To do this, we need to allow creating the NBD server on various ports
instead of a single one (which may not even work if you run just one
instance, because something entirely else might be using that port).
So we just pick a random port in [32768, 32768 + 1024) and try to create
a server there. If that fails, we just retry until something sticks.
For the IPv6 test, we need a different range, though (just above that
one). This is because "localhost" resolves to both 127.0.0.1 and ::1.
This means that if you bind to it, it will bind to both, if possible, or
just one if the other is already in use. Therefore, if the IPv6 test
has already taken [::1]:some_port and we then try to take
localhost:some_port, that will work -- only the second server will be
bound to 127.0.0.1:some_port alone and not [::1]:some_port in addition.
So we have two different servers on the same port, one for IPv4 and one
for IPv6.
But when we then try to connect to the server through
localhost:some_port, we will always end up at the IPv6 one (as long as
it is up), and this may not be the one we want.
Thus, we must make sure not to create an IPv6-only NBD server on the
same port as a normal "dual-stack" NBD server -- which is done by using
distinct port ranges, as explained above.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20181221234750.23577-4-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
By default, qemu-nbd binds to 0.0.0.0. However, we then proceed to
connect to "localhost". Usually, this works out fine; but if this test
is run concurrently, some other test function may have bound a different
server to ::1 (on the same port -- you can bind different serves to the
same port, as long as one is on IPv4 and the other on IPv6).
So running qemu-nbd works, it can bind to 0.0.0.0:NBD_PORT. But
potentially a concurrent test has successfully taken [::1]:NBD_PORT. In
this case, trying to connect to "localhost" will lead us to the IPv6
instance, where we do not want to end up.
Fix this by just binding to "localhost". This will make qemu-nbd error
out immediately and not give us cryptic errors later.
(Also, it will allow us to just try a different port as of a future
patch.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20181221234750.23577-3-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
In some cases, we may want to deal with qemu-nbd errors (e.g. by
launching it in a different configuration until it no longer throws
any). In that case, we do not want its output ending up in the test
output.
It may still be useful for handling the error, though, so add a new
function that works basically like qemu_nbd(), only that it returns the
qemu-nbd output instead of making it end up in the log. In contrast to
qemu_img_pipe(), it does still return the exit code as well, though,
because that is even more important for error handling.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20181221234750.23577-2-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Using of global_qtest is not required here. Let's replace functions like
readl() with the corresponding qtest_* counterparts.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190123120759.7162-3-jusual@mail.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Run qtest with a socket that connects QEMU chardev and test code.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190123120759.7162-2-jusual@mail.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test verifies that we read back the expected I2C WHO_AM_I register
values for the accelerometer/magnetometer.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190110094020.18354-3-stefanha@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcSw5lAAoJENSXKoln91pl8aEH/2KkK5ojXMBY94wH+sCZ17pM
gEuysp20pUudeIk7eUk9aCnq7NHXGJ3GElB6baBq9zwC6qMlVC2Fmj4azluZbjra
ZHKXAeXmibDpRo0UJeovH27+rP8j/NKK+nvZX/+gt0azfC+0SgFwhM6DFFPklJWj
FXGxe2vOUO8Qjke0GwGfqUcjhXJPYg9DEC8RxvliBANME1o0HwkPaNPWWHdjacm2
3K5FeR4jbPYIsfLdazH+G1KfYnQc8GgleSYBIeBKSyyy0z0Z9FXUTZGTjXZSgup4
TqUJbUG0whUtVPzRzd8/DLeWK+2JXfLk35MrwVwv/TDdKuije7Pk7ABrb9B2Lnk=
=O/OP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-january-25-2019' into staging
MIPS queue for January 25, 2019
# gpg: Signature made Fri 25 Jan 2019 13:25:57 GMT
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-january-25-2019:
docs/qemu-cpu-models: Add MIPS/nanoMIPS QEMU supported CPU models
qemu-doc: Add nanoMIPS ISA information
tests: tcg: mips: Remove old directories
tests: tcg: mips: Add two new Makefiles
tests: tcg: mips: Move source files to new locations
MAINTAINERS: Update MIPS sections
target/mips: Add I6500 core configuration
target/mips: nanoMIPS: Fix branch handling
disas: nanoMIPS: Amend DSP instructions related comments
target/mips: Extend gen_scwp() functionality to support EVA
target/mips: Correct the second argument type of cpu_supports_isa()
target/mips: nanoMIPS: Rename macros for extracting 3-bit-coded GPR numbers
target/mips: nanoMIPS: Remove an unused macro
target/mips: nanoMIPS: Remove duplicate macro definitions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add Makefiles for two new direcitories.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
MIPS TCG test will be organized by ISAs and ASEs in future.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Commit 8bca4613 added support for %% in json strings when interpolating,
but in doing so broke handling of % when not interpolating.
When parse_string() is fed a string token containing '%', it skips the
'%' regardless of ctxt->ap, i.e. even it's not interpolating. If the
'%' is the string's last character, it fails an assertion. Else, it
"merely" swallows the '%'.
Fix parse_string() to handle '%' specially only when interpolating.
To gauge the bug's impact, let's review non-interpolating users of this
parser, i.e. code passing NULL context to json_message_parser_init():
* tests/check-qjson.c, tests/test-qobject-input-visitor.c,
tests/test-visitor-serialization.c
Plenty of tests, but we still failed to cover the buggy case.
* monitor.c: QMP input
* qga/main.c: QGA input
* qobject_from_json():
- qobject-input-visitor.c: JSON command line option arguments of
-display and -blockdev
Reproducer: -blockdev '{"%"}'
- block.c: JSON pseudo-filenames starting with "json:"
Reproducer: https://bugzilla.redhat.com/show_bug.cgi?id=1668244#c3
- block/rbd.c: JSON key pairs
Pseudo-filenames starting with "rbd:".
Command line, QMP and QGA input are trusted.
Filenames are trusted when they come from command line, QMP or HMP.
They are untrusted when they come from from image file headers.
Example: QCOW2 backing file name. Note that this is *not* the security
boundary between host and guest. It's the boundary between host and an
image file from an untrusted source.
Neither failing an assertion nor skipping a character in a filename of
your choice looks exploitable. Note that we don't support compiling
with NDEBUG.
Fixes: 8bca4613e6
Cc: qemu-stable@nongnu.org
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Message-Id: <20190102140535.11512-1-cfergeau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
[Commit message extended to discuss impact]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
New pages-per-second stat, a new test, and a bunch
of fixes and tidy ups.
-----BEGIN PGP SIGNATURE-----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=xxTj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20190123a' into staging
Migration pull 2019-01-23
New pages-per-second stat, a new test, and a bunch
of fixes and tidy ups.
# gpg: Signature made Wed 23 Jan 2019 15:54:48 GMT
# gpg: using RSA key 0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20190123a:
migration: introduce pages-per-second
vmstate: constify SaveVMHandlers
tests: add /vmstate/simple/array
migration/rdma: unregister fd handler
migration: unify error handling for process_incoming_migration_co
migration: add more error handling for postcopy_ram_enable_notify
migration: multifd_save_cleanup() can't fail, simplify
migration: fix the multifd code when receiving less channels
Fix segmentation fault when qemu_signal_init fails
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The qio_channel_socket_close method for was mistakenly unlinking the
UNIX server socket, even if the channel was a client connection. This
was not noticed with chardevs, since they never call close, but with the
VNC server, this caused the VNC server socket to be deleted after the
first client quit.
The qio_channel_socket_close method also needlessly reimplemented the
logic that already exists in socket_listen_cleanup(). Just call that
method directly, for listen sockets only.
This fixes a regression introduced in QEMU 3.0.0 with
commit d66f78e1ea
Author: Pavel Balaev <mail@void.so>
Date: Mon May 21 19:17:35 2018 +0300
Delete AF_UNIX socket after close
Fixes launchpad #1795100
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Hot-unplug a scsi-hd using an iothread. The previous patch fixes a
segfault in this scenario.
This patch adds a regression test.
Suggested-by: Alberto Garcia <berto@igalia.com>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190114133257.30299-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The qapi_event_send_FOO() functions emit events like this:
QMPEventFuncEmit emit;
emit = qmp_event_get_func_emit();
if (!emit) {
return;
}
qmp = qmp_event_build_dict("FOO");
[put event arguments into @qmp...]
emit(QAPI_EVENT_FOO, qmp);
The value of qmp_event_get_func_emit() depends only on the program:
* In qemu-system-FOO, it's always monitor_qapi_event_queue.
* In tests/test-qmp-event, it's always event_test_emit.
* In all other programs, it's always null.
This is exactly the kind of dependence the linker is supposed to
resolve; we don't actually need an indirection.
Note that things would fall apart if we linked more than one QAPI
schema into a single program: each set of qapi_event_send_FOO() uses
its own event enumeration, yet they share a single emit function.
Which takes the event enumeration as an argument. Which one if
there's more than one?
More seriously: how does this work even now? qemu-system-FOO wants
QAPIEvent, and passes a function taking that to
qmp_event_set_func_emit(). test-qmp-event wants test_QAPIEvent, and
passes a function taking that to qmp_event_set_func_emit().
It works by type trickery, of course:
typedef void (*QMPEventFuncEmit)(unsigned event, QDict *dict);
void qmp_event_set_func_emit(QMPEventFuncEmit emit);
QMPEventFuncEmit qmp_event_get_func_emit(void);
We use unsigned instead of the enumeration type. Relies on both
enumerations boiling down to unsigned, which happens to be true for
the compilers we use.
Clean this up as follows:
* Generate qapi_event_send_FOO() that call PREFIX_qapi_event_emit()
instead of the value of qmp_event_set_func_emit().
* Generate a prototype for PREFIX_qapi_event_emit() into
qapi-events.h.
* PREFIX_ is empty for qapi/qapi-schema.json, and test_ for
tests/qapi-schema/qapi-schema-test.json. It's qga_ for
qga/qapi-schema.json, and doc-good- for
tests/qapi-schema/doc-good.json, but those don't define any events.
* Rename monitor_qapi_event_queue() to qapi_event_emit() instead of
passing it to qmp_event_set_func_emit(). This takes care of
qemu-system-FOO.
* Rename event_test_emit() to test_qapi_event_emit() instead of
passing it to qmp_event_set_func_emit(). This takes care of
tests/test-qmp-event.
* Add a qapi_event_emit() that does nothing to stubs/monitor.c. This
takes care of all other programs that link code emitting QMP events.
* Drop qmp_event_set_func_emit(), qmp_event_get_func_emit().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181218182234.28876-3-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[Commit message typos fixed]
A very simple test to show VMSTATE_*_ARRAY usage and result. It could
be systematically extended to other primitives, but I leave that as an
exercise for others :).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181114132130.27141-1-marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This adds a rule to run all of our softfloat tests. It is included as
a pre-requisite to check-tcg and check-unit as well.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Wire up test/fp-test into the main testing Makefile. Currently we skip
some of the extF80 and f128 related tests. Once we re-factor and fix
these tests the plumbing should get simpler.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We get HOST_WORDS_BIGENDIAN from config-host.h, but the include
is missing. Fix it.
This fixes `make check-softfloat' on big endian hosts.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
At this point random_ops[] only contains normals, so there's
no need to do anything to them. In fact, raising the exponent
here can make the output !normal, which is precisely
what the comment says we want to avoid.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The second test in the branches is wrong; fix while converting
to a switch statement, which is easier to get right.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This test was merged into drive_del-test in 2014.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Fixes: e2f3f22188 ("Merge of qdev-monitor-test, blockdev-test")
Signed-off-by: Thomas Huth <thuth@redhat.com>
The hexloader test invokes QEMU with the -nographic argument. This
is unnecessary, because the qtest_initf() function will pass it
-display none, which suffices to disable the graphical window.
It also means that the QEMU process will make the stdin/stdout
O_NONBLOCK. Since O_NONBLOCK is not per-file descriptor but per
"file description", this non-blocking behaviour is then shared
with any other process that's using the stdin/stdout of the
'make check' run, including make itself. This can result in make
falling over with "make: write error: stdout" because it got
an unexpected EINTR trying to write output messages to the terminal.
This is particularly noticable if running 'make check' in a loop with
while make check; do true; done
(It does not affect single make check runs so much because the
shell will remove the O_NONBLOCK status before it reads the
terminal for interactive input.)
Remove the unwanted -nographic argument.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Pass around the QTestState, so that we can finally get rid of the
out-of-favor global_qtest variable in this file, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Pass around the QTestState from function to function, so that we can finally
get rid of the out-of-favor global_qtest variable in this file, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Pass around the test state explicitly, to be able to use the qtest_in*()
and qtest_out*() function in this test.
Signed-off-by: Thomas Huth <thuth@redhat.com>
To be able to build and test QEMU binaries where certain devices or machines
are disabled, we have to use the right CONFIG_* switches to run certain tests
only if the corresponding device or machine really has been compiled into
the binary.
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
To be able to build and test QEMU binaries where certain devices are
disabled, we have to use the right CONFIG_* switches to run certain
tests only if the corresponding device really has been compiled into
the binary.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Any good new feature deserves some regression testing :)
Coverage includes:
- 223: what happens when there are 0 or more than 1 export,
proof that we can see multiple contexts including qemu:dirty-bitmap
- 233: proof that we can list over TLS, and that mix-and-match of
plain/TLS listings will behave sanely
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190117193658.16413-22-eblake@redhat.com>
We have a race between the nbd server and the client both trying
to report errors at once which can make the test sometimes fail
if the output lines swap order under load. Break the race by
collecting server messages into a file and then replaying that
at the end of the test.
We may yet want to fix the server to not output ANYTHING for a
client action except when -v was used (to avoid malicious clients
from being able to DoS a server by filling up its logs), but that
is saved for a future patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
CC: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190117193658.16413-2-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The ipmi-bt-test fails intermittently, especially on the NetBSD VM.
The frequency of this failure has recently gone up sharply to the
point that I'm having to retry the NetBSD build multiple times
to get a pass when merging pull requests.
Disable the test until we can figure out why it's failing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190118185402.3065-1-peter.maydell@linaro.org
Fixes:
* Actually test different Python versions on Travis CI
* Fix qemu.py error message when qemu dies from signal
Cleanups:
* Track Python version on config-host.mak
* Remove fixed crashes from scripts/device-crash-test
* Acceptance tests: Linux initrd checking test
* Fix utf-8 mangling at scripts/replay-dump.py
* Remove unused python imports from multiple scripts
-----BEGIN PGP SIGNATURE-----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=T5Wa
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/python-next-pull-request' into staging
Python queue, 2019-01-17
Fixes:
* Actually test different Python versions on Travis CI
* Fix qemu.py error message when qemu dies from signal
Cleanups:
* Track Python version on config-host.mak
* Remove fixed crashes from scripts/device-crash-test
* Acceptance tests: Linux initrd checking test
* Fix utf-8 mangling at scripts/replay-dump.py
* Remove unused python imports from multiple scripts
# gpg: Signature made Thu 17 Jan 2019 20:16:41 GMT
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/python-next-pull-request:
scripts/replay-dump.py: fix utf-8 mangling
qemu.py: Fix error message when qemu dies from signal
Acceptance tests: add Linux initrd checking test
check-help: visual and content improvements
Travis CI: make specified Python versions usable on jobs
check-venv: use recorded Python version
configure: keep track of Python version
scripts: Remove unused python imports
scripts/device-crash-test: Remove known crashes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
tpm physical presence interface
rsc support in virtio net
ivshmem is removed
misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcQTW/AAoJECgfDbjSjVRpY34H/0wniUqht3CVVihAfC9qnL7N
jgAJ41OGgrrCmXLrwa5P5iWxIKRjp2Odo7DQ2dl+9sqYshe6WoBBXmqEa8bDeldE
69EJ3xSnZjkpScqXKoSaDO3dtibUGpdvlTKpjuh7q2FFBOvNvf3hQubhyt/vINsO
qoDMqycjXJkHSaZLfdNb3P/LAkAuHI4veNk8KEbog3XTijSUbZlb2GYc8vT/agka
0SldiEVi9CTIh7co0L2BkcLVeTMVrF3OZuWDek3tVHXPxPaNbQM3GMvHZaxqZusU
SZinnNhcnI++kgLZVHuurxo7e1S9d8Oy0QuHGX8CZ1sfeqy3vzxer0Hbb7BdLIY=
=GhIM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio: fixes, features
tpm physical presence interface
rsc support in virtio net
ivshmem is removed
misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 18 Jan 2019 02:11:11 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (49 commits)
migration: Use strnlen() for fixed-size string
migration: Fix stringop-truncation warning
hw/acpi: Use QEMU_NONSTRING for non NUL-terminated arrays
block/sheepdog: Use QEMU_NONSTRING for non NUL-terminated arrays
qemu/compiler: Define QEMU_NONSTRING
acpi: update expected files
hw: acpi: Fix memory hotplug AML generation error
tpm: clear RAM when "memory overwrite" requested
acpi: add ACPI memory clear interface
acpi: build TPM Physical Presence interface
acpi: expose TPM/PPI configuration parameters to firmware via fw_cfg
tpm: allocate/map buffer for TPM Physical Presence interface
tpm: add a "ppi" boolean property
hw/misc/edu: add msi_uninit() for pci_edu_uninit()
virtio: Make disable-legacy/disable-modern compat properties optional
globals: Allow global properties to be optional
virtio: virtio 9p really requires CONFIG_VIRTFS to work
virtio: split virtio crypto bits from virtio-pci.h
virtio: split virtio gpu bits from virtio-pci.h
virtio: split virtio serial bits from virtio-pci
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Virtio console and qga tests also depend on CONFIG_VIRTIO_SERIAL.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Notice that we can't still run tests with it disabled. Both cdrom-test and
drive_del-test use virtio-scsi without checking if it is enabled.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
AcpiSdtTable::header::signature is the only remained field from
AcpiTableHeader structure used by tests. Instead of using packed
structure to access signature, just read it directly from table
blob and remove no longer used AcpiSdtTable::header / union and
keep only AcpiSdtTable::aml byte array.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
