Previously, guest_loaddr was not taken into account when returning an
address from pgb_find_hole when /proc/self/maps was unavailable which
caused an improper guest_base address to be calculated.
This could cause a SIGSEGV later in load_elf_image -> target_mmap for
ET_EXEC type images since the mmap MAP_FIXED flag is specified which
could clobber existing mappings at the address returnd by g2h().
mmap(0xd87000, 16846912, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE|0x100000, -1, 0) = 0xd87000
munmap(0xd87000, 16846912) = 0
write(2, "Locating guest address space @ 0"..., 40Locating guest address space @ 0xd87000) = 40
mmap(0x1187000, 16850944, PROT_NONE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = 0x1187000
--- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_ACCERR, si_addr=0x2188310} ---
+++ killed by SIGSEGV +++
Now, pgd_find_hole accounts for guest_loaddr in this scenario.
Fixes: ad592e37df ("linux-user: provide fallback pgd_find_hole for bare chroots")
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210131061948.15990-1-vfazio@xes-inc.com>
[lv: updated it to check if ret == -1]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Previously, pgd_find_hole_fallback assumed that if the build host's libc
had MAP_FIXED_NOREPLACE defined that the address returned by mmap would
match the requested address. This is not a safe assumption for Linux
kernels prior to 4.17
Now, we always compare mmap's resultant address with the requested
address and no longer short-circuit based on MAP_FIXED_NOREPLACE.
Fixes: 2667e069e7 ("linux-user: don't use MAP_FIXED in pgd_find_hole_fallback")
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210131061930.14554-1-vfazio@xes-inc.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Previously, if the build host's libc did not define MAP_FIXED_NOREPLACE
or if the running kernel didn't support that flag, it was possible for
pgd_find_hole_fallback to munmap an incorrect address which could lead to
SIGSEGV if the range happened to overlap with the mapped address of the
QEMU binary.
mmap(0x1000, 22261224, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = 0x7f889d331000
munmap(0x1000, 22261224) = 0
--- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=0x84b817} ---
++ killed by SIGSEGV +++
Now, always munmap the address returned by mmap.
Fixes: 2667e069e7 ("linux-user: don't use MAP_FIXED in pgd_find_hole_fallback")
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210131061849.12615-1-vfazio@xes-inc.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add --preserve-argv0 in qemu-binfmt-conf.sh to configure the preserve-argv0
flag.
This patch allows to use new flag in AT_FLAGS to detect if
preserve-argv0 is configured for this interpreter:
argv[0] (the full pathname provided by binfmt-misc) is removed and
replaced by argv[1] (the original argv[0] provided by binfmt-misc when
'P'/preserve-arg[0] is set)
For instance with this patch and kernel support for AT_FLAGS:
$ sudo chroot m68k-chroot sh -c 'echo $0'
sh
without this patch:
$ sudo chroot m68k-chroot sh -c 'echo $0'
/usr/bin/sh
The new flag is available in kernel (v5.12) since:
2347961b11d4 ("binfmt_misc: pass binfmt_misc flags to the interpreter")
This can be tested with something like:
# cp ..../qemu-ppc /chroot/powerpc/jessie
# qemu-binfmt-conf.sh --qemu-path / --systemd ppc --credential yes \
--persistent no --preserve-argv0 yes
# systemctl restart systemd-binfmt.service
# cat /proc/sys/fs/binfmt_misc/qemu-ppc
enabled
interpreter //qemu-ppc
flags: POC
offset 0
magic 7f454c4601020100000000000000000000020014
mask ffffffffffffff00fffffffffffffffffffeffff
# chroot /chroot/powerpc/jessie sh -c 'echo $0'
sh
# qemu-binfmt-conf.sh --qemu-path / --systemd ppc --credential yes \
--persistent no --preserve-argv0 no
# systemctl restart systemd-binfmt.service
# cat /proc/sys/fs/binfmt_misc/qemu-ppc
enabled
interpreter //qemu-ppc
flags: OC
offset 0
magic 7f454c4601020100000000000000000000020014
mask ffffffffffffff00fffffffffffffffffffeffff
# chroot /chroot/powerpc/jessie sh -c 'echo $0'
/bin/sh
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210222105004.1642234-1-laurent@vivier.eu>
The guest binary and libraries are not always map with the
executable bit in the host process. The guest may read a
/proc/self/maps with no executable address range. The
perm fields should be based on the guest permission inside
Qemu.
Signed-off-by: Nicolas Surbayrole <nsurbayrole@quarkslab.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210308091959.986540-1-nsurbayrole@quarkslab.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
- add warning text to quickstart example
- add CFI tests to CI
- use --arch-only for docker pre-requisites
- fix .editorconfig for emacs
- add guest-loader for Xen-like hypervisor testing
- move generic-loader docs into manual proper
- move semihosting out of hw/
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmBI50MACgkQ+9DbCVqe
KkSyKggAhPZW+7sReVEsFdnVfwuo3evW7auoW44mghNbikTnm3RfoahYTrek8lGZ
AEo2gFMbzENW0j88e0OvSYYtwkVz3sD68bygfXerti6sQwWlwkf42I/suWjJNLph
oVKGEEdJess9+zR13Cu6RAq5RaTwzDPGPjUwTbeJPpAps4+UZV3hsxhaxs8keII6
GBa/idnh0qEApP2NDLKiSASrYZM7xGvljE7zO4qhchd6iSH/o5rCtkoB2tRCcXGo
+KF8LyBsUNf7GiWp0yYZMZUQ3Pqskqma8N3d2A4UlS1kXvxeX/FiORkG/Ne8bH1Z
VZ1Z/xbyXGlVkiP1bcoYSc6XWHNDTw==
=R9zQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2' into staging
Testing, guest-loader and other misc tweaks
- add warning text to quickstart example
- add CFI tests to CI
- use --arch-only for docker pre-requisites
- fix .editorconfig for emacs
- add guest-loader for Xen-like hypervisor testing
- move generic-loader docs into manual proper
- move semihosting out of hw/
# gpg: Signature made Wed 10 Mar 2021 15:35:31 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2:
semihosting: Move hw/semihosting/ -> semihosting/
semihosting: Move include/hw/semihosting/ -> include/semihosting/
tests/avocado: add boot_xen tests
docs: add some documentation for the guest-loader
docs: move generic-loader documentation into the main manual
hw/core: implement a guest-loader to support static hypervisor guests
device_tree: add qemu_fdt_setprop_string_array helper
hw/riscv: migrate fdt field to generic MachineState
hw/board: promote fdt from ARM VirtMachineState to MachineState
.editorconfig: update the automatic mode setting for Emacs
tests/docker: Use --arch-only when building Debian cross image
gitlab-ci.yml: Add jobs to test CFI flags
gitlab-ci.yml: Allow custom # of parallel linkers
tests/docker: add a test-tcg for building then running check-tcg
docs/system: add a gentle prompt for the complexity to come
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We want to move the semihosting code out of hw/ in the next patch.
This patch contains the mechanical steps, created using:
$ git mv include/hw/semihosting/ include/
$ sed -i s,hw/semihosting,semihosting, $(git grep -l hw/semihosting)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210226131356.3964782-2-f4bug@amsat.org>
Message-Id: <20210305135451.15427-2-alex.bennee@linaro.org>
TILE-Gx was only implemented in linux-user mode, but support for this CPU
was removed from the upstream Linux kernel in 2018, and it has also been
dropped from glibc, so there is no new Linux development taking place with
this architecture. For running the old binaries, users can simply use older
versions of QEMU.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210224183952.80463-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The primary motivation is to remove a dozen insns along
the fast-path in tb_lookup. As a byproduct, this allows
us to completely remove parallel_cpus.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implementation of Linux user emulation for Hexagon
Some common files modified in addition to new files in linux-user/hexagon
Acked-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-31-git-send-email-tsimpson@quicinc.com>
[rth: Fix termbits.h on review by Laurent]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The real kernel collects _TIF_MTE_ASYNC_FAULT into the current thread's
state on any kernel entry (interrupt, exception etc), and then delivers
the signal in advance of resuming the thread.
This means that while the signal won't be delivered immediately, it will
not be delayed forever -- at minimum it will be delivered after the next
clock interrupt.
We don't have a clock interrupt in linux-user, so we issue a cpu_kick
to signal a return to the main loop at the end of the current TB.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-28-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A proper syndrome is required to fill in the proper si_code.
Use page_get_flags to determine permission vs translation for user-only.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remember the PROT_MTE bit as PAGE_MTE/PAGE_TARGET_2.
Otherwise this does not yet have effect.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These prctl fields are required for the function of MTE.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the prctl bit that controls whether syscalls accept tagged
addresses. See Documentation/arm64/tagged-address-abi.rst in the
linux kernel.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Resolve the untagged address once, using thread_cpu.
Tidy the DEBUG_REMAP code using glib routines.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For copy_*_user, only 0 and -TARGET_EFAULT are returned; no need
to involve abi_long. Use size_t for lengths. Use bool for the
lock_user copy argument. Use ssize_t for target_strlen, because
we can't overflow the host memory space.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210212184902.1251044-19-richard.henderson@linaro.org
[PMM: moved fix for ifdef error to previous commit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These functions are not small, except for unlock_user
without debugging enabled. Move them out of line, and
add missing braces on the way.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210212184902.1251044-18-richard.henderson@linaro.org
[PMM: fixed the sense of an ifdef test in qemu.h]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide both tagged and untagged versions of access_ok.
In a few places use thread_cpu, as the user is several
callees removed from do_syscall1.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The places that use these are better off using untagged
addresses, so do not provide a tagged versions. Rename
to make it clear about the address type.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're currently open-coding the range check in access_ok;
use guest_range_valid when size != 0.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We define target_mmap et al as untagged, so that they can be
used from the binary loaders. Explicitly call cpu_untagged_addr
for munmap, mprotect, mremap syscall entry points.
Add a few comments for the syscalls that are exempted by the
kernel's tagged-address-abi.rst.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use g2h_untagged in contexts that have no cpu, e.g. the binary
loaders that operate before the primary cpu is created. As a
colollary, target_mmap and friends must use untagged addresses,
since they are used by the loaders.
Use g2h_untagged on values returned from target_mmap, as the
kernel never applies a tag itself.
Use g2h_untagged on all pc values. The only current user of
tags, aarch64, removes tags from code addresses upon branch,
so "pc" is always untagged.
Use g2h with the cpu context on hand wherever possible.
Use g2h_untagged in lock_user, which will be updated soon.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These constants are only ever used with access_ok, and friends.
Rather than translating them to PAGE_* bits, let them equal
the PAGE_* bits to begin.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Verify that addr + size - 1 does not wrap around.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is more descriptive than 'unsigned long'.
No functional change, since these match on all linux+bsd hosts.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210212184902.1251044-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Record whether the backing page is anonymous, or if it has file
backing. This will allow us to get close to the Linux AArch64
ABI for MTE, which allows tag memory only on ram-backed VMAs.
The real ABI allows tag memory on files, when those files are
on ram-backed filesystems, such as tmpfs. We will not be able
to implement that in QEMU linux-user.
Thankfully, anonymous memory for malloc arenas is the primary
consumer of this feature, so this restricted version should
still be of use.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This data can be allocated by page_alloc_target_data() and
released by page_set_flags(start, end, prot | PAGE_RESET).
This data will be used to hold tag memory for AArch64 MTE.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Recognise the R5900, which reports itself as MIPS III, as a 64-bit CPU
supporting the n32 ABI.
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <5bea109f0c140da6a821aa7f9705d4b3717e86dc.1541701393.git.noring@nocrew.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These were defined for other platforms but mistakenly left out of mips
and generic, so this commit adds them to the places missing. Then it
makes them be translated in getsockopt.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210204153925.2030606-1-Jason@zx2c4.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The sizeof(struct ifreq) is 40 for 64 bit and 32 for 32 bit architectures.
This structure contains a union of other structures, of which struct ifmap
is the biggest for 64 bit architectures. Calling ioclt(…, SIOCGIFCONF, …)
fills a struct sockaddr of that union, and do_ioctl_ifconf() only considered
that struct sockaddr for the size of the union, which has the same size as
struct ifmap on 32 bit architectures. So do_ioctl_ifconf() assumed a wrong
size of 32 for struct ifreq instead of the correct size of 40 on 64 bit
architectures.
The fix makes do_ioctl_ifconf() handle struct ifmap as the biggest part of
the union, treating struct ifreq with the correct size.
Signed-off-by: Stefan <stefan-guix@vodafonemail.de>
Message-Id: <60AA0765-53DD-43D1-A3D2-75F1778526F6@vodafonemail.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If mremap() is called without the MREMAP_MAYMOVE flag with a start address
just before the end of memory (reserved_va) where new_size would exceed
it (and GUEST_ADDR_MAX), the assert(end - 1 <= GUEST_ADDR_MAX) in
page_set_flags() would trigger.
Add an extra guard to the guest_range_valid() checks to prevent this and
avoid asserting binaries when reserved_va is set.
This meant a bug I was seeing locally now gives the same behaviour
regardless of whether reserved_va is set or not.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <70c46e7b999bafbb01d54bfafd44b420d0b782e9.camel@linuxfoundation.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Some ELF binaries encode the .bss section as an extension of the data
ones by setting the segment p_memsz > p_filesz. Some other binaries take
a different route and encode it as a stand-alone PT_LOAD segment with
p_filesz = 0 and p_memsz > 0.
Both the encodings are actually correct per ELF specification but the
ELF loader had some troubles in handling the former: with the old logic
it was very likely to get Qemu to crash in zero_bss when trying to
access unmapped memory.
zero_bss isn't meant to allocate whole zero-filled segments but to
"complete" a previously mapped segment with the needed zero bits.
The fix is pretty simple, if the segment is completely zero-filled we
simply allocate one or more pages (according to p_memsz) and avoid
calling zero_bss altogether.
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Message-Id: <c9106487-dc4d-120a-bd48-665b3c617287@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
On the hppa target userspace binaries may call signalfd4() and
eventfd2() with an old TARGET_O_NONBLOCK value of 000200004 instead of
000200000 for the "mask" syscall parameter, in which case the current
emulation doesn't handle the translation to the native O_NONBLOCK value
correctly.
The 0x04 bit is not masked out before the new O_NONBLOCK bit is set and
as such when calling the native syscall errors out with EINVAL.
Fix this by introducing TARGET_O_NONBLOCK_MASK which is used to mask off
all possible bits. This define defaults to TARGET_O_NONBLOCK when not
defined otherwise, so for all other targets the implementation will
behave as before.
This patch needs to be applied on top of my previous two patches.
Bug was found and patch was verified by using qemu-hppa as debian buildd
server on x86_64.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210210061214.GA221322@ls3530.fritz.box>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Historically the parisc linux port tried to be compatible with HP-UX
userspace and as such defined the O_NONBLOCK constant to 0200004 to
emulate separate NDELAY & NONBLOCK values.
Since parisc was the only Linux platform which had two bits set, this
produced various userspace issues. Finally it was decided to drop the
(never completed) HP-UX compatibilty, which is why O_NONBLOCK was
changed upstream to only have one bit set in future with this commit:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=75ae04206a4d0e4f541c1d692b7febd1c0fdb814
This patch simply adjusts the value for qemu-user too.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210201220551.GA8015@ls3530.fritz.box>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The hppa and alpha targets miss the #define of the TARGET___O_TMPFILE
and as such fail to run a trivial symlink command like
ln -s /bin/bash /tmp
which results in an -EINVAL return code.
Adding the define fixes the problem.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210201155922.GA18291@ls3530.fritz.box>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When mapping the host waitid status to the target status we previously
just used decoding information in the status value. This doesn't follow
what the waitid documentation describes, which instead suggests using
the si_code value for the decoding. This results in the incorrect values
seen when calling waitid. This is especially apparent on RV32 where all
wait calls use waitid (see the bug case).
This patch just passes the waitid status directly back to the guest.
Buglink: https://bugs.launchpad.net/qemu/+bug/1906193
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Andreas K. Hüttel <dilfridge@gentoo.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1fb2d56aa23a81f4473e638abe9e2d78c09a3d5b.1611080607.git.alistair.francis@wdc.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
64-bit MIPS targets lost setup_frame() during the refactor in commit
8949bef18b. Restore it declaring TARGET_ARCH_HAS_SETUP_FRAME, to be
able to build the o32 ABI target.
Fixes: 8949bef18b ("linux-user: move mips/mips64 signal.c parts to mips directory")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20201119161710.1985083-2-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This will allow us to centralize the registration of
the cpus.c module accelerator operations (in accel/accel-softmmu.c),
and trigger it automatically using object hierarchy lookup from the
new accel_init_interfaces() initialization step, depending just on
which accelerators are available in the code.
Rename all tcg-cpus.c, kvm-cpus.c, etc to tcg-accel-ops.c,
kvm-accel-ops.c, etc, matching the object type names.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-18-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These lock types are unsupported by Linux since v2.2[0][1] and
always return EINVAL (except on SPARC up until v2.6, which just
warned).
musl libc does not define these constants, so just remove them from
the translation cases.
[0] https://github.com/mpe/linux-fullhistory/blob/v2.2.0/fs/locks.c#L322-L324
[1] https://github.com/mpe/linux-fullhistory/blob/v2.2.0/fs/locks.c#L429-L445
Signed-off-by: Michael Forney <mforney@mforney.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210114223602.9004-1-mforney@mforney.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
SOL_UDP manipulate options at UDP level. All six options currently defined
in linux source include/uapi/linux/udp.h take integer values.
Signed-off-by: Shu-Chun Weng <scw@google.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20201218193213.3566856-3-scw@google.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also reorder blocks so that they are all in the same order everywhere.
Signed-off-by: Shu-Chun Weng <scw@google.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20201218193213.3566856-2-scw@google.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This could made testing more easier and ARM/AArch64 has supported on
their linux user mode too, so I think it should be reasonable.
Verified GCC testsuite with newlib/semihosting.
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210107170717.2098982-7-keithp@keithp.com>
Message-Id: <20210108224256.2321-18-alex.bennee@linaro.org>
