This adds the BCM2835 SDHost controller from Arasan.
Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr>
Message-id: 20170224164021.9066-2-clement.deschamps@antfield.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the NVIC SHCSR write behaviour which allows pending and
active status of some exceptions to be changed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Implement the exception return consistency checks
described in the v7M pseudocode ExceptionReturn().
Inspired by a patch from Michael Davidsaver's series, but
this is a reimplementation from scratch based on the
ARM ARM pseudocode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The VECTCLRACTIVE and VECTRESET bits in the AIRCR are both
documented as UNPREDICTABLE if you write a 1 to them when
the processor is not halted in Debug state (ie stopped
and under the control of an external JTAG debugger).
Since we don't implement Debug state or emulated JTAG
these bits are always UNPREDICTABLE for us. Instead of
logging them as unimplemented we can simply log writes
as guest errors and ignore them.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
[PMM: change extracted from another patch; commit message
constructed from scratch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Having armv7m_nvic_acknowledge_irq() return the new value of
env->v7m.exception and its one caller assign the return value
back to env->v7m.exception is pointless. Just make the return
type void instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The v7M exception architecture requires that if a synchronous
exception cannot be taken immediately (because it is disabled
or at too low a priority) then it should be escalated to
HardFault (and the HardFault exception is then taken).
Implement this escalation logic.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
[PMM: extracted from another patch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Now that the NVIC is its own separate implementation, we can
clean up the GIC code by removing REV_NVIC and conditionals
which use it.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The M profile condition for when we can take a pending exception or
interrupt is not the same as that for A/R profile. The code
originally copied from the A/R profile version of the
cpu_exec_interrupt function only worked by chance for the
very simple case of exceptions being masked by PRIMASK.
Replace it with a call to a function in the NVIC code that
correctly compares the priority of the pending exception
against the current execution priority of the CPU.
[Michael Davidsaver's patchset had a patch to do something
similar but the implementation ended up being a rewrite.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Despite some superficial similarities of register layout, the
M-profile NVIC is really very different from the A-profile GIC.
Our current attempt to reuse the GIC code means that we have
significant bugs in our NVIC.
Implement the NVIC as an entirely separate device, to give
us somewhere we can get the behaviour correct.
This initial commit does not attempt to implement exception
priority escalation, since the GIC-based code didn't either.
It does fix a few bugs in passing:
* ICSR.RETTOBASE polarity was wrong and didn't account for
internal exceptions
* ICSR.VECTPENDING was 16 too high if the pending exception
was for an external interrupt
* UsageFault, BusFault and MemFault were not disabled on reset
as they are supposed to be
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
[PMM: reworked, various bugs and stylistic cleanups]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Add a state field for the v7M PRIGROUP register and implent
reading and writing it. The current NVIC doesn't honour
the values written, but the new version will.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Rename the nvic_state struct to NVICState, to match
our naming conventions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The i.MX timer device can be reset by writing to the SWR bit
of the CR register. This has to behave differently from hard
(power-on) reset because it does not reset all of the bits
in the CR register.
We were incorrectly implementing soft reset and hard reset
the same way, and in addition had a logic error which meant
that we were clearing the bits that soft-reset is supposed
to preserve and not touching the bits that soft-reset clears.
This was not correct behaviour for either kind of reset.
Separate out the soft reset and hard reset code paths, and
correct the handling of reset of the CR register so that it
is correct in both cases.
Signed-off-by: Kurban Mallachiev <mallachiev@ispras.ru>
[PMM: rephrased commit message, spacing on operators;
use bool rather than int for is_soft_reset]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In 2.9 ITS will block save/restore and migration use cases. As such,
let's introduce a user option that allows to turn its instantiation
off, along with GICv3. With the "its" option turned false, migration
will be possible, obviously at the expense of MSI support (with GICv3).
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1487681108-14452-1-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
object_new(FOO) returns an object with ref_cnt == 1
and following
object_property_set_bool(cpuobj, true, "realized", NULL)
set parent of cpuobj to '/machine/unattached' which makes
ref_cnt == 2.
Since machvirt_init() doesn't take ownership of cpuobj
returned by object_new() it should explicitly drop
reference to cpuobj when dangling pointer is about to
go out of scope like it's done pc_new_cpu() to avoid
object leak.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1487253461-269218-1-git-send-email-imammedo@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In SDHCI protocol, the 'Block count enable' bit of the Transfer
Mode register is relevant only in multi block transfers. We need
not check it in single block transfers.
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 20170214185225.7994-5-ppandit@redhat.com
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In sdhci_write invoke multi block transfer if it is enabled
in the transfer mode register 's->trnmod'.
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 20170214185225.7994-4-ppandit@redhat.com
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the SDHCI protocol, the transfer mode register value
is used during multi block transfer to check if block count
register is enabled and should be updated. Transfer mode
register could be set such that, block count register would
not be updated, thus leading to an infinite loop. Add check
to avoid it.
Reported-by: Wjjzhang <wjjzhang@tencent.com>
Reported-by: Jiang Xin <jiangxin1@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 20170214185225.7994-3-ppandit@redhat.com
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In SDHCI protocol, the transfer mode register is defined
to be of 6 bits. Mask its value with '0x0037' so that an
invalid value could not be assigned.
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20170214185225.7994-2-ppandit@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switch to using qcrypto_random_bytes() rather than rand() as
our source of randomness for the BCM2835 RNG.
If qcrypto_random_bytes() fails, we don't want to return the guest a
non-random value in case they're really using it for cryptographic
purposes, so the best we can do is a fatal error. This shouldn't
happen unless something's broken, though.
In theory we could implement this device's full FIFO and interrupt
semantics and then just stop filling the FIFO. That's a lot of work,
though, and doesn't really give a very nice diagnostic to the user
since the guest will just seem to hang.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Recent vanilla Raspberry Pi kernels started to make use of
the hardware random number generator in BCM2835 SoC. As a
result, those kernels wouldn't work anymore under QEMU
but rather just freeze during the boot process.
This patch implements a trivial BCM2835 compatible RNG,
and adds it as a peripheral to BCM2835 platform, which
allows to boot a vanilla Raspberry Pi kernel under Qemu.
Changes since v1:
* Prevented guest from writing [31..20] bits in rng_status
* Removed redundant minimum_version_id_old
* Added field entries for the state
* Changed realize function to reset
Signed-off-by: Marcin Chojnacki <marcinch7@gmail.com>
Message-id: 20170210210857.47893-1-marcinch7@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit a3a3d8c7 introduced a segfault bug while checking for
'dc->vmsd->unmigratable' which caused QEMU to crash when trying to add
devices which do no set their 'dc->vmsd' yet while initialization.
Place a 'dc->vmsd' check prior to it so that we do not segfault for
such devices.
NOTE: This doesn't compromise the functioning of --only-migratable
option as all the unmigratable devices do set their 'dc->vmsd'.
Introduce a new function check_migratable() and move the
only_migratable check inside it, also use stubs to avoid user-mode qemu
build failures.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1487009088-23891-1-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Load the network boot image into guest RAM when the boot
device selected is a network device. Use some of the reserved
space in IplBlockCcw to store the start address of the netboot
image.
A user could also use 'chreipl'(diag 308/5) to change the boot device.
So every time we update the IPLB, we need to verify if the selected
boot device is a network device so we can appropriately load the
network boot image.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add new field to S390IPLState to store the name of the network boot
loader.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The current QEMU ROM infrastructure rejects late loading of ROMs.
And ELFs are currently loaded as ROM, this prevents delayed loading
of ELFs. So when loading ELF, allow the user to specify if ELF should
be loaded as ROM or not.
If an ELF is not loaded as ROM, then they are not restored on a
guest reboot/reset and so its upto the user to handle the reloading.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Now that the all callbacks have been converted to use "at" syscalls, we
can drop this code.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_open2() callback is vulnerable to symlink attacks because it
calls:
(1) open() which follows symbolic links for all path elements but the
rightmost one
(2) local_set_xattr()->setxattr() which follows symbolic links for all
path elements
(3) local_set_mapped_file_attr() which calls in turn local_fopen() and
mkdir(), both functions following symbolic links for all path
elements but the rightmost one
(4) local_post_create_passthrough() which calls in turn lchown() and
chmod(), both functions also following symbolic links
This patch converts local_open2() to rely on opendir_nofollow() and
mkdirat() to fix (1), as well as local_set_xattrat(),
local_set_mapped_file_attrat() and local_set_cred_passthrough() to
fix (2), (3) and (4) respectively. Since local_open2() already opens
a descriptor to the target file, local_set_cred_passthrough() is
modified to reuse it instead of opening a new one.
The mapped and mapped-file security modes are supposed to be identical,
except for the place where credentials and file modes are stored. While
here, we also make that explicit by sharing the call to openat().
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_mkdir() callback is vulnerable to symlink attacks because it
calls:
(1) mkdir() which follows symbolic links for all path elements but the
rightmost one
(2) local_set_xattr()->setxattr() which follows symbolic links for all
path elements
(3) local_set_mapped_file_attr() which calls in turn local_fopen() and
mkdir(), both functions following symbolic links for all path
elements but the rightmost one
(4) local_post_create_passthrough() which calls in turn lchown() and
chmod(), both functions also following symbolic links
This patch converts local_mkdir() to rely on opendir_nofollow() and
mkdirat() to fix (1), as well as local_set_xattrat(),
local_set_mapped_file_attrat() and local_set_cred_passthrough() to
fix (2), (3) and (4) respectively.
The mapped and mapped-file security modes are supposed to be identical,
except for the place where credentials and file modes are stored. While
here, we also make that explicit by sharing the call to mkdirat().
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_mknod() callback is vulnerable to symlink attacks because it
calls:
(1) mknod() which follows symbolic links for all path elements but the
rightmost one
(2) local_set_xattr()->setxattr() which follows symbolic links for all
path elements
(3) local_set_mapped_file_attr() which calls in turn local_fopen() and
mkdir(), both functions following symbolic links for all path
elements but the rightmost one
(4) local_post_create_passthrough() which calls in turn lchown() and
chmod(), both functions also following symbolic links
This patch converts local_mknod() to rely on opendir_nofollow() and
mknodat() to fix (1), as well as local_set_xattrat() and
local_set_mapped_file_attrat() to fix (2) and (3) respectively.
A new local_set_cred_passthrough() helper based on fchownat() and
fchmodat_nofollow() is introduced as a replacement to
local_post_create_passthrough() to fix (4).
The mapped and mapped-file security modes are supposed to be identical,
except for the place where credentials and file modes are stored. While
here, we also make that explicit by sharing the call to mknodat().
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_symlink() callback is vulnerable to symlink attacks because it
calls:
(1) symlink() which follows symbolic links for all path elements but the
rightmost one
(2) open(O_NOFOLLOW) which follows symbolic links for all path elements but
the rightmost one
(3) local_set_xattr()->setxattr() which follows symbolic links for all
path elements
(4) local_set_mapped_file_attr() which calls in turn local_fopen() and
mkdir(), both functions following symbolic links for all path
elements but the rightmost one
This patch converts local_symlink() to rely on opendir_nofollow() and
symlinkat() to fix (1), openat(O_NOFOLLOW) to fix (2), as well as
local_set_xattrat() and local_set_mapped_file_attrat() to fix (3) and
(4) respectively.
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_chown() callback is vulnerable to symlink attacks because it
calls:
(1) lchown() which follows symbolic links for all path elements but the
rightmost one
(2) local_set_xattr()->setxattr() which follows symbolic links for all
path elements
(3) local_set_mapped_file_attr() which calls in turn local_fopen() and
mkdir(), both functions following symbolic links for all path
elements but the rightmost one
This patch converts local_chown() to rely on open_nofollow() and
fchownat() to fix (1), as well as local_set_xattrat() and
local_set_mapped_file_attrat() to fix (2) and (3) respectively.
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_chmod() callback is vulnerable to symlink attacks because it
calls:
(1) chmod() which follows symbolic links for all path elements
(2) local_set_xattr()->setxattr() which follows symbolic links for all
path elements
(3) local_set_mapped_file_attr() which calls in turn local_fopen() and
mkdir(), both functions following symbolic links for all path
elements but the rightmost one
We would need fchmodat() to implement AT_SYMLINK_NOFOLLOW to fix (1). This
isn't the case on linux unfortunately: the kernel doesn't even have a flags
argument to the syscall :-\ It is impossible to fix it in userspace in
a race-free manner. This patch hence converts local_chmod() to rely on
open_nofollow() and fchmod(). This fixes the vulnerability but introduces
a limitation: the target file must readable and/or writable for the call
to openat() to succeed.
It introduces a local_set_xattrat() replacement to local_set_xattr()
based on fsetxattrat() to fix (2), and a local_set_mapped_file_attrat()
replacement to local_set_mapped_file_attr() based on local_fopenat()
and mkdirat() to fix (3). No effort is made to factor out code because
both local_set_xattr() and local_set_mapped_file_attr() will be dropped
when all users have been converted to use the "at" versions.
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_link() callback is vulnerable to symlink attacks because it calls:
(1) link() which follows symbolic links for all path elements but the
rightmost one
(2) local_create_mapped_attr_dir()->mkdir() which follows symbolic links
for all path elements but the rightmost one
This patch converts local_link() to rely on opendir_nofollow() and linkat()
to fix (1), mkdirat() to fix (2).
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
When using the mapped-file security model, we also have to create a link
for the metadata file if it exists. In case of failure, we should rollback.
That's what this patch does.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_rename() callback is vulnerable to symlink attacks because it
uses rename() which follows symbolic links in all path elements but the
rightmost one.
This patch simply transforms local_rename() into a wrapper around
local_renameat() which is symlink-attack safe.
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_renameat() callback is currently a wrapper around local_rename()
which is vulnerable to symlink attacks.
This patch rewrites local_renameat() to have its own implementation, based
on local_opendir_nofollow() and renameat().
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_lstat() callback is vulnerable to symlink attacks because it
calls:
(1) lstat() which follows symbolic links in all path elements but the
rightmost one
(2) getxattr() which follows symbolic links in all path elements
(3) local_mapped_file_attr()->local_fopen()->openat(O_NOFOLLOW) which
follows symbolic links in all path elements but the rightmost
one
This patch converts local_lstat() to rely on opendir_nofollow() and
fstatat(AT_SYMLINK_NOFOLLOW) to fix (1), fgetxattrat_nofollow() to
fix (2).
A new local_fopenat() helper is introduced as a replacement to
local_fopen() to fix (3). No effort is made to factor out code
because local_fopen() will be dropped when all users have been
converted to call local_fopenat().
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_readlink() callback is vulnerable to symlink attacks because it
calls:
(1) open(O_NOFOLLOW) which follows symbolic links for all path elements but
the rightmost one
(2) readlink() which follows symbolic links for all path elements but the
rightmost one
This patch converts local_readlink() to rely on open_nofollow() to fix (1)
and opendir_nofollow(), readlinkat() to fix (2).
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_truncate() callback is vulnerable to symlink attacks because
it calls truncate() which follows symbolic links in all path elements.
This patch converts local_truncate() to rely on open_nofollow() and
ftruncate() instead.
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_statfs() callback is vulnerable to symlink attacks because it
calls statfs() which follows symbolic links in all path elements.
This patch converts local_statfs() to rely on open_nofollow() and fstatfs()
instead.
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_utimensat() callback is vulnerable to symlink attacks because it
calls qemu_utimens()->utimensat(AT_SYMLINK_NOFOLLOW) which follows symbolic
links in all path elements but the rightmost one or qemu_utimens()->utimes()
which follows symbolic links for all path elements.
This patch converts local_utimensat() to rely on opendir_nofollow() and
utimensat(AT_SYMLINK_NOFOLLOW) directly instead of using qemu_utimens().
It is hence assumed that the OS supports utimensat(), i.e. has glibc 2.6
or higher and linux 2.6.22 or higher, which seems reasonable nowadays.
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_remove() callback is vulnerable to symlink attacks because it
calls:
(1) lstat() which follows symbolic links in all path elements but the
rightmost one
(2) remove() which follows symbolic links in all path elements but the
rightmost one
This patch converts local_remove() to rely on opendir_nofollow(),
fstatat(AT_SYMLINK_NOFOLLOW) to fix (1) and unlinkat() to fix (2).
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_unlinkat() callback is vulnerable to symlink attacks because it
calls remove() which follows symbolic links in all path elements but the
rightmost one.
This patch converts local_unlinkat() to rely on opendir_nofollow() and
unlinkat() instead.
Most of the code is moved to a separate local_unlinkat_common() helper
which will be reused in a subsequent patch to fix the same issue in
local_remove().
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_lremovexattr() callback is vulnerable to symlink attacks because
it calls lremovexattr() which follows symbolic links in all path elements
but the rightmost one.
This patch introduces a helper to emulate the non-existing fremovexattrat()
function: it is implemented with /proc/self/fd which provides a trusted
path that can be safely passed to lremovexattr().
local_lremovexattr() is converted to use this helper and opendir_nofollow().
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_lsetxattr() callback is vulnerable to symlink attacks because
it calls lsetxattr() which follows symbolic links in all path elements but
the rightmost one.
This patch introduces a helper to emulate the non-existing fsetxattrat()
function: it is implemented with /proc/self/fd which provides a trusted
path that can be safely passed to lsetxattr().
local_lsetxattr() is converted to use this helper and opendir_nofollow().
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_llistxattr() callback is vulnerable to symlink attacks because
it calls llistxattr() which follows symbolic links in all path elements but
the rightmost one.
This patch introduces a helper to emulate the non-existing flistxattrat()
function: it is implemented with /proc/self/fd which provides a trusted
path that can be safely passed to llistxattr().
local_llistxattr() is converted to use this helper and opendir_nofollow().
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_lgetxattr() callback is vulnerable to symlink attacks because
it calls lgetxattr() which follows symbolic links in all path elements but
the rightmost one.
This patch introduces a helper to emulate the non-existing fgetxattrat()
function: it is implemented with /proc/self/fd which provides a trusted
path that can be safely passed to lgetxattr().
local_lgetxattr() is converted to use this helper and opendir_nofollow().
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The local_open() and local_opendir() callbacks are vulnerable to symlink
attacks because they call:
(1) open(O_NOFOLLOW) which follows symbolic links in all path elements but
the rightmost one
(2) opendir() which follows symbolic links in all path elements
This patch converts both callbacks to use new helpers based on
openat_nofollow() to only open files and directories if they are
below the virtfs shared folder
This partly fixes CVE-2016-9602.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch opens the shared folder and caches the file descriptor, so that
it can be used to do symlink-safe path walk.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
When using the passthrough security mode, symbolic links created by the
guest are actual symbolic links on the host file system.
Since the resolution of symbolic links during path walk is supposed to
occur on the client side. The server should hence never receive any path
pointing to an actual symbolic link. This isn't guaranteed by the protocol
though, and malicious code in the guest can trick the server to issue
various syscalls on paths whose one or more elements are symbolic links.
In the case of the "local" backend using the "passthrough" or "none"
security modes, the guest can directly create symbolic links to arbitrary
locations on the host (as per spec). The "mapped-xattr" and "mapped-file"
security modes are also affected to a lesser extent as they require some
help from an external entity to create actual symbolic links on the host,
i.e. another guest using "passthrough" mode for example.
The current code hence relies on O_NOFOLLOW and "l*()" variants of system
calls. Unfortunately, this only applies to the rightmost path component.
A guest could maliciously replace any component in a trusted path with a
symbolic link. This could allow any guest to escape a virtfs shared folder.
This patch introduces a variant of the openat() syscall that successively
opens each path element with O_NOFOLLOW. When passing a file descriptor
pointing to a trusted directory, one is guaranteed to be returned a
file descriptor pointing to a path which is beneath the trusted directory.
This will be used by subsequent patches to implement symlink-safe path walk
for any access to the backend.
Symbolic links aren't the only threats actually: a malicious guest could
change a path element to point to other types of file with undesirable
effects:
- a named pipe or any other thing that would cause openat() to block
- a terminal device which would become QEMU's controlling terminal
These issues can be addressed with O_NONBLOCK and O_NOCTTY.
Two helpers are introduced: one to open intermediate path elements and one
to open the rightmost path element.
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(renamed openat_nofollow() to relative_openat_nofollow(),
assert path is relative and doesn't contain '//',
fixed side-effect in assert, Greg Kurz)
Signed-off-by: Greg Kurz <groug@kaod.org>
If these functions fail, they should not change *fs. Let's use local
variables to fix this.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
These functions are always called indirectly. It really doesn't make sense
for them to sit in a header file.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This patchset adds the throttle support for the 9p-local driver.
For now this functionality can be enabled only through qemu cli options.
QMP interface and support to other drivers need further extensions.
To make it simple for other 9p drivers, the throttle code has been put in
separate files.
Signed-off-by: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
(pass extra NULL CoMutex * argument to qemu_co_queue_wait(),
added options to qemu-options.hx, Greg Kurz)
Signed-off-by: Greg Kurz <groug@kaod.org>
In this case, we are marshaling an error status instead of the errno value.
Reorganize the out and out_nofid labels to look like all the other cases.
Coverity reports this because the "err = -ENOENT" and "err = -EINVAL"
assignments above are dead, overwritten by the call to pdu_marshal.
(Coverity issues CID1348512 and CID1348513)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(also open-coded the success path since locking is a nop for us, Greg Kurz)
Signed-off-by: Greg Kurz <groug@kaod.org>
Don't truncate the multiplication and do a 64 bit one instead
because the result is stored in a 64 bit variable.
This fixes a similar coverity warning to commits 237a8650d6 and
4382fa6554, in a similar way, and is the final third of the fix for
coverity CID 1167561 (hopefully!).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The register_read() and register_write() functions expect a bitmask argument.
To avoid duplicated code, a new inlined function register_enabled_mask() is
introduced.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The "qemu,register" device needs to be wired up in source code, there
is no way the user can make any real use of this device with the
"-device" parameter or the "device_add" monitor command yet.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The "or-irq" device needs to be wired up in source code, there is no
way the user can make any real use of this device with the "-device"
parameter or the "device_add" monitor command yet.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We'll add a variant which accepts dmabufs soon. Change
the name so we can easily disturgish the two variants.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1487669841-13668-2-git-send-email-kraxel@redhat.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJYs072AAoJEDNgw/dBGhJfJNMH/iPNHzrZLRilU6CceYpNQW1Z
262rITUXBZ04vVhNjdIU6OZDjD12eY67eznfapsNNJPSNNR7UUMa8dymFZfBxgRL
Kl9jciJKhWUBdzn8qkvP2umXA9I6NZs+OJbSz8vIYVEX8mF8EaYNLGP40J+4qc+X
2GByZRu5yoYe5Ex1hNgdzPGPlyvJwymu0y7WW0gDPCrKtSSGz7NRGA9S2dvbFGQb
kNnkkS2aEkbt8fDWsTkcKVog3jFNfBzdEYUJel237+dMqnepFt5V1UWFANznb7Xp
pmdOWYhWntvi8ONwJW+RRWe4Mes2ySfqelmVD602dreuIRkX1bHBWkXA3S8pSmM=
=2VrG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/artyom/tags/pull-sun4v-20170226' into staging
Pull request for Niagara patches 2017 02 26
# gpg: Signature made Sun 26 Feb 2017 21:56:06 GMT
# gpg: using RSA key 0x3360C3F7411A125F
# gpg: Good signature from "Artyom Tarasenko <atar4qemu@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2AD8 6149 17F4 B2D7 05C0 BB12 3360 C3F7 411A 125F
* remotes/artyom/tags/pull-sun4v-20170226:
niagara: check if a serial port is available
niagara: fail if a firmware file is missing
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
fail if a firmware file is missing and not qtest_enabled(),
the later is necessary to allow some basic tests if
firmware is not available
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
CHanges:
* Add the Boston board with fixing the make check issue on 32-bit hosts.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)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=xOs6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/yongbok/tags/mips-20170224-2' into staging
MIPS patches 2017-02-24-2
CHanges:
* Add the Boston board with fixing the make check issue on 32-bit hosts.
# gpg: Signature made Fri 24 Feb 2017 11:43:45 GMT
# gpg: using RSA key 0x2238EB86D5F797C2
# gpg: Good signature from "Yongbok Kim <yongbok.kim@imgtec.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 8600 4CF5 3415 A5D9 4CFA 2B5C 2238 EB86 D5F7 97C2
* remotes/yongbok/tags/mips-20170224-2:
hw/mips: MIPS Boston board support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- cleanups, fixes and improvements
- program check loop detection (useful with the corresponding kernel
patch)
- wire up virtio-crypto for ccw
- and finally support many virtqueues for virtio-ccw
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uM3N
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20170224' into staging
A selection of s390x patches:
- cleanups, fixes and improvements
- program check loop detection (useful with the corresponding kernel
patch)
- wire up virtio-crypto for ccw
- and finally support many virtqueues for virtio-ccw
# gpg: Signature made Fri 24 Feb 2017 09:19:19 GMT
# gpg: using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20170224:
s390x/css: handle format-0 TIC CCW correctly
s390x/arch_dump: pass cpuid into notes sections
s390x/arch_dump: use proper note name and note size
virtio-ccw: support VIRTIO_QUEUE_MAX virtqueues
s390x: bump ADAPTER_ROUTES_MAX_GSI
virtio-ccw: check flic->adapter_routes_max_batch
s390x: add property adapter_routes_max_batch
virtio-ccw: Check the number of vqs in CCW_CMD_SET_IND
virtio-ccw: add virtio-crypto-ccw device
virtio-ccw: handle virtio 1 only devices
s390x/flic: fail migration on source already
s390x/kvm: detect some program check loops
s390x/s390-virtio: get rid of DPRINTF
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=o8eA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-util-2017-02-23' into staging
option cutils: Fix and clean up number conversions
# gpg: Signature made Thu 23 Feb 2017 19:41:17 GMT
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-util-2017-02-23: (24 commits)
option: Fix checking of sizes for overflow and trailing crap
util/cutils: Change qemu_strtosz*() from int64_t to uint64_t
util/cutils: Return qemu_strtosz*() error and value separately
util/cutils: Let qemu_strtosz*() optionally reject trailing crap
qemu-img: Wrap cvtnum() around qemu_strtosz()
test-cutils: Drop suffix from test_qemu_strtosz_simple()
test-cutils: Use qemu_strtosz() more often
util/cutils: Drop QEMU_STRTOSZ_DEFSUFFIX_* macros
util/cutils: New qemu_strtosz()
util/cutils: Rename qemu_strtosz() to qemu_strtosz_MiB()
util/cutils: New qemu_strtosz_metric()
test-cutils: Cover qemu_strtosz() around range limits
test-cutils: Cover qemu_strtosz() with trailing crap
test-cutils: Cover qemu_strtosz() invalid input
test-cutils: Add missing qemu_strtosz()... endptr checks
option: Fix to reject invalid and overflowing numbers
util/cutils: Clean up control flow around qemu_strtol() a bit
util/cutils: Clean up variable names around qemu_strtol()
util/cutils: Rename qemu_strtoll(), qemu_strtoull()
util/cutils: Rewrite documentation of qemu_strtol() & friends
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CIRRUS_BLTMODE_MEMSYSSRC blits do NOT check blit destination
and blit width, at all. Oops. Fix it.
Security impact: high.
The missing blit destination check allows to write to host memory.
Basically same as CVE-2014-8106 for the other blit variants.
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Introduce support for emulating the MIPS Boston development board. The
Boston board is built around an FPGA & 3 PCIe controllers, one of which
is connected to an Intel EG20T Platform Controller Hub. It is used
during the development & debug of new CPUs and the software intended to
run on them, and is essentially the successor to the older MIPS Malta
board.
This patch does not implement the EG20T, instead connecting an already
supported ICH-9 AHCI controller. Whilst this isn't accurate it's enough
for typical stock Boston software (eg. Linux kernels) to work with hard
disks given that both the ICH-9 & EG20T implement the AHCI
specification.
Boston boards typically boot kernels in the FIT image format, and this
patch will treat kernels provided to QEMU as such. When loading a kernel
directly, the board code will generate minimal firmware much as the
Malta board code does. This firmware will set up the CM, CPC & GIC
register base addresses then set argument registers & jump to the kernel
entry point. Alternatively, bootloader code may be loaded using the bios
argument in which case no firmware will be generated & execution will
proceed from the start of the boot code at the default MIPS boot
exception vector (offset 0x1fc00000 into (c)kseg1).
Currently real Boston boards are always used with FPGA bitfiles that
include a Global Interrupt Controller (GIC), so the interrupt
configuration is only defined for such cases. Therefore the board will
only allow use of CPUs which implement the CPS components, including the
GIC, and will otherwise exit with a message.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
[yongbok.kim@imgtec.com:
isolated boston machine support for mips64el.
updated for recent Chardev changes.
ignore missing bios/kernel for qtest.
added default -drive to if=ide explicitly.
changed default memory size into 1G due to make check failure
on 32-bit hosts]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
The arm_reset_cpu/set_cpu_on/set_cpu_off() functions do their work
asynchronously in the target vCPUs context. As a result we need to
ensure the SRC_SCR reset bits correctly report the reset status at the
right time. To do this we defer the clearing of the bit with an async
job which will run after the work queued by ARM powerctl functions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
This finally allows TCG to benefit from the iothread introduction: Drop
the global mutex while running pure TCG CPU code. Reacquire the lock
when entering MMIO or PIO emulation, or when leaving the TCG loop.
We have to revert a few optimization for the current TCG threading
model, namely kicking the TCG thread in qemu_mutex_lock_iothread and not
kicking it in qemu_cpu_kick. We also need to disable RAM block
reordering until we have a more efficient locking mechanism at hand.
Still, a Linux x86 UP guest and my Musicpal ARM model boot fine here.
These numbers demonstrate where we gain something:
20338 jan 20 0 331m 75m 6904 R 99 0.9 0:50.95 qemu-system-arm
20337 jan 20 0 331m 75m 6904 S 20 0.9 0:26.50 qemu-system-arm
The guest CPU was fully loaded, but the iothread could still run mostly
independent on a second core. Without the patch we don't get beyond
32206 jan 20 0 330m 73m 7036 R 82 0.9 1:06.00 qemu-system-arm
32204 jan 20 0 330m 73m 7036 S 21 0.9 0:17.03 qemu-system-arm
We don't benefit significantly, though, when the guest is not fully
loading a host CPU.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <1439220437-23957-10-git-send-email-fred.konrad@greensocs.com>
[FK: Rebase, fix qemu_devices_reset deadlock, rm address_space_* mutex]
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[EGC: fixed iothread lock for cpu-exec IRQ handling]
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: -smp single-threaded fix, clean commit msg, BQL fixes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
[PM: target-arm changes]
Acked-by: Peter Maydell <peter.maydell@linaro.org>
This pull request has:
* Yet more POWER9 instruction implementations
* Some extensions to the softfloat code which are necesssary for
some of those instructions
* Some preliminary patches in preparation for POWER9 softmmu
implementation
* Igor Mammedov's cleanups to unify hotplug cpu handling across
architectures
* Assorted bugfixes
The softfloat and cpu hotplug changes aren't entirely ppc specific (in
fact the hotplug stuff contains some pc specific patches). However
they're included here because ppc is one of the main beneficiaries,
and the series depend on some ppc specific patches.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=bsJJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170222' into staging
ppc patch queue for 2017-02-22
This pull request has:
* Yet more POWER9 instruction implementations
* Some extensions to the softfloat code which are necesssary for
some of those instructions
* Some preliminary patches in preparation for POWER9 softmmu
implementation
* Igor Mammedov's cleanups to unify hotplug cpu handling across
architectures
* Assorted bugfixes
The softfloat and cpu hotplug changes aren't entirely ppc specific (in
fact the hotplug stuff contains some pc specific patches). However
they're included here because ppc is one of the main beneficiaries,
and the series depend on some ppc specific patches.
# gpg: Signature made Wed 22 Feb 2017 06:29:47 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.9-20170222: (43 commits)
hw/ppc/ppc405_uc.c: Avoid integer overflows
hw/ppc/spapr: Check for valid page size when hot plugging memory
target-ppc: fix Book-E TLB matching
hw/net/spapr_llan: 6 byte mac address device tree entry
machine: replace query_hotpluggable_cpus() callback with has_hotpluggable_cpus flag
machine: unify [pc_|spapr_]query_hotpluggable_cpus() callbacks
spapr: reuse machine->possible_cpus instead of cores[]
change CPUArchId.cpu type to Object*
pc: pass apic_id to pc_find_cpu_slot() directly so lookup could be done without CPU object
pc: calculate topology only once when possible_cpus is initialised
pc: move pcms->possible_cpus init out of pc_cpus_init()
machine: move possible_cpus to MachineState
hw/pci-host/prep: Do not use hw_error() in realize function
target/ppc/POWER9: Direct all instr and data storage interrupts to the hypv
target/ppc/POWER9: Adapt LPCR handling for POWER9
target/ppc/POWER9: Add ISAv3.00 MMU definition
target/ppc: Fix LPCR DPFD mask define
target-ppc: Add xscvqpudz and xscvqpuwz instructions
target-ppc: Implement round to odd variants of quad FP instructions
softfloat: Add float128_to_uint32_round_to_zero()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For TIC CCW, bit positions 8-32 of the format-1 CCW must contain zeros;
otherwise, a program-check condition is generated. For format-0 TIC CCWs,
bits 32-63 are ignored.
To convert TIC from format-0 CCW to format-1 CCW correctly, let's clear
bits 8-32 to guarantee compatibility.
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The maximal number of virtqueues per device can be limited on a per
transport basis. For virtio-ccw this limit is defined by
VIRTIO_CCW_QUEUE_MAX, however the limitation used to come form the
number of adapter routes supported by flic (via notifiers).
Recently the limitation of the flic was adjusted so that it can
accommodate VIRTIO_QUEUE_MAX queues, and is in the meanwhile checked for
separately too.
Let us remove the transport specific limitation of virtio-ccw by
dropping VIRTIO_CCW_QUEUE_MAX and using VIRTIO_QUEUE_MAX instead.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's increase ADAPTER_ROUTES_MAX_GSI to VIRTIO_QUEUE_MAX which is the
largest demand foreseeable at the moment. Let us add a compatibility
macro for the previous machines so client code can maintain backwards
migration compatibility
To not mess up migration compatibility for virtio-ccw
VIRTIO_CCW_QUEUE_MAX is left at it's current value, and will be dropped
when virtio-ccw is converted to use the capability of the flic
introduced by this patch.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Currently VIRTIO_CCW_QUEUE_MAX is defined as ADAPTER_ROUTES_MAX_GSI.
That is when checking queue max we implicitly check the constraint
concerning the number of adapter routes. This won't be satisfactory any
more (due to backward migration considerations) if ADAPTER_ROUTES_MAX_GSI
changes (ADAPTER_ROUTES_MAX_GSI is going to change because we want to
support up to VIRTIO_QUEUE_MAX queues per virtio-ccw device).
Let us introduce a check on a recently introduce flic property which
gives us the compatibility machine aware limit on adapter routes.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
To make virtio-ccw supports more that 64 virtqueues we will have to
increase ADAPTER_ROUTES_MAX_GSI which is currently limiting the number if
possible adapter routes. Of course increasing the number of supported
routes can break backwards migration.
Let us introduce a compatibility property adapter_routes_max_batch so
client code can use the some old limit if in compatibility mode and
retain the migration compatibility.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We cannot support more than 64 virtqueues with the 64 bits provided by
classic indicators. If a driver tries to setup classic indicators
(which it is free to do even for virtio-1 devices) for a device with
more than 64 virtqueues, we should reject the attempt so that the
driver does not end up with an unusable device.
This is in preparation for bumping the number of supported virtqueues
on the ccw transport.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Wire up virtio-crypto for the CCW based VIRTIO.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
As a preparation for wiring-up virtio-crypto, the first non-transitional
virtio device on the ccw transport, let us introduce a mechanism for
disabling revision 0. This is more or less equivalent with disabling
legacy as revision 0 is legacy only, and legacy drivers use the revision
0 exclusively.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Current code puts a 'FLIC_FAILED' marker into the migration stream
to indicate something went wrong while saving flic state and fails
load if it encounters that marker. VMState's put routine recently
gained the ability to return error codes (but did not wire it up
yet).
In order to be able to reap the benefits of returning an error and
failing migration on the source already once this gets wired up
in core, return an error in addition to storing 'FLIC_FAILED'.
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
The DPRINTF approach is likely to introduce bitrot, and the preferred
way for debugging is tracing anyway. Fortunately, there are no users
(left), so nuke it.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This will permit its use in parse_option_size().
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core)
Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core)
Cc: qemu-block@nongnu.org (open list:Block layer core)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1487708048-2131-24-git-send-email-armbru@redhat.com>
This makes qemu_strtosz(), qemu_strtosz_mebi() and
qemu_strtosz_metric() similar to qemu_strtoi64(), except negative
values are rejected.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core)
Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core)
Cc: qemu-block@nongnu.org (open list:Block layer core)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1487708048-2131-23-git-send-email-armbru@redhat.com>
Change the qemu_strtosz() & friends to return -EINVAL when @endptr is
null and the conversion doesn't consume the string completely.
Matches how qemu_strtol() & friends work.
Only test_qemu_strtosz_simple() passes a null @endptr. No functional
change there, because its conversion consumes the string.
Simplify callers that use @endptr only to fail when it doesn't point
to '\0' to pass a null @endptr instead.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core)
Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core)
Cc: qemu-block@nongnu.org (open list:Block layer core)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1487708048-2131-22-git-send-email-armbru@redhat.com>
With qemu_strtosz(), no suffix means mebibytes. It's used rarely.
I'm going to add a similar function where no suffix means bytes.
Rename qemu_strtosz() to qemu_strtosz_MiB() to make the name
qemu_strtosz() available for the new function.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-16-git-send-email-armbru@redhat.com>
Xtensa core may have a number of RAM and ROM areas configured. Record
their size and location from the core configuration overlay and
instantiate them as RAM regions in the SIM machine.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This reverts commit d3473e147a.
This commit creates a board which defaults to having 2GB of RAM.
Unfortunately on 32-bit hosts we can't create boards with 2GB of RAM,
and so 'make check' fails. I missed this during testing of the
merge, unfortunately. Luckily the offending commit is the last
one in the merge request, so we can just revert it for now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split xhci properties into common and nec specific.
Move the backward compat flags to nec, so the new qemu-xhci
devices doesn't carry on the compatibiity stuff.
Move the msi/msix switches too and just enable msix for qemu-xhci.
Also move the intrs and slots properties. Wasn't a great idea to
make them configurable in the first place, nobody needs this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1487663432-10410-1-git-send-email-kraxel@redhat.com
It should return 1 if an error occurs when reading td.
This will avoid an infinite loop issue in ohci_service_ed_list.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1487760990-115925-1-git-send-email-liqiang6-s@360.cn
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Curiously, unrealize() is not being used, but it seems more
appropriate than handle_destroy() together with realize(). It is more
ubiquitous destroy name in qemu code base and may throw errors.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170221141451.28305-25-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Regardless of running in UPT or legacy mode, the guest igd
drivers may attempt to use stolen memory, however only legacy
mode has BIOS support for reserving stolen memmory in the
guest VM. We zero out the stolen memory size in all cases,
then guest igd driver won't use stolen memory.
In legacy mode, user could use x-igd-gms option to specify the
amount of stolen memory which will be pre-allocated and reserved
by bios for igd use.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99028https://bugs.freedesktop.org/show_bug.cgi?id=99025
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Since commit 4bb571d857 ("pci/pcie: don't assume cap id 0 is
reserved") removes the internal use of extended capability ID 0, the
comment here becomes invalid. However, peeling back the onion, the
code is still correct and we still can't seed the capability chain
with ID 0, unless we want to muck with using the version number to
force the header to be non-zero, which is much uglier to deal with.
The comment also now covers some of the subtleties of using cap ID 0,
such as transparently indicating absence of capabilities if none are
added. This doesn't detract from the correctness of the referenced
commit as vfio in the kernel also uses capability ID zero to mask
capabilties. In fact, we should skip zero capabilities precisely
because the kernel might also expose such a capability at the head
position and re-introduce the problem.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
Reported-by: Jintack Lim <jintack@cs.columbia.edu>
Tested-by: Jintack Lim <jintack@cs.columbia.edu>
Currently we ignore this error, report it with error_reportf_err()
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
qobject_to_qdict(obj) returns NULL when obj isn't a QDict. Check
that instead of qobject_type(obj) == QTYPE_QDICT.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487363905-9480-8-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When performing clock calculations, the ppc405_uc code
has several places where it multiplies together two
32-bit variables and assigns the result to a 64-bit
variable. This doesn't quite do what is intended because
C will compute a 32-bit multiply result. Add casts to
ensure we don't truncate the result.
(Spotted by Coverity, CID 1005504, 1005505.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On POWER, the valid page sizes that the guest can use are bound
to the CPU and not to the memory region. QEMU already has some
fancy logic to find out the right maximum memory size to tell
it to the guest during boot (see getrampagesize() in the file
target/ppc/kvm.c for more information).
However, once we're booted and the guest is using huge pages
already, it is currently still possible to hot-plug memory regions
that does not support huge pages - which of course does not work
on POWER, since the guest thinks that it is possible to use huge
pages everywhere. The KVM_RUN ioctl will then abort with -EFAULT,
QEMU spills out a not very helpful error message together with
a register dump and the user is annoyed that the VM unexpectedly
died.
To avoid this situation, we should check the page size of hot-plugged
DIMMs to see whether it is possible to use it in the current VM.
If it does not fit, we can print out a better error message and
refuse to add it, so that the VM does not die unexpectely and the
user has a second chance to plug a DIMM with a matching memory
backend instead.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1419466
Signed-off-by: Thomas Huth <thuth@redhat.com>
[dwg: Fix a build error on 32-bit builds with KVM]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The spapr-vlan device in QEMU has always presented it's MAC address in
the device tree as an 8 byte value, even though PAPR requires it to be
6 bytes. This is because, at the time, AIX required the value to be 8
bytes. However, modern versions of AIX support the (correct) 6
byte value so they no longer require the workaround.
It would be neatest to always provide a 6 byte value but that would
cause a problem with old Linux kernel ibmveth drivers, so the old 8
byte value is still presented when necessary.
Since commit 13f85203e (3.10, May 2013) the driver has been able to
handle 6 or 8 byte addresses so versions after that don't need to be
considered specially.
Drivers from kernels before that can also handle either type of
address, but not always:
* If the first byte's lowest bits are 10, the address must be 6 bytes.
* Otherwise, the address must be 8 bytes.
(The two bits in question are significant in a MAC address: they
indicate a locally-administered unicast address.)
So to maintain compatibility the old 8 byte value is presented when
the lowest two bits of the first byte are not 10.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Generic helper machine_query_hotpluggable_cpus() replaced
target specific query_hotpluggable_cpus() callbacks so
there is no need in it anymore. However inon NULL callback
value is used to detect/report hotpluggable cpus support,
therefore it can be removed completely.
Replace it with MachineClass.has_hotpluggable_cpus boolean
which is sufficient for the task.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All callbacks FOO_query_hotpluggable_cpus() are practically
the same except of setting vcpus_count to different values.
Convert them to a generic machine_query_hotpluggable_cpus()
callback by moving vcpus_count initialization to per machine
specific callback possible_cpu_arch_ids().
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace SPAPR specific cores[] array with generic
machine->possible_cpus and store core objects there.
It makes cores bookkeeping similar to x86 cpus and
will allow to unify similar code.
It would allow to replace cpu_index based NUMA node
mapping with iproperty based one (for -device created
cores) since possible_cpus carries board defined
topology/layout.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
so it could be reused for SPAPR cores as well
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fill in CpuInstanceProperties once at board init time and
just copy them whenever query_hotpluggable_cpus() is called.
It will keep topology info always available without need
to recalculate it every time it's needed.
Considering it has NUMA node id, it will be used to keep
NUMA node to cpu mapping instead of numa_info[i].node_cpu
bitmasks.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
possible_cpus could be initialized earlier then cpu objects,
i.e. when -smp is parsed so move init code to possible_cpu_arch_ids()
interface func and do initialization on the first call.
it should help later with making -numa cpu/-smp parsing a machine state
properties.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
so that it would be possible to reuse it with
spapr/virt-aarch64 targets.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
hw_error() is for CPU related errors only (it prints out a
register dump and calls abort()), so we should not use it
if we just failed to load the bios image. Apart from that,
realize() functions should not exit directly but always set
the errp with error_setg() in case of errors instead.
Additionally, move some code around and delete the bios memory
subregion again in case of such an error, so that we leave a
clean state when returning to the caller.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The last byte of the option vector was missing due to an off-by-one
error. Without this fix, client architecture support negotiation will
fail because the last byte of option vector 5, which contains the MMU
support, will be missed.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
error_report() already puts a prefix with the program name in front
of the error strings, so the "qemu:" prefix is not necessary here
anymore.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_core_unplug() were essentially spapr_core_unplug_request()
handler that requested CPU removal and registered callback
which did actual cpu core removali but it was called from
spapr_machine_device_unplug() which is intended for actual object
removal. Commit (cf632463 spapr: Memory hot-unplug support)
sort of fixed it introducing spapr_machine_device_unplug_request()
and calling spapr_core_unplug() but it hasn't renamed callback and
by mistake calls it from spapr_machine_device_unplug().
However spapr_machine_device_unplug() isn't ever called for
cpu core since spapr_core_release() doesn't follow expected
hotunplug call flow which is:
1: device_del() ->
hotplug_handler_unplug_request() ->
set destroy_cb()
2: destroy_cb() ->
hotplug_handler_unplug() ->
object_unparent // actual device removal
Fix it by renaming spapr_core_unplug() to spapr_core_unplug_request()
which is called from spapr_machine_device_unplug_request() and
making spapr_core_release() call hotplug_handler_unplug() which
will call spapr_machine_device_unplug() -> spapr_core_unplug()
to remove cpu core.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reveiwed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_core_pre_plug/spapr_core_plug/spapr_core_unplug() are managing
wiring CPU core into spapr machine state and not internal CPU core state.
So move them from spapr_cpu_core.c to spapr.c where other similar
(spapr_memory_[foo]plug()) callbacks are located, which also matches
x86 target practice.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Split off destroying VCPU threads from drc callback
spapr_core_release() into new spapr_cpu_core_unrealizefn()
which takes care of internal cpu core state cleanup (i.e.
VCPU threads) and is called when object_unparent(core)
is called.
That leaves spapr_core_release() only with board mgmt
code, which will be moved to board related file in
follow up patch along with the rest on hotplug callbacks.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Introduce support for emulating the MIPS Boston development board. The
Boston board is built around an FPGA & 3 PCIe controllers, one of which
is connected to an Intel EG20T Platform Controller Hub. It is used
during the development & debug of new CPUs and the software intended to
run on them, and is essentially the successor to the older MIPS Malta
board.
This patch does not implement the EG20T, instead connecting an already
supported ICH-9 AHCI controller. Whilst this isn't accurate it's enough
for typical stock Boston software (eg. Linux kernels) to work with hard
disks given that both the ICH-9 & EG20T implement the AHCI
specification.
Boston boards typically boot kernels in the FIT image format, and this
patch will treat kernels provided to QEMU as such. When loading a kernel
directly, the board code will generate minimal firmware much as the
Malta board code does. This firmware will set up the CM, CPC & GIC
register base addresses then set argument registers & jump to the kernel
entry point. Alternatively, bootloader code may be loaded using the bios
argument in which case no firmware will be generated & execution will
proceed from the start of the boot code at the default MIPS boot
exception vector (offset 0x1fc00000 into (c)kseg1).
Currently real Boston boards are always used with FPGA bitfiles that
include a Global Interrupt Controller (GIC), so the interrupt
configuration is only defined for such cases. Therefore the board will
only allow use of CPUs which implement the CPS components, including the
GIC, and will otherwise exit with a message.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
[yongbok.kim@imgtec.com:
isolated boston machine support for mips64el.
updated for recent Chardev changes.
ignore missing bios/kernel for qtest.
added default -drive to if=ide explicitly]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Add support for emulating the Xilinx AXI Root Port Bridge for PCI
Express as described by Xilinx' PG055 document. This is a PCIe
controller that can be used with certain series of Xilinx FPGAs, and is
used on the MIPS Boston board which will make use of this code.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
[yongbok.kim@imgtec.com:
removed returning on !level,
updated IRQ connection with GPIO logic,
moved xilinx_pcie_init() to boston.c
replaced stw_le_p() with pci_set_word()
and other cosmetic changes]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Introduce support for loading Flattened Image Trees, as used by modern
U-Boot. FIT images are essentially flattened device tree files which
contain binary images such as kernels, FDTs or ramdisks along with one
or more configuration nodes describing boot configurations.
The MIPS Boston board typically boots kernels in the form of FIT images,
and will make use of this code.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
[yongbok.kim@imgtec.com:
fixed potential memory leaks,
isolated building option]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
If the GIC interrupt mask is changed by a write to the smask (set mask)
or rmask (reset mask) registers, we need to re-evaluate the state of the
pins/IRQs fed to the CPU. Without doing so we risk leaving a pin high
despite the interrupt that led to that state being masked, or losing
interrupts if an already pending interrupt is unmasked.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Provide a new function mips_gictimer_get_freq() which returns the
frequency at which a GIC timer will count. This will be useful for
boards which perform setup based upon this frequency.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Support moving the GCR base address & updating the CPU's CP0 CMGCRBase
register appropriately. This is required if a platform needs to move its
GCRs away from other memory, as the MIPS Boston development board does
to avoid its flash memory.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
-----BEGIN PGP SIGNATURE-----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=/97H
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-block-2017-02-21' into staging
Changes to -drive without if= and with if=scsi
# gpg: Signature made Tue 21 Feb 2017 12:22:35 GMT
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-block-2017-02-21:
hw/i386: Deprecate -drive if=scsi with PC machine types
hw: Deprecate -drive if=scsi with non-onboard HBAs
hw/scsi: Concentrate -drive if=scsi auto-create in one place
hw: Drop superfluous special checks for orphaned -drive
blockdev: Make orphaned -drive fatal
blockdev: Improve message for orphaned -drive
hw/arm/highbank: Default -drive to if=ide instead of if=scsi
hw: Default -drive to if=none instead of scsi when scsi cannot work
hw: Default -drive to if=none instead of ide when ide cannot work
hw/arm/cubieboard hw/arm/xlnx-ep108: Fix units_per_default_bus
hw: Default -drive to if=ide explicitly where it works
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The PC machines (pc-q35-* pc-i440fx-* pc-* isapc xenfv) automatically
create lsi53c895a SCSI HBAs and SCSI devices to honor -drive if=scsi.
For giggles, try -drive if=scsi,bus=25,media=cdrom --- this makes QEMU
create 25 of them.
lsi53c895a is thoroughly obsolete (PCI Ultra2 SCSI, ca. 2000), and
currently has no maintainer in QEMU. megasas is a better choice,
except with old OSes that lack drivers. virtio-scsi is a much better
choice when you have a driver, but only (newish) Linux comes with one
in the box. There is no good default that works for all guests.
Encourage users to pick a non-obsolete SCSI HBA that works for them by
deprecating -drive if=scsi.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487161136-9018-4-git-send-email-armbru@redhat.com>
Acked-By: Paolo Bonzini <pbonzini@redhat.com>
Block backends defined with "-drive if=T" with T other than "none" are
meant to be picked up by machine initialization code: a suitable
frontend gets created and wired up automatically.
Drives defined with if=scsi are also picked up by SCSI HBAs added with
-device, unlike other interface types. Deprecate this usage, as follows.
Create the frontends for onboard HBAs in machine initialization code,
exactly like we do for if=ide and other interface types. Change
scsi_legacy_handle_cmdline() to create a frontend only when it's still
missing, and warn that this usage is deprecated.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487161136-9018-3-git-send-email-armbru@redhat.com>
The logic to create frontends for -drive if=scsi is in SCSI HBAs. For
all other interface types, it's in machine initialization code.
A few machine types create the SCSI HBAs necessary for that. That's
also not done for other interface types.
I'm going to deprecate these SCSI eccentricities. In preparation for
that, create the frontends in main() instead of the SCSI HBAs, by
calling new function scsi_legacy_handle_cmdline() there.
Note that not all SCSI HBAs create frontends. Take care not to change
that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487161136-9018-2-git-send-email-armbru@redhat.com>
Acked-By: Paolo Bonzini <pbonzini@redhat.com>
We've traditionally rejected orphans here and there, but not
systematically. For instance, the sun4m machines have an onboard SCSI
HBA (bus=0), and have always rejected bus>0. Other machines with an
onboard SCSI HBA don't.
Commit a66c9dc made all orphans trigger a warning, and the previous
commit turned this into an error. The checks "here and there" are now
redundant. Drop them.
Note that the one in mips_jazz.c was wrong: it rejected bus > MAX_FD,
but MAX_FD is the number of floppy drives per bus.
Error messages change from
$ qemu-system-x86_64 -drive if=ide,bus=2
qemu-system-x86_64: Too many IDE buses defined (3 > 2)
$ qemu-system-mips64 -M magnum,accel=qtest -drive if=floppy,bus=2,id=fd1
qemu: too many floppy drives
$ qemu-system-sparc -M LX -drive if=scsi,bus=1
qemu: too many SCSI bus
to
$ qemu-system-x86_64 -drive if=ide,bus=2
qemu-system-x86_64: -drive if=ide,bus=2: machine type does not support if=ide,bus=2,unit=0
$ qemu-system-mips64 -M magnum,accel=qtest -drive if=floppy,bus=2,id=fd1
qemu-system-mips64: -drive if=floppy,bus=2,id=fd1: machine type does not support if=floppy,bus=2,unit=0
$ qemu-system-sparc -M LX -drive if=scsi,bus=1
qemu-system-sparc: -drive if=scsi,bus=1: machine type does not support if=scsi,bus=1,unit=0
Cc: John Snow <jsnow@redhat.com>
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487153147-11530-9-git-send-email-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
These machines have no onboard SCSI HBA, and no way to plug one.
-drive if=scsi therefore cannot work. They do have an onboard IDE
controller (sysbus-ahci), but fail to honor if=ide.
Change their default to if=ide, and add a TODO comment on what needs
to be done to actually honor -drive if=ide.
Cc: Rob Herring <robh@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1487153147-11530-6-git-send-email-armbru@redhat.com>
Block backends defined with -drive if=scsi are meant to be picked up
by machine initialization code: a suitable frontend gets created and
wired up automatically.
if=scsi drives not picked up that way can still be used with -device
as if they had if=none, but that's unclean and best avoided. Unused
ones produce an "Orphaned drive without device" warning.
A few machine types default to if=scsi, even though they don't
actually have a SCSI HBA. This makes no sense. Change their default
to if=none. Affected machines:
* aarch64/arm: realview-pbx-a9 vexpress-a9 vexpress-a15 xilinx-zynq-a9
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <1487153147-11530-5-git-send-email-armbru@redhat.com>
Machine types cubieboard, xlnx-ep108, xlnx-zcu102 have an onboard AHCI
controller, but neglect to set their MachineClass member
units_per_default_bus = 1. This permits -drive if=ide,unit=1, which
makes no sense for AHCI. It also screws up index=N for odd N, because
it gets desugared to unit=1,bus=N/2
Doesn't really matter, because these machine types fail to honor
-drive if=ide. Add the missing units_per_default_bus = 1 anyway,
along with a TODO comment on what needs to be done for -drive if=ide.
Also set block_default_type = IF_IDE explicitly. It's currently the
default, but the next commit will change it to something more
sensible, and we want to keep the IF_IDE default for these three
machines. See also the previous commit.
Cc: Beniamino Galvani <b.galvani@gmail.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <1487153147-11530-3-git-send-email-armbru@redhat.com>
Block backends defined with -drive if=ide are meant to be picked up by
machine initialization code: a suitable frontend gets created and
wired up automatically.
if=ide drives not picked up that way can still be used with -device as
if they had if=none, but that's unclean and best avoided. Unused ones
produce an "Orphaned drive without device" warning.
-drive parameter "if" is optional, and the default depends on the
machine type. If a machine type doesn't specify a default, the
default is "ide".
Many machine types default to if=ide, even though they don't actually
have an IDE controller. A future patch will change these defaults to
something more sensible. To prepare for it, this patch makes default
"ide" explicit for the machines that actually pick up if=ide drives:
* alpha: clipper
* arm/aarch64: spitz borzoi terrier tosa
* i386/x86_64: generic-pc-machine (with concrete subtypes pc-q35-*
pc-i440fx-* pc-* isapc xenfv)
* mips64el: fulong2e
* mips/mipsel/mips64el: malta mips
* ppc/ppc64: mac99 g3beige prep
* sh4/sh4eb: r2d
* sparc64: sun4u sun4v
Note that ppc64 machine powernv already sets an "ide" default
explicitly. Its IDE controller isn't implemented, yet.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1487153147-11530-2-git-send-email-armbru@redhat.com>
v2:
* Rebased to resolve scsi conflicts
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYrCroAAoJEJykq7OBq3PIpJAH/1nvSNr8IRrEWFXuHxHlwqXo
opt8PZm1BhKLwKoZ7qwttWk8oxWV+VBRZcnLnm1+chmIqzwbeUVo8nzFwPbv1kB3
2x3uLz+3Qn0uln9v43alK5mHZk7wpGCshFBn3jkxdltzZX9vIaG+8IkKsgkS+IiC
MkUPFfoY/wRQq+eyBvhe6xPHoIlKa++LeQdRQ4kayvaixW1dn4Hbvj/vLAAG1nKL
HcEtO3EddEgkIvX5yztOWNKvEPqcYes7Ki207CjH8GXj4Ygmn4dBebDq+GR0NYwm
EXERuJJiPEbSLFknffwioVfllWKCVwg7oFaIuz6ysxVGFwFZSdn83CTjK+FbtFU=
=k9gD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
v2:
* Rebased to resolve scsi conflicts
# gpg: Signature made Tue 21 Feb 2017 11:56:24 GMT
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request: (24 commits)
coroutine-lock: make CoRwlock thread-safe and fair
coroutine-lock: add mutex argument to CoQueue APIs
coroutine-lock: place CoMutex before CoQueue in header
test-aio-multithread: add performance comparison with thread-based mutexes
coroutine-lock: add limited spinning to CoMutex
coroutine-lock: make CoMutex thread-safe
block: document fields protected by AioContext lock
async: remove unnecessary inc/dec pairs
aio-posix: partially inline aio_dispatch into aio_poll
block: explicitly acquire aiocontext in aio callbacks that need it
block: explicitly acquire aiocontext in bottom halves that need it
block: explicitly acquire aiocontext in callbacks that need it
block: explicitly acquire aiocontext in timers that need it
aio: push aio_context_acquire/release down to dispatching
qed: introduce qed_aio_start_io and qed_aio_next_io_cb
blkdebug: reschedule coroutine on the AioContext it is running on
coroutine-lock: reschedule coroutine on the AioContext it was running on
nbd: convert to use qio_channel_yield
io: make qio_channel_yield aware of AioContexts
io: add methods to set I/O handlers on AioContext
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All that CoQueue needs in order to become thread-safe is help
from an external mutex. Add this to the API.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170213181244.16297-6-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-16-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-15-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This covers both file descriptor callbacks and polling callbacks,
since they execute related code.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-14-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Check message size too when figuring whenever we should expect more data.
Fix debug message to show useful data, p->iov.size is fixed anyway if we
land there, print how much we got meanwhile instead.
Also check announced message size against actual message size. That
is a more general fix for CVE-2017-5898 than commit "c7dfbf3 usb: ccid:
check ccid apdu length".
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1487250819-23764-4-git-send-email-kraxel@redhat.com
Move up header size check, so we can use header fields in sanity checks
(in followup patches). Also reword the debug message.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1487250819-23764-3-git-send-email-kraxel@redhat.com
Add err goto label where we can jump to from all error conditions.
STALL request on all errors. Reset position on all errors.
Normal request processing is not in a else branch any more, so this code
is reintended, there are no code changes in that part of the code
though.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1487250819-23764-2-git-send-email-kraxel@redhat.com
Turn existing TYPE_XHCI into an abstract base class.
Create two child classes, TYPE_NEC_XHCI (same name as old xhci
controller) and TYPE_QEMU_XHCI (using an ID from our namespace).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Message-id: 1486382139-30630-3-git-send-email-kraxel@redhat.com
The nec/renesas driver problems have finally been debugged and root
caused, see commit "7da76e1 xhci: fix event queue IRQ handling".
It's pretty clear now that
(a) The whole "driver can't handle ring full" story is most likely
wrong.
(b) The ER_FULL_HACK workaround based on the false assumtion doesn't
much. It avoids the driver crashing (without commit 7da76e1), but
it doesn't make usb work.
(c) With 7da76e1 applied it doesn't trigger any more.
So, lets kill it. Or, to be exact, lets almost kill it. Some data
fields are kept unused in the state struct, for live migration backward
compatibility.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1486382139-30630-2-git-send-email-kraxel@redhat.com
Limits should be big enough that normal guest should not hit it.
Add a tracepoint to log them, just in case. Also, while being
at it, log the existing link trb limit too.
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1486383669-6421-1-git-send-email-kraxel@redhat.com
The guest may builds an infinite loop with link eds. This patch
limit the number of linked ed to avoid this.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Message-id: 5899a02e.45ca240a.6c373.93c1@mx.google.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It should return 1 if an error occurs when reading iso td.
This will avoid an infinite loop issue in ohci_service_ed_list.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Message-id: 5899ac3e.1033240a.944d5.9a2d@mx.google.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In usb_ehci_init function, it initializes 's->ipacket', but there
is no corresponding function to free this. As the ehci can be hotplug
and unplug, this will leak host memory leak. In order to make the
hierarchy clean, we should add a ehci pci finalize function, then call
the clean function in ehci device.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Message-id: 589a85b8.3c2b9d0a.b8e6.1434@mx.google.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use type_init() and friends to adapt the ColdFire interrupt
controller to the latest QEMU device conventions.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Since it is now possible to instantiate a CPU and RAM with the "none"
machine, too, and a kernel can be loaded there with the generic loader
device, there is no more need for the m68k "dummy" machine. Thus let's
remove this unmaintained file now.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This helps in debugging incorrect level passed in.
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Another patch to convert the DPRINTF() stuffs. This patch focuses on the
address translation path and caching.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VT-d codes are still using static DEBUG_INTEL_IOMMU macro. That's not
good, and we should end the day when we need to recompile the code
before getting useful debugging information for vt-d. Time to switch to
the trace system. This is the first patch to do it.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are lots of places in current intel_iommu.c codes that named
"iova" as "gpa". It is really confusing to use a name "gpa" in these
places (which is very easily to be understood as "Guest Physical
Address", while it's not). To make the codes (much) easier to be read, I
decided to do this once and for all.
No functional change is made. Only literal ones.
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we have a standalone memory region for MSI, all the irq region
requests should be redirected there. Cleaning up the block with an
assertion instead.
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This capability asks the guest to invalidate cache before each map operation.
We can use this invalidation to trap map operations in the hypervisor.
Signed-off-by: Aviv Ben-David <bd.aviv@gmail.com>
[peterx: using "caching-mode" instead of "cache-mode" to align with spec]
[peterx: re-write the subject to make it short and clear]
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Aviv Ben-David <bd.aviv@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Linux vfio driver supports to do VFIO_IOMMU_UNMAP_DMA for a very big
region. This can be leveraged by QEMU IOMMU implementation to cleanup
existing page mappings for an entire iova address space (by notifying
with an IOTLB with extremely huge addr_mask). However current
vfio_iommu_map_notify() does not allow that. It make sure that all the
translated address in IOTLB is falling into RAM range.
The check makes sense, but it should only be a sensible checker for
mapping operations, and mean little for unmap operations.
This patch moves this check into map logic only, so that we'll get
faster unmap handling (no need to translate again), and also we can then
better support unmapping a very big region when it covers non-ram ranges
or even not-existing ranges.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A cleanup for vfio_iommu_map_notify(). Now we will fetch vaddr even if
the operation is unmap, but it won't hurt much.
One thing to mention is that we need the RCU read lock to protect the
whole translation and map/unmap procedure.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We traces its range, but we don't know whether it's a MAP/UNMAP. Let's
dump it as well.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When we add PCIe extended capabilities, we should be following the rule
that we add the head extended cap (at offset 0x100) first, then the rest
of them. Meanwhile, we are always adding new capability bits at the end
of the list. Here the "next" looks meaningless in all cases since it
should always be zero (along with the "header").
Simplify the function a bit, and it looks more readable now.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For ARM virt machine, if we use virt-2.7 which will not create ITS node,
the virtio-net can not recieve interrupts so it can't get ip address
through dhcp.
This fixes commit 83d768b(virtio: set ISR on dataplane notifications).
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio-net change is necessary because it uses virtqueue_fill
and virtqueue_flush instead of the more convenient virtqueue_push.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the vring has not been set up, it is not necessary for vring_used_idx
to do anything (as is already the case when the caller is virtio_load).
This is harmless for now, but it will be a problem when the
MemoryRegionCache has not been set up.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The cached translations are RCU-protected to allow efficient use
when processing virtqueues.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For now, the cache is created on every virtqueue_pop. Later on,
direct descriptors will be able to reuse it.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This makes little difference, but it makes the code change smaller
for the next patch that introduces MemoryRegionCache. This is
because map/unmap are similar to MemoryRegionCache init/destroy.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In virtio_queue_host_notifier_aio_poll, not all "!virtio_queue_empty()"
cases are making true progress.
Currently the offending one is virtio-scsi event queue, whose handler
does nothing if no event is pending. As a result aio_poll() will spin on
the "non-empty" VQ and take 100% host CPU.
Fix this by reporting actual progress from virtio queue aio handlers.
Reported-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Ed Swierk <eswierk@skyportsystems.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VFIO actually wants to create a capability with ID == 0.
This is done to make guest drivers skip the given capability.
pcie_add_capability then trips up on this capability
when looking for end of capability list.
To support this use-case, it's easy enough to switch to
e.g. 0xffffffff for these comparisons - we can be sure
it will never match a 16-bit capability ID.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
it's not very convenient to use the crash-information property interface,
so provide a CPU class callback to get the guest crash information, and pass
that information in the event
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-Id: <1487053524-18674-3-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use type_init() etc. to adapt the ColdFire UART
to the latest QEMU device conventions.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <1485586582-6490-1-git-send-email-huth@tuxfamily.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds call to apic_reset_irq_delivered when the virtual
machine is reset.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20170131114054.276.62201.stgit@PASHA-ISP>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1486106298-3699-4-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It should be 0x20, rather than 0x11.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1486106298-3699-3-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we do "info ioapic" for kvm ioapic, we were building up a temporary
ioapic object. Let's fetch the real one and update correspond to the
real object as well.
This fixes printing uninitialized version field in
ioapic_print_redtbl().
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1486106298-3699-2-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This issue is like the issue in e1000 network card addressed in
this commit:
e1000: eliminate infinite loops on out-of-bounds transfer start.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
i.MX Fast Ethernet Controller uses buffer descriptors to manage
data flow to/fro receive & transmit queues. While transmitting
packets, it could continue to read buffer descriptors if a buffer
descriptor has length of zero and has crafted values in bd.flags.
Set an upper limit to number of buffer descriptors.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Because is_first is declared inside a loop, it is always true. The store
is dead, and so is the "else" branch of "if (is_first)". is_last is
okay though.
Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20170203160651.19917-5-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Merge fix against Halil's removal of the '_start' field in
VMSTATE_VBUFFER_MULTIPLY
The member VMStateField.start is used for two things, partial data
migration for VBUFFER data (basically provide migration for a
sub-buffer) and for locating next in QTAILQ.
The implementation of the VBUFFER feature is broken when VMSTATE_ALLOC
is used. This however goes unnoticed because actually partial migration
for VBUFFER is not used at all.
Let's consolidate the usage of VMStateField.start by removing support
for partial migration for VBUFFER.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170203175217.45562-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Both devices seem to be specific to the ARM platform. It's confusing
for the users if they show up on other target architectures, too
(e.g. when the user runs QEMU with "-device ?" to get a list of
supported devices). Thus let's introduce proper configuration switches
so that the devices are only compiled and included when they are
really required.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The device has "bridge" in its name, so it should obviously be in
the category DEVICE_CATEGORY_BRIDGE.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Previous IGD, up through Broadwell, only seem to write GTT values into
the first 1MB of space allocated for the BDSM, but clearly the GTT
can be multiple MB in size. Our test in vfio_igd_quirk_data_write()
correctly filters out indexes beyond 1MB, but given the 1MB mask we're
using, we re-apply writes only to the first 1MB of the guest allocated
BDSM.
We can't assume either the host or guest BDSM is naturally aligned, so
we can't simply apply a different mask. Instead, save the host BDSM
and do the arithmetic to subtract the host value to get the BDSM
offset and add it to the guest allocated BDSM.
Reported-by: Alexander Indenbaum <alexander.indenbaum@gmail.com>
Tested-by: Alexander Indenbaum <alexander.indenbaum@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The size of a segment is not necessarily a power of 2.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1486648058-520-5-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
HW works fine in normal read mode with dummy bytes being set. So let's
check this case to not transfer bytes.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1486648058-520-4-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The flash devices used for the FMC controller (BMC firmware) are well
defined for each Aspeed machine and are all smaller than the default
mapping window size, at least for CE0 which is the chip the SoC boots
from.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1486648058-520-3-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
write_boot_rom() does not check for negative values. This is more a
problem for coverity than the actual code as the size of the flash
device is checked when the m25p80 object is created. If there is
anything wrong with the backing file, we should not even reach that
path.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1486648058-520-2-git-send-email-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fw-cfg recently learned how to directly access guest memory and does so in
cache coherent fashion. Tell the guest about that fact when it's using DT.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1486644810-33181-5-git-send-email-agraf@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fw-cfg recently learned how to directly access guest memory and does so in
cache coherent fashion. Tell the guest about that fact when it's using ACPI.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1486644810-33181-4-git-send-email-agraf@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Virtio-mmio devices can directly access guest memory and do so in cache
coherent fashion. Tell the guest about that fact when it's using ACPI.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1486644810-33181-3-git-send-email-agraf@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU emulated hardware is always dma coherent with its guest. We do
annotate that correctly on the PCI host controller, but left out
virtio-mmio.
Recent kernels have started to interpret that flag rather than take
dma coherency as granted with virtio-mmio. While that is considered
a kernel bug, as it breaks previously working systems, it showed that
our dt description is incomplete.
This patch adds the respective marker that allows guest OSs to evaluate
that our virtio-mmio devices are indeed cache coherent.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1486644810-33181-2-git-send-email-agraf@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch contains several fixes to enable vPMU under TCG mode. It
first removes the checking of kvm_enabled() while unsetting
ARM_FEATURE_PMU. With it, the .pmu option can be used to turn on/off vPMU
under TCG mode. Secondly the PMU node of DT table is now created under TCG.
The last fix is to disable the masking of PMUver field of ID_AA64DFR0_EL1.
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1486504171-26807-5-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The AHCI emulation code supports 64-bit addressing and should advertise this
fact in the Host Capabilities register. Both Linux and Windows drivers test
this bit to decide if the upper 32 bits of various registers may be written
to, and at least some versions of Windows have a bug where DMA is attempted
with an address above 4GB but, in the absence of HOST_CAP_64, the upper 32
bits are left unititialized which leads to a memory corruption.
[Maintainer edit:
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1411105,
which affects Windows Server 2008 SP2 in some cases.]
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 1484305370-6220-1-git-send-email-lprosek@redhat.com
[Amended commit message --js]
Signed-off-by: John Snow <jsnow@redhat.com>
This reverts commit 5858dd1801.
Conflicts:
hw/display/cirrus_vga.c
Cc: Wolfgang Bumiller <w.bumiller@proxmox.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 1486645341-5010-2-git-send-email-kraxel@redhat.com
The blit_region_is_unsafe checks don't work correctly for the
patterncopy source. It's a fixed-sized region, which doesn't
depend on cirrus_blt_{width,height}. So go do the check in
cirrus_bitblt_common_patterncopy instead, then tell blit_is_unsafe that
it doesn't need to verify the source. Also handle the case where we
blit from cirrus_bitbuf correctly.
This patch replaces 5858dd1801.
Security impact: I think for the most part error on the safe side this
time, refusing blits which should have been allowed.
Only exception is placing the blit source at the end of the video ram,
so cirrus_blt_srcaddr + 256 goes beyond the end of video memory. But
even in that case I'm not fully sure this actually allows read access to
host memory. To trick the commit 5858dd18 security checks one has to
pick very small cirrus_blt_{width,height} values, which in turn implies
only a fraction of the blit source will actually be used.
Cc: Wolfgang Bumiller <w.bumiller@proxmox.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 1486645341-5010-1-git-send-email-kraxel@redhat.com
When the guest sends VIRTIO_GPU_CMD_RESOURCE_UNREF without detaching the
backing storage beforehand (VIRTIO_GPU_CMD_RESOURCE_DETACH_BACKING)
we'll leak memory.
This patch fixes it for 3d mode, simliar to the 2d mode fix in commit
"b8e2392 virtio-gpu: call cleanup mapping function in resource destroy".
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1485167210-4757-1-git-send-email-kraxel@redhat.com
In virtio_gpu_set_scanout function, when creating the 'rect'
its refcount is set to 2, by pixman_image_create_bits and
qemu_create_displaysurface_pixman function. This can lead
a memory leak issues. This patch avoid this issue.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 5884626f.5b2f6b0a.1bfff.3037@mx.google.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use the 'unimplemented' dummy device to cover regions of the
SoC device memory map which we don't have proper device
implementations for yet.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1484247815-15279-4-git-send-email-peter.maydell@linaro.org
Create a new "unimplemented" sysbus device, which simply accepts
all read and write accesses, and implements them as read-as-zero,
write-ignored, with logging of the access as LOG_UNIMP.
This is useful for stubbing out bits of an SoC or board model
which haven't been written yet.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1484247815-15279-3-git-send-email-peter.maydell@linaro.org
Since the integratorcp board creates the CPU object directly
rather than via cpu_arm_init(), we have to call the CPU
class parse_features() method ourselves if we want to
support the user passing features via the -cpu command
line argument as well as just the cpu name. Do so.
Signed-off-by: Julian Brown <julian@codesourcery.com>
[PMM: split out into its own patch]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While doing multi block SDMA transfer in routine
'sdhci_sdma_transfer_multi_blocks', the 's->fifo_buffer' starting
index 'begin' and data length 's->data_count' could end up to be same.
This could lead to an OOB access issue. Correct transfer data length
to avoid it.
Cc: qemu-stable@nongnu.org
Reported-by: Jiang Xin <jiangxin1@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20170130064736.9236-1-ppandit@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This enables reboot of a guest from U-Boot and Linux.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 1485452251-1593-3-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Aspeed SoC includes a set of watchdog timers using 32-bit
decrement counters, which can be based either on the APB clock or
a 1 MHz clock.
The watchdog timer is designed to prevent system deadlock and, in
general, it should be restarted before timeout. When a timeout occurs,
different types of signals can be generated, ARM reset, SOC reset,
System reset, CPU Interrupt, external signal or boot from alternate
block. The current model only performs the system reset function as
this is used by U-Boot and Linux.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-id: 1485452251-1593-2-git-send-email-clg@kaod.org
[clg: - fixed compile breakage
- fixed io region size
- added watchdog_perform_action() on timer expiry
- wrote a commit log
- merged fixes from Andrew Jeffery to scale the reload value ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
VMState added by this patch preserves correct
loading of the integratorcp device state.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-id: 20170131114310.6768.79416.stgit@PASHA-ISP
[PMM: removed unnecessary minimum_version_id_old lines]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check qdev's call to vmstate_register_with_alias_id; that gets
most of the common uses; there's hundreds of calls via vmstate_register
which could get fixed over time.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170202125956.21942-4-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
I'll be adding an error to it in a subsequent patch.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170202125956.21942-2-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The qemu xhci emulation doesn't handle the ERDP_EHB flag correctly.
When the host adapter queues a new event the ERDP_EHB flag is set. The
flag is cleared (via w1c) by the guest when it updates the ERDP (event
ring dequeue pointer) register to notify the host adapter which events
it has fetched.
An IRQ must be raised in case the ERDP_EHB flag flips from clear to set.
If the flag is set already (which implies there are events queued up
which are not yet processed by the guest) xhci must *not* raise a IRQ.
Qemu got that wrong and raised an IRQ on every event, thereby generating
spurious interrupts in case we've queued events faster than the guest
processed them. This patch fixes that.
With that change in place we also have to check ERDP updates, to see
whenever the guest has fetched all queued events. In case there are
still pending events set ERDP_EHB and raise an IRQ again, to make sure
the events don't linger unseen forever.
The linux kernel driver and the microsoft windows driver (shipped with
win8+) can deal with the spurious interrupts without problems. The
renesas windows driver (v2.1.39) which can be used on older windows
versions is quite upset though. It does spurious ERDP updates now and
then (not every time, seems we must hit a race window for this to
happen), which in turn makes the qemu xhci emulation think the event
ring is full. Things go south from here ...
tl;dr: This is the "fix xhci on win7" patch.
Cc: M.Cerveny@computer.org
Cc: 1373228@bugs.launchpad.net
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1486104705-13761-1-git-send-email-kraxel@redhat.com
CCID device emulator uses Application Protocol Data Units(APDU)
to exchange command and responses to and from the host.
The length in these units couldn't be greater than 65536. Add
check to ensure the same. It'd also avoid potential integer
overflow in emulated_apdu_from_guest.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 20170202192228.10847-1-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
xhci_submit and xhci_fire_ctl_transfer are is called from
xhci_kick_epctx processing loop only, so there is no need to call
xhci_kick_epctx make sure processing continues. Also eecursive calls
into xhci_kick_epctx can cause trouble.
Drop the xhci_kick_epctx calls.
Cc: 1653384@bugs.launchpad.net
Fixes: 94b037f2a4
Reported-by: Fabian Lesniak <fabian@lesniak-it.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1485790607-31399-4-git-send-email-kraxel@redhat.com
Make clear that this isn't guaranteed to actually complete the transfer,
the usb packet can still be in flight after calling that function.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1485790607-31399-3-git-send-email-kraxel@redhat.com
Windows 10 reportedly sends these, so accept them in case
the device in question is a superspeed (usb3) device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1485870727-21956-2-git-send-email-kraxel@redhat.com
Print some more details in case we get a unknown
control request, to ease trouble-shooting.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1485870727-21956-1-git-send-email-kraxel@redhat.com
1. Set bInterfaceProtocol to 0x00 for usb-tablet. This should be
non-zero for boot protocol devices only, which the usb-tablet is not.
2. Set the usb-tablet's usage to "mouse" in the report descriptor.
The boot protocol of 0x02 specifically confused OS X/macOS' HID driver
stack, causing it to generate additional bogus HID events with relative
motion in addition to the tablet's absolute coordinate events.
Absolute pointing devices with HID Report Descriptor usage of 0x01
(pointing) are treated by the macOS HID driver as analog sticks, and
absolute coordinates are not directly translated to absolute mouse
cursor positions. Changing it to 0x02 (mouse) fixes the problem, and
does not have any adverse effect in other operating systems and
windowing systems. (VMWare does the same thing.)
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-id: 1485365075-32702-1-git-send-email-phil@philjordan.eu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The m48t59 device supports both ISA and direct sysbus attached versions of
the device in the one .c file. This can be awkward for some embedded
machine types which need the sysbus M48T59, but don't want to pull in the
ISA bus code and its other dependencies.
Therefore, this patch splits out the code for the ISA attached M48T59 into
its own C file. It will be built when both CONFIG_M48T59 and
CONFIG_ISA_BUS are enabled.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Currently, the code to handle the legacy ISA bus is always included in
qemu. However there are lots of platforms that don't include ISA legacy
devies, and quite a few that have never used ISA legacy devices at all.
This patch allows the ISA bus code to be disabled in the configuration for
platforms where it doesn't make sense.
For now, the default configs are adjusted to include ISA on all platforms
including PCI: anything with PCI can at least in principle add an i82378
PCI->ISA bridge. Also, CONFIG_IDE_CORE which is already in pci.mak
requires ISA support.
We also explicitly enable ISA on some other non-PCI platforms which include
ISA devices: moxie, sparc and unicore32. We may want to pare this down in
future.
The platforms that will lose ISA by default are: cris, lm32, microblazeel,
microblaze, openrisc, s390x, tricore, xtensaeb, xtensa. As far as I can
tell none of these ever used ISA.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
At present, the core device model code for 8250-like serial ports
(serial.c) and the code for serial ports attached to ISA-style legacy IO
(serial-isa.c) are both controlled by the CONFIG_SERIAL variable.
There are lots and lots of embedded platforms that have 8250-like serial
ports but have never had anything resembling ISA legacy IO. Therefore,
split serial-isa into its own CONFIG_SERIAL_ISA option so it can be
disabled for platforms where it's not appropriate.
For now, I enabled CONFIG_SERIAL_ISA in every default-config where
CONFIG_SERIAL is enabled, excepting microblaze, or32, and xtensa. As best
as I can tell, those platforms never used legacy ISA, and also don't
include PCI support (which would allow connection of a PCI->ISA bridge
and/or a southbridge including legacy ISA serial ports).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
This obsoletes ppc-for-2.9-20170112, which had a MacOS build bug.
This is a long overdue ppc pull request for qemu-2.9. It's been a
long time coming due to some holidays and inconveniently timed
problems with testing. So, there's a lot in here:
* More POWER9 instruction implementations for TCG
* The simpler parts of my CPU compatibility mode cleanup
* This changes behaviour to prefer compatibility modes over
"raW" mode for new machine type versions
* New "40p" machine type which is essentially a modernized and
cleaned up "prep". The intention is that it will replace "prep"
once it has some more testing and polish.
* Add pseries-2.9 machine type
* Implement H_SIGNAL_SYS_RESET hypercall
* Consolidate the two alternate CPU init paths in pseries by
making it always go through CPU core objects to initialize CPU
* A number of bugfixes and cleanups
* Stop the guest timebase when the guest is stopped under KVM.
This makes the guest system clock also stop when paused, which
matches the x86 behaviour.
* Some preliminary cleanups leading towards implementation of the
POWER9 MMU.
There are also some changes not strictly related to ppc code, but for
its benefit:
* Limit the pxi-expander-bridge (PXB) device to x86 guests only
(it's essentially a hack to work around historical x86
limitations)
* Some additions to the 128-bit math in host_utils, necessary for
some of the new instructions.
* Revise a number of qtests and enable them for ppc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=vLVl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170202' into staging
ppc patch queue 2017-02-02
This obsoletes ppc-for-2.9-20170112, which had a MacOS build bug.
This is a long overdue ppc pull request for qemu-2.9. It's been a
long time coming due to some holidays and inconveniently timed
problems with testing. So, there's a lot in here:
* More POWER9 instruction implementations for TCG
* The simpler parts of my CPU compatibility mode cleanup
* This changes behaviour to prefer compatibility modes over
"raW" mode for new machine type versions
* New "40p" machine type which is essentially a modernized and
cleaned up "prep". The intention is that it will replace "prep"
once it has some more testing and polish.
* Add pseries-2.9 machine type
* Implement H_SIGNAL_SYS_RESET hypercall
* Consolidate the two alternate CPU init paths in pseries by
making it always go through CPU core objects to initialize CPU
* A number of bugfixes and cleanups
* Stop the guest timebase when the guest is stopped under KVM.
This makes the guest system clock also stop when paused, which
matches the x86 behaviour.
* Some preliminary cleanups leading towards implementation of the
POWER9 MMU.
There are also some changes not strictly related to ppc code, but for
its benefit:
* Limit the pxi-expander-bridge (PXB) device to x86 guests only
(it's essentially a hack to work around historical x86
limitations)
* Some additions to the 128-bit math in host_utils, necessary for
some of the new instructions.
* Revise a number of qtests and enable them for ppc
# gpg: Signature made Thu 02 Feb 2017 01:40:16 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.9-20170202: (107 commits)
hw/ppc/pnv: Use error_report instead of hw_error if a ROM file can't be found
ppc/kvm: Handle the "family" CPU via alias instead of registering new types
target/ppc/mmu_hash64: Fix incorrect shift value in amr calculation
target/ppc/mmu_hash64: Fix printing unsigned as signed int
tcg/POWER9: NOOP the cp_abort instruction
target/ppc/debug: Print LPCR register value if register exists
target-ppc: Add xststdc[sp, dp, qp] instructions
target-ppc: Add xvtstdc[sp,dp] instructions
target-ppc: Add MMU model check for booke machines
ppc: switch to constants within BUILD_BUG_ON
target/ppc/cpu-models: Fix/remove bad CPU aliases
target/ppc: Remove unused POWERPC_FAMILY(POWER)
spapr: clock should count only if vm is running
ppc: Remove unused function cpu_ppc601_rtc_init()
target/ppc: Add pcr_supported to POWER9 cpu class definition
powerpc/cpu-models: rename ISAv3.00 logical PVR definition
target-ppc: Add xvcv[hpsp, sphp] instructions
target-ppc: Add xsmulqp instruction
target-ppc: Add xsdivqp instruction
target-ppc: Add xscvsdqp and xscvudqp instructions
...
# Conflicts:
# hw/pci-bridge/Makefile.objs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The error exits of xen_pv_find_xendev() free the new xen-device via
g_free() which is wrong.
As the xen-device has been initialized as qdev it must be removed
via qdev_unplug().
This bug has been introduced with commit 3a6c9172ac
("xen: create qdev for each backend device").
Reported-by: Roger Pau Monné <roger.pau@citrix.com>
Tested-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
- build error with old gcc versions
- race between cmma reset and rom/loader resets
- linux-user vs. cpu model
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=hOry
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20170201' into staging
s390x fixes
- build error with old gcc versions
- race between cmma reset and rom/loader resets
- linux-user vs. cpu model
# gpg: Signature made Wed 01 Feb 2017 08:24:47 GMT
# gpg: using RSA key 0x117BBC80B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
# Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C
* remotes/borntraeger/tags/s390x-20170201:
target/s390x: use "qemu" cpu model in user mode
s390x/kvm: fix small race reboot vs. cmma
s390-pci: fix compilation on older GCC versions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When doing bitblt copy in backward mode, we should minus the
blt width first just like the adding in the forward mode. This
can avoid the oob access of the front of vga's vram.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
{ kraxel: with backward blits (negative pitch) addr is the topmost
address, so check it as-is against vram size ]
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Wolfgang Bumiller <w.bumiller@proxmox.com>
Fixes: d3532a0db0 (CVE-2014-8106)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1485938101-26602-1-git-send-email-kraxel@redhat.com
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
generic pci root port support
disable shpc by default
safer version of ARRAY_SIZE and QEMU_BUILD_BUG_ON
fixes and cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYkTwaAAoJECgfDbjSjVRpHHoIALlEhk7iZJvjJBiT0BQ51lGB
uU0fq+8H2G+WZoM83dpSv/pG1Ob6SZtiehsXWf+6Za+AgnU3STCZDXGKo9Jxs2EO
jp73puewWCq69VMyjGnGEWWh4bf41xjWYVrhVrY9LSz7u6hCM9sdWPRy/PGLSlLo
s3xgYefGdtol0S5qMdb4LOb2tfcdGYHADyMiERT994pmfZKrBMXlHlVM0jOo5ytw
zknRh4JwH+zZMQPczrvWUTjdxRE0UIUd4fFz9cRwX8F6zVpAbKAT2Ird2jGNlpyh
jQBX+sxXQR3u+mjZDxZBYbpxOZARUTriagAJPs343uIUCPOmvVXsluidF9bkU+A=
=ZBEs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost, pci: fixes, features
generic pci root port support
disable shpc by default
safer version of ARRAY_SIZE and QEMU_BUILD_BUG_ON
fixes and cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 01 Feb 2017 01:38:34 GMT
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (22 commits)
arm: add trailing ; after MISMATCH_CHECK
arm: better stub version for MISMATCH_CHECK
hw/pci: disable pci-bridge's shpc by default
vhost-user: delete chardev on cleanup
vhost: skip ROM sections
virtio: make virtio_should_notify static
pci: Convert msix_init() to Error and fix callers
hcd-xhci: check & correct param before using it
msix: Follow CODING_STYLE
hw/i386: check if nvdimm is enabled before plugging
hw/pcie: Introduce Generic PCI Express Root Port
hw/ioh3420: derive from PCI Express Root Port base class
hw/pcie: Introduce a base class for PCI Express Root Ports
intel_iommu: fix and simplify size calculation in process_device_iotlb_desc()
pci: mark ROMs read-only
ARRAY_SIZE: check that argument is an array
compiler: expression version of QEMU_BUILD_BUG_ON
compiler: rework BUG_ON using a struct
QEMU_BUILD_BUG_ON: use __COUNTER__
ppc: switch to constants within BUILD_BUG_ON
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw_error() is for CPU related errors only (it dumps the CPU registers
and calls abort()!), so using error_report() is the better choice
of reporting an error in case we simply did not find a file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Machines bamboo, e500 and virtex-ml507 assume a certain MMU model,
otherwise resulting in unpredictable behavior. Add apropriate checks
into *_init functions.
Signed-off-by: Valentin Plotkin <caliborn@sdf.org>
[regarding virtex parts]
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Apply the cirrus_addr_mask to cirrus_blt_dstaddr and cirrus_blt_srcaddr
right after assigning them, in cirrus_bitblt_start(), instead of having
this all over the place in the cirrus code, and missing a few places.
Reported-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1485338996-17095-1-git-send-email-kraxel@redhat.com
The rops used by cirrus_bitblt_common_patterncopy only use
the destination pitch, so the source pitch shoul allowed to
be zero and the blit with used for the range check around the
source address.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Message-id: 1485272138-23249-1-git-send-email-w.bumiller@proxmox.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
cirrus_invalidate_region() calls memory_region_set_dirty()
on a per-line basis, always ranging from off_begin to
off_begin+bytesperline. With a negative pitch off_begin
marks the top most used address and thus we need to do an
initial shift backwards by a line for negative pitches of
backward blits, otherwise the first iteration covers the
line going from the start offset forwards instead of
backwards.
Additionally since the start address is inclusive, if we
shift by a full `bytesperline` we move to the first address
*not* included in the blit, so we only shift by one less
than bytesperline.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Message-id: 1485352137-29367-1-git-send-email-w.bumiller@proxmox.com
[ kraxel: codestyle fixes ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Right now we reset all devices before we reset the cmma states. This
can result in the host kernel discarding guest pages that were
previously in the unused state but already contain a bios or a -kernel
file before the cmma reset has finished. This race results in random
guest crashes or hangs during very early reboot.
Fixes: 1cd4e0f6f0 ("s390x/cmma: clean up cmma reset")
Cc: qemu-stable@nongnu.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
S390PCIBusDevice is typedef'ed earlier in the file, before the hunks
that this patch modifies. The double typedef causes old versions of
GCC to complain.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1485523252-88288-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The shpc component is optional while ACPI hotplug is used
for hot-plugging PCI devices into a PCI-PCI bridge.
Disabling the shpc by default will make slot 0 usable at boot time
and not only for hot-plug, without loosing any functionality.
Older machines will have shpc enabled for compatibility reasons.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost does not support RO protections on memory at the moment - adding
ROMs would mean that e.g. a buggy guest might change them in-memory - a
condition from which guest reset does not recover. Not nice.
We also definitely don't want to try logging writes into ROMs -
in particular guests set very high addresses for ROM BARs
so logging these writes would waste a lot of memory.
Maybe ROMs could be supported with the iotlb variant -
not sure, but there seems to be no good reason for virtio
to try to do DMA from ROM. So let's just skip ROM memory.
Suggested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
msix_init() reports errors with error_report(), which is wrong when
it's used in realize(). The same issue was fixed for msi_init() in
commit 1108b2f. In order to make the API change as small as possible,
leave the return value check to later patch.
For some devices(like e1000e, vmxnet3, nvme) who won't fail because of
msix_init's failure, suppress the error report by passing NULL error
object.
Bonus: add comment for msix_init.
CC: Jiri Pirko <jiri@resnulli.us>
CC: Gerd Hoffmann <kraxel@redhat.com>
CC: Dmitry Fleytman <dmitry@daynix.com>
CC: Jason Wang <jasowang@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Hannes Reinecke <hare@suse.de>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
usb_xhci_realize() corrects invalid values of property "intrs"
automatically, but the uncorrected value is passed to msi_init(),
which chokes on invalid values. Delay that until after the
correction.
Resources allocated by usb_xhci_init() are leaked when msi_init()
fails. Fix by calling it after msi_init().
CC: Gerd Hoffmann <kraxel@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The missing of 'nvdimm' in the machine type option '-M' means NVDIMM
is disabled. QEMU should refuse to plug any NVDIMM device in this case
and report the misconfiguration.
The behavior of NVDIMM on unsupported platform (HW/FW) is vendor
specific. For some vendors, it's undefined and the platform may do
anything. Thus, I think QEMU is free to choose the implementation.
Aborting QEMU (i.e. refusing to boot) is the easiest one.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Message-Id: 20170112110928.GF4621@stefanha-x1.localdomain
Message-Id: 20170111093630.2088-1-stefanha@redhat.com
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The Generic Root Port behaves almost the same as the
Intel's IOH device with id 3420, without having
Intel specific attributes.
The device has two purposes:
(1) Can be used on both X86 and ARM machines.
(2) It will allow us to tweak the behaviour
(e.g add vendor-specific PCI capabilities)
- something that obviously cannot be done
on a known device.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Preserve only Intel specific details.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The 'base' PCI Express Root Port includes
the common code to be re-used for all
Root Ports implementations. Most of the code
was taken from the current implementation
of Intel's IOH 3420 Root Port.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't use 1ULL which is wrong during size calculation. Fix it, and
while at it, switch to use cto64() and adds a comments to make it
simpler and easier to be understood.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Looks like we didn't mark PCI ROMs as RO allowing
mischief such as guests writing there.
Further, e.g. vhost gets confused trying to allocate
enough space to log writes there. Fix it up.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
We are switching BUILD_BUG_ON to verify that it's parameter is a
compile-time constant, and it turns out that some gcc versions
(specifically gcc (Ubuntu 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609) are
not smart enough to figure it out for expressions involving local
variables. This is harmless but means that the check is ineffective for
these platforms. To fix, replace the variable with macros.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are a number of unused trace events that
scripts/cleanup-trace-events.pl finds. The "hw/vfio/pci-quirks.c"
filename was typoed and "qapi/qapi-visit-core.c" was missing the qapi/
directory prefix.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170126171613.1399-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce rules in the top level Makefile that are able to generate
trace.[ch] files in every subdirectory which has a trace-events file.
The top level directory is handled specially, so instead of creating
trace.h, it creates trace-root.h. This allows sub-directories to
include the top level trace-root.h file, without ambiguity wrt to
the trace.g file in the current sub-dir.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170125161417.31949-7-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The trace-events for a given source file should generally
always live in the same directory as the source file.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170125161417.31949-5-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The trace-events for a given source file should generally
always live in the same directory as the source file.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170125161417.31949-4-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The trace-events for a given source file should generally
always live in the same directory as the source file.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170125161417.31949-3-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We are switching BUILD_BUG_ON to verify that it's parameter is a
compile-time constant, and it turns out that some gcc versions
(specifically gcc (Ubuntu 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609) are
not smart enough to figure it out for expressions involving local
variables. This is harmless but means that the check is ineffective for
these platforms. To fix, replace variables with macros.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This enables the ps2 controller to process mouse events for buttons 4 and 5.
Additionally, distinct definitions for the ps2 mouse button state are
introduced. The legacy definitions from console.h are not used anymore.
Signed-off-by: Fabian Lesniak <fabian@lesniak-it.de>
Message-id: 20161206190007.7539-3-fabian@lesniak-it.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We are switching BUILD_BUG_ON to verify that it's parameter is a
compile-time constant, and it turns out that some gcc versions
(specifically gcc (Ubuntu 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609) are
not smart enough to figure it out for expressions involving local
variables. This is harmless but means that the check is ineffective for
these platforms. To fix, replace the variable with macros.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
[dwg: Correct a printf format warning]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is a port to ppc of the i386 commit:
00f4d64 kvmclock: clock should count only if vm is running
We remove timebase_post_load function, and use the VM state
change handler to save and restore the guest_timebase (on stop
and continue).
We keep timebase_pre_save to reduce the clock difference on
migration like in:
6053a86 kvmclock: reduce kvmclock difference on migration
Time base offset has originally been introduced by commit
98a8b52 spapr: Add support for time base offset migration
So while VM is paused, the time is stopped. This allows to have
the same result with date (based on Time Base Register) and
hwclock (based on "get-time-of-day" RTAS call).
Moreover in TCG mode, the Time Base is always paused, so this
patch also adjust the behavior between TCG and KVM.
VM state field "time_of_the_day_ns" is now useless but we keep
it to be able to migrate to older version of the machine.
As vmstate_ppc_timebase structure (with timebase_pre_save() and
timebase_post_load() functions) was only used by vmstate_spapr,
we register the VM state change handler only in ppc_spapr_init().
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It is completely unused, thus it can be removed without problems.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If the DECAR register is set to 0, QEMU tries to reload the decrementer with
zero in an inifinite loop. According to PPC documentation, the decrementer is
triggered on 1->0 transition, so avoid reloading the decrementer if if is
already zero.
The problem does not manifest under Linux, but it is valid to set DECAR to zero
(and may make sense as part of decrementer initialization when interrupts are
disabled).
Signed-off-by: Roman Kapl <rka@sysgo.com>
[dwg: Fixed style nit]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Once a compatiblity mode is negotiated with the guest,
h_client_architecture_support() uses run_on_cpu() to update each CPU to
the new mode. We're going to want this logic somewhere else shortly,
so make a helper function to do this global update.
We put it in target-ppc/compat.c - it makes as much sense at the CPU level
as it does at the machine level. We also move the cpu_synchronize_state()
into ppc_set_compat(), since it doesn't really make any sense to call that
without synchronizing state.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
During boot, PAPR guests negotiate CPU model support with the
ibm,client-architecture-support mechanism. The logic to implement this in
qemu is very convoluted. This cleans it up to be cleaner, using the new
ppc_check_compat() call.
The new logic for choosing a compatibility mode is:
1. Usually, use the most recent compatibility mode that is
a) supported by the guest
b) supported by the CPU
and c) no later than the maximum allowed (if specified)
2. If no suitable compatibility mode was found, the guest *does*
support this CPU explicitly, and no maximum compatibility mode is
specified, then use "raw" mode for the current CPU
3. Otherwise, fail the boot.
This differs from the results of the old code: the old code preferred using
"raw" mode to a compatibility mode, whereas the new code prefers a
compatibility mode if available. Using compatibility mode preferentially
means that we're more likely to be able to migrate the guest to a similar
but not identical host.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PCI Expander Bridge (PXB) device is essentially a hack to allow
different PCIe devices to be assigned to different NUMA nodes on x86. Each
PXB is sort-of a separate PCI host bridge, except that its config space
is shared with the config space of the main PCI host bridge, rather than
being independent.
This is only necessary if the platform doesn't (easily) allow truly
independent PCI host bridges. AFAIK that's just x86.
This patch makes it possible to configure PXB out of the build, and adjusts
the default configs so it's only included on x86 targets.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Machine supports both Open Hack'Ware and OpenBIOS.
Open Hack'Ware is the default because OpenBIOS is currently unable to boot
PReP boot partitions or PReP kernels.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
[dwg: Correct compile failure with KVM located by Thomas Huth]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Added CONFIG_RS6000_MC to ppc64 or it breaks testcases]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This device is a partial duplicate of System I/O device available in hw/ppc/prep.c
This new one doesn't have all the Motorola-specific registers.
The old one should be deprecated and removed with the 'prep' machine.
Partial documentation available at
ftp://ftp.software.ibm.com/rs6000/technology/spec/srp1_1.exe
section 6.1.5 (I/O Device Mapping)
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Drop the old SysBus init function and use instance_init
* Change mpc8xxx_gpio_reset to a DeviceClass::reset function
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
To continue consolidation of compatibility mode information, this rewrites
the ppc_get_compat_smt_threads() function using the table of compatiblity
modes in target-ppc/compat.c.
It's not a direct replacement, the new ppc_compat_max_threads() function
has simpler semantics - it just returns the number of threads the cpu
model has, taking into account any compatiblity mode it is in.
This no longer takes into account kvmppc_smt_threads() as the previous
version did. That check wasn't useful because we check in
ppc_cpu_realizefn() that CPUs aren't instantiated with more threads
than kvm allows (or if we didn't things will already be broken and
this won't make it any worse).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
When passing through an USB storage device to a pseries guest, it
is currently not possible to automatically boot from the device
if the "bootindex" property has been specified, too (e.g. when using
"-device nec-usb-xhci -device usb-host,hostbus=1,hostaddr=2,bootindex=0"
at the command line). The problem is that QEMU builds a device tree path
like "/pci@800000020000000/usb@0/usb-host@1" and passes it to SLOF
in the /chosen/qemu,boot-list property. SLOF, however, probes the
USB device, recognizes that it is a storage device and thus changes
its name to "storage", and additionally adds a child node for the
SCSI LUN, so the correct boot path in SLOF is something like
"/pci@800000020000000/usb@0/storage@1/disk@101000000000000" instead.
So when we detect an USB mass storage device with SCSI interface,
we've got to adjust the firmware boot-device path properly that
SLOF can automatically boot from the device.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1354177
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The H_SIGNAL_SYS_RESET hcall allows a guest CPU to raise a system reset
exception on CPUs within the same guest -- all CPUs, all-but-self, or a
specific CPU (including self).
This has not made its way to a PAPR release yet, but we have an hcall
number assigned.
H_SIGNAL_SYS_RESET = 0x380
Syntax:
hcall(uint64 H_SIGNAL_SYS_RESET, int64 target);
Generate a system reset NMI on the threads indicated by target.
Values for target:
-1 = target all online threads including the caller
-2 = target all online threads except for the caller
All other negative values: reserved
Positive values: The thread to be targeted, obtained from the value
of the "ibm,ppc-interrupt-server#s" property of the CPU in the OF
device tree.
Semantics:
- Invalid target: return H_Parameter.
- Otherwise: Generate a system reset NMI on target thread(s),
return H_Success.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The 'cpu_version' field in PowerPCCPU is badly named. It's named after the
'cpu-version' device tree property where it is advertised, but that meaning
may not be obvious in most places it appears.
Worse, it doesn't even really correspond to that device tree property. The
property contains either the processor's PVR, or, if the CPU is running in
a compatibility mode, a special "logical PVR" representing which mode.
Rename the cpu_version field, and a number of related variables to
compat_pvr to make this clearer.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The pseries machine type is a bit unusual in that it runs a paravirtualized
guest. The guest expects to interact with a hypervisor, and qemu
emulates the functions of that hypervisor directly, rather than executing
hypervisor code within the emulated system.
To implement this in TCG, we need to intercept hypercall instructions and
direct them to the machine's hypercall handlers, rather than attempting to
perform a privilege change within TCG. This is controlled by a global
hook - cpu_ppc_hypercall.
This cleanup makes the handling a little cleaner and more extensible than
a single global variable. Instead, each CPU to have hypercalls intercepted
has a pointer set to a QOM object implementing a new virtual hypervisor
interface. A method in that interface is called by TCG when it sees a
hypercall instruction. It's possible we may want to add other methods in
future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
spapr_h_cas_compose_response() includes a cpu_update parameter which
controls whether it includes updated information on the CPUs in the device
tree fragment returned from the ibm,client-architecture-support (CAS) call.
Providing the updated information is essential when CAS has negotiated
compatibility options which require different cpu information to be
presented to the guest. However, it should be safe to provide in other
cases (it will just override the existing data in the device tree with
identical data). This simplifies the code by removing the parameter and
always providing the cpu update information.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Currently the pseries machine has two paths for constructing CPUs. On
newer machine type versions, which support cpu hotplug, it constructs
cpu core objects, which in turn construct CPU threads. For older machine
versions it individually constructs the CPU threads.
This division is going to make some future changes to the cpu construction
harder, so this patch unifies them. Now cpu core objects are always
created. This requires some updates to allow core objects to be created
without a full complement of threads (since older versions allowed a
number of cpus not a multiple of the threads-per-core). Likewise it needs
some changes to the cpu core hot/cold plug path so as not to choke on the
old machine types without hotplug support.
For good measure, we move the cpu construction to its own subfunction,
spapr_init_cpus().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
The Xen HVM unplug protocol [1] specifies a mechanism to allow guests to
request unplug of 'aux' disks (which is stated to mean all IDE disks,
except the primary master). This patch adds support for that unplug request.
NOTE: The semantics of what happens if unplug of all disks and 'aux' disks
is simultaneously requests is not clear. The patch makes that
assumption that an 'all' request overrides an 'aux' request.
[1] http://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/misc/hvm-emulated-unplug.markdown
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
----
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: John Snow <jsnow@redhat.com>
...not just IDE and SCSI.
This patch allows the Xen tool-stack to fully support of NVMe as an
emulated disk type. See [1] for the relevant tool-stack patch discussion.
[1] https://lists.xen.org/archives/html/xen-devel/2017-01/msg01225.html
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The current code is poorly structured and potentially leads to multiple
config space reads when one is sufficient. Also the UNPLUG_ALL_IDE_DISKS
flag is mis-named since it also results in SCSI disks being unplugged.
This patch renames the flag and re-structures the code to be more
efficient, and readable.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Turn Chardev into Object.
qemu_chr_alloc() is replaced by the qemu_chardev_new() constructor. It
will call qemu_char_open() to open/intialize the chardev with the
ChardevCommon *backend settings.
The CharDriver::create() callback is turned into a ChardevClass::open()
which is called from the newly introduced qemu_chardev_open().
"chardev-gdb" and "chardev-hci" are internal chardev and aren't
creatable directly with -chardev. Use a new internal flag to disable
them. We may want to use TYPE_USER_CREATABLE interface instead, or
perhaps allow -chardev usage.
Although in general we keep typename and macros private, unless the type
is being used by some other file, in this patch, all types and common
helper macros for qemu-char.c are in char.h. This is to help transition
now (some types must be declared early, while some aren't shared) and
when splitting in several units. This is to be improved later.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pick a uniform chardev type name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use common allocator for CharDriverState.
Rename the now untouched parent field.
The casts added are temporary, they are replaced with QOM type-safe
macros in a later patch in this series.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a single allocation for CharDriverState, this avoids extra
allocations & pointers, and is a step towards more object-oriented
CharDriver.
Gtk console is a bit peculiar, gd_vc_chr_set_echo() used to have a
temporary VirtualConsole to save the echo bit. Instead now, we consider
whether vcd->console is set or not, and restore the echo bit saved in
VCDriverState when calling gd_vc_vte_init().
The casts added are temporary, they are replaced with QOM type-safe
macros in a later patch in this series.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This makes the code more declarative, and avoids duplicating the
information on all instances.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running with debug enabled, the scsi-generic cdb that is
dumped skips byte 0 of the command, which is the opcode. This
makes identifying which command is being issued/completed a
little difficult. Example:
0x00 0x00 0x01 0x00 0x00
scsi-generic: scsi_read_data 0x0
scsi-generic: Data ready tag=0x0 len=164
scsi-generic: scsi_read_data 0x0
scsi-generic: Command complete 0x0x10a42c60 tag=0x0 status=0
Improve this by adding a message prior to the loop, similar to
what exists for scsi-disk. Clean up a few other messages to be
more explicit of what is being represented. Example:
scsi-generic: Command: data=0x12 0x00 0x00 0x01 0x00 0x00
scsi-generic: scsi_read_data tag=0x0
scsi-generic: Data ready tag=0x0 len=164
scsi-generic: scsi_read_data tag=0x0
scsi-generic: Command complete 0x0x10a452d0 tag=0x0 status=0
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Message-Id: <20170120162527.66075-2-farman@linux.vnet.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that CPUs show up in the help text of "-device ?",
we should group them into an appropriate category.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1484917276-7107-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The generic edk2 SMM infrastructure prefers
EFI_SMM_CONTROL2_PROTOCOL.Trigger() to inject an SMI on each processor. If
Trigger() only brings the current processor into SMM, then edk2 handles it
in the following ways:
(1) If Trigger() is executed by the BSP (which is guaranteed before
ExitBootServices(), but is not necessarily true at runtime), then:
(a) If edk2 has been configured for "traditional" SMM synchronization,
then the BSP sends directed SMIs to the APs with APIC delivery,
bringing them into SMM individually. Then the BSP runs the SMI
handler / dispatcher.
(b) If edk2 has been configured for "relaxed" SMM synchronization,
then the APs that are not already in SMM are not brought in, and
the BSP runs the SMI handler / dispatcher.
(2) If Trigger() is executed by an AP (which is possible after
ExitBootServices(), and can be forced e.g. by "taskset -c 1
efibootmgr"), then the AP in question brings in the BSP with a
directed SMI, and the BSP runs the SMI handler / dispatcher.
The smaller problem with (1a) and (2) is that the BSP and AP
synchronization is slow. For example, the "taskset -c 1 efibootmgr"
command from (2) can take more than 3 seconds to complete, because
efibootmgr accesses non-volatile UEFI variables intensively.
The larger problem is that QEMU's current behavior diverges from the
behavior usually seen on physical hardware, and that keeps exposing
obscure corner cases, race conditions and other instabilities in edk2,
which generally expects / prefers a software SMI to affect all CPUs at
once.
Therefore introduce the "broadcast SMI" feature that causes QEMU to inject
the SMI on all VCPUs.
While the original posting of this patch
<http://lists.nongnu.org/archive/html/qemu-devel/2015-10/msg05658.html>
only intended to speed up (2), based on our recent "stress testing" of SMM
this patch actually provides functional improvements.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20170126014416.11211-3-lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce the following fw_cfg files:
- "etc/smi/supported-features": a little endian uint64_t feature bitmap,
presenting the features known by the host to the guest. Read-only for
the guest.
The content of this file will be determined via bit-granularity ICH9-LPC
device properties, to be introduced later. For now, the bitmask is left
zeroed. The bits will be set from machine type compat properties and on
the QEMU command line, hence this file is not migrated.
- "etc/smi/requested-features": a little endian uint64_t feature bitmap,
representing the features the guest would like to request. Read-write
for the guest.
The guest can freely (re)write this file, it has no direct consequence.
Initial value is zero. A nonzero value causes the SMI-related fw_cfg
files and fields that are under guest influence to be migrated.
- "etc/smi/features-ok": contains a uint8_t value, and it is read-only for
the guest. When the guest selects the associated fw_cfg key, the guest
features are validated against the host features. In case of error, the
negotiation doesn't proceed, and the "features-ok" file remains zero. In
case of success, the "features-ok" file becomes (uint8_t)1, and the
negotiated features are locked down internally (to which no further
changes are possible until reset).
The initial value is zero. A nonzero value causes the SMI-related
fw_cfg files and fields that are under guest influence to be migrated.
The C-language fields backing the "supported-features" and
"requested-features" files are uint8_t arrays. This is because they carry
guest-side representation (our choice is little endian), while
VMSTATE_UINT64() assumes / implies host-side endianness for any uint64_t
fields. If we migrate a guest between hosts with different endiannesses
(which is possible with TCG), then the host-side value is preserved, and
the host-side representation is translated. This would be visible to the
guest through fw_cfg, unless we used plain byte arrays. So we do.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20170126014416.11211-2-lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch implements saving/restoring of static apic_delivered variable.
v8: saving static variable only for one of the APICs
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20170126123429.5412.94368.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch disables the update of the periodic timer of mc146818rtc
in record/replay mode. State of this timer is saved and therefore does
not need to be updated in record/replay mode.
Read of RTC breaks the replay because all rtc reads have to be the same
as in record mode.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20170124071730.4572.41874.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvmvapic patches the code when some instructions are executed.
E.g. mov 0xff, 0xfffe0080 is interpreted as push 0xff/call ...
This patching is also followed by some side effects (changing apic
and guest memory state). Therefore deterministic execution should take
this operation into account. This patch decreases icount when original
mov instruction is trying to execute. Therefore patching becomes
deterministic and can be replayed correctly.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20170124071702.4572.17294.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When setting dma channel 'data_type', if (value & 3) == 3,
the set 'data_type' is said to be bad. This also leads to an
OOB access in 'omap_dma_transfer_generic', while doing
cpu_physical_memory_r/w operations. Add check to avoid it.
Reported-by: Jiang Xin <jiangxin1@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 20170127120528.30959-1-ppandit@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a broken expression in the calculation of ELRSR
register bits: instead of "(lr & ICH_LR_EL2_HW) == 1"
we want to check for != 0, because the HW bit is not
bit 0 so a test for == 1 is always false.
Fixes: https://bugs.launchpad.net/bugs/1658506
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1485255993-6322-1-git-send-email-peter.maydell@linaro.org
The frame_size local variable in exynos4210_uart_update_parameters()
is calculated but never used (and has been this way since the
device was introduced in commit e5a4914efc). The qemu_chr_fe_ioctl()
doesn't need this information (if it really wanted it it could
calculate it from the parity/data_bits/stop_bits), so just drop
the variable entirely.
Fixes: https://bugs.launchpad.net/bugs/1655702
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1484589515-26353-1-git-send-email-peter.maydell@linaro.org
When the guest attempts to start an MII register
access via the MCTL register, clear the START bit,
so that when the guest reads it back the register
transaction will be signalled as having completed.
This avoids the guest spinning as it polls the
START bit waiting for it to clear (which it
previously never would).
The MII registers themselves still aren't implemented,
but at least we can avoid guests spending quite so much
time busy waiting.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1484938222-1423-1-git-send-email-peter.maydell@linaro.org
[PMM: expand commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CCR.USERSETMPEND bit has to be set to permit unprivileged code to
write to the Software Triggered Interrupt register; honour this bit
rather than letting any code write to the register.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-9-git-send-email-peter.maydell@linaro.org
[PMM: Tweak commit message, comment, phrasing of condition]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the v7M system registers CCR, CFSR, HFSR, DFSR, BFAR and
MMFAR. For the moment these simply read as written (with some basic
handling of RAZ/WI bits and W1C semantics).
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-5-git-send-email-peter.maydell@linaro.org
[PMM: drop warning about setting unimplemented CCR bits;
tweak commit message; add DFSR]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Many NVIC operations access the CPU state, so store a pointer in
struct nvic_state rather than fetching it via qemu_get_cpu() every
time we need it.
As with the arm_gicv3_common code, we currently just call
qemu_get_cpu() in the NVIC's realize method, but in future we might
want to use a QOM property to pass the CPU to the NVIC.
This imposes an ordering requirement that the CPU is
realized before the NVIC, but that is always true since
both are dealt with in armv7m_init().
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-3-git-send-email-peter.maydell@linaro.org
[PMM: Use qemu_get_cpu(0) rather than first_cpu; expand
commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For configurations of the pflash_cfi01 device which set it up with a
device-width not equal to the width (ie where we are emulating
multiple narrow flash devices wired up in parallel), we were giving
incorrect values in the CFI data table:
(1) the sector length entry should specify the sector length for a
single device, not the length for the overall collection of
devices
(2) the number of blocks per device must not be divided by the
number of devices because the resulting device size would not
match the overall size
(3) this then means that the overall write block size must be
modified depending on the number of devices because the entry is
per device and when the guest writes into the flash it
calculates the write size by using the CFI entry (write size
per device) multiplied by the number of chips.
(It would alternatively be possible to modify the write
block size in the CFI table (currently hardcoded at 2048) and
leave the overall write block size alone.)
This commit corrects these bugs, and adds a hw-compat property
to retain the old behaviour on 2.8 and earlier versions. (The
only board we have which uses this sort of flash config and
has machine versioning is the "virt" board -- the PC uses a
single flash device and so behaviour is unaffected whether
using old-multiple-chip-handling or not.)
Here is a configuration example from the vexpress board:
VEXPRESS_FLASH_SIZE = 64M
VEXPRESS_FLASH_SECT_SIZE 256K
num-blocks = VEXPRESS_FLASH_SIZE / VEXPRESS_FLASH_SECT_SIZE = 256
sector-length = 256K
width = 4
device-width = 2
The code will fill the CFI entry with the following entries:
num-blocks = 256
sector-length = 128K
writeblock_size = 2048
This results in two chips, each with 256 * 128K = 32M device size and
a write block size of 2048.
A sector erase will be sent to both chips, thus 256K must be erased.
When the guest sends a block write command, it will write 4096 bytes
data at once (2048 per device).
Signed-off-by: David Engraf <david.engraf@sysgo.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: cleaned up and expanded commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For v7m we need to catch attempts to execute from special
addresses at 0xfffffff0 and above. Previously we did this
with the aid of a hacky special purpose lump of memory
in the address space and a check in translate.c for whether
we were translating code at those addresses.
We can implement this more cleanly using a CPU
unassigned access handler which throws the exception
if the unassigned access is for one of the special addresses.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1484937883-1068-3-git-send-email-peter.maydell@linaro.org
[PMM:
* drop the deletion of the "don't interrupt if PC is magic"
code in arm_v7m_cpu_exec_interrupt() -- this is still
required
* don't generate an exception for unassigned accesses
which aren't to the magic address -- although doing
this is in theory correct in practice it will break
currently working guests which rely on the RAZ/WI
behaviour when they touch devices which we haven't
modelled.
* trigger EXCP_EXCEPTION_EXIT on is_exec, not !is_write
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When doing fast read, a certain amount of dummy bytes should be sent
before the read. This number is configurable in the controler CE0
Control Register and needs to be modeled using fake transfers to the
flash module.
This only supports command mode. User mode requires more work and a
possible extension of the m25p80 device model.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Marcin Krzemiński <mar.krzeminski@gmail.com>
Message-id: 1484751701-2646-1-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2c21ee7 ("migration: extend VMStateInfo") missed a void -> int
return conversion for kvm_flic_save().
Fixes: 2c21ee7 ("migration: extend VMStateInfo")
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
cause 9p clients to hang. Other patches are minor enhancements.
-----BEGIN PGP SIGNATURE-----
iEYEABECAAYFAliIegsACgkQAvw66wEB28LjzwCeIKbBFC/hbc43UqaNX82OGd2v
soYAn0YYXJUAykyjNEMLdhhNp+rABzNk
=1PaE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
This pull request fixes a 2.9 regression and a long standing bug that can
cause 9p clients to hang. Other patches are minor enhancements.
# gpg: Signature made Wed 25 Jan 2017 10:12:27 GMT
# gpg: using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@fr.ibm.com>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>"
# gpg: aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
9pfs: fix offset error in v9fs_xattr_read()
9pfs: local: trivial cosmetic fix in pwritev op
9pfs: fix off-by-one error in PDU free list
tests: virtio-9p: improve error reporting
9pfs: add missing coroutine_fn annotations
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current code tries to copy `read_count' bytes starting at offset
`offset' from a `read_count`-sized iovec. This causes v9fs_pack() to
fail with ENOBUFS.
Since the PDU iovec is already partially filled with `offset' bytes,
let's skip them when creating `qiov_full' and have v9fs_pack() to
copy the whole of it. Moreover, this is consistent with the other
places where v9fs_init_qiov_from_pdu() is called.
This fixes commit "bcb8998fac16 9pfs: call v9fs_init_qiov_from_pdu
before v9fs_pack".
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The server can handle MAX_REQ - 1 PDUs at a time and the virtio-9p
device has a MAX_REQ sized virtqueue. If the client manages to fill
up the virtqueue, pdu_alloc() will fail and the request won't be
processed without any notice to the client (it actually causes the
linux 9p client to hang).
This has been there since the beginning (commit 9f10751365 "virtio-9p:
Add a virtio 9p device to qemu"), but it needs an agressive workload to
run in the guest to show up.
We actually allocate MAX_REQ PDUs and I see no reason not to link them
all into the free list, so let's fix the init loop.
Reported-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Greg Kurz <groug@kaod.org>
Add the Altera 10M50 Nios2 GHRD model. This allows emulating the
10M50 development kit with the Nios2 GHRD loaded in the FPGA. It
is possible to boot Linux kernel and run userspace, thus far only
from initrd as storage support is not yet implemented.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chris Wulff <crwulff@gmail.com>
Cc: Jeff Da Silva <jdasilva@altera.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Sandra Loosemore <sandra@codesourcery.com>
Cc: Yves Vandervennet <yvanderv@altera.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-Id: <20170118220146.489-7-marex@denx.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Add the Altera timer model.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chris Wulff <crwulff@gmail.com>
Cc: Jeff Da Silva <jdasilva@altera.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Sandra Loosemore <sandra@codesourcery.com>
Cc: Yves Vandervennet <yvanderv@altera.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-Id: <20170118220146.489-6-marex@denx.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Add the Altera Nios2 internal interrupt controller model.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chris Wulff <crwulff@gmail.com>
Cc: Jeff Da Silva <jdasilva@altera.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Sandra Loosemore <sandra@codesourcery.com>
Cc: Yves Vandervennet <yvanderv@altera.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-Id: <20170118220146.489-5-marex@denx.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
It has "bridge" in its name, so it should be in the category
DEVICE_CATEGORY_BRIDGE.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It's a storage device, so let's classify it accordingly. And
while we're at it, also add a short description for people who
do not know what MTP means.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 166dbda7e1 added some extra cases to a switch() such
that the existing code is intended to fall through the new
case statements. It's clear from the commit that this is
intentional, but less clear to subsequent readers of the
code, and not clear at all to static analysis tools like
Coverity. Add a /* fall through */ comment to indicate the
intent. (Fixes CID 1368287.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Coverity points out that calculating src_len by multiplying
src_width by rows could overflow. This can only happen in
the implausible case of a framebuffer larger than 4GB, but
we may as well fix it, placating Coverity. (CID1005515)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Don't truncate the multiplication and do a 64 bit one instead
because the result is stored in a 64 bit variable.
This fixes a similar coverity warning to commit 237a8650d6,
in a similar way, and is the other half of the fix for
coverity CID 1167561.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The patch_hypercalls() function sets up a 'patches'
variable and checks it at the end of the function, but
never modifies it in the middle. Remove this dead code,
which seems to have been present since the function was
added in commit e5ad936b0f in 2012.
(Spotted by Coverity: CID 1005581.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Just check the errno value after fopen and follow it with fstat.
This shuts up Coverity's complaint about TOC/TOU violation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The vmstate_pci_device and vmstate_pcie_devices differ
just in the size of one buffer; combine the two using a _TEST
macro.
I think this is safe as long as everywhere which currently
uses either of these two uses the right type.
One thing that concerns me is that some places use pci_device_load/save
which does some irq mangling, but others just use the VMSTATE_PCI_DEVICE
macro - how are they getting the same irq mangling?
This passes a smoke test migrate of:
./x86_64-softmmu/qemu-system-x86_64 -M pc,accel=kvm -m 1024
./littlefed20.img -device e1000e -device virtio-net -device
e1000 -device virtio-rng -device megasas -device megasas-gen2 -device
ioh3420 -device nec-usb-xhci
to an unmodified qemu.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20161214195829.18241-1-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If a migration is already in progress and somebody attempts
to add a migration blocker, this should rightly fail.
Add an errp parameter and a retcode return value to migrate_add_blocker.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1484566314-3987-5-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Merged with recent 'Allow invtsc migration' change
Introduce checks for the unmigratable flag in the VMStateDescription
structs of respective devices when user attempts to add them. If the
"--only-migratable" was specified, all unmigratable devices will
rightly fail to add. This feature is made compatible for both "-device"
and "-usbdevice" command line options and covers their hmp and qmp
counterparts as well.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1484566314-3987-4-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Current migration code cannot handle some data structures such as
QTAILQ in qemu/queue.h. Here we extend the signatures of put/get
in VMStateInfo so that customized handling is supported. put now
will return int type.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Message-Id: <1484852453-12728-2-git-send-email-duanj@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Sometimes it is useful to have just a machine with CPU and RAM, without
any further hardware in it, e.g. if you just want to do some instruction
debugging for TCG with a remote GDB attached to QEMU, or run some embedded
code with the "-semihosting" QEMU parameter. qemu-system-m68k already
features a "dummy" machine, and xtensa a "sim" machine for exactly this
purpose.
All target architectures have nowadays also a "none" machine, which would
be a perfect match for this, too - but it currently does not allow to add
CPU and RAM yet. Thus let's add these possibilities in a generic way to the
"none" machine, too, so that we hopefully do not need additional "dummy"
machines in the future anymore (and maybe can also get rid of the already
existing "dummy"/"sim" machines one day).
Note that the default behaviour of the "none" machine is not changed, i.e.
no CPU and no RAM is instantiated by default. You have explicitely got to
specify the CPU model with "-cpu" and the amount of RAM with "-m" to get
these new features.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1484743490-24721-1-git-send-email-thuth@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
make sure that external callers won't try to modify
possible_cpus and owner of possible_cpus can access
it directly when it modifies it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1484759609-264075-5-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
move smbios_set_cpuid() close to the rest of smbios init code
where it belongs to instead of calling it from pc_cpus_init().
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1484759609-264075-3-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
- rework of the zpci code, giving us proper multibus support
- introduction of the 2.9 machine
- fixes and improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fzmu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20170120-v2' into staging
First set of s390x patches for 2.9:
- rework of the zpci code, giving us proper multibus support
- introduction of the 2.9 machine
- fixes and improvements
# gpg: Signature made Fri 20 Jan 2017 09:11:58 GMT
# gpg: using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20170120-v2:
virtio-ccw: fix ring sizing
s390x/pci: merge msix init functions
s390x/pci: handle PCIBridge bus number
s390x/pci: use hashtable to look up zpci via fh
s390x/pci: PCI multibus bridge handling
s390x/pci: optimize calling s390_get_phb()
s390x/pci: change the device array to a list
s390x/pci: dynamically allocate iommu
s390x/pci: make S390PCIIOMMU inherit Object
s390x/kvm: use kvm_gsi_routing_enabled in flic
s390x: add compat machine for 2.9
s390x: remove double compat statement
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJYgXzxAAoJEO8Ells5jWIRgtAIAKuFrOBE/xJnjd/45sVKcx2j
fsohKHF8T/eLmt5sw+MhGtnM/oRJRUX8kGpA9AU8m6TCSaTYh2tOKX5lwrykuAzk
feqz2pqZFwiLWs5Ro7qEQIhMkqtFetODvKd05qnKnAldj8SC45czKxdghmSP/B+w
4nnDEdqVqUuUseDCa1mW1b4f6g1N93LbgChK7lK9Xqg+OqeEbQ7nLgVvcWvN7+Ea
DfDKWP8tjQ5QhjzFWc4wa9/Tx+0HI7Dn57fv98XdJMvm1kt/MdnO7QKAXWmHH5s/
6DX+NHgN0ZAn85gv/ufq1F9C4TstbAoZA9EOGhoBJ5ww8mueARB3L2iCj+OcS9A=
=gkbh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Fri 20 Jan 2017 02:58:57 GMT
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
tap: fix memory leak on failure in net_init_tap()
hw/pci: use-after-free in pci_nic_init_nofail when nic device fails to initialize
hw/net/dp8393x: Avoid unintentional sign extensions on addresses
m68k: QOMify the MCF Fast Ethernet Controller device
net: optimize checksum computation
docs: Fix description of the sentence
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
writeable fw cfg blobs which will be used for guest to host
communication
fixes and cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYgSq0AAoJECgfDbjSjVRpHtwH/j/viN38ginAvuRiPssEiitb
VC3oO09siMx+rO97H7ur5cVcwiyMFxG90Dtmsptf3r46hzgUcv4meC4zzNG3Xds6
Iwsqy1m3nQDEL1dbU7XbhfbrWAGCiY1I+O2JRSvHQ8+HsmP6vOLxPPEQTlFRQIrk
k9HHlMHo2tYU0hhSOOoDDG/mBG8QcYgIaGleCMrVBlV/Q6w7lnD8XVgPWjEF5RsG
2SkbY+JQJlmt6qZpkbdQKox4cHFxlA8f6P9ne1o++gjVENhbe6KrDFhROE560Lbn
dtypZV6Y0Pt6SMrk+lR2Gd2DHI/10LhNVi/mz6o1HrCzmISJlIxIvXD6XmhqdPk=
=7hNY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost, pc: fixes, features
writeable fw cfg blobs which will be used for guest to host
communication
fixes and cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 19 Jan 2017 21:08:04 GMT
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio: force VIRTIO_F_IOMMU_PLATFORM
virtio: fix up max size checks
vhost: drop VHOST_F_DEVICE_IOTLB
update-linux-headers.sh: support __bitwise
virtio_crypto: header update
pci_regs: update to latest linux
virtio-mmio: switch to linux headers
virtio_mmio: add standard header file
virtio: drop an obsolete comment
fw-cfg: bump "x-file-slots" to 0x20 for 2.9+ machine types
pc: Add 2.9 machine-types
fw-cfg: turn FW_CFG_FILE_SLOTS into a device property
fw-cfg: support writeable blobs
vhost_net: device IOTLB support
virtio: disable notifications again after poll succeeded
Revert "virtio: turn vq->notification into a nested counter"
virtio-net: enable ioeventfd even if vhost=off
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a board level property to the virt board which will
enable EL2 on the CPU if the user asks for it. The
default is not to provide EL2. If EL2 is enabled then
we will use SMC as our PSCI conduit, and report the
virtualization support in the GICv3 device tree node
and the ACPI tables.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1483977924-14522-19-git-send-email-peter.maydell@linaro.org
Enable the ARM_FEATURE_EL2 bit on Cortex-A52 and
Cortex-A57, since this is all now sufficiently implemented
to work with the GICv3. We provide the usual CPU property
to disable it for backwards compatibility with the older
virt boards.
In this commit, we disable the EL2 feature on the
virt and ZynpMP boards, so there is no overall effect.
Another commit will expose a board-level property to
allow the user to enable EL2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1483977924-14522-18-git-send-email-peter.maydell@linaro.org
Signed-off-by: Andrew Jones <drjones@redhat.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1483977924-14522-16-git-send-email-peter.maydell@linaro.org
[PMM: look at vms->psci_conduit rather than vms->virt
to decide whether to use HVC or SMC, and report no
PSCI support at all for the 'PSCI disabled' case]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we are giving the guest a CPU with EL2, it is likely to
want to use the HVC instruction itself, for instance for
providing PSCI to inner guest VMs. This makes using HVC
as the PSCI conduit for the outer QEMU a bad idea. We will
want to use SMC instead is this case: this makes sense
because QEMU's PSCI implementation is effectively an
emulation of functionality provided by EL3 firmware.
Add code to support selecting the PSCI conduit to use,
rather than hardcoding use of HVC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1483977924-14522-15-git-send-email-peter.maydell@linaro.org
Implement the architecturally required traps from NS EL1
to EL2 for the CPU interface registers. These fall into
several different groups:
* group-0-only registers all trap if ICH_HRC_EL2.TALL0 is set
(exactly the registers covered by gicv3_fiq_access())
* group-1-only registers all trap if ICH_HRC_EL2.TALL1 is set
(exactly the registers covered by gicv3_irq_access())
* DIR traps if ICH_HCR_EL2.TC or ICH_HCR_EL2.TDIR are set
* PMR, RPR, CTLR trap if ICH_HCR_EL2.TC is set
* SGI0R, SGI1R, ASGI1R trap if ICH_HCR_EL2.TC is set or
if HCR_EL2.IMO or HCR_EL2.FMO are set
We split DIR and the SGI registers out into their own access
functions, leaving the existing gicv3_irqfiq_access() just
handling PMR, RPR and CTLR.
This commit doesn't implement support for trapping on
HSTR_EL2.T12 for the 32-bit registers, as we don't implement
any of those per-coprocessor trap bits currently and
probably will want to do those in some more centralized way.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1483977924-14522-14-git-send-email-peter.maydell@linaro.org
Implement the function which signals virtual interrupts to the
CPU as appropriate following CPU interface state changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1483977924-14522-13-git-send-email-peter.maydell@linaro.org
If the HCR_EL2.IMO or FMO bits are set, accesses to ICC_
system registers are redirected to be accesses to ICV_
registers (the guest-visible interface to the virtual
interrupt controller). Implement this behaviour for the
ICV_ registers which are simple accessors to the underlying
register state.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1483977924-14522-10-git-send-email-peter.maydell@linaro.org
The GICv3 virtualization interface includes system registers
accessible only to the hypervisor which form the control
interface for interrupt virtualization. Implement these
registers.
The function gicv3_cpuif_virt_update() which determines
whether it needs to signal vIRQ, vFIQ or a maintenance
interrupt is introduced here as a stub function -- its
implementation will be added in a subsequent commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1483977924-14522-9-git-send-email-peter.maydell@linaro.org
As the first step in adding support for the virtualization
extensions to the GICv3 emulation:
* add the necessary data fields to the state structures
* add the fields to the migration state, as a subsection
which is only present if virtualization is enabled
The use of a subsection means we retain migration
compatibility as EL2 is not enabled on any CPUs currently.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1483977924-14522-8-git-send-email-peter.maydell@linaro.org
Add defines to gicv3_internal.h for fields in the ICH_*
system registers which form the GIC virtualization control
interface.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1483977924-14522-7-git-send-email-peter.maydell@linaro.org
Wire the new VIRQ, VFIQ and maintenance interrupt lines from the
GIC to each CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1483977924-14522-5-git-send-email-peter.maydell@linaro.org
Augment the GIC's QOM device interface by adding two
new sets of sysbus IRQ lines, to signal VIRQ and VFIQ to
each CPU.
We never use these, but it's helpful to keep the v2-and-earlier
GIC's external interface in line with that of the GICv3 to
avoid board code having to add extra code conditional on which
version of the GIC is in use.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1483977924-14522-3-git-send-email-peter.maydell@linaro.org
Augment the GICv3's QOM device interface by adding two
new sets of sysbus IRQ lines, to signal VIRQ and VFIQ to
each CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1483977924-14522-2-git-send-email-peter.maydell@linaro.org
Linux for arm64 v4.10 and later will complain if the ECAM config space is
not reserved in the ACPI namespace:
acpi PNP0A08:00: [Firmware Bug]: ECAM area [mem 0x3f000000-0x3fffffff] not reserved in ACPI namespace
The rationale is that OSes that don't consume the MCFG table should still
be able to infer that the PCI config space MMIO region is occupied.
So update the ACPI table generation routine to add this reservation.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1484328738-21149-1-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using -cpu cortex-a9 (or any other unsupported CPU) with the virt
board will cause QEMU to segmentation fault. This bug was introduced
in commit 9ac4ef77, which incorrectly added a NULL terminator when
converting the VirtBoardInfo array into a simple array of strings
defining the valid CPUs. The cpuname_valid() loop already has
a termination condition based on ARRAY_SIZE, so the NULL is
spurious and causes the strcmp() to segfault if we reach it.
Delete the NULL.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1484619334-10488-1-git-send-email-zhaoshenglong@huawei.com
[PMM: expanded commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a ROM region, using the default size of the mapping window for
the CE0 FMC flash module, and fill it with the flash content.
This is a little hacky but until we can boot from a MMIO region, it
seems difficult to do anything else.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1483979087-32663-11-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Aspeed SMC controllers have a mode (Command mode) in which
accesses to the flash content are no different than doing MMIOs. The
controller generates all the necessary commands to load (or store)
data in memory.
However, accesses are restricted to the segment window assigned the
the flash module by the controller. This window is defined by the
Segment Address Register.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1483979087-32663-8-git-send-email-clg@kaod.org
[PMM: Deleted now-unused aspeed_smc_is_usermode() function]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SPI controller of the AST2400 SoC has less registers. So we can
adjust the size of the memory region holding the registers depending
on the controller type. We can also remove the guest_error logging
which is useless as the range of the region is strict enough.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 1483979087-32663-7-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is getting difficult to read. Also add a 'has_dma' field for each
controller type.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1483979087-32663-6-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On the AST2500 SoC, the FMC controller flash type is fixed to SPI for
CE0 and CE1 and 4BYTE mode is autodetected for CE0.
On the AST2400 SoC, the FMC controller flash type and 4BYTE mode are
strapped with register SCU70. We use the default settings from the
palmetto-bmc machine for now.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1483979087-32663-5-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change the routines prototype to use a 'AspeedSMCFlash *' instead of
'AspeedSMCState *'. The result will help in making future changes
clearer.
Also change aspeed_smc_update_cs() which uselessly loops on all slave
devices to update their status.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1483979087-32663-4-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead, we can simply set the irq level when unselecting the slave
devices. This change prepares ground for a subsequent cleanup of the
aspeed_smc_update_cs() routine which uselessly loops on all slaves to
update their status.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1483979087-32663-3-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is useless as reset will be called later on.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Marcin Krzemiński <mar.krzeminski@gmail.com>
Message-id: 1483979087-32663-2-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
n25q00 and mt25q01 devices share the same JEDEC ID. The difference
between those two devices is number of dies and one bit in extended
JEDEC bytes. This commit adds proper entry for both devices by
introduction the number of dies and and new 25q00 entries.
Signed-off-by: Marcin Krzeminski <mar.krzeminski@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20170108083854.5006-4-mar.krzeminski@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Modern big flash NOR devices consist of more than one die.
Some of them do not support chip erase and instead have a die
erase command that can erase one die only. This commit adds
support for defining the number of dies in the chip, and adds
support for die erase command.
The NOR flash model is not strict, so no option to
disable chip erase has been added.
Signed-off-by: Marcin Krzeminski <mar.krzeminski@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20170108083854.5006-3-mar.krzeminski@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some flash chips have additional page program opcode that
takes only 4 byte address. This commit adds support
for such command in Qemu.
Signed-off-by: Marcin Krzeminski <mar.krzeminski@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20170108083854.5006-2-mar.krzeminski@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The imx25 chip provides 3 i2c buses, but they have all been named
"i2c", which makes it difficult to predict which bus a device will
be connected to when specified on the command line.
This patch addresses the issue by naming the buses uniquely:
i2c-bus.0 i2c-bus.1 i2c-bus.2
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Message-id: 20170105043430.3176-2-alastair@au1.ibm.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Current code seems to assume ring size is
always decreased but this is not required by spec:
what spec says is just that size can not exceed
the maximum. Fix it up.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1484256243-1982-1-git-send-email-mst@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Currently there're two functions, s390_pci_setup_msix() and
s390_pci_msix_init(), for msix initialization, and being called once
for each zpci device plugging. Let's integrate them.
Moreover msix is mandatory in s390 architecture. So we ensure the pci
device being plugged supports msix. For vfio (which is the only tested
setup so far), nothing changes.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The PCI bus number is usually set by the host during the enumeration.
In the s390 architecture we neither get a Device Tree nor have an
enumeration understanding bridge devices.
Let's fake the enumeration on reset and set the PCI_PRIMARY_BUS,
PCI_SECONDARY_BUS and PCI_SUBORDINATE_BUS config entries for the
bridges.
Let's add the configuration of these three config entries on bridge hot
plug.
The bus number is calculated based on a new entry, bus_num of the
S390pciState device.
This commit is inspired by what spapr pci does.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
After PCI multibus is supported, more than 32 PCI devices could be
plugged. The current implementation of s390_pci_find_dev_by_fh()
appears low performance if there's a huge number of PCI devices
plugged. Therefore we introduce a hashtable using idx as key to store
zpci device's pointer on account of translating fh to idx very easily.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
When the hotplug handler detects a PCI bridge, the secondary bus has
been initialized by the core PCI code. We give the secondary bus the
bridge name and associate to it the IOMMU handling and
hotplug/hotunplug callbacks.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
A function may recursively call device search functions or may call
serveral different device search function. Passing the S390pciState to
search functions as an argument instead of looking up it inside the
search functions lowers the number of calling s390_get_phb().
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
In order to support a greater number of devices we use a QTAILQ
list of devices instead of a limited array.
This leads us to change:
- every lookup function s390_pci_find_xxx() for QTAILQ
- the FH_MASK_INDEX to index up to 65536 devices
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
When initializing a PCI device, an address space is required during PCI
core initialization and before the call to the embedding object hotplug
callback. To provide this AS, we allocate a S390PCIIOMMU object
containing this AS. Initialization of S390PCIIOMMU object is done
before the PCI device is completely created. So that we cannot
associate the IOMMU with the device at the moment. To track the IOMMU
object, we use g_hash functions with the PCI device's bus address as a
key to provide an array of pointers indexed by the PCI device's devfn
to the allocated IOMMU.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Currently S390PCIIOMMU is a normal struct. Let's make it inherit Object
in order to take advantage of QOM. In addition, we move some stuff
related to IOMMU from S390PCIBusDevice to S390PCIIOMMU.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's use kvm_gsi_routing_enabled() to check if kvm supports
KVM_CAP_IRQ_ROUTING in order to avoid a needless ioctl invocation.
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We chain our compat handler via the CCW_COMPAT macros and via the
class_init function. (e.g. ccw_machine_2_7_class_options calls
ccw_machine_2_8_class_options). As all class_init functions in that
chain call SET_MACHINE_COMPAT for their compat settings, and
SET_MACHINE_COMPAT will append there is no need to do that again.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
object_property_set_bool(OBJECT(dev), true, "realized", &err) in
pci_nic_init_nofail may release the object if device fails to
initialize which leads to use-after-free in error handling block.
qdev_init_nofail does the same thing while holding the reference.
(gdb) run -net nic
qemu-system-x86_64: failed to find romfile "efi-e1000.rom"
Program received signal SIGSEGV, Segmentation fault.
object_unparent (obj=0x7fffe96a0010) at qom/object.c:440
440 in qom/object.c
(gdb) bt
<nd_table>, rootbus=0x5555567ed990, default_model=<optimized out>,
default_devaddr=<optimized out>) at hw/pci/pci.c:1812
pci_bus=0x5555567ed990) at hw/i386/pc.c:1634
pci_type=0x555555c1a523 "i440FX", host_type=0x555555ba564e
"i440FX-pcihost") at hw/i386/pc_piix.c:241
out>, envp=<optimized out>) at vl.c:4481
Signed-off-by: Alex Kompel <barbos@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The dp8393x has several 32-bit values which are formed by concatenating
two 16 bit device register values. Attempting to do these inline
with ((s->reg[HI] << 16) | s->reg[LO]) can result in an unintended
sign extension because "x << 16" is of type 'int' even though s->reg
is unsigned, and so if the expression is used in a context where
it is cast to uint64_t the value is incorrectly sign-extended.
Fix this by using accessor functions with a uint32_t return type;
this also makes the code a bit easier to read.
This should fix Coverity issues 1307765, 1307766, 1307767, 1307768.
(To avoid having a ctda read function only used in a DPRINTF,
we move the DPRINTF down slightly so it can use the ttda function.)
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When running qemu-system-m68k with the "-net" parameter (for example
simply "-net nic -net user"), there is currently a confusing warning
message saying:
Warning: requested NIC (anonymous, model mcf_fec) was not created
(not supported by this machine?)
This seems to happen because the MCF NIC has never been adapted to
the currently expected QEMU device behavior. Thus let's QOMify the
NIC now to get rid of the warning message.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Use the Intel HAX is kernel-based hardware acceleration module for
Windows (similar to KVM on Linux).
Based on the "target/i386: Add Intel HAX to android emulator" patch
from David Chou <david.j.chou@intel.com>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Message-Id: <7b9cae28a0c379ab459c7a8545c9a39762bd394f.1484045952.git.vpalatin@chromium.org>
[Drop hax_populate_ram stub. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the generic cpu_synchronize_ functions to the common hw_accel.h header,
in order to prepare for the addition of a second hardware accelerator.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Message-Id: <f5c3cffe8d520011df1c2e5437bb814989b48332.1484045952.git.vpalatin@chromium.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We allow vhost to clear VIRITO_F_IOMMU_PLATFORM which is wrong since
VIRTIO_F_IOMMU_PLATFORM is mandatory for security. Fixing this by
enforce it after vdc->get_features().
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
