It is needed because it defines the BIOSConfig area.
Co-developed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <20231004083806.757242-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The djMEMC controller is used to store information related to the physical memory
configuration.
Co-developed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004083806.757242-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Introduce a model of Xilinx Versal's Configuration Frame broadcast
controller (CFRAME_BCAST_REG).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-7-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a model of Xilinx Versal's Configuration Frame controller
(CFRAME_REG).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20230831165701.2016397-6-francisco.iglesias@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a model of Xilinx Versal's Configuration Frame Unit's Single
Frame Read port (CFU_SFR).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-5-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a model of Xilinx Versal's Configuration Frame Unit's data out
port (CFU_FDRO).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-4-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a model of the software programming interface (CFU_APB) of
Xilinx Versal's Configuration Frame Unit.
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230831165701.2016397-3-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce the Xilinx Configuration Frame Interface (CFI) for transmitting
CFI data packets between the Xilinx Configuration Frame Unit models
(CFU_APB, CFU_FDRO and CFU_SFR), the Xilinx CFRAME controller (CFRAME_REG)
and the Xilinx CFRAME broadcast controller (CFRAME_BCAST_REG) models (when
emulating bitstream programming and readback).
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Acked-by: Edgar E. Iglesias <edgar@zeroasic.com>
Message-id: 20230831165701.2016397-2-francisco.iglesias@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20230823065335.1919380-14-mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
By default, C function prototypes declared in headers are visible,
so there is no need to declare them as 'extern' functions.
Remove this redundancy in a single bulk commit; do not modify:
- meson.build (used to check function availability at runtime)
- pc-bios/
- libdecnumber/
- tests/
- *.c
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230605175647.88395-5-philmd@linaro.org>
The SRC device is normally used to start the secondary CPU.
When running Linux directly, QEMU is emulating a PSCI interface that UBOOT
is installing at boot time and therefore the fact that the SRC device is
unimplemented is hidden as Qemu respond directly to PSCI requets without
using the SRC device.
But if you try to run a more bare metal application (maybe uboot itself),
then it is not possible to start the secondary CPU as the SRC is an
unimplemented device.
This patch adds the ability to start the secondary CPU through the SRC
device so that you can use this feature in bare metal applications.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: ce9a0162defd2acee5dc7f8a674743de0cded569.1692964892.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The watchdog timer is in the always-on domain device of HiFive 1 rev b,
so this patch added the AON device to the sifive_e machine. This patch
only implemented the functionality of the watchdog timer.
Signed-off-by: Tommy Wu <tommy.wu@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230627141216.3962299-2-tommy.wu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Only a few important registers are added, especially the SRAM_VER
register.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Types of memory that the SDRAM controller supports are DDR2/DDR3
and capacities of up to 2GiB. This commit adds emulation support
of the Allwinner R40 SDRAM controller.
This driver only support 256M, 512M and 1024M memory now.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CCU provides the registers to program the PLLs and the controls
most of the clock generation, division, distribution, synchronization
and gating.
This commit adds support for the Clock Control Unit which emulates
a simple read/write register interface.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This query copies the kernel command line into the message buffer. It
was previously stubbed out to return empty, this commit makes it reflect
the arguments specified with `-append`.
I observed the following peculiarities on my Pi 3B+:
- If the buffer is shorter than the string, the response header gives
the full length, but no data is actually copied.
- No NUL terminator is added: even if the buffer is long enough to fit
one, the buffer's original contents are preserved past the string's
end.
- The VC firmware adds the following extra parameters beside the
user-supplied ones (via /boot/cmdline.txt): `video`, `vc_mem.mem_base`
and `vc_mem.mem_size`. This is currently not implemented in qemu.
Signed-off-by: Daniel Bertalan <dani@danielbertalan.dev>
Message-id: 20230425103250.56653-1-dani@danielbertalan.dev
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added comment about NUL and short-buffer behaviour]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Migrate rtc_ref (which only needs to be 32-bit because it is summed to
a 32-bit register), which requires bumping the migration version.
The HPPA machine does not have versioned machine types so it is okay
to block migration to old versions of QEMU.
While at it, drop the write-only field rtc from LasiState.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QOM objects shouldn't access each other internals fields
except using the QOM API.
mips_cps_realize() instantiates a TYPE_MIPS_ITU object, and
directly sets the 'saar' pointer:
if (saar_present) {
s->itu.saar = &env->CP0_SAAR;
}
In order to avoid that, pass the MIPS_CPU object via a QOM
link property, and set the 'saar' pointer in mips_itu_realize().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20230203113650.78146-10-philmd@linaro.org>
Some length properties are signed, other unsigned:
hw/mips/cps.c:183: DEFINE_PROP_UINT32("num-vp", MIPSCPSState, num_vp, 1),
hw/mips/cps.c:184: DEFINE_PROP_UINT32("num-irq", MIPSCPSState, num_irq, 256),
hw/misc/mips_cmgcr.c:215: DEFINE_PROP_INT32("num-vp", MIPSGCRState, num_vps, 1),
hw/misc/mips_cpc.c:167: DEFINE_PROP_UINT32("num-vp", MIPSCPCState, num_vp, 0x1),
hw/misc/mips_itu.c:552: DEFINE_PROP_INT32("num-fifo", MIPSITUState, num_fifo,
hw/misc/mips_itu.c:554: DEFINE_PROP_INT32("num-semaphores", MIPSITUState,
Since negative values are not used (the minimum is '0'),
unify by declaring all properties as unsigned.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230203113650.78146-9-philmd@linaro.org>
This commit was created with scripts/clean-includes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-19-armbru@redhat.com>
The header hw/input/adb.h is included by some files that don't need
it. Clean it up and include only where necessary.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <f46bc751e8426f9d937c9540f2e67d2f0b2cc582.1672868854.git.balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
NPCM7XX models have been commited after the conversion from
commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible").
Manually convert them.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230109140306.23161-11-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
During SPL boot several DRAM Controller registers are used. Most
important registers are those related to DRAM initialization and
calibration, where SPL initiates process and waits until certain bit is
set/cleared.
This patch adds these registers, initializes reset values from user's
guide and updates state of registers as SPL expects it.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20221226220303.14420-3-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
During SPL boot several Clock Controller Module (CCM) registers are
read, most important are PLL and Tuning, as well as divisor registers.
This patch adds these registers and initializes reset values from user's
guide.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20221226220303.14420-2-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A number of headers neglect to include everything they need. They
compile only if the headers they need are already included from
elsewhere. Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221222120813.727830-3-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the
header don't actually need them. Similar structs live in their own
headers: PCIBusClass and PCIBus in pci_bus.h, PCIBridge in
pci_bridge.h, PCIHostBridgeClass and PCIHostState in pci_host.h,
PCIExpressHost in pcie_host.h, and PCIERootPortClass, PCIEPort, and
PCIESlot in pcie_port.h.
Move PCIDeviceClass and PCIDeviceClass to new pci_device.h, along with
the code that needs them. Adjust include directives.
This also enables the next commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221222100330.380143-6-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The system controller on PolarFire SoC is access via a mailbox. The
control registers for this mailbox lie in the "IOSCB" region & the
interrupt is cleared via write to the "SYSREG" region. It also has a
QSPI controller, usually connected to a flash chip, that is used for
storing FPGA bitstreams and used for In-Application Programming (IAP).
Linux has an implementation of the system controller, through which the
hwrng is accessed, leading to load/store access faults.
Add the QSPI as unimplemented and a very basic (effectively
unimplemented) version of the system controller's mailbox. Rather than
purely marking the regions as unimplemented, service the mailbox
requests by reporting failures and raising the interrupt so a guest can
better handle the lack of support.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221117225518.4102575-4-conor@kernel.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
On PolarFire SoC, some peripherals (eg the PCI root port) are clocked by
"Clock Conditioning Circuitry" in the FPGA. The specific clock depends
on the FPGA bitstream & can be locked to one particular {D,P}LL - in the
Icicle Kit Reference Design v2022.09 or later this is/will be the case.
Linux v6.1+ will have a driver for this peripheral and devicetrees that
previously relied on "fixed-frequency" clock nodes have been switched
over to clock-controller nodes. The IOSCB region is represented in QEMU,
but the specific region of it that the CCCs occupy has not so v6.1-rcN
kernels fail to boot in QEMU.
Add the regions as unimplemented so that the status-quo in terms of boot
is maintained.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-Id: <20221117225518.4102575-2-conor@kernel.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Convert the various subclasses of TYPE_MOS6522 to 3-phase reset.
This removes some uses of device_class_set_parent_reset(), which we
would eventually like to be able to get rid of.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221110143459.3833425-3-peter.maydell@linaro.org
The header target/arm/kvm-consts.h checks CONFIG_KVM which is marked as
poisoned in common code, so the files that include this header have to
be added to specific_ss and recompiled for each, qemu-system-arm and
qemu-system-aarch64. However, since the kvm headers are only optionally
used in kvm-constants.h for some sanity checks, we can additionally
check the NEED_CPU_H macro first to avoid the poisoned CONFIG_KVM macro,
so kvm-constants.h can also be used from "common" files (without the
sanity checks - which should be OK since they are still done from other
target-specific files instead). This way, and by adjusting some other
include statements in the related files here and there, we can move some
files from specific_ss into softmmu_ss, so that they only need to be
compiled once during the build process.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221202154023.293614-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All that is left in mac.h now belongs to the nvram emulation so rename
it accordingly and only include it where it is really used.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <b82449369f718c0e207fe8c332fab550fa0230c0.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Move the parts specific to and only used by macio out from the shared
mac.h into macio.c where they better belong.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <ac570ce9dcbae169310503689053807b8b4b86bc.1666957578.git.balaton@eik.bme.hu>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
In order to correctly report secure boot running firmware the values
of certain registers must be set.
We don't yet have documentation from ASPEED on what they mean. The
meaning is inferred from u-boot's use of them.
Introduce properties so the settings can be configured per-machine.
Reviewed-by: Peter Delevoryas <pdel@fb.com>
Tested-by: Peter Delevoryas <pdel@fb.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20220628154740.1117349-4-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This introduces a really basic PECI controller that responses to
commands by always setting the response code to success and then raising
an interrupt to indicate the command is done. This helps avoid getting
hit with constant errors if the driver continuously attempts to send a
command and keeps timing out.
The AST2400 and AST2500 only included registers up to 0x5C, not 0xFC.
They supported PECI 1.1, 2.0, and 3.0. The AST2600 and AST1030 support
PECI 4.0, which includes more read/write buffer registers from 0x80 to
0xFC to support 64-byte mode.
This patch doesn't attempt to handle that, or to create a different
version of the controller for the different generations, since it's only
implementing functionality that is common to all generations.
The basic sequence of events is that the firmware will read and write to
various registers and then trigger a command by setting the FIRE bit in
the command register (similar to the I2C controller).
Then the firmware waits for an interrupt from the PECI controller,
expecting the interrupt status register to be filled in with info on
what happened. If the command was transmitted and received successfully,
then response codes from the host CPU will be found in the data buffer
registers.
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220630045133.32251-12-me@pjd.dev>
[ clg: s/sysbus_mmio_map/aspeed_mmio_map/ ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
.. and clean up not longer needed conditionals in DSTD build code
pvpanic-isa AML will be fetched and included when ISA bridge will
build its own AML code (including attached devices).
Expected AML change:
the device under separate _SB.PCI0.ISA scope is moved directly
under Device(ISA) node.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-29-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cleaned up with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-5-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Change to generated file ebpf/rss.bpf.skeleton.h backed out]
Move the LASI device implementation from hw/hppa to hw/misc so that it is
located with all the other miscellaneous devices.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-43-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Per ast1030_v7.pdf, AST1030 HACE engine is identical to AST2600's HACE
engine.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The aspeed ast2600 accumulative mode is described in datasheet
ast2600v10.pdf section 25.6.4:
1. Allocating and initiating accumulative hash digest write buffer
with initial state.
* Since QEMU crypto/hash api doesn't provide the API to set initial
state of hash library, and the initial state is already set by
crypto library (gcrypt/glib/...), so skip this step.
2. Calculating accumulative hash digest.
(a) When receiving the last accumulative data, software need to add
padding message at the end of the accumulative data. Padding
message described in specific of MD5, SHA-1, SHA224, SHA256,
SHA512, SHA512/224, SHA512/256.
* Since the crypto library (gcrypt/glib) already pad the
padding message internally.
* This patch is to remove the padding message which fed byguest
machine driver.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220426021120.28255-3-steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Support HACE28: Hash HMAC Key Buffer Base Address Register.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220426021120.28255-2-steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Per ast1030_v07.pdf, AST1030 SOC doesn't have SCU300, the pclk divider
selection is defined in SCU310[11:8].
Add a get_apb_freq function and a class init handler for ast1030.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-7-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AST2600 clkin is always 25MHz, introduce clkin_25Mhz attribute
for aspeed_scu_get_clkin() to return the correct clkin for ast2600.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220315075753.8591-3-steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AST2600's HPLL register offset and bit definition are different from
AST2500. Add a hpll calculation function and an apb frequency calculation
function based on SCU200 register description in ast2600v11.pdf.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: checkpatch fixes ]
Message-Id: <20220315075753.8591-2-steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Similar to the Aspeed code in include/misc/aspeed_scu.h, we define
the PWRON STRAP fields in their corresponding module for NPCM7XX.
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Message-id: 20220411165842.3912945-2-wuhaotsh@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a model of the Xilinx Versal CRL.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Frederic Konrad <fkonrad@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20220406174303.2022038-4-edgar.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a model of the Xilinx ZynqMP APU Control.
Reviewed-by: Luc Michel <luc@lmichel.fr>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20220316164645.2303510-6-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
