_t), too.
This fixes a compiler warning which was introduced recently
(commit 093e3c42).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Where we have iterable, but non-postcopiable devices (e.g. htab
or block migration), complete them before forming the 'package'
but with the CPUs stopped. This stops them filling up the package.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
This function returns the reference count of a given BlockBackend.
For convenience, it returns 0 if the BlockBackend pointer is NULL.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: dfdd8a17dbe3288842840636d2cfe5bb895abcb0.1446475331.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Introduce a new QMP command 'blockdev-change-medium' which is intended
to replace the 'change' command for block devices. The existing function
qmp_change_blockdev() is accordingly renamed to
qmp_blockdev_change_medium().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to open a BDS which inherits a BB's root state,
blk_get_open_flags_from_root_state() is used to inquire the flags to be
passed to bdrv_open(), and blk_apply_root_state() is used to apply the
remaining state after the BDS has been opened.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function removes the BlockDriverState associated with the given
BlockBackend from that BB and sets the BDS pointer in the BB to NULL.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Postcopy detects accesses to pages that haven't been transferred yet
using userfaultfd, and it causes exceptions on pages that are 'not
present'.
Ballooning also causes pages to be marked as 'not present' when the
guest inflates the balloon.
Potentially a balloon could be inflated to discard pages that are
currently inflight during postcopy and that may be arriving at about
the same time.
To avoid this confusion, disable ballooning during postcopy.
When disabled we drop balloon requests from the guest. Since ballooning
is generally initiated by the host, the management system should avoid
initiating any balloon instructions to the guest during migration,
although it's not possible to know how long it would take a guest to
process a request made prior to the start of migration.
Guest initiated ballooning will not know if it's really freed a page
of host memory or not.
Queueing the requests until after migration would be nice, but is
non-trivial, since the set of inflate/deflate requests have to
be compared with the state of the page to know what the final
outcome is allowed to be.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Userfault doesn't work with mlock; mlock is designed to nail down pages
so they don't move, userfault is designed to tell you when they're not
there.
munlock the pages we userfault protect before postcopy.
mlock everything again at the end if mlock is enabled.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
During the postcopy phase we must not call the iterate method on
precopy-only devices, since they may have done some cleanup during
the _complete call at the end of the precopy phase.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add qemu_savevm_state_complete_postcopy to complement
qemu_savevm_state_complete_precopy together with a new
save_live_complete_postcopy method on devices.
The save_live_complete_precopy method is called on
all devices during a precopy migration, and all non-postcopy
devices during a postcopy migration at the transition.
The save_live_complete_postcopy method is called at
the end of postcopy for all postcopiable devices.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Modify save_live_pending to return separate postcopiable and
non-postcopiable counts.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
MIG_CMD_PACKAGED is a migration command that wraps a chunk of migration
stream inside a package whose length can be determined purely by reading
its header. The destination guarantees that the whole MIG_CMD_PACKAGED
is read off the stream prior to parsing the contents.
This is used by postcopy to load device state (from the package)
while leaving the main stream free to receive memory pages.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The state of the postcopy process is managed via a series of messages;
* Add wrappers and handlers for sending/receiving these messages
* Add state variable that track the current state of postcopy
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add two src->dest commands:
* OPEN_RETURN_PATH - To request that the destination open the return path
* PING - Request an acknowledge from the destination
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Create QEMU_VM_COMMAND section type for sending commands from
source to destination. These commands are not intended to convey
guest state but to control the migration process.
For use in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In postcopy we're going to need to perform the complete phase
for postcopiable devices at a different point, start out by
renaming all of the 'complete's to make the difference obvious.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The migration code generally is built target-independent, however
there are a few places where knowing the target page size would
avoid artificially moving stuff into migration/ram.c.
Provide 'qemu_target_page_bits()' that returns TARGET_PAGE_BITS
to other bits of code so that they can stay target-independent.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJWPHM6AAoJEL/70l94x66DK5YIAJTNthYWL8eNhQ1iek6CLlV+
etVXm3JDmkV0zOfYVHLBb44VLZ6I1ocas+57F/kmz7SKpMLiI6bMXRxhTSkiO4D+
3N36cWQf3fq+P0DmxuikMlYGz8V6QQ5PQE2xJKV0ZIWAkiqInxilkN3qt81sNR+A
A9Ohom3sc0eGHyYJcVDK4krbnNSAZjIB2yMWperw61x+GYAhxjA02HPUgB32KK6q
KrdnKmnRu9Cw6y4wTCbbDITJztPexZYsX2DOJh30wC0eNcE+MZ7J2im8Frpxe+Ml
C8MUuvSqLOyeu9tUfrXGzd6kMtEKrmU+fh2nNbxJbtfowDjkW2jcIEgC0UjkGE4=
=BF1q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream-replay' into staging
So here it is, let's see what happens.
# gpg: Signature made Fri 06 Nov 2015 09:30:34 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream-replay:
replay: recording of the user input
replay: command line options
replay: replay blockers for devices
replay: initialization and deinitialization
replay: ptimer
bottom halves: introduce bh call function
replay: checkpoints
icount: improve counting for record/replay
replay: shutdown event
replay: recording and replaying clock ticks
replay: asynchronous events infrastructure
replay: interrupts and exceptions
cpu: replay instructions sequence
cpu-exec: allow temporary disabling icount
replay: introduce icount event
replay: introduce mutex to protect the replay log
replay: internal functions for replay log
replay: global variables and function stubs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This records user input (keyboard and mouse events) in record mode and replays
these input events in replay mode.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162524.8676.11696.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Some devices are not supported by record/replay subsystem.
This patch introduces replay blocker which denies starting record/replay
if such devices are included into the configuration.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162512.8676.11367.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This patch introduces the functions for enabling the record/replay and for
freeing the resources when simulator closes.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162507.8676.90232.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This patch adds deterministic replay for hardware periodic countdown timers.
ptimer uses bottom halves layer to execute such an asynchronous callback.
We put this callback into the replay queue instead of bottom halves one.
When checkpoint is met by main loop thread, the replay queue is processed
and callback is executed. Binding callback moment to one of the checkpoints
makes it deterministic.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162456.8676.83366.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This patch introduces checkpoints that synchronize cpu thread and iothread.
When checkpoint is met in the code all asynchronous events from the queue
are executed.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162444.8676.52916.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This patch records and replays simulator shutdown event.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162433.8676.32262.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Clock ticks are considered as the sources of non-deterministic data for
virtual machine. This patch implements saving the clock values when they
are acquired (virtual, host clock).
When replaying the execution corresponding values are read from log and
transfered to the module, which wants to read the values.
Such a design required the clock polling to be synchronized. Sometimes
it is not true - e.g. when timeouts for timer lists are checked. In this case
we use a cached value of the clock, passing it to the client code.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162427.8676.36558.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This patch adds module for saving and replaying asynchronous events.
These events include network packets, keyboard and mouse input,
USB packets, thread pool and bottom halves callbacks.
All events are stored in the queue to be processed at synchronization points
such as beginning of TB execution, or checkpoint in the iothread.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162422.8676.88696.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This patch includes modifications of common cpu files. All interrupts and
exceptions occured during recording are written into the replay log.
These events allow correct replaying the execution by kicking cpu thread
when one of these events is found in the log.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162416.8676.57647.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds calls to replay functions into the icount setup block.
In record mode number of executed instructions is written to the log.
In replay mode number of istructions to execute is taken from the replay log.
When replayed instructions counter is expired qemu_notify_event()
function is called to wake up the iothread.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162405.8676.31890.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds icount event to the replay subsystem. This event corresponds
to execution of several instructions and used to synchronize input events
in the replay phase.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162354.8676.31351.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds global variables, defines, function declarations,
and function stubs for deterministic VM replay used by external modules.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162337.8676.41538.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit de9d61e83d.
Now 'cpu_clean_all_dirty' is useless, we can revert the related code.
Conflicts:
include/sysemu/kvm.h
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1446695464-27116-3-git-send-email-liang.z.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function qemu_savevm_state_cancel is called after the migration
in migration_thread, it seems strange to 'cancel' it after completion,
rename it to qemu_savevm_state_cleanup looks better.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VOcb
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/ivshmem-pull-request' into staging
ivshmem series
# gpg: Signature made Mon 26 Oct 2015 09:27:46 GMT using RSA key ID 75969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/ivshmem-pull-request: (51 commits)
doc: document ivshmem & hugepages
ivshmem: use little-endian int64_t for the protocol
ivshmem: use kvm irqfd for msi notifications
ivshmem: rename MSI eventfd_table
ivshmem: remove EventfdEntry.vector
ivshmem: add hostmem backend
ivshmem: use qemu_strtosz()
ivshmem: do not keep shm_fd open
tests: add ivshmem qtest
qtest: add qtest_add_abrt_handler()
msix: implement pba write (but read-only)
contrib: remove unnecessary strdup()
ivshmem: add check on protocol version in QEMU
docs: update ivshmem device spec
ivshmem-server: fix hugetlbfs support
ivshmem-server: use a uint16 for client ID
ivshmem-client: check the number of vectors
contrib: add ivshmem client and server
util: const event_notifier_get_fd() argument
ivshmem: reset mask on device reset
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If a chardev is allowed to be created outside of QMP, then it must be
also possible to free it. This is useful for ivshmem that creates
chardev anonymously and must be able to free them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
This function associates the given BlockDriverState with the given
BlockBackend.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This structure will store some of the state of the root BDS if the BDS
tree is removed, so that state can be restored once a new BDS tree is
inserted.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These options are only relevant for the user of a whole BDS tree (like a
guest device or a block job) and should thus be moved into the
BlockBackend.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blk_is_available() returns true iff the BDS is inserted (which means
blk_bs() is not NULL and bdrv_is_inserted() returns true) and if the
tray of the guest device is closed.
blk_is_inserted() is changed to return true only if blk_bs() is not
NULL.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make bdrv_is_inserted(), blk_is_inserted(), and the callback
BlockDriver.bdrv_is_inserted() return a bool.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The functions for checking xcrs, xsave and pit_state2 are
only used on x86, so they should reside in target-i386/kvm.c.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1444933820-6968-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In-kernel ITS emulation on ARM64 will require to supply requester IDs.
These IDs can now be retrieved from the device pointer using new
pci_requester_id() function.
This patch adds pci_dev pointer to KVM GSI routing functions and makes
callers passing it.
x86 architecture does not use requester IDs, but hw/i386/kvm/pci-assign.c
also made passing PCI device pointer instead of NULL for consistency with
the rest of the code.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-Id: <ce081423ba2394a4efc30f30708fca07656bc500.1444916432.git.p.fedin@samsung.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This capability is useful to determine whether we can use KVM ITS
emulation on ARM
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-Id: <ff4ccb09b837d37defd639b885526949a25276de.1444916432.git.p.fedin@samsung.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Having creation as a member of the CharDriver struct removes the need
to export functions for qemu-char.c's usage. After the conversion,
chardev backends implemented outside qemu-char.c will not need a stub
creation function anymore.
Ultimately all drivers will be converted. For now, support the case
where cd->create == NULL.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The header is included from basically everywhere, thanks to cpu.h.
It should be moved to the (TCG only) files that actually need it.
As a start, remove non-TCG stuff.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The oslib-win32 file currently provides a localtime_r and
gmtime_r replacement unconditionally. Some versions of
Mingw-w64 would provide crude macros for localtime_r/gmtime_r
which QEMU takes care to disable. Latest versions of Mingw-w64
now provide actual functions for localtime_r/gmtime_r, but
with a twist that you have to include unistd.h or pthread.h
before including time.h. By luck some files in QEMU have
such an include order, resulting in compile errors:
CC util/osdep.o
In file included from include/qemu-common.h:48:0,
from util/osdep.c:48:
include/sysemu/os-win32.h:77:12: error: redundant redeclaration of 'gmtime_r' [-Werror=redundant-decls]
struct tm *gmtime_r(const time_t *timep, struct tm *result);
^
In file included from include/qemu-common.h:35:0,
from util/osdep.c:48:
/usr/i686-w64-mingw32/sys-root/mingw/include/time.h:272:107: note: previous definition of 'gmtime_r' was here
In file included from include/qemu-common.h:48:0,
from util/osdep.c:48:
include/sysemu/os-win32.h:79:12: error: redundant redeclaration of 'localtime_r' [-Werror=redundant-decls]
struct tm *localtime_r(const time_t *timep, struct tm *result);
^
In file included from include/qemu-common.h:35:0,
from util/osdep.c:48:
/usr/i686-w64-mingw32/sys-root/mingw/include/time.h:269:107: note: previous definition of 'localtime_r' was here
This change adds a configure test to see if localtime_r
exits, and only enables the QEMU impl if missing. We also
re-arrange qemu-common.h try attempt to guarantee that all
source files get unistd.h before time.h and thus see the
localtime_r/gmtime_r defs.
[sw: Use "official" spellings for Mingw-w64, MinGW in comments.]
[sw: Terminate sentences with a dot in comments.]
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Some functions previously used only by vGICv2 are useful also for vGICv3
implementation. Untie them from GICState and make accessible from within
other modules:
- kvm_arm_gic_set_irq()
- kvm_gic_supports_attr() - moved to common code and renamed to
kvm_device_check_attr()
- kvm_gic_access() - turned into GIC-independent kvm_device_access().
Data pointer changed to void * because some GICv3 registers are
64-bit wide
Some of these changes are not used right now, but they will be helpful for
implementing live migration.
Actually kvm_dist_get() and kvm_dist_put() could also be made reusable, but
they would require two extra parameters (s->dev_fd and s->num_cpu) as well as
lots of typecasts of 's' to DeviceState * and back to GICState *. This makes
the code very ugly so i decided to stop at this point. I tried also an
approach with making a base class for all possible GICs, but it would contain
only three variables (dev_fd, cpu_num and irq_num), and accessing them through
the rest of the code would be again tedious (either ugly casts or qemu-style
separate object pointer). So i disliked it too.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Tested-by: Ashok kumar <ashoks@broadcom.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 2ef56d1dd64ffb75ed02a10dcdaf605e5b8ff4f8.1441784344.git.p.fedin@samsung.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The struct is not used anymore and can be eliminated.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
There are pieces of guest panic handling code
that can be shared in one generic function.
These code replaced by call qemu_system_guest_panicked().
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1435924905-8926-10-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-common.h includes some fixups for things the Win32
headers don't define or define weirdly. These really
belong in os-win32.h, so move them there.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
This allows us to store the current state to send it through migration.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit f41389ae3c introduced kvm_resamplefds_enabled() and
associated kvm_resamplefds_allowed boolean. This patch adds
non-KVM version for kvm_resamplefds_enabled and also declares
kvm_resamplefds_allowed in kvm-stub as it is done for fellow
kvm_irqfds_allowed.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
VFIO platform device needs to setup irqfd but it does not know the
gsi corresponding to the device qemu_irq. This patch proposes to
store a hash table in kvm_state using the qemu_irq as key and the gsi
as a value.
kvm_irqchip_set_qemuirq_gsi allows to insert such a pair. The interrupt
controller is supposed to use it.
kvm_irqchip_[add, remove]_irqfd_notifier allows to setup/tear down
irqfd directly from the qemu_irq.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Anticipating for the introduction of new add/remove functions taking
a qemu_irq parameter, let's rename existing ones with a gsi suffix.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Make kvm_memory_listener_register public, and assign a kernel
address space id to each KVMMemoryListener.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No semantic change, but s->slots moves into a new struct
KVMMemoryListener. KVM's memory listener becomes a member of struct
KVMState, and becomes of type KVMMemoryListener.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
i386 code will have to define a different KVMMemoryListener. Create
an internal header so that KVMSlot is not exposed outside.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce an API numa_get_node(ram_addr_t addr, Error **errp) that
returns the NUMA node to which the given address belongs to. This
API works uniformly for both boot time as well as hotplugged memory.
This API is needed by sPAPR PowerPC to support
ibm,dynamic-reconfiguration-memory device tree node which is needed for
memory hotplug.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Start storing the (start_addr, end_addr) of the pc-dimm memory
in corresponding numa_info[node] so that this information can be used
to lookup node by address.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This patch introduces the blk_drain() function which allows to replace
blk_drain_all() when only one BlockDriverState needs to be drained.
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1434537440-28236-2-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Remove semihosting_enabled and semihosting_target and replace them with
SemihostingConfig structure containing equivalent fields. The structure
is defined in vl.c where it is actually set.
Also introduce separate header file include/exec/semihost.h allowing to
access semihosting config related stuff from target specific semihosting
code.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1434643256-16858-2-git-send-email-leon.alrae@imgtec.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some convinience fluff: Add support for '-vga virtio', also add
virtio-vga to the list of vga cards so '-device virtio-vga' will
turn off the default vga.
Written by Dave Airlie and Gerd Hoffmann.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Split qemu_savevm_state_begin to:
qemu_savevm_state_header That writes the initial file header.
qemu_savevm_state_begin That sets up devices and does the first
device pass.
Used later in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
For historic reasons, ram migration have been on arch_init.c. Just
split it into migration/ram.c, the same that happened with block.c.
There is only code movement, no changes altogether.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This includes pxb support by Marcel, as well as multiple enhancements all over
the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVcC2WAAoJECgfDbjSjVRpwgcH/3mvFP3UmvmXyzf8mYtQ/1fR
ikvdTGHl2DR7TMQszNeCJn/p6NgH3oXRbXh39xM1xl9D2/dsZH9o1cUyFE04K9LK
am0cTmlty1OEyFN8BX1TtpngUxa5mpRA/+NYuWbh1FoTp6RoEPM6P+L1zLqtXYn1
REF++ehrsQI2Az2pibf4nul8bwuTWJLJeMS6TcCVCRGoaHsCESiVMu2sQrzEbWEW
E8ZWaXaiycLxLkW0/oU8BmZyrAk1PHdHwgbMUINV0kV5E2u+ZU+3KY79ezC2FyHW
NV7G9Rhh/5H828/cB6UP4CPZ4AYIYmg02iz5XBGKbd8WS9oPrJVK7EoqfU3oZfc=
=5AmP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, acpi, virtio, tpm
This includes pxb support by Marcel, as well as multiple enhancements all over
the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu Jun 4 11:51:02 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (28 commits)
vhost: logs sharing
hw/acpi: piix4_pm_init(): take fw_cfg object no more
hw/acpi: move "etc/system-states" fw_cfg file from PIIX4 to core
hw/acpi: acpi_pm1_cnt_init(): take "disable_s3" and "disable_s4"
pc-dimm: don't assert if pc-dimm alignment != hotpluggable mem range size
docs: Add PXB documentation
apci: fix PXB behaviour if used with unsupported BIOS
hw/pxb: add numa_node parameter
hw/pci: add support for NUMA nodes
hw/pxb: add map_irq func
hw/pci: inform bios if the system has extra pci root buses
hw/pci: introduce PCI Expander Bridge (PXB)
hw/pci: removed 'rootbus nr is 0' assumption from qmp_pci_query
hw/acpi: remove from root bus 0 the crs resources used by other buses.
hw/acpi: add _CRS method for extra root busses
hw/apci: add _PRT method for extra PCI root busses
hw/acpi: add support for i440fx 'snooping' root busses
hw/pci: extend PCI config access to support devices behind PXB
hw/i386: query only for q35/pc when looking for pci host bridge
hw/pci: made pci_bus_num a PCIBusClass method
...
Conflicts:
hw/i386/pc_piix.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* more EL2 preparation patches
* revert a no-longer-necessary workaround for old glib versions
* add GICv2m support to virt board (MSI support)
* pl061: fix wrong calculation of GPIOMIS register
* support MSI via irqfd
* remove a confusing v8_ prefix from some variable names
* add dynamic sysbus device support to the virt board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=s7uF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20150602' into staging
target-arm queue:
* more EL2 preparation patches
* revert a no-longer-necessary workaround for old glib versions
* add GICv2m support to virt board (MSI support)
* pl061: fix wrong calculation of GPIOMIS register
* support MSI via irqfd
* remove a confusing v8_ prefix from some variable names
* add dynamic sysbus device support to the virt board
# gpg: Signature made Tue Jun 2 17:30:38 2015 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20150602: (22 commits)
hw/arm/virt: change indentation in a15memmap
hw/arm/virt: add dynamic sysbus device support
hw/arm/boot: arm_load_kernel implemented as a machine init done notifier
hw/arm/sysbus-fdt: helpers for platform bus nodes addition
target-arm: Remove v8_ prefix from names of non-v8-specific cpreg arrays
arm_gicv2m: set kvm_gsi_direct_mapping and kvm_msi_via_irqfd_allowed
kvm: introduce kvm_arch_msi_data_to_gsi
pl061: fix wrong calculation of GPIOMIS register
target-arm: Add the GICv2m to the virt board
target-arm: Extend the gic node properties
arm_gicv2m: Add GICv2m widget to support MSIs
target-arm: Add GIC phandle to VirtBoardInfo
Revert "target-arm: Avoid g_hash_table_get_keys()"
target-arm: Add TLBI_VAE2{IS}
target-arm: Add TLBI_ALLE2
target-arm: Add TLBI_ALLE1{IS}
target-arm: Add TTBR0_EL2
target-arm: Add TPIDR_EL2
target-arm: Add SCTLR_EL2
target-arm: Add TCR_EL2
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
PCI root buses can be attached to a specific NUMA node.
PCI buses are not attached by default to a NUMA node.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Failure was included on commit
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On ARM the MSI data corresponds to the shared peripheral interrupt (SPI)
ID. This latter equals to the SPI index + 32. to retrieve the SPI index,
matching the gsi, an architecture specific function is introduced.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All QMP commands use the "new" handler interface (mhandler.cmd_new).
Most HMP commands still use the traditional interface (mhandler.cmd),
but a few use the "new" one. Complicates handle_user_command() for no
gain, so I'm converting these to the traditional interface.
pcie_aer_inject_error's implementation is split into the
hmp_pcie_aer_inject_error() and pcie_aer_inject_error_print(). The
former is a peculiar crossbreed between HMP and QMP handler. On
success, it works like a QMP handler: store QDict through ret_data
parameter, return 0. Printing the QDict is left to
pcie_aer_inject_error_print(). On failure, it works more like an HMP
handler: print error to monitor, return negative number.
To convert to the traditional interface, turn
pcie_aer_inject_error_print() into a command handler wrapping around
hmp_pcie_aer_inject_error(). By convention, this command handler
should be called hmp_pcie_aer_inject_error(), so rename the existing
hmp_pcie_aer_inject_error() to do_pcie_aer_inject_error().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
All QMP commands use the "new" handler interface (mhandler.cmd_new).
Most HMP commands still use the traditional interface (mhandler.cmd),
but a few use the "new" one. Complicates handle_user_command() for no
gain, so I'm converting these to the traditional interface.
For drive_del, that's easy: hmp_drive_del() sheds its unused last
parameter, and its return value, which the caller ignored anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Add a TPM2 ACPI table if a TPM 2 is used in the backend.
Also add an SSDT for the TPM 2.
Rename tpm_find() to tpm_get_version() and have this function
return the version of the TPM found, TPMVersion_Unspec if
no TPM is found. Use the version number to build version
specific ACPI tables.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following the recent upgrade to version 1.3, extend the TPM TIS
interface with capabilities introduced for support of a TPM 2.
TPM TIS for TPM 2 introduced the following extensions beyond the
TPM TIS 1.3 (used for TPM 1.2):
- A new 32bit interface Id register was introduced.
- New flags for the status (STS) register were defined.
- New flags for the capability flags were defined.
Support the above if a TPM TIS 1.3 for TPM 2 is used with a TPM 2
on the backend side. Support the old TPM TIS 1.3 configuration if a
TPM 1.2 is being used. A subsequent patch will then determine which
TPM version is being used in the backend.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The functions tpm_backend_thread_tpm_reset() and iothread_find()
are completely unused, let's remove them.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Let kvm_arch_post_run convert fields in the kvm_run struct to MemTxAttrs.
These are then passed to address_space_rw.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The lack of ffs(3) in the MinGW headers is a hint that we shouldn't rely
on it. MinGW 4.9.2 does not make it available for linking when QEMU's
./configure --enable-debug is used (release builds are fine though).
Now that all QEMU code has been switched to ctz32() there is no need for
ffs(3).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-9-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make address_space_rw take transaction attributes, rather
than always using the 'unspecified' attributes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Current default round-robin way of distributing VCPUs among
NUMA nodes might be wrong in case on multi-core/threads
CPUs. Making guests confused wrt topology where cores from
the same socket are on different nodes.
Allow a machine to override default mapping by providing
MachineClass::cpu_index_to_socket_id()
callback which would allow it group VCPUs from a socket
on the same NUMA node.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
More and more virtual machine specifics between kvm and qemu will be
transferred with vm attributes.
So we encapsulate the common logic in a generic function.
Additionally we need only to check during initialization if kvm supports
virtual machine attributes.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1426164834-38648-2-git-send-email-jfrei@linux.vnet.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Rename config option from "glx" to "opengl", glx will not be the only
option for opengl in near future. Also switch over to pkg-config for
opengl support detection.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
A bunch of fixes all over the place, some of the
bugs fixed are actually regressions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVAH/uAAoJECgfDbjSjVRprq0H/iyqLSHQIv6gNOPYQbLXOCv0
pkCeLx6kTMO9lSwxZcsZvMsYPeiEL3CHRKJcEjq0+Ap0uen0pa2Yl3WzyJcnBcib
xwkHk/UftFYAiZAzVtd4moXujvVLYNL1ukvr/wPOdIkTEn8U6K3NaT3pLooc369f
oTyQhlL3E9HJ5S6X0HXJIFwtsOIhPfS3NCLoDFbFjtb9mIsqTx7N5s2C5hctF+ir
JtyuwPx5oT73WYxoYmjSP6n/Nf5cuJdqtm6o2KijjhWWYMJ6epYVBo/DD6dIFbmJ
V/23dxpon+lvhae2c2LAVrkiJ1Boon/eMbJK/mNwpFX7vW35ataLPy6pYpaiEJs=
=RUld
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
misc fixes and cleanups
A bunch of fixes all over the place, some of the
bugs fixed are actually regressions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed Mar 11 17:48:30 2015 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (25 commits)
virtio-scsi: remove empty wrapper for cmd
virtio-scsi: clean out duplicate cdb field
virtio-scsi: fix cdb/sense size
uapi/virtio_scsi: allow overriding CDB/SENSE size
virtio-scsi: drop duplicate CDB/SENSE SIZE
exec: don't include hw/boards for linux-user
acpi: specify format for build_append_namestring
MAINTAINERS: drop aliguori@amazon.com
tpm: Move memory subregion function into realize function
virtio-pci: Convert to realize()
pci: Convert pci_nic_init() to Error to avoid qdev_init()
machine: query mem-merge machine property
machine: query dump-guest-core machine property
hw/boards: make it safe to include for linux-user
machine: query phandle-start machine property
machine: query kvm-shadow-mem machine property
kvm: add machine state to kvm_arch_init
machine: query kernel-irqchip property
machine: allowed/required kernel-irqchip support
machine: replace qemu opts with iommu property
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Needed to query machine's properties.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=hlbC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches for 2.3
# gpg: Signature made Tue Mar 10 13:03:17 2015 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (73 commits)
MAINTAINERS: Add jcody as blockjobs, block devices maintainer
iotests: add O_DIRECT alignment probing test
block/raw-posix: fix launching with failed disks
MAINTAINERS: Add jsnow as IDE maintainer
sheepdog: Fix misleading error messages in sd_snapshot_create()
Add testcase for scsi-hd devices without drive property
scsi-hd: fix property unset case
block/vdi: Add locking for parallel requests
iotests: Drop vpc from 004's and 104's format list
iotests: Remove 006
iotests: Fix 051's reference output
virtio-blk: Remove the stale FIXME comment
tests: Check QVIRTIO_F_ANY_LAYOUT flag in virtio-blk test
libqos: Solve bug in interrupt checking when using MSIX in virtio-pci.c
sheepdog: fix confused return values
qtest/ahci: add fragmented dma test
qtest/ahci: Add PIO and LBA48 tests
qtest/ahci: Add DMA test variants
libqos/ahci: add ahci command helpers
qtest/ahci: Add a macro bootup routine
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424087278-49393-5-git-send-email-tumanova@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU/CoXAAoJECgfDbjSjVRpX7EH/RMmgtsDO4wvqJu++lHvkB/q
kSaXZYTpJTo0i5JE7n2brwuXA4902tTg9g5TMUpGPh9Pt2QRg7RTgGC1vqZyOBos
MPw+4BO2v66S6qgX7bOf222z7r64cHTY7pLkQlrfD4usPlu2eusZ64UTW6Ru51fW
WF9E9aunbl+HnuCGq6Iez3sCLscTBJpU/lEr6oSyHhuq3aa0CjjraEeV0E/QcwJG
HTUeFymL8NFvlXZblsLI++VOv7Mxpi6yiCQ5XoKpFgGMvidwo41Aso6gB3ySGxOd
w8O3Nbu77Iw/StDRNCg/5/GapabMKh2bE4UCsYY5OS63ZtD0fl0CCblhzm/ZFPw=
=LY/j
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream: (130 commits)
acpi: drop unused code
aml-build: comment fix
acpi-build: fix typo in comment
acpi: update generated files
vhost user:support vhost user nic for non msi guests
aml-build: fix build for glib < 2.22
acpi: update generated files
Makefile.target: binary depends on config-devices
acpi-test-data: update after pci rewrite
acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb().
pci-hotplug-old: Has been dead for five major releases, bury
pci: Give a few helpers internal linkage
acpi: make build_*() routines static to aml-build.c
pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs
pc: acpi-build: drop template patching and create PCI bus tree dynamically
tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation
pc: acpi-build: simplify PCI bus tree generation
tests: add ACPI blobs for qemu with bridge cases
tests: bios-tables-test: add support for testing bridges
tests: ACPI test blobs update due to PCI0._CRS changes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
hw/pci/pci-hotplug-old.c
Commit 79ca616 (v1.6.0) accidentally disabled legacy x86-only HMP
commands pci_add, pci_del: it defined CONFIG_PCI_HOTPLUG only as make
variable, not as preprocessor macro, killing the code conditional on
defined(CONFIG_PCI_HOTPLUG_OLD).
In all this time, nobody reported the loss. I only noticed it when I
tried to test some error reporting change that forced me to touch this
old crap again.
Fun: git-log hw/pci/pci-hotplug-old.c shows our faith in the backward
compatibility god has been strong enough to sacrifice at its altar
about a dozen times, but not strong enough to even once verify the
legacy feature's still there, let alone works.
Remove the commands along with the code backing them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extend the backend to check whether the TPM_ContinueSelfTest
finished successfully and provide a flag to the TIS front-end
if it successfully finished. The TIS then sets a flag in
all localities in the STS register and keeps it until the next
reset.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
v2:
* generalized QAPI function definition for guest-memory-block-size
to guest-memory-block-info for future extensibility (Eric)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU48JYAAoJEDNTyc7xCLWEK+AH/R6b+ycKU3LKG3ZKcGE/vV45
szTtE6SKRQmANs1GwQy2qMubBtEFnmfsJSiWQNmPArmP20rZK0Yyy4PaLm7UrTYs
mpfNee6mlc8PnaMjdzlgBJInwJIx3hgV0UNl4e1h+DM6Xe6GqC6NGc8vdfuIW6is
zHCtH5mAId7ykC03KCVAtTTWFJlJyujrytsNd2jP3zkZlwcCOS08JG1U0SMaBjTq
WCZAxbDPuODUqrwimevST1IFstg50cnsW9wq2oLLCp/ZnsYtCdeSZQGIVDkjL8zR
stJRDKukY4ByU0zLjcDrBpdzTwOb6ndZp929ti6y+3dQUX3oTOhqgE8JT/kR+Qo=
=KpkU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2015-02-16-v2-tag' into staging
tag for qga-pull-2015-02-16-v2
v2:
* generalized QAPI function definition for guest-memory-block-size
to guest-memory-block-info for future extensibility (Eric)
# gpg: Signature made Tue Feb 17 22:36:08 2015 GMT using RSA key ID F108B584
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>"
# gpg: aka "Michael Roth <mdroth@utexas.edu>"
# gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CEAC C9E1 5534 EBAB B82D 3FA0 3353 C9CE F108 B584
* remotes/mdroth/tags/qga-pull-2015-02-16-v2-tag:
qemu-ga-win: Fail loudly on bare 'set-time'
qga: add memory block command that unsupported
qga: implement qmp_guest_get_memory_block_info() for Linux with sysfs
qga: implement qmp_guest_set_memory_blocks() for Linux with sysfs
qga: implement qmp_guest_get_memory_blocks() for Linux with sysfs
qga: introduce three guest memory block commmands with stubs
qga: implement file commands for Windows guest
guest agent: guest-file-open: refactoring
utils: drop strtok_r from envlist_parse
qga: add guest-set-user-password command
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function does some initialization that needs to be done after
machine init. The function may be eventually removed if we move the
CPUState.numa_node initialization to the CPU init code, but while the
function exists, lets give it a name that makes sense.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Renaming set_numa_nodes() and numa_init_func() to parse_numa_opts() and
parse_numa() makes the purpose of those functions clearer.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This allows us to make numa_init_func() static.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Now the only code that uses the variable is inside numa.c.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Not all sysemu.h users need the NUMA declarations, and keeping them in a
separate file makes it easier to see what are the interfaces provided by
numa.c.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Some are called do_info_SUBCOMMAND() (old ones, usually), some
hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND
pointlessly differs in spelling.
Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the
subcommand name with '-' replaced by '_'.
Exceptions:
* sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(),
sun4m_hmp_info_pic().
* lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(),
lm32_hmp_info_pic().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(),
and sometimes COMMAND pointlessly differs in spelling.
Normalize to hmp_COMMAND(), where COMMAND is exactly the command name
with '-' replaced by '_'.
Exceptions:
* do_device_add() and client_migrate_info() *not* renamed to
hmp_device_add(), hmp_client_migrate_info(), because they're also
QMP handlers. They still need to be converted to QAPI.
* do_memory_dump(), do_physical_memory_dump(), do_ioport_read(),
do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(),
hmp_i(), hmp_o(), because those names are too cryptic for my taste.
* do_info_help() renamed to hmp_info_help() instead of hmp_info(),
because it only covers help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The problem is that mingw 4.9.1 fails to compile the code with the
following warning:
/mingw/include/string.h:88:9: note: previous declaration of 'strtok_r'
was here
char *strtok_r(char * __restrict__ _Str,
const char * __restrict__ _Delim,
char ** __restrict__ __last);
/include/sysemu/os-win32.h:83:7: warning: redundant redeclaration of
'strtok_r' [-Wredundant-decls]
char *strtok_r(char *str, const char *delim, char **saveptr);
The problem is that compiles just fine on previous versions of mingw.
Compiler version check here is not a good idea. Though fortunately
strtok_r is used only once in the code and we could simply rewrite
the code without it.
Signed-off-by: Olga Krishtal <okrishtal@parallels.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
blk_new_with_bs() creates a BlockBackend with an empty BlockDriverState
attached to it. Empty BDSs are not nice, therefore add an alternative
function which combines blk_new_with_bs() with bdrv_open().
Note: In contrast to bdrv_open() which takes a BlockDriver parameter,
blk_new_open() does not take such a parameter. This is because
bdrv_open() opens a BlockDriverState, therefore it is natural to be able
to set the BlockDriver for that BDS. The fact that bdrv_open() can open
more than a single BDS is merely some form of a byproduct.
blk_new_open() on the other hand is intended to be used to create a
whole tree of BlockDriverStates. Therefore, setting a single BlockDriver
does not make much sense. Instead, the drivers to be used for each of
the nodes must be configured through the "options" QDict; including the
driver of the root BDS.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1423162705-32065-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Create the blk_* counterparts for the following bdrv_* functions (which
make sense to call on the BlockBackend level):
- bdrv_co_write_zeroes()
- bdrv_write_compressed()
- bdrv_truncate()
- bdrv_nb_sectors()
- bdrv_discard()
- bdrv_load_vmstate()
- bdrv_save_vmstate()
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that we have a working "generic" PCIe host bridge driver, we can plug
it into ARM's virt machine to always have PCIe available to normal ARM VMs.
I've successfully managed to expose a Bochs VGA device, XHCI and an e1000
into an AArch64 VM with this and they all lived happily ever after.
Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: Claudio Fontana <claudio.fontana@huawei.com>
[PMM: Squashed in fix for off-by-one error in bus-range DT property
from Laszlo Ersek <lersek@redhat.com>]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
on s390 MSI-X irqs are presented as thin or adapter interrupts
for this we have to reorganize the routing entry to contain
valid information for the adapter interrupt code on s390.
To minimize impact on existing code we introduce an architecture
function to fixup the routing entry.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The argument is not longer used and the implementation
uses now QOM instead of QemuOpts.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-id: 1420550957-22337-4-git-send-email-marcel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some ppc machines create a default usb controller based on a 'machine condition'.
Until now the logic was: create the usb controller if:
- the usb option was supplied in cli and value is true or
- the usb option was absent and both set_defaults and the machine
condition were true.
Modified the logic to:
Create the usb controller if:
- the machine condition is true and defaults are enabled or
- the usb option is supplied and true.
The main for this is to simplify the usb_enabled method.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-id: 1420550957-22337-2-git-send-email-marcel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It will be useful for checking when we change traditional
boot order dynamically and propagate error message
to the monitor.
For x86 architecture, we pass &local_err to set_boot_dev()
when vm startup in pc_coms_init().
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
It will be useful for checking when we change traditional
boot order dynamically and propagate error message
to the monitor.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
It will be useful for checking when we change traditional
boot order dynamically and propagate error message
to the monitor.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
First, we can downsize vl.c, make it simpler by
little and little. Second, I can maintain those code
and make some improvement.
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
- valgrind/KVM support
- small i386 patches
- PCI SD host controller support
- malloc/free cleanups from Markus (x86/scsi)
- IvyBridge model
- XSAVES support for KVM
- initial patches from record/replay
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUjw28AAoJEL/70l94x66D9kcH/RBoc4mNjrSt+MLy9Y+Fu1bu
HNhfd1n/yA0MKSHtSYwJPgkiuoxG3jHt0N69gbpZE0kdBcK+PPZZZUpTFIAU6vD/
D0O7l+2viOcl2z7SPuHIp9/O0CChsAYZkH+Zn2XbeStbe4d4f6bFzdy4vblMsirQ
BfMn/Y2Dw1uLknvrO3/QKgGhbK5Nxo/Te7lavRP+w7FgOhAdAUHOhBPfGrPWtG+0
0hVWmxoQyJtk+Ltt2oF4zUkql7czDsgyXkaO82l3TkecCvtqolCuby4lQIFJnq7E
vw0XUDwC/l/MWnXFq/rG97yopfIxkSAthT/xP/+TTJKM/oJEWDTh6I8ghQTdG90=
=ncys
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- Migration and linuxboot fixes for 2.2 regressions
- valgrind/KVM support
- small i386 patches
- PCI SD host controller support
- malloc/free cleanups from Markus (x86/scsi)
- IvyBridge model
- XSAVES support for KVM
- initial patches from record/replay
# gpg: Signature made Mon 15 Dec 2014 16:35:08 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (47 commits)
sdhci: Support SDHCI devices on PCI
sdhci: Define SDHCI PCI ids
sdhci: Add "sysbus" to sdhci QOM types and methods
sdhci: Remove class "virtual" methods
sdhci: Set a default frequency clock
serial: only resample THR interrupt on rising edge of IER.THRI
serial: update LSR on enabling/disabling FIFOs
serial: clean up THRE/TEMT handling
serial: reset thri_pending on IER writes with THRI=0
linuxboot: fix loading old kernels
kvm/apic: fix 2.2->2.1 migration
target-i386: add Ivy Bridge CPU model
target-i386: add f16c and rdrand to Haswell and Broadwell
target-i386: add VME to all CPUs
pc: add 2.3 machine types
i386: do not cross the pages boundaries in replay mode
cpus: make icount warp behave well with respect to stop/cont
timer: introduce new QEMU_CLOCK_VIRTUAL_RT clock
cpu-exec: invalidate nocache translation if they are interrupted
icount: introduce cpu_get_icount_raw
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Compute kvm_irqfds_allowed by checking the KVM_CAP_IRQFD extension.
Remove direct settings in architecture specific files.
Add a new kvm_resamplefds_allowed variable, initialized by
checking the KVM_CAP_IRQFD_RESAMPLE extension. Add a corresponding
kvm_resamplefds_enabled() function.
A special notice for s390 where KVM_CAP_IRQFD was not immediatly
advirtised when irqfd capability was introduced in the kernel.
KVM_CAP_IRQ_ROUTING was advertised instead.
This was fixed in "KVM: s390: announce irqfd capability",
ebc3226202d5956a5963185222982d435378b899 whereas irqfd support
was brought in 84223598778ba08041f4297fda485df83414d57e,
"KVM: s390: irq routing for adapter interrupts". Both commits
first appear in 3.15 so there should not be any kernel
version impacted by this QEMU modification.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adding something like a "delete notifier" to a BlockBackend would not
make much sense, because whoever is interested in registering there will
probably hold a reference to that BlockBackend; therefore, the notifier
will never be called (or only when the notifiee already relinquished its
reference and thus most probably is no longer interested in that
notification).
Therefore, this patch just passes through the close notifier interface
of the root BDS. This will be called when the device is ejected, for
instance, and therefore does make sense.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1416309679-333-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Because all BlockDriverStates behind a single BlockBackend reside in a
single AioContext, it is fine to just pass these functions
(blk_add_aio_context_notifier() and blk_remove_aio_context_notifier())
through to the root BlockDriverState.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1416309679-333-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are already some blk_aio_* functions, so we might as well have
blk_co_* functions (as far as we need them). This patch adds
blk_co_flush(), blk_co_discard(), and also blk_invalidate_cache() (which
is not a blk_co_* function but is needed nonetheless).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1416309679-333-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When more memory devices are used than available
KVM memory slots, QEMU crashes with:
kvm_alloc_slot: no free slot available
Aborted (core dumped)
Fix this by checking that KVM has a free slot before
attempting to map memory in guest address space.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJUYh9vAAoJEL7lnXSkw9fbgPQH/065L5+SpaJR1Nte9Lz3N2s1
a6tGSI22yu85tKvYCdYjeoVHSkSTyR57FdTfUd2xc2QPj+J4sWXpA81KILBGTJUp
NMpmLpWg4LOh8Ek4ViRgmFFdryzIFa4dT4gc1AcSAIAQ6jsgK1dM7m5kfncC3TN0
TUs248vJ2i/DaE0k8TOeJqxJTqInoFttlJEqG7RD+V5JznokE4zpFNXHDGx9BptE
W2J38GJ/TKRPe9UrHMKZI1r6+ZBdXyE/CaqsNNKLJdqrHgSQuAyK/PS6dQbM4BLg
M1qdP7Tp0wOlvv9qoEZMOEiUsi54XPqLgaLMbW74Yp5X459fqmLW2imy49pHXt8=
=klsW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2014-11-11' into staging
trivial patches for 2014-11-11
# gpg: Signature made Tue 11 Nov 2014 14:38:39 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
* remotes/mjt/tags/pull-trivial-patches-2014-11-11:
block: Fix comment for bdrv_co_get_block_status
sysbus: Correct SYSTEM_BUS(obj) defines
target-i386: cpu: keeping function parameters alignment on new line
xen-hvm: Remove redundant variable 'xstate'
coroutine-sigaltstack: Change jmp_buf to sigjmp_buf
pc-bios: petalogix-s3adsp1800.dtb: Use 'xlnx, xps-ethernetlite-2.00.a' instead of 'xlnx, xps-ethernetlite-2.00.b'
gdbstub: Add a missing case of signal number translation in gdbstub
numa: make 'info numa' take into account hotplugged memory
slirp/smbd: modify/set several parameters in generated smbd.conf
qemu-doc.texi: fix typos in x509 examples
icc_bus: fix typo ICC_BRIGDE -> ICC_BRIDGE
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When do memory hotplug, if there is numa node, we should add
the memory size to the corresponding node memory size.
It affects the result of hmp command "info numa".
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Remove the unused CPU hot-plug notifier.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Move device model attachment / detachment and the BlockDevOps device
model callbacks and their wrappers from BlockDriverState to
BlockBackend.
Wrapper calls in block.c change from
bdrv_dev_FOO_cb(bs, ...)
to
if (bs->blk) {
bdrv_dev_FOO_cb(bs->blk, ...);
}
No change, because both bdrv_dev_change_media_cb() and
bdrv_dev_resize_cb() do nothing when no device model is attached, and
a device model can be attached only when bs->blk.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockdev_init() always creates a DriveInfo, but only drive_new() fills
it in. qmp_blockdev_add() leaves it blank. This results in a drive
with type = IF_IDE, bus = 0, unit = 0. Screwed up in commit ee13ed1c.
Board initialization code looking for IDE drive (0,0) can pick up one
of these bogus drives. The QMP command has to execute really early to
be visible. Not sure how likely that is in practice.
Fix by creating DriveInfo in drive_new(). Block backends created by
blockdev-add don't get one.
Breaks the test for "has been created by qmp_blockdev_add()" in
blockdev_mark_auto_del() and do_drive_del(), because it changes the
value of dinfo && !dinfo->enable_auto_del from true to false. Simply
test !dinfo instead.
Leaves DriveInfo member enable_auto_del unused. Drop it.
A few places assume a block backend always has a DriveInfo. Fix them
up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Device models should access their block backends only through the
block-backend.h API. Convert them, and drop direct includes of
inappropriate headers.
Just four uses of BlockDriverState are left:
* The Xen paravirtual block device backend (xen_disk.c) opens images
itself when set up via xenbus, bypassing blockdev.c. I figure it
should go through qmp_blockdev_add() instead.
* Device model "usb-storage" prompts for keys. No other device model
does, and this one probably shouldn't do it, either.
* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
which has only the BlockDriverState.
* PC87312State has an unused BlockDriverState[] member.
The next two commits take care of the latter two.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I'll use it with block backends shortly, and the name is going to fit
badly there. It's a block layer thing anyway, not just a block driver
thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I'll use BlockDriverAIOCB with block backends shortly, and the name is
going to fit badly there. It's a block layer thing anyway, not just a
block driver thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The patch is big, but all it really does is replacing
dinfo->bdrv
by
blk_bs(blk_by_legacy_dinfo(dinfo))
The replacement is repetitive, but the conversion of device models to
BlockBackend is imminent, and will shorten it to just
blk_legacy_dinfo(dinfo).
Line wrapping muddies the waters a bit. I also omit tests whether
dinfo->bdrv is null, because it never is.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
drive_del() has become a trivial wrapper around blk_unref(). Get rid
of it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make the BlockBackend own the DriveInfo. Change blockdev_init() to
return the BlockBackend instead of the DriveInfo.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convenience function blk_new_with_bs() creates a BlockBackend with its
BlockDriverState. Callers have to unref both. The commit after next
will relieve them of the need to unref the BlockDriverState.
Complication: due to the silly way drive_del works, we need a way to
hide a BlockBackend, just like bdrv_make_anon(). To emphasize its
"special" status, give the function a suitably off-putting name:
blk_hide_on_behalf_of_do_drive_del(). Unfortunately, hiding turns the
BlockBackend's name into the empty string. Can't avoid that without
breaking the blk->bs->device_name equals blk->name invariant.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A block device consists of a frontend device model and a backend.
A block backend has a tree of block drivers doing the actual work.
The tree is managed by the block layer.
We currently use a single abstraction BlockDriverState both for tree
nodes and the backend as a whole. Drawbacks:
* Its API includes both stuff that makes sense only at the block
backend level (root of the tree) and stuff that's only for use
within the block layer. This makes the API bigger and more complex
than necessary. Moreover, it's not obvious which interfaces are
meant for device models, and which really aren't.
* Since device models keep a reference to their backend, the backend
object can't just be destroyed. But for media change, we need to
replace the tree. Our solution is to make the BlockDriverState
generic, with actual driver state in a separate object, pointed to
by member opaque. That lets us replace the tree by deinitializing
and reinitializing its root. This special need of the root makes
the data structure awkward everywhere in the tree.
The general plan is to separate the APIs into "block backend", for use
by device models, monitor and whatever other code dealing with block
backends, and "block driver", for use by the block layer and whatever
other code (if any) dealing with trees and tree nodes.
Code dealing with block backends, device models in particular, should
become completely oblivious of BlockDriverState. This should let us
clean up both APIs, and the tree data structures.
This commit is a first step. It creates a minimal "block backend"
API: type BlockBackend and functions to create, destroy and find them.
BlockBackend objects are created and destroyed exactly when root
BlockDriverState objects are created and destroyed. "Root" in the
sense of "in bdrv_states". They're not yet used for anything; that'll
come shortly.
A root BlockDriverState is created with bdrv_new_root(), so where to
create a BlockBackend is obvious. Where these roots get destroyed
isn't always as obvious.
It is obvious in qemu-img.c, qemu-io.c and qemu-nbd.c, and in error
paths of blockdev_init(), blk_connect(). That leaves destruction of
objects successfully created by blockdev_init() and blk_connect().
blockdev_init() is used only by drive_new() and qmp_blockdev_add().
Objects created by the latter are currently indestructible (see commit
48f364d "blockdev: Refuse to drive_del something added with
blockdev-add" and commit 2d246f0 "blockdev: Introduce
DriveInfo.enable_auto_del"). Objects created by the former get
destroyed by drive_del().
Objects created by blk_connect() get destroyed by blk_disconnect().
BlockBackend is reference-counted. Its reference count never exceeds
one so far, but that's going to change.
In drive_del(), the BB's reference count is surely one now. The BDS's
reference count is greater than one when something else is holding a
reference, such as a block job. In this case, the BB is destroyed
right away, but the BDS lives on until all extra references get
dropped.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
when we remove bootindex form qdev.property to qom.property,
we can use those functions set/get bootindex property for all
correlative devices. Meanwhile set the initial value of
bootindex to -1.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Introduce del_boot_device_path() to clean up fw_cfg content when
hot-unplugging a device that refers to a bootindex or update a
existent devcie's bootindex.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Chenliang <chenliang88@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Determine whether a given bootindex exists or not.
If exists, we report an error.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
the QOMification of accelerators, a fix for -kernel support on x86, and one
for a recently-introduced virtio-scsi optimization.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUNo9yAAoJEBRUblpOawnXQDkH/1M5DxmVwUv+SZtHEdpsT7Eq
UGjRzfYXsYP/WkEqxVzYJmN0HJn9z8uJZin/dqwDPQLjCy8gf/xuaNCfoZqMuxHw
iNaTgKpi9Uy0G0VWxjlZpRu8f5JjqHbJEP6aTT0hooBHaqQoBSm1fQh/pnCUvnpB
qDQeHcOjrzIMkQJ3Ji8z2s+CapHaiIa63hJqRJztS5vbonPjngjj87dA54eIqDtQ
RwXy58y+C8YMKqfpOG6lA+RxogESyyCfDBVUA1wwRDad1mOFKUMtEd4jAL39HUgR
qINSKybG12V2bx8E+vNbaKB+68+NLdxcyR39JR2aun+a8yw+yDcF5BBiMXlqV0U=
=4bqy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Four changes here. Polling for reconnection of character devices,
the QOMification of accelerators, a fix for -kernel support on x86, and one
for a recently-introduced virtio-scsi optimization.
# gpg: Signature made Thu 09 Oct 2014 14:36:50 BST using RSA key ID 4E6B09D7
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream: (28 commits)
qemu-char: Fix reconnect socket error reporting
qemu-sockets: Add error to non-blocking connect handler
qemu-error: Add error_vreport()
virtio-scsi: fix use-after-free of VirtIOSCSIReq
linuxboot: compute initrd loading address
kvm: Make KVMState be the TYPE_KVM_ACCEL instance struct
accel: Create accel object when initializing machine
accel: Pass MachineState object to accel init functions
accel: Rename 'init' method to 'init_machine'
accel: Move accel init/allowed code to separate function
accel: Remove tcg_available() function
accel: Move qtest accel registration to qtest.c
accel: Move Xen registration code to xen-common.c
accel: Move KVM accel registration to kvm-all.c
accel: Report unknown accelerator as "not found" instead of "does not exist"
accel: Make AccelClass.available() optional
accel: Use QOM classes for accel types
accel: Move accel name lookup to separate function
accel: Simplify configure_accelerator() using AccelType *acc variable
accel: Create AccelType typedef
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most of the machine options and machine state information is in the
MachineState object, not on the MachineClass. This will allow init
functions to use the MachineState object directly instead of
qemu_get_machine_opts() or the current_machine global.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Today, all accelerator init functions affect some global state:
* tcg_init() calls tcg_exec_init() and affects globals such as tcg_tcx,
page size globals, and possibly others;
* kvm_init() changes the kvm_state global, cpu_interrupt_handler, and possibly
others;
* xen_init() changes the xen_xc global, and registers a change state handler.
With the new accelerator QOM classes, initialization may now be split in two
steps:
* instance_init() will do basic initialization that doesn't affect any global
state and don't need MachineState or MachineClass data. This will allow
probing code to safely create multiple accelerator objects on the fly just
for reporting host/accelerator capabilities, for example.
* accel_init_machine()/init_machine() will save the accelerator object in
MachineState, and do initialization steps which still affect global state,
machine state, or that need data from MachineClass or MachineState.
To clarify the difference between those two steps, rename init() to
init_machine().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As the function always return 1, it is not needed anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As qtest_availble() returns 1 only when CONFIG_POSIX is set, keep
setting AccelClass.available to keep current behavior (this is different
from what we did for KVM and Xen).
This also allows us to make qtest_init_accel() static.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Note that this has an user-visible side-effect: instead of reporting
"KVM is not supported for this target", QEMU binaries not supporting KVM
will report "kvm accelerator does not exist".
As kvm_availble() always return 1 when CONFIG_KVM is enabled, we don't
need to set AccelClass.available anymore. kvm_enabled() is not being
completely removed yet only because qmp_query_kvm() still uses it.
This also allows us to make kvm_init() static.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of having a static AccelType array, register a class for each
accelerator type, and use class name lookup to find accelerator
information.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of duplicating the logic for the if_ide
(bus,unit) mappings, rely on the blockdev layer
for managing those mappings for us, and use the
drive_get_by_index call instead.
This allows ide_drive_get to work for AHCI HBAs
as well, and can be used in the Q35 initialization.
Lastly, change the nature of the argument to
ide_drive_get so that represents the number of
total drives we can support, and not the total
number of buses. This will prevent array overflows
if the units-per-default-bus property ever needs
to be adjusted for compatibility reasons.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412187569-23452-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The if_max_devs table as in the past been an immutable
default that controls the mapping of index => (bus,unit)
for all boards and all HBAs for each interface type.
Since adding this mapping information to the HBA device
itself is currently unwieldly from the perspective of
retrieving this information at option parsing time
(e.g, within drive_new), we consider the alternative
of marking the if_max_devs table mutable so that
later configuration and initialization can adjust the
mapping at will, but only up until a drive is added,
at which point the mapping is finalized.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1412187569-23452-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When users use command line options like -hda, -cdrom,
or even -drive if=ide, it is up to the board initialization
routines to pick up these drives and create backing
devices for them.
Some boards, like Q35, have not been doing this.
However, there is no warning explaining why certain
drive specifications are just silently ignored,
so this function adds a check to print some warnings
to assist users in debugging these sorts of issues
in the future.
This patch will not warn about drives added with if_none,
for which it is not possible to tell in advance if
the omission of a backing device is an issue.
A warning in these cases is considered appropriate.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1412187569-23452-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJUJbcwAAoJEH8JsnLIjy/WmckP/RBMK3gkr2aArp0k/sbdFcnW
D7GusGkoj1jXRVFKuG3d+T/nozJTX0mkfnaRo8QCg/5VVJtqeHfsfY6JHgppQEai
C5Z8gtzIFxsQNE0/8d2D6zJMnqsIeXAVtDONWgWcDOZstVXn+KEKOw5E3KCZeGxF
yLA+h4h8sncT3ysPE0/jnQqeIwGJpLusFXmICiRY2lXRcCgY/qniymUq25FZO69m
Isw8iVHrUr05u1kfthdQeSAmdPQqI5tK5siR4CERtO2XdlyiODmdo5DRZmATfGiL
CGUIJd30mvrKpqRpIk8gbuGEtz92RuTnyoi9xkLcKi52eWyflGH4gjN3ojYe5Pro
hRY06AcwI9lAVjCy7lKPO6dJn8RWOi/wkgfffK0CFujlo8r1BtwfCW0Y9koYuhdq
mM/K0IEbjNgOvacHLIMOTQuKz3DLv7QB8wZQ+cTkdmvC6kNGnqD9yrA4cAQP4kjR
wjm/WfDIRKPif6cMwgaOiQeNaL0VF2LIn4GRWgaiIqEYfcKzy65uBFoPqOlAoXr8
NtTzCIXDIBbTSzz3VLBKD22FOsP0pfPrMeXkf+GwJwStKMcp6PGY4iUd3+M3bfOP
iUsxTJ4Uw5zMg0MgOaaWnUaDdbRtKGtH1y2UA+4X3gO+3W8Vz0e8B5cPMBqN/mpy
lUS4mBA08mTvaLE520rp
=ManP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Fri 26 Sep 2014 19:57:52 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream:
qemu-iotests: Fail test if explicit test case number is unknown
block: Validate node-name
vpc: fix beX_to_cpu() and cpu_to_beX() confusion
docs: add blkdebug block driver documentation
block: Catch simultaneous usage of options and their aliases
block: Specify -drive legacy option aliases in array
block: Improve message for device name clashing with node name
qemu-nbd: Destroy the BlockDriverState properly
block: Keep DriveInfo alive until BlockDriverState dies
blockdev: Disentangle BlockDriverState and DriveInfo creation
blkdebug: show an error for invalid event names
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
kvmclock fix. This was reverted last minute for 2.1, but it is now back
with the problematic case fixed.
Note: I will soon switch to a subkey for signing purposes. To verify
future signed pull requests from me, please update my key with
"gpg --recv-keys 9B4D86F2". You should see 3 new subkeys---the
one for signing will be a 2048-bit RSA key, 4E6B09D7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=nP/e
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Usual mix of patches, the most important being Alex and Marcelo's
kvmclock fix. This was reverted last minute for 2.1, but it is now back
with the problematic case fixed.
Note: I will soon switch to a subkey for signing purposes. To verify
future signed pull requests from me, please update my key with
"gpg --recv-keys 9B4D86F2". You should see 3 new subkeys---the
one for signing will be a 2048-bit RSA key, 4E6B09D7.
# gpg: Signature made Fri 26 Sep 2014 15:34:44 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream:
kvm/valgrind: don't mark memory as initialized
po: fix conflict with %.mo rule in rules.mak
kvmvapic: fix migration when VM paused and when not running Windows
serial: check if backed by a physical serial port at realize time
serial: reset state at startup
target-i386: update fp status fix
hw/dma/i8257: Silence phony error message
kvmclock: Ensure time in migration never goes backward
kvmclock: Ensure proper env->tsc value for kvmclock_current_nsec calculation
Introduce cpu_clean_all_dirty
pit: fix pit interrupt can't inject into vm after migration
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the BDS's refcnt > 0, drive_del() destroys the DriveInfo, but not
the BDS. This can happen in three places:
* Device model destruction during unplug: blockdev_auto_del()
* Xen IDE unplug: pci_piix3_xen_ide_unplug()
* drive_del command when no device model is attached: do_drive_del()
The other callers of drive_del are on error paths where refcnt == 1.
If the user somehow manages to plug in a device model using a BDS that
has gone through drive_del(), the legacy configuration passed in
DriveInfo doesn't reach the device model, and automatic deletion on
unplug doesn't work. Worse, some device models such as scsi-disk
crash when DriveInfo doesn't exist.
This is theoretical; I didn't research an actual reproducer. The problem
was introduced when we replaced DriveInfo reference counting by BDS
reference counting in commit a94a3fa..fa510eb.
Fix by keeping DriveInfo alive until its BDS dies.
This affects qemu_drive_opts: now you can't reuse the same ID for new
drive options until the BDS dies. Before, you could, but since the
code always attempts to create a BDS with the same ID next, the
enclosing operation "create a new drive" failed anyway. Different
error path, same result.
Unfortunately, the fix involves use of blockdev.c stuff from block.c,
which is a layering violation. Fortunately, my forthcoming
BlockBackend work will get rid of it again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Every QEMU_ARCH is now in (1 << n) notation, instead of a mixture of decimal and hexadecimal.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Now we have removed the legacy register_char_driver() we can
rename register_char_driver_qapi() to the more obvious and
shorter name.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1409653457-27863-6-git-send-email-peter.maydell@linaro.org
Now that all the char backends have been converted to the QAPI
framework we can remove the machinery for handling old style
backends.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1409653457-27863-5-git-send-email-peter.maydell@linaro.org
The plan is to add new accounting metrics (latency, invalid requests, failed
requests, queue depth) and block.c is overpopulated so it will be better to work
in a separate module.
Moreover the long term plan is to have statistics in each of the BDS of the graph
for metrology purpose; this means that the device model statistics must move from
the topmost BDS to the device model.
So we need to decouple the statistic code from BlockDriverState.
This is another argument for the extraction of the code in a separate module.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Benoit Canet <benoit@irqsave.net>
CC: Fam Zheng <famz@redhat.com>
CC: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We now can call KVM_CHECK_EXTENSION on the kvm fd or on the vm fd, whereas
the vm version is more accurate when it comes to PPC KVM.
Add a helper to make the vm version available that falls back to the non-vm
variant if the vm one is not available yet to stay compatible.
Signed-off-by: Alexander Graf <agraf@suse.de>
From: Paolo Bonzini <pbonzini@redhat.com>
chr-testdev enables a virtio serial channel to be used for guest
initiated qemu exits. hw/misc/debugexit already enables guest
initiated qemu exits, but only for PC targets. chr-testdev supports
any virtio-capable target. kvm-unit-tests/arm is already making use
of this backend.
Currently there is a single command implemented, "q". It takes a
(prefix) argument for the exit code, thus an exit is implemented by
writing, e.g. "1q", to the virtio-serial port.
It can be used as:
$QEMU ... \
-device virtio-serial-device \
-device virtserialport,chardev=ctd -chardev testdev,id=ctd
or, use:
$QEMU ... \
-device virtio-serial-device \
-device virtconsole,chardev=ctd -chardev testdev,id=ctd
to bind it to virtio-serial port0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit cdaa86a54b
("Add G_IO_HUP handler for socket chardev")
GLib limitation results in a bug on Windows host. Steps to reproduce:
Start qemu: qemu-system-i386 -qmp tcp:127.0.0.1:4444:server:nowait
Connect with telnet: telnet 127.0.0.1 4444
Try sending some data from telnet.
Expected result: answers from QEMU.
Observed result: no answers (actually tcp_chr_read is not called at all).
Due to GLib limitations it is not possible to create several watches on one
channel on Windows hosts. See bug #338943 in GNOME bugzilla for details:
https://bugzilla.gnome.org/show_bug.cgi?id=338943
This reimplements commit cdaa86a54b
("Add G_IO_HUP handler for socket chardev") using a single watch:
Handle G_IO_HUP in tcp_chr_read instead. It is already watched by a
corresponding watch. Remove the second watch with its handler.
Cc: Antonios Motakis <a.motakis@virtualopensystems.com>
Cc: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Nikita Belov <zodiac@ispras.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Based on "enable sparse node numbering" patch from Nishanth Aravamudan,
but without the code to actually support sparse node IDs. This just adds
the code to keep track of present/non-present nodes on the command-line,
without changing any behavior.
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
[Rename max_numa_node to max_numa_nodeid -Eduardo]
[Initialize max_numa_nodeid to 0 -Eduardo]
[Use MAX() macro when setting max_numa_nodeid -Eduardo]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This will let threads other than the I/O thread raise QMP events.
GIOChannel is thread-safe, and send and receive state is usually
well-separated. The only driver that requires some care is the
pty driver, where some of the state is shared by the read and write
sides. That state is protected with the chr_write_lock too.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The next patch will modify this function to initialize state that is
common to all backends.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This patch also eliminates build time warning caused by no caller
of monitor_qapi_event_throttle().
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Since gettimeofday() is used in this header file as a macro define,
include the function's define header file, to avoid compile warning
when other file include os-posix.h.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
move generic chardev APIs to sysemu/char.h, to make them available to
callers which can not depend on the whole of ui/console.h.
This fixes a build error on systems without pixman-devel:
./configure --disable-tools --disable-docs --target-list=arm-linux-user
...
pixman none
...
make
...
In file included from
/data/home/nchip/linaro/qemu/include/ui/console.h:4:0,
from /data/home/nchip/linaro/qemu/stubs/vc-init.c:2:
/data/home/nchip/linaro/qemu/include/ui/qemu-pixman.h:14:20: fatal
error: pixman.h: No such file or directory
#include <pixman.h>
^
compilation terminated.
Reported-by: Riku Voipio <riku.voipio@iki.fi>
Tested-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1403508500-32691-1-git-send-email-mst@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There patch protects vmstop_requested with a lock and introduces
qemu_system_vmstop_request_prepare.
Together with the new call to qemu_vmstop_requested in vm_start,
qemu_system_vmstop_request_prepare avoids a race where the VM could remain
stopped even though the iostatus of a block device has already been set
(for example).
qemu_system_vmstop_request_prepare however also lets the caller thread
delay observation of the state change until it has itself communicated
that change to the user. This delay avoids any possibility of a wrong
reordering of the BLOCK_IO_ERROR event and the subsequent STOP event.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* remotes/kvm/uq/master:
hw/mips: malta: Don't boot from flash with KVM T&E
MAINTAINERS: Add entry for MIPS KVM
target-mips: Enable KVM support in build system
hw/mips: malta: Add KVM support
hw/mips: In KVM mode, inject IRQ2 (I/O) interrupts via ioctls
target-mips: Call kvm_mips_reset_vcpu() from mips_cpu_reset()
target-mips: kvm: Add main KVM support for MIPS
kvm: Allow arch to set sigmask length
target-mips: get_physical_address: Add KVM awareness
target-mips: get_physical_address: Add defines for segment bases
hw/mips: Add API to convert KVM guest KSEG0 <-> GPA
hw/mips/cputimer: Don't start periodic timer in KVM mode
target-mips: Reset CPU timer consistently
KVM: Fix GSI number space limit
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[Raise errors on setting properties if !CONFIG_NUMA. Add BUILD_BUG_ON
checks. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
And allow preallocation of file-based memory even without -mem-prealloc.
Some care is necessary because -mem-prealloc does not allow disabling
preallocation for hostmem-file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows the superclass to set various policies on the memory
region that the subclass creates. Drops hostmem-ram's complete method
accordingly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This option provides the infrastructure for binding guest NUMA nodes
to host NUMA nodes. For example:
-object memory-ram,size=1024M,policy=bind,host-nodes=0,id=ram-node0 \
-numa node,nodeid=0,cpus=0,memdev=ram-node0 \
-object memory-ram,size=1024M,policy=interleave,host-nodes=1-3,id=ram-node1 \
-numa node,nodeid=1,cpus=1,memdev=ram-node1
The option replaces "-numa node,mem=".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
MST: conflict resolution
So that backends can use it.
Since we need the page size for efficiency, move code to compute it
out of translate-all.c and into util/oslib-win32.c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Split the internal interface in exec.c to a separate function, and
push the check on mem_path up to memory_region_init_ram.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: resolve conflicts
libnuma choosed 128 for MAX_NODES, so we follow libnuma here.
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the numa_info structure to contain the numa nodes memory,
VCPUs information and the future added numa nodes host memory
policies.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
[Fix hw/ppc/spapr.c - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
MST: comment tweaks
This is used to detect that the remote end has disconnected. Just call
tcp_char_disconnect on receiving this event.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This extends the existing qemu_chr_fe_get_msgfd by allowing to read a set
of fds. The function for receiving the fds - unix_process_msgfd is extended
to allocate the needed array size.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will set an array of file descriptors to the internal structures.
The next time a message is send the array will be send as ancillary
data. This feature works on the UNIX domain socket backend only.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This function will attempt to read data from the chardev trying
to fill the buffer up to the given length.
Add tcp_chr_disconnect to reuse disconnection code where needed.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a function to check if the eventfd capability is present in KVM in
the host kernel.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Provides framework for splitting host RAM allocation/
policies into a separate backend that could be used
by devices.
Initially only legacy RAM backend is provided, which
uses memory_region_init_ram() allocator and compatible
with every CLI option that affects memory_region_init_ram().
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MIPS/Linux is unusual in having 128 signals rather than just 64 like
most other architectures. This means its sigmask is 16 bytes instead of
8, so allow arches to override the sigmask->len value passed to the
KVM_SET_SIGNAL_MASK ioctl in kvm_set_signal_mask() by calling
kvm_set_sigmask_len() from kvm_arch_init(). Otherwise default to 8
bytes.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Sanjay Lal <sanjayl@kymasys.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This pull request brings a lot of fun things. Among others we have
- e500: u-boot firmware support
- sPAPR: magic page enablement
- sPAPR: add "compat" CPU option to support older guests
- sPAPR: refactorings in preparation for VFIO
- POWER8 live migration
- mac99: expose bus frequency
- little endian core dump, gdb and disas support
- new ppc64le-linux-user target
- DFP emulation
- bug fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=hi5L
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging
Patch queue for ppc - 2014-06-16
This pull request brings a lot of fun things. Among others we have
- e500: u-boot firmware support
- sPAPR: magic page enablement
- sPAPR: add "compat" CPU option to support older guests
- sPAPR: refactorings in preparation for VFIO
- POWER8 live migration
- mac99: expose bus frequency
- little endian core dump, gdb and disas support
- new ppc64le-linux-user target
- DFP emulation
- bug fixes
# gpg: Signature made Mon 16 Jun 2014 12:28:32 BST using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found
* remotes/agraf/tags/signed-ppc-for-upstream: (156 commits)
spapr_pci: Advertise MSI quota
PPC: KVM: Make pv hcall endian agnostic
powerpc: use float64 for frsqrte
spapr: Add kvm-type property
spapr: Create SPAPRMachine struct
linux-user: Tell guest about big host page sizes
spapr_hcall: Add address-translation-mode-on-interrupt resource in H_SET_MODE
spapr_hcall: Split h_set_mode()
target-ppc: Enable DABRX SPR and limit it to <=POWER7
target-ppc: Enable PPR and VRSAVE SPRs migration
target-ppc: Add POWER8's Event Based Branch (EBB) control SPRs
KVM: target-ppc: Enable TM state migration
target-ppc: Add POWER8's TM SPRs
target-ppc: Add POWER8's MMCR2/MMCRS SPRs
target-ppc: Enable FSCR facility check for TAR
target-ppc: Add POWER8's FSCR SPR
target-ppc: Add POWER8's TIR SPR
target-ppc: Refactor class init for POWER7/8
target-ppc: Switch POWER7/8 classes to use correct PMU SPRs
target-ppc: Make use of gen_spr_power5p_lpar() for POWER7/8
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make DumpState and endian conversion routines available for arch-specific dump
code by moving into dump.h. DumpState will be needed by arch-specific dump
code to access target endian information from DumpState->ArchDumpInfo. Also
break the dependency of dump.h from stubs/dump.c by creating a separate
dump-arch.h.
This patch doesn't change any functionality.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
[ rebased on top of current master branch,
renamed endian helpers to cpu_to_dump{16,32,64},
pass a DumpState * argument to endian helpers,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
[agraf: fix to apply]
Signed-off-by: Alexander Graf <agraf@suse.de>
