More recent TIS specs extend the STS register to 32 bit. While
we don't store the TIS interface state, yet, we can extend it
without sideeffects.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The idea is that all other virtio devices are calling this helper
to merge properties of the proxy device. This is the only difference
in between this helper and code in inside virtio_instance_init_common.
The patch should not cause any harm as property list in generic balloon
code is empty.
This also allows to avoid some dummy errors like fixed by this
commit 91ba212088
Author: Gonglei <arei.gonglei@huawei.com>
Date: Tue Sep 30 14:10:35 2014 +0800
virtio-balloon: fix virtio-balloon child refcount in transports
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Raushaniya Maksudova <rmaksudova@parallels.com>
Revieved-by: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
relink binary whenever config-devices.mak changes:
this makes sense as we are adding/removing devices,
so binary has to be relinked to be up to date.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1424332114-13440-2-git-send-email-mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
V=1 should show what's going on, it's not nice
to silence things unconditionally.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1424332114-13440-1-git-send-email-mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch enables parallel building of QEMU in MSYS+MinGW environment.
Currently an attempt to build QEMU in parallel fails on generation of
version.lo (and version.o too).
The cause of the failure is that when listing prerequisites "Makefile"
references "config-host.h" by absolute path in some rules and by relative
path in others. Make cannot figure out that these references points to the
same file which leads to the race: the generation of "version.*" which
requires "$(BUILD_DIR)/config-host.h" is launched in parallel with the
generation of "config-host.h" needed by other "Makefile" targets.
This patch removes "$(BUILD_DIR)/" prefix from corresponding prerequisite
of "version.*". There is no other prerequisites "$(BUILD_DIR)/config-host.h"
found.
Also note that not every version of MSYS is able to build QEMU in parallel,
see: "http://sourceforge.net/p/mingw/bugs/1950/". The suggested version is
1.0.17.
Signed-off-by: Vasily Efimov <real@ispras.ru>
Message-Id: <1424264377-5992-1-git-send-email-real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Save the write protected flag and check before reopen.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1424839208-5195-1-git-send-email-famz@redhat.com>
[Fixed typo in the name of the new field. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the ivshmem device is built whenever both PCI and KVM support are
included. This patch gives it its own config option to allow easier
customization of whether to include it. It's enabled by default in the
same circumstances as now - when both PCI and KVM are available.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425017077-18487-4-git-send-email-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the "platform-bus" device is included for all softmmu builds.
This bridge is intended for use on any platforms that require dynamic
creation of sysbus devices. However, at present it is used only for the
PPC E500 target, with plans for the ARM "virt" target in the immediate
future.
To avoid a not-very-useful entry appearing in "qemu -device ?" output on
other targets, this patch makes a specific config option for platform-bus
and enables it (for now) only on ppc configurations which include E500
and on ARM (which always includes the "virt" target).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <1425017077-18487-3-git-send-email-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The i82801b11, ioh3420 and xio3130 PCI Express devices are currently
included in the build unconditionally.
While they could theoretically appear on any target platform with PCI-E,
they're pretty unlikely to appear on platforms that aren't Intel derived.
Therefore, to avoid presenting unlikely-to-be-relevant devices to the user,
add config options to enable these components, and enable them by default
only on x86 and arm platforms.
(Note that this patch does include these for aarch64, via its inclusion of
arm-softmmu.mak).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425017077-18487-2-git-send-email-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch replaces time() function calls with calls to
qemu_clock_get_ns(QEMU_CLOCK_HOST). It makes such requests deterministic
in record/replay mode of icount.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20150227131102.11912.89850.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's not safe to call blk_set_aio_context from outside BQL because of
the bdrv_drain_all there. Let's put it in the hotplug callback which
will be called by qdev device realization for each scsi device attached
to the bus.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1423969591-23646-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Even if the caller has both the old and the new AioContext's, there can
be a deadlock, due to the leading bdrv_drain_all.
Suppose there are four io threads (A, B, A0, B0) with A and B owning a
BDS for each (bs_a, bs_b); Now A wants to move bs_a to iothread A0, and
B wants to move bs_b to B0, at the same time:
iothread A iothread B
--------------------------------------------------------------------------
aio_context_acquire(A0) /* OK */ aio_context_acquire(B0) /* OK */
bdrv_set_aio_context(bs_a, A0) bdrv_set_aio_context(bs_b, B0)
-> bdrv_drain_all() -> bdrv_drain_all()
-> acquire A /* OK */ -> acquire A /* blocked */
-> acquire B /* blocked */ -> acquire B
... ...
Deadlock happens because A is waiting for B, and B is waiting for A.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1423969591-23646-2-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This mimics what is done in qdev_device_add, and lets the device be
freed in case something goes wrong. Otherwise, object_unparent returns
immediately without freeing the device, which is on the other hand left
in the parent bus's list of children.
scsi_bus_legacy_handle_cmdline then returns an error, and the HBA is
destroyed as well with object_unparent. But the lingering device that
was not removed in scsi_bus_legacy_add_drive cannot be removed now either,
and bus_unparent gets stuck in an infinite loop trying to empty the list
of children.
The right fix of course would be to assert in bus_add_child that the
device already has a bus, and remove the "safety net" that adds the
drive to the QOM tree in device_set_realized. I am not yet sure whether
that would entail changing all callers to qdev_create (as well as
isa_create and usb_create and the corresponding _try_create versions).
Reported-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't convert numbers or bools to strings for use with qemu_opt_set(),
simply use qemu_opt_set_number() or qemu_opt_set_bool() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Don't convert numbers to strings for use with qemu_opt_set(), simply
use qemu_opt_set_number() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
img_convert() and img_amend() use qemu_opts_do_parse(), which reports
errors with qerror_report_err(). Its error messages aren't helpful
here, the caller reports one that actually makes sense. Reproducer:
$ qemu-img convert -o backing_format=raw in.img out.img
qemu-img: Invalid parameter 'backing_format'
qemu-img: Invalid options for file format 'raw'
To fix, propagate errors through qemu_opts_do_parse(). This lifts the
error reporting into callers. Drop it from img_convert() and
img_amend(), keep it in qemu_chr_parse_compat(), bdrv_img_create().
Since I'm touching qemu_opts_do_parse() anyway, write a function
comment for it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Since I'm touching qemu_opts_parse() anyway, write a function comment
for it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the
error with qerror_report_err().
Most of its users assume the function can't fail. Make them use
qemu_opt_set_err() with &error_abort, so that should the assumption
ever break, it'll break noisily.
Just two users remain, in util/qemu-config.c. Switch them to
qemu_opt_set_err() as well, then rename qemu_opt_set_err() to
qemu_opt_set().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
bdrv_img_create() uses qemu_opt_set(), which reports errors with
qerror_report_err(). Its error messages aren't helpful here, the
caller reports one that actually makes sense. I don't know how to
trigger the error conditions, though.
Switch to qemu_opt_set_err() to get rid of the unwanted messages.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
add_old_style_options() for img_convert() and img_resize() use
qemu_opt_set(), which reports errors with qerror_report_err(). Its
error messages aren't helpful here, the caller reports one that
actually makes sense. Reproducer:
$ qemu-img convert -B raw in.img out.img
qemu-img: Invalid parameter 'backing_file'
qemu-img: Backing file not supported for file format 'raw'
Switch to qemu_opt_set_err() to get rid of the unwanted messages.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Return the Error object instead of reporting it with
qerror_report_err().
Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.
Turns out all callers outside its unit test assume that. We could
drop the Error ** argument, but that would make the interface less
regular, so don't.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Return the Error object instead of reporting it with
qerror_report_err().
Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.
Turns out all callers outside its unit test assume that. We could
drop the Error ** argument, but that would make the interface less
regular, so don't.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Return the Error object instead of reporting it with
qerror_report_err().
Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.
Turns out all callers outside its unit test assume that. We could
drop the Error ** argument, but that would make the interface less
regular, so don't.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
* remotes/qmp-unstable/queue/qmp:
qapi-types: add C99 index names to arrays
monitor: Fix missing err = NULL in client_migrate_info()
balloon: Fix typo
hmp: Fix warning from smatch (wrong argument in function call)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A bunch of code moved from dsdt to ssdt,
plus we got trivial changes like 0->Zero which our test
dosn't recognize as identity yet.
Update expected files to suppress test warning.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it will be used later to dynamically reserve MMIO region
instead of manually punching holes in PCI0._CRS
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces a static complied in DSDT MMIO region
for memory hotplug with one created at runtime
leaving only truly static memory hotplug related
ASL bits in DSDT. And replaces template patching
of MEMORY_SLOTS_NUMBER value with ASL API created
named value.
Later it also would make easier to reuse current
ACPI memory hotplug on other targets.
Also later it would be possible to move remaining
memory hotplug ASL methods into build_ssdt() and
add all memory hotplug related AML into SSDT only
when memory hotplug is enabled, further reducing
ACPI tables blob if memory hotplug isn't used.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
in addition it saves us ~330LOC and makes it one binary blob less
stored in QEMU source tree by removing need to keep and update
hw/i386/ssdt-mem.hex.generated file there.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces a static complied in DSDT MMIO region
for CPU hotplug with one created at runtime
leaving only truly static CPU hotplug related ASL
bits in DSDT.
It also puts CPU_HOTPLUG_RESOURCE_DEVICE into
PCI0 scope and reserves resources from it,
preparing for dropping manual hole punching
in PCI0._CRS.
Later it also would make easier to reuse current
ACPI CPU hotplug on other targets.
Also later it would be possible to move remaining
CPU hotplug ASL methods into build_ssdt() and
add all CPU hotplug related AML into SSDT only
when CPU hotplug is enabled, further reducing
ACPI tables blob if CPU hotplug isn't used.
impl. detail:
Windows XP can't handle /BSODs/ OperationRegion
declaration in DSDT when variable from SSDT is used
for specifying its address/length and also when
Field declared in DSDT with OperationRegion from
SSDT if DSDT is being parsed before SSDT.
But it works just fine when referencing named
fields from another table. Hence OperationRegion
and Field declaration are moved to SSDT to make
XP based editions work.
PS:
Later Windows editions seem to be fine with above
conditions.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
in addition it saves us ~400LOC and makes it
one binary blob less stored in QEMU source
tree by removing need to keep and update
hw/i386/ssdt-proc.hex.generated file there.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drops AML template patching and allows to
save some space in SSDT if pvpanic device doesn't
exist by not including disabled device description
into SSDT. It also makes device description
smaller by replacing _STA method with named value
and dropping _INI method.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Named/Reserved{Field} definition uses PkgLength [1] encoding to specify
field length, however it doesn't include size of PkgLength field itself,
while other block objects that have explicit length of its body account
for PkgLength size while encoding it [2].
This special casing isn't mentioned in ACPI spec, but that's what 'iasl'
compiles NamedField to so add extra argument to build_prepend_pkg_length()
to allow it handle the case.
--
1. ACPI Spec 5.0, 20.2.5.2 Named Objects Encoding, page 822
2. ACPI Spec 5.0, 5.4 Definition Block Encoding
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
