To be used to decode ARM SVE, but could be used for any fixed-width ISA.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The ref405ep machine has a memory-mapped m48t59 device, so
we can run the m48t59 test on this machine, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
The m48t59 test has been disabled in commit baeddded5f
("sparc: disable qtest in make check"), likely due to some timing issues
in the bcd_check_time tests which might fail if it gets interrupted for
too long. It should be OK to re-enable this test if we make sure that we
do not run it on timing-sensitive machines, thus it should be OK if we only
run it in the g_test_slow() mode.
Additionally, there are two other issues:
First, the test can not run so easily on sparc64 anymore, since commit
f3b18f35a2 ("sun4u: switch m48t59 NVRAM to MMIO access")
moved the m48t59 device to the ebus instead, and for this you first
have to set up the corresponding PCI device (which is currently not
possible from within the m48t59 test). So we can only re-enable this
test on sparc, but not the sparc64 target.
Second, the fuzzing test is executed before the bcd-check-time test
(due to the naming of the tests), without having the base address set
up properly, so the fuzzing test does not really check anything at all.
Fix it by setting up the base address from the main function already
and by moving the qtest_start() to the tests themselves, so that each
test starts with a clean environment (since after the fuzzing, the clock
is unusable for the bcd-check-time test).
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch adds a small binary kernel to test aarch64 virt machine's
UART.
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[thuth: Fixed contextual conflicts with the hppa and sdhci patches]
Signed-off-by: Thomas Huth <thuth@redhat.com>
OpenBIOS prints out the name of the detected CPU here, so looking for
this string is a nice test to verify that the CPU detection is still
working correctly.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <20180208164818.7961-29-f4bug@amsat.org>
The PCI model is tested with the pc/x86_64 machine,
the SysBus model with the smdkc210/arm machine.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180208164818.7961-3-f4bug@amsat.org>
-----BEGIN PGP SIGNATURE-----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=wKYf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/python-next-pull-request' into staging
Python queue, 2018-02-05
# gpg: Signature made Mon 05 Feb 2018 23:07:57 GMT
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/python-next-pull-request: (21 commits)
docker: change Fedora images to run with python3
travis: improve python version test coverage
ui: update keycodemapdb to get py3 fixes
input: add missing JIS keys to virtio input
qemu.py: don't launch again before shutdown()
qemu.py: cleanup redundant calls in launch()
qemu.py: use poll() instead of 'returncode'
qemu.py: always cleanup on shutdown()
qemu.py: refactor launch()
qemu.py: better control of created files
qemu.py: remove unused import
configure: allow use of python 3
scripts: ensure signrom treats data as bytes
qapi: force a UTF-8 locale for running Python
qapi: ensure stable sort ordering when checking QAPI entities
qapi: remove '-q' arg to diff when comparing QAPI output
qapi: Adapt to moved location of 'maketrans' function in py3
qapi: adapt to moved location of StringIO module in py3
qapi: Use OrderedDict from standard library if available
qapi: use items()/values() intead of iteritems()/itervalues()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When the qapi schema tests fail they merely print that the expected
output didn't match the actual output. This is largely useless when
trying diagnose what went wrong. Removing the '-q' arg to diff
means that it is still silent on successful tests, but when it
fails we'll see details of the incorrect output.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20180116134217.8725-7-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
tpm_crb is a device for TPM 2.0 Command Response Buffer (CRB)
Interface as defined in TCG PC Client Platform TPM Profile (PTP)
Specification Family “2.0” Level 00 Revision 01.03 v22.
The PTP allows device implementation to switch between TIS and CRB
model at run time, but given that CRB is a simpler device to
implement, I chose to implement it as a different device.
The device doesn't implement other locality than 0 for now (my laptop
TPM doesn't either, so I assume this isn't so bad)
Tested with some success with Linux upstream and Windows 10, seabios &
modified ovmf. The device is recognized and correctly transmit
command/response with passthrough & emu. However, we are missing PPI
ACPI part atm.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
CPU hot-plugging on s390x is possible with both, "cpu-add"
and "device_add", so test both.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Hot plugging on ppc64 is possible via "device_add", too. Unlike x86,
we must not specify a 'socket-id' and 'thread-id' here, so this needs
to be done with a separate function that just specifies the 'core-id'
during the "device_add".
Reviewed-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The test will be extended to work on other architectures, too, so let's
use a more generic name for the file and the functions in here first.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The raspi2 machine supports loading firmware images, so we can easily
load a small test sequence as raw binary blob here to test the UART.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1512031988-32490-8-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that moxiesim supports the -bios parameter, we can check this machine
in the boot-serial tester, too, by supplying a mini bios that only writes
'T' characters to the UART.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1512031988-32490-7-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds two simple TCG + UART tests for the microblaze boards,
one in big endian mode, and one in little endian mode.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1512031988-32490-5-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds a test case that the BlockDriver callbacks for drain are
called in bdrv_drained_all_begin/end(), and that both of them are called
exactly once.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We can output a character quite easily here with some few lines of
assembly that we provide as a mini-kernel for this board.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1512031988-32490-4-git-send-email-thuth@redhat.com>
[lv: add boot-serial-test in check-qtest-m68k]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
A negative test case crept into doc-good.json: invalid use of section
markup we currently fail to reject. Move this into its own
doc-bad-section.json.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002141341.24616-6-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
For some systems (i.e. FreeBSD) the default 'make' is not compatible with the
GNU extensions used by QEMU makefiles.
Calling the GNU make (gmake) works, however the help displayed refers to the
host 'make' and copy/paste leads to lot of unobvious errors:
$ gmake check-help
[...]
make check Run all tests
$ make check
make: "Makefile" line 28: Missing dependency operator
make: "Makefile" line 37: Need an operator
make: "Makefile" line 41: warning: duplicate script for target "git-submodule-update" ignored
make: "rules.mak" line 70: warning: duplicate script for target "%.o" ignored
make: Unknown modifier ' '
make: Unclosed substitution for eval modules (= missing)
make: "tests/Makefile.include" line 24: Variable/Value missing from "export"
make: "tests/" line 1: warning: Zero byte read from file, skipping rest of line.
make: "tests/" line 1: Need an operator
make: "Makefile" line 660: warning: duplicate script for target "ifneq" ignored
make: "Makefile" line 78: warning: using previous script for "ifneq" defined here
make: Fatal errors encountered -- cannot continue
Using the $(MAKE) variable, the help displayed is consistent with the 'make'
program used.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add a new test file (check-qobject.c) for unit tests that concern
QObjects as a whole.
Its only purpose for now is to test the qobject_is_equal() function.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171114180128.17076-7-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Instead of repeating the code, we are going to bo more tests on this file
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
These tests can easily be used on s390x, too. We just have to make
sure to use the virtio-xxx-ccw devices instead of virtio-xxx-pci.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1508336428-20511-3-git-send-email-thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
And actually link to it from vhost-user-bridge.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We can use the drive_del test on s390x, too, to check that adding and
deleting also works fine with the virtio-ccw bus. But we have to make
sure that we use the devices with the "-ccw" suffix instead of the
"-pci" suffix for the virtio-ccw transport on s390x. Introduce a helper
function called qvirtio_get_dev_type() that returns the correct string
for the current architecture.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1504190408-11143-1-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Convert any remaining uses of fprintf(stderr, "warning:"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using this command:
find ./* -type f -exec sed -i 's|fprintf(.*".*warning[,:] |warn_report("|Ig' {} +
The #include lines and chagnes to the test Makefile were manually
updated to allow the code to compile.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <2c94ac3bb116cc6b8ebbcd66a254920a69665515.1503077821.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using two libraries (libqemuutil.a and libqemustub.a) would sometimes
result in circular dependencies. To avoid these issues let's just
combine both into a single library that functions as both.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <54e6458745493d10901964624479a7d9a872f481.1503077821.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This test provides its own mocks, so do not use the "standard"
stubs in libqemustub.a or the event loop implementation in
libqemuutil.a.
This is required on OS X, which otherwise brings in qemu-timer.o,
async.o and main-loop.o from libqemuutil.a.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The conflict check added by commit c0644771 ("qapi: Reject
alternates that can't work with keyval_parse()") doesn't work
with the following declaration:
{ 'alternate': 'Alt',
'data': { 'one': 'bool',
'two': 'str' } }
It crashes with:
Traceback (most recent call last):
File "./scripts/qapi-types.py", line 295, in <module>
schema = QAPISchema(input_file)
File "/home/ehabkost/rh/proj/virt/qemu/scripts/qapi.py", line 1468, in __init__
self.exprs = check_exprs(parser.exprs)
File "/home/ehabkost/rh/proj/virt/qemu/scripts/qapi.py", line 958, in check_exprs
check_alternate(expr, info)
File "/home/ehabkost/rh/proj/virt/qemu/scripts/qapi.py", line 830, in check_alternate
% (name, key, types_seen[qtype]))
KeyError: 'QTYPE_QSTRING'
This happens because the previously-seen conflicting member
('one') can't be found at types_seen[qtype], but at
types_seen['QTYPE_BOOL'].
Fix the bug by moving the error check to the same loop that adds
new items to types_seen, raising an exception if types_seen[qt]
is already set.
Add two additional test cases that can detect the bug.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170717180926.14924-1-ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
With some small modifications, we can also use the the netfilter,
the filter-mirror and the filter-redirector tests on s390x.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1502951113-4246-3-git-send-email-thuth@redhat.com>
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This way we can get rid of the ugly #ifdefs in the code which makes
it easier to extend later.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1502951113-4246-2-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now that we've got a firmware that can do TFTP booting on s390x (i.e.
the pc-bios/s390-netboot.img), we can enable the PXE tester for this
architecture, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1502431076-22849-3-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Currently if you do "make check-help" in a fresh checkout, only an error
is printed which is not nice:
$ make check-help V=1
cc -nostdlib -o check-help.mo
cc: fatal error: no input files
compilation terminated.
rules.mak:115: recipe for target 'check-help.mo' failed
make: *** [check-help.mo] Error 1
Move the config-host.mak condition into the body of
tests/Makefile.include and always include the rule for check-help.
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170810085025.14076-1-famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Learn to compile out vhost-user (net, scsi & upcoming users). Keep it
enabled by default on non-win32, that is assumed to be POSIX. Fail if
trying to enable it on win32.
When trying to make a vhost-user netdev, it gives the following error:
-netdev vhost-user,id=foo,chardev=chr-test: Parameter 'type' expects a netdev backend type
And similar error with the HMP/QMP monitors.
While at it, rename CONFIG_VHOST_NET_TEST CONFIG_VHOST_USER_NET_TEST
since it's a vhost-user specific variable.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allow a one liner from fresh repository clone, i.e.:
./configure && make -j check-qtest-aarch64
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If slirp is disabled, it will fail with:
qemu-system-x86_64: -netdev user,id=qtest-bn0: Parameter 'type' expects a netdev backend type
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In various places in our test makefiles and scripts we use the
shell $RANDOM to create a random number. This is a bash
specific extension, and doesn't work on other shells.
With dash the shell doesn't complain, it just effectively
always evaluates $RANDOM to 0:
echo $((RANDOM + 32768)) => 32768
However, on NetBSD the shell will complain:
"-sh: arith: syntax error: "RANDOM + 32768"
which means that "make check" fails.
Switch to using "${RANDOM:-0}" instead of $RANDOM,
which will portably either give us a random number or zero.
This means that on non-bash shells we don't get such
good test coverage via the MALLOC_PERTURB_ setting, but
we were already in that situation for non-bash shells.
Our only other uses of $RANDOM (in tests/qemu-iotests/check
and tests/qemu-iotests/162) are in shell scripts which use
a #!/bin/bash line so they are always run under bash.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1500029117-6387-1-git-send-email-peter.maydell@linaro.org
Rather than relying on everywhere that cares about whether the host
supports ivshmem using CONFIG_EVENTFD, make configure set an explicit
CONFIG_IVSHMEM.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500021225-4118-3-git-send-email-peter.maydell@linaro.org
[PMM: split out from another patch, add commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch add a hmac speed benchmark, it helps us to
measure the performance by using "make check-speed" or
using "./tests/benchmark-crypto-hmac" directly.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch add a hash speed benchmark, it helps us to
measure the performance by using "make check-speed" or
using "./tests/benchmark-crypto-hash" directly.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Now we have two qcrypto backends, libiary-backend and afalg-backend,
but which one is faster? This patch add a cipher speed benchmark, it
helps us to measure the performance by using "make check-speed" or
using "./tests/benchmark-crypto-cipher" directly.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There's no requirement for RSDP to be installed last
by the firmware, so in rare cases vmgen id test hits
a race: RSDP is there but VM GEN ID isn't.
To fix, switch to common boot sector infrastructure.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Ben Warren <ben@skyportsystems.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ben Warren <ben@skyportsystems.com>
Message-id: 1500046217-24597-1-git-send-email-mst@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The following tests are implemented:
* test that a GUID passed in by command line is propagated to the guest.
Read the GUID from guest memory
* test that the "auto" argument to the GUID generates a valid GUID, as
seen by the guest.
* test that a GUID passed in can be queried from the monitor
This patch is loosely based on a previous patch from:
Gal Hammer <ghammer@redhat.com> and Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Ben Warren <ben@skyportsystems.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----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=O9Vv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-06-09-v2' into staging
QAPI patches for 2017-06-09
# gpg: Signature made Tue 20 Jun 2017 13:31:39 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2017-06-09-v2: (41 commits)
tests/qdict: check more get_try_int() cases
console: use get_uint() for "head" property
i386/cpu: use get_uint() for "min-level"/"min-xlevel" properties
numa: use get_uint() for "size" property
pnv-core: use get_uint() for "core-pir" property
pvpanic: use get_uint() for "ioport" property
auxbus: use get_uint() for "addr" property
arm: use get_uint() for "mp-affinity" property
xen: use get_uint() for "max-ram-below-4g" property
pc: use get_uint() for "hpet-intcap" property
pc: use get_uint() for "apic-id" property
pc: use get_uint() for "iobase" property
acpi: use get_uint() for "pci-hole*" properties
acpi: use get_uint() for various acpi properties
acpi: use get_uint() for "acpi-pcihp-io*" properties
platform-bus: use get_uint() for "addr" property
bcm2835_fb: use {get, set}_uint() for "vcram-size" and "vcram-base"
aspeed: use {set, get}_uint() for "ram-size" property
pcihp: use get_uint() for "bsel" property
pc-dimm: make "size" property uint64
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We would like to use a same QObject type to represent numbers, whether
they are int, uint, or floats. Getters will allow some compatibility
between the various types if the number fits other representations.
Add a few more tests while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[parse_stats_intervals() simplified a bit, comment in
test_visitor_in_int_overflow() tidied up, suppress bogus warnings]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
