Coverity complains that the check introduced in commit 3f934817 suggests
that qiov could be NULL and we dereference it before reaching the check.
In fact, all of the callers pass a non-NULL pointer, so just remove the
misleading check.
Resolves: Coverity CID 1542668
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20240327192750.204197-1-kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Same rationale as for commit "block-backend: fix edge case in
bdrv_next() where BDS associated to BB changes". The block graph might
change between the bdrv_next() call and the bdrv_next_cleanup() call,
so it could be that the associated BDS is not the same that was
referenced previously anymore. Instead, rely on bdrv_next() to set
it->bs to the BDS it referenced and unreference that one in any case.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20240322095009.346989-4-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some operations, e.g. block-stream, perform reads while discarding the
results (only copy-on-read matters). In this case, they will pass NULL
as the target QEMUIOVector, which will however trip bdrv_pad_request,
since it wants to extend its passed vector. In particular, this is the
case for the blk_co_preadv() call in stream_populate().
If there is no qiov, no operation can be done with it, but the bytes
and offset still need to be updated, so the subsequent aligned read
will actually be aligned and not run into an assertion failure.
In particular, this can happen when the request alignment of the top
node is larger than the allocated part of the bottom node, in which
case padding becomes necessary. For example:
> ./qemu-img create /tmp/backing.qcow2 -f qcow2 64M -o cluster_size=32768
> ./qemu-io -c "write -P42 0x0 0x1" /tmp/backing.qcow2
> ./qemu-img create /tmp/top.qcow2 -f qcow2 64M -b /tmp/backing.qcow2 -F qcow2
> ./qemu-system-x86_64 --qmp stdio \
> --blockdev qcow2,node-name=node0,file.driver=file,file.filename=/tmp/top.qcow2 \
> <<EOF
> {"execute": "qmp_capabilities"}
> {"execute": "blockdev-add", "arguments": { "driver": "compress", "file": "node0", "node-name": "node1" } }
> {"execute": "block-stream", "arguments": { "job-id": "stream0", "device": "node1" } }
> EOF
Originally-by: Stefan Reiter <s.reiter@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
[FE: do update bytes and offset in any case
add reproducer to commit message]
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20240322095009.346989-2-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When running the command `qemu-img snapshot -l SNAPSHOT` the output of
VM_CLOCK (measures the offset between host and VM clock) cannot to
accommodate values in the order of thousands (4-digit).
This line [1] hints on the problem. Additionally, the column width for
the VM_CLOCK field was reduced from 15 to 13 spaces in commit b39847a5
in line [2], resulting in a shortage of space.
[1]:
https://gitlab.com/qemu-project/qemu/-/blob/master/block/qapi.c?ref_type=heads#L753
[2]:
https://gitlab.com/qemu-project/qemu/-/blob/master/block/qapi.c?ref_type=heads#L763
This patch restores the column width to 15 spaces and makes adjustments
to the affected iotests accordingly. Furthermore, addresses a potential
source
of confusion by removing whitespace in column headers. Example, VM CLOCK
is modified to VM_CLOCK. Additionally a '--' symbol is introduced when
ICOUNT returns no output for clarity.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2062
Fixes: b39847a505 ("migration: introduce icount field for snapshots")
Signed-off-by: Abhiram Tilak <atp.exp@gmail.com>
Message-ID: <20240123050354.22152-2-atp.exp@gmail.com>
[kwolf: Fixed up qemu-iotests 261 and 286]
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Calling job_pause_point() while holding the graph reader lock
potentially results in a deadlock: bdrv_graph_wrlock() first drains
everything, including the mirror job, which pauses it. The job is only
unpaused at the end of the drain section, which is when the graph writer
lock has been successfully taken. However, if the job happens to be
paused at a pause point where it still holds the reader lock, the writer
lock can't be taken as long as the job is still paused.
Mark job_pause_point() as GRAPH_UNLOCKED and fix mirror accordingly.
Cc: qemu-stable@nongnu.org
Buglink: https://issues.redhat.com/browse/RHEL-28125
Fixes: 004915a96a ("block: Protect bs->backing with graph_lock")
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240313153000.33121-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since the commit 05e385d2a9 ("error: Move ERRP_GUARD() to the beginning
of the function"), there are new codes that don't put ERRP_GUARD() at
the beginning of the functions.
As stated in the commit 05e385d2a9: "include/qapi/error.h advises to put
ERRP_GUARD() right at the beginning of the function, because only then
can it guard the whole function.", so clean up the few spots
disregarding the advice.
Inspired-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240312060337.3240965-1-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The vmdk_parse_extents() passes @errp to error_prepend(), and its @errp
is from vmdk_open().
Though, vmdk_open(), as a BlockDriver.bdrv_open(), gets the @errp
parameter which is pointer of its caller's local_err, to follow the
requirement of @errp, add missing ERRP_GUARD() at the beginning of this
function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Fam Zheng <fam@euphon.net>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-13-zhao1.liu@linux.intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The vdi_co_do_create() passes @errp to error_prepend() without
ERRP_GUARD(), and its @errp parameter is so widely sourced that it is
necessary to protect it with ERRP_GUARD().
To avoid the potential issues as [1] said, add missing ERRP_GUARD() at
the beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Stefan Weil <sw@weilnetz.de>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-12-zhao1.liu@linux.intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
In block/snapshot.c, there are 2 functions passing @errp to
error_prepend() without ERRP_GUARD():
- bdrv_all_delete_snapshot()
- bdrv_all_goto_snapshot()
As the APIs exposed in include/block/snapshot.h, they could be called
by other modules.
To avoid potential issues as [1] said, add missing ERRP_GUARD() at the
beginning of these 2 functions.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-11-zhao1.liu@linux.intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The bdrv_qed_co_invalidate_cache() passes @errp to error_prepend()
without ERRP_GUARD().
Though it is a BlockDriver.bdrv_co_invalidate_cache() method, and
currently its @errp parameter only points to callers' local_err, to
follow the requirement of @errp, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240311033822.3142585-10-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
In block/qcow2.c, there are 2 functions passing @errp to error_prepend()
without ERRP_GUARD():
- qcow2_co_create()
- qcow2_co_truncate()
There are too many possible callers to check the impact of the defect;
it may or may not be harmless. Thus it is necessary to protect @errp with
ERRP_GUARD().
Therefore, to avoid the issue like [1] said, add missing ERRP_GUARD() at
their beginning.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240311033822.3142585-9-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The qcow2_co_can_store_new_dirty_bitmap() passes @errp to
error_prepend(). As a BlockDriver.bdrv_co_can_store_new_dirty_bitmap
method, it's called by bdrv_co_can_store_new_dirty_bitmap().
Its caller is not being called anywhere, but as the API in
include/block/block-io.h, we can't ensure what kind of @errp future
users will pass in.
To avoid potential issues as [1] said, add missing ERRP_GUARD() at the
beginning of qcow2_co_can_store_new_dirty_bitmap().
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Cc: John Snow <jsnow@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20240311033822.3142585-8-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
In nvme.c, there are 3 functions passing @errp to error_prepend()
without ERRP_GUARD():
- nvme_init_queue()
- nvme_create_queue_pair()
- nvme_identify()
All these 3 functions take their @errp parameters from the
nvme_file_open(), which is a BlockDriver.bdrv_nvme() method and its
@errp points to its caller's local_err.
Though these 3 cases haven't trigger the issue like [1] said, to
follow the requirement of @errp, add missing ERRP_GUARD() at their
beginning.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Fam Zheng <fam@euphon.net>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240311033822.3142585-7-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The nbd_co_do_receive_one_chunk() passes @errp to error_prepend()
without ERRP_GUARD(), and though its @errp parameter points to its
caller's local_err, to follow the requirement of @errp, add missing
ERRP_GUARD() at the beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Eric Blake <eblake@redhat.com>
Cc: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20240311033822.3142585-6-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The cbw_open() passes @errp to error_prepend() without ERRP_GUARD().
Though it is the BlockDriver.bdrv_open() method, and currently its
@errp parameter only points to callers' local_err, to follow the
requirement of @errp, add missing ERRP_GUARD() at the beginning of this
function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: John Snow <jsnow@redhat.com>
Cc: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20240311033822.3142585-5-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- Update x86 CPU model docs and script
- Add missing close of chardev QIOChannel
- More trace events o nTKS handshake
- Drop unsafe VNC constants
- Increase NOFILE limit during startup
-----BEGIN PGP SIGNATURE-----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=61zI
-----END PGP SIGNATURE-----
Merge tag 'misc-fixes-pull-request' of https://gitlab.com/berrange/qemu into staging
- LUKS support for detached headers
- Update x86 CPU model docs and script
- Add missing close of chardev QIOChannel
- More trace events o nTKS handshake
- Drop unsafe VNC constants
- Increase NOFILE limit during startup
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2vOm/bJrYpEtDo4/vobrtBUQT98FAmXGMNUACgkQvobrtBUQ
# T998JQ//SqQ3L/AZmhE5cIwZ1XipSMMZ/yEoVIyniA3tL41S7Oimj3O9XvY68TEG
# nnj9Oh+zOlVLxauTHAczveJ7z+XfonQZS3HrbGRUTHU+ezGVjyM618e/h9pSQtYI
# +CCkrjtey1NoT42/um4D/bKg/B2XQeulS+pD12Z9l5zbqEZiw0R9+UwVIJ52G811
# 5UQgIjJ7GNFzalxqiMCkGc0nTyU8keEXQJcdZ4droo42DnU4pZeQWGDimzP61JnW
# 1Crm6aZSuUriUbVmxJde+2eEdPSR4rr/yQ4Pw06hoi1QJALSgGYtOTo8+qsyumHd
# us/2ouMrxOMdsIk4ViAkSTiaje9agPj84VE1Z229Y/uqZcEAuX572n730/kkzqUv
# ZDKxMz0v3rzpkjFmsgj5D4yqJaQp4zn1zYm98ld7HWJVIOf3GSvpaNg9J6jwN7Gi
# HKKkvYns9pxg3OSx++gqnM32HV6nnMDFiddipl/hTiUsnNlnWyTDSvJoNxIUU5+l
# /uEbbdt8xnxx1JP0LiOhgmz6N6FU7oOpaPuJ5CD8xO2RO8D1uBRvmpFcdOTDAfv0
# uYdjhKBI+quKjE64p7gNWYCoqZtipRIJ6AY2VaPU8XHx8GvGFwBLX64oLYiYtrBG
# gkv3NTHRkMhQw9cGQcZIgZ+OLU+1eNF+m9EV7LUjuKl0HWC3Vjs=
# =61zI
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 09 Feb 2024 14:04:05 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* tag 'misc-fixes-pull-request' of https://gitlab.com/berrange/qemu:
tests: Add case for LUKS volume with detached header
crypto: Introduce 'detached-header' field in QCryptoBlockInfoLUKS
block: Support detached LUKS header creation using qemu-img
block: Support detached LUKS header creation using blockdev-create
crypto: Modify the qcrypto_block_create to support creation flags
qapi: Make parameter 'file' optional for BlockdevCreateOptionsLUKS
crypto: Support LUKS volume with detached header
io: add trace event when cancelling TLS handshake
chardev: close QIOChannel before unref'ing
docs: re-generate x86_64 ABI compatibility CSV
docs: fix highlighting of CPU ABI header rows
scripts: drop comment about autogenerated CPU API file
softmmu: remove obsolete comment about libvirt timeouts
ui: drop VNC feature _MASK constants
qemu_init: increase NOFILE soft limit on POSIX
crypto: Introduce SM4 symmetric cipher algorithm
meson: sort C warning flags alphabetically
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Even though a LUKS header might be created with cryptsetup,
qemu-img should be enhanced to accommodate it as well.
Add the 'detached-header' option to specify the creation of
a detached LUKS header. This is how it is used:
$ qemu-img create --object secret,id=sec0,data=abc123 -f luks
> -o cipher-alg=aes-256,cipher-mode=xts -o key-secret=sec0
> -o detached-header=true header.luks
Using qemu-img or cryptsetup tools to query information of
an LUKS header image as follows:
Assume a detached LUKS header image has been created by:
$ dd if=/dev/zero of=test-header.img bs=1M count=32
$ dd if=/dev/zero of=test-payload.img bs=1M count=1000
$ cryptsetup luksFormat --header test-header.img test-payload.img
> --force-password --type luks1
Header image information could be queried using cryptsetup:
$ cryptsetup luksDump test-header.img
or qemu-img:
$ qemu-img info 'json:{"driver":"luks","file":{"filename":
> "test-payload.img"},"header":{"filename":"test-header.img"}}'
When using qemu-img, keep in mind that the entire disk
information specified by the JSON-format string above must be
supplied on the commandline; if not, an overlay check will reveal
a problem with the LUKS volume check logic.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[changed to pass 'cflags' to block_crypto_co_create_generic]
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, enable the ability to choose the block device containing
a detachable LUKS header by adding the 'header' parameter to
BlockdevCreateOptionsLUKS.
Secondly, when formatting the LUKS volume with a detachable header,
truncate the payload volume to length without a header size.
Using the qmp blockdev command, create the LUKS volume with a
detachable header as follows:
1. add the secret to lock/unlock the cipher stored in the
detached LUKS header
$ virsh qemu-monitor-command vm '{"execute":"object-add",
> "arguments":{"qom-type": "secret", "id": "sec0", "data": "foo"}}'
2. create a header img with 0 size
$ virsh qemu-monitor-command vm '{"execute":"blockdev-create",
> "arguments":{"job-id":"job0", "options":{"driver":"file",
> "filename":"/path/to/detached_luks_header.img", "size":0 }}}'
3. add protocol blockdev node for header
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments": {"driver":"file", "filename":
> "/path/to/detached_luks_header.img", "node-name":
> "detached-luks-header-storage"}}'
4. create a payload img with 0 size
$ virsh qemu-monitor-command vm '{"execute":"blockdev-create",
> "arguments":{"job-id":"job1", "options":{"driver":"file",
> "filename":"/path/to/detached_luks_payload_raw.img", "size":0}}}'
5. add protocol blockdev node for payload
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments": {"driver":"file", "filename":
> "/path/to/detached_luks_payload_raw.img", "node-name":
> "luks-payload-raw-storage"}}'
6. do the formatting with 128M size
$ virsh qemu-monitor-command c81_node1 '{"execute":"blockdev-create",
> "arguments":{"job-id":"job2", "options":{"driver":"luks", "header":
> "detached-luks-header-storage", "file":"luks-payload-raw-storage",
> "size":134217728, "preallocation":"full", "key-secret":"sec0" }}}'
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Expand the signature of qcrypto_block_create to enable the
formation of LUKS volumes with detachable headers. To accomplish
that, introduce QCryptoBlockCreateFlags to instruct the creation
process to set the payload_offset_sector to 0.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To support detached LUKS header creation, make the existing 'file'
field in BlockdevCreateOptionsLUKS optional.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
By enhancing the LUKS driver, it is possible to implement
the LUKS volume with a detached header.
Normally a LUKS volume has a layout:
disk: | header | key material | disk payload data |
With a detached LUKS header, you need 2 disks so getting:
disk1: | header | key material |
disk2: | disk payload data |
There are a variety of benefits to doing this:
* Secrecy - the disk2 cannot be identified as containing LUKS
volume since there's no header
* Control - if access to the disk1 is restricted, then even
if someone has access to disk2 they can't unlock
it. Might be useful if you have disks on NFS but
want to restrict which host can launch a VM
instance from it, by dynamically providing access
to the header to a designated host
* Flexibility - your application data volume may be a given
size and it is inconvenient to resize it to
add encryption.You can store the LUKS header
separately and use the existing storage
volume for payload
* Recovery - corruption of a bit in the header may make the
entire payload inaccessible. It might be
convenient to take backups of the header. If
your primary disk header becomes corrupt, you
can unlock the data still by pointing to the
backup detached header
Take the raw-format image as an example to introduce the usage
of the LUKS volume with a detached header:
1. prepare detached LUKS header images
$ dd if=/dev/zero of=test-header.img bs=1M count=32
$ dd if=/dev/zero of=test-payload.img bs=1M count=1000
$ cryptsetup luksFormat --header test-header.img test-payload.img
> --force-password --type luks1
2. block-add a protocol blockdev node of payload image
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-1-storage", "driver":"file",
> "filename":"test-payload.img"}}'
3. block-add a protocol blockdev node of LUKS header as above.
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-2-storage", "driver":"file",
> "filename": "test-header.img" }}'
4. object-add the secret for decrypting the cipher stored in
LUKS header above
$ virsh qemu-monitor-command vm '{"execute":"object-add",
> "arguments":{"qom-type":"secret", "id":
> "libvirt-2-storage-secret0", "data":"abc123"}}'
5. block-add the raw-drived blockdev format node
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-1-format", "driver":"raw",
> "file":"libvirt-1-storage"}}'
6. block-add the luks-drived blockdev to link the raw disk
with the LUKS header by specifying the field "header"
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-2-format", "driver":"luks",
> "file":"libvirt-1-format", "header":"libvirt-2-storage",
> "key-secret":"libvirt-2-format-secret0"}}'
7. hot-plug the virtio-blk device finally
$ virsh qemu-monitor-command vm '{"execute":"device_add",
> "arguments": {"num-queues":"1", "driver":"virtio-blk-pci",
> "drive": "libvirt-2-format", "id":"virtio-disk2"}}'
Starting a VM with a LUKS volume with detached header is
somewhat similar to hot-plug in that both maintaining the
same json command while the starting VM changes the
"blockdev-add/device_add" parameters to "blockdev/device".
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
blkio_alloc_mem_region() requires that the requested buffer size is a
multiple of the memory-alignment property. If it isn't, the allocation
fails with a return value of -EINVAL.
Fix the call in blkio_resize_bounce_pool() to make sure the requested
size is properly aligned.
I observed this problem with vhost-vdpa, which requires page aligned
memory. As the virtio-blk device behind it still had 512 byte blocks, we
got bs->bl.request_alignment = 512, but actually any request that needed
a bounce buffer and was not aligned to 4k would fail without this fix.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240131173140.42398-1-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since AioContext locks have been removed, a BlockBackend's AioContext
may really change at any time (only exception is that it is often
confined to a drained section, as noted in this patch). Therefore,
blk_get_aio_context() cannot rely on its root node's context always
matching that of the BlockBackend.
In practice, whether they match does not matter anymore anyway: Requests
can be sent to BDSs from any context, so anyone who requests the BB's
context should have no reason to require the root node to have the same
context. Therefore, we can and should remove the assertion to that
effect.
In addition, because the context can be set and queried from different
threads concurrently, it has to be accessed with atomic operations.
Buglink: https://issues.redhat.com/browse/RHEL-19381
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20240202144755.671354-2-hreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With GCC 14 the code failed to compile on i686 (and was wrong for any
version of GCC):
../block/blkio.c: In function ‘blkio_file_open’:
../block/blkio.c:857:28: error: passing argument 3 of ‘blkio_get_uint64’ from incompatible pointer type [-Wincompatible-pointer-types]
857 | &s->mem_region_alignment);
| ^~~~~~~~~~~~~~~~~~~~~~~~
| |
| size_t * {aka unsigned int *}
In file included from ../block/blkio.c:12:
/usr/include/blkio.h:49:67: note: expected ‘uint64_t *’ {aka ‘long long unsigned int *’} but argument is of type ‘size_t *’ {aka ‘unsigned int *’}
49 | int blkio_get_uint64(struct blkio *b, const char *name, uint64_t *value);
| ~~~~~~~~~~^~~~~
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 20240130122006.2977938-1-rjones@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The man page for io_uring_queue_init states:
> io_uring_queue_init(3) returns 0 on success and -errno on failure.
and the man page for io_uring_setup (which is one of the functions
where the return value of io_uring_queue_init() can come from) states:
> On error, a negative error code is returned. The caller should not
> rely on errno variable.
Tested using 'sysctl kernel.io_uring_disabled=2'. Output before this
change:
> failed to init linux io_uring ring
Output after this change:
> failed to init linux io_uring ring: Operation not permitted
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240123135044.204985-1-f.ebner@proxmox.com>
During the review of a fix for a concurrency issue in blklogwrites,
it was found that the driver needs an additional fix when enabling
multiqueue, which is a new feature introduced in QEMU 9.0, as the
driver state may be read and written by multiple threads at the same
time, which was not the case when the driver was originally written.
Fix the multi-threaded scenario by introducing a mutex to protect the
mutable fields in the driver state, and always having the mutex locked
by the current thread when accessing them. Also use the mutex and a
CoQueue to ensure that the super block is not being written to by
multiple threads concurrently and updates are properly serialized.
Additionally, add the const qualifier to a few BDRVBlkLogWritesState
pointer targets in contexts where the driver state is not written to.
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Message-ID: <20240119162913.2620245-1-ari@tuxera.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce a new flag 'backing-mask-protocol' for the block-stream QMP
command which instructs the internals to use 'raw' instead of the
protocol driver in case when a image is used without a dummy 'raw'
wrapper.
The flag is designed such that it can be always asserted by management
tools even when there isn't any update to backing files.
The flag will be used by libvirt so that the backing images still
reference the proper format even when libvirt will stop using the dummy
raw driver (raw driver with no other config). Libvirt needs this so that
the images stay compatible with older libvirt versions which didn't
expect that a protocol driver name can appear in the backing file format
field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <bbee9a0a59748a8893289bf8249f568f0d587e62.1701796348.git.pkrempa@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce a new flag 'backing-mask-protocol' for the block-commit QMP
command which instructs the internals to use 'raw' instead of the
protocol driver in case when a image is used without a dummy 'raw'
wrapper.
The flag is designed such that it can be always asserted by management
tools even when there isn't any update to backing files.
The flag will be used by libvirt so that the backing images still
reference the proper format even when libvirt will stop using the dummy
raw driver (raw driver with no other config). Libvirt needs this so that
the images stay compatible with older libvirt versions which didn't
expect that a protocol driver name can appear in the backing file format
field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <2cb46e37093ce793ea1604abc8bbb90f4c8e434b.1701796348.git.pkrempa@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is a bug in the blklogwrites driver pertaining to logging "write
zeroes" operations, causing log corruption. This can be easily observed
by setting detect-zeroes to something other than "off" for the driver.
The issue is caused by a concurrency bug pertaining to the fact that
"write zeroes" operations have to be logged in two parts: first the log
entry metadata, then the zeroed-out region. While the log entry
metadata is being written by bdrv_co_pwritev(), another operation may
begin in the meanwhile and modify the state of the blklogwrites driver.
This is as intended by the coroutine-driven I/O model in QEMU, of
course.
Unfortunately, this specific scenario is mishandled. A short example:
1. Initially, in the current operation (#1), the current log sector
number in the driver state is only incremented by the number of sectors
taken by the log entry metadata, after which the log entry metadata is
written. The current operation yields.
2. Another operation (#2) may start while the log entry metadata is
being written. It uses the current log position as the start offset for
its log entry. This is in the sector right after the operation #1 log
entry metadata, which is bad!
3. After bdrv_co_pwritev() returns (#1), the current log sector
number is reread from the driver state in order to find out the start
offset for bdrv_co_pwrite_zeroes(). This is an obvious blunder, as the
offset will be the sector right after the (misplaced) operation #2 log
entry, which means that the zeroed-out region begins at the wrong
offset.
4. As a result of the above, the log is corrupt.
Fix this by only reading the driver metadata once, computing the
offsets and sizes in one go (including the optional zeroed-out region)
and setting the log sector number to the appropriate value for the next
operation in line.
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Cc: qemu-stable@nongnu.org
Message-ID: <20240109184646.1128475-1-megari@gmx.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using fleecing backup like in [0] on a qcow2 image (with metadata
preallocation) can lead to the following assertion failure:
> bdrv_co_do_block_status: Assertion `!(ret & BDRV_BLOCK_ZERO)' failed.
In the reproducer [0], it happens because the BDRV_BLOCK_RECURSE flag
will be set by the qcow2 driver, so the caller will recursively check
the file child. Then the BDRV_BLOCK_ZERO set too. Later up the call
chain, in bdrv_co_do_block_status() for the snapshot-access driver,
the assertion failure will happen, because both flags are set.
To fix it, clear the recurse flag after the recursive check was done.
In detail:
> #0 qcow2_co_block_status
Returns 0x45 = BDRV_BLOCK_RECURSE | BDRV_BLOCK_DATA |
BDRV_BLOCK_OFFSET_VALID.
> #1 bdrv_co_do_block_status
Because of the data flag, bdrv_co_do_block_status() will now also set
BDRV_BLOCK_ALLOCATED. Because of the recurse flag,
bdrv_co_do_block_status() for the bdrv_file child will be called,
which returns 0x16 = BDRV_BLOCK_ALLOCATED | BDRV_BLOCK_OFFSET_VALID |
BDRV_BLOCK_ZERO. Now the return value inherits the zero flag.
Returns 0x57 = BDRV_BLOCK_RECURSE | BDRV_BLOCK_DATA |
BDRV_BLOCK_OFFSET_VALID | BDRV_BLOCK_ALLOCATED | BDRV_BLOCK_ZERO.
> #2 bdrv_co_common_block_status_above
> #3 bdrv_co_block_status_above
> #4 bdrv_co_block_status
> #5 cbw_co_snapshot_block_status
> #6 bdrv_co_snapshot_block_status
> #7 snapshot_access_co_block_status
> #8 bdrv_co_do_block_status
Return value is propagated all the way up to here, where the assertion
failure happens, because BDRV_BLOCK_RECURSE and BDRV_BLOCK_ZERO are
both set.
> #9 bdrv_co_common_block_status_above
> #10 bdrv_co_block_status_above
> #11 block_copy_block_status
> #12 block_copy_dirty_clusters
> #13 block_copy_common
> #14 block_copy_async_co_entry
> #15 coroutine_trampoline
[0]:
> #!/bin/bash
> rm /tmp/disk.qcow2
> ./qemu-img create /tmp/disk.qcow2 -o preallocation=metadata -f qcow2 1G
> ./qemu-img create /tmp/fleecing.qcow2 -f qcow2 1G
> ./qemu-img create /tmp/backup.qcow2 -f qcow2 1G
> ./qemu-system-x86_64 --qmp stdio \
> --blockdev qcow2,node-name=node0,file.driver=file,file.filename=/tmp/disk.qcow2 \
> --blockdev qcow2,node-name=node1,file.driver=file,file.filename=/tmp/fleecing.qcow2 \
> --blockdev qcow2,node-name=node2,file.driver=file,file.filename=/tmp/backup.qcow2 \
> <<EOF
> {"execute": "qmp_capabilities"}
> {"execute": "blockdev-add", "arguments": { "driver": "copy-before-write", "file": "node0", "target": "node1", "node-name": "node3" } }
> {"execute": "blockdev-add", "arguments": { "driver": "snapshot-access", "file": "node3", "node-name": "snap0" } }
> {"execute": "blockdev-backup", "arguments": { "device": "snap0", "target": "node1", "sync": "full", "job-id": "backup0" } }
> EOF
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-id: 20240116154839.401030-1-f.ebner@proxmox.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
uintptr_t, or unsigned long which is equivalent on Linux I32LP64 systems,
is an unsigned type and there is no need to further cast to __u64 which is
another unsigned integer type; widening casts from unsigned integers
zero-extend the value.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The LuringState typedef is defined twice, in include/block/raw-aio.h and
block/io_uring.c. Move it in include/block/aio.h, which is included
everywhere the typedef is needed, since include/block/aio.h already has
to define the forward reference to the struct.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This variable is about the host OS, not the target. It is used a lot
more since the Meson conversion, but the original sin dates back to 2003.
Time to fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_DARWIN, CONFIG_LINUX and CONFIG_BSD are used in some rules, but
only CONFIG_LINUX has substantial use. Convert them all to if...endif.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The AioContext lock no longer exists.
There is one noteworthy change:
- * More specifically, these functions use BDRV_POLL_WHILE(bs), which
- * requires the caller to be either in the main thread and hold
- * the BlockdriverState (bs) AioContext lock, or directly in the
- * home thread that runs the bs AioContext. Calling them from
- * another thread in another AioContext would cause deadlocks.
+ * More specifically, these functions use BDRV_POLL_WHILE(bs), which requires
+ * the caller to be either in the main thread or directly in the home thread
+ * that runs the bs AioContext. Calling them from another thread in another
+ * AioContext would cause deadlocks.
I am not sure whether deadlocks are still possible. Maybe they have just
moved to the fine-grained locks that have replaced the AioContext. Since
I am not sure if the deadlocks are gone, I have kept the substance
unchanged and just removed mention of the AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20231205182011.1976568-15-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is the big patch that removes
aio_context_acquire()/aio_context_release() from the block layer and
affected block layer users.
There isn't a clean way to split this patch and the reviewers are likely
the same group of people, so I decided to do it in one patch.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-ID: <20231205182011.1976568-7-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stop acquiring/releasing the AioContext lock in
bdrv_graph_wrlock()/bdrv_graph_unlock() since the lock no longer has any
effect.
The distinction between bdrv_graph_wrunlock() and
bdrv_graph_wrunlock_ctx() becomes meaningless and they can be collapsed
into one function.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231205182011.1976568-6-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_is_read_only() only checks if the node is configured to be
read-only eventually, but even if it returns false, writing to the node
may not be permitted at the moment (because it's inactive).
bdrv_is_writable() checks that the node can be written to right now, and
this is what the snapshot operations really need.
Change bdrv_can_snapshot() to use bdrv_is_writable() to fix crashes like
the following:
$ ./qemu-system-x86_64 -hda /tmp/test.qcow2 -loadvm foo -incoming defer
qemu-system-x86_64: ../block/io.c:1990: int bdrv_co_write_req_prepare(BdrvChild *, int64_t, int64_t, BdrvTrackedRequest *, int): Assertion `!(bs->open_flags & BDRV_O_INACTIVE)' failed.
The resulting error message after this patch isn't perfect yet, but at
least it doesn't crash any more:
$ ./qemu-system-x86_64 -hda /tmp/test.qcow2 -loadvm foo -incoming defer
qemu-system-x86_64: Device 'ide0-hd0' is writable but does not support snapshots
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231201142520.32255-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The file-posix block driver currently only sets up Linux AIO and
io_uring in the BDS's AioContext. In the multi-queue block layer we must
be able to submit I/O requests in AioContexts that do not have Linux AIO
and io_uring set up yet since any thread can call into the block driver.
Set up Linux AIO and io_uring for the current AioContext during request
submission. We lose the ability to return an error from
.bdrv_file_open() when Linux AIO and io_uring setup fails (e.g. due to
resource limits). Instead the user only gets warnings and we fall back
to aio=threads. This is still better than a fatal error after startup.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230914140101.1065008-2-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The vhost-user-blk export implement AioContext switches in its drain
implementation. This means that on drain_begin, it detaches the server
from its AioContext and on drain_end, attaches it again and schedules
the server->co_trip coroutine in the updated AioContext.
However, nothing guarantees that server->co_trip is even safe to be
scheduled. Not only is it unclear that the coroutine is actually in a
state where it can be reentered externally without causing problems, but
with two consecutive drains, it is possible that the scheduled coroutine
didn't have a chance yet to run and trying to schedule an already
scheduled coroutine a second time crashes with an assertion failure.
Following the model of NBD, this commit makes the vhost-user-blk export
shut down server->co_trip during drain so that resuming the export means
creating and scheduling a new coroutine, which is always safe.
There is one exception: If the drain call didn't poll (for example, this
happens in the context of bdrv_graph_wrlock()), then the coroutine
didn't have a chance to shut down. However, in this case the AioContext
can't have changed; changing the AioContext always involves a polling
drain. So in this case we can simply assert that the AioContext is
unchanged and just leave the coroutine running or wake it up if it has
yielded to wait for the AioContext to be attached again.
Fixes: e1054cd4aa
Fixes: https://issues.redhat.com/browse/RHEL-1708
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231127115755.22846-1-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the text description file is larger than DESC_SIZE, we force the last
byte in the buffer to be 0 and write it out.
This results in a corruption.
Try to allocate a big buffer in this case.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1923
Signed-off-by: Fam Zheng <fam@euphon.net>
Message-ID: <20231124115654.3239137-1-fam@euphon.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In stream_prepare(), we need to temporarily drop the AioContext lock
that job_prepare_locked() took for us while calling the graph write lock
functions which can poll.
All block nodes related to this block job are in the same AioContext, so
we can pass any of them to bdrv_graph_wrlock()/ bdrv_graph_wrunlock().
Unfortunately, the one that we picked is base, which can be NULL - and
in this case the AioContext lock is not released and deadlocks can
occur.
Fix this by passing s->target_bs, which is never NULL.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231115172012.112727-4-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_graph_wrunlock() calls aio_poll(), which may run callbacks that
have a nested event loop. Nested event loops can depend on other
iothreads making progress, so in order to allow them to make progress it
must not hold the AioContext lock of another thread while calling
aio_poll().
This introduces a @bs parameter to bdrv_graph_wrunlock() whose
AioContext is temporarily dropped (which matches bdrv_graph_wrlock()),
and a bdrv_graph_wrunlock_ctx() that can be used if the BlockDriverState
doesn't necessarily exist any more when unlocking.
This also requires a change to bdrv_schedule_unref(), which was relying
on the incorrectly taken lock. It needs to take the lock itself now.
While this is a separate bug, it can't be fixed a separate patch because
otherwise the intermediate state would either deadlock or try to release
a lock that we don't even hold.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231115172012.112727-3-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[kwolf: Fixed up bdrv_schedule_unref()]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While not all callers of blk_remove_bs() are correct in this respect,
the assumption in the function is that callers hold the AioContext lock
of the BlockBackend (this is required by the drain calls in it).
In order to avoid deadlock in the nested event loop, bdrv_graph_wrlock()
has then to be called with the root BlockDriverState as its parameter
instead of NULL, so that this AioContext lock is temporarily dropped.
Fixes: https://issues.redhat.com/browse/RHEL-1761
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231115172012.112727-2-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No need to declare a new variable in the the inner code block
here, we can re-use the "ret" variable that has been declared
at the beginning of the function. With this change, the code
can now be successfully compiled with -Wshadow=local again.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231023175038.111607-1-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Almost all functions that access bs->file already take the graph
lock now. Add locking to the remaining users and finally annotate the
struct field itself as protected by the graph lock.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-25-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most implementations of .bdrv_open first open their file child (which is
an operation that internally takes the write lock and therefore we
shouldn't hold the graph lock while calling it), and afterwards many
operations that require holding the graph lock, e.g. for accessing
bs->file.
This changes block drivers that follow this pattern to take the graph
lock after opening the child node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-24-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
