We should stop if the GET_IOVA_RANGE ioctl failed.
Signed-off-by: Longpeng <longpeng2@huawei.com>
Message-Id: <20221224114848.3062-3-longpeng2@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
In commit a585fad26b ("vdpa: request iova_range only once") we remove
GET_IOVA_RANGE form vhost_vdpa_init, the generic vdpa device will start
without iova_range populated, so the device won't work. Let's call
GET_IOVA_RANGE ioctl explicitly.
Fixes: a585fad26b ("vdpa: request iova_range only once")
Signed-off-by: Longpeng <longpeng2@huawei.com>
Message-Id: <20221224114848.3062-2-longpeng2@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
So qemu emulates it even in case the device does not support it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221221115015.1400889-5-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since this capability is emulated by qemu shadowed CVQ cannot forward it
to the device. Process all that command within qemu.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20221221115015.1400889-4-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Isolate control virtqueue in its own group, allowing to intercept control
commands but letting dataplane run totally passthrough to the guest.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20221215113144.322011-13-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
The memory listener that thells the device how to convert GPA to qemu's
va is registered against CVQ vhost_vdpa. memory listener translations
are always ASID 0, CVQ ones are ASID 1 if supported.
Let's tell the listener if it needs to register them on iova tree or
not.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-12-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CVQ can be shadowed two ways:
- Device has x-svq=on parameter (current way)
- The device can isolate CVQ in its own vq group
QEMU needs to check for the second condition dynamically, because CVQ
index is not known before the driver ack the features. Since this is
dynamic, the CVQ isolation could vary with different conditions, making
it possible to go from "not isolated group" to "isolated".
Saving the cmdline parameter in an extra field so we never disable CVQ
SVQ in case the device was started with x-svq cmdline.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-11-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
So the caller can choose which ASID is destined.
No need to update the batch functions as they will always be called from
memory listener updates at the moment. Memory listener updates will
always update ASID 0, as it's the passthrough ASID.
All vhost devices's ASID are 0 at this moment.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-10-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The next patches will start control SVQ if possible. However, we don't
know if that will be possible at qemu boot anymore.
Since the moved checks will be already evaluated at net/ to know if it
is ok to shadow CVQ, move them.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-8-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently iova range is requested once per queue pair in the case of
net. Reduce the number of ioctls asking it once at initialization and
reusing that value for each vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20221215113144.322011-7-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasonwang@redhat.com>
It will be reused at vdpa device start so let's extract in its own
function.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-6-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The has_FOO for pointer-valued FOO are redundant, except for arrays.
They are also a nuisance to work with. Recent commit "qapi: Start to
elide redundant has_FOO in generated C" provided the means to elide
them step by step. This is the step for qapi/net.json.
Said commit explains the transformation in more detail. The invariant
violations mentioned there do not occur here.
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221104160712.3005652-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[Fixes for MacOS squashed in]
Commit 69e1c14aa2 ("virtio: core: vq reset feature negotation support")
enabled VIRTIO_F_RING_RESET by default for all virtio devices.
This feature is not currently emulated by QEMU, so for vhost and
vhost-user devices we need to make sure it is supported by the offloaded
device emulation (in-kernel or in another process).
To do this we need to add VIRTIO_F_RING_RESET to the features bitmap
passed to vhost_get_features(). This way it will be masked if the device
does not support it.
This issue was initially discovered with vhost-vsock and vhost-user-vsock,
and then also tested with vhost-user-rng which confirmed the same issue.
They fail when sending features through VHOST_SET_FEATURES ioctl or
VHOST_USER_SET_FEATURES message, since VIRTIO_F_RING_RESET is negotiated
by the guest (Linux >= v6.0), but not supported by the device.
Fixes: 69e1c14aa2 ("virtio: core: vq reset feature negotation support")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1318
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221121101101.29400-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
The citing commit has incorrect code in vhost_vdpa_receive() that returns
zero instead of full packet size to the caller. This renders pending packets
unable to be freed so then get clogged in the tx queue forever. When device
is being reset later on, below assertion failure ensues:
0 0x00007f86d53bb387 in raise () from /lib64/libc.so.6
1 0x00007f86d53bca78 in abort () from /lib64/libc.so.6
2 0x00007f86d53b41a6 in __assert_fail_base () from /lib64/libc.so.6
3 0x00007f86d53b4252 in __assert_fail () from /lib64/libc.so.6
4 0x000055b8f6ff6fcc in virtio_net_reset (vdev=<optimized out>) at /usr/src/debug/qemu/hw/net/virtio-net.c:563
5 0x000055b8f7012fcf in virtio_reset (opaque=0x55b8faf881f0) at /usr/src/debug/qemu/hw/virtio/virtio.c:1993
6 0x000055b8f71f0086 in virtio_bus_reset (bus=bus@entry=0x55b8faf88178) at /usr/src/debug/qemu/hw/virtio/virtio-bus.c:102
7 0x000055b8f71f1620 in virtio_pci_reset (qdev=<optimized out>) at /usr/src/debug/qemu/hw/virtio/virtio-pci.c:1845
8 0x000055b8f6fafc6c in memory_region_write_accessor (mr=<optimized out>, addr=<optimized out>, value=<optimized out>,
size=<optimized out>, shift=<optimized out>, mask=<optimized out>, attrs=...) at /usr/src/debug/qemu/memory.c:483
9 0x000055b8f6fadce9 in access_with_adjusted_size (addr=addr@entry=20, value=value@entry=0x7f867e7fb7e8, size=size@entry=1,
access_size_min=<optimized out>, access_size_max=<optimized out>, access_fn=0x55b8f6fafc20 <memory_region_write_accessor>,
mr=0x55b8faf80a50, attrs=...) at /usr/src/debug/qemu/memory.c:544
10 0x000055b8f6fb1d0b in memory_region_dispatch_write (mr=mr@entry=0x55b8faf80a50, addr=addr@entry=20, data=0, op=<optimized out>,
attrs=attrs@entry=...) at /usr/src/debug/qemu/memory.c:1470
11 0x000055b8f6f62ada in flatview_write_continue (fv=fv@entry=0x7f86ac04cd20, addr=addr@entry=549755813908, attrs=...,
attrs@entry=..., buf=buf@entry=0x7f86d0223028 <Address 0x7f86d0223028 out of bounds>, len=len@entry=1, addr1=20, l=1,
mr=0x55b8faf80a50) at /usr/src/debug/qemu/exec.c:3266
12 0x000055b8f6f62c8f in flatview_write (fv=0x7f86ac04cd20, addr=549755813908, attrs=...,
buf=0x7f86d0223028 <Address 0x7f86d0223028 out of bounds>, len=1) at /usr/src/debug/qemu/exec.c:3306
13 0x000055b8f6f674cb in address_space_write (as=<optimized out>, addr=<optimized out>, attrs=..., buf=<optimized out>,
len=<optimized out>) at /usr/src/debug/qemu/exec.c:3396
14 0x000055b8f6f67575 in address_space_rw (as=<optimized out>, addr=<optimized out>, attrs=..., attrs@entry=...,
buf=buf@entry=0x7f86d0223028 <Address 0x7f86d0223028 out of bounds>, len=<optimized out>, is_write=<optimized out>)
at /usr/src/debug/qemu/exec.c:3406
15 0x000055b8f6fc1cc8 in kvm_cpu_exec (cpu=cpu@entry=0x55b8f9aa0e10) at /usr/src/debug/qemu/accel/kvm/kvm-all.c:2410
16 0x000055b8f6fa5f5e in qemu_kvm_cpu_thread_fn (arg=0x55b8f9aa0e10) at /usr/src/debug/qemu/cpus.c:1318
17 0x000055b8f7336e16 in qemu_thread_start (args=0x55b8f9ac8480) at /usr/src/debug/qemu/util/qemu-thread-posix.c:519
18 0x00007f86d575aea5 in start_thread () from /lib64/libpthread.so.0
19 0x00007f86d5483b2d in clone () from /lib64/libc.so.6
Make vhost_vdpa_receive() return the size passed in as is, so that the
caller qemu_deliver_packet_iov() would eventually propagate it back to
virtio_net_flush_tx() to release pending packets from the async_tx queue.
Which corresponds to the drop path where qemu_sendv_packet_async() returns
non-zero in virtio_net_flush_tx().
Fixes: 846a1e85da ("vdpa: Add dummy receive callback")
Cc: Eugenio Perez Martin <eperezma@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221108041929.18417-2-jasowang@redhat.com>
Commit 8801ccd050 introduced a compilation failure with clang
version 10.0.0-4ubuntu1:
../../net/vhost-vdpa.c:654:16: error: variable 'vdpa_device_fd' is
used uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
} else if (opts->has_vhostfd) {
^~~~~~~~~~~~~~~~~
../../net/vhost-vdpa.c:662:33: note: uninitialized use occurs here
r = vhost_vdpa_get_features(vdpa_device_fd, &features, errp);
^~~~~~~~~~~~~~
../../net/vhost-vdpa.c:654:12: note: remove the 'if' if its condition
is always true
} else if (opts->has_vhostfd) {
^~~~~~~~~~~~~~~~~~~~~~~
../../net/vhost-vdpa.c:629:23: note: initialize the variable
'vdpa_device_fd' to silence this warning
int vdpa_device_fd;
^
= 0
1 error generated.
It's a false positive -- the compiler doesn't manage to figure out
that the error checks further up mean that there's no code path where
vdpa_device_fd isn't initialized. Put another way, the problem is
that we check "if (opts->has_vhostfd)" when in fact that condition
must always be true. A cleverer static analyser would probably warn
that we were checking an always-true condition.
Fix the compilation failure by removing the unnecessary if().
Fixes: 8801ccd050 ("vhost-vdpa: allow passing opened vhostfd to vhost-vdpa")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221031132901.1277150-1-peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Embed the setting of info_str in a function.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Similar to other vhost backends, vhostfd can be passed to vhost-vdpa
backend as another parameter to instantiate vhost-vdpa net client.
This would benefit the use case where only open file descriptors, as
opposed to raw vhost-vdpa device paths, are accessible from the QEMU
process.
(qemu) netdev_add type=vhost-vdpa,vhostfd=61,id=vhost-vdpa1
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The guest will see undefined behavior if it issue not negotiate
commands, bit it is expected somehow.
Simplify code deleting this check.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This entry was duplicated on referenced commit. Removing it.
Fixes: 402378407d ("vhost-vdpa: multiqueue support")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
So we are sure we can update the device model properly before sending to
the device.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Same way as with the MAC, restore the expected number of queues at
device's start.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since there may be many commands we need to issue to load the NIC
state, let's split them in individual functions
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This allows to simplify the code. Rename to status while we're at it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We can restore the device state in the destination via CVQ now. Remove
the migration blocker.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is needed so the destination vdpa device see the same state a the
guest set in the source.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
So we can reuse it to inject state messages.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
--
v7:
* Remove double free error
v6:
* Do not assume in buffer sent to the device is sizeof(virtio_net_ctrl_ack)
v5:
* Do not use an artificial !NULL VirtQueueElement
* Use only out size instead of iovec dev_buffers for these functions.
Signed-off-by: Jason Wang <jasowang@redhat.com>
As this series will reuse them to restore the device state at the end of
a migration (or a device start), let's allocate only once at the device
start so we don't duplicate their map and unmap.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Next patches will add a new info callback to restore NIC status through
CVQ. Since only the CVQ vhost device is needed, create it with a new
NetClientInfo.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It's convenient to call iova_tree_remove from a map returned from
iova_tree_find or iova_tree_find_iova. With the current code this is not
possible, since we will free it, and then we will try to search for it
again.
Fix it making accepting the map by value, forcing a copy of the
argument. Not applying a fixes tag, since there is no use like that at
the moment.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
File descriptor vdpa_device_fd is not free in the case of returning
error from vhost_vdpa_get_features. Fixing it by making all errors go to
the same error path.
Resolves: Coverity CID 1490785
Fixes: 8170ab3f43 ("vdpa: Extract get features part from vhost_vdpa_get_max_queue_pairs")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220802112447.249436-2-eperezma@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Finally offering the possibility to enable SVQ from the command line.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
To know the device features is needed for CVQ SVQ, so SVQ knows if it
can handle all commands or not. Extract from
vhost_vdpa_get_max_queue_pairs so we can reuse it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Introduce the control virtqueue support for vDPA shadow virtqueue. This
is needed for advanced networking features like rx filtering.
Virtio-net control VQ copies the descriptors to qemu's VA, so we avoid
TOCTOU with the guest's or device's memory every time there is a device
model change. Otherwise, the guest could change the memory content in
the time between qemu and the device read it.
To demonstrate command handling, VIRTIO_NET_F_CTRL_MACADDR is
implemented. If the virtio-net driver changes MAC the virtio-net device
model will be updated with the new one, and a rx filtering change event
will be raised.
More cvq commands could be added here straightforwardly but they have
not been tested.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Do a simple forwarding of CVQ buffers, the same work SVQ could do but
through callbacks. No functional change intended.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
... such that no memory leaks on dangling net clients in case of
error.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1651890498-24478-4-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Qemu falls back on userland handlers even if vhost-user and vhost-vdpa
cases. These assumes a tap device can handle the packets.
If a vdpa device fail to start, it can trigger a sigsegv because of
that. Add dummy receiver that returns no progress so it can keep
running.
Fixes: 1e0a84ea49 ("vhost-vdpa: introduce vhost-vdpa net client")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20211125101614.76927-2-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Since net_init_vhost_vdpa is trying to open it. Not specifying it in the
command line crash qemu.
Fixes: 7327813d17 ("vhost-vdpa: open device fd in net_init_vhost_vdpa()")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20211112193431.2379298-3-eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is no reason to keep using the old one, since we neither use the
variadics arguments nor open it with O_DIRECT.
Also, net_client_init1, the caller of net_init_vhost_vdpa, wants all
net_client_init_fun to use Error API, so it's a good step in that
direction.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20211112193431.2379298-2-eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use g_autofree to ensure that `config` is freed when
vhost_vdpa_get_max_queue_pairs() returns.
Reported-by: Coverity (CID 1465228: RESOURCE_LEAK)
Fixes: 402378407d ("vhost-vdpa: multiqueue support")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20211102155157.241034-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This patch implements the multiqueue support for vhost-vdpa. This is
done simply by reading the number of queue pairs from the config space
and initialize the datapath and control path net client.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-11-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch switches to let net_vhost_vdpa_init() to return
NetClientState *. This is used for the callers to allocate multiqueue
NetClientState for multiqueue support.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-5-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch switches to open device fd in net_init_vhost_vpda(). This is
used to prepare for the multiqueue support.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-2-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-vdpa works only with specific devices. At startup, it second
guesses what the command line option handling will do and error out if
it thinks a non-virtio device will attach to them.
This second guessing is not only ugly, it can lead to wrong error
messages ('-device floppy,netdev=foo' should complain about an unknown
property, not about the wrong kind of network device being attached) and
completely ignores hotplugging.
Drop the old checks and implement .check_peer_type() instead to fix
this. As a nice side effect, it also removes one more dependency on the
legacy QemuOpts infrastructure and even reduces the code size.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-4-kwolf@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The queue_index of NetClientState should be assigned in set_netdev()
afterwards, so trying to net_vhost_vdpa_init() is meaningless. This
patch removes this.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-12-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Vhost_vdpa_add() can fail for various reasons, so the assertion of the
succeed is wrong. Instead, we should free the NetClientState and
propagate the error to the caller
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-11-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce new error label to avoid the unnecessary checking of net
pointer.
Fixes: 1e0a84ea49 ("vhost-vdpa: introduce vhost-vdpa net client")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-10-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 1e0a84ea49 ("vhost-vdpa: introduce vhost-vdpa net client")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-9-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The previous vhost_net_cleanup is sufficient for freeing, calling
vhost_vdpa_del() in this case will lead an extra round of free. Note
that this kind of "double free" is safe since vhost_dev_cleanup() zero
the whole structure.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-8-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
