Protected Virtualization (PV) is not a real hardware device:
it is a feature of the firmware on s390x that is exposed to
userspace via the KVM interface.
Move the pv.c/pv.h files to target/s390x/kvm/ to make this clearer.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230624200644.23931-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Kernel commit 292a7d6fca33 ("KVM: s390: pv: fix asynchronous teardown
for small VMs") causes the KVM_PV_ASYNC_CLEANUP_PREPARE ioctl to fail
if the VM is not larger than 2GiB. QEMU would attempt it and fail,
print an error message, and then proceed with a normal teardown.
Avoid attempting to use asynchronous teardown altogether when the VM is
not larger than 2 GiB. This will avoid triggering the error message and
also avoid pointless overhead; normal teardown is fast enough for small
VMs.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Fixes: c3a073c610 ("s390x/pv: Add support for asynchronous teardown for reboot")
Link: https://lore.kernel.org/all/20230421085036.52511-2-imbrenda@linux.ibm.com/
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20230510105531.30623-2-imbrenda@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Fix inline function parameter in pv.h]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch adds support for the asynchronous teardown for reboot for
protected VMs.
When attempting to tear down a protected VM, try to use the new
asynchronous interface first. If that fails, fall back to the classic
synchronous one.
The asynchronous interface involves invoking the new
KVM_PV_ASYNC_DISABLE_PREPARE command for the KVM_S390_PV_COMMAND ioctl.
This will prepare the current protected VM for asynchronous teardown.
Once the protected VM is prepared for teardown, execution can continue
immediately.
Once the protected VM has been prepared, a new thread is started to
actually perform the teardown. The new thread uses the new
KVM_PV_ASYNC_DISABLE command for the KVM_S390_PV_COMMAND ioctl. The
previously prepared protected VM is torn down in the new thread.
Once KVM_PV_ASYNC_DISABLE is invoked, it is possible to use
KVM_PV_ASYNC_DISABLE_PREPARE again. If a protected VM has already been
prepared and its cleanup has not started, it will not be possible to
prepare a new VM. In that case the classic synchronous teardown has to
be performed.
The synchronous teardown will now also clean up any prepared VMs whose
asynchronous teardown has not been initiated yet.
This considerably speeds up the reboot of a protected VM; for large VMs
especially, it could take a long time to perform a reboot with the
traditional synchronous teardown, while with this patch it is almost
immediate.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230214163035.44104-3-imbrenda@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
ISM device firmware stores unique state information that can
can cause a wholesale unmap of the associated IOMMU (e.g. when
we get a termination signal for QEMU) to trigger firmware errors
because firmware believes we are attempting to invalidate entries
that are still in-use by the guest OS (when in fact that guest is
in the process of being terminated or rebooted).
To alleviate this, register both a shutdown notifier (for unexpected
termination cases e.g. virsh destroy) as well as a reset callback
(for cases like guest OS reboot). For each of these scenarios, trigger
PCI device reset; this is enough to indicate to firmware that the IOMMU
is no longer in-use by the guest OS, making it safe to invalidate any
associated IOMMU entries.
Fixes: 15d0e7942d ("s390x/pci: don't fence interpreted devices without MSI-X")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20221209195700.263824-1-mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
[thuth: Adjusted the hunk in s390-pci-vfio.c due to different context]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, s390x-pci performs accounting against the vfio DMA
limit and triggers the guest to clean up mappings when the limit
is reached. Let's go a step further and also limit the size of
the supported DMA aperture reported to the guest based upon the
initial vfio DMA limit reported for the container (if less than
than the size reported by the firmware/host zPCI layer). This
avoids processing sections of the guest DMA table during global
refresh that, for common use cases, will never be used anway, and
makes exhausting the vfio DMA limit due to mismatch between guest
aperture size and host limit far less likely and more indicitive
of an error.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20221028194758.204007-4-mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit 59d1ce4439.
The "zpcii-disable" machine property is redundant with the "interpret"
zPCI device property. Remove it for clarification.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20221107161349.1032730-2-clg@kaod.org>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The S390 CPU topology accepts the smp.threads argument while
in reality it does not effectively allow multthreading.
Let's keep this behavior for machines older than 7.2 and
refuse to use threads in newer machines until multithreading
is really exposed to the guest by the machine.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20221103170150.20789-3-pmorel@linux.ibm.com>
[thuth: Small fixes to the commit description]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's add a few bits of code which hide the new KVM PV dump API from
us via new functions.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
[ Marc-André: fix up for compilation issue ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221017083822.43118-10-frankja@linux.ibm.com>
Introduce an interface over which we can get information about UV data.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221017083822.43118-8-frankja@linux.ibm.com>
The zpcii-disable machine property can be used to force-disable the use
of zPCI interpretation facilities for a VM. By default, this setting
will be off for machine 7.2 and newer.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20220902172737.170349-9-mjrosato@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Fix contextual conflict in ccw_machine_7_1_instance_options()]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's use the reserved pool of simulated PCI groups to allow intercept
devices to have separate groups from interpreted devices as some group
values may be different. If we run out of simulated PCI groups, subsequent
intercept devices just get the default group.
Furthermore, if we encounter any PCI groups from hostdevs that are marked
as simulated, let's just assign them to the default group to avoid
conflicts between host simulated groups and our own simulated groups.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20220902172737.170349-7-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use the associated kvm ioctl operation to enable adapter event notification
and forwarding for devices when requested. This feature will be set up
with or without firmware assist based upon the 'forwarding_assist' setting.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20220902172737.170349-6-mjrosato@linux.ibm.com>
[thuth: Rename "forwarding_assist" property to "forwarding-assist"]
Signed-off-by: Thomas Huth <thuth@redhat.com>
If the ZPCI_OP ioctl reports that is is available and usable, then the
underlying KVM host will enable load/store intepretation for any guest
device without a SHM bit in the guest function handle. For a device that
will be using interpretation support, ensure the guest function handle
matches the host function handle; this value is re-checked every time the
guest issues a SET PCI FN to enable the guest device as it is the only
opportunity to reflect function handle changes.
By default, unless interpret=off is specified, interpretation support will
always be assumed and exploited if the necessary ioctl and features are
available on the host kernel. When these are unavailable, we will silently
revert to the interception model; this allows existing guest configurations
to work unmodified on hosts with and without zPCI interpretation support,
allowing QEMU to choose the best support model available.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220902172737.170349-4-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In order to interface with the underlying host zPCI device, we need
to know its function handle. Add a routine to grab this from the
vfio CLP capabilities chain.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20220902172737.170349-3-mjrosato@linux.ibm.com>
[thuth: Replace free(info) with g_free(info)]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Macros should be ALL_CAPS. Normalize the exception.
Done with scripts/clean-header-guards.pl.
include/hw/xen/interface/ and tools/virtiofsd/ left alone, because
these were imported from Xen and libfuse respectively.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Previously, we required bits 5, 6 and 7 to be zero (0x07 == 0b111). But,
as per the principles of operation, bit 5 is ignored in MSCH and bits 0,
1, 6 and 7 need to be zero.
As both PMCW_FLAGS_MASK_INVALID and ioinst_schib_valid() are only used
by ioinst_handle_msch(), adjust the mask accordingly.
Fixes: db1c8f53bf ("s390: Channel I/O basic definitions.")
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20211216131657.1057978-1-nrb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The DTSM is a mask that specifies which I/O Address Translation designation
types are supported. Today QEMU only supports DT=1.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20211203142706.427279-5-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The current default PCI group being used can technically collide with a
real group ID passed from a hostdev. Let's instead use a group ID that
comes from a special pool (0xF0-0xFF) that is architected to be reserved
for simulated devices.
Fixes: 28dc86a072 ("s390x/pci: use a PCI Group structure")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20211203142706.427279-2-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The PAGE_SIZE macro is causing trouble on Alpine Linux since it
clashes with a macro from a system header there. We already have
the TARGET_PAGE_SIZE, TARGET_PAGE_MASK and TARGET_PAGE_BITS macros
in QEMU anyway, so let's simply replace the PAGE_SIZE, PAGE_MASK
and PAGE_SHIFT macro with their TARGET_* counterparts.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/572
Message-Id: <20210901125800.611183-1-thuth@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's enable storage keys lazily under TCG, just as we do under KVM.
Only fairly old Linux versions actually make use of storage keys, so it
can be kind of wasteful to allocate quite some memory and track
changes and references if nobody cares.
We have to make sure to flush the TLB when enabling storage keys after
the VM was already running: otherwise it might happen that we don't
catch references or modifications afterwards.
Add proper documentation to all callbacks.
The kvm-unit-tests skey tests keeps on working with this change.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-14-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
... and make it return a bool instead.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-13-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When a subchannel becomes pending with unit exception, start
pending (and for that matter, halt or clear pending) are not
removed in the actl. Device active and subchannel active,
however, are (due to the subchannel becoming status pending
with primary respectively secondary status).
The other conditions in the actl are only cleared when the
guest executes tsch on the subchannel.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Jared Rossi <jrossi@linux.ibm.com>
Message-Id: <20210705163952.736020-3-cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
move everything related to translate, as well as HELPER code in tcg/
mmu_helper.c stays put for now, as it contains both TCG and KVM code.
After the reshuffling, update MAINTAINERS accordingly.
Make use of the new directory:
target/s390x/tcg/
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-8-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Wire in the subchannel callback for building the IRB
ESW and ECW space for passthrough devices, and copy
the hardware's ESW into the IRB we are building.
If the hardware presented concurrent sense, then copy
that sense data into the IRB's ECW space.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20210617232537.1337506-5-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Currently, all subchannel types have "sense data" copied into
the IRB.ECW space, and a couple flags enabled in the IRB.SCSW
and IRB.ESW. But for passthrough (vfio-ccw) subchannels,
this data isn't populated in the first place, so enabling
those flags leads to unexpected behavior if the guest tries to
process the sense data (zeros) in the IRB.ECW.
Let's add a subchannel callback that builds these portions of
the IRB, and move the existing code into a routine for those
virtual subchannels. The passthrough subchannels will be able
to piggy-back onto this later.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20210617232537.1337506-4-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The Interrupt Response Block is comprised of several other
structures concatenated together, but only the 12-byte
Subchannel-Status Word (SCSW) is defined as a proper struct.
Everything else is a simple array of 32-bit words.
Let's define a proper struct for the 20-byte Extended-Status
Word (ESW) so that we can make good decisions about the sense
data that would go into the ECW area for virtual vs
passthrough devices.
[CH: adapted ESW definition to build with mingw, as discussed]
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20210617232537.1337506-2-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The definition S390_ADAPTER_SUPPRESSIBLE was moved to "cpu.h", per
suggestion of Thomas Huth. From interface design perspective, IMHO, not
a good thing as it belongs to the public interface of
css_register_io_adapters(). We did this because CONFIG_KVM requeires
NEED_CPU_H and Thomas, and other commenters did not like the
consequences of that.
Moving the interrupt related declarations to s390_flic.h was suggested
by Cornelia Huck.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <20210317095622.2839895-2-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
An assorted set of spelling fixes in various places.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210309111510.79495-1-mjt@msgid.tls.msk.ru>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
At least some s390 cpu models support "Protected Virtualization" (PV),
a mechanism to protect guests from eavesdropping by a compromised
hypervisor.
This is similar in function to other mechanisms like AMD's SEV and
POWER's PEF, which are controlled by the "confidential-guest-support"
machine option. s390 is a slightly special case, because we already
supported PV, simply by using a CPU model with the required feature
(S390_FEAT_UNPACK).
To integrate this with the option used by other platforms, we
implement the following compromise:
- When the confidential-guest-support option is set, s390 will
recognize it, verify that the CPU can support PV (failing if not)
and set virtio default options necessary for encrypted or protected
guests, as on other platforms. i.e. if confidential-guest-support
is set, we will either create a guest capable of entering PV mode,
or fail outright.
- If confidential-guest-support is not set, guests might still be
able to enter PV mode, if the CPU has the right model. This may be
a little surprising, but shouldn't actually be harmful.
To start a guest supporting Protected Virtualization using the new
option use the command line arguments:
-object s390-pv-guest,id=pv0 -machine confidential-guest-support=pv0
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
The zPCI group and function structures are big endian. However, we do
not consistently store them as big endian locally, and are missing some
conversions.
Let's just store the structures as host endian instead and convert to
big endian when actually handling the instructions retrieving the data.
Also fix the layout of ClpReqQueryPciGrp: g is actually only 8 bit. This
also fixes accesses on little endian hosts, and makes accesses on big
endian hosts consistent.
Fixes: 28dc86a072 ("s390x/pci: use a PCI Group structure")
Fixes: 9670ee7527 ("s390x/pci: use a PCI Function structure")
Fixes: 1e7552ff5c ("s390x/pci: get zPCI function info from host")
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201118104202.1301363-1-cohuck@redhat.com>
s390-pci-vfio.c calls into the vfio code, so we need it to be
built conditionally on vfio (which implies CONFIG_LINUX).
Fixes: cd7498d07f ("s390x/pci: Add routine to get the vfio dma available count")
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20201103123237.718242-1-cohuck@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We use the capability chains of the VFIO_DEVICE_GET_INFO ioctl to retrieve
the CLP information that the kernel exports.
To be compatible with previous kernel versions we fall back on previous
predefined values, same as the emulation values, when the ioctl is found
to not support capability chains. If individual CLP capabilities are not
found, we fall back on default values for only those capabilities missing
from the chain.
This patch is based on work previously done by Pierre Morel.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[aw: non-Linux build fixes]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We use a ClpRspQueryPci structure to hold the information related to a
zPCI Function.
This allows us to be ready to support different zPCI functions and to
retrieve the zPCI function information from the host.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We use a S390PCIGroup structure to hold the information related to a
zPCI Function group.
This allows us to be ready to support multiple groups and to retrieve
the group information from the host.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
To have a clean separation between s390-pci-bus.h and s390-pci-inst.h
headers we export the PCI CLP instructions in a dedicated header.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When an s390 guest is using lazy unmapping, it can result in a very
large number of oustanding DMA requests, far beyond the default
limit configured for vfio. Let's track DMA usage similar to vfio
in the host, and trigger the guest to flush their DMA mappings
before vfio runs out.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[aw: non-Linux build fixes]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Create new files for separating out vfio-specific work for s390
pci. Add the first such routine, which issues VFIO_IOMMU_GET_INFO
ioctl to collect the current dma available count.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[aw: Fix non-Linux build with CONFIG_LINUX]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Seems a more appropriate location for them.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
DIAGNOSE 0x318 (diag318) is an s390 instruction that allows the storage
of diagnostic information that is collected by the firmware in the case
of hardware/firmware service events.
QEMU handles the instruction by storing the info in the CPU state. A
subsequent register sync will communicate the data to the hypervisor.
QEMU handles the migration via a VM State Description.
This feature depends on the Extended-Length SCCB (els) feature. If
els is not present, then a warning will be printed and the SCLP bit
that allows the Linux kernel to execute the instruction will not be
set.
Availability of this instruction is determined by byte 134 (aka fac134)
bit 0 of the SCLP Read Info block. This coincidentally expands into the
space used for CPU entries, which means VMs running with the diag318
capability may not be able to read information regarding all CPUs
unless the guest kernel supports an extended-length SCCB.
This feature is not supported in protected virtualization mode.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20200915194416.107460-9-walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
As more features and facilities are added to the Read SCP Info (RSCPI)
response, more space is required to store them. The space used to store
these new features intrudes on the space originally used to store CPU
entries. This means as more features and facilities are added to the
RSCPI response, less space can be used to store CPU entries.
With the Extended-Length SCCB (ELS) facility, a KVM guest can execute
the RSCPI command and determine if the SCCB is large enough to store a
complete reponse. If it is not large enough, then the required length
will be set in the SCCB header.
The caller of the SCLP command is responsible for creating a
large-enough SCCB to store a complete response. Proper checking should
be in place, and the caller should execute the command once-more with
the large-enough SCCB.
This facility also enables an extended SCCB for the Read CPU Info
(RCPUI) command.
When this facility is enabled, the boundary violation response cannot
be a result from the RSCPI, RSCPI Forced, or RCPUI commands.
In order to tolerate kernels that do not yet have full support for this
feature, a "fixed" offset to the start of the CPU Entries within the
Read SCP Info struct is set to allow for the original 248 max entries
when this feature is disabled.
Additionally, this is introduced as a CPU feature to protect the guest
from migrating to a machine that does not support storing an extended
SCCB. This could otherwise hinder the VM from being able to read all
available CPU entries after migration (such as during re-ipl).
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20200915194416.107460-7-walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The header contained within the SCCB passed to the SCLP service call
contains the actual length of the SCCB. Instead of allocating a static
4K size for the work sccb, let's allow for a variable size determined
by the value in the header. The proper checks are already in place to
ensure the SCCB length is sufficent to store a full response and that
the length does not cross any explicitly-set boundaries.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20200915194416.107460-4-walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
One of the goals of having less boilerplate on QOM declarations
is to avoid human error. Requiring an extra argument that is
never used is an opportunity for mistakes.
Remove the unused argument from OBJECT_DECLARE_TYPE and
OBJECT_DECLARE_SIMPLE_TYPE.
Coccinelle patch used to convert all users of the macros:
@@
declarer name OBJECT_DECLARE_TYPE;
identifier InstanceType, ClassType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_TYPE(InstanceType, ClassType,
- lowercase,
UPPERCASE);
@@
declarer name OBJECT_DECLARE_SIMPLE_TYPE;
identifier InstanceType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_SIMPLE_TYPE(InstanceType,
- lowercase,
UPPERCASE);
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200916182519.415636-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This will make the type name constant consistent with the name of
the type checking macro.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200902224311.1321159-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Rename it to be consistent with S390_CCW_MACHINE and
TYPE_S390_CCW_MACHINE.
This will make future conversion to OBJECT_DECLARE* easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Tested-By: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200825192110.3528606-49-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
