Replace DeviceState dependency with VMStateIf on vmstate API.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Add an interface to get the instance id, instead of depending on
Device and qdev_get_dev_path().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When dropping backup-top, we need to drain the node before freeing the
BlockCopyState. Otherwise, requests may still be in flight and then the
assertion in shres_destroy() will fail.
(This becomes visible in intermittent failure of 056.)
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191219182638.104621-1-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit 6f6e1698a6 desugarized "-machine accel=" to a list
of "-accel" options. Since now "-machine accel" and "-accel"
became incompatible, update the iotests to the new format.
Error reported here:
https://gitlab.com/qemu-project/qemu/-/jobs/385801004#L3400
Reported-by: GitLab CI
Fixes: 6f6e1698a6 (vl: configure accelerators from -accel options)
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200106130951.29873-1-philmd@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add the case to the iotest #214 that checks possibility of writing
compressed data of more than one cluster size. The test case involves
the compress filter driver showing a sample usage of that.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1575288906-551879-4-git-send-email-andrey.shinkevich@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
QEMU currently supports writing compressed data of the size equal to
one cluster. This patch allows writing QCOW2 compressed data that
exceed one cluster. Now, we split buffered data into separate clusters
and write them compressed using the block/aio_task API.
Suggested-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1575288906-551879-3-git-send-email-andrey.shinkevich@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Allow writing all the data compressed through the filter driver.
The written data will be aligned by the cluster size.
Based on the QEMU current implementation, that data can be written to
unallocated clusters only. May be used for a backup job.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 1575288906-551879-2-git-send-email-andrey.shinkevich@virtuozzo.com
[mreitz: Replace NULL bdrv_get_format_name() by "(no format)"]
Signed-off-by: Max Reitz <mreitz@redhat.com>
The problem with allowing the data_file option is that you want to use a
different data file per image used in the test. Therefore, we need to
allow patterns like -o data_file='$TEST_IMG.data_file'.
Then, we need to filter it out from qemu-img map, qemu-img create, and
remove the data file in _rm_test_img.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-23-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191107163708.833192-22-mreitz@redhat.com
[mreitz: Also disable 273]
Signed-off-by: Max Reitz <mreitz@redhat.com>
We do not care about the json:{} filenames here, so we can just filter
them out and thus make the test work both with and without external data
files.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-21-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When using an external data file, there are no refcounts for data
clusters. We thus have to adjust the corruption test in this patch to
not be based around a data cluster allocation, but the L2 table
allocation (L2 tables are still refcounted with external data files).
Furthermore, we should not print qcow2.py's list of incompatible
features because it differs depending on whether there is an external
data file or not.
With those two changes, the test will work both with and without
external data files (once that options works with the iotests at all).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-20-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The only difference is that the json:{} filename of the image looks
different. We actually do not care about that filename in this test, we
are only interested in (1) that there is a json:{} filename, and (2)
whether the backing filename can be constructed.
So just filter out the json:{} data, thus making this test pass both
with and without data_file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-19-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The image end offset as reported by qemu-img check is different when
using an external data file; we do not care about its value here, so we
can just filter it. Incidentally, common.rc already has _check_test_img
for us which does exactly that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-18-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will not work with external data files, so try to get tests working
without it as far as possible.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-17-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Just rm will not delete external data files. Use _rm_test_img every
time we delete a test image.
(In the process, clean up the indentation of every _cleanup() this patch
touches.)
((Also, use quotes consistently. I am happy to see unquoted instances
like "rm -rf $TEST_DIR/..." go.))
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-16-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Use _make_test_img whenever possible. This way, we will not ignore
user-specified image options.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-15-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Overwriting IMGOPTS means ignoring all user-supplied options, which is
not what we want. Replace the current IMGOPTS use by a new BACKING_FILE
variable.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-14-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tests should not overwrite all user-supplied image options, but only add
to it (which will effectively overwrite conflicting values). Accomplish
this by passing options to _make_test_img via -o instead of $IMGOPTS.
For some tests, there is no functional change because they already only
appended options to IMGOPTS. For these, this patch is just a
simplification.
For others, this is a change, so they now heed user-specified $IMGOPTS.
Some of those tests do not work with all image options, though, so we
need to disable them accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-12-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
It did not matter before, but now that _make_test_img understands -o, we
should use it properly here.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Blindly overriding IMGOPTS is suboptimal as this discards user-specified
options. Whatever options the test needs should simply be appended.
Some tests do this (with IMGOPTS=$(_optstr_add "$IMGOPTS" "...")), but
that is cumbersome. It’s simpler to just give _make_test_img an -o
parameter with which tests can add options.
Some tests actually must override the user-specified options, though,
for example when creating an image in a different format than the test
$IMGFMT. For such cases, --no-opts allows clearing the current option
list.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will allow us to add more options than just -b.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-9-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
IMGOPTS can never be empty for qcow2, because the check scripts adds
compat=1.1 unless the user specified any compat option themselves.
Thus, this block does not do anything and can be dropped.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some tests require compat=1.1 and thus set IMGOPTS='compat=1.1'
globally. That is not how it should be done; instead, they should
simply set _unsupported_imgopts to compat=0.10 (compat=1.1 is the
default anyway).
This makes the tests heed user-specified $IMGOPTS. Some do not work
with all image options, though, so we need to disable them accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsky@redhat.com>
Message-id: 20191107163708.833192-7-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This test can run just fine with other values for refcount_bits, so we
should filter the value from qcow2.py's dump-header. In fact, we can
filter everything but the feature bits and header extensions, because
that is what the test is about.
(036 currently ignores user-specified image options, but that will be
fixed in the next patch.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Print the feature fields as a set of bits so that filtering is easier.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is useful for tests that want to whitelist fields from dump-header
(with grep) but still print all header extensions.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Probably due to blind copy-pasting, we have several instances of "qocw2"
in our iotests. Fix them.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191107163708.833192-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
qcow2_can_store_new_dirty_bitmap works wrong, as it considers only
bitmaps already stored in the qcow2 image and ignores persistent
BdrvDirtyBitmap objects.
So, let's instead count persistent BdrvDirtyBitmaps. We load all qcow2
bitmaps on open, so there should not be any bitmap in the image for
which we don't have BdrvDirtyBitmaps version. If it is - it's a kind of
corruption, and no reason to check for corruptions here (open() and
close() are better places for it).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191014115126.15360-2-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
This avoid a memory leak when qom-set is called to set throttle_group
limits, here is an easy way to reproduce:
1. run qemu-iotests as follow and check the result with asan:
./check -qcow2 184
Following is the asan output backtrack:
Direct leak of 912 byte(s) in 3 object(s) allocated from:
#0 0xffff8d7ab3c3 in __interceptor_calloc (/lib64/libasan.so.4+0xd33c3)
#1 0xffff8d4c31cb in g_malloc0 (/lib64/libglib-2.0.so.0+0x571cb)
#2 0x190c857 in qobject_input_start_struct /mnt/sdc/qemu-master/qemu-4.2.0-rc0/qapi/qobject-input-visitor.c:295
#3 0x19070df in visit_start_struct /mnt/sdc/qemu-master/qemu-4.2.0-rc0/qapi/qapi-visit-core.c:49
#4 0x1948b87 in visit_type_ThrottleLimits qapi/qapi-visit-block-core.c:3759
#5 0x17e4aa3 in throttle_group_set_limits /mnt/sdc/qemu-master/qemu-4.2.0-rc0/block/throttle-groups.c:900
#6 0x1650eff in object_property_set /mnt/sdc/qemu-master/qemu-4.2.0-rc0/qom/object.c:1272
#7 0x1658517 in object_property_set_qobject /mnt/sdc/qemu-master/qemu-4.2.0-rc0/qom/qom-qobject.c:26
#8 0x15880bb in qmp_qom_set /mnt/sdc/qemu-master/qemu-4.2.0-rc0/qom/qom-qmp-cmds.c:74
#9 0x157e3e3 in qmp_marshal_qom_set qapi/qapi-commands-qom.c:154
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: PanNengyuan <pannengyuan@huawei.com>
Message-id: 1574835614-42028-1-git-send-email-pannengyuan@huawei.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20191108123455.39445-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Callers can use this new parameter to expect failure during the
completion process.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191108123455.39445-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Sometimes it is useful to be able to add a node to the block graph that
takes or unshare a certain set of permissions for debugging purposes.
This patch adds this capability to blkdebug.
(Note that you cannot make blkdebug release or share permissions that it
needs to take or cannot share, because this might result in assertion
failures in the block layer. But if the blkdebug node has no parents,
it will not take any permissions and share everything by default, so you
can then freely choose what permissions to take and share.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191108123455.39445-4-mreitz@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We can save some LoC in xdbg_graph_add_edge() by using
bdrv_qapi_perm_to_blk_perm().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191108123455.39445-3-mreitz@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We need some way to correlate QAPI BlockPermission values with
BLK_PERM_* flags. We could:
(1) have the same order in the QAPI definition as the the BLK_PERM_*
flags are in LSb-first order. However, then there is no guarantee
that they actually match (e.g. when someone modifies the QAPI schema
without thinking of the BLK_PERM_* definitions).
We could add static assertions, but these would break what’s good
about this solution, namely its simplicity.
(2) define the BLK_PERM_* flags based on the BlockPermission values.
But this way whenever someone were to modify the QAPI order
(perfectly sensible in theory), the BLK_PERM_* values would change.
Because these values are used for file locking, this might break
file locking between different qemu versions.
Therefore, go the slightly more cumbersome way: Add a function to
translate from the QAPI constants to the BLK_PERM_* flags.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191108123455.39445-2-mreitz@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tell the compiler to do a 32bit * 32bit -> 64bit multiplication
because period_ticks is a 64bit variable. The overflow occurs
for audio timer periods larger than 4294967us.
Fixes: be1092afa0 "audio: fix audio timer rate conversion bug"
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 8893a235-66a8-8fbe-7d95-862e29da90b1@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Don't call pa_stream_peek before the recording stream is ready.
Information to reproduce the problem.
Start and stop Audacity in the guest several times because the
problem is racy.
libvirt log file:
-audiodev pa,id=audio0,server=localhost,out.latency=30000,
out.mixing-engine=off,in.mixing-engine=off \
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,
resourcecontrol=deny \
-msg timestamp=on
: Domain id=4 is tainted: custom-argv
char device redirected to /dev/pts/1 (label charserial0)
audio: Device pcspk: audiodev default parameter is deprecated,
please specify audiodev=audio0
audio: Device hda: audiodev default parameter is deprecated,
please specify audiodev=audio0
pulseaudio: pa_stream_peek failed
pulseaudio: Reason: Bad state
pulseaudio: pa_stream_peek failed
pulseaudio: Reason: Bad state
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200104091122.13971-5-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is no guarantee a single call to pa_stream_peek every
timer_period microseconds can read a recording stream faster
than the data gets produced at the source. Let qpa_read try to
drain the recording stream.
To reproduce the problem:
Start qemu with -audiodev pa,id=audio0,in.mixing-engine=off
On the host connect the qemu recording stream to the monitor of
a hardware output device. While the problem can also be seen
with a hardware input device, it's obvious with the monitor of
a hardware output device.
In the guest start audio recording with audacity and notice the
slow recording data rate.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200104091122.13971-4-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Every call to pa_stream_peek which returns a data length > 0
should have a corresponding pa_stream_drop. A call to qpa_read
does not necessarily call pa_stream_drop immediately after a
call to pa_stream_peek. Test in qpa_fini_in if a last
pa_stream_drop is needed.
This prevents following messages in the libvirt log file after
a recording stream gets closed and a new one opened.
pulseaudio: pa_stream_drop failed
pulseaudio: Reason: Bad state
pulseaudio: pa_stream_drop failed
pulseaudio: Reason: Bad state
To reproduce start qemu with
-audiodev pa,id=audio0,in.mixing-engine=off
and in the guest start and stop Audacity several times.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200104091122.13971-3-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Apply previous commit to hda_audio_input_cb for the same
reasons.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200104091122.13971-2-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since commit 1930616b98 "audio: make mixeng optional" the
function hda_audio_output_cb can no longer assume the function
parameter avail contains the free buffer size. With the playback
mixing-engine turned off this leads to a broken playback rate
control and playback buffer drops in regular intervals.
This patch moves down the rate calculation, so the correct
buffer fill level is used for the calculation.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200104091122.13971-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
5.0 machine type uses 4.2 compats. This seems to be incorrect, since
the latests machine type by now is 5.0 and it should use its own
compat or shouldn't use any relying on the defaults.
Seems, like this appeared because of some problems on merge/rebase.
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-Id: <20191223072856.5369-1-dplotnikov@virtuozzo.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the vhost-user-scsi backend supports the VHOST_USER_F_RESET_DEVICE
protocol feature, then the device can be reset when requested.
If this feature is not supported, do not try a reset as this will send
a VHOST_USER_RESET_OWNER that the backend is not expecting,
potentially putting into an inoperable state.
Signed-off-by: David Vrabel <david.vrabel@nutanix.com>
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <1572385083-5254-3-git-send-email-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a VHOST_USER_RESET_DEVICE message which will reset the vhost user
backend. Disabling all rings, and resetting all internal state, ready
for the backend to be reinitialized.
A backend has to report it supports this features with the
VHOST_USER_PROTOCOL_F_RESET_DEVICE protocol feature bit. If it does
so, the new message is used instead of sending a RESET_OWNER which has
had inconsistent implementations.
Signed-off-by: David Vrabel <david.vrabel@nutanix.com>
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <1572385083-5254-2-git-send-email-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Both functions are called by MemoryRegionOps.[read/write] handlers
with unsigned 'size' argument. Both functions call
pci_host_config_[read/write]_common() which expect a uint32_t 'len'
parameter (also unsigned).
Since it is pointless (and confuse) to use a signed value, use a
unsigned type.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191216002134.18279-3-philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In commit 3bf4dfdd11 we introduced the pci_cfg_[read/write]
trace events in pci_host_config_[read/write]_common().
We have the following call trace:
pci_host_data_[read/write]()
- PCI_DPRINTF()
- pci_data_[read/write]()
- PCI_DPRINTF()
- pci_host_config_[read/write]_common()
trace_pci_cfg_[read/write]()
Since the PCI_DPRINTF() calls are redundant with the trace
events, remove them.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191216002134.18279-2-philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
